29 files changed, 408 insertions, 83 deletions
diff --git a/doc/apps/ca.pod b/doc/apps/ca.pod
index 2ffffaa..9ff0cc3 100644
--- a/doc/apps/ca.pod
+++ b/doc/apps/ca.pod
@@ -217,7 +217,7 @@ used).
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<ca>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/ciphers.pod b/doc/apps/ciphers.pod
index 22c219b..7c6608d 100644
--- a/doc/apps/ciphers.pod
+++ b/doc/apps/ciphers.pod
@@ -251,6 +251,33 @@ cipher suites using MD5.
 
 cipher suites using SHA1.
 
+=item B<aGOST> 
+
+cipher suites using GOST R 34.10 (either 2001 or 94) for authenticaction
+(needs an engine supporting GOST algorithms). 
+
+=item B<aGOST01>
+
+cipher suites using GOST R 34.10-2001 authentication.
+
+=item B<aGOST94>
+
+cipher suites using GOST R 34.10-94 authentication (note that R 34.10-94
+standard has been expired so use GOST R 34.10-2001)
+
+=item B<kGOST>
+
+cipher suites, using VKO 34.10 key exchange, specified in the RFC 4357.
+
+=item B<GOST94>
+
+cipher suites, using HMAC based on GOST R 34.11-94.
+
+=item B<GOST89MAC>
+
+cipher suites using GOST 28147-89 MAC B<instead of> HMAC.
+
+
 =back
 
 =head1 CIPHER SUITE NAMES
@@ -376,6 +403,16 @@ e.g. DES-CBC3-SHA. In these cases, RSA authentication is used.
 
  TLS_DH_anon_WITH_SEED_CBC_SHA          ADH-SEED-SHA
 
+=head2 GOST ciphersuites from draft-chudov-cryptopro-cptls, extending TLS v1.0
+
+Note: these ciphers require an engine which including GOST cryptographic
+algorithms, such as the B<ccgost> engine, included in the OpenSSL distribution.
+
+ TLS_GOSTR341094_WITH_28147_CNT_IMIT GOST94-GOST89-GOST89
+ TLS_GOSTR341001_WITH_28147_CNT_IMIT GOST2001-GOST89-GOST89
+ TLS_GOSTR341094_WITH_NULL_GOSTR3411 GOST94-NULL-GOST94
+ TLS_GOSTR341001_WITH_NULL_GOSTR3411 GOST2001-NULL-GOST94
+
 =head2 Additional Export 1024 and other cipher suites
 
 Note: these ciphers can also be used in SSL v3.
diff --git a/doc/apps/cms.pod b/doc/apps/cms.pod
index 7bc7e65..520279e 100644
--- a/doc/apps/cms.pod
+++ b/doc/apps/cms.pod
@@ -36,17 +36,7 @@ B<openssl> B<cms>
 [B<-CAfile file>]
 [B<-CApath dir>]
 [B<-md digest>]
-[B<-des>]
-[B<-des3>]
-[B<-rc2-40>]
-[B<-rc2-64>]
-[B<-rc2-128>]
-[B<-aes128>]
-[B<-aes192>]
-[B<-aes256>]
-[B<-camellia128>]
-[B<-camellia192>]
-[B<-camellia256>]
+[B<-[cipher]>]
 [B<-nointern>]
 [B<-no_signer_cert_verify>]
 [B<-nocerts>]
@@ -253,13 +243,13 @@ to each certificate.
 digest algorithm to use when signing or resigning. If not present then the
 default digest algorithm for the signing key will be used (usually SHA1).
 
-=item B<-des -des3 -rc2-40 -rc2-64 -rc2-128 -aes128 -aes192 -aes256 -camellia128 -camellia192 -camellia256>
+=item B<-[cipher]>
 
-the encryption algorithm to use. DES (56 bits), triple DES (168 bits), 40, 64
-or 128 bit RC2, 128, 192 or 256 bit AES, or 128, 192 or 256 bit Camellia
-respectively. Any other cipher name (as recognized by the
+the encryption algorithm to use. For example triple DES (168 bits) - B<-des3>
+or 256 bit AES - B<-aes256>. Any standard algorithm name (as used by the
 EVP_get_cipherbyname() function) can also be used preceded by a dash, for 
-example B<-aes_128_cbc>.
+example B<-aes_128_cbc>. See L<B<enc>|enc(1)> for a list of ciphers
+supported by your version of OpenSSL.
 
 If not specified triple DES is used. Only used with B<-encrypt> and 
 B<-EncryptedData_create> commands.
@@ -411,6 +401,11 @@ portion of a message so they may be included manually. If signing
 then many S/MIME mail clients check the signers certificate's email
 address matches that specified in the From: address.
 
