# Fortran Extensions supported by Flang ```{contents} --- local: --- ``` As a general principle, this compiler will accept by default and without complaint many legacy features, extensions to the standard language, and features that have been deleted from the standard, so long as the recognition of those features would not cause a standard-conforming program to be rejected or misinterpreted. Other non-standard features, which do conflict with the current standard specification of the Fortran programming language, are accepted if enabled by command-line options. ## Intentional violations of the standard * Scalar `INTEGER` actual argument expressions (not variables!) are converted to the kinds of scalar `INTEGER` dummy arguments when the interface is explicit and the kinds differ. This conversion allows the results of the intrinsics like `SIZE` that (as mentioned below) may return non-default `INTEGER` results by default to be passed. A warning is emitted when truncation is possible. These conversions are not applied in calls to non-intrinsic generic procedures. * We are not strict on the contents of `BLOCK DATA` subprograms so long as they contain no executable code, no internal subprograms, and allocate no storage outside a named `COMMON` block. (C1415) * Delimited list-directed (and NAMELIST) character output is required to emit contiguous doubled instances of the delimiter character when it appears in the output value. When fixed-size records are being emitted, as is the case with internal output, this is not possible when the problematic character falls on the last position of a record. No two other Fortran compilers do the same thing in this situation so there is no good precedent to follow. Because it seems least wrong, we emit one copy of the delimiter as the last character of the current record and another as the first character of the next record. (The second-least-wrong alternative might be to flag a runtime error, but that seems harsh since it's not an explicit error in the standard, and the output may not have to be usable later as input anyway.) Consequently, the output is not suitable for use as list-directed or NAMELIST input. If a later standard were to clarify this case, this behavior will change as needed to conform. ``` character(11) :: buffer(3) character(10) :: quotes = '""""""""""' write(buffer,*,delim="QUOTE") quotes print "('>',a10,'<')", buffer end ``` * The name of the control variable in an implied DO loop in an array constructor or DATA statement has a scope over the value-list only, not the bounds of the implied DO loop. It is not advisable to use an object of the same name as the index variable in a bounds expression, but it will work, instead of being needlessly undefined. * If both the `COUNT=` and the `COUNT_MAX=` optional arguments are present on the same call to the intrinsic subroutine `SYSTEM_CLOCK`, we require that their types have the same integer kind, since the kind of these arguments is used to select the clock rate. In common with some other compilers, the clock rate varies from tenths of a second to nanoseconds depending on argument kind and platform support. * If a dimension of a descriptor has zero extent in a call to `CFI_section`, `CFI_setpointer` or `CFI_allocate`, the lower bound on that dimension will be set to 1 for consistency with the `LBOUND()` intrinsic function. * `-2147483648_4` is, strictly speaking, a non-conforming literal constant on a machine with 32-bit two's-complement integers as kind 4, because the grammar of Fortran expressions parses it as a negation of a literal constant, not a negative literal constant. This compiler accepts it with a portability warning. * Construct names like `loop` in `loop: do j=1,n` are defined to be "local identifiers" and should be distinct in the "inclusive scope" -- i.e., not scoped by `BLOCK` constructs. As most (but not all) compilers implement `BLOCK` scoping of construct names, so does f18, with a portability warning. * 15.6.4 paragraph 2 prohibits an implicitly typed statement function from sharing the same name as a symbol in its scope's host, if it has one. We accept this usage with a portability warning. * A module name from a `USE` statement can also be used as a non-global name in the same scope. This is not conforming, but it is useful and unambiguous. * The argument to `RANDOM_NUMBER` may not be an assumed-size array. * `NULL()` without `MOLD=` is not allowed to be associated as an actual argument corresponding to an assumed-rank dummy argument; its rank in the called procedure would not be well-defined. * When an index variable of a `FORALL` or `DO CONCURRENT` is present in the enclosing scope, and the construct does not have an explicit type specification for its index variables, some weird restrictions in F'2023 subclause 19.4 paragraphs 6 & 8 should apply. Since this compiler properly scopes these