aboutsummaryrefslogtreecommitdiff
path: root/sysdeps/x86_64/multiarch
AgeCommit message (Collapse)AuthorFilesLines
2019-09-07Prefer https to http for gnu.org and fsf.org URLsPaul Eggert123-123/+123
Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
2019-02-27wcsmbs: optimize wcscatAdhemerval Zanella2-5/+10
This patch rewrites wcscat using wcslen and wcscpy. This is similar to the optimization done on strcat by 6e46de42fe. The strcpy changes are mainly to add the internal alias to avoid PLT calls. Checked on x86_64-linux-gnu and a build against the affected architectures. * include/wchar.h (__wcscpy): New prototype. * sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy-ppc32.c (__wcscpy): Route internal symbol to generic implementation. * sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy.c (wcscpy): Add internal __wcscpy alias. * sysdeps/powerpc/powerpc64/multiarch/wcscpy.c (wcscpy): Likewise. * sysdeps/s390/wcscpy.c (wcscpy): Likewise. * sysdeps/x86_64/multiarch/wcscpy.c (wcscpy): Likewise. * wcsmbs/wcscpy.c (wcscpy): Add * sysdeps/x86_64/multiarch/wcscpy-c.c (WCSCPY): Adjust macro to use generic implementation. * wcsmbs/wcscat.c (wcscat): Rewrite using wcslen and wcscpy.
2019-02-04Fix handling of collating elements in fnmatch (bug 17396, bug 16976)Andreas Schwab1-1/+2
This fixes the same bug in fnmatch that was fixed by commit 7e2f0d2d77 for regexp matching. As a side effect it also removes the use of an unbound VLA.
2019-01-21x86-64 strnlen/wcsnlen: Properly handle the length parameter [BZ# 24097]H.J. Lu1-3/+6
On x32, the size_t parameter may be passed in the lower 32 bits of a 64-bit register with the non-zero upper 32 bits. The string/memory functions written in assembly can only use the lower 32 bits of a 64-bit register as length or must clear the upper 32 bits before using the full 64-bit register for length. This pach fixes strnlen/wcsnlen for x32. Tested on x86-64 and x32. On x86-64, libc.so is the same with and withou the fix. [BZ# 24097] CVE-2019-6488 * sysdeps/x86_64/multiarch/strlen-avx2.S: Use RSI_LP for length. Clear the upper 32 bits of RSI register. * sysdeps/x86_64/strlen.S: Use RSI_LP for length. * sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-strnlen and tst-size_t-wcsnlen. * sysdeps/x86_64/x32/tst-size_t-strnlen.c: New file. * sysdeps/x86_64/x32/tst-size_t-wcsnlen.c: Likewise.
2019-01-21x86-64 strncpy: Properly handle the length parameter [BZ# 24097]H.J. Lu3-7/+7
On x32, the size_t parameter may be passed in the lower 32 bits of a 64-bit register with the non-zero upper 32 bits. The string/memory functions written in assembly can only use the lower 32 bits of a 64-bit register as length or must clear the upper 32 bits before using the full 64-bit register for length. This pach fixes strncpy for x32. Tested on x86-64 and x32. On x86-64, libc.so is the same with and withou the fix. [BZ# 24097] CVE-2019-6488 * sysdeps/x86_64/multiarch/strcpy-avx2.S: Use RDX_LP for length. * sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/strcpy-ssse3.S: Likewise. * sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-strncpy. * sysdeps/x86_64/x32/tst-size_t-strncpy.c: New file.
2019-01-21x86-64 strncmp family: Properly handle the length parameter [BZ# 24097]H.J. Lu2-6/+6
On x32, the size_t parameter may be passed in the lower 32 bits of a 64-bit register with the non-zero upper 32 bits. The string/memory functions written in assembly can only use the lower 32 bits of a 64-bit register as length or must clear the upper 32 bits before using the full 64-bit register for length. This pach fixes the strncmp family for x32. Tested on x86-64 and x32. On x86-64, libc.so is the same with and withou the fix. [BZ# 24097] CVE-2019-6488 * sysdeps/x86_64/multiarch/strcmp-avx2.S: Use RDX_LP for length. * sysdeps/x86_64/multiarch/strcmp-sse42.S: Likewise. * sysdeps/x86_64/strcmp.S: Likewise. * sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-strncasecmp, tst-size_t-strncmp and tst-size_t-wcsncmp. * sysdeps/x86_64/x32/tst-size_t-strncasecmp.c: New file. * sysdeps/x86_64/x32/tst-size_t-strncmp.c: Likewise. * sysdeps/x86_64/x32/tst-size_t-wcsncmp.c: Likewise.
2019-01-21x86-64 memset/wmemset: Properly handle the length parameter [BZ# 24097]H.J. Lu2-14/+26
On x32, the size_t parameter may be passed in the lower 32 bits of a 64-bit register with the non-zero upper 32 bits. The string/memory functions written in assembly can only use the lower 32 bits of a 64-bit register as length or must clear the upper 32 bits before using the full 64-bit register for length. This pach fixes memset/wmemset for x32. Tested on x86-64 and x32. On x86-64, libc.so is the same with and withou the fix. [BZ# 24097] CVE-2019-6488 * sysdeps/x86_64/multiarch/memset-avx512-no-vzeroupper.S: Use RDX_LP for length. Clear the upper 32 bits of RDX register. * sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S: Likewise. * sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-wmemset. * sysdeps/x86_64/x32/tst-size_t-memset.c: New file. * sysdeps/x86_64/x32/tst-size_t-wmemset.c: Likewise.
