| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As reported in bug 32045, it's incorrect for strtod/nan functions to
set errno based on overflowing payload (strtod should only set errno
for overflow / underflow of its actual result, and potentially if
nothing in the string can be parsed as a number at all; nan should be
a pure function that never sets it). Save and restore errno around
the internal strtoull call and add associated test coverage.
Tested for x86_64.
|
|
There are two separate sets of tests of NaN payloads in glibc:
* libm-test-{get,set}payload* verify that getpayload, setpayload,
setpayloadsig and __builtin_nan functions are consistent in their
payload handling.
* test-nan-payload verifies that strtod-family functions and the
not-built-in nan functions are consistent in their payload handling.
Nothing, however, connects the two sets of functions (i.e., verifies
that strtod / nan are consistent with getpayload / setpayload /
__builtin_nan).
Improve test-nan-payload to check actual payload value with getpayload
rather than just verifying that the strtod and nan functions produce
the same NaN. Also check that the NaNs produced aren't signaling and
extend the tests to cover _FloatN / _FloatNx.
Tested for x86_64.
|
|
These functions are exp10m1, exp2m1, log10p1, log2p1.
Also regenerated ulps on x86_64.
For each format, there are 4 values, one for each rounding mode.
(For the intel96 format, there are 8 values, 4 for Intel hardware,
and 4 for AMD hardware. However, regen-ulps was only run on Intel.
It should be run in a separate patch on a AMD x86_64.)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Add a FAIL test failure helper analogous to FAIL_RET, that does not
cause the current function to return, providing a standardized way to
report a test failure with a message supplied while permitting the
caller to continue executing, for further reporting, cleaning up, etc.
Update existing test cases that provide a conflicting definition of FAIL
by removing the local FAIL definition and then as follows:
- tst-fortify-syslog: provide a meaningful message in addition to the
file name already added by <support/check.h>; 'support_record_failure'
is already called by 'support_print_failure_impl' invoked by the new
FAIL test failure helper.
- tst-ctype: no update to FAIL calls required, with the name of the file
and the line number within of the failure site additionally included
by the new FAIL test failure helper, and error counting plus count
reporting upon test program termination also already provided by
'support_record_failure' and 'support_report_failure' respectively,
called by 'support_print_failure_impl' and 'adjust_exit_status' also
respectively. However in a number of places 'printf' is called and
the error count adjusted by hand, so update these places to make use
of FAIL instead. And last but not least adjust the final summary just
to report completion, with any error count following as reported by
the test driver.
- test-tgmath2: no update to FAIL calls required, with the name of the
file of the failure site additionally included by the new FAIL test
failure helper. Also there is no need to track the return status by
hand as any call to FAIL will eventually cause the test case to return
an unsuccesful exit status regardless of the return status from the
test function, via a call to 'adjust_exit_status' made by the test
driver.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
Changes in v2:
- added larger error for long double on AMD reported by Adhemerval
(https://sourceware.org/pipermail/libc-alpha/2024-June/157755.html)
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the exp2m1 and exp10m1 functions (exp2(x)-1 and
exp10(x)-1, like expm1).
As with other such functions, these use type-generic templates that
could be replaced with faster and more accurate type-specific
implementations in future. Test inputs are copied from those for
expm1, plus some additions close to the overflow threshold (copied
from exp2 and exp10) and also some near the underflow threshold.
exp2m1 has the unusual property of having an input (M_MAX_EXP) where
whether the function overflows (under IEEE semantics) depends on the
rounding mode. Although these could reasonably be XFAILed in the
testsuite (as we do in some cases for arguments very close to a
function's overflow threshold when an error of a few ulps in the
implementation can result in the implementation not agreeing with an
ideal one on whether overflow takes place - the testsuite isn't smart
enough to handle this automatically), since these functions aren't
required to be correctly rounding, I made the implementation check for
and handle this case specially.
