aboutsummaryrefslogtreecommitdiff
path: root/timezone
AgeCommit message (Collapse)AuthorFilesLines
2014-09-30Allow cross-building of testsWill Newton1-0/+2
Allow building tests in a cross configuration without a test wrapper defined. This is helpful for doing simple build testing of tests. ChangeLog: 2014-09-30 Will Newton <will.newton@linaro.org> * localedata/Makefile: Move assignment to tests-special into an ifdef testing run-built-tests. * timezone/Makefile: Likewise.
2014-08-21Remove redundant CPPFLAGS for some programsSiddhesh Poyarekar1-2/+0
These programs get the NOT_IN_libc twice, once through the 'other' target and another explicitly. Remove the explicitly added CPFLAG. * catgets/Makefile (CPPFLAGS-gencat): Remove. * iconv/Makefile (CPPFLAGS-iconv_prog): Likewise. (CPPFLAGS-iconvconfig): Likewise. * timezone/Makefile (CPPFLAGS-zic): Likewise.
2014-06-25Update timezone code from tzcode 2014e.Joseph Myers5-84/+139
This patch updates the timezone code from tzcode 2014e (the previous version used was 2013i). Tested x86_64. * timezone/checktab.awk: Update from tzcode 2014e. * timezone/private.h: Likewise. * timezone/tzfile.h: Likewise. * timezone/zdump.c: Likewise. * timezone/zic.c: Likewise.
2014-06-07Remove redundant C locale settings.Joseph Myers1-2/+1
Various glibc build / install / test code has C locale settings that are redundant with LC_ALL=C. LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C (explicitly, or through it being in the default environment for running tests) does not need to set LANG=C. LC_ALL=C also takes precedence over LANGUAGE, since 2001-01-02 Ulrich Drepper <drepper@redhat.com> * intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE value is ignored if the selected locale is the C locale. * intl/tst-gettext.c: Set locale for above change. * intl/tst-translit.c: Likewise. and so settings of LANGUAGE=C are also redundant when LC_ALL=C is set. One test also had LC_ALL=C in its -ENV setting, although it's part of the default environment used for tests. This patch removes the redundant settings. It removes a suggestion in install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the Makefile.in target "install" already sets LC_ALL_C so there's no need for the user to set it (and nor should there be any need for the user to set it). If some build machine tool used by "make install" uses a version of libintl predating that 2001 change, and the user has LANGUAGE set, the removal of LANGUAGE=C from the Makefile.in "install" rule could in principle affect the user's installation. However, I don't think we need to be concerned about pre-2001 build tools. Tested x86_64. * Makefile (install): Don't set LANGUAGE. * Makefile.in (install): Likewise. * assert/Makefile (test-assert-ENV): Remove variable. (test-assert-perr-ENV): Likewise. * elf/Makefile (neededtest4-ENV): Likewise. * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * io/ftwtest-sh (LANG): Remove variable. * libio/Makefile (tst-widetext-ENV): Likewise. * manual/install.texi (Running make install): Don't refer to environment settings for make install. * INSTALL: Regenerated. * nptl/tst-tls6.sh: Don't set LANG. * posix/globtest.sh (LANG): Remove variable. * string/Makefile (tester-ENV): Likewise. (inl-tester-ENV): Likewise. (noinl-tester-ENV): Likewise. * sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * timezone/Makefile (build-testdata): Use $(built-program-cmd) without explicit environment settings. localedata/ChangeLog: * tst-fmon.sh: Don't set LANGUAGE. * tst-locale.sh: Likewise.
2014-06-06Don't require test wrappers to preserve environment variables, use more ↵Joseph Myers1-2/+2
consistent environment. One wart in the original support for test wrappers for cross testing, as noted in <https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the requirement for test wrappers to pass a poorly-defined set of environment variables from the build system to the system running the glibc under test. Although some variables are passed explicitly via $(test-wrapper-env), including LD_* variables that simply can't be passed implicitly because of the side effects they'd have on the build system's dynamic linker, others are passed implicitly, including variables such as GCONV_PATH and LOCPATH that could potentially affect the build system's libc (so effectively relying on any such effects not breaking the wrappers). In addition, the code in cross-test-ssh.sh for preserving environment variables is fragile (it depends on how bash formats a list of exported variables, and could well break for multi-line variable definitions where the contents contain things looking like other variable definitions). This patch moves to explicitly passing environment variables via $(test-wrapper-env). Makefile variables that previously used $(test-wrapper) are split up into -before-env and -after-env parts that can be passed separately to the various .sh files used in testing, so those files can then insert environment settings between the two parts. The common default environment settings in make-test-out are made into a separate makefile variable that can also be passed to scripts, rather than many scripts duplicating those settings (for testing an installed glibc, it is desirable to have the GCONV_PATH setting on just one place, so just that one place needs to support it pointing to an installed sysroot instead of the build tree). The default settings are included in the variables such as $(test-program-prefix), so that if tests do not need any non-default settings they can continue to use single variables rather than the split-up variables. Although this patch cleans up LC_ALL=C settings (that being part of the common defaults), various LANG=C and LANGUAGE=C settings remain. Those are generally unnecessary and I propose a subsequent cleanup to remove them. LC_ALL takes precedence over LANG, and while LANGUAGE takes precedence over LC_ALL, it only does so for settings other than LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C locale, and anything that gets LC_ALL=C does not need the other settings. While preparing this patch I noticed some tests with .sh files that appeared to do nothing beyond what the generic makefile support for tests can do (localedata/tst-wctype.sh - the makefiles support -ENV variables and .input files - and localedata/tst-mbswcs.sh - just runs five tests that could be run individually from the makefile). So I propose another subsequent cleanup to move those to using the generic support instead of special .sh files. Tested x86_64 (native) and powerpc32 (cross). * Makeconfig (run-program-env): New variable. (run-program-prefix-before-env): Likewise. (run-program-prefix-after-env): Likewise. (run-program-prefix): Define in terms of new variables. (built-program-cmd-before-env): New variable. (built-program-cmd-after-env): Likewise. (built-program-cmd): Define in terms of new variables. (test-program-prefix-before-env): New variable. (test-program-prefix-after-env): Likewise. (test-program-prefix): Define in terms of new variables. (test-program-cmd-before-env): New variable. (test-program-cmd-after-env): Likewise. (test-program-cmd): Define in terms of new variables. * Rules (make-test-out): Use $(run-program-env). * scripts/cross-test-ssh.sh (env_blacklist): Remove variable. (help): Do not mention environment variables. Mention --timeoutfactor option. (timeoutfactor): New variable. (blacklist_exports): Remove function. (exports): Remove variable. (command): Do not include ${exports}. * manual/install.texi (Configuring and compiling): Do not mention test wrappers preserving environment variables. Mention that last assignment to a variable must take precedence. * INSTALL: Regenerated. * benchtests/Makefile (run-bench): Use $(run-program-env). * catgets/Makefile ($(objpfx)test1.