This commit was manufactured by cvs2svn to create branch 'add-fakeroots-github/add-fakeroots-diradd-fakeroots-dir

dir'.

Sprout from kettenis_i386newframe-20030419-branch 2003-04-19 00:19:41 UTC cvs2svn 'This commit was manufactured by cvs2svn to create branch'
Delete:
    Makefile.tpl
    README
    README-maintainer-mode
    config-ml.in
    config.guess
    config.if
    config.sub
    config/ChangeLog
    config/accross.m4
    config/acinclude.m4
    config/acx.m4
    config/mh-armpic
    config/mh-cxux
    config/mh-cygwin
    config/mh-decstation
    config/mh-dgux386
    config/mh-djgpp
    config/mh-elfalphapic
    config/mh-i370pic
    config/mh-ia64pic
    config/mh-interix
    config/mh-lynxrs6k
    config/mh-m68kpic
    config/mh-mingw32
    config/mh-ncr3000
    config/mh-necv4
    config/mh-papic
    config/mh-ppcpic
    config/mh-s390pic
    config/mh-sco
    config/mh-solaris
    config/mh-sparcpic
    config/mh-sysv4
    config/mh-sysv5
    config/mh-x86pic
    config/mt-alphaieee
    config/mt-d30v
    config/mt-linux
    config/mt-netware
    config/mt-ospace
    config/mt-v810
    config/mt-wince
    configure
    configure.in
    djunpack.bat
    etc/ChangeLog
    etc/Makefile.in
    etc/add-log.el
    etc/add-log.vi
    etc/configbuild.ein
    etc/configbuild.fig
    etc/configbuild.jin
    etc/configbuild.tin
    etc/configdev.ein
    etc/configdev.fig
    etc/configdev.jin
    etc/configdev.tin
    etc/configure
    etc/configure.in
    etc/configure.texi
    etc/fdl.texi
    etc/make-stds.texi
    etc/standards.texi
    etc/texi2pod.pl
    gettext.m4
    include/COPYING
    include/ChangeLog
    include/MAINTAINERS
    include/alloca-conf.h
    include/ansidecl.h
    include/aout/ChangeLog
    include/aout/adobe.h
    include/aout/aout64.h
    include/aout/ar.h
    include/aout/dynix3.h
    include/aout/encap.h
    include/aout/host.h
    include/aout/hp.h
    include/aout/hp300hpux.h
    include/aout/hppa.h
    include/aout/ranlib.h
    include/aout/reloc.h
    include/aout/stab.def
    include/aout/stab_gnu.h
    include/aout/sun4.h
    include/bfdlink.h
    include/bin-bugs.h
    include/bout.h
    include/coff/ChangeLog
    include/coff/a29k.h
    include/coff/alpha.h
    include/coff/apollo.h
    include/coff/arm.h
    include/coff/aux-coff.h
    include/coff/ecoff.h
    include/coff/external.h
    include/coff/go32exe.h
    include/coff/h8300.h
    include/coff/h8500.h
    include/coff/i386.h
    include/coff/i860.h
    include/coff/i960.h
    include/coff/ia64.h
    include/coff/internal.h
    include/coff/m68k.h
    include/coff/m88k.h
    include/coff/mcore.h
    include/coff/mips.h
    include/coff/mipspe.h
    include/coff/or32.h
    include/coff/pe.h
    include/coff/powerpc.h
    include/coff/rs6000.h
    include/coff/rs6k64.h
    include/coff/sh.h
    include/coff/sparc.h
    include/coff/sym.h
    include/coff/symconst.h
    include/coff/ti.h
    include/coff/tic30.h
    include/coff/tic4x.h
    include/coff/tic54x.h
    include/coff/tic80.h
    include/coff/w65.h
    include/coff/we32k.h
    include/coff/xcoff.h
    include/coff/z8k.h
    include/demangle.h
    include/dis-asm.h
    include/dyn-string.h
    include/elf/ChangeLog
    include/elf/alpha.h
    include/elf/arc.h
    include/elf/arm.h
    include/elf/avr.h
    include/elf/common.h
    include/elf/cris.h
    include/elf/d10v.h
    include/elf/d30v.h
    include/elf/dlx.h
    include/elf/dwarf.h
    include/elf/dwarf2.h
    include/elf/external.h
    include/elf/fr30.h
    include/elf/frv.h
    include/elf/h8.h
    include/elf/hppa.h
    include/elf/i370.h
    include/elf/i386.h
    include/elf/i860.h
    include/elf/i960.h
    include/elf/ia64.h
    include/elf/internal.h
    include/elf/ip2k.h
    include/elf/iq2000.h
    include/elf/m32r.h
    include/elf/m68hc11.h
    include/elf/m68k.h
    include/elf/mcore.h
