aboutsummaryrefslogtreecommitdiff
path: root/sysdeps
AgeCommit message (Collapse)AuthorFilesLines
2019-08-29MIPS support for GNU hashMihailo Stojanovic5-1/+36
This patch is a reimplementation of [1], which was submitted back in 2015. Copyright issue has been sorted [2] last year. It proposed a new section (.gnu.xhash) and related dynamic tag (GT_GNU_XHASH). The new section would be virtually identical to the existing .gnu.hash except for the translation table (xlat) which would contain correct MIPS .dynsym indexes corresponding to the hashvals in chains. This is because MIPS ABI imposes a different ordering of the dynsyms than the one expected by the .gnu.hash section. Another addition would be a leading word at the beggining of the section, which would contain the number of entries in the translation table. In this patch, the new section name and dynamic tag are changed to reflect the fact that the section should be treated as MIPS specific (.MIPS.xhash and DT_MIPS_XHASH). This patch addresses the alignment issue reported in [3] which is caused by the leading word of the .MIPS.xhash section. Leading word is now removed in the corresponding binutils patch, and the number of entries in the translation table is computed using DT_MIPS_SYMTABNO dynamic tag. Since the MIPS specific dl-lookup.c file was removed following the initial patch submission, I opted for the definition of three new macros in the generic ldsodefs.h. ELF_MACHINE_GNU_HASH_ADDRIDX defines the index of the dynamic tag in the l_info array. ELF_MACHINE_HASH_SYMIDX is used to calculate the index of a symbol in GNU hash. On MIPS, it is defined to look up the symbol index in the translation table. ELF_MACHINE_XHASH_SETUP is defined for MIPS only. It initializes the .MIPS.xhash pointer in the link_map_machine struct. The other major change is bumping the highest EI_ABIVERSION value for MIPS to suggest that the dynamic linker now supports GNU hash. The patch was tested by running the glibc testsuite for the three MIPS ABIs (o32, n32 and n64) and for x86_64-linux-gnu. [1] https://sourceware.org/ml/binutils/2015-10/msg00057.html [2] https://sourceware.org/ml/binutils/2018-03/msg00025.html [3] https://sourceware.org/ml/binutils/2016-01/msg00006.html * elf/dl-addr.c (determine_info): Calculate the symbol index using the newly defined ELF_MACHINE_HASH_SYMIDX macro. * elf/dl-lookup.c (do_lookup_x): Ditto. (_dl_setup_hash): Initialize MIPS xhash translation table. * elf/elf.h (SHT_MIPS_XHASH): New define. (DT_MIPS_XHASH): New define. * sysdeps/generic/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New define. (ELF_MACHINE_HASH_SYMIDX): Ditto. (ELF_MACHINE_XHASH_SETUP): Ditto. * sysdeps/mips/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New define. (ELF_MACHINE_HASH_SYMIDX): Ditto. (ELF_MACHINE_XHASH_SETUP): Ditto. * sysdeps/mips/linkmap.h (struct link_map_machine): New member. * sysdeps/unix/sysv/linux/mips/ldsodefs.h: Increment valid ABI version. * sysdeps/unix/sysv/linux/mips/libc-abis: New ABI version.
2019-08-29sh: Split BE/LE abilistAdhemerval Zanella36-9/+3744
The fix for BZ#18231 requires new symbols only for sh4eb. This patch adds the required folder and files for both BE and LE abilist. No semantic changes are expected. Checked with check-abi for sh4eb-linux-gnu and sh4-linux-gnu. * sysdeps/sh/preconfigure.ac: New file. * sysdeps/sh/preconfigure: Regenerate. * sysdeps/sh/be/sh3/Implies: New file. * sysdeps/sh/be/sh4/Implies: Likewise. * sysdeps/sh/le/sh3/Implies: Likewise. * sysdeps/sh/le/sh4/Implies: Likewise. * sysdeps/unix/sysv/linux/sh/le/sh3/Implies: Likewise. * sysdeps/unix/sysv/linux/sh/le/sh4/Implies: Likewise. * sysdeps/unix/sysv/linux/sh/*.abilist: Move to sysdeps/unix/sysv/linux/sh/le/*.abilist. * sysdeps/unix/sysv/linux/sh/be/*.abilist: New files.
2019-08-29microblaze: Split BE/LE abilistAdhemerval Zanella30-1/+3651
The fix for BZ#18231 requires new symbols only for microblaze. This patch adds the required folder and files for both BE and LE abilist. No semantic changes are expected. Checked with check-abi for microblaze-linux-gnueabihf and microblazeel-linux-gnueabihf. * sysdeps/microblaze/preconfigure.ac: New file. * sysdeps/microblaze/preconfigure: Regenerate. * sysdeps/microblaze/be/implies: New file. * sysdeps/microblaze/le/implies: Likewise. * sysdeps/unix/sysv/linux/microblaze/be/implies: Likewise. * sysdeps/unix/sysv/linux/microblaze/le/implies: Likewise. * sysdeps/unix/sysv/linux/microblaze/*.abilist. Move to sysdeps/unix/sysv/linux/microblaze/be/*.abilist. * sysdeps/unix/sysv/linux/microblaze/le/*.abilist: New files.