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test2.cat): Do not specify environment variables explicitly. ($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)sample.SJIS.cat): Do not specify environment variables explicitly. * catgets/test-gencat.sh: Use test_program_cmd_before_env, run_program_env and test_program_cmd_after_env arguments. * elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env). * elf/tst-pathopt.sh: Use run_program_env argument. * iconvdata/Makefile ($(objpfx)iconv-test.out): Use $(test-wrapper-env) and $(run-program-env). * iconvdata/run-iconv-test.sh: Use test_wrapper_env and run_program_env arguments. * iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly. * intl/Makefile ($(objpfx)tst-gettext.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-gettext2.out): Likewise. * intl/tst-gettext.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * intl/tst-gettext2.sh: Likewise. * intl/tst-gettext4.sh: Do not set environment variables explicitly. * intl/tst-gettext6.sh: Likewise. * intl/tst-translit.sh: Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * malloc/tst-mtrace.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * math/Makefile (run-regen-ulps): Use $(run-program-env). * nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env). * nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C explicitly with each use of ${test_wrapper_env}. * posix/Makefile ($(objpfx)wordexp-tst.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * posix/tst-getconf.sh: Do not set environment variables explicitly. * posix/wordexp-tst.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * stdio-common/tst-printf.sh: Do not set environment variables explicitly. * stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. Split $test calls into $test_pre and $test. * timezone/Makefile (build-testdata): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). localedata/ChangeLog: * Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)sort-test.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env), $(run-program-env) and $(run-program-prefix-after-env). ($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env), $(run-program-env), $(run-program-prefix-after-env), $(test-program-prefix-before-env) and $(test-program-prefix-after-env). ($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)tst-langinfo-static.out): Likewise. * gen-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * sort-test.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * tst-ctype.sh: Use tst_ctype_before_env, run_program_env and tst_ctype_after_env arguments. * tst-fmon.sh: Use run_program_prefix_before_env, run_program_env and run_program_prefix_after_env arguments. * tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env and tst_langinfo_after_env arguments. * tst-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * tst-mbswcs.sh: Do not set environment variables explicitly. * tst-numeric.sh: Likewise. * tst-rpmatch.sh: Likewise. * tst-trans.sh: Use run_program_prefix_before_env, run_program_env, run_program_prefix_after_env, test_program_prefix_before_env and test_program_prefix_after_env arguments. * tst-wctype.sh: Use tst_wctype_before_env, run_program_env and tst_wctype_after_env arguments.
2014-05-16Fix variable used in sed expression in timezone/MakefileAllan McRae1-1/+1
2014-05-13tzselect: use zonedir instead of current working directorySami Kerola1-1/+1
2014-03-07Count miscellaneous files built on host for testing as tests.Joseph Myers1-2/+10
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> I raised the question of counting miscellaneous dependencies of tests, built on the host rather than the build system, as tests, so that when test failures don't stop "make check" neither do those other builds on the host, so that a flaky host doesn't stop "make check" from producing a complete summary of test results. Brooks supported that idea in <https://sourceware.org/ml/libc-alpha/2014-02/msg00301.html>. This patch implements that change for all the examples I could find: one message catalog in catgets/, locales in localedata/ and timezone files in timezone/. Tested x86_64. * catgets/Makefile (tests-special): Add $(objpfx)sample.SJIS.cat. ($(objpfx)sample.SJIS.cat): Use $(evaluate-test). * timezone/Makefile (testdata): Move definition above include of Rules. (test-zones): New variable. (tests-special): Add zone files. (build-testdata): Use $(evaluate-test). localedata/ChangeLog: * Makefile (LOCALES): Move definition above include of Rules. (LOCALE_SRCS): Likewise. (CHARMAPS): Likewise. (CTYPE_FILES): Likewise. (tests-special): Add locale files. ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(evaluate-test).
2014-02-28Fix fallout from Joseph's untested Makeconfig change.Roland McGrath1-2/+2
2014-02-26Consistently include Makeconfig after defining subdir.Joseph Myers1-4/+2
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
2014-02-08tzselect: stop requiring kshMike Frysinger2-3/+1
This script works fine under bash (which we already require), so drop the legacy ksh munging. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2014-01-01Update copyright notices with scripts/update-copyrightsAllan McRae2-2/+2
2013-12-20Update timezone code from tzcode 2013i.Joseph Myers7-480/+1064
Now we have Paul's support for version-3 tz files checked in, this patch updates all the code we take (unmodified) from tzcode to version 2013i (which includes the support for generating version-3 tz files where necessary). Tested x86_64. * timezone/checktab.awk: Update from tzcode 2013i. * timezone/private.h: Likewise. * timezone/scheck.c: Likewise. * timezone/tzfile.h: Likewise. * timezone/tzselect.ksh: Likewise. * timezone/zdump.c: Likewise. * timezone/zic.c: Likewise.
2013-03-13Update zic from tzcode 2013b.Joseph Myers1-2/+4
2013-01-02Update copyright notices with scripts/update-copyrights.Joseph Myers2-2/+2
2012-11-13Update tzcode from upstream git and support --with-bugurl for it.Joseph Myers4-14/+18
2012-11-10Use glibc version information in zic and zdump.Joseph Myers3-4/+8
2012-11-09Use unmodified tzselect.ksh in glibc.Joseph Myers3-7/+8
2012-11-09Update tzcode to 2012i.Joseph Myers10-463/+224
2012-04-25Update zdump and zic from tzcode 2012b.Joseph Myers3-12/+75
2012-03-21Do not install iso3166.tab and zone.tabAllan McRae1-5/+0
2012-03-21 Allan McRae <allan@archlinux.org> * timezone/Makefile: Do not install iso3166.tab and zone.tab
2012-03-07Remove distribute variable from MakefilesUlrich Drepper1-7/+2
2012-03-07Don't install timezone rule filesUlrich Drepper1-101/+1
2012-02-09Replace FSF snail mail address with URLs.Paul Eggert2-6/+4
2009-06-15Update from tzcode2009i.Ulrich Drepper3-22/+52
2009-06-15Update timezone data from tzdata2009i.Ulrich Drepper19-95/+645
2008-10-01* timezone/africa: Update from tzdata2008f.Ulrich Drepper8-73/+517
* timezone/asia: Likewise. * timezone/australasia: Likewise. * timezone/europe: Likewise. * timezone/leapseconds: Likewise. * timezone/northamerica: Likewise. * timezone/southamerica: Likewise. * timezone/zone.tab: Likewise.