+=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy>
+
+Set various certificate chain valiadition option. See the
+L<B<verify>|verify(1)> manual page for details.
+
 =back
 
 =head1 NOTES
diff --git a/doc/apps/dgst.pod b/doc/apps/dgst.pod
index 908cd2a..b035edf 100644
--- a/doc/apps/dgst.pod
+++ b/doc/apps/dgst.pod
@@ -14,6 +14,7 @@ B<openssl> B<dgst>
 [B<-binary>]
 [B<-out filename>]
 [B<-sign filename>]
+[B<-keyform arg>]
 [B<-passin arg>]
 [B<-verify filename>]
 [B<-prverify filename>]
@@ -61,6 +62,23 @@ filename to output to, or standard output by default.
 
 digitally sign the digest using the private key in "filename".
 
+=item B<-keyform arg>
+
+Specifies the key format to sign digest with. Only PEM and ENGINE
+formats are supported by the B<dgst> command.
+
+=item B<-engine id>
+
+Use engine B<id> for operations (including private key storage).
+This engine is not used as source for digest algorithms, unless it is
+also specified in the configuration file.
+
+=item B<-sigopt nm:v>
+
+Pass options to the signature algorithm during sign or verify operations.
+Names and values of these options are algorithm-specific.
+
+
 =item B<-passin arg>
 
 the private key password source. For more information about the format of B<arg>
@@ -83,6 +101,35 @@ the actual signature to verify.
 
 create a hashed MAC using "key".
 
+=item B<-mac alg>
+
+create MAC (keyed Message Authentication Code). The most popular MAC
+algorithm is HMAC (hash-based MAC), but there are other MAC algorithms
+which are not based on hash, for instance B<gost-mac> algorithm,
+supported by B<ccgost> engine. MAC keys and other options should be set
+via B<-macopt> parameter.
+
+=item B<-macopt nm:v>
+
+Passes options to MAC algorithm, specified by B<-mac> key.
+Following options are supported by both by B<HMAC> and B<gost-mac>:
+
+=over 8
+
+=item B<key:string>
+	
+Specifies MAC key as alphnumeric string (use if key contain printable
+characters only). String length must conform to any restrictions of
+the MAC algorithm for example exactly 32 chars for gost-mac.
+
+=item B<hexkey:string>
+
+Specifies MAC key in hexadecimal form (two hex digits per byte).
+Key length must conform to any restrictions of the MAC algorithm
+for example exactly 32 chars for gost-mac.
+
+=back
+
 =item B<-rand file(s)>
 
 a file or files containing random data used to seed the random number
diff --git a/doc/apps/dhparam.pod b/doc/apps/dhparam.pod
index c31db95..9edb4ff 100644
--- a/doc/apps/dhparam.pod
+++ b/doc/apps/dhparam.pod
@@ -99,7 +99,7 @@ be loaded by calling the B<get_dh>I<numbits>B<()> function.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<dhparam>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/dsa.pod b/doc/apps/dsa.pod
index ed06b88..ddbc932 100644
--- a/doc/apps/dsa.pod
+++ b/doc/apps/dsa.pod
@@ -109,7 +109,7 @@ a public key.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<dsa>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/dsaparam.pod b/doc/apps/dsaparam.pod
index b9b1b93..ba5ec4d 100644
--- a/doc/apps/dsaparam.pod
+++ b/doc/apps/dsaparam.pod
@@ -85,7 +85,7 @@ the input file (if any) is ignored.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<dsaparam>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/ec.pod b/doc/apps/ec.pod
index 1d4a36d..ba6dc46 100644
--- a/doc/apps/ec.pod
+++ b/doc/apps/ec.pod
@@ -130,7 +130,7 @@ is currently not implemented in OpenSSL.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<ec>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/ecparam.pod b/doc/apps/ecparam.pod
index 1a12105..788c074 100644
--- a/doc/apps/ecparam.pod
+++ b/doc/apps/ecparam.pod
@@ -121,7 +121,7 @@ all others.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<ecparam>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/enc.pod b/doc/apps/enc.pod
index 4391c93..018365b 100644
--- a/doc/apps/enc.pod
+++ b/doc/apps/enc.pod
@@ -12,17 +12,24 @@ B<openssl enc -ciphername>
 [B<-pass arg>]
 [B<-e>]
 [B<-d>]
-[B<-a>]
+[B<-a/-base64>]
 [B<-A>]
 [B<-k password>]
 [B<-kfile filename>]
 [B<-K key>]
 [B<-iv IV>]
+[B<-S salt>]
+[B<-salt>]
+[B<-nosalt>]
+[B<-z>]
+[B<-md>]
 [B<-p>]
 [B<-P>]
 [B<-bufsize number>]
 [B<-nopad>]
 [B<-debug>]
+[B<-none>]
+[B<-engine id>]
 
 =head1 DESCRIPTION
 
@@ -74,6 +81,10 @@ base64 process the data. This means that if encryption is taking place
 the data is base64 encoded after encryption. If decryption is set then
 the input data is base64 decoded before being decrypted.
 
