| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The majority of grp routines are entry points for nss functionality.
This commit removes the 'grp' subdirectory and moves all nss-relevant
functionality and all tests to 'nss', and the 'setgroups' stub into
'posix' (alongside the 'getgroups' stub). References to grp/ are
accordingly changed. In addition, compat-initgroups.c, a fallback
implementation of initgroups is renamed to initgroups-fallback.c so that
the build system does not confuse it for nss_compat/compat-initgroups.c.
Build time improves very slightly; e.g. down from an average of 45.5s to
44.5s on an 8-thread mobile x86_64 CPU.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Previously, if an entry was marked unusable for any reason, but had
not timed out yet, the assert would trigger.
One way to get into such state is if a data change is detected during
re-validation of an entry. This causes the entry to be marked as not
usable. If exits nscd soon after that, then the clock jumps
backwards, and nscd restarted, the cache re-validation run after
startup triggers the removed assert.
The change is more complicated than just the removal of the assert
because entries marked as not usable should be garbage-collected in
the second pass. To make this happen, it is necessary to update some
book-keeping data.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
The nscd daemon caches hosts data from NSS modules verbatim, without
filtering protocol families or sorting them (otherwise separate caches
would be needed for certain ai_flags combinations). The cache
implementation is complete separate from the getaddrinfo code. This
means that rebuilding getaddrinfo is not needed. The only function
actually used is __bump_nl_timestamp from check_pf.c, and this change
moves it into nscd/connections.c.
Tested on x86_64-linux-gnu with -fexceptions, built with
build-many-glibcs.py. I also backported this patch into a distribution
that still supports nscd and verified manually that caching still works.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
This was added in 233399bce2e79e5af3b344782e9943d5f1a9cdcb just for warn_if_unused
warnings rather than anything substantial.
Now that we have a proper configure argument for F_S (--enable-fortify-source),
just drop this entirely, to avoid conflicting with e.g. detected --enable-fortify-source
finding F_S=3, then nscd's Makefile setting F_S=2, resulting in a build-failure
because of the redefinition.
Signed-off-by: Sam James <sam@gentoo.org>
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Reviewed-by: Andreas K. Hüttel <dilfridge@gentoo.org>
|
|
The errno variable is potentially clobbered by the preceding
send call. It is not related to the to-be-cached information.
The parallel code in hstcache.c and servicescache.c already uses
errval.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
|
|
They are both used by __libc_freeres to free all library malloc
allocated resources to help tooling like mtrace or valgrind with
memory leak tracking.
The current scheme uses assembly markers and linker script entries
to consolidate the free routine function pointers in the RELRO segment
and to be freed buffers in BSS.
This patch changes it to use specific free functions for
libc_freeres_ptrs buffers and call the function pointer array directly
with call_function_static_weak.
It allows the removal of both the internal macros and the linker
script sections.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Signed-off-by: Qihao Chencao <twose@qq.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
It only adds a small overhead for unaligned inputs (which should not
be common) and unify the code.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
|
|
Almost all uses of rawmemchr find the end of a string. Since most targets use
a generic implementation, replacing it with strchr is better since that is
optimized by compilers into strlen (s) + s. Also fix the generic rawmemchr
implementation to use a cast to unsigned char in the if statement.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
I've updated copyright dates in glibc for 2023. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files.
|
|
|
|
Although the nscd module is built with 64 bit time_t, the routines
linked direct to libc.so need to use the internal symbols.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
When a request needs to be resent (e.g. due to insufficient buffer
space), the references to subsequent tuples in the local variable are
stale and should not be used. This used to work by accident before, but
since 1d495912a it no longer does. Instead of trying to reset it, just
let gethostbyname4_r write into TUMPBUF6 for us, thus maintaining a
consistent state at all times. This is now consistent with what is done
in gaih_inet for getaddrinfo.
Resolves: BZ #29607
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Replace atomic_increment and atomic_increment_val with atomic_fetch_add_relaxed.
One case in sem_post.c uses release semantics (see comment above it).
The others are simple counters and do not protect any shared data from
concurrent accesses.
Passes regress on AArch64.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Replace atomic_decrement and atomic_decrement_val with
atomic_fetch_add_relaxed.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Processes cache network interface information such as whether IPv4 or IPv6
are enabled. This is only checked again if the "netlink timestamp" provided
by nscd changed, which is triggered by netlink socket activity.
