aboutsummaryrefslogtreecommitdiff
path: root/include/qemu
AgeCommit message (Collapse)AuthorFilesLines
2024-05-03pci: remove some types from typedefs.hPaolo Bonzini1-5/+0
For types that are embedded in structs defined by pci.h, the definition is pretty much required to be available. Remove them from typedefs.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03tcg: remove CPU* types from typedefs.hPaolo Bonzini1-3/+0
hw/core/cpu.h is already using struct forward declarations in some cases to avoid inclusions, and otherwise CPUAddressSpace and CPUJumpCache are only used together with their definition. CPUTLBEntryFull is always used when their definition is available. Remove all three from typedefs.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03display: remove GraphicHwOps from typedefs.hPaolo Bonzini1-1/+0
Basically all uses of GraphicHwOps are defining an instance of it, which requires the full definition of the struct. It is pointless to have it in typedefs.h. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03qapi/machine: remove types from typedefs.hPaolo Bonzini1-2/+0
They are needed in very few places, which already depends on other generated QAPI files. The benefit of having these types in typedefs.h is small. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03monitor: remove MonitorDef from typedefs.hPaolo Bonzini1-1/+0
MonitorDef is defined by hmp-target.h, and all users except one already include it; the reason why the stubs do not include it, is because hmp-target.h currently can only be used in files that are compiled per target. However, that is easily fixed. Because the benefit of having MonitorDef in typedefs.h is very small, do it and remove the type from typedefs.h. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03migration: remove PostcopyDiscardState from typedefs.hPaolo Bonzini1-1/+0
It is defined and referred to exclusively from a .c file. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03lockable: remove QemuLockable from typedefs.hPaolo Bonzini3-5/+4
Using QemuLockable almost always requires going through QEMU_MAKE_LOCKABLE(). Therefore, there is little point in having the typedef always present. Move it to lockable.h, with only a small adjustment to coroutine.h (which has a tricky co-dependency with lockable.h due to defining CoMutex *and* using QemuLockable as a part of the CoQueue API). Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03intc: remove PICCommonState from typedefs.hPaolo Bonzini1-1/+0
Move it to the existing "PIC related things" header, hw/intc/i8259.h. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03qemu-option: remove QemuOpt from typedefs.hPaolo Bonzini2-1/+2
QemuOpt is basically an internal data structure. It has no business being defined except if you need functions from include/qemu/option.h. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03net: remove AnnounceTimer from typedefs.hPaolo Bonzini1-1/+0
Exactly nobody needs it there. Place the typedef in the header that defines the struct. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03numa: remove types from typedefs.hPaolo Bonzini1-2/+0
Exactly nobody needs them there. Place the typedef in the header that defines the struct. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03qdev-core: remove DeviceListener from typedefs.hPaolo Bonzini1-1/+0
It is needed in very few places, which already depend on other parts of qdev-core.h files. The benefit of having it in typedefs.h is small. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03fw_cfg: remove useless declarations from typedefs.hPaolo Bonzini1-3/+0
Only FWCfgState is used as part of APIs such as acpi_ghes_add_fw_cfg. Everything else need not be in typedefs.h. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-05-03bitmap: Use g_try_new0/g_new0/g_renewPaolo Bonzini1-11/+8
Avoids an explicit use of sizeof(). The GLib allocation macros ensure that the multiplication by the size of the element uses the right type and does not overflow. While at it, change bitmap_new() to use g_new0 directly. Its current impl of calling bitmap_try_new() followed by a plain abort() has worse diagnostics than g_new0, which uses g_error to report the actual allocation size that failed. Cc: qemu-trivial@nongnu.org Cc: Roman Kiryanov <rkir@google.com> Reviewed-by: Daniel Berrange <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-30plugins: Merge qemu_plugin_tb_insn_get to plugin-gen.cRichard Henderson1-39/+0