+=item B<-base64>
+
+same as B<-a>
+
 =item B<-A>
 
 if the B<-a> option is set then base64 process the data on one line.
@@ -89,10 +100,18 @@ read the password to derive the key from the first line of B<filename>.
 This is for compatibility with previous versions of OpenSSL. Superseded by
 the B<-pass> argument.
 
+=item B<-nosalt>
+
+do not use a salt 
+
+=item B<-salt>
+
+use salt (randomly generated or provide with B<-S> option) when
+encrypting (this is the default).
+
 =item B<-S salt>
 
-the actual salt to use: this must be represented as a string comprised only
-of hex digits.
+the actual salt to use: this must be represented as a string of hex digits.
 
 =item B<-K key>
 
@@ -131,12 +150,34 @@ disable standard block padding
 
 debug the BIOs used for I/O.
 
+=item B<-z>
+
+Compress or decompress clear text using zlib before encryption or after
+decryption. This option exists only if OpenSSL with compiled with zlib
+or zlib-dynamic option.
+
+=item B<-none>
+
+Use NULL cipher (no encryption or decryption of input).
+
 =back
 
 =head1 NOTES
 
 The program can be called either as B<openssl ciphername> or
-B<openssl enc -ciphername>.
+B<openssl enc -ciphername>. But the first form doesn't work with
+engine-provided ciphers, because this form is processed before the
+configuration file is read and any ENGINEs loaded.
+
+Engines which provide entirely new encryption algorithms (such as ccgost
+engine which provides gost89 algorithm) should be configured in the
+configuration file. Engines, specified in the command line using -engine
+options can only be used for hadrware-assisted implementations of
+ciphers, which are supported by OpenSSL core or other engine, specified
+in the configuration file.
+
+When enc command lists supported ciphers, ciphers provided by engines,
+specified in the configuration files are listed too.
 
 A password will be prompted for to derive the key and IV if necessary.
 
@@ -169,6 +210,14 @@ Blowfish and RC5 algorithms use a 128 bit key.
 
 =head1 SUPPORTED CIPHERS
 
+Note that some of these ciphers can be disabled at compile time
+and some are available only if an appropriate engine is configured
+in the configuration file. The output of the B<enc> command run with
+unsupported options (for example B<openssl enc -help>) includes a
+list of ciphers, supported by your versesion of OpenSSL, including
+ones provided by configured engines.
+
+
  base64             Base 64
 
  bf-cbc             Blowfish in CBC mode
@@ -203,6 +252,9 @@ Blowfish and RC5 algorithms use a 128 bit key.
 
  desx               DESX algorithm.
 
+ gost89             GOST 28147-89 in CFB mode (provided by ccgost engine)
+ gost89-cnt        `GOST 28147-89 in CNT mode (provided by ccgost engine) 
+
  idea-cbc           IDEA algorithm in CBC mode
  idea               same as idea-cbc
  idea-cfb           IDEA in CFB mode
diff --git a/doc/apps/gendsa.pod b/doc/apps/gendsa.pod
index 2c56cc7..8c7f114 100644
--- a/doc/apps/gendsa.pod
+++ b/doc/apps/gendsa.pod
@@ -40,7 +40,7 @@ all others.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<gendsa>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/genpkey.pod b/doc/apps/genpkey.pod
index 69c7a05..1611b5c 100644
--- a/doc/apps/genpkey.pod
+++ b/doc/apps/genpkey.pod
@@ -47,7 +47,7 @@ name accepted by EVP_get_cipherbyname() is acceptable such as B<des3>.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<genpkey>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms. If used this option should precede all other
@@ -138,6 +138,37 @@ the EC curve to use.
 
