| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As discussed at the patch review meeting
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Reviewed-by: Simon Chopin <simon.chopin@canonical.com>
|
|
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the logp1 functions (aliases for log1p functions - the
name is intended to be more consistent with the new log2p1 and
log10p1, where clearly it would have been very confusing to name those
functions log21p and log101p). As aliases rather than new functions,
the content of this patch is somewhat different from those actually
adding new functions.
Tests are shared with log1p, so this patch *does* mechanically update
all affected libm-test-ulps files to expect the same errors for both
functions.
The vector versions of log1p on aarch64 and x86_64 are *not* updated
to have logp1 aliases (and thus there are no corresponding header,
tests, abilist or ulps changes for vector functions either). It would
be reasonable for such vector aliases and corresponding changes to
other files to be made separately. For now, the log1p tests instead
avoid testing logp1 in the vector case (a Makefile change is needed to
avoid problems with grep, used in generating the .c files for vector
function tests, matching more than one ALL_RM_TEST line in a file
testing multiple functions with the same inputs, when it assumes that
the .inc file only has a single such line).
Tested for x86_64 and x86, and with build-many-glibcs.py.
|
|
Needed due to:
"Implement C23 log2p1"
commit ID 79c52daf4740b00bef43e4f5a4281b3480459b38
|
|
Instead of tying based on the linker name and version, check for the
required support:
* whether it does not generate dynamic TLS relocations in PIE
(binutils PR ld/22263);
* if it accepts --no-dynamic-linker (by using -static-pie);
* and if it adds a DT_JMPREL pointing to .rela.iplt with static pie.
The patch also trims the comments, for binutils one of the tests should
already cover it. The kernel ones are not clear which version should
have the backport, nor it is something that glibc can do much about
it. Finally, the glibc is somewhat confusing, since it refers
to commits not related to s390x.
Checked with a build for s390x-linux-gnu.
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
|
|
It allows to remove a lot of arch-specific implementations.
Checked on x86_64, aarch64, powerpc64.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
WG14 decided to use the name C23 as the informal name of the next
revision of the C standard (notwithstanding the publication date in
2024). Update references to C2X in glibc to use the C23 name.
This is intended to update everything *except* where it involves
renaming files (the changes involving renaming tests are intended to
be done separately). In the case of the _ISOC2X_SOURCE feature test
macro - the only user-visible interface involved - support for that
macro is kept for backwards compatibility, while adding
_ISOC23_SOURCE.
Tested for x86_64.
|
|
Starting with commits
- 7ea510127e2067efa07865158ac92c330c379950
string: Add libc_hidden_proto for strchrnul
- 22999b2f0fb62eed1af4095d062bd1272d6afeb1
string: Add libc_hidden_proto for memrchr
building glibc on s390x with --disable-multi-arch fails if only
the C-variant of strchrnul / memrchr is used. This is the case
if gcc uses -march < z13.
The build fails with:
../sysdeps/s390/strchrnul-c.c:28:49: error: ‘__strchrnul_c’ undeclared here (not in a function); did you mean ‘__strchrnul’?
28 | __hidden_ver1 (__strchrnul_c, __GI___strchrnul, __strchrnul_c);
With --disable-multi-arch, __strchrnul_c is not available as string/strchrnul.c
is just included without defining STRCHRNUL and thus we also don't have to create
the internal hidden symbol.
Tested-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
|
|
The tunable parsing duplicates the tunable environment variable so it
null-terminates each one since it simplifies the later parsing. It has
the drawback of adding another point of failure (__minimal_malloc
failing), and the memory copy requires tuning the compiler to avoid mem
operations calls.
The parsing now tracks the tunable start and its size. The
dl-tunable-parse.h adds helper functions to help parsing, like a strcmp
that also checks for size and an iterator for suboptions that are
comma-separated (used on hwcap parsing by x86, powerpc, and s390x).