However, in the epoll handler for the netlink socket, it was missed to
assign the new timestamp to the nscd database. The handler for plain poll
did that properly, copy that over.
This bug caused that e.g. processes which started before network
configuration got unusuable addresses from getaddrinfo, like IPv6 only even
though only IPv4 is available:
https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/1041
It's a bit hard to reproduce, so I verified this by checking the timestamp
on calls to __check_pf manually. Without this patch it's stuck at 1, now
it's increasing on network changes as expected.
Signed-off-by: Fabian Vogt <fvogt@suse.de>
|
|
|
|
I've updated copyright dates in glibc for 2022. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus csu/version.c which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a small change to the copyright notice
in NEWS which should let NEWS get updated automatically next year.
Please remember to include 2022 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
|
|
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dc
https://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
For the legacy ABI with supports 32-bit time_t it calls the 64-bit
time directly, since the LFS symbols calls the 64-bit time_t ones
internally.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
__nss_database_lookup2's extra arguments were left unused in the
nsswitch reloading patch set; this broke compat (default config
ignored) and shadow files (secondary name ignored) which relies on
these fallbacks.
This patch adds in the previous behavior by correcting the
initialization of the database list to reflect the fallbacks. This
means that the nss_database_lookup2 interface no longer needs to be
passed the fallback info, so API and callers were adjusted.
Since all callers needed to be edited anyway, the calls were changed
from __nss_database_lookup2 to the faster __nss_database_get. This
was an intended optimization which was deferred during the initial
lookup changes to avoid touching so many files.
The test case verifies that compat targets work (passwd) and that the
default configuration works (group). Tested on x86-64.
|
|
In commit 745664bd798ec8fd50438605948eea594179fba1 a use-after-free
was fixed, but this led to an occasional double-free. This patch
tracks the "live" allocation better.
Tested manually by a third party.
Related: RHBZ 1927877
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
I've updated copyright dates in glibc for 2021. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus csu/version.c which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a small change to the copyright notice
in NEWS which should let NEWS get updated automatically next year.
Please remember to include 2021 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
|
|
Stitch new ABI and types throughout all NSS callers.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
This patch removes the stat, stat64, lstat, lstat64, fstat, fstat64,
fstatat, and fstatat64 static wrapper and add the symbol on the libc
with the expected names.
Both the prototypes of the internal symbol linked by the static
wrappers and the inline redirectors are also removed from the installed
sys/stat.h header file. The wrapper implementation license LGPL
exception is also removed since it is no longer statically linked to
binaries.
Internally the _STAT_VER* definitions are moved to a arch-specific
xstatver.h file. The internal defines that redirects internals
{f}stat{at} to their {f}xstat{at} counterparts are removed for Linux
(!NO_RTLD_HIDDEN). Hurd still requires them since {f}stat{at} pulls
extra objects that makes the loader build fail otherwise (I haven't
dig into why exactly).
Checked with a build for all affected ABIs. I also checked on x86_64,
i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
While nscd prunes a cache it becomes inconsistent temporarily, which is
visible to clients if that cache is shared. Bump the GC cycle counter so
that the clients notice the modification window.
Uniformly use atomic_fetch_add to modify the GC cycle counter.
|
|
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
The SELinux API deprecated several symbols in its 3.1 release, including
security_context_t, matchpathcon, avc_init, and sidput, which are used in
makedb and nscd. While the usage of these should eventually be replaced by
newer interfaces, this commit disables GCC warnings due to the use of the
above symbols.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
|
|
this means that *always* libnsl is only built as shared library for
backward compatibility and the NSS modules libnss_nis and libnss_nisplus
are not built at all, libnsl's headers aren't installed.
This compatibility is kept only for architectures and ABIs that have
been added in or before version 2.28.
Replacement implementations based on TIRPC, which additionally support
IPv6, are available from <https://github.com/thkukuk/>.
This change does not affect libnss_compat which does not depended
on libnsl since 2.27 and thus can be used without NIS.
libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed
libnsl headers use installed Sun RPC headers), which will be removed in
the following commit.
|
|
The nscd/nscd_helper.c uses __clock_gettime to get current time and on this
basis calculate the relative timeout for poll.