 =back
 
+=head1 GOST2001 KEY GENERATION AND PARAMETER OPTIONS
+
+Gost 2001 support is not enabled by default. To enable this algorithm,
+one should load the ccgost engine in the OpenSSL configuration file.
+See README.gost file in the engines/ccgost directiry of the source
+distribution for more details.
+
+Use of a parameter file for the GOST R 34.10 algorithm is optional.
+Parameters can be specified during key generation directly as well as
+during generation of parameter file.
+
+=over 4
+
+=item B<paramset:name>
+
+Specifies GOST R 34.10-2001 parameter set according to RFC 4357.
+Parameter set can be specified using abbreviated name, object short name or
+numeric OID. Following parameter sets are supported:
+
+  paramset   OID               Usage
+  A          1.2.643.2.2.35.1  Signature
+  B          1.2.643.2.2.35.2  Signature
+  C          1.2.643.2.2.35.3  Signature
+  XA         1.2.643.2.2.36.0  Key exchange
+  XB         1.2.643.2.2.36.1  Key exchange
+  test       1.2.643.2.2.35.0  Test purposes
+
+=back
+
+
+
 =head1 NOTES
 
 The use of the genpkey program is encouraged over the algorithm specific
@@ -148,15 +179,15 @@ can be used.
 
 Generate an RSA private key using default parameters:
 
- openssl genpkey -algoritm RSA -out key.pem 
+ openssl genpkey -algorithm RSA -out key.pem 
 
 Encrypt output private key using 128 bit AES and the passphrase "hello":
 
- openssl genpkey -algoritm RSA -out key.pem -aes-128-cbc -pass pass:hello
+ openssl genpkey -algorithm RSA -out key.pem -aes-128-cbc -pass pass:hello
 
 Generate a 2048 bit RSA key using 3 as the public exponent:
 
- openssl genpkey -algoritm RSA -out key.pem -pkeyopt rsa_keygen_bits:2048 \
+ openssl genpkey -algorithm RSA -out key.pem -pkeyopt rsa_keygen_bits:2048 \
  						-pkeyopt rsa_keygen_pubexp:3
 
 Generate 1024 bit DSA parameters:
diff --git a/doc/apps/genrsa.pod b/doc/apps/genrsa.pod
index 25af4d1..7dcac2a 100644
--- a/doc/apps/genrsa.pod
+++ b/doc/apps/genrsa.pod
@@ -57,7 +57,7 @@ all others.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<genrsa>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/openssl.pod b/doc/apps/openssl.pod
index fad9902..2b83c35 100644
--- a/doc/apps/openssl.pod
+++ b/doc/apps/openssl.pod
@@ -81,6 +81,10 @@ Certificate Authority (CA) Management.
 
 Cipher Suite Description Determination.
 
+=item L<B<cms>|cms(1)>
+
+CMS (Cryptographic Message Syntax) utility
+
 =item L<B<crl>|crl(1)>
 
 Certificate Revocation List (CRL) Management.
@@ -98,6 +102,12 @@ Message Digest Calculation.
 Diffie-Hellman Parameter Management.
 Obsoleted by L<B<dhparam>|dhparam(1)>.
 
+=item L<B<dhparam>|dhparam(1)>
+
+Generation and Management of Diffie-Hellman Parameters. Superseded by 
+L<B<genpkey>|genpkey(1)> and L<B<pkeyparam>|pkeyparam(1)>
+
+
 =item L<B<dsa>|dsa(1)>
 
 DSA Data Management.
@@ -107,18 +117,25 @@ DSA Data Management.
 DSA Parameter Generation and Management. Superseded by 
 L<B<genpkey>|genpkey(1)> and L<B<pkeyparam>|pkeyparam(1)>
 
+=item L<B<ec>|ec(1)>
+
+EC (Elliptic curve) key processing
+
+=item L<B<ecparam>|ecparam(1)>
+
+EC parameter manipulation and generation
+
 =item L<B<enc>|enc(1)>
 
 Encoding with Ciphers.
 
-=item L<B<errstr>|errstr(1)>
+=item L<B<engine>|engine(1)>
 
-Error Number to Error String Conversion.
+Engine (loadble module) information and manipulation.
 
-=item L<B<dhparam>|dhparam(1)>
+=item L<B<errstr>|errstr(1)>
 
-Generation and Management of Diffie-Hellman Parameters. Superseded by 
-L<B<genpkey>|genpkey(1)> and L<B<pkeyparam>|pkeyparam(1)>
+Error Number to Error String Conversion.
 
 =item B<gendh>
 
@@ -138,6 +155,10 @@ Generation of Private Key or Parameters.
 
 Generation of RSA Private Key. Superceded by L<B<genpkey>|genpkey(1)>.
 