names, violations of these restrictions elicit only portability warnings by default. * The standard defines the intrinsic functions `MOD` and `MODULO` for real arguments using expressions in terms of `AINT` and `FLOOR`. These definitions yield fairly poor results due to floating-point cancellation, and every Fortran compiler (including this one) uses better algorithms. * When an index variable of a `FORALL` or `DO CONCURRENT` is present in the enclosing scope, and the construct does not have an explicit type specification for its index variables, some weird restrictions in F'2023 subclause 19.4 paragraphs 6 & 8 should apply. Since this compiler properly scopes these names, violations of these restrictions elicit only portability warnings by default. ## Extensions, deletions, and legacy features supported by default * Tabs in source * `<>` as synonym for `.NE.` and `/=` * `$` and `@` as legal characters in names * Initialization in type declaration statements using `/values/` * Saved variables without explicit or default initializers are zero initialized. * In a saved entity of a type with a default initializer, components without default values are zero initialized. * Kind specification with `*`, e.g. `REAL*4` * `DOUBLE COMPLEX` as a synonym for `COMPLEX(KIND(0.D0))` -- but not when spelled `TYPE(DOUBLECOMPLEX)`. * Signed complex literal constants * DEC `STRUCTURE`, `RECORD`, with '%FILL'; but `UNION`, and `MAP` are not yet supported throughout compilation, and elicit a "not yet implemented" message. * Structure field access with `.field` * `BYTE` as synonym for `INTEGER(KIND=1)`; but not when spelled `TYPE(BYTE)`. * When kind-param is used for REAL literals, allow a matching exponent letter * Quad precision REAL literals with `Q` * `X` prefix/suffix as synonym for `Z` on hexadecimal literals * `B`, `O`, `Z`, and `X` accepted as suffixes as well as prefixes * Support for using bare `L` in FORMAT statement * Triplets allowed in array constructors * `%LOC`, `%VAL`, and `%REF` * Leading comma allowed before I/O item list * Empty parentheses allowed in `PROGRAM P()` * Missing parentheses allowed in `FUNCTION F` * Cray based `POINTER(p,x)` and `LOC()` intrinsic (with `%LOC()` as an alias) * Arithmetic `IF`. (Which branch should NaN take? Fall through?) * `ASSIGN` statement, assigned `GO TO`, and assigned format * `PAUSE` statement * Hollerith literals and edit descriptors * `NAMELIST` allowed in the execution part * Omitted colons on type declaration statements with attributes * COMPLEX constructor expression, e.g. `(x+y,z)` * `+` and `-` before all primary expressions, e.g. `x*-y` * `.NOT. .NOT.` accepted * `NAME=` as synonym for `FILE=` * Data edit descriptors without width or other details * `D` lines in fixed form as comments or debug code * `CARRIAGECONTROL=` on the OPEN and INQUIRE statements * `CONVERT=` on the OPEN and INQUIRE statements * `DISPOSE=` on the OPEN and INQUIRE statements * Leading semicolons are ignored before any statement that could have a label * The character `&` in column 1 in fixed form source is a variant form of continuation line. * Character literals as elements of an array constructor without an explicit type specifier need not have the same length; the longest literal determines the length parameter of the implicit type, not the first. * Outside a character literal, a comment after a continuation marker (&) need not begin with a comment marker (!). * Classic C-style /*comments*/ are skipped, so multi-language header files are easier to write and use. * $ and \ edit descriptors are supported in FORMAT to suppress newline output on user prompts. * Tabs in format strings (not `FORMAT` statements) are allowed on output. * REAL and DOUBLE PRECISION variable and bounds in DO loops * Integer literals without explicit kind specifiers that are out of range for the default kind of INTEGER are assumed to have the least larger kind that can hold them, if one exists. * BOZ literals can be used as INTEGER values in contexts where the type is unambiguous: the right hand sides of assignments and initializations of INTEGER entities, as actual arguments to a few intrinsic functions (ACHAR, BTEST, CHAR), and as actual arguments of references to procedures with explicit interfaces whose corresponding dummy argument has a numeric type to which the BOZ literal may be converted. BOZ literals are interpreted as default INTEGER only when they appear as the first items of array constructors with no explicit type. Otherwise, they generally cannot be used if the type would not be known (e.g., `IAND(X'1',X'2')`). * BOZ literals can also be used as REAL values in some contexts where the type is unambiguous, such as initializations of REAL parameters. * EQUIVALENCE of numeric and character sequences (a ubiquitous extension), as well as of sequences of non-default kinds of numeric types with each other. * Values for whole