Since the environment variable is allocated on the stack by the kernel,
it is safe to keep the references to the suboptions for later parsing
of string tunables (as done by set_hwcaps by multiple architectures).
Checked on x86_64-linux-gnu, powerpc64le-linux-gnu, and
aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The linker just concatenates the .init and .fini sections which
results in the complete _init and _fini functions. If needed the
linker adds padding bytes due to an alignment. GNU ld is adding
NOPs, which is fine. But e.g. mold is adding traps which results
in broken _init and _fini functions.
Thus this patch removes the alignment in .init and .fini sections
in crtn.S files.
We keep the 4 byte function alignment in crti.S files. As the
assembler now also outputs the start of _init and _fini functions
as multiples of 4 byte, it perhaps has to fill it. Although GNU as
is using NOPs here, to be sure, we just keep the alignment with
0x07 (=NOPs) at the end of crti.S.
In order to avoid an obvious NOP slide in _fini, this patch also
uses an lg instead of lgr instruction. Then the emitted instructions
needs a multiple of 4 bytes.
|
|
The _dl_non_dynamic_init does not parse LD_PROFILE, which does not
enable profile for dlopen objects. Since dlopen is deprecated for
static objects, it is better to remove the support.
It also allows to trim down libc.a of profile support.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
Using the memcmp symbol directly allows the compile to inline the
memcmp calls (especially because _dl_tunable_set_hwcaps uses constants
values), generating better code.
Checked with tst-tunables on s390x-linux-gnu (qemu system).
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
If feenableexcept or fedisableexcept gets excepts=FE_INVALID=0x80
as input, we have a signed left shift: 0x80 << 24 which is not
representable as int and thus is undefined behaviour according to
C standard.
This patch casts excepts as unsigned int before shifting, which is
defined.
For me, the observed undefined behaviour is that the shift is done
with "unsigned"-instructions, which is exactly what we want.
Furthermore, I don't get any exception-flags.
After the fix, the code is using the same instruction sequence as
before.
|
|
The static PIE configure check uses link tests. When bootstrapping
a cross-toolchain, the link tests fail due to missing crt-files /
libc.so. As we explicitely want to test an issue in binutils (ld),
we now also explicitely check for known linker versions.
See also commit 368b7c614b102122b86af3953daea2b30230d0a8
S390: Use compile-only instead of also link-tests in configure.
|
|
Bump autoconf requirement to 2.71 to allow regenerating configure on
more recent distributions. autoconf 2.71 has been in Fedora since F36
and is the current version in Debian stable (bookworm). It appears to
be current in Gentoo as well.
All sysdeps configure and preconfigure scripts have also been
regenerated; all changes are trivial transformations that do not affect
functionality.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Depending on build configuration, the [routine]-c.c files may be chosen
to provide fortified routines implementation. While [routines].c
implementation were automatically excluded, the [routines]-c.c ones were
not. This patch fixes that by adding these file to the list to be
filtered.
|
|
|
|
Some of the s390-specific configure checks are using compile and
link configure tests. Now use only compile tests as the link
tests fails when e.g. bootstrapping a cross-toolchain due to
missing crt-files/libc.so. This is achieved by using
AC_COMPILE_IFELSE in configure.ac file.
This is observable e.g. when using buildroot which builds glibc
only once or the build-many-glibcs.py script. Note that the latter
one is building glibc twice in the compilers-step (configure-checks
fails) and in the glibcs-step (configure-checks succeed).
Note, that the s390 specific configure tests for static PIE have to
link an executable to test binutils support. Thus we can't fix
those tests.
|
|
And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The _FPU_SETCW and _FPU_GETCW macros are defined with inline assemblies.
They use the sfpc and efpc instructions, respectively. But both contain
a spurious second operand that leads to a compile error with Clang.