The Makefile ordering expected by lint-makefiles for the new functions
is a bit peculiar, but I implemented it in this patch so that the test
passes; I don't know why log2 also needed moving in one Makefile
variable setting when it didn't in my previous patches, but the
failure showed a different place was expected for that function as
well.
The powerpc64le IFUNC setup seems not to be as self-contained as one
might hope; it shouldn't be necessary to add IFUNCs for new functions
such as these simply to get them building, but without setting up
IFUNCs for the new functions, there were undefined references to
__GI___expm1f128 (that IFUNC machinery results in no such function
being defined, but doesn't stop include/math.h from doing the
redirection resulting in the exp2m1f128 and exp10m1f128
implementations expecting to call it).
Tested for x86_64 and x86, and with build-many-glibcs.py.
|
|
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the log10p1 functions (log10(1+x): like log1p, but for
base-10 logarithms).
This is directly analogous to the log2p1 implementation (except that
whereas log2p1 has a smaller underflow range than log1p, log10p1 has a
larger underflow range). The test inputs are copied from those for
log1p and log2p1, plus a few more inputs in that wider underflow
range.
Tested for x86_64 and x86, and with build-many-glibcs.py.
|
|
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the logp1 functions (aliases for log1p functions - the
name is intended to be more consistent with the new log2p1 and
log10p1, where clearly it would have been very confusing to name those
functions log21p and log101p). As aliases rather than new functions,
the content of this patch is somewhat different from those actually
adding new functions.
Tests are shared with log1p, so this patch *does* mechanically update
all affected libm-test-ulps files to expect the same errors for both
functions.
The vector versions of log1p on aarch64 and x86_64 are *not* updated
to have logp1 aliases (and thus there are no corresponding header,
tests, abilist or ulps changes for vector functions either). It would
be reasonable for such vector aliases and corresponding changes to
other files to be made separately. For now, the log1p tests instead
avoid testing logp1 in the vector case (a Makefile change is needed to
avoid problems with grep, used in generating the .c files for vector
function tests, matching more than one ALL_RM_TEST line in a file
testing multiple functions with the same inputs, when it assumes that
the .inc file only has a single such line).
Tested for x86_64 and x86, and with build-many-glibcs.py.
|
|
scalb is a deprecated interface which was obsolescent in POSIX.1-2001,
removed in POSIX.1-2008, never made to C standard. significant was
originally from BSD and never made in any standard. Fix BZ #31760 by
not providing _FloatN aliases for them.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
It basically copy the already in place rules for dynamic tests for
auto-generated math functions for all support types. To avoid the
need to duplicate .inc files, a .SECONDEXPANSION rules is adeed for
the gen-libm-test.py generation.
New tests are added on the new rules 'libm-test-funcs-auto-static',
'libm-test-funcs-noauto-static', and 'libm-test-funcs-narrow-static';
similar to the non-static counterparts.
To avoid add extra build and disk requirement, the new math static
tests are only enable with a new define 'build-math-static-tests'.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
Add start and end indicators that identify the test being run in the
verbose output. Better identify the tests for max errors in the
summary output. Count each exception checked for each test. Remove
double counting of tests for the check_<type> functions other than
check_float_internal. Rename print_max_error and
print_complex_max_error to check_max_error and check_complex_max_error
respectively since they have side effects.
Co-Authored-By: Carlos O'Donell <carlos@redhat.com>
Reviewed-By: Joseph Myers <josmyers@redhat.com>
|
|
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the log2p1 functions (log2(1+x): like log1p, but for
base-2 logarithms).
This illustrates the intended structure of implementations of all
these function families: define them initially with a type-generic
template implementation. If someone wishes to add type-specific
implementations, it is likely such implementations can be both faster
and more accurate than the type-generic one and can then override it
for types for which they are implemented (adding benchmarks would be
desirable in such cases to demonstrate that a new implementation is
indeed faster).
The test inputs are copied from those for log1p. Note that these
changes make gen-auto-libm-tests depend on MPFR 4.2 (or later).