anonymous parent components in structure constructors (e.g., `EXTENDEDTYPE(PARENTTYPE(1,2,3))` rather than `EXTENDEDTYPE(1,2,3)` or `EXTENDEDTYPE(PARENTTYPE=PARENTTYPE(1,2,3))`). * Some intrinsic functions are specified in the standard as requiring the same type and kind for their arguments (viz., ATAN with two arguments, ATAN2, DIM, HYPOT, IAND, IEOR, IOR, MAX, MIN, MOD, and MODULO); we allow distinct types to be used, promoting the arguments as if they were operands to an intrinsic `+` operator, and defining the result type accordingly. * DOUBLE COMPLEX intrinsics DREAL, DCMPLX, DCONJG, and DIMAG. * The DFLOAT intrinsic function. * INT_PTR_KIND intrinsic returns the kind of c_intptr_t. * Restricted specific conversion intrinsics FLOAT, SNGL, IDINT, IFIX, DREAL, and DCMPLX accept arguments of any kind instead of only the default kind or double precision kind. Their result kinds remain as specified. * Specific intrinsics AMAX0, AMAX1, AMIN0, AMIN1, DMAX1, DMIN1, MAX0, MAX1, MIN0, and MIN1 accept more argument types than specified. They are replaced by the related generics followed by conversions to the specified result types. * When a scalar CHARACTER actual argument of the same kind is known to have a length shorter than the associated dummy argument, it is extended on the right with blanks, similar to assignment. * When a dummy argument is `POINTER` or `ALLOCATABLE` and is `INTENT(IN)`, we relax enforcement of some requirements on actual arguments that must otherwise hold true for definable arguments. * Assignment of `LOGICAL` to `INTEGER` and vice versa (but not other types) is allowed. The values are normalized to canonical `.TRUE.`/`.FALSE.`. The values are also normalized for assignments of `LOGICAL(KIND=K1)` to `LOGICAL(KIND=K2)`, when `K1 != K2`. * Static initialization of `LOGICAL` with `INTEGER` is allowed in `DATA` statements and object initializers. The results are *not* normalized to canonical `.TRUE.`/`.FALSE.`. Static initialization of `INTEGER` with `LOGICAL` is also permitted. * An effectively empty source file (no program unit) is accepted and produces an empty relocatable output file. * A `RETURN` statement may appear in a main program. * DATA statement initialization is allowed for procedure pointers outside structure constructors. * Nonstandard intrinsic functions: ISNAN, SIZEOF * A forward reference to a default INTEGER scalar dummy argument or `COMMON` block variable is permitted to appear in a specification expression, such as an array bound, in a scope with IMPLICIT NONE(TYPE) if the name of the variable would have caused it to be implicitly typed as default INTEGER if IMPLICIT NONE(TYPE) were absent. * OPEN(ACCESS='APPEND') is interpreted as OPEN(POSITION='APPEND') to ease porting from Sun Fortran. * Intrinsic subroutines EXIT([status]) and ABORT() * The definition of simple contiguity in 9.5.4 applies only to arrays; we also treat scalars as being trivially contiguous, so that they can be used in contexts like data targets in pointer assignments with bounds remapping. * The `CONTIGUOUS` attribute can be redundantly applied to simply contiguous objects, including scalars, with a portability warning. * We support some combinations of specific procedures in generic interfaces that a strict reading of the standard would preclude when their calls must nonetheless be distinguishable. Specifically, `ALLOCATABLE` dummy arguments are distinguishing if an actual argument acceptable to one could not be passed to the other & vice versa because exactly one is polymorphic or exactly one is unlimited polymorphic). * External unit 0 is predefined and connected to the standard error output, and defined as `ERROR_UNIT` in the intrinsic `ISO_FORTRAN_ENV` module. * Objects in blank COMMON may be initialized. * Initialization of COMMON blocks outside of BLOCK DATA subprograms. * Multiple specifications of the SAVE attribute on the same object are allowed, with a warning. * Specific intrinsic functions BABS, IIABS, JIABS, KIABS, ZABS, and CDABS. * A `POINTER` component's type need not be a sequence type when the component appears in a derived type with `SEQUENCE`. (This case should probably be an exception to constraint C740 in the standard.) * Format expressions that have type but are not character and not integer scalars are accepted so long as they are simply contiguous. This legacy extension supports pre-Fortran'77 usage in which variables initialized in DATA statements with Hollerith literals as modifiable formats. * At runtime, `NAMELIST` input will skip over `NAMELIST` groups with other names, and will treat text before and between groups as if they were comment lines, even if not begun with `!