Merge qemu_plugin_insn_alloc and qemu_plugin_tb_insn_get into plugin_gen_insn_start, since it is used nowhere else. Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-04-30plugins: Replace pr_ops with a proper debug dump flagRichard Henderson1-0/+1
The DEBUG_PLUGIN_GEN_OPS ifdef is replaced with "-d op_plugin". The second pr_ops call can be obtained with "-d op". Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-04-30plugins: Introduce PLUGIN_CB_MEM_REGULARRichard Henderson1-0/+1
Use different enumerators for vcpu_udata and vcpu_mem callbacks. Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-04-30plugins: Simplify callback queuesRichard Henderson1-24/+11
We have qemu_plugin_dyn_cb.type to differentiate the various callback types, so we do not need to keep them in separate queues. Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-04-30plugins: Use emit_before_op for PLUGIN_GEN_FROM_INSNRichard Henderson1-1/+0
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-04-30plugins: Create TCGHelperInfo for all out-of-line callbacksRichard Henderson1-0/+1
TCGHelperInfo includes the ABI for every function call. Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-04-30plugins: Move function pointer in qemu_plugin_dyn_cbRichard Henderson1-1/+3
The out-of-line function pointer is mutually exclusive with inline expansion, so move it into the union. Wrap the pointer in a structure named 'regular' to match PLUGIN_CB_REGULAR. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-04-26plugins: Include missing 'qemu/bitmap.h' headerPhilippe Mathieu-Daudé1-0/+1
Since commit c006147122 ("plugins: create CPUPluginState and migrate plugin_mask") "qemu/plugin.h" uses DECLARE_BITMAP(), which is declared in "qemu/bitmap.h". Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20240418192525.97451-19-philmd@linaro.org>
2024-04-26exec: Rename NEED_CPU_H -> COMPILING_PER_TARGETPhilippe Mathieu-Daudé1-1/+1
'NEED_CPU_H' guard target-specific code; it is defined by meson altogether with the 'CONFIG_TARGET' definition. Rename NEED_CPU_H as COMPILING_PER_TARGET to clarify its meaning. Mechanical change running: $ sed -i s/NEED_CPU_H/COMPILING_PER_TARGET/g $(git grep -l NEED_CPU_H) then manually add a /* COMPILING_PER_TARGET */ comment after the '#endif' when the block is large. Inspired-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240322161439.6448-4-philmd@linaro.org>
2024-04-18util/qemu-config: Extract QMP commands to qemu-config-qmp.cPhilippe Mathieu-Daudé1-0/+3
QMP is irrelevant for user emulation. Extract the code related to QMP in a different source file, which won't be build for user emulation binaries. This avoid pulling pointless code. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240404194757.9343-5-philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-ID: <20240408155330.522792-7-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-03-18mirror: Don't call job_pause_point() under graph lockKevin Wolf1-1/+1
Calling job_pause_point() while holding the graph reader lock potentially results in a deadlock: bdrv_graph_wrlock() first drains everything, including the mirror job, which pauses it. The job is only unpaused at the end of the drain section, which is when the graph writer lock has been successfully taken. However, if the job happens to be paused at a pause point where it still holds the reader lock, the writer lock can't be taken as long as the job is still paused. Mark job_pause_point() as GRAPH_UNLOCKED and fix mirror accordingly. Cc: qemu-stable@nongnu.org Buglink: https://issues.redhat.com/browse/RHEL-28125 Fixes: 004915a96a7a ("block: Protect bs->backing with graph_lock") Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20240313153000.33121-1-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2024-03-12Merge tag 'migration-20240311-pull-request' of ↵Peter Maydell1-2/+0