Removing this operand works both with gcc/gas (since binutils 2.18) as
well as with clang/llvm.
|
|
Needed due to recent commits:
- "added pair of inputs for hypotf in binary32"
commit ID cf7ffdd8a5f6da55397e10b3860062944312824c
- "update auto-libm-test-out-hypot"
commit ID 3efbf11fdf15ed991d2c41743921c524a867e145
|
|
It fixes the build after 7ea510127e2067e and 22999b2f0fb62.
Checked with build for s390x-linux-gnu with -march=z13.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
|
|
Now that _STRING_ARCH_unaligned is not used anymore.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
|
|
And use a packed structure instead. The compiler generates optimized
unaligned code if the architecture supports it.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
|
|
Builds for s390 recently started failing with:
../sysdeps/s390/multiarch/ifunc-impl-list.c: In function '__libc_ifunc_impl_list':
../sysdeps/s390/multiarch/ifunc-impl-list.c:83:21: error: unused variable 'dl_hwcap' [-Werror=unused-variable]
83 | unsigned long int dl_hwcap = features->hwcap;
| ^~~~~~~~
https://sourceware.org/pipermail/libc-testresults/2023q1/010855.html
Add __attribute__ ((unused)) as already done for another variable
there.
Tested with build-many-glibcs.py (compilers and glibcs) for
s390x-linux-gnu and s390-linux-gnu.
Note: s390x-linux-gnu-O3 started failing with a different error
earlier; that problem may still need to be fixed after this fix is in.
https://sourceware.org/pipermail/libc-testresults/2023q1/010829.html
|
|
Although static linker can optimize it to local call, it follows the
internal scheme to provide hidden proto and definitions.
Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
|
|
Although static linker can optimize it to local call, it follows the
internal scheme to provide hidden proto and definitions.
Reviewed-by: Carlos Eduardo Seo <carlos.seo@linaro.org>
|
|
This patch enables the option to influence hwcaps and stfle bits used
by the s390 specific ifunc-resolvers. The currently x86-specific
tunable glibc.cpu.hwcaps is also used on s390x to achieve the task. In
addition the user can also set a CPU arch-level like z13 instead of
single HWCAP and STFLE features.
Note that the tunable only handles the features which are really used
in the IFUNC-resolvers. All others are ignored as the values are only
used inside glibc. Thus we can influence:
- HWCAP_S390_VXRS (z13)
- HWCAP_S390_VXRS_EXT (z14)
- HWCAP_S390_VXRS_EXT2 (z15)
- STFLE_MIE3 (z15)
The influenced hwcap/stfle-bits are stored in the s390-specific
cpu_features struct which also contains reserved fields for future
usage.
The ifunc-resolvers and users of stfle bits are adjusted to use the
information from cpu_features struct.
On 31bit, the ELF_MACHINE_IRELATIVE macro is now also defined.
Otherwise the new ifunc-resolvers segfaults as they depend on
the not yet processed_rtld_global_ro@GLIBC_PRIVATE relocation.
|
|
It also cleanups the multiple inclusion by leaving the ifunc
implementation to undef the weak_alias and libc_hidden_def.
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
|
|
New algorithm now calls strchrnul.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
and powerpc64-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
|
|
New algorithm read the first aligned address and mask off the unwanted
bytes (this strategy is similar to arch-specific implementations used
on powerpc, sparc, and sh).
The loop now read word-aligned address and check using the has_zero_eq
function.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64-linux-gnu,
and powerpc-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
|
|
New algorithm read the first aligned address and mask off the
unwanted bytes (this strategy is similar to arch-specific
implementations used on powerpc, sparc, and sh).
The loop now read word-aligned address and check using the has_zero
macro.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc-linux-gnu,
and powercp64-linux-gnu by removing the arch-specific assembly
implementation and disabling multi-arch (it covers both LE and BE
for 64 and 32 bits).
Co-authored-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
|
|
|
|
This makes it more likely that the compiler can compute the strlen
argument in _startup_fatal at compile time, which is required to
avoid a dependency on strlen this early during process startup.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
|
In the future, this will result in a compilation failure if the
macros are unexpectedly undefined (due to header inclusion ordering
or header inclusion missing altogether).
