From 10dc2a90b7f86d9bc1be9d1b9305a781882f7ac5 Mon Sep 17 00:00:00 2001 From: Ulrich Drepper Date: Wed, 18 Dec 1996 03:23:47 +0000 Subject: update from main archive 961217 Wed Dec 18 03:31:58 1996 Ulrich Drepper * dirent/scandir.c: Undo change from Mon Dec 2 15:32:15 1996. The stream is private and usages outside glibc don't care about reentrancy. * io/fts.c: Likewise. * io/ftw.c: Likewise. * sysdeps/posix/getcwd.c: Likewise. * sysdeps/posix/ttyname.c: Likewise. * sysdeps/posix/ttyname_r.c: Likewise. * sysdeps/posix/glob.c: Likewise. * libio/iovsprintf.c: Add cast to prevent warning. * libio/iovsscanf.c: Likewise. * libio/libioP.h: Define mmap to __mmap and munmap to __munmap to keep namespace clean. * new-malloc/malloc.c: Update to last version from Wolfram Gloger. Add hooks and check functions from old GNU malloc. * new-malloc/malloc.h: Likewise. * nis/ypclnt.c: Remove prototype for xdr_free. * snrpc/rpc/xdr.h: Add prototype for xdr_free. * manual/nss.texi: Correct description of default values and don't meantion NSS as an add-on. * nss/grp-lookup.c: Provide default value as "compat [NOTFOUND=return] files". * nss/pwd-lookup.c: Likewise. * nss/spwd-lookup.c: Likewise. * nss/network-lookup.c: Correct default to "dns [!UNAVAIL=return] files". * nss/nsswitch.c: Change default-default value to "nis [NOTFOUND=return] files" since compat is only available for group, passwd, and shadow. * stdlib/on_exit.c (on_exit): Rename to __on_exit and make old name a weak alias. * stdlib/stdlib.h: Add prototype for __on_exit. * sysdeps/unix/sysv/linux/schedbits.h: Add prototype for __clone. * time/Makefile: Undo change from Sun Dec 8 06:56:49 1996. The new malloc now has mcheck. * time/ap.c: Likewise. * time/tzset.c (__tzset): Rename to __tzset_internal. (tzset): Rename to __tzset. Make tzset a weak alias for __tzset. * time/localtime.c: Use __tzset_internal not __tzset. * time/strftime.c [_LIBC]: Define tzname as __tzname and tzset as __tzset to prevent namespace pollution. * wctype/iswctype.h (icwctype): Rename to __iswctype. Make iswctype a weak alias of __iswctype. * wctype/wctype.h: Add prototype for __iswctype. (iswalnum, iswalpha, iswcntrl, iswdigit, iswlower, iswgraph, iswprint, iswpunct, iswspace, iswupper, iswxdigit, iswblank): Use __iswctype for the test, not iswctype. 1996-12-16 Paul Eggert * hurd/hurd/sigpreempt.h (struct hurd_signal_preemptor.preemptor, _hurdsig_preemptors), hurd/hurd/signal.h (struct hurd_sigstate.preemptors), hurd/hurdfault.c, hurd/hurdfault.h (_hurdsig_fault_preemptor), hurd/hurdsig.c (_hurdsig_preempters): Renamed to fix spelling from `preempter' to `preemptor'. All uses changed. 1996-12-15 Paul Eggert * ctime.c (ctime): Return asctime (localtime (t)), as the C standard requires. Tue Dec 17 02:05:48 1996 Thomas Bushnell, n/BSG * sysdeps/mach/libc-lock.h (__libc_lock_trylock): Invert return value because Mach/cthreads uses the opposite convention from Posix/glibc. Mon Dec 16 22:41:01 1996 Ulrich Drepper * stdio-common/fcloseall.c: Correct test of already_called. Reported by Thomas Bushnell, n/BSG. Mon Dec 16 14:52:07 1996 Thomas Bushnell, n/BSG * mach/lock-intern.h (__mutex_try_lock): New function. Sun Dec 15 16:33:44 1996 Andreas Schwab * termios/sys/ttydefaults.h (TTYDEF_OFLAG): Only use OXTABS if defined, else XTABS. (CEOL, CSTATUS): Use _POSIX_VDISABLE if defined. Sun Dec 15 11:56:19 1996 Andreas Schwab * sysdeps/unix/sysv/linux/m68k/mremap.S: New file. * sysdeps/unix/sysv/linux/m68k/Dist: Distribute it. * sysdeps/unix/sysv/linux/m68k/Makefile (sysdep_routines): Add mremap. --- manual/texinfo.tex | 64 +++++++++++++++++++++++++++--------------------------- 1 file changed, 32 insertions(+), 32 deletions(-) (limited to 'manual/texinfo.tex') diff --git a/manual/texinfo.tex b/manual/texinfo.tex