https://gitlab.com/peterx/qemu into staging Migration pull request - Avihai's fix to allow vmstate iterators to not starve for VFIO - Maksim's fix on additional check on precopy load error - Fabiano's fix on fdatasync() hang in mapped-ram - Jonathan's fix on vring cached access over MMIO regions - Cedric's cleanup patches 1-4 out of his error report series - Yu's fix for RDMA migration (which used to be broken even for 8.2) - Anthony's small cleanup/fix on err message - Steve's patches on privatize migration.h - Xiang's patchset to enable zero page detections in multifd threads # -----BEGIN PGP SIGNATURE----- # # iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZe9+uBIccGV0ZXJ4QHJl # ZGhhdC5jb20ACgkQO1/MzfOr1wamaQD/SvmpMEcuRndT9LPSxzXowAGDZTBpYUfv # 5XAbx80dS9IBAO8PJJgQJIBHBeacyLBjHP9CsdVtgw5/VW+wCsbfV4AB # =xavb # -----END PGP SIGNATURE----- # gpg: Signature made Mon 11 Mar 2024 21:59:20 GMT # gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706 # gpg: issuer "peterx@redhat.com" # gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal] # gpg: aka "Peter Xu <peterx@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706 * tag 'migration-20240311-pull-request' of https://gitlab.com/peterx/qemu: (34 commits) migration/multifd: Add new migration test cases for legacy zero page checking. migration/multifd: Enable multifd zero page checking by default. migration/multifd: Implement ram_save_target_page_multifd to handle multifd version of MigrationOps::ram_save_target_page. migration/multifd: Implement zero page transmission on the multifd thread. migration/multifd: Add new migration option zero-page-detection. migration/multifd: Allow clearing of the file_bmap from multifd migration/multifd: Allow zero pages in file migration migration: purge MigrationState from public interface migration: delete unused accessors migration: privatize colo interfaces migration: migration_file_set_error migration: migration_is_device migration: migration_thread_is_self migration: export vcpu_dirty_limit_period migration: export migration_is_running migration: export migration_is_active migration: export migration_is_setup_or_active migration: remove migration.h references migration: export fewer options migration: Fix format in error message ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-11migration: Remove SaveStateHandler and LoadStateHandler typedefsCédric Le Goater1-2/+0
They are only used once. Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/r/20240304122844.1888308-8-clg@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11docs: update copyright date to the year 2024Ani Sinha1-1/+1
We are already in the third month of 2024 but the copyright notices still refer to 2023. Update the date to 2024 in documentation and help texts. Cc: peter.maydell@linaro.org Cc: qemu-trivial@nongnu.org Signed-off-by: Ani Sinha <anisinha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240311120346.9596-1-anisinha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-06plugins: remove non per_vcpu inline operation from APIPierrick Bouvier1-53/+5
Now we have a thread-safe equivalent of inline operation, and that all plugins were changed to use it, there is no point to keep the old API. In more, it will help when we implement more functionality (conditional callbacks), as we can assume that we operate on a scoreboard. API version bump was already done as part of this series. Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20240304130036.124418-12-pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240305121005.3528075-25-alex.bennee@linaro.org>
2024-03-06plugins: add inline operation per vcpuPierrick Bouvier2-1/+51
Extends API with three new functions: qemu_plugin_register_vcpu_{tb, insn, mem}_exec_inline_per_vcpu(). Those functions takes a qemu_plugin_u64 as input. This allows to have a thread-safe and type-safe version of inline operations. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20240304130036.124418-5-pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240305121005.3528075-18-alex.bennee@linaro.org>
2024-03-06plugins: define qemu_plugin_u64Pierrick Bouvier1-0/+52
