aboutsummaryrefslogtreecommitdiff
path: root/apps/gendsa.c
AgeCommit message (Collapse)AuthorFilesLines
2020-04-23Update copyright yearMatt Caswell1-1/+1
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/11616)
2020-04-21gendsa: remove unnecessary OPENSSL_SUPPRESS_DEPRECATED definitionPauli1-3/+0
Reviewed-by: Paul Yang <kaishen.yy@antfin.com> (Merged from https://github.com/openssl/openssl/pull/11570)
2020-04-19gendsa: update command line app to use EVP callsPauli1-2/+30
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org> (Merged from https://github.com/openssl/openssl/pull/11225)
2020-04-10Don't compile commands if disabledRich Salz1-19/+15
Rather than wrapping whole files in "ifndef OPENSSL_NO_xxx" we handle the changes in build.info Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/11250)
2020-03-07cmdline app: add provider commandline options.Pauli1-1/+6
Add a -provider option to allow providers to be loaded. This option can be specified multiple times. Add a -provider_path option to allow the path to providers to be specified. Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org> (Merged from https://github.com/openssl/openssl/pull/11167)
2020-02-14Apps: don't build deprecated DH and DSA apps.Pauli1-1/+1
This also means that there doesn't need to be any conditional checks in the .c files to avoid deprecated builds. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/11067)
2020-02-12dsa: deprecate applications that depend on the low level DSA functions.Pauli1-1/+4
speed is updated to not support DSA instead of being removed. The dhparam, dsaparam, dsa and gendsa commands are deprecated but still exist without NO_DEPRECATED defined. Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/10977)
2019-11-20Document command parameters.Rich Salz1-1/+4
Add documentation for all commands that have parameters. Fix a couple of minor doc and programming bugs, too. Fixes #10313 Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org> (Merged from https://github.com/openssl/openssl/pull/10371)
2019-11-08Add "sections" to -help outputRich Salz1-4/+7
Remove "Valid options" label, since all commands have sections (and [almost] always the first one is "General options"). Have "list --options" ignore section headers Reformat ts's additional help Add output section Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org> Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/9953)
2019-05-01gendsa: dsaparam: introduce -verbose option to enable outputPhilip Prindeville1-3/+8
Other commands like 'req' support -verbose, so why not gendsa and dsaparam? Part of a larger and more ambitious effort to add -verbose to all apps that might be used in scripts and need to otherwise run silently (well, without belching out anything that isn't a warning or error... which ties into a later scrub of using STDOUT were appropriate for informative messages instead of STDERR)... so that scripts also have the option of doing >/dev/null without losing anything critical. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/6908)
2018-12-06Following the license change, modify the boilerplates in apps/Richard Levitte1-1/+1
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7765)
2018-06-05Issue warnings for large DSA and RSA keysGeorg Schmidt1-0/+7
Issue a warning when generating DSA or RSA keys of size greater than OPENSSL_DSA_MAX_MODULUS_BITS resp. OPENSSL_RSA_MAX_MODULUS_BITS. Reviewed-by: Paul Dale <paul.dale@oracle.com> Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/6380)
2018-02-13Update copyright yearMatt Caswell1-1/+1
Reviewed-by: Richard Levitte <levitte@openssl.org>
2018-01-31apps: Don't include progs.h in apps.hRichard Levitte1-0/+1
Everything in apps includes apps.h, because that one declares apps internal library routines. However, progs.h doesn't declare library routines, but rather the main commands and their options, and there's no reason why the library modules should include it. So, remove the inclusion of progs.h from apps.h and add that inclusion in all command source files. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5222)
2017-10-18Remove parentheses of return.KaoruToda1-1/+1
Since return is inconsistent, I removed unnecessary parentheses and unified them. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4541)
2017-07-16Standardize apps use of -rand, etc.Rich Salz1-16/+7
Standardized the -rand flag and added a new one: -rand file... Always reads the specified files -writerand file Always writes to the file on exit For apps that use a config file, the RANDFILE config parameter reads the file at startup (to seed the RNG) and write to it on exit if the -writerand flag isn't used. Ensured that every app that took -rand also took -writerand, and made sure all of that agreed with all the documentation. Fix error reporting in write_file and -rand Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/3862)