    include/elf/mips.h
    include/elf/mmix.h
    include/elf/mn10200.h
    include/elf/mn10300.h
    include/elf/msp430.h
    include/elf/openrisc.h
    include/elf/or32.h
    include/elf/pj.h
    include/elf/ppc.h
    include/elf/ppc64.h
    include/elf/reloc-macros.h
    include/elf/s390.h
    include/elf/sh.h
    include/elf/sparc.h
    include/elf/v850.h
    include/elf/vax.h
    include/elf/x86-64.h
    include/elf/xstormy16.h
    include/elf/xtensa.h
    include/fibheap.h
    include/filenames.h
    include/floatformat.h
    include/fnmatch.h
    include/fopen-bin.h
    include/fopen-same.h
    include/fopen-vms.h
    include/gdb/ChangeLog
    include/gdb/callback.h
    include/gdb/remote-sim.h
    include/gdb/signals.h
    include/gdb/sim-arm.h
    include/gdb/sim-d10v.h
    include/gdb/sim-h8300.h
    include/gdb/sim-sh.h
    include/gdbm.h
    include/getopt.h
    include/hashtab.h
    include/hp-symtab.h
    include/ieee.h
    include/libiberty.h
    include/md5.h
    include/mpw/ChangeLog
    include/mpw/README
    include/mpw/dir.h
    include/mpw/dirent.h
    include/mpw/fcntl.h
    include/mpw/grp.h
    include/mpw/mpw.h
    include/mpw/pwd.h
    include/mpw/spin.h
    include/mpw/stat.h
    include/mpw/sys/file.h
    include/mpw/sys/param.h
    include/mpw/sys/resource.h
    include/mpw/sys/stat.h
    include/mpw/sys/time.h
    include/mpw/sys/types.h
    include/mpw/utime.h
    include/mpw/varargs.h
    include/nlm/ChangeLog
    include/nlm/alpha-ext.h
    include/nlm/common.h
    include/nlm/external.h
    include/nlm/i386-ext.h
    include/nlm/internal.h
    include/nlm/ppc-ext.h
    include/nlm/sparc32-ext.h
    include/oasys.h
    include/objalloc.h
    include/obstack.h
    include/opcode/ChangeLog
    include/opcode/a29k.h
    include/opcode/alpha.h
    include/opcode/arc.h
    include/opcode/arm.h
    include/opcode/avr.h
    include/opcode/cgen.h
    include/opcode/convex.h
    include/opcode/cris.h
    include/opcode/d10v.h
    include/opcode/d30v.h
    include/opcode/dlx.h
    include/opcode/h8300.h
    include/opcode/hppa.h
    include/opcode/i370.h
    include/opcode/i386.h
    include/opcode/i860.h
    include/opcode/i960.h
    include/opcode/ia64.h
    include/opcode/m68hc11.h
    include/opcode/m68k.h
    include/opcode/m88k.h
    include/opcode/mips.h
    include/opcode/mmix.h
    include/opcode/mn10200.h
    include/opcode/mn10300.h
    include/opcode/msp430.h
    include/opcode/np1.h
    include/opcode/ns32k.h
    include/opcode/or32.h
    include/opcode/pdp11.h
    include/opcode/pj.h
    include/opcode/pn.h
    include/opcode/ppc.h
    include/opcode/pyr.h
    include/opcode/s390.h
    include/opcode/sparc.h
    include/opcode/tahoe.h
    include/opcode/tic30.h
    include/opcode/tic4x.h
    include/opcode/tic54x.h
    include/opcode/tic80.h
    include/opcode/v850.h
    include/opcode/vax.h
    include/os9k.h
    include/partition.h
    include/progress.h
    include/safe-ctype.h
    include/sort.h
    include/splay-tree.h
    include/symcat.h
    include/ternary.h
    include/xregex.h
    include/xregex2.h
    include/xtensa-config.h
    include/xtensa-isa-internal.h
    include/xtensa-isa.h
    install-sh
    libtool.m4
    ltcf-c.sh
    ltcf-cxx.sh
    ltcf-gcj.sh
    ltconfig
    ltmain.sh
    makefile.vms
    missing
    mkdep
    mkinstalldirs
    move-if-change
    mpw-README
    mpw-build.in
    mpw-config.in
    mpw-configure
    mpw-install
    setup.com
    src-release
    symlink-tree
    texinfo/texinfo.tex
    ylwrap

1 files changed, 0 insertions, 303 deletions

diff --git a/include/opcode/ppc.h b/include/opcode/ppc.h
deleted file mode 100644
index ffd313a..0000000
--- a/include/opcode/ppc.h
+++ /dev/null
@@ -1,303 +0,0 @@
-/* ppc.h -- Header file for PowerPC opcode table
-   Copyright 1994, 1995, 1999, 2000, 2001, 2002
-   Free Software Foundation, Inc.