Assembler sources are more difficult to convert. In many cases,
they are hand-optimized for the mangling and no-mangling variants,
which is why they are not converted.
sysdeps/s390/s390-32/__longjmp.c and sysdeps/s390/s390-64/__longjmp.c
are special: These are C sources, but most of the implementation is
in assembler, so the PTR_DEMANGLE macro has to be undefined in some
cases, to match the assembler style.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This allows us to define a generic no-op version of PTR_MANGLE and
PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE
unconditionally in C sources, avoiding an unintended loss of hardening
due to missing include files or unlucky header inclusion ordering.
In i386 and x86_64, we can avoid a <tls.h> dependency in the C
code by using the computed constant from <tcb-offsets.h>. <sysdep.h>
no longer includes these definitions, so there is no cyclic dependency
anymore when computing the <tcb-offsets.h> constants.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Besides the option being gcc specific, this approach is still fragile
and not future proof since we do not know if this will be the only
optimization option gcc will add that transforms loops to memset
(or any libcall).
This patch adds a new header, dl-symbol-redir-ifunc.h, that can b
used to redirect the compiler generated libcalls to port the generic
memset implementation if required.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Removal of legacy hwcaps support from the dynamic loader left
no users of _dl_string_hwcap.
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Rename atomic_exchange_rel/acq to use atomic_exchange_release/acquire
since these map to the standard C11 atomic builtins.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Changes to these arrays are often backported to stable releases,
but additions to these arrays shift the offsets of the following
_rltd_global_ro members, thus breaking the GLIBC_PRIVATE ABI.
Obviously, this change is itself an internal ABI break, but at least
it will avoid further ABI breaks going forward.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
If the architecture level set is high enough, no IFUNCs are used at
all and the variable i would be unused. Then the build fails with:
../sysdeps/s390/multiarch/ifunc-impl-list.c: In function ‘__libc_ifunc_impl_list’:
../sysdeps/s390/multiarch/ifunc-impl-list.c:76:10: error: unused variable ‘i’ [-Werror=unused-variable]
76 | size_t i = max;
| ^
cc1: all warnings being treated as errors
|
|
Rather than buffering 16 MiB of entropy in userspace (by way of
chacha20), simply call getrandom() every time.
This approach is doubtlessly slower, for now, but trying to prematurely
optimize arc4random appears to be leading toward all sorts of nasty
properties and gotchas. Instead, this patch takes a much more
conservative approach. The interface is added as a basic loop wrapper
around getrandom(), and then later, the kernel and libc together can
work together on optimizing that.
This prevents numerous issues in which userspace is unaware of when it
really must throw away its buffer, since we avoid buffering all
together. Future improvements may include userspace learning more from
the kernel about when to do that, which might make these sorts of
chacha20-based optimizations more possible. The current heuristic of 16
MiB is meaningless garbage that doesn't correspond to anything the
kernel might know about. So for now, let's just do something
conservative that we know is correct and won't lead to cryptographic
issues for users of this function.
This patch might be considered along the lines of, "optimization is the
root of all evil," in that the much more complex implementation it
replaces moves too fast without considering security implications,
whereas the incremental approach done here is a much safer way of going
about things. Once this lands, we can take our time in optimizing this
properly using new interplay between the kernel and userspace.
getrandom(0) is used, since that's the one that ensures the bytes
returned are cryptographically secure. But on systems without it, we
fallback to using /dev/urandom. This is unfortunate because it means
opening a file descriptor, but there's not much of a choice. Secondly,
as part of the fallback, in order to get more or less the same
properties of getrandom(0), we poll on /dev/random, and if the poll
succeeds at least once, then we assume the RNG is initialized. This is a
rough approximation, as the ancient "non-blocking pool" initialized
after the "blocking pool", not before, and it may not port back to all
ancient kernels, though it does to all kernels supported by glibc
(≥3.2), so generally it's the best approximation we can do.