+=item L<B<nseq>|nseq(1)
+
+Create or examine a netscape certificate sequence
+
 =item L<B<ocsp>|ocsp(1)>
 
 Online Certificate Status Protocol utility.
@@ -158,14 +179,14 @@ PKCS#7 Data Management.
 
 Public and private key management.
 
-=item L<B<pkeyutl>|pkeyutl(1)>
-
-Public key algorithm cryptographic operation utility.
-
 =item L<B<pkeyparam>|pkeyparam(1)>
 
 Public key algorithm parameter management.
 
+=item L<B<pkeyutl>|pkeyutl(1)>
+
+Public key algorithm cryptographic operation utility.
+
 =item L<B<rand>|rand(1)>
 
 Generate pseudo-random bytes.
@@ -178,6 +199,7 @@ PKCS#10 X.509 Certificate Signing Request (CSR) Management.
 
 RSA key management.
 
+
 =item L<B<rsautl>|rsautl(1)>
 
 RSA utility for signing, verification, encryption, and decryption. Superseded
@@ -215,6 +237,10 @@ S/MIME mail processing.
 
 Algorithm Speed Measurement.
 
+=item L<B<spkac>|spkac(1)>
+
+SPKAC printing and generating utility
+
 =item L<B<ts>|ts(1)>
 
 Time Stamping Authority tool (client/server)
diff --git a/doc/apps/pkcs7.pod b/doc/apps/pkcs7.pod
index a0a6363..acfb810 100644
--- a/doc/apps/pkcs7.pod
+++ b/doc/apps/pkcs7.pod
@@ -62,7 +62,7 @@ is B<-print_certs> is set).
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<pkcs7>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/pkcs8.pod b/doc/apps/pkcs8.pod
index 68ecd65..84abee7 100644
--- a/doc/apps/pkcs8.pod
+++ b/doc/apps/pkcs8.pod
@@ -125,7 +125,7 @@ list of possible algorithms is included below.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<pkcs8>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/pkey.pod b/doc/apps/pkey.pod
index 6bd1fc1..4851223 100644
--- a/doc/apps/pkey.pod
+++ b/doc/apps/pkey.pod
@@ -94,7 +94,7 @@ the input is a public key.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<pkey>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/pkeyparam.pod b/doc/apps/pkeyparam.pod
index 453fd02..154f672 100644
--- a/doc/apps/pkeyparam.pod
+++ b/doc/apps/pkeyparam.pod
@@ -43,7 +43,7 @@ do not output the encoded version of the parameters.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<pkeyparam>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/pkeyutl.pod b/doc/apps/pkeyutl.pod
index 74055df..27be9a9 100644
--- a/doc/apps/pkeyutl.pod
+++ b/doc/apps/pkeyutl.pod
@@ -12,6 +12,7 @@ B<openssl> B<pkeyutl>
 [B<-sigfile file>]
 [B<-inkey file>]
 [B<-keyform PEM|DER>]
+[B<-passin arg>]
 [B<-peerkey file>]
 [B<-peerform PEM|DER>]
 [B<-pubin>]
@@ -26,6 +27,7 @@ B<openssl> B<pkeyutl>
 [B<-pkeyopt opt:value>]
 [B<-hexdump>]
 [B<-asn1parse>]
+[B<-engine id>]
 
 =head1 DESCRIPTION
 
@@ -52,7 +54,13 @@ the input key file, by default it should be a private key.
 
 =item B<-keyform PEM|DER>
 
-the key format PEM or DER.
+the key format PEM, DER or ENGINE.
+
+=item B<-passin arg>
+
+the input key password source. For more information about the format of B<arg>
+see the B<PASS PHRASE ARGUMENTS> section in L<openssl(1)|openssl(1)>.
+
 
 =item B<-peerkey file>
 
@@ -60,7 +68,15 @@ the peer key file, used by key derivation (agreement) operations.
 
 =item B<-peerform PEM|DER>
 
-the peer key format PEM or DER.
+the peer key format PEM, DER or ENGINE.
+
+=item B<-engine id>
+
+specifying an engine (by its unique B<id> string) will cause B<pkeyutl>
+to attempt to obtain a functional reference to the specified engine,
+thus initialising it if needed. The engine will then be set as the default
+for all available algorithms.
+
 
