Age | Commit message (Collapse) | Author | Files | Lines |
|
|
|
Some packages call gettext to format a message to be sent to perror.
If the currently set user locale points to a non-existent .mo file,
open via __map_file in dcngettext will set errno to ENOENT.
Maintainer's notes: Non-modification of errno is a documented part of
the interface contract for the GNU version of this function and likely
other versions. The issue being fixed here seems to be a regression
from commit 1b52863e244ecee5b5935b6d36bb9e6efe84c035, which enabled
setting of errno from __map_file.
|
|
|
|
commit a6054e3c94aa0491d7366e4b05ae0d73f661bfe2 removed the argument,
making it a constraint violation to pass one. caught by cparser/firm;
other compilers seem to ignore it.
|
|
apparently some distros use this form, and it seems to be supported in
the gcc build system.
|
|
commit 84d061d5a31c9c773e29e1e2b1ffe8cb9557bc58 attempted to do this
already, but omitted from pthread_key_create.c the weak definition of
__pthread_key_delete_synccall, so that the definition provided by
pthread_key_delete.c was always pulled in.
based on patch by Markus Wichmann, but with a weak alias rather than
weak reference for consistency/policy about dependence on tooling
features.
|
|
fallback to /etc/shadow should happen only when the entry is not found
in the TCB shadow. otherwise transient errors or permission errors can
cause inconsistent results.
|
|
this case is specified as success with a null result, rather than an
error, and errno is not to be set on success.
|
|
this reverts commit c0ed5a201b2bdb6d1896064bec0020c9973db0a1, which
was based on a mistaken reading of POSIX due to inconsistency between
the description (which requires return upon interruption by a signal)
and the errors list (which wrongly lists EINTR as "may fail").
since the previously-introduced behavior was a workaround for an old
kernel bug to ensure safety of correct programs that were not hardened
against the bug, an effort has been made to preserve it for programs
which do not use interrupting signal handlers. the stage for this was
set in commit a63c0104e496f7ba78b64be3cd299b41e8cd427f, which makes
the futex __timedwait backend suppress EINTR if it's seen when no
interrupting signal handlers have been installed.
based loosely on a patch submitted by Orivej Desh, but with
unnecessary additional changes removed.
|
|
the resolution of Austin Group issue #1132 changes the requirement to
fail so that it only applies when the set argument (new mask) is
non-null. this change was made for consistency with the description,
which specified "if set is a null pointer, the value of the argument
how is not significant".
|
|
prior to linux 2.6.22, futex wait could fail with EINTR even for
non-interrupting (SA_RESTART) signals. this was no problem provided
the caller simply restarted the wait, but sem_[timed]wait is required
by POSIX to return when interrupted by a signal. commit
a113434cd68ce30642c4995b1caadcd084be6f09 introduced this behavior, and
commit c0ed5a201b2bdb6d1896064bec0020c9973db0a1 reverted it based on a
mistaken belief that it was not required. this belief stems from a bug
in the specification: the description requires the function to return
when interrupted, but the errors section marks EINTR as a "may fail"
condition rather than a "shall fail" one.
since there does seem to be significant value in the change made in
commit c0ed5a201b2bdb6d1896064bec0020c9973db0a1, making it so that
programs that call sem_wait without checking for EINTR don't silently
make forward progress without obtaining the semaphore or treat it as a
fatal error and abort, add a behind-the-scenes mechanism in the
__timedwait backend to suppress EINTR in programs that have never
installed interrupting signal handlers, and have sigaction track and
report this state. this way the semaphore code is not cluttered by
workarounds and can be updated (to be done in next commit) to reflect
the high-level logic for conforming behavior.
these changes are based loosely on a patch by Markus Wichmann, with
the main changes being atomic update to flag object and moving the
workaround from sem_timedwait to the __timedwait futex backend.
|
|
it's not clear whether this is required, but it seems arguable that it
should happen. for example aio_suspend is supposed to return
immediately if any of the operations has "completed", which includes
ending with an error status asynchonously and might also be
interpreted to include doing so synchronously.
|
|
the map structures in particular are permanent once created, and thus
a large number of aio function calls with invalid file descriptors
could exhaust memory, whereas, assuming normal resource limits, only a
very small number of entries ever need to be allocated. check validity
of the fd before allocating anything new, so that allocation of large
amounts of memory is only possible when resource limits have been
increased and a large number of files are actually open.