The bulk of the changes are fairly generic for any such new function.
(sysdeps/powerpc/nofpu/Makefile only needs changing for those
type-generic templates that use fabs.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
|
|
Allow the libm-test-driver based tests to have their verbosity set based
on the GLIBC_TEST_LIBM_VERBOSE environment variable. This allows the entire
testsuite to be run with a non-default verbosity.
While here check the conversion for the verbose option as well.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Starting from glibc 2.1, crt1.o contains _IO_stdin_used which is checked
by _IO_check_libio to provide binary compatibility for glibc 2.0. Add
crt1-2.0.o for tests against glibc 2.0. Define tests-2.0 for glibc 2.0
compatibility tests. Add and update glibc 2.0 compatibility tests for
stderr, matherr and pthread_kill.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
The implementations of trunc functions using x87 floating point (i386 and
x86_64 long double only) traps when FE_INEXACT is enabled. Although
this is a GNU extension outside the scope of the C standard, other
architectures that also support traps do not show this behavior.
The fix moves the implementation to a common one that holds any
exceptions with a 'fnclex' (libc_feholdexcept_setround_387).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
The implementations of floor functions using x87 floating point (i386 and
86_64 long double only) traps when FE_INEXACT is enabled. Although
this is a GNU extension outside the scope of the C standard, other
architectures that also support traps do not show this behavior.
The fix moves the implementation to a common one that holds any
exceptions with a 'fnclex' (libc_feholdexcept_setround_387).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
The implementations of ceil functions using x87 floating point (i386 and
x86_64 long double only) traps when FE_INEXACT is enabled. Although
this is a GNU extension outside the scope of the C standard, other
architectures that also support traps do not show this behavior.
The fix moves the implementation to a common one that holds any
exceptions with a 'fnclex' (libc_feholdexcept_setround_387).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
|
Reflow all long lines adding comment terminators.
Sort all reflowed text using scripts/sort-makefile-lines.py.
No code generation changes observed in binary artifacts.
No regressions on x86_64 and i686.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
Testing for `None`-ness with `==` operator is frowned upon and causes
warnings in at least "LGTM" python linter. Fix that.
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
The exp10, exp10l, fma, fmaf, and fmal default implementation do not
implement the appropriate semantics nor with an reasonable accuracy.
They are also not used by any supported port.
|
|
WG14 decided to use the name C23 as the informal name of the next
revision of the C standard (notwithstanding the publication date in
2024). Update references to C2X in glibc to use the C23 name.
This is intended to update everything *except* where it involves
renaming files (the changes involving renaming tests are intended to
be done separately). In the case of the _ISOC2X_SOURCE feature test
macro - the only user-visible interface involved - support for that
macro is kept for backwards compatibility, while adding
_ISOC23_SOURCE.
Tested for x86_64.
|
|
Remove the error handling wrapper from exp10. This is very similar to
the changes done to exp and exp2, except that we also need to handle
pow10 and pow10l.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
The feupdateenv tests added by 802aef27b2 do not restore the floating
point mask, which might keep some floating point exception enabled and
thus make the feupdateenv_single_test raise an unexpected signal.
Checked on x86_64-linux-gnu and aarch64-linux-gnu (on Apple M1 trapping
is supported).
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
|
Linux 6.7 removed ia64 from the official tree [1], following the general
principle that a glibc port needs upstream support for the architecture
in all the components it depends on (binutils, GCC, and the Linux
kernel).
Apart from the removal of sysdeps/ia64 and sysdeps/unix/sysv/linux/ia64,
there are updates to various comments referencing ia64 for which removal
of those references seemed appropriate. The configuration is removed
from README and build-many-glibcs.py.
The CONTRIBUTED-BY, elf/elf.h, manual/contrib.texi (the porting
mention), *.po files, config.guess, and longlong.h are not changed.
For Linux it allows cleanup some clone2 support on multiple files.
