Age | Commit message (Collapse) | Author | Files | Lines |
|
values/dims
`ValueBoundsConstraintSet` maintains an internal constraint set (`IntegerRelation`), where every analyzed index-typed SSA value or dimension of a shaped type is represented with a dimension/symbol. Prior to this change, index-typed values with a statically known constant value and static shaped type dimensions were not added to the constraint set. Instead, `getExpr` directly returned an affine constrant expression.
With this commit, dynamic and static values/dimension sizes are treated in the same way: in either case, a dimension/symbol is added to the constraint set. This is needed for a subsequent commit that adds support for branches.
|
|
the constructor (#86099)
This commit changes the API of `ValueBoundsConstraintSet`: the stop
condition is now passed to the constructor instead of `processWorklist`.
That makes it easier to add items to the worklist multiple times and
process them in a consistent manner. The current
`ValueBoundsConstraintSet` is passed as a reference to the stop
function, so that the stop function can be defined before the the
`ValueBoundsConstraintSet` is constructed.
This change is in preparation of adding support for branches.
|
|
|
|
|
|
There is an assertion that the stop condition is not satisfied for the
the starting point at the beginning of `computeBound`. Therefore, that
case does not have to be handled later on in that function.
|
|
SLES 15 comes with a GCC 7.5 as default, which does not support the
C++17 `<charconv>` header. This results in build errors when trying to
run `check-flang`.
This patch addresses that and uses the older `std::stol` for the string
-> number conversion to allow the SLES 15 buildbot
(https://lab.llvm.org/staging/#/builders/193) to turn green.
|
|
(#87504)
This commit relaxes Mem2Reg's type equality requirement for the LLVM
dialect's load and store operations. For now, we only allow loads to be
promoted if the reaching definition can be casted into a value of the
target type.
For stores, all type checks are removed, as a non-volatile store that
does not write out the alloca's pointer can always be deleted.
|
|
This adds handling of range attribute for return values of Call and
Invoke in getFromRangeMetadata and handling of argument with range
attribute in solveBlockValueNonLocal.
There is one additional check of the range metadata at line 1120 in
getValueFromSimpleICmpCondition that is not covered in this PR as after
https://github.com/llvm/llvm-project/pull/75311 there is no test that
cover that check any more and I have not been able to create a test that
trigger that code.
|
|
`GNU_PROPERTY_AARCH64_FEATURE_PAUTH` (#87545)
Reland #85231 after fixing build failure
https://lab.llvm.org/buildbot/#/builders/186/builds/15631.
Use `PRIx64` for format output of `uint64_t` as hex.
Original PR description below.
This adds support for `GNU_PROPERTY_AARCH64_FEATURE_PAUTH` feature (as
defined in https://github.com/ARM-software/abi-aa/pull/240) handling in
llvm-readobj and llvm-readelf. The following constants for supported
platforms are also introduced:
- `AARCH64_PAUTH_PLATFORM_INVALID = 0x0`
- `AARCH64_PAUTH_PLATFORM_BAREMETAL = 0x1`
- `AARCH64_PAUTH_PLATFORM_LLVM_LINUX = 0x10000002`
For the llvm_linux platform, output of the tools contains descriptions
of PAuth features which are enabled/disabled depending on the version
value. Version value bits correspond to the following `LangOptions`
defined in #85232:
- bit 0: `PointerAuthIntrinsics`;
- bit 1: `PointerAuthCalls`;
- bit 2: `PointerAuthReturns`;
- bit 3: `PointerAuthAuthTraps`;
- bit 4: `PointerAuthVTPtrAddressDiscrimination`;
- bit 5: `PointerAuthVTPtrTypeDiscrimination`;
- bit 6: `PointerAuthInitFini`.
Support for `.note.AARCH64-PAUTH-ABI-tag` is dropped since it's deleted
from the spec in ARM-software/abi-aa#250.
|
|
I'm currently developing a new version of the indexed memprof format
where we deduplicate call stacks in IndexedAllocationInfo::CallStack
and IndexedMemProfRecord::CallSites. We refer to call stacks with
integer IDs, namely CallStackId, just as we refer to Frame with
FrameId. The deduplication will cut down the profile file size by 80%
in a large memprof file of mine.
As a step toward the goal, this patch teaches
IndexedMemProfRecord::{serialize,deserialize} to speak Version2. A
subsequent patch will add Version2 support to llvm-profdata.
The essense of the patch is to replace the serialization of a call
stack, a vector of FrameIDs, with that of a CallStackId. That is:
const IndexedAllocationInfo &N = ...;
...