2008-04-11* version.h (VERSION): Bump to 2.8.Ulrich Drepper3-182/+98
2008-04-11* timzeone/asia: Update from tzdata2008b.Ulrich Drepper8-60/+344
* timezone/backward: Likewise. * timezone/europe: Likewise. * timezone/northamerica: Likewise. * timezone/southamerica: Likewise. * timezone/iso3166.tab: Likewise. * timezone/leapseconds: Likewise. * timezone/zone.tab: Likewise. * timezone/private.h: Update from tzcode2008a. * timezone/zdump.c: Likewise. * timezone/zic.c: Likewise.
2007-10-14* include/time.h: Declare __tzset_parse_tz and __tzset_compute.Ulrich Drepper1-2/+1
* time/tzset.c (tzset_internal): Break TZ string parsing out into __tzset_parse_tz and updating of daylight, timezone, tzname into update_vars. (__tz_compute): Renamed from tz_compute. Take additional parameters. (__tz_convert): Updating of tm_isdst, tm_zone, and tm_gmtoff now happens in __tz_compute. * time/tzfile.c (__tzfile_read): Also read TZ string. (find_transition): Fold into __tzfile_compute. (__tzfile_compute): For times beyond the last transition try to use the TZ string. * timezone/tst-timezone.c: Information in daylight and tzname does change for Asia/Tokyo timezone with more concrete information. Remove the test. * include/stdio.h: Add libc_hidden_proto for ftello. * libio/ftello.c: Add libc_hidden_def.
2007-10-05[BZ #5063]Ulrich Drepper10-145/+344
* timezone/zic.c: Update from tzcode2007h. [BZ #5063] * timezone/africa: Update from tzdata2007h. * timezone/antarctica: Likewise. * timezone/asia: Likewise. * timezone/australasia: Likewise. * timezone/europe: Likewise. * timezone/leapseconds: Likewise. * timezone/northamerica: Likewise. * timezone/southamerica: Likewise. * timzeone/zone.tab: Likewise. * sysdeps/unix/sysv/linux/Versions: Export eventfd, eventfd_read,
2007-07-28* nss/nsswitch.c (__nss_lookup_function): Don't cast &ni->known toUlrich Drepper1-2/+3
void **. * nss/nsswitch.h (service_user): Use void * type for KNOWN field. * nss/nss_files/files-hosts.c (LINE_PARSER): Cast host_addr to char * to avoid warning. * nis/nss_nis/nis-hosts.c (LINE_PARSER): Likewise. * timezone/Makefile (CFLAGS-zdump.c): Add -fwrapv. * locale/programs/ld-ctype.c (ctype_finish, set_class_defaults, allocate_arrays): Cast second argument to charmap_find_symbol to char * to avoid warnings. * locale/programs/repertoire.c (repertoire_new_char): Change from_nr, to_nr and cnt to unsigned long, adjust printf format string. * locale/programs/ld-collate.c (insert_value, handle_ellipsis): Cast second argument to new_element to char * to avoid warnings. * locale/weightwc.h (findidx): Cast &extra[-i] to const int32_t *. * intl/gettextP.h (struct loaded_domain): Change plural to const struct expression *. * intl/plural-eval.c (plural_eval): Change first argument to const struct expression *. * intl/plural-exp.c (EXTRACT_PLURAL_EXPRESSION): Change first argument to const struct expression **. * intl/plural-exp.h (EXTRACT_PLURAL_EXPRESSION, plural_eval): Adjust prototypes. * intl/loadmsgcat (_nl_unload_domain): Cast away const in call to __gettext_free_exp. * posix/fnmatch.c (fnmatch): Rearrange code to avoid maybe unitialized wstring/wpattern var warnings. * posix/runtests.c (struct a_test): Make data field const char *. * stdio-common/tst-sprintf2.c (main): Don't declere u, v and buf vars if not LDBL_MANT_DIG >= 106. * stdio-common/Makefile (CFLAGS-vfwprintf.c): Add -Wno-unitialized. * stdio-common/vfprintf.c (vfprintf): Cast first arugment to __find_specmb to avoid warning. * rt/tst-mqueue1.c (do_one_test): Add casts to avoid warnings. * debug/test-strcpy_chk.c (do_tests, do_random_tests): Add casts to avoid warnings. * sysdeps/ieee754/ldbl-96/s_roundl.c (huge): Add L suffix to initializer. * sysdeps/unix/clock_gettime.c (clock_gettime): Only define tv var when it will be actually used. * sunrpc/rpc_cmsg.c (xdr_callmsg): Cast IXDR_PUT_* to void to avoid warnings.
2007-03-26[BZ #4276] Jakub Jelinek13-166/+316
* timezone/africa: Update from tzdata2007d. * timezone/asia: Likewise. * timezone/australasia: Likewise. * timezone/backward: Likewise. * timezone/europe: Likewise. * timezone/iso3166.tab: Likewise. * timezone/leapseconds: Likewise. * timezone/northamerica: Likewise. * timezone/southamerica: Likewise. * timezone/zone.tab: Likewise. * timezone/private.h: Update from tzcode2007d. * timezone/zdump.c: Likewise. * timezone/zic.c: Likewise. 2007-03-26 Jakub Jelinek <jakub@redhat.com> [BZ #4276] * timezone/africa: Update from tzdata2007d. * timezone/asia: Likewise. * timezone/australasia: Likewise. * timezone/backward: Likewise. * timezone/europe: Likewise. * timezone/iso3166.tab: Likewise. * timezone/leapseconds: Likewise. * timezone/northamerica: Likewise. * timezone/southamerica: Likewise. * timezone/zone.tab: Likewise. * timezone/private.h: Update from tzcode2007d. * timezone/zdump.c: Likewise. * timezone/zic.c: Likewise.