2019-01-21x86-64 memrchr: Properly handle the length parameter [BZ# 24097]H.J. Lu1-2/+2
On x32, the size_t parameter may be passed in the lower 32 bits of a 64-bit register with the non-zero upper 32 bits. The string/memory functions written in assembly can only use the lower 32 bits of a 64-bit register as length or must clear the upper 32 bits before using the full 64-bit register for length. This pach fixes memrchr for x32. Tested on x86-64 and x32. On x86-64, libc.so is the same with and withou the fix. [BZ# 24097] CVE-2019-6488 * sysdeps/x86_64/memrchr.S: Use RDX_LP for length. * sysdeps/x86_64/multiarch/memrchr-avx2.S: Likewise. * sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memrchr. * sysdeps/x86_64/x32/tst-size_t-memrchr.c: New file.
2019-01-21x86-64 memcpy: Properly handle the length parameter [BZ# 24097]H.J. Lu4-41/+63
On x32, the size_t parameter may be passed in the lower 32 bits of a 64-bit register with the non-zero upper 32 bits. The string/memory functions written in assembly can only use the lower 32 bits of a 64-bit register as length or must clear the upper 32 bits before using the full 64-bit register for length. This pach fixes memcpy for x32. Tested on x86-64 and x32. On x86-64, libc.so is the same with and withou the fix. [BZ# 24097] CVE-2019-6488 * sysdeps/x86_64/multiarch/memcpy-ssse3-back.S: Use RDX_LP for length. Clear the upper 32 bits of RDX register. * sysdeps/x86_64/multiarch/memcpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/memmove-avx512-no-vzeroupper.S: Likewise. * sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S: Likewise. * sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memcpy. tst-size_t-wmemchr. * sysdeps/x86_64/x32/tst-size_t-memcpy.c: New file.
2019-01-21x86-64 memcmp/wmemcmp: Properly handle the length parameter [BZ# 24097]H.J. Lu3-7/+16
On x32, the size_t parameter may be passed in the lower 32 bits of a 64-bit register with the non-zero upper 32 bits. The string/memory functions written in assembly can only use the lower 32 bits of a 64-bit register as length or must clear the upper 32 bits before using the full 64-bit register for length. This pach fixes memcmp/wmemcmp for x32. Tested on x86-64 and x32. On x86-64, libc.so is the same with and withou the fix. [BZ# 24097] CVE-2019-6488 * sysdeps/x86_64/multiarch/memcmp-avx2-movbe.S: Use RDX_LP for length. Clear the upper 32 bits of RDX register. * sysdeps/x86_64/multiarch/memcmp-sse4.S: Likewise. * sysdeps/x86_64/multiarch/memcmp-ssse3.S: Likewise. * sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memcmp and tst-size_t-wmemcmp. * sysdeps/x86_64/x32/tst-size_t-memcmp.c: New file. * sysdeps/x86_64/x32/tst-size_t-wmemcmp.c: Likewise.
2019-01-21x86-64 memchr/wmemchr: Properly handle the length parameter [BZ# 24097]H.J. Lu1-2/+6
On x32, the size_t parameter may be passed in the lower 32 bits of a 64-bit register with the non-zero upper 32 bits. The string/memory functions written in assembly can only use the lower 32 bits of a 64-bit register as length or must clear the upper 32 bits before using the full 64-bit register for length. This pach fixes memchr/wmemchr for x32. Tested on x86-64 and x32. On x86-64, libc.so is the same with and withou the fix. [BZ# 24097] CVE-2019-6488 * sysdeps/x86_64/memchr.S: Use RDX_LP for length. Clear the upper 32 bits of RDX register. * sysdeps/x86_64/multiarch/memchr-avx2.S: Likewise. * sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memchr and tst-size_t-wmemchr. * sysdeps/x86_64/x32/test-size_t.h: New file. * sysdeps/x86_64/x32/tst-size_t-memchr.c: Likewise. * sysdeps/x86_64/x32/tst-size_t-wmemchr.c: Likewise.