Additionally to the scoreboard, we define a qemu_plugin_u64, which is a simple struct holding a pointer to a scoreboard, and a given offset. This allows to have a scoreboard containing structs, without having to bring offset to operate on a specific field. Since most of the plugins are simply collecting a sum of per-cpu values, qemu_plugin_u64 directly support this operation as well. All inline operations defined later will use a qemu_plugin_u64 as input. New functions: - qemu_plugin_u64_add - qemu_plugin_u64_get - qemu_plugin_u64_set - qemu_plugin_u64_sum New macros: - qemu_plugin_scoreboard_u64 - qemu_plugin_scoreboard_u64_in_struct Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20240304130036.124418-3-pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240305121005.3528075-16-alex.bennee@linaro.org>
2024-03-06plugins: scoreboard APIPierrick Bouvier2-0/+37
We introduce a cpu local storage, automatically managed (and extended) by QEMU itself. Plugin allocate a scoreboard, and don't have to deal with how many cpus are launched. This API will be used by new inline functions but callbacks can benefit from this as well. This way, they can operate without a global lock for simple operations. At any point during execution, any scoreboard will be dimensioned with at least qemu_plugin_num_vcpus entries. New functions: - qemu_plugin_scoreboard_find - qemu_plugin_scoreboard_free - qemu_plugin_scoreboard_new Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20240304130036.124418-2-pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240305121005.3528075-15-alex.bennee@linaro.org>
2024-03-05Merge tag 'pull-target-arm-20240305' of ↵Peter Maydell1-1/+1
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * raspi: Implement Broadcom Serial Controller (BSC) for BCM2835 boards * hw/char/pl011: Add support for loopback * STM32L4x5: Implement RCC clock control device * target/arm: Do memory type alignment checks * atomic.h: Reword confusing comment for qatomic_cmpxchg * qemu-options.hx: Don't claim "-serial" has limit of 4 serial ports # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmXnI4gZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3p5ED/wOtAHA3PK+WbQhVhnji3+k # gdhvVcldf+HLaI2v4tfaW152xjY80/j3PQFNkzptoXENA9U51F47oNYOIfULLZZX # FTKmw/mjTBc2LqJ8gLpS8Wkr/PFtDq9JJzDwZd0MwguXpzIJp31JJpESvXlAqjjv # FhuAcqNNuGwI2SXCBmp2lPoEMn8ExLDoG9rmzjxVZeZCyzUjVnJYM61ykhC4ByvK # j5+/a7pUcpgHSX5cbq7kFloPOx3JXI5lS6xUKhGXXk75qHRwiQIsxMcPq8PD1+ok # yrmp7cySwK8I7AlIPdDjpJmhU0OiBu+PkYiXmHlF2nvaUy6M0nVX2lSTzqj6VpVV # 7yYhvWXHrtIA9AUspqTRsX7tP7iMJkco7qWfKSzYl+3pTbxS4+rEoee4jNR3hqsU # lbWC47sNVtTN507qIL1dcsu+BaeSsYVftfxtFql3odTqRB+ticsjDfKg69dRSFyk # SS0t8Zy3TdomcEoQkAv/ZSpkQnQUGavbRumCG58lJdiTwTuJUmGi1ufKBrD/GeKj # IlDEl9yvKiR8uvdjj6EQqr5kOj09mmN5nvokNsq5a4aNXBYoesszWK2xodzXE2x5 # M9DHJ3S8xnN++p1idS2bikwEklG1XVQ/q52bDXQkUmQSNerVS1PCvg9hzYqA+x53 # ihJtMcsmGVfxY8aQHyHweA== # =isAe # -----END PGP SIGNATURE----- # gpg: Signature made Tue 05 Mar 2024 13:52:08 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20240305' of https://git.linaro.org/people/pmaydell/qemu-arm: qemu-options.hx: Don't claim "-serial" has limit of 4 serial ports atomic.h: Reword confusing comment for qatomic_cmpxchg target/arm: Do memory type alignment check when translation enabled target/arm: Do memory type alignment check when translation disabled accel/tcg: Add TLB_CHECK_ALIGNED accel/tcg: Add tlb_fill_flags to CPUTLBEntryFull exec/memattrs: Remove target_tlb_bit* target/arm: Support 32-byte alignment in pow2_align tests/qtest/stm32l4x5_rcc-test.c: Add tests for the STM32L4x5_RCC hw/arm/stm32l4x5_soc.c: Use the RCC Sysclk hw/misc/stm32l4x5_rcc: Add write protections to CR register hw/misc/stm32l4x5_rcc: Handle Register Updates hw/misc/stm32l4x5_rcc: Initialize PLLs and clock multiplexers hw/misc/stm32l4x5_rcc: Add an internal PLL Clock object hw/misc/stm32l4x5_rcc: Add an internal clock multiplexer object hw/misc/stm32l4x5_rcc: Implement STM32L4x5_RCC skeleton hw/char/pl011: Add support for loopback tests/qtest: Add testcase for BCM2835 BSC hw/arm: Connect BSC to BCM2835 board as I2C0, I2C1 and I2C2 hw/i2c: Implement Broadcom Serial Controller (BSC) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05atomic.h: Reword confusing comment for qatomic_cmpxchgPeter Maydell1-1/+1