By using __clock_gettime64 on systems with __WORDSIZE == 32 && __TIMESIZE != 64
the timeout is correctly calculated after time_t overflow.
|
|
|
|
|
|
|
|
This macro allows to add type safety to the implementation of NSS
service modules.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
I've updated copyright dates in glibc for 2020. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus libc.texinfo which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a fix to
sysdeps/unix/sysv/linux/powerpc/bits/termios-c_lflag.h where a typo in
the copyright notice meant it failed to be updated automatically.
Please remember to include 2020 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
|
|
|
|
As for gettimeofday, time will be implemented based on clock_gettime
on all platforms and internal code should use clock_gettime
directly. In addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
or __clock_gettime (CLOCK_REALTIME_COARSE) (for Linux case) cannot
fail, using the same rationale for gettimeofday change. And internal
helper was added (time_now).
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, and powerpc-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
Since gettimeofday will shortly be implemented in terms of
clock_gettime on all platforms, internal code should use clock_gettime
directly; in addition to removing a layer of indirection, this will
allow us to remove the PLT-bypass gunk for gettimeofday. (We can't
quite do that yet, but it'll be coming later in this patch series.)
In many cases, the changed code does fewer conversions.
The changed code always assumes __clock_gettime (CLOCK_REALTIME)
cannot fail. Most of the call sites were assuming gettimeofday could
not fail, but a few places were checking for errors. POSIX says
clock_gettime can only fail if the clock constant is invalid or
unsupported, and CLOCK_REALTIME is the one and only clock constant
that's required to be supported. For consistency I grepped the entire
source tree for any other places that checked for errors from
__clock_gettime (CLOCK_REALTIME), found one, and changed it too.
(For the record, POSIX also says gettimeofday can never fail.)
(It would be nice if we could declare that GNU systems will always
support CLOCK_MONOTONIC as well as CLOCK_REALTIME; there are several
places where we are using CLOCK_REALTIME where _MONOTONIC would be
more appropriate, and/or trying to use _MONOTONIC and then falling
back to _REALTIME. But the Hurd doesn't support CLOCK_MONOTONIC yet,
and it looks like adding it would involve substantial changes to
gnumach's internals and API. Oh well.)
A few Hurd-specific files were changed to use __host_get_time instead
of __clock_gettime, as this seemed tidier. We also assume this cannot
fail. Skimming the code in gnumach leads me to believe the only way
it could fail is if __mach_host_self also failed, and our
Hurd-specific code consistently assumes that can't happen, so I'm
going with that.
With the exception of support/support_test_main.c, test cases are not
modified, mainly because I didn't want to have to figure out which
test cases were testing gettimeofday specifically.
The definition of GETTIME in sysdeps/generic/memusage.h had a typo and
was not reading tv_sec at all. I fixed this. It appears nobody has been
generating malloc traces on a machine that doesn't have a superseding
definition.
There are a whole bunch of places where the code could be simplified
by factoring out timespec subtraction and/or comparison logic, but I
want to keep this patch as mechanical as possible.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
This change adds a warning to nscd.conf about running multiple caching
services together and that it may lead to unexpected behaviours. Also we
add a note that enabling the 'shared' option will cause cache hit rates
to be misreported (a side effect of the implementation).
v2
- Rewrite comment to avoid implementation details.
|
|
The function uses the internal service_user type, so it is not
really usable from the outside of glibc. Rename the function
to __nss_database_lookup2 for internal use, and change
__nss_database_lookup to always indicate failure to the caller.
__nss_next already was a compatibility symbol. The new
implementation always fails and no longer calls __nss_next2.
unscd, the alternative nscd implementation, does not use
__nss_database_lookup, so it is not affected by this change.
|
|
This functionality was deprecated in glibc 2.25.
This commit only includes the core changes to remove the
functionality. It does not remove the RES_USE_INET6 handling in the
individual NSS service modules and the res_use_inet6 function.
These changes will happen in future commits.
|
|
The GNU Coding Standards specify that line breaks in expressions
should go before an operator, not after one. This patch fixes various
code to do this. It only changes code that appears to be mostly
following GNU style anyway, not files and directories with
substantially different formatting. It is not exhaustive even for
files using GNU style (for example, changes to sysdeps files are
deferred for subsequent cleanups). Some files changed are shared with
gnulib, but most are specific to glibc. Changes were made manually,
with places to change found by grep (so some cases, e.g. where the
operator was followed by a comment at end of line, are particularly
liable to have been missed by grep, but I did include cases where the
operator was followed by backslash-newline).