The following bug can be closed as WONTFIX: BZ 22634 [2], BZ 14250 [3],
BZ 21634 [4], BZ 10163 [5], BZ 16401 [6], and BZ 11585 [7].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=43ff221426d33db909f7159fdf620c3b052e2d1c
[2] https://sourceware.org/bugzilla/show_bug.cgi?id=22634
[3] https://sourceware.org/bugzilla/show_bug.cgi?id=14250
[4] https://sourceware.org/bugzilla/show_bug.cgi?id=21634
[5] https://sourceware.org/bugzilla/show_bug.cgi?id=10163
[6] https://sourceware.org/bugzilla/show_bug.cgi?id=16401
[7] https://sourceware.org/bugzilla/show_bug.cgi?id=11585
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
libc_feupdateenv_riscv should check for FE_DFL_ENV, similar to
libc_fesetenv_riscv.
Also extend the test-fenv.c to test fenvupdate.
Checked on riscv under qemu-system.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
According to ISO C23 (7.6.4.4), fesetexcept is supposed to set
floating-point exception flags without raising a trap (unlike
feraiseexcept, which is supposed to raise a trap if feenableexcept
was called with the appropriate argument).
The flags can be set in the 387 unit or in the SSE unit. When we need
to clear a flag, we need to do so in both units, due to the way
fetestexcept is implemented.
When we need to set a flag, it is sufficient to do it in the SSE unit,
because that is guaranteed to not trap. However, on i386 CPUs that have
only a 387 unit, set the flags in the 387, as long as this cannot trap.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
According to ISO C23 (7.6.4.4), fesetexcept is supposed to set
floating-point exception flags without raising a trap (unlike
feraiseexcept, which is supposed to raise a trap if feenableexcept
was called with the appropriate argument).
The flags can be set in the 387 unit or in the SSE unit. To set
a flag, it is sufficient to do it in the SSE unit, because that is
guaranteed to not trap. However, on i386 CPUs that have only a
387 unit, set the flags in the 387, as long as this cannot trap.
Checked on i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
According to ISO C23 (7.6.4.4), fesetexcept is supposed to set
floating-point exception flags without raising a trap (unlike
feraiseexcept, which is supposed to raise a trap if feenableexcept was
called with the appropriate argument).
This is a side-effect of how we implement the GNU extension
feenableexcept, where feenableexcept/fesetenv/fesetmode/feupdateenv
might issue prctl (PR_SET_FPEXC, PR_FP_EXC_PRECISE) depending of the
argument. And on PR_FP_EXC_PRECISE, setting a floating-point exception
flag triggers a trap.
To make the both functions follow the C23, fesetexcept and
fesetexceptflag now fail if the argument may trigger a trap.
The math tests now check for an value different than 0, instead
of bail out as unsupported for EXCEPTION_SET_FORCES_TRAP.
Checked on powerpc64le-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
May discard sign of 0 - auto tests for -0 and -0x1p-10000 updated accordingly.
|
|
May discard sign of zero.
|
|
This includes some utility headers for evaluating polynomials using
various schemes.
|
|
Add support for a no-mathvec flag to gen-auto-libm-tests.c.
Update input test sin (-0.0) to be skipped in vector math libraries and
regenerate testcases.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
|
|
GCC was the only compiler affected by the issue with
__builtin_isinf_sign and float128.
Fix BZ #30550.
Reported-by: Qiu Chaofan <qiucofan@cn.ibm.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
|
|
The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper
with SVID error handling around the new code. There is no new symbol
version nor compatibility code on !LIBM_SVID_COMPAT targets
(e.g. riscv).
The ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation. For both i686 and m68k,
which provive arch specific implementation, wrappers are added so
no new symbol are added (which would require to change the
implementations).