2019-01-14x86-64: Optimize strcat/strncat, strcpy/strncpy and stpcpy/stpncpy with AVX2Leonardo Sandoval15-6/+1337
Optimize x86-64 strcat/strncat, strcpy/strncpy and stpcpy/stpncpy with AVX2. It uses vector comparison as much as possible. In general, the larger the source string, the greater performance gain observed, reaching speedups of 1.6x compared to SSE2 unaligned routines. Select AVX2 strcat/strncat, strcpy/strncpy and stpcpy/stpncpy on AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add strcat-avx2, strncat-avx2, strcpy-avx2, strncpy-avx2, stpcpy-avx2 and stpncpy-avx2. * sysdeps/x86_64/multiarch/ifunc-impl-list.c: (__libc_ifunc_impl_list): Add tests for __strcat_avx2, __strncat_avx2, __strcpy_avx2, __strncpy_avx2, __stpcpy_avx2 and __stpncpy_avx2. * sysdeps/x86_64/multiarch/{ifunc-unaligned-ssse3.h => ifunc-strcpy.h}: rename header for a more generic name. * sysdeps/x86_64/multiarch/ifunc-strcpy.h: (IFUNC_SELECTOR): Return OPTIMIZE (avx2) on AVX 2 machines if AVX unaligned load is fast and vzeroupper is preferred. * sysdeps/x86_64/multiarch/stpcpy-avx2.S: New file * sysdeps/x86_64/multiarch/stpncpy-avx2.S: Likewise * sysdeps/x86_64/multiarch/strcat-avx2.S: Likewise * sysdeps/x86_64/multiarch/strcpy-avx2.S: Likewise * sysdeps/x86_64/multiarch/strncat-avx2.S: Likewise * sysdeps/x86_64/multiarch/strncpy-avx2.S: Likewise
2019-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers121-121/+121
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2018-12-03x86: Extend CPUID support in struct cpu_featuresH.J. Lu2-3/+3
Extend CPUID support for all feature bits from CPUID. Add a new macro, CPU_FEATURE_USABLE, which can be used to check if a feature is usable at run-time, instead of HAS_CPU_FEATURE and HAS_ARCH_FEATURE. Add COMMON_CPUID_INDEX_D_ECX_1, COMMON_CPUID_INDEX_80000007 and COMMON_CPUID_INDEX_80000008 to check CPU feature bits in them. Tested on i686 and x86-64 as well as using build-many-glibcs.py with x86 targets. * sysdeps/x86/cacheinfo.c (intel_check_word): Updated for cpu_features_basic. (__cache_sysconf): Likewise. (init_cacheinfo): Likewise. * sysdeps/x86/cpu-features.c (get_extended_indeces): Also populate COMMON_CPUID_INDEX_80000007 and COMMON_CPUID_INDEX_80000008. (get_common_indices): Also populate COMMON_CPUID_INDEX_D_ECX_1. Use CPU_FEATURES_CPU_P (cpu_features, XSAVEC) to check if XSAVEC is available. Set the bit_arch_XXX_Usable bits. (init_cpu_features): Use _Static_assert on index_arch_Fast_Unaligned_Load. __get_cpuid_registers and __get_arch_feature. Updated for cpu_features_basic. Set stepping in cpu_features. * sysdeps/x86/cpu-features.h: (FEATURE_INDEX_1): Changed to enum. (FEATURE_INDEX_2): New. (FEATURE_INDEX_MAX): Changed to enum. (COMMON_CPUID_INDEX_D_ECX_1): New. (COMMON_CPUID_INDEX_80000007): Likewise. (COMMON_CPUID_INDEX_80000008): Likewise. (cpuid_registers): Likewise. (cpu_features_basic): Likewise. (CPU_FEATURE_USABLE): Likewise. (bit_arch_XXX_Usable): Likewise. (cpu_features): Use cpuid_registers and cpu_features_basic. (bit_arch_XXX): Reweritten. (bit_cpu_XXX): Likewise. (index_cpu_XXX): Likewise. (reg_XXX): Likewise. * sysdeps/x86/tst-get-cpu-features.c: Include <stdio.h> and <support/check.h>. (CHECK_CPU_FEATURE): New. (CHECK_CPU_FEATURE_USABLE): Likewise. (cpu_kinds): Likewise. (do_test): Print vendor, family, model and stepping. Check HAS_CPU_FEATURE and CPU_FEATURE_USABLE. (TEST_FUNCTION): Removed. Include <support/test-driver.c> instead of "../../test-skeleton.c". * sysdeps/x86_64/multiarch/sched_cpucount.c (__sched_cpucount): Check POPCNT instead of POPCOUNT. * sysdeps/x86_64/multiarch/test-multiarch.c (do_test): Likewise.