LE.write<uint64_t>(N.CallStack.size());
for (const FrameId &Id : N.CallStack)
LE.write<FrameId>(Id);
becomes:
LE.write<CallStackId>(N.CSId);
|
|
On RV64, we legalize zexts of i1s to (vselect m, (splat_vector i64 1),
(splat_vector i64 0)), where the splat_vectors are implicitly
truncating.
When the vselect is used by a binop we want to pull the vselect out via
foldSelectWithIdentityConstant. But because vectors with an element size
< i64 will truncate, isNeutralConstant will return false.
This patch handles truncating splats by getting the APInt value and
truncating it. We almost don't need to do this since most of the neutral
elements are either one/zero/all ones, but it will make a difference for
smax and smin.
I wasn't able to figure out a way to write the tests in terms of select,
since we need the i1 zext legalization to create a truncating
splat_vector.
This supercedes #87236. Fixed vectors are unfortunately not handled by
this patch (since they get legalized to _VL nodes), but they don't seem
to appear in the wild.
|
|
This reverts commit 3ee93f486293420852fb9ec95af9c5f54cecdb08
because it broke Fuchsia Clang toolchain builders:
https://logs.chromium.org/logs/fuchsia/buildbucket/cr-buildbucket/8751633430491432833/+/u/clang/build/stdout
|
|
|
|
Fixed vectors have their sext/zext operands legalized to _VL nodes, so
we need to handle them in the patterns.
This adds a riscv_ext_vl_oneuse pattern since we don't care about the
type of extension used for the shift amount, and extends
Low8BitsSplatPat to handle other _VL nodes. We don't actually need to
check the mask or VL there since none of the _VL nodes have passthru
operands.
The remaining test cases that are widening from i8->i64 need to be
handled by extending combineBinOp_VLToVWBinOp_VL.
This also fixes Low8BitsSplatPat incorrectly checking the vector size
instead of the element size to determine if the splat value might have
been truncated below 8 bits.
|
|
Implements: https://wg21.link/P2867R2
---------
Co-authored-by: Hristo Hristov <zingam@outlook.com>
|
|
Operations must be created with the supplied builder. Otherwise, the
dialect conversion / greedy pattern rewrite driver can break.
This commit fixes a crash in the dialect conversion:
```
within split at llvm-project/mlir/test/Conversion/TosaToLinalg/tosa-to-linalg-invalid.mlir:1 offset :8:8: error: failed to legalize operation 'tosa.add'
%0 = tosa.add %1, %arg2 : (tensor<10x10xf32>, tensor<*xf32>) -> tensor<*xf32>
^
within split at llvm-project/mlir/test/Conversion/TosaToLinalg/tosa-to-linalg-invalid.mlir:1 offset :8:8: note: see current operation: %9 = "tosa.add"(%8, %arg2) : (tensor<10x10xf32>, tensor<*xf32>) -> tensor<*xf32>
mlir-opt: llvm-project/mlir/include/mlir/IR/UseDefLists.h:198: mlir::IRObjectWithUseList<mlir::OpOperand>::~IRObjectWithUseList() [OperandType = mlir::OpOperand]: Assertion `use_empty() && "Cannot destroy a value that still has uses!"' failed.
```
This commit is the proper fix for #87297 (which was reverted).
|
|
vector. NFC
If the type is vector, we can immediately know to use vector mapping.
Previously we searched for FP uses, but then replaced it if the type
was vector.
|
|
- When both operands are constant, the matcher runs into an infinite
loop as the commutation should be applied only when LHS is a constant
and RHS is not.
Reviewers: arsenm
Reviewed By: arsenm
Pull Request: https://github.com/llvm/llvm-project/pull/87426
|
|
|
|
Use the return type to measure the LMUL size for latency/throughput cost
|
|
RISCVRegisterBankInfo::getInstrMapping.
This removes the special case for vectors. The default case in the
second switch can handle GPR in addition to vectors. We just won't
use the static ValueMapping entry.
|
|
|
|
This is a followup to
https://github.com/llvm/llvm-project/pull/86359
"[lldb] [ObjectFileMachO] LLVM_COV is not mapped into firmware memory
(#86359)"
where I treat LLVM_COV segments in a Mach-O binary as non-loadable.
There is another codepath in
`DynamicLoaderStatic::LoadAllImagesAtFileAddresses` which is called to
set the load addresses for a Module to the file addresses. It has no
logic to detect a segment that is not loaded in virtual memory
(ObjectFileMachO::SectionIsLoadable), so it would set the load address
for this LLVM_COV segment to the file address and shadow actual code,
breaking lldb behavior.