 =item B<-pubin>
 
diff --git a/doc/apps/req.pod b/doc/apps/req.pod
index 2ba16b4..ff48bbd 100644
--- a/doc/apps/req.pod
+++ b/doc/apps/req.pod
@@ -22,13 +22,13 @@ B<openssl> B<req>
 [B<-new>]
 [B<-rand file(s)>]
 [B<-newkey rsa:bits>]
-[B<-newkey dsa:file>]
 [B<-newkey alg:file>]
 [B<-nodes>]
 [B<-key filename>]
 [B<-keyform PEM|DER>]
 [B<-keyout filename>]
-[B<-[md5|sha1|md2|mdc2]>]
+[B<-keygen_engine id>]
+[B<-[digest]>]
 [B<-config filename>]
 [B<-subj arg>]
 [B<-multivalue-rdn>]
@@ -36,11 +36,15 @@ B<openssl> B<req>
 [B<-days n>]
 [B<-set_serial n>]
 [B<-asn1-kludge>]
+[B<-no-asn1-kludge>]
 [B<-newhdr>]
 [B<-extensions section>]
 [B<-reqexts section>]
 [B<-utf8>]
 [B<-nameopt>]
+[B<-reqopt>]
+[B<-subject>]
+[B<-subj arg>]
 [B<-batch>]
 [B<-verbose>]
 [B<-engine id>]
@@ -92,6 +96,11 @@ see the B<PASS PHRASE ARGUMENTS> section in L<openssl(1)|openssl(1)>.
 
 prints out the certificate request in text form.
 
+=item B<-subject>
+
+prints out the request subject (or certificate subject if B<-x509> is
+specified)
+
 =item B<-pubkey>
 
 outputs the public key.
@@ -119,6 +128,13 @@ in the configuration file and any requested extensions.
 If the B<-key> option is not used it will generate a new RSA private
 key using information specified in the configuration file.
 
+=item B<-subj arg>
+
+Replaces subject field of input request with specified data and outputs
+modified request. The arg must be formatted as
+I</type0=value0/type1=value1/type2=...>,
+characters may be escaped by \ (backslash), no spaces are skipped.
+
 =item B<-rand file(s)>
 
 a file or files containing random data used to seed the random number
@@ -132,12 +148,26 @@ all others.
 this option creates a new certificate request and a new private
 key. The argument takes one of several forms. B<rsa:nbits>, where
 B<nbits> is the number of bits, generates an RSA key B<nbits>
-in size. B<dsa:filename> generates a DSA key using the parameters
-in the file B<filename>. B<param:file> generates a key using the
-parameter file B<file>, the algorithm is determined by the
-parameters. B<algname:file> use algorithm B<algname> and parameter file
-B<file> the two algorithms must match or an error occurs. B<algname> just
-uses algorithm B<algname>.
+in size. If B<nbits> is omitted, i.e. B<-newkey rsa> specified,
+the default key size, specified in the configuration file is used.
+
+All other algorithms support the B<-newkey alg:file> form, where file may be
+an algorithm parameter file, created by the B<genpkey -genparam> command
+or and X.509 certificate for a key with approriate algorithm.
+
+B<param:file> generates a key using the parameter file or certificate B<file>,
+the algorithm is determined by the parameters. B<algname:file> use algorithm
+B<algname> and parameter file B<file>: the two algorithms must match or an
+error occurs. B<algname> just uses algorithm B<algname>, and parameters,
+if neccessary should be specified via B<-pkeyopt> parameter.
+
+B<dsa:filename> generates a DSA key using the parameters
+in the file B<filename>. B<ec:filename> generates EC key (usable both with
+ECDSA or ECDH algorithms), B<gost2001:filename> generates GOST R
+34.10-2001 key (requires B<ccgost> engine configured in the configuration
+file). If just B<gost2001> is specified a parameter set should be
+specified by B<-pkeyopt paramset:X>
+
 
 =item B<-pkeyopt opt:value>
 
@@ -167,11 +197,15 @@ configuration file is used.
 if this option is specified then if a private key is created it
 will not be encrypted.
 
-=item B<-[md5|sha1|md2|mdc2]>
+=item B<-[digest]>
+
+this specifies the message digest to sign the request with (such as
+B<-md5>, B<-sha1>). This overrides the digest algorithm specified in
+the configuration file.
 
-this specifies the message digest to sign the request with. This
-overrides the digest algorithm specified in the configuration file.
-This option is ignored for DSA requests: they always use SHA1.
+Some public key algorithms may override this choice. For instance, DSA
+signatures always use SHA1, GOST R 34.10 signatures always use
+GOST R 34.11-94 (B<-md_gost94>).
 
 =item B<-config filename>
 
@@ -239,6 +273,15 @@ B<option> argument can be a single option or multiple options separated by
 commas.  Alternatively the B<-nameopt> switch may be used more than once to
 set multiple options. See the L<x509(1)|x509(1)> manual page for details.
 