2018-11-09Add support for GCC 9 attribute copy.Martin Sebor18-21/+21
GCC 9 has gained an enhancement to help detect attribute mismatches between alias declarations and their targets. It consists of a new warning, -Wattribute-alias, an enhancement to an existing warning, -Wmissing-attributes, and a new attribute called copy. The purpose of the warnings is to help identify either possible bugs (an alias declared with more restrictive attributes than its target promises) or optimization or diagnostic opportunities (an alias target missing some attributes that it could be declared with that might benefit analysis and code generation). The purpose of the new attribute is to easily apply (almost) the same set of attributes to one declaration as those already present on another. As expected (and intended) the enhancement triggers warnings for many alias declarations in Glibc code. This change, tested on x86_64-linux, avoids all instances of the new warnings by making use of the attribute where appropriate. To fully benefit from the enhancement Glibc will need to be compiled with -Wattribute-alias=2 and remaining warnings reviewed and dealt with (there are a couple of thousand but most should be straightforward to deal with). ChangeLog: * include/libc-symbols.h (__attribute_copy__): Define macro unless it's already defined. (_strong_alias): Use __attribute_copy__. (_weak_alias, __hidden_ver1, __hidden_nolink2): Same. * misc/sys/cdefs.h (__attribute_copy__): New macro. * sysdeps/x86_64/multiarch/memchr.c (memchr): Use __attribute_copy__. * sysdeps/x86_64/multiarch/memcmp.c (memcmp): Same. * sysdeps/x86_64/multiarch/mempcpy.c (mempcpy): Same. * sysdeps/x86_64/multiarch/memset.c (memset): Same. * sysdeps/x86_64/multiarch/stpcpy.c (stpcpy): Same. * sysdeps/x86_64/multiarch/strcat.c (strcat): Same. * sysdeps/x86_64/multiarch/strchr.c (strchr): Same. * sysdeps/x86_64/multiarch/strcmp.c (strcmp): Same. * sysdeps/x86_64/multiarch/strcpy.c (strcpy): Same. * sysdeps/x86_64/multiarch/strcspn.c (strcspn): Same. * sysdeps/x86_64/multiarch/strlen.c (strlen): Same. * sysdeps/x86_64/multiarch/strncmp.c (strncmp): Same. * sysdeps/x86_64/multiarch/strncpy.c (strncpy): Same. * sysdeps/x86_64/multiarch/strnlen.c (strnlen): Same. * sysdeps/x86_64/multiarch/strpbrk.c (strpbrk): Same. * sysdeps/x86_64/multiarch/strrchr.c (strrchr): Same. * sysdeps/x86_64/multiarch/strspn.c (strspn): Same.
2018-08-03x86: Don't include <init-arch.h> in assembly codesH.J. Lu1-1/+0
There is no need to include <init-arch.h> in assembly codes since all x86 IFUNC selector functions are written in C. Tested on i686 and x86-64. There is no code change in libc.so, ld.so and libmvec.so. * sysdeps/i386/i686/multiarch/bzero-ia32.S: Don't include <init-arch.h>. * sysdeps/x86_64/fpu/multiarch/svml_d_sin8_core-avx2.S: Likewise. * sysdeps/x86_64/fpu/multiarch/svml_s_expf16_core-avx2.S: Likewise. * sysdeps/x86_64/multiarch/memset-sse2-unaligned-erms.S: Likewise.
2018-07-18x86-64: Use _CET_NOTRACK in memcmp-sse4.SH.J. Lu1-1/+1
* sysdeps/x86_64/multiarch/memcmp-sse4.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table.
2018-07-18x86-64: Use _CET_NOTRACK in memcpy-ssse3.SH.J. Lu1-62/+62
* sysdeps/x86_64/multiarch/memcpy-ssse3.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table. (MEMCPY): Likewise.
2018-07-18x86-64: Use _CET_NOTRACK in memcpy-ssse3-back.SH.J. Lu1-3/+3
* sysdeps/x86_64/multiarch/memcpy-ssse3-back.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table. (MEMCPY): Likewise.
2018-07-18x86-64: Use _CET_NOTRACK in strcmp-sse42.SH.J. Lu1-1/+1
* sysdeps/x86_64/multiarch/strcmp-sse42.S (STRCMP_SSE42): Add _CET_NOTRACK before indirect jump to jump table.
2018-07-18x86-64: Use _CET_NOTRACK in strcpy-sse2-unaligned.SH.J. Lu1-1/+1
* sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S (BRANCH_TO_JMPTBL_ENTRY): Add _CET_NOTRACK before indirect jump to jump table.
2018-07-17x86-64: Add _CET_ENDBR to STRCMP_SSE42H.J. Lu1-0/+1
Add _CET_ENDBR to STRCMP_SSE42, which is called indirectly, to support IBT. Reviewed-by: Carlos O'Donell <carlos@redhat.com> * sysdeps/x86_64/multiarch/strcmp-sse42.S (STRCMP_SSE42): Add _CET_ENDBR.
2018-06-12x86: Make strncmp usable from rtldFlorian Weimer1-4/+7
Due to the way the conditions were written, the rtld build of strncmp ended up with no definition of the strncmp symbol at all: The implementations were renamed for use within an IFUNC resolver, but the IFUNC resolver itself was missing (because rtld does not use IFUNCs). Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2018-06-01x86-64: Optimize strcmp/wcscmp and strncmp/wcsncmp with AVX2Leonardo Sandoval12-2/+1006
Optimize x86-64 strcmp/wcscmp and strncmp/wcsncmp with AVX2. It uses vector comparison as much as possible. Peak performance observed on a SkyLake machine: 9x, 3x, 2.5x and 5.5x for strcmp, strncmp, wcscmp and wcsncmp, respectively. The larger the comparison length, the more benefit using avx2 functions, except on the strcmp, where peak is observed at length == 32 bytes. Select AVX2 strcmp/wcscmp on AVX2 machines where vzeroupper is preferred and AVX unaligned load is fast. NB: It uses TZCNT instead of BSF since TZCNT produces the same result as BSF for non-zero input. TZCNT is faster than BSF and is executed as BSF if machine doesn't support TZCNT. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add strcmp-avx2, strncmp-avx2, wcscmp-avx2, wcscmp-sse2, wcsncmp-avx2 and wcsncmp-sse2. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Add tests for __strcmp_avx2, __strncmp_avx2, __wcscmp_avx2, __wcsncmp_avx2, __wcscmp_sse2 and __wcsncmp_sse2. * sysdeps/x86_64/multiarch/strcmp.c (OPTIMIZE (avx2)): (IFUNC_SELECTOR): Return OPTIMIZE (avx2) on AVX 2 machines if AVX unaligned load is fast and vzeroupper is preferred. * sysdeps/x86_64/multiarch/strncmp.c: Likewise. * sysdeps/x86_64/multiarch/strcmp-avx2.S: New file. * sysdeps/x86_64/multiarch/strncmp-avx2.S: Likewise. * sysdeps/x86_64/multiarch/wcscmp-avx2.S: Likewise. * sysdeps/x86_64/multiarch/wcscmp-sse2.S: Likewise. * sysdeps/x86_64/multiarch/wcscmp.c: Likewise. * sysdeps/x86_64/multiarch/wcsncmp-avx2.S: Likewise. * sysdeps/x86_64/multiarch/wcsncmp-sse2.c: Likewise. * sysdeps/x86_64/multiarch/wcsncmp.c: Likewise. * sysdeps/x86_64/wcscmp.S (__wcscmp): Add alias only if __wcscmp is undefined.