This patch generally does not attempt to address other coding style
issues in the expressions changed (for example, missing spaces before
'(', or lack of parentheses to ensure indentation of continuation
lines properly reflects operator precedence).
Tested for x86_64, and with build-many-glibcs.py.
* benchtests/bench-memmem.c (simple_memmem): Break lines before
rather than after operators.
* benchtests/bench-skeleton.c (TIMESPEC_AFTER): Likewise.
* crypt/md5.c (md5_finish_ctx): Likewise.
* crypt/sha256.c (__sha256_finish_ctx): Likewise.
* crypt/sha512.c (__sha512_finish_ctx): Likewise.
* elf/cache.c (load_aux_cache): Likewise.
* elf/dl-load.c (open_verify): Likewise.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* elf/readelflib.c (process_elf_file): Likewise.
* elf/rtld.c (dl_main): Likewise.
* elf/sprof.c (generate_call_graph): Likewise.
* hurd/ctty-input.c (_hurd_ctty_input): Likewise.
* hurd/ctty-output.c (_hurd_ctty_output): Likewise.
* hurd/dtable.c (reauth_dtable): Likewise.
* hurd/getdport.c (__getdport): Likewise.
* hurd/hurd/signal.h (_hurd_interrupted_rpc_timeout): Likewise.
* hurd/hurd/sigpreempt.h (HURD_PREEMPT_SIGNAL_P): Likewise.
* hurd/hurdfault.c (_hurdsig_fault_catch_exception_raise):
Likewise.
* hurd/hurdioctl.c (fioctl): Likewise.
* hurd/hurdselect.c (_hurd_select): Likewise.
* hurd/hurdsig.c (_hurdsig_abort_rpcs): Likewise.
(STOPSIGS): Likewise.
* hurd/hurdstartup.c (_hurd_startup): Likewise.
* hurd/intr-msg.c (_hurd_intr_rpc_mach_msg): Likewise.
* hurd/lookup-retry.c (__hurd_file_name_lookup_retry): Likewise.
* hurd/msgportdemux.c (msgport_server): Likewise.
* hurd/setauth.c (_hurd_setauth): Likewise.
* include/features.h (__GLIBC_USE_DEPRECATED_SCANF): Likewise.
* libio/libioP.h [IO_DEBUG] (CHECK_FILE): Likewise.
* locale/programs/ld-ctype.c (set_class_defaults): Likewise.
* localedata/tests-mbwc/tst_swscanf.c (tst_swscanf): Likewise.
* login/tst-utmp.c (do_check): Likewise.
(simulate_login): Likewise.
* mach/lowlevellock.h (lll_lock): Likewise.
(lll_trylock): Likewise.
* math/test-fenv.c (ALL_EXC): Likewise.
* math/test-fenvinline.c (ALL_EXC): Likewise.
* misc/sys/cdefs.h (__attribute_deprecated_msg__): Likewise.
* nis/nis_call.c (__do_niscall3): Likewise.
* nis/nis_callback.c (cb_prog_1): Likewise.
* nis/nis_defaults.c (searchaccess): Likewise.
* nis/nis_findserv.c (__nis_findfastest_with_timeout): Likewise.
* nis/nis_ismember.c (internal_ismember): Likewise.
* nis/nis_local_names.c (nis_local_principal): Likewise.
* nis/nss_nis/nis-rpc.c (_nss_nis_getrpcbyname_r): Likewise.
* nis/nss_nisplus/nisplus-netgrp.c (_nss_nisplus_getnetgrent_r):
Likewise.
* nis/ypclnt.c (yp_match): Likewise.
(yp_first): Likewise.
(yp_next): Likewise.
(yp_master): Likewise.
(yp_order): Likewise.
* nscd/hstcache.c (cache_addhst): Likewise.
* nscd/initgrcache.c (addinitgroupsX): Likewise.
* nss/nss_compat/compat-pwd.c (copy_pwd_changes): Likewise.
(internal_getpwuid_r): Likewise.
* nss/nss_compat/compat-spwd.c (copy_spwd_changes): Likewise.
* posix/glob.h (__GLOB_FLAGS): Likewise.
* posix/regcomp.c (peek_token): Likewise.
(peek_token_bracket): Likewise.
(parse_expression): Likewise.
* posix/regexec.c (sift_states_iter_mb): Likewise.