2019-08-29arm: Split BE/LE abilistAdhemerval Zanella35-2/+3690
The fix for BZ#18231 requires new symbols only for armeb. This patch adds the required folder and files for both BE and LE abilist. No semantic changes are expected. Checked with check-abi for arm-linux-gnueabihf and armeb-linux-gnueabihf. * sysdeps/arm/preconfigure.ac: Set machine based on endianness. * sysdeps/arm/preconfigure: Regenerate. * sysdeps/arm/be/Implies: New file. * sysdeps/arm/be/armv6/Implies: Likewise. * sysdeps/arm/be/armv6t2/Implies: Likewise. * sysdeps/arm/be/armv7/Implies: Likewise. * sysdeps/arm/le/Implies: Likewise. * sysdeps/unix/sysv/linux/arm/be/Implies: Likewise. * sysdeps/unix/sysv/linux/arm/le/Implies: Likewise. * sysdeps/unix/sysv/linux/arm/*.abilist: Move to sysdeps/unix/sysv/linux/arm/le/*.abilist. * sysdeps/unix/sysv/linux/arm/be/l*.abilist: New files.
2019-08-28[powerpc] fegetenv_status: simplify instruction generationPaul A. Clarke1-15/+6
fegetenv_status() wants to use the lighter weight instruction 'mffsl' for reading the Floating-Point Status and Control Register (FPSCR). It currently will use it directly if compiled '-mcpu=power9', and will perform a runtime check (cpu_supports("arch_3_00")) otherwise. Nicely, it turns out that the 'mffsl' instruction will decode to 'mffs' on architectures older than "arch_3_00" because the additional bits set for 'mffsl' are "don't care" for 'mffs'. 'mffs' is a superset of 'mffsl'. So, just generate 'mffsl'.
2019-08-28[powerpc] fesetenv: optimize FPSCR accessPaul A. Clarke1-8/+4
fesetenv() reads the current value of the Floating-Point Status and Control Register (FPSCR) to determine the difference between the current state of exception enables and the newly requested state. All of these bits are also returned by the lighter weight 'mffsl' instruction used by fegetenv_status(). Use that instead. Also, remove a local macro _FPU_MASK_ALL in favor of a common macro, FPU_ENABLES_MASK from fenv_libc.h. Finally, use a local variable ('new') in favor of a pointer dereference ('*envp').
2019-08-28[powerpc] SET_RESTORE_ROUND improvementsPaul A. Clarke1-2/+36
SET_RESTORE_ROUND uses libc_feholdsetround_ppc_ctx and libc_feresetround_ppc_ctx to bracket a block of code where the floating point rounding mode must be set to a certain value. For the *prologue*, libc_feholdsetround_ppc_ctx is used and performs: 1. Read/save FPSCR. 2. Create new value for FPSCR with new rounding mode and enables cleared. 3. If new value is different than current value, a. If transitioning from a state where some exceptions enabled, enter "ignore exceptions / non-stop" mode. b. Write new value to FPSCR. c. Put a mark on the wall indicating the FPSCR was changed. (1) uses the 'mffs' instruction. On POWER9, the lighter weight 'mffsl' instruction can be used, but it doesn't return all of the bits in the FPSCR. fegetenv_status uses 'mffsl' on POWER9, 'mffs' otherwise, and can thus be used instead of fegetenv_register. (3b) uses 'mtfsf 0b11111111' to write the entire FPSCR, so it must instead use 'mtfsf 0b00000011' to write just the enables and the mode, because some of the rest of the bits are not valid if 'mffsl' was used. fesetenv_mode uses 'mtfsf 0b00000011' on POWER9, 'mtfsf 0b11111111' otherwise. For the *epilogue*, libc_feresetround_ppc_ctx checks the mark on the wall, then calls libc_feresetround_ppc, which just calls __libc_femergeenv_ppc with parameters such that it performs: 1. Retreive saved value of FPSCR, saved in prologue above. 2. Read FPSCR. 3. Create new value of FPSCR where: - Summary bits and exception indicators = current OR saved. - Rounding mode and enables = saved. - Status bits = current. 4. If transitioning from some exceptions enabled to none, enter "ignore exceptions / non-stop" mode. 5. If transitioning from no exceptions enabled to some, enter "catch exceptions" mode. 6. Write new value to FPSCR. The summary bits are hardwired to the exception indicators, so there is no need to restore any saved summary bits. The exception indicator bits, which are sticky and remain set unless explicitly cleared, would only need to be restored if the code block might explicitly clear any of them. This is certainly not expected. So, the only bits that need to be restored are the enables and the mode. If it is the case that only those bits are to be restored, there is no need to read the FPSCR. Steps (2) and (3) are unnecessary, and step (6) only needs to write the bits being restored. We know we are transitioning out of "ignore exceptions" mode, so step (4) is unnecessary, and in step (6), we only need to check the state we are entering.