2018-05-23x86-64: Skip zero length in __mem[pcpy|move|set]_ermsH.J. Lu2-0/+11
This patch skips zero length in __mempcpy_erms, __memmove_erms and __memset_erms. Tested on x86-64. * sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S (__mempcpy_erms): Skip zero length. (__memmove_erms): Likewise. * sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S (__memset_erms): Likewise.
2018-05-23Don't write beyond destination in __mempcpy_avx512_no_vzeroupper (bug 23196)Andreas Schwab1-2/+3
When compiled as mempcpy, the return value is the end of the destination buffer, thus it cannot be used to refer to the start of it.
2018-05-21x86-64: Check Prefer_FSRM in ifunc-memmove.hH.J. Lu1-1/+2
Although the REP MOVSB implementations of memmove, memcpy and mempcpy aren't used by the current processors, this patch adds Prefer_FSRM check in ifunc-memmove.h so that they can be used in the future. * sysdeps/x86/cpu-features.h (bit_arch_Prefer_FSRM): New. (index_arch_Prefer_FSRM): Likewise. * sysdeps/x86/cpu-tunables.c (TUNABLE_CALLBACK (set_hwcaps)): Also check Prefer_FSRM. * sysdeps/x86_64/multiarch/ifunc-memmove.h (IFUNC_SELECTOR): Also return OPTIMIZE (erms) for Prefer_FSRM.
2018-05-17x86-64: remove duplicate line on PREFETCH_ONE_SET macroLeonardo Sandoval1-1/+0
Tested on 64-bit AVX machine * sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S (PREFETCH_ONE_SET): Remove duplicate line
2018-05-16x86-64: Use IFUNC strncat inside libc.soH.J. Lu2-2/+6
Unlike i386, we can call hidden IFUNC functions inside libc.so since x86-64 PLT is always PIC. Tested on x86-64. * sysdeps/x86_64/multiarch/strncat-c.c (STRNCAT_PRIMARY): Removed. Include <string/strncat.c>. * sysdeps/x86_64/multiarch/strncat.c (__strncat): New strong alias. (__GI___strncat): New hidden alias.
2018-05-14x86-64: Remove the unnecessary testl in strlen-avx2.SH.J. Lu1-1/+0
Since the result of testl is never used, this patch removes it. Tested on 64-bit AVX2 machine. * sysdeps/x86_64/multiarch/strlen-avx2.S (STRLEN): Remove the unnecessary testl.
2018-05-07x86-64/memset: Mark the debugger symbol as hiddenH.J. Lu1-1/+2
When MEMSET_SYMBOL (__memset, erms) is provided for debugger, mark it as hidden so that it will be local to the library. * sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S (MEMSET_SYMBOL (__memset, erms)): Mark the debugger symbol as hidden.
2018-01-01Update copyright dates with scripts/update-copyrights.Joseph Myers116-116/+116
* All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
2017-09-06Remove remaining _HAVE_STRING_ARCH_* definitions (BZ #18858)Adhemerval Zanella6-6/+0
Since the removal of bits/string.h, _HAVE_STRING_ARCH_* are no longer used. This patch removes the unused macros from i686 and x86_64 sysdeps folder. Checked on x86_64-linux-gnu and i686-linux-gnu. * sysdeps/i386/i686/multiarch/strncpy.c (_HAVE_STRING_ARCH_strncpy): Remove define. * sysdeps/x86_64/multiarch/stpcpy.c (_HAVE_STRING_ARCH_stpcpy): Likewise. * sysdeps/x86_64/multiarch/strcspn.c (_HAVE_STRING_ARCH_strcspn): Likewise. * sysdeps/x86_64/multiarch/strncat.c (_HAVE_STRING_ARCH_strncat): Likewise. * sysdeps/x86_64/multiarch/strncpy.c (_HAVE_STRING_ARCH_strncpy): Likewise. * sysdeps/x86_64/multiarch/strpbrk.c (_HAVE_STRING_ARCH_strpbrk): Likewise. * sysdeps/x86_64/multiarch/strspn.c (_HAVE_STRING_ARCH_strspn): Likewise.