2007-01-11[BZ #2510, BZ #2830, BZ #3137, BZ #3313, BZ #3426, BZ #3465, BZ #3480, BZ ↵Ulrich Drepper18-784/+1677
#3483, BZ #3493, BZ #3514, BZ #3515, BZ #3664, BZ #3673, BZ #3674] 2007-01-11 Jakub Jelinek <jakub@redhat.com> * sysdeps/i386/soft-fp/sfp-machine.h: Remove. * sysdeps/x86_64/soft-fp/sfp-machine.h: Likewise. 2007-01-10 Ulrich Drepper <drepper@redhat.com> * io/fts.c: Make sure fts_cur is always valid after return from fts_read. Patch by Miloslav Trmac <mitr@redhat.com>. 2006-10-27 Richard Sandiford <richard@codesourcery.com> * elf/elf.h (R_MIPS_GLOB_DAT): Define. (R_MIPS_NUM): Bump by 1. 2007-01-03 Jakub Jelinek <jakub@redhat.com> * posix/execvp.c: Include alloca.h. (allocate_scripts_argv): Renamed to... (scripts_argv): ... this. Don't allocate buffer here nor count arguments. (execvp): Use alloca if possible. * posix/Makefile: Add rules to build and run tst-vfork3 test. * posix/tst-vfork3.c: New test. * stdlib/Makefile (tst-strtod3-ENV): Define. 2007-01-02 Ulrich Drepper <drepper@redhat.com> * posix/getconf.c: Update copyright year. * nss/getent.c: Likewise. * iconv/iconvconfig.c: Likewise. * iconv/iconv_prog.c: Likewise. * elf/ldconfig.c: Likewise. * catgets/gencat.c: Likewise. * csu/version.c: Likewise. * elf/ldd.bash.in: Likewise. * elf/sprof.c (print_version): Likewise. * locale/programs/locale.c: Likewise. * locale/programs/localedef.c: Likewise. * nscd/nscd.c (print_version): Likewise. * debug/xtrace.sh: Likewise. * malloc/memusage.sh: Likewise. * malloc/mtrace.pl: Likewise. * debug/catchsegv.sh: Likewise. 2006-12-24 Ulrich Drepper <drepper@redhat.com> * malloc/malloc.c (sYSMALLOc): Remove some unnecessary alignment attempts. 2006-12-23 Ulrich Drepper <drepper@redhat.com> * posix/wordexp.c: Remove some unnecessary tests. 2006-12-20 SUGIOKA Toshinobu <sugioka@itonet.co.jp> * sysdeps/unix/sysv/linux/sh/bits/shm.h: New file. * nss/getXXbyYY_r.c: Include atomic.h. (INTERNAL (REENTRANT_NAME)): Write startp after start_fct, add atomic_write_barrier () in between. 2006-11-28 Jakub Jelinek <jakub@redhat.com> * elf/dl-support.c: Include dl-procinfo.h. * sysdeps/powerpc/dl-procinfo.h (PPC_PLATFORM_POWER4, PPC_PLATFORM_PPC970, PPC_PLATFORM_POWER5, PPC_PLATFORM_POWER5_PLUS, PPC_PLATFORM_POWER6, PPC_PLATFORM_CELL_BE, PPC_PLATFORM_POWER6X): Define. (_dl_string_platform): Use PPC_PLATFORM_* macros instead of hardcoded constants. * sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_platform): Use PPC_PLATFORM_* macros for array designators. 2006-11-11 Steven Munroe <sjmunroe@us.ibm.com> * sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_cap_flags): Add 3 new cap names to the beginning. (_dl_powerpc_platforms): Add "power6x". * sysdeps/powerpc/dl-procinfo.h (_DL_HWCAP_FIRST): Decrease. (HWCAP_IMPORTANT): Add PPC_FEATURE_HAS_DFP. (_DL_PLATFORMS_COUNT): Increase. (_dl_string_platform): Handle power6x case. * sysdeps/powerpc/sysdep.h (PPC_FEATURE_PA6T, PPC_FEATURE_HAS_DFP, PPC_FEATURE_POWER6_EXT): Define. (PPC_FEATURE_POWER5, PPC_FEATURE_POWER5_PLUS): Correct Comment. [-2^31 .. 2^31) range. * sysdeps/unix/sysv/linux/bits/statvfs.h: Define ST_RELATIME. * sysdeps/unix/sysv/linux/internal_statvfs.c (__statvfs_getflags): Handle relatime mount option. 2006-12-13 Jakub Jelinek <jakub@redhat.com> * sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext.S: Include kernel-features.h. 2006-12-11 Ulrich Drepper <drepper@redhat.com> * stdlib/strtod_l.c (____STRTOF_INTERNAL): Parse thousand separators also if no non-zero digits found. * stdlib/Makefile (tests): Add tst-strtod3. [BZ #3664] * stdlib/strtod_l.c (____STRTOF_INTERNAL): Fix test to recognize empty parsed strings. * stdlib/Makefile (tests): Add tst-strtod2. * stdlib/tst-strtod2.c: New file. [BZ #3673] * stdlib/strtod_l.c (____STRTOF_INTERNAL): Fix exp_limit computation. * stdlib/Makefile (tests): Add tst-atof2. * stdlib/tst-atof2.c: New file. [BZ #3674] * stdlib/strtod_l.c (____STRTOF_INTERNAL): Adjust exponent value correctly if removing trailing zero of hex-float. * stdlib/Makefile (tests): Add tst-atof1. * stdlib/tst-atof1.c: New file. * misc/mntent_r.c (__hasmntopt): Check p[optlen] even when p == rest. Start searching for next comma at p rather than rest. * misc/Makefile (tests): Add tst-mntent2. * misc/tst-mntent2.c: New test. 2006-12-08 Ulrich Drepper <drepper@redhat.com> * malloc/memusage.c: Handle realloc with new size of zero and non-NULL pointer correctly. (me): Really write first record twice. (struct entry): Make format bi-arch safe. (dest): Write out more realloc statistics. * malloc/memusagestat.c (struct entry): Make format bi-arch safe. 2006-12-05 Jakub Jelinek <jakub@redhat.com> * nis/nis_subr.c (nis_getnames): Revert last change. 2006-12-03 Kaz Kojima <kkojima@rr.iij4u.or.jp> * sysdeps/unix/sysv/linux/sh/sys/io.h: Removed. 2006-11-30 H.J. Lu <hongjiu.lu@intel.com> * sysdeps/i386/i686/memcmp.S: Use jump table as the base of jump table entries. 2006-11-30 Jan Kratochvil <jan.kratochvil@redhat.com> * sysdeps/unix/sysv/linux/i386/clone.S: Provide CFI for the outermost `clone' function to ensure proper unwinding stop of gdb. * sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise. 2006-12-01 Ulrich Drepper <drepper@redhat.com> * nscd/nscd.init: Remove obsolete and commented-out -S option handling. 2006-11-23 Jakub Jelinek <jakub@redhat.com> [BZ #3514] * manual/string.texi (strncmp): Fix pastos from wcscmp description. [BZ #3515] * manual/string.texi (strtok): Remove duplicate paragraph. 2006-12-01 Jan Kratochvil <jan.kratochvil@redhat.com> * sysdeps/unix/sysv/linux/x86_64/sigaction.c: Fix compatibility with libgcc not supporting `rflags' unwinding (register # >= 17). 