index c79e160..c1a911a 100644 --- a/manual/texinfo.tex +++ b/manual/texinfo.tex @@ -1,5 +1,5 @@ %% TeX macros to handle Texinfo files. -%% $Id: texinfo.tex,v 2.194 1996/12/17 06:25:17 eggert Exp $ +%% $Id: texinfo.tex,v 2.195 1996/12/18 03:22:53 drepper Exp $ % Copyright (C) 1985, 86, 88, 90, 91, 92, 93, % 94, 95, 1996 Free Software Foundation, Inc. @@ -36,7 +36,7 @@ % This automatically updates the version number based on RCS. \def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}} -\deftexinfoversion$Revision: 2.194 $ +\deftexinfoversion$Revision: 2.195 $ \message{Loading texinfo package [Version \texinfoversion]:} % If in a .fmt file, print the version number @@ -105,8 +105,8 @@ \hyphenation{eshell} % Margin to add to right of even pages, to left of odd pages. -\newdimen \bindingoffset -\newdimen \normaloffset +\newdimen \bindingoffset +\newdimen \normaloffset \newdimen\pagewidth \newdimen\pageheight % Sometimes it is convenient to have everything in the transcript file @@ -1349,7 +1349,7 @@ where each line of input produces a line of output.} % Computer Modern typewriter fonts have zero interword stretch (and % shrink), and it is reasonable to expect all typewriter fonts to have % this property, we can check that font parameter. -% +% \def\ifmonospace{\ifdim\fontdimen3\font=0pt } % Typeset a dimension, e.g., `in' or `pt'. The only reason for the @@ -1910,7 +1910,7 @@ July\or August\or September\or October\or November\or December\fi % To make preamble: % -% Either define widths of columns in terms of percent of \hsize: +% Either define widths of columns in terms of percent of \hsize: % @multitable @columnfractions .25 .3 .45 % @item ... % @@ -1928,13 +1928,13 @@ July\or August\or September\or October\or November\or December\fi % the preamble, break the line within one argument and it % will parse correctly, i.e., % -% @multitable {Column 1 template} {Column 2 template} {Column 3 +% @multitable {Column 1 template} {Column 2 template} {Column 3 % template} % Not: -% @multitable {Column 1 template} {Column 2 template} +% @multitable {Column 1 template} {Column 2 template} % {Column 3 template} -% Each new table line starts with @item, each subsequent new column +% Each new table line starts with @item, each subsequent new column % starts with @tab. Empty columns may be produced by supplying @tab's % with nothing between them for as many times as empty columns are needed, % ie, @tab@tab@tab will produce two empty columns. @@ -1946,15 +1946,15 @@ July\or August\or September\or October\or November\or December\fi % @multitable {Column 1 template} {Column 2 template} {Column 3 template} % @item first col stuff @tab second col stuff @tab third col -% @item -% first col stuff -% @tab -% second col stuff -% @tab -% third col -% @item first col stuff @tab second col stuff +% @item +% first col stuff +% @tab +% second col stuff +% @tab +% third col +% @item first col stuff @tab second col stuff % @tab Many paragraphs of text may be used in any column. -% +% % They will wrap at the width determined by the template. % @item@tab@tab This will be in third column. % @end multitable @@ -1968,7 +1968,7 @@ July\or August\or September\or October\or November\or December\fi % 0pt means it depends on current normal line spacing. %%%% -% Dimensions +% Dimensions \newskip\multitableparskip \newskip\multitableparindent @@ -2038,18 +2038,18 @@ July\or August\or September\or October\or November\or December\fi % To parse everything between @multitable and @item : \setuptable#1 \endsetuptable % Need to reset this to 0 after \setuptable. -\global\colcount=0\relax% +\global\colcount=0\relax% % % This preamble sets up a generic column definition, which will % be used as many times as user calls for columns. - % \vtop will set a single line and