-   Written by Ian Lance Taylor, Cygnus Support
-
-This file is part of GDB, GAS, and the GNU binutils.
-
-GDB, GAS, and the GNU binutils are free software; you can redistribute
-them and/or modify them under the terms of the GNU General Public
-License as published by the Free Software Foundation; either version
-1, or (at your option) any later version.
-
-GDB, GAS, and the GNU binutils are distributed in the hope that they
-will be useful, but WITHOUT ANY WARRANTY; without even the implied
-warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this file; see the file COPYING.  If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef PPC_H
-#define PPC_H
-
-/* The opcode table is an array of struct powerpc_opcode.  */
-
-struct powerpc_opcode
-{
-  /* The opcode name.  */
-  const char *name;
-
-  /* The opcode itself.  Those bits which will be filled in with
-     operands are zeroes.  */
-  unsigned long opcode;
-
-  /* The opcode mask.  This is used by the disassembler.  This is a
-     mask containing ones indicating those bits which must match the
-     opcode field, and zeroes indicating those bits which need not
-     match (and are presumably filled in by operands).  */
-  unsigned long mask;
-
-  /* One bit flags for the opcode.  These are used to indicate which
-     specific processors support the instructions.  The defined values
-     are listed below.  */
-  unsigned long flags;
-
-  /* An array of operand codes.  Each code is an index into the
-     operand table.  They appear in the order which the operands must
-     appear in assembly code, and are terminated by a zero.  */
-  unsigned char operands[8];
-};
-
-/* The table itself is sorted by major opcode number, and is otherwise
-   in the order in which the disassembler should consider
-   instructions.  */
-extern const struct powerpc_opcode powerpc_opcodes[];
-extern const int powerpc_num_opcodes;
-
-/* Values defined for the flags field of a struct powerpc_opcode.  */
-
-/* Opcode is defined for the PowerPC architecture.  */
-#define PPC_OPCODE_PPC (01)
-
-/* Opcode is defined for the POWER (RS/6000) architecture.  */
-#define PPC_OPCODE_POWER (02)
-
-/* Opcode is defined for the POWER2 (Rios 2) architecture.  */
-#define PPC_OPCODE_POWER2 (04)
-
-/* Opcode is only defined on 32 bit architectures.  */
-#define PPC_OPCODE_32 (010)
-
-/* Opcode is only defined on 64 bit architectures.  */
-#define PPC_OPCODE_64 (020)
-
-/* Opcode is supported by the Motorola PowerPC 601 processor.  The 601
-   is assumed to support all PowerPC (PPC_OPCODE_PPC) instructions,
-   but it also supports many additional POWER instructions.  */
-#define PPC_OPCODE_601 (040)
-
-/* Opcode is supported in both the Power and PowerPC architectures
-   (ie, compiler's -mcpu=common or assembler's -mcom).  */
-#define PPC_OPCODE_COMMON (0100)
-
-/* Opcode is supported for any Power or PowerPC platform (this is
-   for the assembler's -many option, and it eliminates duplicates).  */
-#define PPC_OPCODE_ANY (0200)
-
-/* Opcode is supported as part of the 64-bit bridge.  */
-#define PPC_OPCODE_64_BRIDGE (0400)