2006-11-30 Jakub Jelinek <jakub@redhat.com> * sunrpc/svc_run.c (svc_run): Set my_pollfd to new_pollfd if realloc succeeded. 2006-11-29 Daniel Jacobowitz <dan@codesourcery.com> Jakub Jelinek <jakub@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * sysdeps/unix/sysv/linux/x86_64/sigaction.c (restore_rt): Add correct unwind information. * sysdeps/unix/sysv/linux/x86_64/Makefile: Provide symbols for 'restore_rt' even in the 'signal' directory. * sysdeps/unix/sysv/linux/x86_64/ucontext_i.sym: Extend the regs list. malloc crashed. Don't allocate memory unnecessarily in each loop. 2006-10-21 Jakub Jelinek <jakub@redhat.com> * resolv/mapv4v6addr.h (map_v4v6_address): Fix last change. 2006-11-20 Ulrich Drepper <drepper@redhat.com> * resolv/mapv4v6addr.h (map_v4v6_address): Optimize a bit. 2006-11-18 Bruno Haible <bruno@clisp.org> * sysdeps/unix/sysv/linux/i386/getgroups.c (__getgroups): Invoke __sysconf only after having tried to call getgroups32. 2006-11-19 Ulrich Drepper <drepper@redhat.com> * nss/nss_files/files-hosts.c (LINE_PARSER): Support IPv6-style addresses for IPv4 queries if they can be mapped. 2006-11-16 Jakub Jelinek <jakub@redhat.com> * sysdeps/x86_64/fpu/s_copysignf.S (__copysignf): Switch to .text. * sysdeps/x86_64/fpu/s_copysign.S (__copysign): Likewise. (signmask): Add .size directive. (othermask): Add .type directive. 2006-11-14 Ulrich Drepper <drepper@redhat.com> * po/nl.po: Update from translation team. * timezone/zdump.c: Redo fix for BZ #3137. 2006-11-14 Jakub Jelinek <jakub@redhat.com> * nss/nss_files/files-alias.c (get_next_alias): Set line back to first_unused after parsing :include: file. * timezone/africa: Update from tzdata2006o. * timezone/antarctica: Likewise. * timezone/asia: Likewise. * timezone/australasia: Likewise. * timezone/backward: Likewise. * timezone/europe: Likewise. * timezone/iso3166.tab: Likewise. * timezone/northamerica: Likewise. * timezone/southamerica: Likewise. * timezone/zone.tab: Likewise. * time/tzfile.c (__tzfile_read): Extend to handle new file format on machines with 64-bit time_t. * timezone/checktab.awk: Update from tzcode2006o. * timezone/ialloc.c: Likewise. * timezone/private.h: Likewise. * timezone/scheck.c: Likewise. * timezone/tzfile.h: Likewise. * timezone/tzselect.ksh: Likewise. * timezone/zdump.c: Likewise. * timezone/zic.c: Likewise. [BZ #3483] * elf/ldconfig.c (main): Call setlocale and textdomain. Patch mostly by Benno Schulenberg <bensberg@justemail.net>. [BZ #3480] * manual/argp.texi: Fix typos. * manual/charset.texi: Likewise. * manual/errno.texi: Likewise. * manual/filesys.texi: Likewise. * manual/lang.texi: Likewise. * manual/maint.texi: Likewise. * manual/memory.texi: Likewise. * manual/message.texi: Likewise. * manual/resource.texi: Likewise. * manual/search.texi: Likewise. * manual/signal.texi: Likewise. * manual/startup.texi: Likewise. * manual/stdio.texi: Likewise. * manual/sysinfo.texi: Likewise. * manual/syslog.texi: Likewise. * manual/time.texi: Likewise. Patch by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>. [BZ #3465] * sunrpc/clnt_raw.c: Minimal message improvements. * sunrpc/pm_getmaps.c: Likewise. * nis/nss_nisplus/nisplus-publickey.c: Likewise. * nis/nis_print_group_entry.c: Likewise. * locale/programs/repertoire.c: Likewise. * locale/programs/charmap.c: Likewise. * malloc/memusage.sh: Likewise. * elf/dl-deps.c: Likewise. * locale/programs/ld-collate.c: Likewise. * libio/vswprintf.c: Likewise. * malloc/memusagestat.c: Likewise. * sunrpc/auth_unix.c: Likewise. * sunrpc/rpc_main.c: Likewise. * nscd/cache.c: Likewise. * locale/programs/repertoire.c: Unify output messages. * locale/programs/charmap.c: Likewise. * locale/programs/ld-ctype.c: Likewise. * locale/programs/ld-monetary.c: Likewise. * locale/programs/ld-numeric.c: Likewise. * locale/programs/ld-time.c: Likewise. * elf/ldconfig.c: Likewise. * nscd/selinux.c: Likewise. * elf/cache.c: Likewise. Patch mostly by Benno Schulenberg <bensberg@justemail.net>. 2006-11-10 Jakub Jelinek <jakub@redhat.com> * string/strxfrm_l.c (STRXFRM): Fix trailing \1 optimization if N is one bigger than return value. * string/tst-strxfrm2.c (do_test): Also test strxfrm with l1 + 1 and l1 last arguments, if buf is defined, verify the return value equals to strlen (buf) and verify no byte beyond passed length is modified. 2006-11-10 Ulrich Drepper <drepper@redhat.com> * po/sv.po: Update from translation team. * sysdeps/gnu/siglist.c (__old_sys_siglist, __old_sys_sigabbrev): Use __new_sys_siglist instead of _sys_siglist_internal as second macro argument. (_old_sys_siglist): Use declare_symbol_alias macro instead of strong_alias. 2006-11-09 Ulrich Drepper <drepper@redhat.com> [BZ #3493] * posix/unistd.h (sysconf): Remove const attribute. * sysdeps/posix/getaddrinfo.c (getaddrinfo): Fix test for temporary or deprecated addresses. Patch by Sridhar Samudrala <sri@us.ibm.com>. * string/Makefile (tests): Add tst-strxfrm2. * string/tst-strxfrm2.c: New file. 2006-10-09 Jakub Jelinek <jakub@redhat.com> * elf/dl-debug.c (_dl_debug_initialize): Check r->r_map for 0 rather than r->r_brk. * string/strxfrm_l.c (STRXFRM): Do the trailing \1 removal optimization even if needed > n. 2006-11-07 Jakub Jelinek <jakub@redhat.com> * include/libc-symbols.h (declare_symbol): Rename to... (declare_symbol_alias): ... this. Add ORIGINAL argument, imply strong_alias (ORIGINAL, SYMBOL) in asm to make sure it preceedes .size directive. * sysdeps/gnu/errlist-compat.awk: Adjust for declare_symbol_alias changes. * sysdeps/gnu/siglist.c: Likewise. 