It shows an small improvement, the results for fmod:
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 12.5049 | 9.40992
x86_64 (Ryzen 9) | normal | 296.939 | 296.738
x86_64 (Ryzen 9) | close-exponents | 16.0244 | 13.119
aarch64 (N1) | subnormal | 6.81778 | 4.33313
aarch64 (N1) | normal | 155.620 | 152.915
aarch64 (N1) | close-exponents | 8.21306 | 5.76138
armhf (N1) | subnormal | 15.1083 | 14.5746
armhf (N1) | normal | 244.833 | 241.738
armhf (N1) | close-exponents | 21.8182 | 22.457
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
|
|
This uses a new algorithm similar to already proposed earlier [1].
With x = mx * 2^ex and y = my * 2^ey (mx, my, ex, ey being integers),
the simplest implementation is:
mx * 2^ex == 2 * mx * 2^(ex - 1)
while (ex > ey)
{
mx *= 2;
--ex;
mx %= my;
}
With mx/my being mantissa of double floating pointer, on each step the
argument reduction can be improved 8 (which is sizeof of uint32_t minus
MANTISSA_WIDTH plus the signal bit):
while (ex > ey)
{
mx << 8;
ex -= 8;
mx %= my;
} */
The implementation uses builtin clz and ctz, along with shifts to
convert hx/hy back to doubles. Different than the original patch,
this path assume modulo/divide operation is slow, so use multiplication
with invert values.
I see the following performance improvements using fmod benchtests
(result only show the 'mean' result):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 17.2549 | 12.0318
x86_64 (Ryzen 9) | normal | 85.4096 | 49.9641
x86_64 (Ryzen 9) | close-exponents | 19.1072 | 15.8224
aarch64 (N1) | subnormal | 10.2182 | 6.81778
aarch64 (N1) | normal | 60.0616 | 20.3667
aarch64 (N1) | close-exponents | 11.5256 | 8.39685
I also see similar improvements on arm-linux-gnueabihf when running on
the N1 aarch64 chips, where it a lot of soft-fp implementation (for
modulo, and multiplication):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
armhf (N1) | subnormal | 11.6662 | 10.8955
armhf (N1) | normal | 69.2759 | 34.1524
armhf (N1) | close-exponents | 13.6472 | 18.2131
Instead of using the math_private.h definitions, I used the
math_config.h instead which is used on newer math implementations.
Co-authored-by: kirill <kirill.okhotnikov@gmail.com>
[1] https://sourceware.org/pipermail/libc-alpha/2020-November/119794.html
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
|
|
This uses a new algorithm similar to already proposed earlier [1].
With x = mx * 2^ex and y = my * 2^ey (mx, my, ex, ey being integers),
the simplest implementation is:
mx * 2^ex == 2 * mx * 2^(ex - 1)
while (ex > ey)
{
mx *= 2;
--ex;
mx %= my;
}
With mx/my being mantissa of double floating pointer, on each step the
argument reduction can be improved 11 (which is sizeo of uint64_t minus
MANTISSA_WIDTH plus the signal bit):
while (ex > ey)
{
mx << 11;
ex -= 11;
mx %= my;
} */
The implementation uses builtin clz and ctz, along with shifts to
convert hx/hy back to doubles. Different than the original patch,
this path assume modulo/divide operation is slow, so use multiplication
with invert values.
I see the following performance improvements using fmod benchtests
(result only show the 'mean' result):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
x86_64 (Ryzen 9) | subnormals | 19.1584 | 12.5049
x86_64 (Ryzen 9) | normal | 1016.51 | 296.939
x86_64 (Ryzen 9) | close-exponents | 18.4428 | 16.0244
aarch64 (N1) | subnormal | 11.153 | 6.81778
aarch64 (N1) | normal | 528.649 | 155.62
aarch64 (N1) | close-exponents | 11.4517 | 8.21306
I also see similar improvements on arm-linux-gnueabihf when running on
the N1 aarch64 chips, where it a lot of soft-fp implementation (for
modulo, clz, ctz, and multiplication):
Architecture | Input | master | patch
-----------------|-----------------|----------|--------
armhf (N1) | subnormal | 15.908 | 15.1083
armhf (N1) | normal | 837.525 | 244.833
armhf (N1) | close-exponents | 16.2111 | 21.8182
Instead of using the math_private.h definitions, I used the
math_config.h instead which is used on newer math implementations.