2019-08-28[powerpc] fe{en,dis}ableexcept, fesetmode: optimize FPSCR accessesPaul A. Clarke4-24/+30
Since fe{en,dis}ableexcept() and fesetmode() read-modify-write just the "mode" (exception enable and rounding mode) bits of the Floating Point Status Control Register (FPSCR), the lighter weight 'mffsl' instruction can be used to read the FPSCR (enables and rounding mode), and 'mtfsf 0b00000011' can be used to write just those bits back to the FPSCR. The net is better performance. In addition, fe{en,dis}ableexcept() read the FPSCR again after writing it, or they determine that it doesn't need to be written because it is not changing. In either case, the local variable holds the current values of the enable bits in the FPSCR. This local variable can be used instead of again reading the FPSCR. Also, that value of the FPSCR which is read the second time is validated against the requested enables. Since the write can't fail, this validation step is unnecessary, and can be removed. Instead, the exceptions to be enabled (or disabled) are transformed into available bits in the FPSCR, then validated after being transformed back, to ensure that all requested bits are actually being set. For example, FE_INVALID_SQRT can be requested, but cannot actually be set. This bit is not mapped during the transformations, so a test for that bit being set before and after transformations will show the bit would not be set, and the function will return -1 for failure. Finally, convert the local macros in fesetmode.c to more generally useful macros in fenv_libc.h.
2019-08-28[powerpc] fe{en,dis}ableexcept optimize bit translationsPaul A. Clarke3-33/+63
The exceptions passed to fe{en,dis}ableexcept() are defined in the ABI as a bitmask, a combination of FE_INVALID, FE_OVERFLOW, etc. Within the functions, these bits must be translated to/from the corresponding enable bits in the Floating Point Status Control Register (FPSCR). This translation is currently done bit-by-bit. The compiler generates a series of conditional bit operations. Nicely, the "FE" exception bits are all a uniform offset from the FPSCR enable bits, so the bit-by-bit operation can instead be performed by a shift with appropriate masking.
2019-08-28nptl: Move pthread_attr_setdetachstate implementation into libcFlorian Weimer25-25/+0
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-23Don't put non-ASCII into installed headersPaul Eggert6-7/+2
Move non-ASCII contributor names from installed headers into contrib.texi when possible, and when it's not (the copyright notice in sysdeps/unix/sysv/linux/mips/sys/user.h) go back to ASCIIfied names. Problem reported by Joseph Myers in: https://www.sourceware.org/ml/libc-alpha/2019-08/msg00646.html
2019-08-23Fix spellings of contributor names in comments and docPaul Eggert18-19/+19
2019-08-23[MIPS] Raise highest supported EI_ABIVERSION value [BZ #24916]Mihailo Stojanovic4-1/+79
This bumps the highest valid EI_ABIVERSION value to ABSOLUTE ABI. New testcase loads the symbol from the GOT with the "lb" instruction so that the EI_ABIVERSION header field of the shared object is set to ABSOLUTE (it doesn't actually check the value of the symbol), and makes sure that the main executable is executed without "ABI version invalid" error. Tested for all three ABIs (o32, n32, n64) using both static linker which handles undefined weak symbols correctly [1] (and sets the EI_ABIVERSION of the test module) and the one that doesn't (EI_ABIVERSION left as 0). [1] https://sourceware.org/ml/binutils/2018-07/msg00268.html [BZ #24916] * sysdeps/mips/Makefile [$(subdir) = elf] (tests): Add tst-undefined-weak. [$(subdir) = elf] (modules-names): Add tst-undefined-weak-lib. [$(subdir) = elf] ($(objpfx)tst-undefined-weak): Add dependency. * sysdeps/mips/tst-undefined-weak-lib.S: New file. * sysdeps/mips/tst-undefined-weak.c: Likewise. * sysdeps/unix/sysv/linux/mips/ldsodefs.h (VALID_ELF_ABIVERSION): Increment highest valid ABIVERSION value.
2019-08-23mips: Force RWX stack for hard-float builds that can run on pre-4.8 kernelsDragan Mladjenovic3-5/+89
Linux/Mips kernels prior to 4.8 could potentially crash the user process when doing FPU emulation while running on non-executable user stack. Currently, gcc doesn't emit .note.GNU-stack for mips, but that will change in the future. To ensure that glibc can be used with such future gcc, without silently resulting in binaries that might crash in runtime, this patch forces RWX stack for all built objects if configured to run against minimum kernel version less than 4.8. * sysdeps/unix/sysv/linux/mips/Makefile (test-xfail-check-execstack): Move under mips-has-gnustack != yes. (CFLAGS-.o*, ASFLAGS-.o*): New rules. Apply -Wa,-execstack if mips-force-execstack == yes. * sysdeps/unix/sysv/linux/mips/configure: Regenerated. * sysdeps/unix/sysv/linux/mips/configure.ac (mips-force-execstack): New var. Set to yes for hard-float builds with minimum_kernel < 4.8.0 or minimum_kernel not set at all. (mips-has-gnustack): New var. Use value of libc_cv_as_noexecstack if mips-force-execstack != yes, otherwise set to no.