`. * Commas are required in FORMAT statements and character variables only when they prevent ambiguity. * Legacy names `AND`, `OR`, and `XOR` are accepted as aliases for the standard intrinsic functions `IAND`, `IOR`, and `IEOR` respectively. * A digit count of d=0 is accepted in Ew.0, Dw.0, and Gw.0 output editing if no nonzero scale factor (kP) is in effect. * The name `IMAG` is accepted as an alias for the generic intrinsic function `AIMAG`. * The legacy extension intrinsic functions `IZEXT` and `JZEXT` are supported; `ZEXT` has different behavior with various older compilers, so it is not supported. * f18 doesn't impose a limit on the number of continuation lines allowed for a single statement. * When a type-bound procedure declaration statement has neither interface nor attributes, the "::" before the bindings is optional, even if a binding has renaming with "=> proc". The colons are not necessary for an unambiguous parse, C768 notwithstanding. * A type-bound procedure binding can be passed as an actual argument corresponding to a dummy procedure and can be used as the target of a procedure pointer assignment statement. * An explicit `INTERFACE` can declare the interface of a procedure pointer even if it is not a dummy argument. * A `NOPASS` type-bound procedure binding is required by C1529 to apply only to a scalar data-ref, but most compilers don't enforce it and the constraint is not necessary for a correct implementation. * A label may follow a semicolon in fixed form source. * A scalar logical dummy argument to a `BIND(C)` procedure does not have to have `KIND=C_BOOL` since it can be converted to/from `_Bool` without loss of information. * The character length of the `SOURCE=` or `MOLD=` in `ALLOCATE` may be distinct from the constant character length, if any, of an allocated object. * When a name is brought into a scope by multiple ways, such as USE-association as well as an `IMPORT` from its host, it's an error only if the resolution is ambiguous. * An entity may appear in a `DATA` statement before its explicit type declaration under `IMPLICIT NONE(TYPE)`. * `INCLUDE` lines can start in any column, can be preceded in fixed form source by a '0' in column 6, can contain spaces between the letters of the word INCLUDE, and can have a numeric character literal kind prefix on the file name. * Intrinsic procedures TAND and ATAND. Constant folding is currently not supported for these procedures but this is planned. * When a pair of quotation marks in a character literal are split by a line continuation in free form, the second quotation mark may appear at the beginning of the continuation line without an ampersand, althought one is required by the standard. * Unrestricted `INTRINSIC` functions are accepted for use in `PROCEDURE` statements in generic interfaces, as in some other compilers. * A `NULL()` pointer is treated as an unallocated allocatable when associated with an `INTENT(IN)` allocatable dummy argument. * `READ(..., SIZE=n)` is accepted with `NML=` and `FMT=*` with a portability warning. The Fortran standard doesn't allow `SIZE=` with formatted input modes that might require look-ahead, perhaps to ease implementations. * When a file included via an `INCLUDE` line or `#include` directive has a continuation marker at the end of its last line in free form, Fortran line continuation works. * A `NAMELIST` input group may omit its trailing `/` character if it is followed by another `NAMELIST` input group. * A `NAMELIST` input group may begin with either `&` or `$`. * A comma in a fixed-width numeric input field terminates the field rather than signaling an invalid character error. ### Extensions supported when enabled by options * C-style backslash escape sequences in quoted CHARACTER literals (but not Hollerith) [-fbackslash], including Unicode escapes with `\U`. * Logical abbreviations `.T.`, `.F.`, `.N.`, `.A.`, `.O.`, and `.X.` [-flogical-abbreviations] * `.XOR.` as a synonym for `.NEQV.` [-fxor-operator] * The default `INTEGER` type is required by the standard to occupy the same amount of storage as the default `REAL` type. Default `REAL` is of course 32-bit IEEE-754 floating-point today. This legacy rule imposes an artificially small constraint in some cases where Fortran mandates that something have the default `INTEGER` type: specifically, the results of references to the intrinsic functions `SIZE`, `STORAGE_SIZE`,`LBOUND`, `UBOUND`, `SHAPE`, and the location reductions `FINDLOC`, `MAXLOC`, and `MINLOC` in the absence of an explicit `KIND=` actual argument. We return `INTEGER(KIND=8)` by default in these cases when the `-flarge-sizes` option is enabled. `SIZEOF` and `C_SIZEOF` always return `INTEGER(KIND=8)`. * Treat each specification-part like is has `IMPLICIT NONE` [-fimplicit-none-type-always] * Ignore occurrences of `IMPLICIT NONE` and `IMPLICIT NONE(TYPE)` [-fimplicit-none-type-never] * Old-style `PARAMETER pi=3.14` statement without parentheses [-falternative-parameter-statement] ### Extensions and legacy features deliberately not supported * `.LG.` as synonym for `.NE.