Co-authored-by: kirill <kirill.okhotnikov@gmail.com>
[1] https://sourceware.org/pipermail/libc-alpha/2020-November/119794.html
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
|
|
This change was forgotten in commit cf7ffdd.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
This pair yields an error of 1 ulp in binary32, whereas the current
maximal known error for hypotf on x86_64 is zero:
Checking hypot with glibc-2.37
hypot 0 -1 -0x1.003222p-20,-0x1.6a2d58p-32 [0.501] 0.500001 0.500000001392678
libm gives 0x1.003224p-20
mpfr gives 0x1.003222p-20
See https://sourceware.org/pipermail/libc-alpha/2023-February/145432.html
and https://sourceware.org/pipermail/libc-alpha/2023-February/145442.html
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
|
|
<tgmath.h> implements semantics for integer generic arguments that
handle cases involving _FloatN / _FloatNx types as specified in TS
18661-3 plus some defect fixes.
C2x has further changes to the semantics for <tgmath.h> macros with
such types, which should also be considered defect fixes (although
handled through the integration of TS 18661-3 in C2x rather than
through an issue tracking process). Specifically, the rules were
changed because of problems raised with using the macros with the
evaluation format types such as float_t and _Float32_t: the older
version of the rules didn't allow passing _FloatN / _FloatNx types to
the narrowing macros returning float or double, or passing float /
double / long double to the narrowing macros returning _FloatN /
_FloatNx, which was a problem with the evaluation format types which
could be either kind of type depending on the value of
FLT_EVAL_METHOD.
Thus the new rules allow cases of mixing types which were not allowed
before, and, as part of the changes, the handling of integer arguments
was also changed: if there is any _FloatNx generic argument, integer
generic arguments are treated as _Float32x (not double), while the
rule about treating integer arguments to narrowing macros returning
_FloatN or _FloatNx as _Float64 not double was removed (no longer
needed now double is a valid argument to such macros).
I've implemented the changes in GCC's __builtin_tgmath, which thus
requires updates to glibc's test expectations so that the tests
continue to build with GCC 13 (the test is also updated to test the
argument types that weren't allowed before but are now valid under C2x
rules).
Given those test changes, it's then also necessary to fix the
implementations in <tgmath.h> to have appropriate semantics with older
GCC so that the tests pass with GCC versions before GCC 13 as well.
For some cases (non-narrowing macros with two or three generic
arguments; narrowing macros returning _Float32x), the older version of
__builtin_tgmath doesn't correspond sufficiently well to C2x
semantics, so in those cases <tgmath.h> is adjusted to use the older
macro implementation instead of __builtin_tgmath. The older macro
implementation is itself adjusted to give the desired semantics, with
GCC 7 and later. (It's not possible to get the right semantics in all
cases for the narrowing macros with GCC 6 and before when the _FloatN
/ _FloatNx names are typedefs rather than distinct types.)
Tested as follows: with the full glibc testsuite for x86_64, GCC 6, 7,
11, 13; with execution of the math/tests for aarch64, arm, powerpc and
powerpc64le, GCC 6, 7, 12 and 13 (powerpc64le only with GCC 12 and
13); with build-many-glibcs.py with GCC 6, 7, 12 and 13.
|
|
Reviewed-by: Fangrui Song <maskray@google.com>
|
|
GCC 13 has added more _FloatN and _FloatNx versions of existing
<math.h> and <complex.h> built-in functions, for use in libstdc++-v3.
This breaks the glibc build because of how those functions are defined
as aliases to functions with the same ABI but different types. Add
appropriate -fno-builtin-* options for compiling relevant files, as
already done for the case of long double functions aliasing double
ones and based on the list of files used there.