+=item B<-reqopt>
+
+customise the output format used with B<-text>. The B<option> argument can be
+a single option or multiple options separated by commas. 
+
+See discission of the  B<-certopt> parameter in the L<B<x509>|x509(1)>
+command.
+
+
 =item B<-asn1-kludge>
 
 by default the B<req> command outputs certificate requests containing
@@ -254,6 +297,10 @@ B<SET OF> whereas the correct form does.
 
 It should be noted that very few CAs still require the use of this option.
 
+=item B<-no-asn1-kludge>
+
+Reverses effect of B<-asn1-kludge>
+
 =item B<-newhdr>
 
 Adds the word B<NEW> to the PEM file header and footer lines on the outputed
@@ -269,11 +316,16 @@ print extra details about the operations being performed.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<req>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
 
+=item B<-keygen_engine id>
+
+specifies an engine (by its unique B<id> string) which would be used
+for key generation operations.
+
 =back
 
 =head1 CONFIGURATION FILE FORMAT
diff --git a/doc/apps/rsa.pod b/doc/apps/rsa.pod
index 4d76409..69b2bef 100644
--- a/doc/apps/rsa.pod
+++ b/doc/apps/rsa.pod
@@ -120,7 +120,7 @@ the input is a public key.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<rsa>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/s_client.pod b/doc/apps/s_client.pod
index f99f5ac..f61b80c 100644
--- a/doc/apps/s_client.pod
+++ b/doc/apps/s_client.pod
@@ -101,6 +101,11 @@ also used when building the client certificate chain.
 A file containing trusted certificates to use during server authentication
 and to use when attempting to build the client certificate chain.
 
+=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy>
+
+Set various certificate chain valiadition option. See the
+L<B<verify>|verify(1)> manual page for details.
+
 =item B<-reconnect>
 
 reconnects to the same server 5 times using the same session ID, this can
@@ -219,7 +224,7 @@ connection from this session.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<s_client>
+specifying an engine (by its unique B<id> string) will cause B<s_client>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/s_server.pod b/doc/apps/s_server.pod
index 7f159a3..3e503e1 100644
--- a/doc/apps/s_server.pod
+++ b/doc/apps/s_server.pod
@@ -256,7 +256,7 @@ are part of the HTTP response line and headers must end with CRLF).
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<s_server>
+specifying an engine (by its unique B<id> string) will cause B<s_server>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/smime.pod b/doc/apps/smime.pod
index 6d0234b..97cc0dc 100644
--- a/doc/apps/smime.pod
+++ b/doc/apps/smime.pod
@@ -13,17 +13,7 @@ B<openssl> B<smime>
 [B<-resign>]
 [B<-verify>]
 [B<-pk7out>]
-[B<-des>]
-[B<-des3>]
-[B<-rc2-40>]
-[B<-rc2-64>]
-[B<-rc2-128>]
-[B<-aes128>]
-[B<-aes192>]
-[B<-aes256>]
-[B<-camellia128>]
-[B<-camellia192>]
-[B<-camellia256>]
+[B<-[cipher]>]
 [B<-in file>]
 [B<-certfile file>]
 [B<-signer file>]
@@ -161,13 +151,13 @@ to each certificate.
 digest algorithm to use when signing or resigning. If not present then the
 default digest algorithm for the signing key will be used (usually SHA1).
 
-=item B<-des -des3 -rc2-40 -rc2-64 -rc2-128 -aes128 -aes192 -aes256 -camellia128 -camellia192 -camellia256>
+=item B<-[cipher]>
 
-the encryption algorithm to use. DES (56 bits), triple DES (168 bits), 40, 64
-or 128 bit RC2, 128, 192 or 256 bit AES, or 128, 192 or 256 bit Camellia
-respectively. Any other cipher name (as recognized by the
+the encryption algorithm to use. For example DES  (56 bits) - B<-des>,
+triple DES (168 bits) - B<-des3>,
 EVP_get_cipherbyname() function) can also be used preceded by a dash, for 
-example B<-aes_128_cbc>.
+example B<-aes_128_cbc>. See L<B<enc>|enc(1)> for list of ciphers
+supported by your version of OpenSSL.
 
 If not specified 40 bit RC2 is used. Only used with B<-encrypt>.
 
@@ -269,6 +259,11 @@ portion of a message so they may be included manually. If signing
 then many S/MIME mail clients check the signers certificate's email
 address matches that specified in the From: address.
 
