| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There's a small chance that a fresh checkout will result in some of
the test-specific container files will have the same timestamp and
size, which breaks the rsync logic in test-container, resulting in
tests running with the wrong support files.
This patch changes the rsync logic to always copy the test-specific
files, which normally would always be copied anyway. The rsync logic
for the testroot itself is unchanged.
|
|
For configurations with cross-compiling equal to 'maybe' or 'no',
ldconfig will not run and thus the ld.so.cache will not be created
on the container testroot.pristine.
This lead to failures on both tst-glibc-hwcaps-prepend-cache and
tst-ldconfig-ld_so_conf-update on environments where the same
compiler can be used to build different ABIs (powerpc and x86 for
instance).
This patch addas a new test-container hook, ldconfig.run, that
triggers a ldconfig execution prior the test execution.
Checked on x86_64-linux-gnu and i686-linux-gnu.
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
|
|
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
In test-conainer we should set errno to 0 before calling strtol,
and check after with TEST_COMPARE.
In tst-support_capture_subprocess we should set errno to 0 before
checking it after the call to strtol.
Tested on x86_64.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Expand the support infrastructure:
- Create $(complocaledir) in the testroot.pristine to support localedef.
- Add the variable $complocaledir to script support.
- Add the script command 'mkdirp'.
All localedef tests which run with default paths need to have the
$(complocaledir) created in testroot.pristine. The localedef binary
will not by itself create the default path, but it will write into
the path. By adding this we can simplify the localedef tests.
The variable $complocaledir is the value of the configured
$(complocaledir) which is the location of the compiled locales that
will be searched by the runtime by default.
The command mkdirp will be available in script setup and will
be equivalent to running `mkdir -p`.
The variable and command can be used to write more complex tests.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
I'm debugging a situation where lots of tests using test-container fail
and it's possible knowing errno would help understand why.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
exec <path_to_test_binary> [optional_argv_0]
copies test binary to specified location and runs it from
there. If the second argument is provided, that will
be used for argv[0]
cwd <directory>
attempts to chdir(directory) before running test
Note: "cwd" not "cd" as it takes effect just before the
test binary runs, not when it's encountered in the script,
so it can't be used as a path shortcut like "cd" would imply.
cleanup: use xstrdup() instead of strdup()
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
If WAIT_FOR_DEBUGGER is set to a non-zero value in the environment,
any test that runs will print some useful gdb information and wait
for gdb to attach to it and clear the "wait_for_debugger" variable.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
One of the implicit-fallthrough warnings from compiling glibc with
-Wextra appears to indicate an actual bug: the test-container code
could fall through inappropriately if execlp returns (which only
occurs on error). This patch adds appropriate error handling in this
case to avoid that fall-through.
Tested for x86_64.
* support/test-container.c (recursive_remove): Use FAIL_EXIT1 if
execlp returns.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
During postclean.req testing it was found that the fork in the
parent process (after the unshare syscall) would fail with ENOMEM
(see recursive_remove() in test-container.c). While failing with
ENOMEM is certainly unexpected, it is simply easier to refactor
the design and have the parent remain outside of the namespace.
This change moves the postclean.req processing to a distinct
process (the parent) that then forks the test process (which will
have to fork once more to complete uid/gid transitions). When the
test process exists the cleanup process will ensure all files are
deleted when a post clean is requested.
Signed-off-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
[BZ #23948]
* support/test-container.c: Move postclean step to before we
change namespaces.
|
|
* support/test-container.c (check_for_unshare_hints): New.
(main): Call it if unshare fails. Add support for "su" scriptlet
command.
|
|
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
The test-container.c file assumes that ld.so is always named
something like /elf/ld-linux-*.
But e.g. on s390x it is named ld64.so.1 or ld.so.1 on s390.
There are other architectures like power or mips with similar names.
This patch introduces the new global variable support_objdir_elf_ldso
which contains the absolute path to the runtime linker used by the
testsuite, e.g. OBJDIR_PATH/elf/ld-linux-x86-64.so.2.
The check in test-container.c is now comparing against this path.
Without this patch, test-container.c is searching invalid files / directories
and fails to find glibc/nss/tst-nss-test3.root/tst-nss-test3.script.
Then the test tst-nss-test3 fails!
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
* support/support.h (support_objdir_elf_ldso): New variable.
* support/support_paths.c (support_objdir_elf_ldso): Likewise.
* support/Makefile (CFLAGS-support_paths.c): Add definition
for OBJDIR_ELF_LDSO_PATH.
* support/test-container.c (main): Search for the ld.so
which is also used by the testsuite.
|
|
copy_file_range can't be used to copy a file from glibc source directory
to glibc build directory since they may be on different filesystems.
This patch adds xcopy_file_range for cross-device copy.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
[BZ #23597]
* support/Makefile (libsupport-routines): Add
support_copy_file_range and xcopy_file_range.
* support/support.h: Include <sys/types.h>.
(support_copy_file_range): New prototype.
* support/support_copy_file_range.c: New file. Copied and
modified from io/copy_file_range-compat.c.
* support/test-container.c (copy_one_file): Call xcopy_file_rang
instead of copy_file_range.
* support/xcopy_file_range.c: New file.
* support/xunistd.h (xcopy_file_range): New prototype.
|
|
For example, the security policy on the Fedora build daemons results in
this EPERM error.
|
|
* Makefile (testroot.pristine): New rules to initialize the
test-in-container "testroot".
* Makerules (all-testsuite): Add tests-container.
* Rules (tests-expected): Add tests-container.
(binaries-all-tests): Likewise.
(tests-container): New, run these tests in the testroot container.
* support/Makefile (others): Add *-container, support_paths.c,
xmkdirp, and links-dso-program.
* support/links-dso-program-c.c: New.
* support/links-dso-program.cc: New.
* support/test-container.c: New.
* support/shell-container.c: New.
* support/echo-container.c: New.
* support/true-container.c: New.
* support/xmkdirp.c: New.
* support/xsymlink.c: New.
* support/support_paths.c: New.
* support/support.h: Add support paths prototypes.
* support/xunistd.h: Add xmkdirp () and xsymlink ().
* nss/tst-nss-test3.c: Convert to test-in-container.
* nss/tst-nss-test3.root/: New.
|