2019-08-23linux: Make profil_counter a compat_symbol (BZ#17726)Adhemerval Zanella2-2/+8
As indicated by Joseph's comment on BZ#17726, this symbol is most likely a historical ABI accident. This patch make it on both arm and sparc ABIs a compat_symbol. Checked against a build arm-linux-gnueabihf, sparcv9-linux-gnu, adn sparc64-linux-gnu to see if the symbol is still present. * gmon/Versions (libc) [GLIBC_2.31]: New entry. * sysdeps/unix/sysv/linux/arm/profil-counter.h (profil_counter): Make a compat_symbol. * sysdeps/unix/sysv/linux/sparc/profil-counter.h (__profil_counter_global): Likewise.
2019-08-23Refactor sigcontextinfo.hAdhemerval Zanella50-961/+880
This patch refactor sigcontextinfo.h header to use SA_SIGINFO as default for both gmon and debug implementations. This allows simplify profil-counter.h on Linux to use a single implementation and remove the requirements for newer ports to redefine __sigaction/sigaction to use SA_SIGINFO. The GET_PC macro is also replaced with a function sigcontext_get_pc that returns an uintptr_t instead of a void pointer. It allows easier convertion to integer on ILP32 architecture, such as x32, without the need to suppress compiler warnings. The patch also requires some refactor of register-dump.h file for some architectures (to reflect it is now called from a sa_sigaction instead of sa_handler signal context). - Alpha, i386, and s390 are straighfoward to take in consideration the new argument type. - ia64 takes in consideration the kernel pass a struct sigcontextt as third argument for sa_sigaction. - sparc take in consideration the kernel pass a pt_regs struct as third argument for sa_sigaction. - m68k dummy function is removed and the FP state is dumped on register_dump itself. - For SH the register-dump.h file is consolidate on a common implementation and the floating-point state is checked based on ownedfp field. The register_dump does not change its output format in any affected architecture. I checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, arm-linux-gnueabihf, sparcv9-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu, powerpc64-linux-gnu, and powerpc64le-linux-gnu. I also checked the libSegFault.so through catchsegv on alpha-linux-gnu, m68k-linux-gnu and sh4-linux-gnu to confirm the output has not changed. Adhemerval Zanella <adhemerval.zanella@linaro.org> Florian Weimer <fweimer@redhat.com> * debug/segfault.c (install_handler): Use SA_SIGINFO if defined. * sysdeps/generic/profil-counter.h (__profil_counter): Cast to uintptr_t. * sysdeps/generic/sigcontextinfo.h (GET_PC): Rename to sigcontext_get_pc and return aligned cast to uintptr_t. * sysdeps/mach/hurd/i386/sigcontextinfo.h (GET_PC): Likewise. * sysdeps/posix/profil.c (profil_count): Change PC argument to uintptr_t. (__profil): Use SA_SIGINFO. * sysdeps/posix/sprofil.c (profil_count): Change PCP argument to uintptr_t. (__sprofil): Use SA_SIGINFO. * sysdeps/unix/sysv/linux/profil-counter.h: New file. * sysdeps/unix/sysv/linux/aarch64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/csky/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/hppa/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/i386/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/ia64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/mips/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/nios2/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/sh/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/arm/profil-counter.h (__profil_counter): Assume SA_SIGINFO and use sigcontext_get_pc instead of GET_PC. * sysdeps/unix/sysv/linux/sparc/profil-counter.h: New file. * sysdeps/unix/sysv/linux/sparc/sparc64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/sparc/sparc32/profil-counter.h: Likewise. * sysdpes/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT, GET_PC, __sigaction, sigaction): Remove defines. (sigcontext_get_pc): New function. * sysdeps/unix/sysv/linux/alpha/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/csky/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/hppa/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/i386/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/mips/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/s390/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/riscv/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/sh/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc32/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/alpha/register-dump.h (register_dump): Handle CTX argument as ucontext_t. * sysdeps/unix/sysv/linux/i386/register-dump.h: Likewise. Likewise. * sysdeps/unix/sysv/linux/m68k/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sh/register-dump.h: New file. * sysdeps/unix/sysv/linux/sh/sh4/register-dump.h: Remove File. * sysdeps/unix/sysv/linux/sh/sh3/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/Makefile (tests-internal): Add tst-sigcontextinfo-get_pc. * sysdeps/unix/sysv/linux/tst-sigcontextinfo-get_pc.c: New file. (CFLAGS-tst-sigcontextinfo-get_pc.c): New rule.
2019-08-23Add RTLD_SINGLE_THREAD_P on generic single-thread.hAdhemerval Zanella1-0/+1
* sysdeps/generic/single-thread.h (RTLD_SINGLE_THREAD_P): Add definition.