` * `REDIMENSION` * Allocatable `COMMON` * Expressions in formats * `ACCEPT` as synonym for `READ *` * `TYPE` as synonym for `PRINT` * `ARRAY` as synonym for `DIMENSION` * `VIRTUAL` as synonym for `DIMENSION` * `ENCODE` and `DECODE` as synonyms for internal I/O * `IMPLICIT AUTOMATIC`, `IMPLICIT STATIC` * Default exponent of zero, e.g. `3.14159E` * Characters in defined operators that are neither letters nor digits * `B` suffix on unquoted octal constants * `Z` prefix on unquoted hexadecimal constants (dangerous) * `T` and `F` as abbreviations for `.TRUE.` and `.FALSE.` in DATA (PGI/XLF) * Use of host FORMAT labels in internal subprograms (PGI-only feature) * ALLOCATE(TYPE(derived)::...) as variant of correct ALLOCATE(derived::...) (PGI only) * Defining an explicit interface for a subprogram within itself (PGI only) * USE association of a procedure interface within that same procedure's definition * NULL() as a structure constructor expression for an ALLOCATABLE component (PGI). * Conversion of LOGICAL to INTEGER in expressions. * Use of INTEGER data with the intrinsic logical operators `.NOT.`, `.AND.`, `.OR.`, and `.XOR.`. * IF (integer expression) THEN ... END IF (PGI/Intel) * Comparison of LOGICAL with ==/.EQ. rather than .EQV. (also .NEQV.) (PGI/Intel) * Procedure pointers in COMMON blocks (PGI/Intel) * Underindexing multi-dimensional arrays (e.g., A(1) rather than A(1,1)) (PGI only) * Legacy PGI `NCHARACTER` type and `NC` Kanji character literals * Using non-integer expressions for array bounds (e.g., REAL A(3.14159)) (PGI/Intel) * Mixing INTEGER types as operands to bit intrinsics (e.g., IAND); only two compilers support it, and they disagree on sign extension. * Module & program names that conflict with an object inside the unit (PGI only). * When the same name is brought into scope via USE association from multiple modules, the name must refer to a generic interface; PGI allows a name to be a procedure from one module and a generic interface from another. * Type parameter declarations must come first in a derived type definition; some compilers allow them to follow `PRIVATE`, or be intermixed with the component declarations. * Wrong argument types in calls to specific intrinsics that have different names than the related generics. Some accepted exceptions are listed above in the allowed extensions. PGI, Intel, and XLF support this in ways that are not numerically equivalent. PGI converts the arguments while Intel and XLF replace the specific by the related generic. * VMS listing control directives (`%LIST`, `%NOLIST`, `%EJECT`) * Continuation lines on `INCLUDE` lines * `NULL()` actual argument corresponding to an `ALLOCATABLE` dummy data object * User (non-intrinsic) `ELEMENTAL` procedures may not be passed as actual arguments, in accordance with the standard; some Fortran compilers permit such usage. * Constraint C1406, which prohibits the same module name from being used in a scope for both an intrinsic and a non-intrinsic module, is implemented as a portability warning only, not a hard error. * IBM @PROCESS directive is accepted but ignored. ## Preprocessing behavior * The preprocessor is always run, whatever the filename extension may be. * We respect Fortran comments in macro actual arguments (like GNU, Intel, NAG; unlike PGI and XLF) on the principle that macro calls should be treated like function references. Fortran's line continuation methods also work. ## Standard features not silently accepted * Fortran explicitly ignores type declaration statements when they attempt to type the name of a generic intrinsic function (8.2 p3). One can declare `CHARACTER::COS` and still get a real result from `COS(3.14159)`, for example. f18 will complain when a generic intrinsic function's inferred result type does not match an explicit declaration. This message is a warning. ## Standard features that might as well not be * f18 supports designators with constant expressions, properly constrained, as initial data targets for data pointers in initializers of variable and component declarations and in `DATA` statements; e.g., `REAL, POINTER :: P => T(1:10:2)`. This Fortran 2008 feature might as well be viewed like an extension; no other compiler that we've tested can handle it yet. * According to 11.1.3.3p1, if a selector of an `ASSOCIATE` or related construct is defined by a variable, it has the `TARGET` attribute if the variable was a `POINTER` or `TARGET`. We read this to include the case of the variable being a pointer-valued function reference. No other Fortran compiler seems to handle this correctly for `ASSOCIATE`, though NAG gets it right for `SELECT TYPE`. * The standard doesn't explicitly require that a named constant that appears as part of a complex-literal-constant be a scalar, but most compilers emit an error when an array appears. f18 supports them with a portability warning. * f18 does not enforce a blanket prohibition against