I fixed some mistakes in that list of double files that I noticed
while implementing this fix, but there may well be more such
(harmless) cases, in this list or the new one (files that don't
actually exist or don't define the named functions as aliases so don't
need the options). I did try to exclude cases where glibc doesn't
define certain functions for _FloatN or _FloatNx types at all from the
new uses of -fno-builtin-* options. As with the options for double
files (see the commit message for commit
49348beafe9ba150c9bd48595b3f372299bddbb0, "Fix build with GCC 10 when
long double = double."), it's deliberate that the options are used
even if GCC currently doesn't have a built-in version of a given
functions, so providing some level of future-proofing against more
such built-in functions being added in future.
Tested with build-many-glibcs.py for aarch64-linux-gnu
powerpc-linux-gnu powerpc64le-linux-gnu x86_64-linux-gnu (compilers
and glibcs builds) with GCC mainline.
|
|
With GCC 13, _FloatN and _FloatNx types, when they exist, are distinct
types like they are in C with GCC 7 and later, rather than typedefs
for types such as float, double or long double.
This breaks the templated iseqsig implementation for C++ in <math.h>,
when used with types that were previously implemented as aliases. Add
the necessary definitions for _Float32, _Float64, _Float128 (when the
same format as long double), _Float32x and _Float64x in this case, so
that iseqsig can be used with such types in C++ with GCC 13 as it
could with previous GCC versions.
Also add tests for calling iseqsig in C++ with arguments of such types
(more minimal than existing tests, so that they can work with older
GCC versions and without relying on any C++ library support for the
types or on hardcoding details of their formats). The LDBL_MANT_DIG
!= 106 conditionals on some tests are because the type-generic
comparison macros have undefined behavior when neither argument has a
type whose set of values is a subset of those for the type of the
other argument, which applies when one argument is IBM long double and
the other is an IEEE format wider than binary64.
Tested with build-many-glibcs.py glibcs build for aarch64-linux-gnu
i686-linux-gnu mips-linux-gnu mips64-linux-gnu-n32 powerpc-linux-gnu
powerpc64le-linux-gnu x86_64-linux-gnu.
|
|
The Z modifier is a nonstandard synonymn for z (that predates z
itself) and compiler might issue an warning for in invalid
conversion specifier.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
This patch adds following input to atanh accuracy test.
0x1.f80094p-8
Tested on x86-64 and i686 platforms.
Other platforms may have to regenerate ulps file.
Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
|
|
This patch adds following inputs:
0x1.bcab29da0e947p-54 0x1.bc41f4d2294b8p-54
0x1.a11891ec004d4p-348 0x1.814830510be26p-348
0x1.b836ed678be29p-588 0x1.b7be6f5a03a8cp-588
0x1.a83f842ef3f73p-633 0x1.a799d8a6677ep-633
to atan2 tests and updates x86_64 double atan2 ulps.
This fixes BZ #28765.
Reviewed-By: Paul Zimmermann <Paul.Zimmermann@inria.fr>
|
|
Converting double precision constants to float is now affected by the
runtime dynamic rounding mode instead of being evaluated at compile
time with default rounding mode (except static object initializers).
This can change the computed result and cause performance regression.
The known correctness issues (increased ulp errors) are already fixed,
this patch fixes remaining cases of unnecessary runtime conversions.
Add float M_* macros to math.h as new GNU extension API. To avoid
conversions the new M_* macros are used and instead of casting double
literals to float, use float literals (only required if the conversion
is inexact).
The patch was tested on aarch64 where the following symbols had new
spurious conversion instructions that got fixed:
__clog10f
__gammaf_r_finite@GLIBC_2.17
__j0f_finite@GLIBC_2.17
__j1f_finite@GLIBC_2.17
__jnf_finite@GLIBC_2.17
__kernel_casinhf
__lgamma_negf
__log1pf
__y0f_finite@GLIBC_2.17
__y1f_finite@GLIBC_2.17
cacosf
cacoshf
casinhf
catanf
catanhf
clogf
gammaf_positive
Fixes bug 28713.
Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
|