this change also improves error reporting for bad file descriptors to
happen at the time the aio submission call is made, as opposed to
asynchronously.
|
|
since commit c9f415d7ea2dace5bf77f6518b6afc36bb7a5732, it has been
possible that the allocator is application-provided code, which cannot
necessarily run safely on io thread stacks, and which should not be
able to see the existence of io threads, since they are an
implementation detail.
instead of having the io thread request and possibly allocate its
queue (and the map structures leading to it), make the submitting
thread responsible for this, and pass the queue pointer into the io
thread via its args structure. this eliminates the only early error
case in io threads, making it no longer necessary to pass an error
status back to the submitting thread via the args structure.
|
|
aio threads not using SIGEV_THREAD notification are created with small
stacks and no guard page, which is possible since they only run the
code for the requested io operation, not any application code. the
motivation is not creating a lot of VMAs. however, the io thread needs
to be able to receive a cancellation signal in case aio_cancel
(implemented via pthread_cancel) is called. this requires sufficient
stack space for a signal frame, which PTHREAD_STACK_MIN does not
necessarily include.
in principle MINSIGSTKSZ from signal.h should give us sufficient space
for a signal frame, but the value is incorrect on some existing archs
due to kernel addition of new vector register support without
consideration for impact on ABI. some powerpc models exceed
MINSIGSTKSZ by about 0.5k, and x86[_64] with AVX-512 can exceed it by
up to about 1.5k. so use MINSIGSTKSZ+2048 to allow for the discrepancy
plus some working space.
unfortunately, it's possible that signal frame sizes could continue to
grow, and some archs (aarch64) explicitly specify that they may.
passing of a runtime value for MINSIGSTKSZ via AT_MINSIGSTKSZ in the
aux vector was added to aarch64 linux, and presumably other archs will
use this mechanism to report if they further increase the signal frame
size. when AT_MINSIGSTKSZ is present, assume it's correct, so that we
only need a small amount of working space in addition to it; in this
case just add 512.
|
|
|
|
used for device driver dump in /proc/vmcore
new in linux commit 2724273e8fd00b512596a77ee063f49b25f36507
|
|
new in linux commit 94b07c1f8c39c6d839df35fa28ffd1785d385897
currently only supported on aarch64
|
|
io_pgetevents is new in linux commit
7a074e96dee62586c935c80cecd931431bfdd0be
rseq is new in linux commit
d7822b1e24f2df5df98c76f0e94a5416349ff759
|
|
used for undiagnosed trap exceptions where linux previously set si_code
to 0. new in linux commit db78e6a0a6f9f7d7277965600eeb1a5b3a6f55a8
|
|
new in linux commit 76b7f670730e87974f71df9f6129811e2769666e
in struct signalfd_siginfo the pad member is changed to __pad to keep
the namespace clean, it's not part of the public api.
|
|
new address family and related macros were added in linux commit
68e8b849b221b37a78a110a0307717d45e3593a0
|
|
add UDP_NO_CHECK6_* to restrict zero UDP6 checksums, new in linux commit
1c19448c9ba6545b80ded18488a64a7f3d8e6998 (pre-v4.18 change, was missed)
add UDP_SEGMENT to support generic segmentation offload for udp datagrams,
bec1f6f697362c5bc635dacd7ac8499d0a10a4e7 (new in v4.18)
|
|
add packet delivery info to tcp_info,
new in linux commit feb5f2ec646483fb66f9ad7218b1aad2a93a2a5c
add TCP_ZEROCOPY_RECEIVE socket option for zerocopy receive,
new in linux commit 05255b823a6173525587f29c4e8f1ca33fd7677d
add TCP_INQ socket option and TCP_CM_INQ cmsg to get in-queue bytes in cmsg
upon read, new in linux commit b75eba76d3d72e2374fac999926dafef2997edd2
add TCP_REPAIR_* to fix repair socket window probe patch,
new in linux commit 31048d7aedf31bf0f69c54a662944632f29d82f2
|
|
|
|
memccpy would return a pointer over the given size when c is not
found in the source buffer and n reaches 0.
|
|
commit b9410061e2ad6fe91bb3910c3adc7d4a315b7ce9 inadvertently omitted
optopt from the "dynamic list", causing it to be split into separate
objects that don't share their value if the main program contains a
copy relocation for it (for non-PIE executables that access it, and
some PIE ones, depending on arch and toolchain versions/options).