2017-08-19Mark internal SSE2 functions with attribute_hidden [BZ #18822]H.J. Lu2-2/+2
Mark internal SSE2 functions with attribute_hidden to allow direct access within libc.so and libc.a without using GOT nor PLT. [BZ #18822] * sysdeps/x86_64/multiarch/strcspn-c.c (STRCSPN_SSE2): Add attribute_hidden. (__strspn_sse2): Likewise.
2017-08-04x86-64: Use IFUNC memcpy and mempcpy in libc.aH.J. Lu8-36/+22
Since apply_irel is called before memcpy and mempcpy are called, we can use IFUNC memcpy and mempcpy in libc.a. * sysdeps/x86_64/memmove.S (MEMCPY_SYMBOL): Don't check SHARED. (MEMPCPY_SYMBOL): Likewise. * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Test memcpy and mempcpy in libc.a. * sysdeps/x86_64/multiarch/memcpy-ssse3-back.S: Also include in libc.a. * sysdeps/x86_64/multiarch/memcpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/memmove-avx512-no-vzeroupper.S: Likewise. * sysdeps/x86_64/multiarch/memcpy.c: Also include in libc.a. (__hidden_ver1): Don't use in libc.a. * sysdeps/x86_64/multiarch/memmove-sse2-unaligned-erms.S (__mempcpy): Don't create a weak alias in libc.a. * sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S: Support libc.a. * sysdeps/x86_64/multiarch/mempcpy.c: Also include in libc.a. (__hidden_ver1): Don't use in libc.a.
2017-07-10x86-64: Test memmove_chk and memset_chk only in libc.so [BZ #21741]H.J. Lu1-0/+4
Since there are no multiarch versions of memmove_chk and memset_chk, test multiarch versions of memmove_chk and memset_chk only in libc.so. [BZ #21741] * sysdeps/x86_64/multiarch/ifunc-impl-list.c (__libc_ifunc_impl_list): Test memmove_chk and memset_chk only in libc.so.
2017-07-09x86-64: Update comments in IFUNC selectorsH.J. Lu16-21/+16
* sysdeps/x86_64/multiarch/memcmp.c: Update comments. * sysdeps/x86_64/multiarch/memmove.c: Likewise. * sysdeps/x86_64/multiarch/memrchr.c: Likewise. * sysdeps/x86_64/multiarch/memset.c: Likewise. * sysdeps/x86_64/multiarch/rawmemchr.c: Likewise. * sysdeps/x86_64/multiarch/strchrnul.c: Likewise. * sysdeps/x86_64/multiarch/strlen.c: Likewise. * sysdeps/x86_64/multiarch/strnlen.c: Likewise. * sysdeps/x86_64/multiarch/wcschr.c: Likewise. * sysdeps/x86_64/multiarch/wcscpy.c: Likewise. * sysdeps/x86_64/multiarch/wcslen.c: Likewise. * sysdeps/x86_64/multiarch/wcsnlen.c: Likewise. * sysdeps/x86_64/multiarch/wmemchr.c: Likewise. * sysdeps/x86_64/multiarch/wmemcmp.c: Likewise. * sysdeps/x86_64/multiarch/wmemset.c: Likewise. * sysdeps/x86_64/multiarch/wmemset_chk.c: Likewise.
2017-07-09x86-64: Update comments in ifunc-impl-list.cH.J. Lu1-16/+16
All x86-64 IFUNC selectors are written in C now. Update comments to reflect it. * sysdeps/x86_64/multiarch/ifunc-impl-list.c: Update comments.
2017-06-27x86-64: Optimize memcmp-avx2-movbe.S for short differenceH.J. Lu1-56/+62
Check the first 32 bytes before checking size when size >= 32 bytes to avoid unnecessary branch if the difference is in the first 32 bytes. Replace vpmovmskb/subl/jnz with vptest/jnc. On Haswell, the new version is as fast as the previous one. On Skylake, the new version is a little bit faster. * sysdeps/x86_64/multiarch/memcmp-avx2-movbe.S (MEMCMP): Check the first 32 bytes before checking size when size >= 32 bytes. Replace vpmovmskb/subl/jnz with vptest/jnc.
2017-06-23x86-64: Optimize L(between_2_3) in memcmp-avx2-movbe.SH.J. Lu1-4/+2
Turn movzbl -1(%rdi, %rdx), %edi movzbl -1(%rsi, %rdx), %esi orl %edi, %eax orl %esi, %ecx into movb -1(%rdi, %rdx), %al movb -1(%rsi, %rdx), %cl * sysdeps/x86_64/multiarch/memcmp-avx2-movbe.S (between_2_3): Replace movzbl and orl with movb.
2017-06-23x86-64: Fix comment typo in memcmp-avx2-movbe.SFlorian Weimer1-1/+1
2017-06-23x86-64: memcmp-avx2-movbe.S needs saturating subtraction [BZ #21662]Florian Weimer1-10/+10
This code: L(between_2_3): /* Load as big endian with overlapping loads and bswap to avoid branches. */ movzwl -2(%rdi, %rdx), %eax movzwl -2(%rsi, %rdx), %ecx shll $16, %eax shll $16, %ecx movzwl (%rdi), %edi movzwl (%rsi), %esi orl %edi, %eax orl %esi, %ecx bswap %eax bswap %ecx subl %ecx, %eax ret needs a saturating subtract because the full register is used. With this commit, only the lower 24 bits of the register are used, so a regular subtraction suffices. The test case change adds coverage for these kinds of bugs.