-
-/* Opcode is supported by Altivec Vector Unit */
-#define PPC_OPCODE_ALTIVEC (01000)
-
-/* Opcode is supported by PowerPC 403 processor.  */
-#define PPC_OPCODE_403 (02000)
-
-/* Opcode is supported by PowerPC BookE processor.  */
-#define PPC_OPCODE_BOOKE (04000)
-
-/* Opcode is only supported by 64-bit PowerPC BookE processor.  */
-#define PPC_OPCODE_BOOKE64 (010000)
-
-/* Opcode is only supported by Power4 architecture.  */
-#define PPC_OPCODE_POWER4 (020000)
-
-/* Opcode isn't supported by Power4 architecture.  */
-#define PPC_OPCODE_NOPOWER4 (040000)
-
-/* Opcode is only supported by POWERPC Classic architecture.  */
-#define PPC_OPCODE_CLASSIC (0100000)
-
-/* Opcode is only supported by e500x2 Core.  */
-#define PPC_OPCODE_SPE     (0200000)
-
-/* Opcode is supported by e500x2 Integer select APU.  */
-#define PPC_OPCODE_ISEL     (0400000)
-
-/* Opcode is an e500 SPE floating point instruction.  */
-#define PPC_OPCODE_EFS      (01000000)
-
-/* Opcode is supported by branch locking APU.  */
-#define PPC_OPCODE_BRLOCK   (02000000)
-
-/* Opcode is supported by performance monitor APU.  */
-#define PPC_OPCODE_PMR      (04000000)
-
-/* Opcode is supported by cache locking APU.  */
-#define PPC_OPCODE_CACHELCK (010000000)
-
-/* Opcode is supported by machine check APU.  */
-#define PPC_OPCODE_RFMCI    (020000000)
-
-/* A macro to extract the major opcode from an instruction.  */
-#define PPC_OP(i) (((i) >> 26) & 0x3f)
-
-/* The operands table is an array of struct powerpc_operand.  */
-
-struct powerpc_operand
-{
-  /* The number of bits in the operand.  */
-  int bits;
-
-  /* How far the operand is left shifted in the instruction.  */
-  int shift;
-
-  /* Insertion function.  This is used by the assembler.  To insert an
-     operand value into an instruction, check this field.
-
-     If it is NULL, execute
-         i |= (op & ((1 << o->bits) - 1)) << o->shift;
-     (i is the instruction which we are filling in, o is a pointer to
-     this structure, and op is the opcode value; this assumes twos
-     complement arithmetic).
-
-     If this field is not NULL, then simply call it with the
-     instruction and the operand value.  It will return the new value
-     of the instruction.  If the ERRMSG argument is not NULL, then if
-     the operand value is illegal, *ERRMSG will be set to a warning
-     string (the operand will be inserted in any case).  If the
-     operand value is legal, *ERRMSG will be unchanged (most operands
-     can accept any value).  */
-  unsigned long (*insert) PARAMS ((unsigned long instruction, long op,
-				   int dialect,
-				   const char **errmsg));
-
-  /* Extraction function.  This is used by the disassembler.  To
-     extract this operand type from an instruction, check this field.
-
-     If it is NULL, compute
-         op = ((i) >> o->shift) & ((1 << o->bits) - 1);
-	 if ((o->flags & PPC_OPERAND_SIGNED) != 0
-	     && (op & (1 << (o->bits - 1))) != 0)
-	   op -= 1 << o->bits;
-     (i is the instruction, o is a pointer to this structure, and op
-     is the result; this assumes twos complement arithmetic).