This method currently sets the load address for any section that doesn't
have a load address set already. This presumes that a Module was added
to the Target, some mechanism set the correct load address for SOME
segments, and then this method is going to set the other segments to a
no-slide value, assuming they were forgotten.
ObjectFile base class doesn't, today, vend a SectionIsLoadable method,
but we do have ObjectFile::SetLoadAddress and at a higher level,
Module::SetLoadAddress, when we're setting the same slide to all
segments.
That's the behavior we want in this method. If any section has a load
address, we don't touch this Module. Otherwise we set all sections to
have a load address that is the same as the file address.
I also audited the other parts of lldb that are calling
SectionList::SectionLoadAddress and looked if they should be more
correctly using Module::SetLoadAddress for the entire binary. But in
most cases, we have the potential for different slides for different
sections so this section-by-section approach must be taken.
rdar://125800290
|
|
DeclRef to field must be marked as LValue to be consistent with how the
field decl will be evaluated.
T->desugar() is unnecessary to call ->isArrayType().
|
|
Reverts llvm/llvm-project#86812.
This commit caused a regression on the x86_64 MacOS buildbot:
https://green.lab.llvm.org/job/llvm.org/view/LLDB/job/lldb-cmake/784/
|
|
(#87582)
Previously the leading space was added in each string constant. This
patch moves the leading space out of the string constants and is instead
explicitly added to add clarity to the code.
|
|
solely on leading unit dims. (#85694)
Updates `castAwayContractionLeadingOneDim` to check for leading unit
dimensions before inserting `vector.transpose` ops.
Currently `castAwayContractionLeadingOneDim` removes all leading unit
dims based on the accumulator and transpose any subsequent operands to
match the accumulator indexing. This does not take into account if the
transpose is strictly necessary, for instance when given this
vector-matrix contract:
```mlir
%result = vector.contract {indexing_maps = [affine_map<(d0, d1, d2, d3) -> (d0, d1, d3)>, affine_map<(d0, d1, d2, d3) -> (d0, d2, d3)>, affine_map<(d0, d1, d2, d3) -> (d1, d2)>], iterator_types = ["parallel", "parallel", "parallel", "reduction"], kind = #vector.kind<add>} %lhs, %rhs, %acc : vector<1x1x8xi32>, vector<1x8x8xi32> into vector<1x8xi32>
```
Passing this through `castAwayContractionLeadingOneDim` pattern produces
the following:
```mlir
%0 = vector.transpose %arg0, [1, 0, 2] : vector<1x1x8xi32> to vector<1x1x8xi32>
%1 = vector.extract %0[0] : vector<1x8xi32> from vector<1x1x8xi32>
%2 = vector.extract %arg2[0] : vector<8xi32> from vector<1x8xi32>
%3 = vector.contract {indexing_maps = [affine_map<(d0, d1, d2) -> (d0, d2)>, affine_map<(d0, d1, d2) -> (d0, d1, d2)>, affine_map<(d0, d1, d2) -> (d1)>], iterator_types = ["parallel", "parallel", "reduction"], kind = #vector.kind<add>} %1, %arg1, %2 : vector<1x8xi32>, vector<1x8x8xi32> into vector<8xi32>
%4 = vector.broadcast %3 : vector<8xi32> to vector<1x8xi32>
```
The `vector.transpose` introduced does not affect the underlying data
layout (effectively a no op), but it cannot be folded automatically.
This change avoids inserting transposes when only leading unit
dimensions are involved.
Fixes #85691
|
|
patterns (#86005)
Updates smmla unrolling patterns to handle vecmat contracts where `dimM=1`. This includes explicit vecmats in the form: `<1x8xi8> x <8x8xi8> --> <1x8xi32>` or implied with the leading dim folded: `<8xi8> x <8x8xi8> --> <8xi32>`
Since the smmla operates on two `<2x8xi8>` input vectors to produce `<2x2xi8>` accumulators, half of each 2x2 accumulator tile is dummy data not pertinent to the computation, resulting in half throughput.
|
|
This reverts commit 23616c65e7d632e750ddb67d55cc39098a69a8a6
because it breaks Fuchsia Clang toolchain builders.
https://luci-milo.appspot.com/ui/p/fuchsia/builders/toolchain.ci/clang-linux-x64/b8751656876289840849/overview
|
|
scalable vector type
|
|
vector type
|
|
|
|
|
|
G_ICMP for scalable vector types
This patch legalizes G_ZEXT, G_SEXT, and G_ANYEXT. If the type is a
legal mask type, then the instruction is legalized as the element-wise
select, where the condition on the select is the mask typed source
operand, and the true and false values are 1 or -1 (for
zero/any-extension and sign extension) and zero. If the type is a legal integer
or vector integer type, then the instruction is marked as legal.