2016-10-19If an engine comes up explicitely, it must also come down explicitelyRichard Levitte1-1/+3
In apps/apps.c, one can set up an engine with setup_engine(). However, we freed the structural reference immediately, which means that for engines that don't already have a structural reference somewhere else (because it's a built in engine), we end up returning an invalid reference. Instead, the function release_engine() is added, and called at the end of the routines that call setup_engine(). Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1643)
2016-10-14Constify command optionsFdaSilvaYY1-1/+1
Reviewed-by: Kurt Roeckx <kurt@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1694)
2016-09-19Fix various missing option help messages ...FdaSilvaYY1-1/+1
Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1585)
2016-06-15Deal with the consequences of constifying gettersRichard Levitte1-1/+1
Reviewed-by: Stephen Henson <steve@openssl.org> Reviewed-by: Emilia Käsper <emilia@openssl.org>
2016-05-17Copyright consolidation 01/10Rich Salz1-54/+6
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Kurt Roeckx <kurt@openssl.org>
2016-04-03Make DSA_METHOD opaqueMatt Caswell1-1/+3
Move the dsa_method structure out of the public header file, and provide getter and setter functions for creating and modifying custom DSA_METHODs. Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Stephen Henson <steve@openssl.org>
2016-04-03Make the DSA structure opaqueMatt Caswell1-1/+1
Move the dsa_st structure out of the public header file. Add some accessor functions to enable access to the internal fields, and update all internal usage to use the new functions. Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Stephen Henson <steve@openssl.org>
2016-02-09Use NON_EMPTY_TRANSLATION_UNIT, consistently.Rich Salz1-8/+5
This also closes RT 4123 Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-10-23Remove useless codeAlessandro Ghedini1-2/+0
RT#4081 Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-10-12Centralise loading default apps config fileMatt Caswell1-3/+0
Loading the config file after processing command line options can cause problems, e.g. where an engine provides new ciphers/digests these are not then recoginised on the command line. Move the default config file loading to before the command line option processing. Whilst we're doing this we might as well centralise this instead of doing it individually for each application. Finally if we do it before the OpenSSL_add_ssl_algorithms() call then ciphersuites provided by an engine (e.g. GOST) can be available to the apps. RT#4085 RT#4086 Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-09-06Change the way apps open their input and output filesRichard Levitte1-2/+2
The different apps had the liberty to decide whether they would open their input and output files in binary mode or not, which could be confusing if two different apps were handling the same type of file in different ways. The solution is to centralise the decision of low level file organisation, and that the apps would use a selection of formats to state the intent of the file. Reviewed-by: Tim Hudson <tjh@openssl.org>
2015-06-15RT2547: Tighten perms on generated privkey filesRich Salz1-2/+4
When generating a private key, try to make the output file be readable only by the owner. Put it in CHANGES file since it might be noticeable. Add "int private" flag to apps that write private keys, and check that it's set whenever we do write a private key. Checked via assert so that this bug (security-related) gets fixed. Thanks to Viktor for help in tracing the code-paths where private keys are written. Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
2015-06-02Standardize handling of #ifdef'd options.Rich Salz1-1/+1
Here are the "rules" for handling flags that depend on #ifdef: - Do not ifdef the enum. Only ifdef the OPTIONS table. All ifdef'd entries appear at the end; by convention "engine" is last. This ensures that at run-time, the flag will never be recognized/allowed. The next two bullets entries are for silencing compiler warnings: - In the while/switch parsing statement, use #ifdef for the body to disable it; leave the "case OPT_xxx:" and "break" statements outside the ifdef/ifndef. See ciphers.c for example. - If there are multiple options controlled by a single guard, OPT_FOO, OPT_BAR, etc., put a an #ifdef around the set, and then do "#else" and a series of case labels and a break. See OPENSSL_NO_AES in cms.c for example. Reviewed-by: Matt Caswell <matt@openssl.org>
2015-05-29Restore module loadingRichard Levitte1-0/+3
The module loading feature got broken a while ago, so restore it, but have it a bit more explicit this time around. Reviewed-by: Stephen Henson <steve@openssl.org>
2015-05-01free null cleanup finaleRich Salz1-2/+1