2017-06-21x86-64: Implement strcmp family IFUNC selectors in CH.J. Lu24-240/+605
Implement strcmp family IFUNC selectors in C. All internal calls within libc.so can use IFUNC on x86-64 since unlike x86, x86-64 supports PC-relative addressing to access the GOT entry so that it can call via PLT without using an extra register. For libc.a, we can't use IFUNC for functions which are called before IFUNC has been initialized. Use IFUNC internally reduces the icache footprint since libc.so and other codes in the process use the same implementations. This patch uses IFUNC for strcmp family functions within libc. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add strcmp-sse2, strcmp-sse4_2, strncmp-sse2, strncmp-sse4_2, strcasecmp_l-sse2, strcasecmp_l-sse4_2, strcasecmp_l-avx, strncase_l-sse2, strncase_l-sse4_2 and strncase_l-avx. * sysdeps/x86_64/multiarch/ifunc-strcasecmp.h: New file. * sysdeps/x86_64/multiarch/strcasecmp.c: Likewise. * sysdeps/x86_64/multiarch/strcasecmp_l-avx.S: Likewise. * sysdeps/x86_64/multiarch/strcasecmp_l-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strcasecmp_l-sse4_2.S: Likewise. * sysdeps/x86_64/multiarch/strcasecmp_l.c: Likewise. * sysdeps/x86_64/multiarch/strcmp-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strcmp-sse4_2.S: Likewise. * sysdeps/x86_64/multiarch/strcmp.c: Likewise. * sysdeps/x86_64/multiarch/strncase.c: Likewise. * sysdeps/x86_64/multiarch/strncase_l-avx.S : Likewise. * sysdeps/x86_64/multiarch/strncase_l-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strncase_l-sse4_2.S: Likewise. * sysdeps/x86_64/multiarch/strncase_l.c: Likewise. * sysdeps/x86_64/multiarch/strncmp-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strncmp-sse4_2.S: Likewise. * sysdeps/x86_64/multiarch/strncmp.c: Likewise. * sysdeps/x86_64/multiarch/strcasecmp_l.S: Removed. * sysdeps/x86_64/multiarch/strcmp.S: Likewise. * sysdeps/x86_64/multiarch/strncase_l.S: Likewise. * sysdeps/x86_64/multiarch/strncmp.S: Likewise. * sysdeps/x86_64/multiarch/strcmp-sse42.S: Include <sysdep.h>. (STRCMP_SSE42): New. Defined to __strcmp_sse42 if not defined. [USE_AS_STRCASECMP_L || USE_AS_STRNCASECMP_L]: Include "locale-defines.h". (UPDATE_STRNCMP_COUNTER): New. (SECTION): Likewise. (GLABEL): Likewise. (LABEL): Likewise. * sysdeps/x86_64/multiarch/strncmp-ssse3.S: Rewrite and enable for libc.a.
2017-06-20Fix fallout from bits/string.h removal.Zack Weinberg2-0/+4
Remove one more string inline that was defined directly in string.h; in the absence of the rest of the inlines, it broke the build. Like other ifunc shims for these functions, x86_64/multiarch/{mem,st}pcpy.c need to define __NO_STRING_INLINES and NO_MEMPCPY_STPCPY_REDIRECT. * string/string.h (__mempcpy_inline): Delete. * sysdeps/x86_64/multiarch/mempcpy.c * sysdeps/x86_64/multiarch/stpcpy.c: Define NO_MEMPCPY_STPCPY_REDIRECT and __NO_STRING_INLINES before including string.h.
2017-06-20Remove bits/string.h.Zack Weinberg1-6/+1
These machine-dependent inline string functions have never been on by default, and even if they were a good idea at the time they were introduced, they haven't really been touched in ten to fifteen years and probably aren't a good idea on current-gen processors. Current thinking is that this class of optimization is best left to the compiler. * bits/string.h, string/bits/string.h * sysdeps/aarch64/bits/string.h * sysdeps/m68k/m680x0/m68020/bits/string.h * sysdeps/s390/bits/string.h, sysdeps/sparc/bits/string.h * sysdeps/x86/bits/string.h: Delete file. * string/string.h: Don't include bits/string.h. * string/bits/string3.h: Rename to bits/string_fortified.h. No need to undef various symbols that the removed headers might have defined as macros. * string/Makefile (headers): Remove bits/string.h, change bits/string3.h to bits/string_fortified.h. * string/string-inlines.c: Update commentary. Remove definitions of various macros that nothing looks at anymore. Don't directly include bits/string.h. Set _STRING_INLINE_unaligned here, based on compiler-predefined macros. * string/strncat.c: If STRNCAT is not defined, or STRNCAT_PRIMARY _is_ defined, provide internal hidden alias __strncat. * include/string.h: Declare internal hidden alias __strncat. Only forward __stpcpy to __builtin_stpcpy if __NO_STRING_INLINES is not defined. * include/bits/string3.h: Rename to bits/string_fortified.h, update to match above. * sysdeps/i386/string-inlines.c: Define compat symbols for everything formerly defined by sysdeps/x86/bits/string.h. Make existing definitions into compat symbols as well. Remove some no-longer-necessary messing around with macros. * sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c * sysdeps/powerpc/powerpc64/multiarch/mempcpy.c * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c * sysdeps/s390/multiarch/mempcpy.c No need to define _HAVE_STRING_ARCH_mempcpy. Do define __NO_STRING_INLINES and NO_MEMPCPY_STPCPY_REDIRECT. * sysdeps/i386/i686/multiarch/strncat-c.c * sysdeps/s390/multiarch/strncat-c.c * sysdeps/x86_64/multiarch/strncat-c.c Define STRNCAT_PRIMARY. Don't change definition of libc_hidden_def.