+=item B<-purpose, -ignore_critical, -issuer_checks, -crl_check, -crl_check_all, -policy_check, -extended_crl, -x509_strict, -policy>
+
+Set various options of certificate chain verification. See
+L<B<verify>|verify(1)> manual page for details.
+
 =back
 
 =head1 NOTES
diff --git a/doc/apps/speed.pod b/doc/apps/speed.pod
index 0dcdba8..1cd1998 100644
--- a/doc/apps/speed.pod
+++ b/doc/apps/speed.pod
@@ -44,7 +44,7 @@ This command is used to test the performance of cryptographic algorithms.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<speed>
+specifying an engine (by its unique B<id> string) will cause B<speed>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/spkac.pod b/doc/apps/spkac.pod
index c3f1ff9..97fb80e 100644
--- a/doc/apps/spkac.pod
+++ b/doc/apps/spkac.pod
@@ -81,7 +81,7 @@ verifies the digital signature on the supplied SPKAC.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<spkac>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.
diff --git a/doc/apps/ts.pod b/doc/apps/ts.pod
index aba3b92..7fb6caa 100644
--- a/doc/apps/ts.pod
+++ b/doc/apps/ts.pod
@@ -265,7 +265,7 @@ instead of DER. (Optional)
 
 =item B<-engine> id
 
-Specifying an engine (by it's unique B<id> string) will cause B<ts>
+Specifying an engine (by its unique B<id> string) will cause B<ts>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms. Default is builtin. (Optional)
diff --git a/doc/apps/verify.pod b/doc/apps/verify.pod
index 8c8cbaa..dad3d17 100644
--- a/doc/apps/verify.pod
+++ b/doc/apps/verify.pod
@@ -10,6 +10,18 @@ B<openssl> B<verify>
 [B<-CApath directory>]
 [B<-CAfile file>]
 [B<-purpose purpose>]
+[B<-policy arg>]
+[B<-ignore_critical>]
+[B<-crl_check>]
+[B<-crl_check_all>]
+[B<-policy_check>]
+[B<-explicit_policy>]
+[B<-inhibit_any>]
+[B<-inhibit_map>]
+[B<-x509_strict>]
+[B<-extended_crl>]
+[B<-use_deltas>]
+[B<-policy_print>]
 [B<-untrusted file>]
 [B<-help>]
 [B<-issuer_checks>]
@@ -66,6 +78,63 @@ certificate was rejected. However the presence of rejection messages
 does not itself imply that anything is wrong: during the normal
 verify process several rejections may take place.
 
+=item B<-policy arg>
+
+Enable policy processing and add B<arg> to the user-initial-policy-set
+(see RFC3280 et al). The policy B<arg> can be an object name an OID in numeric
+form. This argument can appear more than once.
+
+=item B<-policy_check>
+
+Enables certificate policy processing.
+
+=item B<-explicit_policy>
+
+Set policy variable require-explicit-policy (see RFC3280 et al).
+
+=item B<-inhibit_any>
+
+Set policy variable inhibit-any-policy (see RFC3280 et al).
+
+=item B<-inhibit_map>
+
+Set policy variable inhibit-policy-mapping (see RFC3280 et al).
+
+=item B<-policy_print>
+
+Print out diagnostics, related to policy checking
+
+=item B<-crl_check>
+
+Checks end entity certificate validity by attempting to lookup a valid CRL.
+If a valid CRL cannot be found an error occurs. 
+
+=item B<-crl_check_all>
+
+Checks the validity of B<all> certificates in the chain by attempting
+to lookup valid CRLs.
+
+=item B<-ignore_critical>
+
+Normally if an unhandled critical extension is present which is not
+supported by OpenSSL the certificate is rejected (as required by
+RFC3280 et al). If this option is set critical extensions are
+ignored.
+
+=item B<-x509_strict>
+
+Disable workarounds for broken certificates which have to be disabled
+for strict X.509 compliance.
+
+=item B<-extended_crl>
+
+Enable extended CRL features such as indirect CRLs and alternate CRL
+signing keys.
+
+=item B<-use_deltas>
+
+Enable support for delta CRLs.
+
 =item B<->
 
 marks the last option. All arguments following this are assumed to be
diff --git a/doc/apps/x509.pod b/doc/apps/x509.pod
index 04d732d..09aaed4 100644
--- a/doc/apps/x509.pod
+++ b/doc/apps/x509.pod
@@ -104,7 +104,7 @@ then this option has no effect: SHA1 is always used with DSA keys.
 
 =item B<-engine id>
 
-specifying an engine (by it's unique B<id> string) will cause B<req>
+specifying an engine (by its unique B<id> string) will cause B<x509>
 to attempt to obtain a functional reference to the specified engine,
 thus initialising it if needed. The engine will then be set as the default
 for all available algorithms.