2019-08-22powerpc: Fix typos and field name in commentsGustavo Romero1-4/+4
Fix a couple of typos and v_regs field name in mcontext_t. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Fix typos and field name in mcontext_t struct. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
2019-08-21Don't use the argument to time.Zack Weinberg1-2/+2
It doesn't make sense to remove all the internal uses of time. It's still a standard ISO C function, and its callers don't need sub-second resolution and would be unnecessarily complicated if they had to declare a struct timespec instead of just a time_t. However, a handful of places were using the vestigial "result" argument instead of the return value, which is slightly less efficient and also looks strange. Correct this. * misc/syslog.c (__vsyslog_internal) * time/getdate.c (__getdate_r) * time/tst_wcsftime.c (main): Use return value of time, not its argument. * string/strfry.c (strfry) * sysdeps/mach/sleep.c (__sleep): Remove unnecessary casts of NULL in calls to time.
2019-08-20Update i386 libm-test-ulpsAndreas Schwab1-2/+2
2019-08-19Do not print backtraces on fatal glibc errorsFlorian Weimer2-64/+4
If the process is in a bad state, we used to print backtraces in many cases. This is problematic because doing so could involve a lot of work, like loading libgcc_s using the dynamic linker, and this could itself be targeted by exploit writers. For example, if the crashing process was forked from a long-lived process, the addresses in the error message could be used to bypass ASLR. Commit ed421fca42fd9b4cab7c66e77894b8dd7ca57ed0 ("Avoid backtrace from __stack_chk_fail [BZ #12189]"), backtraces where no longer printed because backtrace_and_maps was always called with do_abort == 1. Rather than fixing this logic error, this change removes the backtrace functionality from the sources. With the prevalence of external crash handlers, it does not appear to be particularly useful. The crash handler may also destroy useful information for debugging. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-08-16nptl: Move pthread_attr_getdetachstate implementation into libcFlorian Weimer25-25/+0
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-08-15nptl: Move pthread_attr_init implementation into libcFlorian Weimer25-34/+0
Both the original GLIB_2.0 version and the current GLIBC_2.1 version need to be moved.
2019-08-15Make totalorder and totalordermag functions take pointer arguments.Joseph Myers43-52/+712
The resolution of C floating-point Clarification Request 25 <http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is that the totalorder and totalordermag functions should take pointer arguments, and this has been adopted in C2X (with const added; note that the integration of this change into C2X is present in the C standard git repository but postdates the most recent public PDF draft). This patch updates glibc accordingly. As a defect resolution, the API is changed unconditionally rather than supporting any sort of TS 18661-1 mode for compilation with the old version of the API. There are compat symbols for existing binaries that pass floating-point arguments directly. As a consequence of changing to pointer arguments, there are no longer type-generic macros in tgmath.h for these functions. Because of the fairly complicated logic for creating libm function aliases and determining the set of aliases to create in a given glibc configuration, rather than duplicating all that in individual source files to create the versioned and compat symbols, the source files for the various versions of totalorder functions are set up to redefine weak_alias before using libm_alias_* macros to create the symbols required. In turn, this requires creating a separate alias for each symbol version pointing to the same implementation (see binutils bug <https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is done automatically using __COUNTER__. (As I noted in <https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might well make sense for glibc's symbol versioning macros to do that alias creation with __COUNTER__ themselves, which would somewhat simplify the logic in the totalorder source files.) It is of course desirable to test the compat symbols. I did this with the generic libm-test machinery, but didn't wish to duplicate the actual tables of test inputs and outputs, and thought it risky to attempt to have a single object file refer to both default and compat versions of the same function in order to test them together. Thus, I created libm-test-compat_totalorder.inc and libm-test-compat_totalordermag.inc which include the generated .c files (with the processed version of those tables of inputs) from the non-compat tests, and added appropriate dependencies. I think this provides sufficient test coverage for the compat symbols without also needing to make the special ldbl-96 and ldbl-128ibm tests (of peculiarities relating to the representations of those formats that can't be covered in the generic tests) run for the compat symbols. Tests of compat symbols need to be internal tests, meaning _ISOMAC is not defined. Making some libm-test tests into internal tests showed up two other issues. GCC diagnoses duplicate macro definitions of __STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added an appropriate conditional and filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue. On ia64, include/setjmp.h ends up getting included indirectly from libm-symbols.h, resulting in conflicting definitions of the STR macro (also defined in libm-test-driver.c); I renamed the macros in include/setjmp.h. (It's arguable that we should have common internal headers used everywhere for stringizing and concatenation macros.) Tested for x86_64 and x86, and with build-many-glibcs.py. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalorder): Take pointer arguments. [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalordermag): Likewise. * manual/arith.texi (totalorder): Likewise. (totalorderf): Likewise. (totalorderl): Likewise. (totalorderfN): Likewise. (totalorderfNx): Likewise. (totalordermag): Likewise. (totalordermagf): Likewise. (totalordermagl): Likewise. (totalordermagfN): Likewise. (totalordermagfNx): Likewise. * math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise. * math/Versions (GLIBC_2.31): Add totalorder, totalorderf, totalorderl, totalordermag, totalordermagf, totalordermagl, totalorderf32, totalorderf64, totalorderf32x, totalordermagf32, totalordermagf64, totalordermagf32x, totalorderf64x, totalordermagf64x, totalorderf128 and totalordermagf128. * math/Makefile (libm-test-funcs-noauto): Add compat_totalorder and compat_totalordermag. (libm-test-funcs-compat): New variable. (libm-tests-compat): Likewise. (tests): Do not include compat tests. (tests-internal): Add compat tests. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalorder.o)): Depend on $(objpfx)libm-test-totalorder.c. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalordermag.o): Depend on $(objpfx)libm-test-totalordermag.c. (tgmath3-macros): Remove totalorder and totalordermag. * math/libm-test-compat_totalorder.inc: New file. * math/libm-test-compat_totalordermag.inc: Likewise. * math/libm-test-driver.c (struct test_ff_i_data): Update comment. (RUN_TEST_fpfp_b): New macro. (RUN_TEST_LOOP_fpfp_b): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Use TEST_fpfp_b. (totalorder_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Use TEST_fpfp_b. (totalordermag_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/gen-tgmath-tests.py (Tests.add_all_tests): Remove totalorder and totalordermag. * math/test-tgmath.c (NCALLS): Change to 132. (F(compile_test)): Do not call totalorder or totalordermag. (F(totalorder)): Remove. (F(totalordermag)): Likewise. * include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not define if [__STDC_WANT_IEC_60559_TYPES_EXT__]. * include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to SJSTR_HELPER. [!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER. [!_ISOMAC] (TEST_SIZE): Update call to STR. [!_ISOMAC] (TEST_ALIGN): Likewise. [!_ISOMAC] (TEST_OFFSET): Likewise. * sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/float128/float128_private.h (__totalorder_compatl): New macro. (__totalordermag_compatl): Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include <shlib-compat.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include <shlib-compat.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take pointer arguments. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl): Likewise. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/mach/hurd/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
2019-08-15login: Add nonstring attributes to struct utmp, struct utmpx [BZ #24899]Florian Weimer3-9/+18
Commit 7532837d7b03b3ca5b9a63d77a5bd81dd23f3d9c ("The -Wstringop-truncation option new in GCC 8 detects common misuses") added __attribute_nonstring__ to bits/utmp.h, but it did not update the parallel bits/utmpx.h header. In struct utmp, the nonstring attribute for ut_id was missing.
2019-08-15nptl: Remove pthread_self compatibility symbol from libpthreadFlorian Weimer22-22/+0
The symbol is no longer needed because since glibc 2.30, the dynamic loader continues searching for the symbol in libc.
2019-08-15nptl: Move pthread_attr_destroy implementation into libcFlorian Weimer25-25/+0
2019-08-15Update i386 libm-test-ulpsAndreas Schwab1-4/+4
2019-08-15nptl: Move pthread_equal implementation into libcFlorian Weimer25-25/+0
2019-08-14aarch64: Disable using DC ZVA in emag memsetFeng Xue2-7/+17
* sysdeps/aarch64/multiarch/memset_base64.S (DC_ZVA_THRESHOLD): Disable DC ZVA code if this macro is defined as zero. * sysdeps/aarch64/multiarch/memset_emag.S (DC_ZVA_THRESHOLD): Change to zero to disable using DC ZVA.
2019-08-13Declare most TS 18661-1 interfaces for C2X.Joseph Myers16-16/+16
C2X adds the interfaces from TS 18661-1, and all except a handful in Annex F are unconditionally visible in C2X rather than only visible when __STDC_WANT_IEC_60559_BFP_EXT__ is defined. This patch updates glibc headers accordingly: most uses of __GLIBC_USE (IEC_60559_BFP_EXT) are changed to a new __GLIBC_USE (IEC_60559_BFP_EXT_C2X). (Regarding totalorder and totalordermag, the type-generic macros in tgmath.h will go away when the functions are changed to take pointer arguments.) * bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): Update comment. (__GLIBC_USE_IEC_60559_BFP_EXT_C2X): New macro. * bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Change to [__GLIBC_USE (IEC_60559_BFP_EXT_C2X)]. * include/limits.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/bits/stdlib-ldbl.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdint.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * stdlib/stdlib.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/aarch64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/alpha/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/arm/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/csky/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/hppa/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/ia64/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/m68k/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/microblaze/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/mips/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/nios2/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/powerpc/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/riscv/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/s390/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sh/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/sparc/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * sysdeps/x86/fpu/bits/fenv.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder, totalordermag, getpayload, setpayload and setpayloadsig. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)]: Likewise, except for totalorder and totalordermag.
2019-08-13login: Assume that _HAVE_UT_* constants are trueFlorian Weimer2-148/+12
Make the GNU version of bits/utmp.h the generic version because all remaining ports use it (with a sysdeps override for Linux s390/s390x).