The qatomic_cmpxchg() and qatomic_cmpxchg__nocheck() macros have a comment that reads: Returns the eventual value, failed or not This is somewhere between cryptic and wrong, since the value actually returned is the value that was in memory before the cmpxchg. Reword to match how we describe these macros in atomics.rst. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Message-id: 20240223182035.1048541-1-peter.maydell@linaro.org
2024-03-01migration/multifd: Support outgoing mapped-ram stream formatFabiano Rosas1-0/+13
The new mapped-ram stream format uses a file transport and puts ram pages in the migration file at their respective offsets and can be done in parallel by using the pwritev system call which takes iovecs and an offset. Add support to enabling the new format along with multifd to make use of the threading and page handling already in place. This requires multifd to stop sending headers and leaving the stream format to the mapped-ram code. When it comes time to write the data, we need to call a version of qio_channel_write that can take an offset. Usage on HMP is: (qemu) stop (qemu) migrate_set_capability multifd on (qemu) migrate_set_capability mapped-ram on (qemu) migrate_set_parameter max-bandwidth 0 (qemu) migrate_set_parameter multifd-channels 8 (qemu) migrate file:migfile Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Link: https://lore.kernel.org/r/20240229153017.2221-21-farosas@suse.de Signed-off-by: Peter Xu <peterx@redhat.com>
2024-02-28Merge tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu ↵Peter Maydell1-2/+6
into staging Migration pull request - Fabiano's fixed-ram patches (1-5 only) - Peter's cleanups on multifd tls IOC referencing - Steve's cpr patches for vfio (migration patches only) - Fabiano's fix on mbps stats racing with COMPLETE state - Fabiano's fix on return path thread hang # -----BEGIN PGP SIGNATURE----- # # iIcEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZd7AbhIccGV0ZXJ4QHJl # ZGhhdC5jb20ACgkQO1/MzfOr1wbg0gDyA3Vg3pIqCJ+u+hLZ+QKxY/pnu8Y5kF+E # HK2IdslQUQD+OX4ATUnl+CGMiVX9fjs1fKx0Z0Qetq8gC1YJF13yuA0= # =P2QF # -----END PGP SIGNATURE----- # gpg: Signature made Wed 28 Feb 2024 05:11:10 GMT # gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706 # gpg: issuer "peterx@redhat.com" # gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal] # gpg: aka "Peter Xu <peterx@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706 * tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu: (25 commits) migration: Use migrate_has_error() in close_return_path_on_source() migration: Join the return path thread before releasing to_dst_file migration: Fix qmp_query_migrate mbps value migration: options incompatible with cpr migration: update cpr-reboot description migration: stop vm for cpr migration: notifier error checking migration: refactor migrate_fd_connect failures migration: per-mode notifiers migration: MigrationNotifyFunc migration: remove postcopy_after_devices migration: MigrationEvent for notifiers migration: convert to NotifierWithReturn migration: remove error from notifier data notify: pass error to notifier with return migration/multifd: Drop unnecessary helper to destroy IOC migration/multifd: Cleanup outgoing_args in state destroy migration/multifd: Make multifd_channel_connect() return void migration/multifd: Drop registered_yank migration/multifd: Cleanup TLS iochannel referencing ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-28plugins: add an API to read registersAlex Bennée1-2/+48
We can only request a list of registers once the vCPU has been initialised so the user needs to use either call the get function on vCPU initialisation or during the translation phase. We don't expose the reg number to the plugin instead hiding it behind an opaque handle. For now this is just the gdb_regnum encapsulated in an anonymous GPOINTER but in future as we add more state for plugins to track we can expand it. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1706 Based-on: <20231025093128.33116-18-akihiko.odaki@daynix.com> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240227144335.1196131-24-alex.bennee@linaro.org>