|
|
first, the condition (mem && k < p) is redundant, because mem being
nonzero implies the needle is periodic with period exactly p, in which
case any byte that appears in the needle must appear in the last p
bytes of the needle, bounding the shift (k) by p.
second, the whole point of replacing the shift k by mem (=l-p) is to
prevent shifting by less than mem when discarding the memory on shift,
in which case linear time could not be guaranteed. but as written, the
check also replaced shifts greater than mem by mem, reducing the
benefit of the shift. there is no possible benefit to this reduction of
the shift; since mem is being cleared, the full shift is valid and
more optimal. so only replace the shift by mem when it would be less
than mem.
|
|
commit d88e5dfa8b989dafff4b748bfb3cba3512c8482e inadvertently changed
the argument pased to __get_locale from part (the current ;-delimited
component) to name (the full string).
|
|
commit ddc947eda311331959c73dbc4491afcfe2326346 fixed the
corresponding bug for exit which was introduced when commit
0b80a7b0404b6e49b0b724e3e3fe0ed5af3b08ef added support for
caller-provided buffers, making it possible for stderr to be a
buffered stream.
|
|
fflush(NULL) and __stdio_exit lock individual FILEs while holding the
open file list lock to walk the list. since fclose first locked the
FILE to be closed, then the ofl lock, it could deadlock with these
functions.
also, because fclose removed the FILE to be closed from the open file
list before flushing and closing it, a concurrent fclose or exit could
complete successfully before fclose flushed the FILE it was closing,
resulting in data loss.
reorder the body of fclose to first flush and close the file, then
remove it from the open file list only after unlocking it. this
creates a window where consumers of the open file list can see dead
FILE objects, but in the absence of undefined behavior on the part of
the application, such objects will be in an inactive-buffer state and
processing them will have no side effects.
__unlist_locked_file is also moved so that it's performed only for
non-permanent files. this change is not necessary, but preserves
consistency (and thereby provides safety/hardening) in the case where
an application uses one of the standard streams after closing it while
holding an explicit lock on it. such usage is of course undefined
behavior.
|
|
Use "+r" in the asm instead of implementing a non-transparent copy by
applying "0" constraint to the source value. Introduce a typedef for
the function type to avoid spelling it out twice.
|
|
this was leftover from before the initial commit.
|
|
mem0 && mem && ... is redundant since mem can only be nonzero when
mem0 is nonzero.
|
|
a caller needs the reason for open (or fstat, albeit unlikely) failure
if it's going to make decisions about continuing a path search or
similar.
|
|
commit aeeac9ca5490d7d90fe061ab72da446c01ddf746 introduced fail-safe
invariants that creating a locale_t object for the C locale or C.UTF-8
locale will always succeed. extend the guarantee to also cover the
following:
- newlocale(LC_ALL_MASK, "", 0)
- newlocale(LC_ALL_MASK-LC_CTYPE_MASK, "C", 0)
provided that the LANG/LC_* environment variables have not been
changed by the program. these usages are idiomatic for getting the
default locale, and for getting a locale that behaves as the C locale
except for honoring the default locale's character encoding.
|
|
unify the code paths for allocated and non-allocated locale objects,
always using a tmp object. this is necessary to avoid clobbering the
base locale object too soon if we allow for the possibility that
looking up an explicitly requested locale name may fail, and makes the
code simpler and cleaner anyway.
eliminate the complex and fragile logic for checking whether one of
the non-allocated locale objects can be used for the result, and
instead just memcmp against each of them.
|
|
commit 63c188ec42e76ff768e81f6b65b11c68fc43351e missed making this
change when switching from atomics to locking for modification of the
global locale, leaving access to locale structures unnecessarily
burdened with the restrictions of volatile.
the volatile qualification was originally added in commit
56fbaa3bbe73f12af2bfbbcf2adb196e6f9fe264.
|
|
introduce a new LOC_MAP_FAILED sentinel for errors, since null
pointers for a category's locale map indicate the C locale. at this
time, __get_locale does not fail, so there should be no functional
change by this commit.