2006-11-03 Steven Munroe <sjmunroe@us.ibm.com> * sysdeps/powerpc/fpu/bits/mathinline.h [__LIBC_INTERNAL_MATH_INLINES]: Moved to ... * sysdeps/powerpc/fpu/math_private.h: ...here. New file. 2006-11-05 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/sysconf.c (intel_check_word): Update handling of cache descriptor 0x49 for new models. * sysdeps/unix/sysv/linux/x86_64/sysconf.c (intel_check_word): Likewise. 2006-11-02 Ulrich Drepper <drepper@redhat.com> * configure.in: Work around ld --help change and avoid -z relro test completely if the architecture doesn't care about security. 2006-11-01 Ulrich Drepper <drepper@redhat.com> * po/sv.po: Update from translation team. 2006-10-31 Ulrich Drepper <drepper@redhat.com> * stdlib/atexit.c (atexit): Don't mark as hidden when used to generate compatibility version. 2006-10-29 Ulrich Drepper <drepper@redhat.com> * configure.in: Relax -z relro requirement a bit. * po/sv.po: Update from translation team. 2006-10-29 Jakub Jelinek <jakub@redhat.com> * elf/dl-sym.c (do_sym): Use RTLD_SINGLE_THREAD_P. * elf/dl-runtime.c (_dl_fixup, _dl_profile_fixup): Likewise. * elf/dl-close.c (_dl_close_worker): Likewise. * elf/dl-open.c (_dl_open_worker): Likewise. * sysdeps/generic/sysdep-cancel.h (RTLD_SINGLE_THREAD_P): Define. * configure.in: Require assembler support for visibility, compiler support for visibility and aliases, linker support for various -z options. * Makeconfig: Remove conditional code which now is unnecessary. * config.h.in: Likewise. * config.make.in: Likewise. * dlfcn/Makefile: Likewise. * elf/Makefile: Likewise. * elf/dl-load.c: Likewise. * elf/rtld.c: Likewise. * include/libc-symbols.h: Likewise. * include/stdio.h: Likewise. * io/Makefile: Likewise. * io/fstat.c: Likewise. * io/fstat64.c: Likewise. * io/fstatat.c: Likewise. * io/fstatat64.c: Likewise. * io/lstat.c: Likewise. * io/lstat64.c: Likewise. * io/mknod.c: Likewise. * io/mknodat.c: Likewise. * io/stat.c: Likewise. * io/stat64.c: Likewise. * libio/stdio.c: Likewise. * nscd/Makefile: Likewise. * stdlib/Makefile: Likewise. * stdlib/atexit.c: Likewise. * sysdeps/generic/ldsodefs.h: Likewise. * sysdeps/i386/dl-machine.h: Likewise. * sysdeps/i386/sysdep.h: Likewise. * sysdeps/i386/i686/memcmp.S: Likewise. * sysdeps/powerpc/powerpc32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/i386/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/sigaction.c: Likewise. * Makerules: USE_TLS support is now default. * tls.make.c: Likewise. * csu/Versions: Likewise. * csu/libc-start.c: Likewise. * csu/libc-tls.c: Likewise. * csu/version.c: Likewise. * dlfcn/dlinfo.c: Likewise. * elf/dl-addr.c: Likewise. * elf/dl-cache.c: Likewise. * elf/dl-close.c: Likewise. * elf/dl-iteratephdr.c: Likewise. * elf/dl-load.c: Likewise. * elf/dl-lookup.c: Likewise. * elf/dl-object.c: Likewise. * elf/dl-open.c: Likewise. * elf/dl-reloc.c: Likewise. * elf/dl-support.c: Likewise. * elf/dl-sym.c: Likewise. * elf/dl-sysdep.c: Likewise. * elf/dl-tls.c: Likewise. * elf/ldconfig.c: Likewise. * elf/rtld.c: Likewise. * elf/tst-tls-dlinfo.c: Likewise. * elf/tst-tls1.c: Likewise. * elf/tst-tls10.h: Likewise. * elf/tst-tls14.c: Likewise. * elf/tst-tls2.c: Likewise. * elf/tst-tls3.c: Likewise. * elf/tst-tls4.c: Likewise. * elf/tst-tls5.c: Likewise. * elf/tst-tls6.c: Likewise. * elf/tst-tls7.c: Likewise. * elf/tst-tls8.c: Likewise. * elf/tst-tls9.c: Likewise. * elf/tst-tlsmod1.c: Likewise. * elf/tst-tlsmod13.c: Likewise. * elf/tst-tlsmod13a.c: Likewise. * elf/tst-tlsmod14a.c: Likewise. * elf/tst-tlsmod2.c: Likewise. * elf/tst-tlsmod3.c: Likewise. * elf/tst-tlsmod4.c: Likewise. * elf/tst-tlsmod5.c: Likewise. * elf/tst-tlsmod6.c: Likewise. * include/errno.h: Likewise. * include/link.h: Likewise. * include/tls.h: Likewise. * locale/global-locale.c: Likewise. * locale/localeinfo.h: Likewise. * malloc/arena.c: Likewise. * malloc/hooks.c: Likewise. * malloc/malloc.c: Likewise. * resolv/Versions: Likewise. * sysdeps/alpha/dl-machine.h: Likewise. * sysdeps/alpha/libc-tls.c: Likewise. * sysdeps/generic/ldsodefs.h: Likewise. * sysdeps/generic/tls.h: Likewise. * sysdeps/i386/dl-machine.h: Likewise. * sysdeps/ia64/dl-machine.h: Likewise. * sysdeps/ia64/libc-tls.c: Likewise. * sysdeps/mach/hurd/fork.c: Likewise. * sysdeps/mach/hurd/i386/tls.h: Likewise. * sysdeps/powerpc/powerpc32/dl-machine.c: Likwise. * sysdeps/powerpc/powerpc32/dl-machine.h: Likewise. * sysdeps/powerpc/powerpc64/dl-machine.h: Likewise. * sysdeps/s390/libc-tls.c: Likewise. * sysdeps/s390/s390-32/dl-machine.h: Likewise. * sysdeps/s390/s390-64/dl-machine.h: Likewise. * sysdeps/sh/dl-machine.h: Likewise. * sysdeps/sparc/sparc32/dl-machine.h: Likewise. * sysdeps/sparc/sparc64/dl-machine.h: Likewise. * sysdeps/x86_64/dl-machine.h: Likewise. [BZ #3426] * stdlib/stdlib.h: Adjust comment for canonicalize_file_name to reality. 2006-10-27 Jakub Jelinek <jakub@redhat.com> * elf/dl-lookup.c (_dl_debug_bindings): Remove unused symbol_scope argument. (_dl_lookup_symbol_x): Adjust caller. * sysdeps/generic/ldsodefs.h (struct link_namespaces): Remove _ns_global_scope. * elf/rtld.c (dl_main): Don't initialize _ns_global_scope. * elf/dl-libc.c: Revert l_scope name changes. * elf/dl-load.c: Likewise. * elf/dl-object.c: Likewise. * elf/rtld.c: Likewise. * elf/dl-close.c (_dl_close): Likewise. * elf/dl-open.c (dl_open_worker): Likewise. If not SINGLE_THREAD_P, always use __rtld_mrlock_{change,done}. Always free old scope list here if not l_scope_mem. * elf/dl-runtime.c (_dl_fixup, _dl_profile_fixup): Revert l_scope name change. Never free scope list here. Just __rtld_mrlock_lock before the lookup and __rtld_mrlock_unlock it after the lookup. * elf/dl-sym.c: Likewise. * include/link.h (struct r_scoperec): Remove. (struct link_map): Replace l_scoperec with l_scope, l_scoperec_mem with l_scope_mem and l_scoperec_lock with l_scope_lock. 2006-10-25 Ulrich Drepper <drepper@redhat.com> * sysdeps/gnu/netinet/tcp.h: Define TCP_CONGESTION. 