2024-02-28plugins: create CPUPluginState and migrate plugin_maskAlex Bennée2-0/+14
As we expand the per-vCPU data for plugins we don't want to pollute CPUState. For now this just moves the plugin_mask (renamed to event_mask) as the memory callbacks are accessed directly by TCG generated code. Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240227144335.1196131-23-alex.bennee@linaro.org>
2024-02-28plugins: Use different helpers when reading registersAkihiko Odaki1-0/+1
This avoids optimizations incompatible when reading registers. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Message-Id: <20231213-gdb-v17-12-777047380591@daynix.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240227144335.1196131-21-alex.bennee@linaro.org>
2024-02-28plugins: add qemu_plugin_num_vcpus functionPierrick Bouvier1-0/+3
We now keep track of how many vcpus were started. This way, a plugin can easily query number of any vcpus at any point of execution, which unifies user and system mode workflows. Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240213094009.150349-3-pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240227144335.1196131-17-alex.bennee@linaro.org>
2024-02-28plugins: remove previous n_vcpus functions from APIPierrick Bouvier1-7/+3
This information is already accessible using qemu_info_t during plugin install. We will introduce another function (qemu_plugin_num_vcpus) which represent how many cpus were enabled, by tracking new cpu indexes. It's a breaking change, so we bump API version. Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240213094009.150349-2-pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240227144335.1196131-16-alex.bennee@linaro.org>
2024-02-28migration: convert to NotifierWithReturnSteve Sistare1-0/+1
Change all migration notifiers to type NotifierWithReturn, so notifiers can return an error status in a future patch. For now, pass NULL for the notifier error parameter, and do not check the return value. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/1708622920-68779-4-git-send-email-steven.sistare@oracle.com [peterx: dropped unexpected update to roms/seabios-hppa] Signed-off-by: Peter Xu <peterx@redhat.com>
2024-02-28notify: pass error to notifier with returnSteve Sistare1-2/+5
Pass an error object as the third parameter to "notifier with return" notifiers, so clients no longer need to bundle an error object in the opaque data. The new parameter is used in a later patch. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/1708622920-68779-2-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-02-14chardev/parallel: Don't close stdin on inappropriate deviceMarkus Armbruster1-1/+8
The __linux__ version of qemu_chr_open_pp_fd() tries to claim the parport device with a PPCLAIM ioctl(). On success, it stores the file descriptor in the chardev object, and returns success. On failure, it closes the file descriptor, and returns failure. chardev_new() then passes the Chardev to object_unref(). This duly calls char_parallel_finalize(), which closes the file descriptor stored in the chardev object. Since qemu_chr_open_pp_fd() didn't store it, it's still zero, so this closes standard input. Ooopsie. To demonstate, add a unit test. With the bug above unfixed, running this test closes standard input. char_hotswap_test() happens to run next. It opens a socket, duly gets file descriptor 0, and since it tests for success with > 0 instead of >= 0, it fails. The new unit test needs to be conditional exactly like the chardev it tests. Since the condition is rather complicated, steal the solution from the serial chardev: define HAVE_CHARDEV_PARALLEL in qemu/osdep.h. This also permits simplifying chardev/meson.build a bit. The bug fix is easy enough: store the file descriptor, and leave closing it to char_parallel_finalize(). The next commit will fix char_hotswap_test()'s test for success. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240203080228.2766159-2-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Test fixed up for BSDs, indentation fixed up, commit message improved]