|
|
the choice of signed char for lbf was a theoretically space-saving
hack that was not helping, and was unwantedly expensive. while
comparing bytes against a byte-sized member sounds easy, the trick
here was that the byte to be compared was unsigned while the lbf
member was signed, making it possible to set lbf negative to disable
line buffering. however, this imposed a requirement to promote both
operands, zero-extending one and sign-extending the other, in order to
compare them.
to fix this, repurpose the waiters count slot (unused since commit
c21f750727515602a9e84f2a190ee8a0a2aeb2a1). while we're at it, switch
mode (orientation) from signed char to int as well. this makes no
semantic difference (its only possible values are -1, 0, and 1) but it
might help on archs where byte access is awkward.
|
|
to check whether flush due to line buffering is needed, the int-type
character argument must be truncated to unsigned char for comparison.
if the original value is subsequently passed to __overflow, it must be
preserved, adding to register pressure. since it doesn't matter,
truncate all uses so the original value is no longer live.
|
|
the internal putc_unlocked macro was wrongly returning a meaningless
boolean result rather than the written character or EOF.
bug was found by reading (very surprising) asm.
|
|
check whether the lock is free before loading the calling thread's
tid. if so, just use a dummy tid value that cannot compare equal to
any actual thread id (because it's one bit wider). this also avoids
the need to save the tid and pass it to locking_getc or locking_putc,
reducing register pressure.
this change might slightly hurt the case where the caller already
holds the lock, but it does not affect the single-threaded case, and
may significantly improve the multi-threaded case, especially on archs
where loading the thread pointer is disproportionately expensive like
early mips and arm ISA levels. but even on i386 it helps, at least on
some machines; I measured roughly a 10-15% improvement.
|
|
this is not needed for correctness, but doesn't hurt, and in some
cases the compiler may pessimize the call assuming the callee might be
variadic when it lacks a prototype.
|
|
commit 4390383b32250a941ec616e8bff6f568a801b1c0 inadvertently used "r"
instead of "0" for the input constraint, which only happened to work
for the configuration I tested it on because it usually makes sense
for the compiler to choose the same input and output register.
|
|
commit d664061adb4d7f6647ab2059bc351daa394bf5da inadvertently omitted
the new file putc.h.
|
|
by ABI, the public stdin/out/err macros use extern pointer objects,
and this is necessary to avoid copy relocations that would be
expensive and make the size of the FILE structure part of the ABI.
however, internally it makes sense to access the underlying FILE
objects directly. this avoids both an indirection through the GOT to
find the address of the stdin/out/err pointer objects (which can't be
computed PC-relative because they may have been moved to the main
program by copy relocations) and an indirection through the resulting
pointer object.
in most places this is just a minor optimization, but in the case of
getchar and putchar (and the unlocked versions thereof), ipa constant
propagation makes all accesses to members of stdin/out PC-relative or
GOT-relative, possibly reducing register pressure as well.
|
|
this is the analog of commit dd8f02b7dce53d6b1c4282439f1636a2d63bee01,
but for putc.
|
|
with these changes, in a program that has not created any threads
besides the main thread and that has not called f[try]lockfile, getc
performs indistinguishably from getc_unlocked. this was measured on
several i386 and x86_64 models, and should hold on other archs too
simply by the properties of the code generation.
the case where the caller already holds the lock (via flockfile) is
improved significantly as well (40-60% reduction in time on machines
tested) and the case where locking is needed is improved somewhat
(roughly 10%).
the key technique used here is forcing the non-hot path out-of-line
and enabling it to be a tail call. a static noinline function
(conditional on __GNUC__) is used rather than the extern hiddens used
elsewhere for this purpose, so that the compiler can choose
non-default calling conventions, making it possible to tail-call to a
callee that takes more arguments than the caller on archs where
arguments are passed on the stack or must have space reserved on the
stack for spilling the. the tid could just be reloaded via the thread
pointer in locking_getc, but that would be ridiculously expensive on
some archs where thread pointer load requires a trap or syscall.
|
|
on multiple occasions I've started to flatten/inline the code in
__init_libc, only to rediscover the reason it was not inlined: GCC
fails to deallocate its stack (and now, with the changes in commit
4390383b32250a941ec616e8bff6f568a801b1c0, fails to produce a tail call
to the stage 2 function; see PR #87639) before calling main if it was
inlined.
document this with a comment and use an explicit noinline attribute if
__GNUC__ is defined so that even with CFLAGS that heavily favor
inlining it won't get inlined.
|