The motivation for including arc4random, in the first place, is to have
source-level compatibility with existing code. That means this patch
doesn't attempt to litigate the interface itself. It does, however,
choose a conservative approach for implementing it.
Cc: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: Paul Eggert <eggert@cs.ucla.edu>
Cc: Mark Harris <mark.hsj@gmail.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
It adds vectorized ChaCha20 implementation based on libgcrypt
cipher/chacha20-s390x.S. The final state register clearing is
omitted.
On a z15 it shows the following improvements (using formatted
bench-arc4random data):
GENERIC MB/s
-----------------------------------------------
arc4random [single-thread] 198.92
arc4random_buf(16) [single-thread] 244.49
arc4random_buf(32) [single-thread] 282.73
arc4random_buf(48) [single-thread] 286.64
arc4random_buf(64) [single-thread] 320.06
arc4random_buf(80) [single-thread] 297.43
arc4random_buf(96) [single-thread] 310.96
arc4random_buf(112) [single-thread] 308.10
arc4random_buf(128) [single-thread] 309.90
-----------------------------------------------
VX. MB/s
-----------------------------------------------
arc4random [single-thread] 430.26
arc4random_buf(16) [single-thread] 735.14
arc4random_buf(32) [single-thread] 1029.99
arc4random_buf(48) [single-thread] 1206.76
arc4random_buf(64) [single-thread] 1311.92
arc4random_buf(80) [single-thread] 1378.74
arc4random_buf(96) [single-thread] 1445.06
arc4random_buf(112) [single-thread] 1484.32
arc4random_buf(128) [single-thread] 1517.30
-----------------------------------------------
Checked on s390x-linux-gnu.
|
|
Let's use LC_ALL=C as we do elsewhere for consistency.
Tested on s390x-ibm-linux-gnu.
See: 72bd208846535725ea28b8173e79ef60e57a968c
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
|
|
We already check for it in root configure.ac with AC_CHECK_TOOL. Let's
use the result.
Tested on s390x-ibm-linux-gnu.
Signed-off-by: Sam James <sam@gentoo.org>
Reviewed-by: Stefan Liebler <stli@linux.ibm.com>
|
|
Add a proper bounds check to __libc_ifunc_impl_list. This makes MAX_IFUNC
redundant and fixes several targets that will write outside the array.
To avoid unnecessary large diffs, pass the maximum in the argument 'i' to
IFUNC_IMPL_ADD - 'max' can be used in new ifunc definitions and existing
ones can be updated if desired.
Passes buildmanyglibc.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Since ad43cac44a the generic code already shuffles the argv/envp/auxv
on the stack to remove the ld.so own arguments and thus _dl_skip_args
is always 0. So there is no need to adjust the argc or argv.
Checked on s390x-linux-gnu and s390-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
This commit enables static PIE on 64bit. On 31bit, static PIE is
not supported.
A new configure check in sysdeps/s390/s390-64/configure.ac also performs
a minimal test for requirements in ld:
Ensure you also have those patches for:
- binutils (ld)
- "[PR ld/22263] s390: Avoid dynamic TLS relocs in PIE"
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=26b1426577b5dcb32d149c64cca3e603b81948a9
(Tested by configure check above)
Otherwise there will be a R_390_TLS_TPOFF relocation, which fails to
be processed in _dl_relocate_static_pie() as static TLS map is not setup.
- "s390: Add DT_JMPREL pointing to .rela.[i]plt with static-pie"
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d942d8db12adf4c9e5c7d9ed6496a779ece7149e
(We can't test it in configure as we are not able to link a static PIE
executable if the system glibc lacks static PIE support)
Otherwise there won't be DT_JMPREL, DT_PLTRELA, DT_PLTRELASZ entries
and the IFUNC symbols are not processed, which leads to crashes.