generic interfaces containing a mixture of functions and subroutines. Apart from some contexts in which the standard requires all of a particular generic interface to have only all functions or all subroutines as its specific procedures, we allow both to appear, unlike several other Fortran compilers. This is especially desirable when two generics of the same name are combined due to USE association and the mixture may be inadvertent. * Since Fortran 90, `INCLUDE` lines have been allowed to have a numeric kind parameter prefix on the file name. No other Fortran compiler supports them that I can find. * A `SEQUENCE` derived type is required (F'2023 C745) to have at least one component. No compiler enforces this constraint; this compiler emits a warning. * Many compilers disallow a `VALUE` assumed-length character dummy argument, which has been standard since F'2008. We accept this usage with an optional portability warning. ## Behavior in cases where the standard is ambiguous or indefinite * When an inner procedure of a subprogram uses the value or an attribute of an undeclared name in a specification expression and that name does not appear in the host, it is not clear in the standard whether that name is an implicitly typed local variable of the inner procedure or a host association with an implicitly typed local variable of the host. For example: ``` module module contains subroutine host(j) ! Although "m" never appears in the specification or executable ! parts of this subroutine, both of its contained subroutines ! might be accessing it via host association. integer, intent(in out) :: j call inner1(j) call inner2(j) contains subroutine inner1(n) integer(kind(m)), intent(in) :: n m = n + 1 end subroutine subroutine inner2(n) integer(kind(m)), intent(out) :: n n = m + 2 end subroutine end subroutine end module program demo use module integer :: k k = 0 call host(k) print *, k, " should be 3" end ``` Other Fortran compilers disagree in their interpretations of this example; some seem to treat the references to `m` as if they were host associations to an implicitly typed variable (and print `3`), while others seem to treat them as references to implicitly typed local variables, and load uninitialized values. In f18, we chose to emit an error message for this case since the standard is unclear, the usage is not portable, and the issue can be easily resolved by adding a declaration. * In subclause 7.5.6.2 of Fortran 2018 the standard defines a partial ordering of the final subroutine calls for finalizable objects, their non-parent components, and then their parent components. (The object is finalized, then the non-parent components of each element, and then the parent component.) Some have argued that the standard permits an implementation to finalize the parent component before finalizing an allocatable component in the context of deallocation, and the next revision of the language may codify this option. In the interest of avoiding needless confusion, this compiler implements what we believe to be the least surprising order of finalization. Specifically: all non-parent components are finalized before the parent, allocatable or not; all finalization takes place before any deallocation; and no object or subobject will be finalized more than once. * When `RECL=` is set via the `OPEN` statement for a sequential formatted input file, it functions as an effective maximum record length. Longer records, if any, will appear as if they had been truncated to the value of `RECL=`. (Other compilers ignore `RECL=`, signal an error, or apply effective truncation to some forms of input in this situation.) For sequential formatted output, RECL= serves as a limit on record lengths that raises an error when it is exceeded. * When a `DATA` statement in a `BLOCK` construct could be construed as either initializing a host-associated object or declaring a new local initialized object, f18 interprets the standard's classification of a `DATA` statement as being a "declaration" rather than a "specification" construct, and notes that the `BLOCK` construct is defined as localizing names that have specifications in the `BLOCK` construct. So this example will elicit an error about multiple initialization: ``` subroutine subr integer n = 1 block data n/2/ end block end subroutine ``` Other Fortran compilers disagree with each other in their interpretations of this example. The precedent among the most commonly used compilers agrees with f18's interpretation: a `DATA` statement without any other specification of the name refers to the host-associated object. * Many Fortran compilers allow a non-generic procedure to be `USE`-associated into a scope that also contains a generic interface of the same name but does not have the `USE`-associated non-generic procedure as a specific procedure. ``` module m1 contains subroutine foo(n) integer, intent(in) :: n