2024-02-06oslib-posix: initialize backend memory objects in parallelMark Kanda1-1/+17
QEMU initializes preallocated backend memory as the objects are parsed from the command line. This is not optimal in some cases (e.g. memory spanning multiple NUMA nodes) because the memory objects are initialized in series. Allow the initialization to occur in parallel (asynchronously). In order to ensure optimal thread placement, asynchronous initialization requires prealloc context threads to be in use. Signed-off-by: Mark Kanda <mark.kanda@oracle.com> Message-ID: <20240131165327.3154970-2-mark.kanda@oracle.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2024-01-31Merge tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu into stagingPeter Maydell1-1/+0
trivial patches for 2024-01-31 # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmW6NScPHG1qdEB0bHMu # bXNrLnJ1AAoJEHAbT2saaT5ZdQYH/2fhfhZotH0V2qAcMxlOoHbAE9UhZNRsSYtf # QFP0GXFYFAMm7LHkPUbvKgO7LylKWAOMn/zKZqgj1Vf1EpoKQ2FwLtR/buDz86Ec # pi2OrDPRA7Ay5c3ow3YZZkUOhQTTcR5rNjYctPtt/J4j8ol/z5vre7weJIg2bCJe # zI7vIVg7iFFzbkXY20KHngJ5nDC+aEm7WaGlxAP8kfkvy324Wy9O2k8qu2J5zbLT # HGvh3rwEDvRTYe4CaKFFHWNV0m4092HAr/dJBobugI5VZ6QQpK6Tgy8N+4ZrCHD2 # SjUKeym85VTOYGuY8b18fk5MQK2SzsfBUJ4x8VGC75W4mJ8agdc= # =HImO # -----END PGP SIGNATURE----- # gpg: Signature made Wed 31 Jan 2024 11:55:19 GMT # gpg: using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59 # gpg: issuer "mjt@tls.msk.ru" # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full] # gpg: aka "Michael Tokarev <mjt@corpit.ru>" [full] # gpg: aka "Michael Tokarev <mjt@debian.org>" [full] # Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5 # Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59 * tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu: (21 commits) hw/hyperv: Include missing headers hw/intc/xics: Include missing 'cpu.h' header hw/arm: Add `\n` to hint message hw/loongarch: Add `\n` to hint message hw/i386: Add `\n` to hint message backends/hostmem: Fix block comments style (checkpatch.pl warnings) misc: Clean up includes riscv: Clean up includes cxl: Clean up includes include: Clean up includes m68k: Clean up includes acpi: Clean up includes aspeed: Clean up includes disas/riscv: Clean up includes hyperv: Clean up includes scripts/clean-includes: Update exclude list mailmap: Fix Stefan Weil email qemu-docs: Update options for graphical frontends qapi/migration.json: Fix the member name for MigrationCapability colo: examples: remove mentions of script= and (wrong) downscript= ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-30include: Clean up includesPeter Maydell1-1/+0
This commit was created with scripts/clean-includes: ./scripts/clean-includes --git include include/*/*.h include/*/*/*.h All .c should include qemu/osdep.h first. The script performs three related cleanups: * Ensure .c files include qemu/osdep.h first. * Including it in a .h is redundant, since the .c already includes it. Drop such inclusions. * Likewise, including headers qemu/osdep.h includes is redundant. Drop these, too. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-01-29include/qemu: Add TCGCPUOps typedef to typedefs.hRichard Henderson1-0/+1
QEMU coding style recommends using structure typedefs. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-01-26Merge tag 'pull-target-arm-20240126' of ↵Peter Maydell1-8/+8
https://git.linaro.org/people/pmaydell/qemu-arm into staging target-arm queue: * Fix VNCR fault detection logic * Fix A64 scalar SQSHRN and SQRSHRN * Fix incorrect aa64_tidcp1 feature check * hw/arm/virt.c: Remove newline from error_report() string * hw/arm/musicpal: Convert to qemu_add_kbd_event_handler() * hw/arm/allwinner-a10: Unconditionally map the USB Host controllers * hw/arm/nseries: Unconditionally map the TUSB6010 USB Host controller * hw/arm: Add EHCI/OHCI controllers to Allwinner R40 and Bananapi board * hw/arm: Add AHCI/SATA controller to Allwinner R40 and Bananapi board * hw/arm: Add watchdog timer to Allwinner H40 and Bananapi board * arm: various include header cleanups * cleanups to allow some files to be built only once * fsl-imx6ul: Add