2006-10-18 Ulrich Drepper <drepper@redhat.com> * configure.in: Disable building profile libraries by default. 2006-10-18 Ulrich Drepper <drepper@redhat.com> * elf/dl-lookup.c (_dl_lookup_symbol_x): Add warning to _dl_lookup_symbol_x code. 2006-10-17 Jakub Jelinek <jakub@redhat.com> * elf/dl-runtime.c: Include sysdep-cancel.h. (_dl_fixup, _dl_profile_fixup): Use __rtld_mrlock_* and scoperec->nusers only if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros. * elf/dl-sym.c: Include sysdep-cancel.h. (do_sym): Use __rtld_mrlock_* and scoperec->nusers only if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros. * elf/dl-close.c: Include sysdep-cancel.h. (_dl_close): Use __rtld_mrlock_* and scoperec->nusers only if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros. * elf/dl-open.c: Include sysdep-cancel.h. (dl_open_worker): Use __rtld_mrlock_* and scoperec->nusers only if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros. 2006-10-17 Jakub Jelinek <jakub@redhat.com> [BZ #3313] * malloc/malloc.c (malloc_consolidate): Set maxfb to address of last fastbin rather than end of fastbin array. 2006-10-18 Ulrich Drepper <drepper@redhat.com> * sysdeps/i386/i486/bits/atomic.h (catomic_decrement): Use correct body macro. * sysdeps/x86_64/bits/atomic.h (__arch_c_compare_and_exchange_val_64_acq): Add missing casts. (catomic_decrement): Use correct body macro. 2006-10-17 Jakub Jelinek <jakub@redhat.com> * include/atomic.h: Add a unique prefix to all local variables in macros. * csu/tst-atomic.c (do_test): Test also catomic_* macros. 2006-10-14 Ulrich Drepper <drepper@redhat.com> * resolv/arpa/nameser.h: Document that ns_t_a6 is deprecated. [BZ #3313] * malloc/malloc.c (malloc_consolidate): Don't use get_fast_max to determine highest fast bin to consolidate, always look into all of them. (do_check_malloc_state): Only require for empty bins for large sizes in main arena. * libio/stdio.h: Add more __wur attributes. 2006-11-12 Andreas Jaeger <aj@suse.de> [BZ #2510] * manual/search.texi (Hash Search Function): Clarify. (Array Search Function): Clarify. 2006-11-12 Joseph Myers <joseph@codesourcery.com> [BZ #2830] * math/atest-exp.c (main): Cast hex value to mp_limb_t before shifting. * math/atest-exp2.c (read_mpn_hex): Likewise. * math/atest-sincos.c (main): Likewise. * sysdeps/unix/sysv/linux/syscalls.list: Add epoll_pwait. * sysdeps/unix/sysv/linux/sys/epoll.h: Declare epoll_pwait. * sysdeps/unix/sysv/linux/Versions (libc): Add epoll_pwait for version GLIBC_2.6. * Versions.def: Add GLIBC_2.6 for libc. * sysdeps/i386/i486/bits/atomic.h: Add catomic_* support. 2006-10-11 Jakub Jelinek <jakub@redhat.com> * malloc/malloc.c (_int_malloc): Remove unused any_larger variable. * nis/nis_defaults.c (__nis_default_access): Don't call getenv twice. * nis/nis_subr.c (nis_getnames): Use __secure_getenv instead of getenv. * sysdeps/generic/unsecvars.h: Add NIS_PATH. 2006-10-11 Ulrich Drepper <drepper@redhat.com> * include/atomic.c: Define catomic_* operations. * sysdeps/x86_64/bits/atomic.h: Likewise. Fix a few minor problems. * stdlib/cxa_finalize.c: Use catomic_* operations instead of atomic_*. * malloc/memusage.c: Likewise. * gmon/mcount.c: Likewise. * elf/dl-close.c: Likewise. * elf/dl-open.c: Likewise. * elf/dl-profile.c: Likewise. * elf/dl-sym.c: Likewise. * elf/dl-runtime.c: Likewise. * elf/dl-fptr.c: Likewise. * resolv/res_libc.c: Likewise. 2006-10-10 Roland McGrath <roland@frob.com> * sysdeps/mach/hurd/utimes.c: Use a union to avoid an improper cast. * sysdeps/mach/hurd/futimes.c: Likewise. * sysdeps/mach/hurd/lutimes.c: Likewise. 2006-10-09 Ulrich Drepper <drepper@redhat.com> Jakub Jelinek <jakub@redhat.com> Implement reference counting of scope records. * elf/dl-close.c (_dl_close): Remove all scopes from removed objects from the list in objects which remain. Always allocate new scope record. * elf/dl-open.c (dl_open_worker): When growing array for scopes, don't resize, allocate a new one. * elf/dl-runtime.c: Update reference counters before using a scope array. * elf/dl-sym.c: Likewise. * elf/dl-libc.c: Adjust for l_scope name change. * elf/dl-load.c: Likewise. * elf/dl-object.c: Likewise. * elf/rtld.c: Likewise. * include/link.h: Include <rtld-lowlevel.h>. Define struct r_scoperec. Replace r_scope with pointer to r_scoperec structure. Add l_scoperec_lock. * sysdeps/generic/ldsodefs.h: Include <rtld-lowlevel.h>. * sysdeps/generic/rtld-lowlevel.h: New file. * include/atomic.h: Rename atomic_and to atomic_and_val and atomic_or to atomic_or_val. Define new macros atomic_and and atomic_or which do not return values. * sysdeps/x86_64/bits/atomic.h: Define atomic_and and atomic_or. Various cleanups. * sysdeps/i386/i486/bits/atomic.h: Likewise. * po/sv.po: Update from translation team. 2006-10-07 Ulrich Drepper <drepper@redhat.com> * Versions.def: Add GLIBC_2.6 to libpthread. * include/shlib-compat.h (SHLIB_COMPAT): Expand parameters before use. (versioned_symbol): Likewise. (compat_symbol): Likewise. * po/tr.po: Update from translation team. * nis/Banner: Removed. It's been integral part forever and the author info is incomplete anyway. * libio/Banner: Likewise. 2006-10-06 Ulrich Drepper <drepper@redhat.com> * version.h (VERSION): Bump to 2.5.90 for new development tree.