2019-08-07Add SYNC_FILE_RANGE_WRITE_AND_WAIT from Linux 5.2 to bits/fcntl-linux.h.Joseph Myers1-0/+5
This patch adds the SYNC_FILE_RANGE_WRITE_AND_WAIT constant from Linux 5.2 (a new name for a combination of existing bits, not actually a new kernel interface) to bits/fcntl-linux.h. Tested for x86_64. * sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_GNU] (SYNC_FILE_RANGE_WRITE_AND_WAIT): New macro.
2019-08-06s390: Fix Enable VDSO for static linkingStefan Liebler1-0/+2
The commit 5e855c8954014bca7b0d6f07312ec09553695ffd "s390: Enable VDSO for static linking" removed the definition of VDSO_SETUP which leads to not setup the vdso symbols. Instead it jumps to false addresses. This patch just re adds the removed VDSO_SETUP macro definition. ChangeLog: * sysdeps/unix/sysv/linux/s390/init-first.c (VDSO_SETUP): New define.
2019-08-05Add CLONE_PIDFD from Linux 5.2 to bits/sched.h.Joseph Myers1-0/+2
This patch adds the CLONE_PIDFD constant from Linux 5.2 to glibc's bits/sched.h. Tested for x86_64. * sysdeps/unix/sysv/linux/bits/sched.h [__USE_GNU] (CLONE_PIDFD): New macro.
2019-08-05linux: Enable vDSO for static linking as default (BZ#19767)Adhemerval Zanella16-52/+2
This patch assumes static vDSO is supported as default, it is now supported on all current architectures that support vDSO. It allows removing both ALWAYS_USE_VSYSCALL define, which an architecture requires to explicit define and USE_VSYSCALL (which defines vDSO only for shared or if architecture defines ALWAYS_USE_VSYSCALL). Checked with a build against all affected ABIs. [BZ #19767] * sysdeps/unix/sysv/linux/aarch64/sysdep.h (ALWAYS_USE_VSYSCALL): Remove definition. * sysdeps/unix/sysv/linux/arm/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/i386/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/riscv/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/sparc/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/x86/libc-vdso.h: Remove #if USE_VSYSCALL. * sysdeps/unix/sysv/linux/sysdep-vdso.h: Likewise. * sysdeps/unix/sysv/linux/sysdep.h (ALWAYS_USE_VSYSCALL, USE_VSYSCALL): Remove defitions.
2019-08-05sparc: Enable VDSO for static linkingAdhemerval Zanella3-10/+7
Checked on sparc64-linux-gnu and sparcv9-linux-gnu. [BZ #19767] * sysdeps/unix/sysv/linux/sparc/init-first.c: Remove #ifdef SHARED. * sysdeps/unix/sysv/linux/sparc/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sysdep.h (ALWAYS_USE_VSYSCALL): Define.
2019-08-05s390: Enable VDSO for static linkingAdhemerval Zanella4-9/+8
Although s390 only enables vDSO for dynamically linked elf binaries (arch/s390/kernel/vdso.c:217), there is no indication in the code or associated commit message for why not enable it for statically linked binaries as well. To double check, I rebuilt a kernel with the check removed and the vDSO does work for static build for supplied symbols. Checked on s390x-linux-gnu and s390-linux-gnu. [BZ #19767] * sysdeps/unix/sysv/linux/s390/init-first.c: Remove #ifdef SHARED. * sysdeps/unix/sysv/linux/s390/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h (ALWAYS_USE_VSYSCALL): Define. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h (ALWAYS_USE_VSYSCALL): Likewise.
2019-08-05riscv: Enable VDSO for static linkingAdhemerval Zanella3-10/+7
Checked on riscv64-linux-gnu-rv64imafdc-lp64d qemu system with some static tests. [BZ #19767] * sysdeps/unix/sysv/linux/riscv/init-first.c: Remove #ifdef SHARED. * sysdeps/unix/sysv/linux/riscv/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/riscv/sysdep.h (ALWAYS_USE_VSYSCALL): Define.
2019-08-05sh: Update libm-tests-ulpsAdhemerval Zanella1-20/+20
The make regen-ulps was done on a SH7785LCR. * sysdeps/sh/libm-test-ulps: Update.
2019-08-05login: Remove utmp backend jump tables [BZ #23518]Florian Weimer1-4/+3
There is just one file-based implementation, so this dispatch mechanism is unnecessary. Instead of the vtable pointer __libc_utmp_jump_table, use a non-negative file_fd as the indicator that the backend is initialized.
2019-08-02Update kernel version in comment in syscall-names.list.Joseph Myers1-1/+1
This patch updates the Linux kernel version in a comment in syscall-names.list to agree with the following "kernel" line. * sysdeps/unix/sysv/linux/syscall-names.list: Update comment.