-
-     If this field is not NULL, then simply call it with the
-     instruction value.  It will return the value of the operand.  If
-     the INVALID argument is not NULL, *INVALID will be set to
-     non-zero if this operand type can not actually be extracted from
-     this operand (i.e., the instruction does not match).  If the
-     operand is valid, *INVALID will not be changed.  */
-  long (*extract) PARAMS ((unsigned long instruction, int dialect,
-			   int *invalid));
-
-  /* One bit syntax flags.  */
-  unsigned long flags;
-};
-
-/* Elements in the table are retrieved by indexing with values from
-   the operands field of the powerpc_opcodes table.  */
-
-extern const struct powerpc_operand powerpc_operands[];
-
-/* Values defined for the flags field of a struct powerpc_operand.  */
-
-/* This operand takes signed values.  */
-#define PPC_OPERAND_SIGNED (01)
-
-/* This operand takes signed values, but also accepts a full positive
-   range of values when running in 32 bit mode.  That is, if bits is
-   16, it takes any value from -0x8000 to 0xffff.  In 64 bit mode,
-   this flag is ignored.  */
-#define PPC_OPERAND_SIGNOPT (02)
-
-/* This operand does not actually exist in the assembler input.  This
-   is used to support extended mnemonics such as mr, for which two
-   operands fields are identical.  The assembler should call the
-   insert function with any op value.  The disassembler should call
-   the extract function, ignore the return value, and check the value
-   placed in the valid argument.  */
-#define PPC_OPERAND_FAKE (04)
-
-/* The next operand should be wrapped in parentheses rather than
-   separated from this one by a comma.  This is used for the load and
-   store instructions which want their operands to look like
-       reg,displacement(reg)
-   */
-#define PPC_OPERAND_PARENS (010)
-
-/* This operand may use the symbolic names for the CR fields, which
-   are
-       lt  0	gt  1	eq  2	so  3	un  3
-       cr0 0	cr1 1	cr2 2	cr3 3
-       cr4 4	cr5 5	cr6 6	cr7 7
-   These may be combined arithmetically, as in cr2*4+gt.  These are
-   only supported on the PowerPC, not the POWER.  */
-#define PPC_OPERAND_CR (020)
-
-/* This operand names a register.  The disassembler uses this to print
-   register names with a leading 'r'.  */
-#define PPC_OPERAND_GPR (040)
-
-/* This operand names a floating point register.  The disassembler
-   prints these with a leading 'f'.  */
-#define PPC_OPERAND_FPR (0100)
-
-/* This operand is a relative branch displacement.  The disassembler
-   prints these symbolically if possible.  */
-#define PPC_OPERAND_RELATIVE (0200)
-
-/* This operand is an absolute branch address.  The disassembler
-   prints these symbolically if possible.  */
-#define PPC_OPERAND_ABSOLUTE (0400)
-
-/* This operand is optional, and is zero if omitted.  This is used for
-   the optional BF and L fields in the comparison instructions.  The
-   assembler must count the number of operands remaining on the line,
-   and the number of operands remaining for the opcode, and decide
-   whether this operand is present or not.  The disassembler should
-   print this operand out only if it is not zero.  */
-#define PPC_OPERAND_OPTIONAL (01000)
-
-/* This flag is only used with PPC_OPERAND_OPTIONAL.  If this operand
-   is omitted, then for the next operand use this operand value plus
-   1, ignoring the next operand field for the opcode.  This wretched
-   hack is needed because the Power rotate instructions can take
-   either 4 or 5 operands.  The disassembler should print this operand
-   out regardless of the PPC_OPERAND_OPTIONAL field.  */
-#define PPC_OPERAND_NEXT (02000)
-
-/* This operand should be regarded as a negative number for the
-   purposes of overflow checking (i.e., the normal most negative
-   number is disallowed and one more than the normal most positive
-   number is allowed).  This flag will only be set for a signed
-   operand.  */
-#define PPC_OPERAND_NEGATIVE (04000)
-
-/* This operand names a vector unit register.  The disassembler
-   prints these with a leading 'v'.  */
-#define PPC_OPERAND_VR (010000)
-
-/* This operand is for the DS field in a DS form instruction.  */
-#define PPC_OPERAND_DS (020000)
-
-/* The POWER and PowerPC assemblers use a few macros.  We keep them
-   with the operands table for simplicity.  The macro table is an
-   array of struct powerpc_macro.  */
-
-struct powerpc_macro
-{
-  /* The macro name.  */
-  const char *name;
-
-  /* The number of operands the macro takes.  */
-  unsigned int operands;
-
-  /* One bit flags for the opcode.  These are used to indicate which
-     specific processors support the instructions.  The values are the
-     same as those for the struct powerpc_opcode flags field.  */
-  unsigned long flags;
-
-  /* A format string to turn the macro into a normal instruction.
-     Each %N in the string is replaced with operand number N (zero
-     based).  */
-  const char *format;
-};
-
-extern const struct powerpc_macro powerpc_macros[];
-extern const int powerpc_num_macros;
-
-#endif /* PPC_H */