end subroutine end module module m2 use m1, only: foo interface foo module procedure noargs end interface contains subroutine noargs end subroutine end module ``` This case elicits a warning from f18, as it should not be treated any differently than the same case with the non-generic procedure of the same name being defined in the same scope rather than being `USE`-associated into it, which is explicitly non-conforming in the standard and not allowed by most other compilers. If the `USE`-associated entity of the same name is not a procedure, most compilers disallow it as well. * Fortran 2018 19.3.4p1: "A component name has the scope of its derived-type definition. Outside the type definition, it may also appear ..." which seems to imply that within its derived-type definition, a component name is in its scope, and at least shadows any entity of the same name in the enclosing scope and might be read, thanks to the "also", to mean that a "bare" reference to the name could be used in a specification inquiry. However, most other compilers do not allow a component to shadow exterior symbols, much less appear in specification inquiries, and there are application codes that expect exterior symbols whose names match components to be visible in a derived-type definition's default initialization expressions, and so f18 follows that precedent. * 19.3.1p1 "Within its scope, a local identifier of an entity of class (1) or class (4) shall not be the same as a global identifier used in that scope..." is read so as to allow the name of a module, submodule, main program, or `BLOCK DATA` subprogram to also be the name of an local entity in its scope, with a portability warning, since that global name is not actually capable of being "used" in its scope. * In the definition of the `ASSOCIATED` intrinsic function (16.9.16), its optional second argument `TARGET=` is required to be "allowable as the data-target or proc-target in a pointer assignment statement (10.2.2) in which POINTER is data-pointer-object or proc-pointer-object." Some Fortran compilers interpret this to require that the first argument (`POINTER=`) be a valid left-hand side for a pointer assignment statement -- in particular, it cannot be `NULL()`, but also it is required to be modifiable. As there is no good reason to disallow (say) an `INTENT(IN)` pointer here, or even `NULL()` as a well-defined case that is always `.FALSE.`, this compiler doesn't require the `POINTER=` argument to be a valid left-hand side for a pointer assignment statement, and we emit a portability warning when it is not. * F18 allows a `USE` statement to reference a module that is defined later in the same compilation unit, so long as mutual dependencies do not form a cycle. This feature forestalls any risk of such a `USE` statement reading an obsolete module file from a previous compilation and then overwriting that file later. * F18 allows `OPTIONAL` dummy arguments to interoperable procedures unless they are `VALUE` (C865). * F18 processes the `NAMELIST` group declarations in a scope after it has resolved all of the names in that scope. This means that names that appear before their local declarations do not resolve to host associated objects and do not elicit errors about improper redeclarations of implicitly typed entities. * Standard Fortran allows forward references to derived types, which can lead to ambiguity when combined with host association. Some Fortran compilers resolve the type name to the host type, others to the forward-referenced local type; this compiler diagnoses an error. ``` module m type ambiguous; integer n; end type contains subroutine s type(ambiguous), pointer :: ptr type ambiguous; real a; end type end end ``` * When an intrinsic procedure appears in the specification part of a module only in function references, but not an explicit `INTRINSIC` statement, its name is not brought into other scopes by a `USE` statement. * The subclause on rounding in formatted I/O (13.7.2.3.8 in F'2023) only discusses rounding for decimal-to/from-binary conversions, omitting any mention of rounding for hexadecimal conversions. As other compilers do apply rounding, so does this one. * For real `MAXVAL`, `MINVAL`, `MAXLOC`, and `MINLOC`, NaN values are essentially ignored unless there are some unmasked array entries and *all* of them are NaNs. ## De Facto Standard Features * `EXTENDS_TYPE_OF()` returns `.TRUE.` if both of its arguments have the same type, a case that is technically implementation-defined. * `ENCODING=` is not in the list of changeable modes on an I/O unit, but every Fortran compiler allows the encoding to be changed on an open unit. * A `NAMELIST` input item that references a scalar element of a vector or contiguous array can be used as the initial element of a storage sequence. For example, "&GRP A(1)=1. 2. 3./" is treated as if had been "&GRP A(1:)=1. 2. 3./".