2019-08-02Update Linux kernel version number in tst-mman-consts.py to 5.2.Joseph Myers1-1/+1
The tst-mman-consts.py test includes a kernel version number, to avoid failures because of newly added constants in the kernel (if kernel headers are newer than this version of glibc) or missing constants in the kernel (if kernel headers are older than this version of glibc). This patch updates it to 5.2 to reflect that the MAP_* constants in glibc are still current as of that kernel version. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/tst-mman-consts.py (main): Update Linux kernel version number to 5.2.
2019-08-01powerpc: Cleanup: use actual power8 assembly mnemonicsRaoni Fassina Firmino11-187/+87
Some implementations in sysdeps/powerpc/powerpc64/power8/*.S still had pre power8 compatible binutils hardcoded macros and were not using .machine power8. This patch should not have semantic changes, in fact it should have the same exact code generated. Tested that generated stripped shared objects are identical when using "strip --remove-section=.note.gnu.build-id". Checked on: - powerpc64le, power9, build-many-glibcs.py, gcc 6.4.1 20180104, binutils 2.26.2.20160726 - powerpc64le, power8, debian 9, gcc 6.3.0 20170516, binutils 2.28 - powerpc64le, power9, ubuntu 19.04, gcc 8.3.0, binutils 2.32 - powerpc64le, power9, opensuse tumbleweed, gcc 9.1.1 20190527, binutils 2.32 - powerpc64, power9, debian 10, gcc 8.3.0, binutils 2.31.1 Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Reviewed-by: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
2019-08-01hppa: Update libm-tests-ulpsAdhemerval Zanella1-44/+44
The make regen-ulps was done on a PA8900 with 8.3.0. * sysdeps/hppa/fpu/libm-test-ulps: Update.
2019-08-01Get new entropy on each attempt __gen_tempname (BZ #15813)Adhemerval Zanella1-7/+6
This is missing bit for fully fix BZ#15813 (the other two were fixed by 359653aaacad463). Checked on x86_64-linux-gnu. [BZ #15813] sysdeps/posix/tempname.c (__gen_tempname): get entrypy on each attempt.
2019-07-30Restore r31 setting in powerpc32 swapcontext.Joseph Myers1-0/+3
Commit ffe8a9a8318e1db225b22da8bc067408494bac5c, "powerpc: Remove rt_sigreturn usage on context function", removed from powerpc32 swapcontext a setting of r31 that is relied upon in subsequent code. I'm not sure why this didn't produce test failures in Adhemerval's 32-bit testing; in my (soft-float) testing in preparation for 2.30 release, I see several context-related failures FAIL: stdlib/tst-makecontext2 FAIL: stdlib/tst-makecontext3 FAIL: stdlib/tst-setcontext FAIL: stdlib/tst-setcontext2 FAIL: stdlib/tst-setcontext4 FAIL: stdlib/tst-setcontext7 FAIL: stdlib/tst-setcontext9 FAIL: stdlib/tst-swapcontext1 that did not appear in 2.29 testing. This patch restores the removed register setting in question, and thus fixes those failures. Tested for powerpc (soft-float). * sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S (__CONTEXT_FUNC_NAME): Restore setting of r31.
2019-07-29Linux: Move getdents64 to <dirent.h>Florian Weimer2-6/+33
This matches the location of the declaration in musl. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-07-24x86-64: Compile branred.c with -mprefer-vector-width=128 [BZ #24603]H.J. Lu3-0/+43
When compiled with -O3 and AVX, GCC 8 and 9 optimize some loops in sysdeps/ieee754/dbl-64/branred.c with 256-bit vector instructions, which leads to store forward stall: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90579 There is no easy fix in compiler. This patch limits vector width to 128 bits to work around this issue. It improves performance of sin and cos by more than 40% on Skylake compiled with -O3 -march=skylake. Tested with GCC 7/8/9 on x86-64. [BZ #24603] * sysdeps/x86_64/configure.ac: Check if -mprefer-vector-width=128 works. * sysdeps/x86_64/configure: Regenerated. * sysdeps/x86_64/fpu/Makefile (CFLAGS-branred.c): New. Set to -mprefer-vector-width=128 if supported.
2019-07-24Linux: Use in-tree copy of SO_ constants for !__USE_MISC [BZ #24532]Florian Weimer9-94/+311
The kernel changes for a 64-bit time_t on 32-bit architectures resulted in <asm/socket.h> indirectly including <linux/posix_types.h>. The latter is not namespace-clean for the POSIX version of <sys/socket.h>. This issue has persisted across several Linux releases, so this commit creates our own copy of the SO_* definitions for !__USE_MISC mode. The new test socket/tst-socket-consts ensures that the copy is consistent with the kernel definitions (which vary across architectures). The test is tricky to get right because CPPFLAGS includes include/libc-symbols.h, which in turn defines _GNU_SOURCE unconditionally. Tested with build-many-glibcs.py. I verified that a discrepancy in the definitions actually results in a failure of the socket/tst-socket-consts test.
generated by cgit v1.1 at 2024-12-02 06:10:54 +0000