- kernel (the mentioned links to the commits belong to 5.19 merge window):
- "s390/mmap: increase stack/mmap gap to 128MB"
https://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git/commit/?h=features&id=f2f47d0ef72c30622e62471903ea19446ea79ee2
- "s390/vdso: move vdso mapping to its own function"
https://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git/commit/?h=features&id=57761da4dc5cd60bed2c81ba0edb7495c3c740b8
- "s390/vdso: map vdso above stack"
https://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git/commit/?h=features&id=9e37a2e8546f9e48ea76c839116fa5174d14e033
- "s390/vdso: add vdso randomization"
https://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git/commit/?h=features&id=41cd81abafdc4e58a93fcb677712a76885e3ca25
(We can't test the kernel of the target system)
Otherwise if /proc/sys/kernel/randomize_va_space is turned off (0),
static PIE executables like ldconfig will crash. While startup sbrk is
used to enlarge the HEAP. Unfortunately the underlying brk syscall fails
as there is not enough space after the HEAP. Then the address of the TLS
image is invalid and the following memcpy in __libc_setup_tls() leads
to a segfault.
If /proc/sys/kernel/randomize_va_space is activated (default: 2), there
is enough space after HEAP.
- glibc
- "Linux: Define MMAP_CALL_INTERNAL"
https://sourceware.org/git/?p=glibc.git;a=commit;h=c1b68685d438373efe64e5f076f4215723004dfb
- "i386: Remove OPTIMIZE_FOR_GCC_5 from Linux libc-do-syscall.S"
https://sourceware.org/git/?p=glibc.git;a=commit;h=6e5c7a1e262961adb52443ab91bd2c9b72316402
- "i386: Honor I386_USE_SYSENTER for 6-argument Linux system calls"
https://sourceware.org/git/?p=glibc.git;a=commit;h=60f0f2130d30cfd008ca39743027f1e200592dff
- "ia64: Always define IA64_USE_NEW_STUB as a flag macro"
https://sourceware.org/git/?p=glibc.git;a=commit;h=18bd9c3d3b1b6a9182698c85354578d1d58e9d64
- "Linux: Implement a useful version of _startup_fatal"
https://sourceware.org/git/?p=glibc.git;a=commit;h=a2a6bce7d7e52c1c34369a7da62c501cc350bc31
- "Linux: Introduce __brk_call for invoking the brk system call"
https://sourceware.org/git/?p=glibc.git;a=commit;h=b57ab258c1140bc45464b4b9908713e3e0ee35aa
- "csu: Implement and use _dl_early_allocate during static startup"
https://sourceware.org/git/?p=glibc.git;a=commit;h=f787e138aa0bf677bf74fa2a08595c446292f3d7
The mentioned patch series by Florian Weimer avoids the mentioned failing
sbrk syscall by falling back to mmap.
This commit also adjusts startup code in start.S to be ready for static PIE.
We have to add a wrapper function for main as we are not allowed to use
GOT relocations before __libc_start_main is called.
(Compare also to:
- commit 14d886edbd3d80b771e1c42fbd9217f9074de9c6
"aarch64: fix start code for static pie"
- commit 3d1d79283e6de4f7c434cb67fb53a4fd28359669
"aarch64: fix static pie enabled libc when main is in a shared library"
)
|
|
_dl_skip_args is always 0, so the target specific code that modifies
argv after relro protection is applied is no longer used.
After the patch relro protection is applied to _dl_argv consistently
on all targets.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
PI_STATIC_AND_HIDDEN indicates whether accesses to internal linkage
variables and hidden visibility variables in a shared object (ld.so)
need dynamic relocations (usually R_*_RELATIVE). PI (position
independent) in the macro name is a misnomer: a code sequence using GOT
is typically position-independent as well, but using dynamic relocations
does not meet the requirement.
Not defining PI_STATIC_AND_HIDDEN is legacy and we expect that all new
ports will define PI_STATIC_AND_HIDDEN. Current ports defining
PI_STATIC_AND_HIDDEN are more than the opposite. Change the configure
default.
No functional change.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