will also let text wrap and + % \vtop will set a single line and will also let text wrap and % continue for many paragraphs if desired. \halign\bgroup&\global\advance\colcount by 1\relax% \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname % In order to keep entries from bumping into each other % we will add a \leftskip of \multitablecolspace to all columns after % the first one. - % If a template has been used, we will add \multitablecolspace + % If a template has been used, we will add \multitablecolspace % to the width of each template entry. % If user has set preamble in terms of percent of \hsize % we will use that dimension as the width of the column, and @@ -2061,7 +2061,7 @@ July\or August\or September\or October\or November\or December\fi \ifsetpercent \else % If user has set preamble in terms of percent of \hsize - % we will advance \hsize by \multitablecolspace + % we will advance \hsize by \multitablecolspace \advance\hsize by \multitablecolspace \fi % In either case we will make \leftskip=\multitablecolspace: @@ -2097,7 +2097,7 @@ July\or August\or September\or October\or November\or December\fi %% to keep lines equally spaced \let\multistrut = \strut %% Test to see if parskip is larger than space between lines of -%% table. If not, do nothing. +%% table. If not, do nothing. %% If so, set to same dimension as multitablelinespace. \else \gdef\multistrut{\vrule height\multitablelinespace depth\dp0 @@ -2613,7 +2613,7 @@ width0pt\relax} \fi \endgroup % Back to normal single-column typesetting, but take account of the % fact that we just accumulated some stuff on the output page. - \pagegoal=\vsize + \pagegoal=\vsize } \def\balancecolumns{% % Called on the last page of the double column material. @@ -3139,7 +3139,7 @@ width0pt\relax} \fi % Print any size section title. -% +% % #1 is the section type (sec/subsec/subsubsec), #2 is the section % number (maybe empty), #3 the text. \def\sectionheading#1#2#3{% @@ -3772,7 +3772,7 @@ width0pt\relax} \fi % This is used for \def{tp,vr}parsebody. It could probably be used for % some of the others, too, with some judicious conditionals. -% +% \def\parsebodycommon#1#2#3{% \begingroup\inENV % \medbreak % @@ -3807,13 +3807,13 @@ width0pt\relax} \fi % Fine, but then we have to eventually remove the \empty *and* the % braces (if any). That's what this does. -% +% \def\removeemptybraces\empty#1\relax{#1} % After \spacesplit has done its work, this is called -- #1 is the final % thing to call, #2 the type name (which starts with \empty), and #3 % (which might be empty) the arguments. -% +% \def\parsetpheaderline#1#2#3{% #1{\removeemptybraces#2\relax}{#3}% }% @@ -4186,7 +4186,7 @@ width0pt\relax} \fi % Use \turnoffactive so that punctuation chars such as underscore % work in node names. -\def\dosetq #1#2{{\let\folio=0 \turnoffactive +\def\dosetq #1#2{{\let\folio=0 \turnoffactive \edef\next{\write\auxfile{\internalsetq {#1}{#2}}}% \next}} @@ -4302,11 +4302,11 @@ width0pt\relax} \fi % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first % argument, and \hat is not an expandable control sequence. It could % all be worked out, but why? Either we support ^^ or we don't. - % + % % The other change necessary for this was to define \auxhat: % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter % and then to call \auxhat in \setq. - % + % \catcode`\~=\other \catcode`\[=\other \catcode`\]=\other @@ -4389,7 +4389,7 @@ width0pt\relax} \fi % Don't bother with the trickery in plain.tex to not require the % footnote text as a parameter. Our footnotes don't need to be so general. -% +% % Oh yes, they do; otherwise, @ifset and anything else that uses % \parseargline fail inside footnotes because the tokens are fixed when % the footnote is read. --karl, 16nov96. -- cgit v1.1