The legalization of the extends may introduce a G_SPLAT_VECTOR, which
needs to be legalized in this patch for the extend test cases to pass.
A G_SPLAT_VECTOR is legal if the vector type is a legal integer or
floating point vector type and the source operand is sXLen type. This is
because the SelectionDAG patterns only support sXLen typed
ISD::SPLAT_VECTORS, and we'd like to reuse those patterns. A
G_SPLAT_VECTOR is cutom legalized if it has a legal s1 element vector
type and s1 scalar operand. It is legalized to G_VMSET_VL or G_VMCLR_VL
if the splat is all ones or all zeros respectivley. In the case of a
non-constant mask splat, we legalize by promoting the scalar value to
s8.
In order to get the s8 element vector back into s1 vector, we use a
G_ICMP. In order for the splat vector and extend tests to pass, we also
need to legalize G_ICMP in this patch.
A G_ICMP is legal if the destination type is a legal bool vector and the LHS and
RHS are legal integer vector types.
|
|
bitfields""" (#87562)
Reverts llvm/llvm-project#87529
Reverts #87518
https://lab.llvm.org/buildbot/#/builders/37/builds/33262 is still broken
|
|
`atomic_compare_exchange_{weak,strong}` (#87135)
Spotted this minor mistake in the tests as I was looking into testing
more thoroughly `atomic_ref`.
The two argument overloads are tested just above. The names of the
lambda clearly indicates that the intent was to test the one argument
overload.
|
|
|
|
costs for testing
Improves SSE vs AVX test results for #87510
|
|
Compiler can improve analysis for operands of UIToFP/SIToFP instructions
and operands of ICmp instruction.
Reviewers: RKSimon
Reviewed By: RKSimon
Pull Request: https://github.com/llvm/llvm-project/pull/85966
|
|
Adding OffTType to fcntl.h and stdio.h 's Macro lists in libc/spec/posix.td as
mentioned here: #87266
|
|
Some TUs apparently end up with an ambiguity between `::llvm::detail`
and `support::detail`, so we close that gap at the source.
|
|
instructions."
This reverts commit 899855d2b11856a44e530fffe854d76be69b9008 to fix the
issue reported in https://lab.llvm.org/buildbot/#/builders/165/builds/51659.
|
|
Compiler can improve analysis for operands of UIToFP/SIToFP instructions
and operands of ICmp instruction.
Reviewers: RKSimon
Reviewed By: RKSimon
Pull Request: https://github.com/llvm/llvm-project/pull/85966
|
|
|
|
The previous diff (and it's subsequent fix) were reverted as the tests
didn't work properly on the AArch64 & ARM LLDB buildbots. I made a
couple more minor changes to tests (from @clayborg's feedback) and
disabled them for non Linux-x86(_64) builds, as I don't have the ability
do anything about an ARM64 Linux failure. If I had to guess, I'd say the
toolchain on the buildbots isn't respecting the `-Wl,--build-id` flag.
Maybe, one day, when I have a Linux AArch64 system I'll dig in to it.
From the reverted PR:
I've migrated the tests in my
https://github.com/llvm/llvm-project/pull/79181 from shell to API (at
@JDevlieghere's suggestion) and addressed a couple issues that were
exposed during testing.
The tests first test the "normal" situation (no DebugInfoD involvement,
just normal debug files sitting around), then the "no debug info"
situation (to make sure the test is seeing failure properly), then it
tests to validate that when DebugInfoD returns the symbols, things work
properly. This is duplicated for DWP/split-dwarf scenarios.
---------
Co-authored-by: Kevin Frei <freik@meta.com>
|
|
Allows src1 of VOP3 encoded VOPC to be an SGPR or inline immediate on
GFX1150Plus
The w32 and w64 _e64_dpp assembler only real instructions were unused,
and erroneously constructed in a way that bugged parsing of the new
instructions. They are removed.
This patch is a follow up to PR
https://github.com/llvm/llvm-project/pull/87382
|
|
We should consistently use PseudoInstr instead of Mnemonic to name
SIMCInstr, even though they may be the same in most cases
|
|
|
|
Add zext nneg tests and check we don't fold casts with different src types
|
|
Implemented long-standing TODO to support commutative intrinsics.
Reviewers: RKSimon
Reviewed By: RKSimon
Pull Request: https://github.com/llvm/llvm-project/pull/86316
|