(check_node_accept_bytes): Likewise.
* posix/tst-spawn3.c (do_test): Likewise.
* posix/wordexp-test.c (testit): Likewise.
* posix/wordexp.c (parse_tilde): Likewise.
(exec_comm): Likewise.
* posix/wordexp.h (__WRDE_FLAGS): Likewise.
* resource/vtimes.c (TIMEVAL_TO_VTIMES): Likewise.
* setjmp/sigjmp.c (__sigjmp_save): Likewise.
* stdio-common/printf_fp.c (__printf_fp_l): Likewise.
* stdio-common/tst-fileno.c (do_test): Likewise.
* stdio-common/vfprintf-internal.c (vfprintf): Likewise.
* stdlib/strfmon_l.c (__vstrfmon_l_internal): Likewise.
* stdlib/strtod_l.c (round_and_return): Likewise.
(____STRTOF_INTERNAL): Likewise.
* stdlib/tst-strfrom.h (TEST_STRFROM): Likewise.
* string/strcspn.c (STRCSPN): Likewise.
* string/test-memmem.c (simple_memmem): Likewise.
* termios/tcsetattr.c (tcsetattr): Likewise.
* time/alt_digit.c (_nl_parse_alt_digit): Likewise.
* time/asctime.c (asctime_internal): Likewise.
* time/strptime_l.c (__strptime_internal): Likewise.
* time/sys/time.h (timercmp): Likewise.
* time/tzfile.c (__tzfile_compute): Likewise.
|
|
I'm looking at the warnings from building glibc with -Wextra, to see
if we could use -Wextra by default, possibly with a few of its
warnings disabled, and so benefit from warnings in -Wextra but not in
-Wall. (The vast bulk of the extra warnings so produced are from
-Wunused-parameter -Wsign-compare -Wmissing-field-initializers
-Wtype-limits, so I expect those would be disabled at least at first.)
Various miscellaneous warnings show up with -Wextra that it clearly
seems to make sense to fix independent of whether we add -Wextra to
the normal options for building glibc. This patch fixes one:
"initialized field overwritten [-Woverride-init]" in nscd.
Tested for x86_64.
* nscd/connections.c (reqinfo): Initialize SHUTDOWN element only
once.
|
|
The IPv4 address parser in the getaddrinfo function is changed so that
it does not ignore trailing whitespace and all characters after it.
For backwards compatibility, the getaddrinfo function still recognizes
legacy name syntax, such as 192.000.002.010 interpreted as 192.0.2.8
(octal).
This commit does not change the behavior of inet_addr and inet_aton.
gethostbyname already had additional sanity checks (but is switched
over to the new __inet_aton_exact function for completeness as well).
To avoid sending the problematic query names over DNS, commit
6ca53a2453598804a2559a548a08424fca96434a ("resolv: Do not send queries
for non-host-names in nss_dns [BZ #24112]") is needed.
|
|
I've updated copyright dates in glibc for 2019. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files.
Please remember to include 2019 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
* NEWS: Update copyright dates.
* catgets/gencat.c (print_version): Likewise.
* csu/version.c (banner): Likewise.
* debug/catchsegv.sh: Likewise.
* debug/pcprofiledump.c (print_version): Likewise.
* debug/xtrace.sh (do_version): Likewise.
* elf/ldconfig.c (print_version): Likewise.
* elf/ldd.bash.in: Likewise.
* elf/pldd.c (print_version): Likewise.
* elf/sotruss.sh: Likewise.
* elf/sprof.c (print_version): Likewise.
* iconv/iconv_prog.c (print_version): Likewise.
* iconv/iconvconfig.c (print_version): Likewise.
* locale/programs/locale.c (print_version): Likewise.
* locale/programs/localedef.c (print_version): Likewise.
* login/programs/pt_chown.c (print_version): Likewise.
* malloc/memusage.sh (do_version): Likewise.
* malloc/memusagestat.c (print_version): Likewise.
* malloc/mtrace.pl: Likewise.
* manual/libc.texinfo: Likewise.
* nptl/version.c (banner): Likewise.
* nscd/nscd.c (print_version): Likewise.
* nss/getent.c (print_version): Likewise.
* nss/makedb.c (print_version): Likewise.
* posix/getconf.c (main): Likewise.
* scripts/test-installation.pl: Likewise.
* sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