various missing unimplemented devices * docs/system/arm/virt.rst: Add note on CPU features off by default * hw/char/imx_serial: Implement receive FIFO and ageing timer * target/xtensa: fix OOB TLB entry access * bswap.h: Fix const_le64() macro * hw/arm: add PCIe to Freescale i.MX6 # -----BEGIN PGP SIGNATURE----- # # iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmWzwpsZHHBldGVyLm1h # eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3oTVD/4jM7ttKlXxtWsJ/cKDL5Im # uMmDECPrdK2qaNpONfV/YC3WadM6bSgB8OQd2YlI67DLgl3Hfaa+GnQsZhEgZ3lC # VECOTg5OKwwJY+Ac86t1GJa483wDEQ6NL08oLN94n9Ub/9G0S3oWpmE4bgof7PzW # rbLDDpKP+W5NfkqMfA5piV7N6mFHvg9wqFX//quqySIiu8NesKV9LmlP/FyNDU/s # 8ZeSqo/tq/IHr9IeYUtOoxVwYUOPuNKwD+vwy1taiXgjvVtq2URrCrlc4+KCWJsj # VUBSXdY2boqK31KFZ9NP9kJhIS5gmzgnK8YrHX6sgSbh+IybZUv+y/4eSO/LDYIi # r2VQF6oTtkmcIxUqAI6ZAehzZUIrB22QItUN8rg0slKBM8e/xHYaEBY8APKCLcvE # h59DLq1rPZG3Aie/h3/RjTfT2kI83PiE1mDGbhKf9G8UfXHEH8Eabd0g66UWfzlK # 67o7bwwzwXgoGk2hgMY/yobB3pF5YCly/a3aN/aLEj387y8sNaT1ASR9LETj7TC3 # xOhn5f8G6OFKMVI3K8Sco8ILP15LELprAW2keL4jn+4y3Hfq5yC984yOSnlM0wug # wWRvEr7U1ZiEbDaOvoa0beuYpeq1sm4OZ5yGJxGy3IuQ8pZpkHVTrBxw/NCNQnos # fK5czVTGqvvmPXgPsQQm1A== # =vYTy # -----END PGP SIGNATURE----- # gpg: Signature made Fri 26 Jan 2024 14:32:59 GMT # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * tag 'pull-target-arm-20240126' of https://git.linaro.org/people/pmaydell/qemu-arm: (36 commits) hw/arm: add PCIe to Freescale i.MX6 target/arm: Fix incorrect aa64_tidcp1 feature check bswap.h: Fix const_le64() macro target/arm: Fix A64 scalar SQSHRN and SQRSHRN hw/char/imx_serial: Implement receive FIFO and ageing timer docs/system/arm/virt.rst: Add note on CPU features off by default fsl-imx6ul: Add various missing unimplemented devices hw/arm: Build various units only once target/arm: Move GTimer definitions to new 'gtimer.h' header target/arm: Move e2h_access() helper around target/arm: Move ARM_CPU_IRQ/FIQ definitions to 'cpu-qom.h' header hw/arm/armv7m: Make 'hw/intc/armv7m_nvic.h' a target agnostic header target/arm: Expose M-profile register bank index definitions hw/misc/xlnx-versal-crl: Build it only once hw/misc/xlnx-versal-crl: Include generic 'cpu-qom.h' instead of 'cpu.h' hw/cpu/a9mpcore: Build it only once target/arm: Declare ARM_CPU_TYPE_NAME/SUFFIX in 'cpu-qom.h' target/arm: Expose arm_cpu_mp_affinity() in 'multiprocessing.h' header target/arm: Create arm_cpu_mp_affinity target/arm: Rename arm_cpu_mp_affinity ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-01-26bswap.h: Fix const_le64() macroPeter Maydell1-8/+8
The const_le64() macro introduced in commit 845d80a8c7b187 turns out to have a bug which means that on big-endian systems the compiler complains if the argument isn't already a 64-bit type. This hasn't caused a problem yet, because there are no in-tree uses, but it means it's not possible for anybody to add one without it failing CI. This example is from an attempted use of it with the argument '0', from the s390 CI runner's gcc: ../block/blklogwrites.c: In function ‘blk_log_writes_co_do_log’: ../include/qemu/bswap.h:148:36: error: left shift count >= width of type [-Werror=shift-count-overflow] 148 | ((((_x) & 0x00000000000000ffU) << 56) | \ | ^~ ../block/blklogwrites.c:409:27: note: in expansion of macro ‘const_le64’ 409 | .nr_entries = const_le64(0), | ^~~~~~~~~~ ../include/qemu/bswap.h:149:36: error: left shift count >= width of type [-Werror=shift-count-overflow] 149 | (((_x) & 0x000000000000ff00U) << 40) | \ | ^~ ../block/blklogwrites.c:409:27: note: in expansion of macro ‘const_le64’ 409 | .nr_entries = const_le64(0), | ^~~~~~~~~~ cc1: all warnings being treated as errors Fix this by making all the constants in the macro have the ULL suffix. This will cause them all to be 64-bit integers, which means the result of the logical & will also be an unsigned 64-bit type, even if the input to the macro is a smaller type, and so the shifts will be in range. Fixes: 845d80a8c7b187 ("qemu/bswap: Add const_le64()") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Message-id: 20240122173735.472951-1-peter.maydell@linaro.org
generated by cgit v1.1 at 2025-09-18 23:28:16 +0000