2007-07-31.Jakub Jelinek18-1677/+784
2006-11-14[BZ #3137]Ulrich Drepper1-2/+2
2006-11-14 Ulrich Drepper <drepper@redhat.com> * timezone/zdump.c: Redo fix for BZ #3137. * timezone/scheck.c: Likewise.
2006-11-11* timezone/africa: Update from tzdata2006o.Ulrich Drepper10-576/+1015
* timezone/antarctica: Likewise. * timezone/asia: Likewise. * timezone/australasia: Likewise. * timezone/backward: Likewise. * timezone/europe: Likewise. * timezone/iso3166.tab: Likewise. * timezone/northamerica: Likewise. * timezone/southamerica: Likewise. * timezone/zone.tab: Likewise.
2006-11-11* time/tzfile.c (__tzfile_read): Extend to handle new file formatUlrich Drepper8-209/+663
on machines with 64-bit time_t. * timezone/checktab.awk: Update from tzcode2006o. * timezone/ialloc.c: Likewise. * timezone/private.h: Likewise. * timezone/scheck.: Likewise. * timezone/tzfile.h: Likewise. * timezone/tzselect.ksh: Likewise. * timezone/zdump.c: Likewise. * timezone/zic.c: Likewise.
2006-09-21[BZ #3137]Ulrich Drepper1-1/+1
2006-09-20 Jakub Jelinek <jakub@redhat.com> * po/libc.pot: Regenerated. * po/be.po: Updated. * po/ca.po: Likewise. * po/cs.po: Likewise. * po/da.po: Likewise. * po/de.po: Likewise. * po/el.po: Likewise. * po/en_GB.po: Likewise. * po/es.po: Likewise. * po/fi.po: Likewise. * po/fr.po: Likewise. * po/gl.po: Likewise. * po/hr.po: Likewise. * po/hu.po: Likewise. * po/ja.po: Likewise. * po/ko.po: Likewise. * po/nb.po: Likewise. * po/nl.po: Likewise. * po/pl.po: Likewise. * po/pt_BR.po: Likewise. * po/ru.po: Likewise. * po/rw.po: Likewise. * po/sk.po: Likewise. * po/sv.po: Likewise. * po/tr.po: Likewise. * po/zh_CN.po: Likewise. * po/zh_TW.po: Likewise. [BZ #3137] * iconv/iconv_prog.c (main): Fix spelling in error message. * iconv/iconvconfig.c (main): Likewise. * locale/programs/ld-collate.c (handle_ellipsis): Likewise. * locale/programs/ld-ctype.c (charclass_symbolic_ellipsis): Likewise. * locale/programs/localedef.c (main): Likewise. * locale/programs/repertoire.c (repertoire_read): Likewise. * timezone/zdump.c (main): Likewise. * nscd/connections.c (handle_request): Fix spelling in log message. Patch by Malcolm Parsons <malcolm.parsons@gmail.com>.
2006-02-26* timezone/africa: Update from tzdata2006b (comment changes only).Roland McGrath1-1/+1
* timezone/antarctica: Likewise.
2006-02-262006-02-26 Roland McGrath <roland@redhat.com>Roland McGrath17-17/+17
* timezone/antarctica: Update from tzdata2006b (comment changes only). * timezone/asia: Likewise. * timezone/australasia: Likewise. * timezone/backward: Likewise. * timezone/etcetera: Likewise. * timezone/europe: Likewise. * timezone/factory: Likewise. * timezone/iso3166.tab: Likewise. * timezone/leapseconds: Likewise. * timezone/northamerica: Likewise. * timezone/pacificnew: Likewise. * timezone/solar87: Likewise. * timezone/solar88: Likewise. * timezone/solar89: Likewise. * timezone/southamerica: Likewise. * timezone/systemv: Likewise. * timezone/zone.tab: Likewise.
2006-02-02* timezone/private.h: Update from tzcode2006a.Roland McGrath5-82/+184
* timezone/scheck.c: Likewise. * timezone/asia: Update from tzdata2006a. * timezone/northamerica: Likewise. * timezone/zone.tab: Likewise.
2006-01-102006-01-10 Roland McGrath <roland@redhat.com>Roland McGrath1-1/+1
* timezone/test-tz.c: Revert last change, updating to match tzdata2005r definition of "MST".
2006-01-10* sysdeps/hppa/elf/start.S (_start): Use PLABEL32 relocationsRoland McGrath13-181/+273
by using LR and RR. Add %sr0 to iitlbp. * timezone/private.h: Update from tzcode2005r. * timezone/tzfile.h: Likewise. * timezone/zdump.c: Likewise. * timezone/zic.c: Likewise. * timezone/africa: Update from tzdata2005r. * timezone/antarctica: Likewise. * timezone/asia: Likewise. * timezone/australasia: Likewise. * timezone/backward: Likewise. * timezone/europe: Likewise. * timezone/northamerica: Likewise. * timezone/southamerica: Likewise. * timezone/systemv: Likewise.
2005-12-20[BZ #1952, BZ #1955]cvs/fedora-glibc-20051220T1028Ulrich Drepper1-1/+1
2005-12-19 Ulrich Drepper <drepper@redhat.com> [BZ #1955] * timezone/zic.c (tofile;): Fix typo in symlink creation. Patch by Phil Estes <pestes@us.ibm.com>. [BZ #1952] * sysdeps/unix/sysv/linux/time.c: New file. * sysdeps/unix/sysv/linux/i386/syscalls.list: Remove time entry. 2005-12-15 Thomas Schwinge <tschwinge@gnu.org>
2005-09-17* timezone/zdump.c: Include ctype.h.Andreas Jaeger1-0/+1
2005-09-17 Andreas Jaeger <aj@suse.de> * timezone/zdump.c: Include ctype.h.
2005-09-07* timezone/test-tz.c: Update to match tzdata2005m.Ulrich Drepper2-4/+4
* timezone/tst-timezone.c: Likewise.
2005-09-07* timezone/africa: Update from tzdata2005m.Ulrich Drepper9-163/+321
* timezone/asia: Likewise. * timezone/australasia: Likewise. * timezone/backward: Likewise. * timezone/europe: Likewise. * timezone/northamerica: Likewise. * timezone/southamerica: Likewise. * timezone/zone.tab: Likewise. * timezone/zdump.c: Update from tzcode2005m.
2005-08-07* elf/elf.h (DT_ALPHA_PLTRO): Use symbolic name in DT_ALPHA_PLTROUlrich Drepper13-114/+124
definition.
2005-08-06Update from tzcode2005k.Ulrich Drepper6-24/+108
generated by cgit v1.1 at 2024-11-25 01:41:07 +0000