Don't check for NULL before calling OPENSSL_free Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-04-25fewer NO_ENGINE #ifdef'sRich Salz1-6/+2
Make setup_engine be a dummy if NO_ENGINE is enabled. The option is not enabled if NO_ENGINE is enabled, so the one "wasted" variable just sits there. Removes some variables and code. Reviewed-by: Richard Levitte <levitte@openssl.org>
2015-04-24Big apps cleanup (option-parsing, etc)Rich Salz1-154/+69
This is merges the old "rsalz-monolith" branch over to master. The biggest change is that option parsing switch from cascasding 'else if strcmp("-foo")' to a utility routine and somethin akin to getopt. Also, an error in the command line no longer prints the full summary; use -help (or --help :) for that. There have been many other changes and code-cleanup, see bullet list below. Special thanks to Matt for the long and detailed code review. TEMPORARY: For now, comment out CRYPTO_mem_leaks() at end of main Tickets closed: RT3515: Use 3DES in pkcs12 if built with no-rc2 RT1766: s_client -reconnect and -starttls broke RT2932: Catch write errors RT2604: port should be 'unsigned short' RT2983: total_bytes undeclared #ifdef RENEG RT1523: Add -nocert to fix output in x509 app RT3508: Remove unused variable introduced by b09eb24 RT3511: doc fix; req default serial is random RT1325,2973: Add more extensions to c_rehash RT2119,3407: Updated to dgst.pod RT2379: Additional typo fix RT2693: Extra include of string.h RT2880: HFS is case-insensitive filenames RT3246: req command prints version number wrong Other changes; incompatibilities marked with *: Add SCSV support Add -misalign to speed command Make dhparam, dsaparam, ecparam, x509 output C in proper style Make some internal ocsp.c functions void Only display cert usages with -help in verify Use global bio_err, remove "BIO*err" parameter from functions For filenames, - always means stdin (or stdout as appropriate) Add aliases for -des/aes "wrap" ciphers. *Remove support for IISSGC (server gated crypto) *The undocumented OCSP -header flag is now "-header name=value" *Documented the OCSP -header flag Reviewed-by: Matt Caswell <matt@openssl.org>
2015-03-25free NULL cleanupRich Salz1-4/+2
This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free BIO_free BIO_free_all BIO_vfree Reviewed-by: Matt Caswell <matt@openssl.org>
2015-03-24free NULL cleanupRich Salz1-2/+1
Start ensuring all OpenSSL "free" routines allow NULL, and remove any if check before calling them. This gets DH_free, DSA_free, RSA_free Reviewed-by: Matt Caswell <matt@openssl.org>
2015-01-22Run util/openssl-format-source -v -c .Matt Caswell1-208/+210
Reviewed-by: Tim Hudson <tjh@openssl.org>
2010-06-12Fix warnings.Ben Laurie1-4/+1
2009-04-26Update from 1.0.0-stable.Dr. Stephen Henson1-0/+6
2007-04-23Add SEED encryption algorithm.Bodo Möller1-0/+8
PR: 1503 Submitted by: KISA Reviewed by: Bodo Moeller
2006-06-09Camellia cipher, contributed by NTTBodo Möller1-0/+12
Submitted by: Masashi Fujita Reviewed by: Bodo Moeller
2005-07-16makeNils Larsch1-0/+1
./configure no-deprecated [no-dsa] [no-dh] [no-ec] [no-rsa] make depend all test work again PR: 1159
2003-01-30Add the possibility to build without the ENGINE framework.Richard Levitte1-0/+10
PR: 287
2002-12-03EXIT() may mean return(). That's confusing, so let's have it really meanRichard Levitte1-1/+1
exit() in whatever way works for the intended platform, and define OPENSSL_EXIT() to have the old meaning (the name is of course because it's only used in the openssl program)
2002-02-22Config code updates.Dr. Stephen Henson1-0/+3
CONF_modules_unload() now calls CONF_modules_finish() automatically. Default use of section openssl_conf moved to CONF_modules_load() Load config file in several openssl utilities. Most utilities now load modules from the config file, though in a few (such as version) this isn't done because it couldn't be used for anything. In the case of ca and req the config file used is the same as the utility itself: that is the -config command line option can be used to specify an alternative file.
2002-02-20Add AES support in the applications that support -des and -des3.Richard Levitte1-0/+12
2001-09-12Reduce the header dependencies on engine.h in apps/.Geoff Thorpe1-1/+0
2001-06-23Use apps_shutdown() in all applications, in case someone decides notRichard Levitte1-0/+1
to go the monolith way (does anyone do that these days?). NOTE: a few applications are missing in this commit. I've a few more changes in them that I haven't tested yet.
2001-06-19make apps compile againDr. Stephen Henson1-1/+1
2001-06-18Provide an application-common setup function for engines and use itRichard Levitte1-17/+1
everywhere.
2001-03-09Change the EVP_somecipher() and EVP_somedigest()Dr. Stephen Henson1-1/+1
functions to return constant EVP_MD and EVP_CIPHER pointers. Update docs.
generated by cgit v1.1 at 2024-07-13 14:49:39 +0000