2017-06-19Fix typo when undefining weak_aliasSiddhesh Poyarekar1-1/+1
The macro directive #undef was miswritten as #undefine. * sysdeps/x86_64/multiarch/rawmemchr-sse2.S: Fix typo.
2017-06-15x86-64: Implement strcspn/strpbrk/strspn IFUNC selectors in CH.J. Lu11-111/+211
Implement strcspn/strpbrk/strspn IFUNC selectors in C All internal calls within libc.so can use IFUNC on x86-64 since unlike x86, x86-64 supports PC-relative addressing to access the GOT entry so that it can call via PLT without using an extra register. For libc.a, we can't use IFUNC for functions which are called before IFUNC has been initialized. Use IFUNC internally reduces the icache footprint since libc.so and other codes in the process use the same implementations. This patch uses IFUNC for strcspn/strpbrk/strspn functions within libc. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add strcspn-sse2, strpbrk-sse2 and strspn-sse2. * sysdeps/x86_64/strcspn.S (STRPBRK_P): Removed. Check USE_AS_STRPBRK instead of STRPBRK_P. * sysdeps/x86_64/strpbrk.S (USE_AS_STRPBRK): New. * sysdeps/x86_64/multiarch/ifunc-sse4_2.h: New file. * sysdeps/x86_64/multiarch/strcspn-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strcspn.c: Likewise. * sysdeps/x86_64/multiarch/strpbrk-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strpbrk.c: Likewise. * sysdeps/x86_64/multiarch/strspn-sse2.S: Likewise. * sysdeps/x86_64/multiarch/strspn.c: Likewise. * sysdeps/x86_64/multiarch/strcspn.S: Removed. * sysdeps/x86_64/multiarch/strpbrk.S: Likewise. * sysdeps/x86_64/multiarch/strspn.S: Likewise. * sysdeps/x86_64/multiarch/strpbrk-c.c: Remove "#ifdef SHARED" and "#endif".
2017-06-15x86-64: Implement wcscpy IFUNC selector in CH.J. Lu1-17/+21
* sysdeps/x86_64/multiarch/wcscpy.S: Removed. * sysdeps/x86_64/multiarch/wcscpy.c: New file.
2017-06-15x86-64: Implement strcat family IFUNC selectors in CH.J. Lu6-90/+95
Implement strcat family IFUNC selectors in C. All internal calls within libc.so can use IFUNC on x86-64 since unlike x86, x86-64 supports PC-relative addressing to access the GOT entry so that it can call via PLT without using an extra register. For libc.a, we can't use IFUNC for functions which are called before IFUNC has been initialized. Use IFUNC internally reduces the icache footprint since libc.so and other codes in the process use the same implementations. This patch uses IFUNC for strcat family functions within libc. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add strcat-sse2. * sysdeps/x86_64/multiarch/strcat-sse2.S: New file. * sysdeps/x86_64/multiarch/strcat.c: Likewise. * sysdeps/x86_64/multiarch/strncat.c: Likewise. * sysdeps/x86_64/multiarch/strcat.S: Removed. * sysdeps/x86_64/multiarch/strncat.S: Likewise.
2017-06-15x86-64: Implement memcmp family IFUNC selectors in CH.J. Lu7-113/+126
Implement memcmp family IFUNC selectors in C. All internal calls within libc.so can use IFUNC on x86-64 since unlike x86, x86-64 supports PC-relative addressing to access the GOT entry so that it can call via PLT without using an extra register. For libc.a, we can't use IFUNC for functions which are called before IFUNC has been initialized. Use IFUNC internally reduces the icache footprint since libc.so and other codes in the process use the same implementations. This patch uses IFUNC for memcmp family functions within libc. * sysdeps/x86_64/multiarch/Makefile (sysdep_routines): Add memcmp-sse2. * sysdeps/x86_64/multiarch/ifunc-memcmp.h: New file. * sysdeps/x86_64/multiarch/memcmp-sse2.S: Likewise. * sysdeps/x86_64/multiarch/memcmp.c: Likewise. * sysdeps/x86_64/multiarch/wmemcmp.c: Likewise. * sysdeps/x86_64/multiarch/memcmp.S: Removed. * sysdeps/x86_64/multiarch/wmemcmp.S: Likewise.
generated by cgit v1.1 at 2024-07-11 19:13:44 +0000