| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Bug 16198 is x86_64 fegetenv wrongly masking exceptions for which
traps are enabled, because that's a side-effect of the fnstenv
instruction. This patch fixes it to use fldenv immediately after
fnstenv, like the i386 version. Tested x86_64 and x86.
[BZ #16198]
* sysdeps/x86_64/fpu/fegetenv.c (fegetenv): Use fldenv after
fnstenv.
* math/test-fenv-preserve.c: New file.
* math/Makefile (tests): Add test-fenv-preserve.
|
|
gen-auto-libm-tests presently allows but does not require underflow
exceptions for results with magnitude in the range (greatest
subnormal, least normal].
In some cases, the magnitude of the exact result is very slightly
above the least normal, but rounding in the implementation results in
it effectively computing an infinite-precision result that is slightly
below the least normal, so raising an underflow exception. This is in
accordance with the documented accuracy goals, but results in
testsuite failures.
This patch changes the logic to allow underflows when the mathematical
result is up to 0.5ulp above the least normal (so in any case where
the round-to-nearest result is the least normal). Ideally underflows
in all these cases would be accepted only when an underflow with the
actual result is consistent with the rounding mode (in FE_TOWARDZERO
mode, a return value of the least normal implies that the
infinite-precision result did not underflow so there should be no
underflow exception, for example), so as to match the documented goals
more precisely - whereas at present the tests for exceptions are
completely independent of the tests of the returned values. (The same
applies to overflow exceptions as well - they too should be checked
for consistency with the result, as in FE_TOWARDZERO mode a result
1ulp below the largest finite value should be inconsistent with an
overflow exception and cause a failure with overflow rather than
simply being considered a 1ulp error when overflow is expected.) But
the present patch at least deals with the cases causing spurious
failures so that (a) certain existing tests no longer need to be
marked as having spurious exceptions (such markings in
auto-libm-test-in end up applying to more cases than just those they
are needed for) and (b) log1p can be tested in all rounding modes
without introducing more such failures. This patch duly moves tests
of log1p to ALL_RM_TEST.
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16357]
[BZ #16599]
* math/gen-auto-libm-tests.c (fp_format_desc): Add field
min_plus_half.
(fp_formats): Update initializers.
(init_fp_formats): Initialize new field.
(output_for_one_input_case): Allow underflow for results up to
min_plus_half.
* math/libm-test.inc (log1p_test): Use ALL_RM_TEST.
* math/auto-libm-test-in: Don't mark some underflows from asin and
atanh as spurious.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
The dbl-64 version of exp needs round-to-nearest mode for its internal
computations, but that has the consequence of inappropriate
overflowing and underflowing results in other rounding modes. This
patch fixes this by recomputing the relevant results in cases where
the round-to-nearest result overflows to infinity or underflows to
zero (most of the diffs are actually just consequent reindentation).
Tests are enabled in all rounding modes for complex functions using
exp - but not for cexp because it turns out there are bugs causing
spurious underflows for cexp for some tests, which will need to be
fixed separately (I suspect ccos ccosh csin csinh ctan ctanh have
similar bugs, just not shown by the present set of test inputs).
Tested x86_64 and x86 and ulps updated accordingly.
[BZ #16284]
* sysdeps/ieee754/dbl-64/e_exp.c (__ieee754_exp): Use original
rounding mode to recompute results that overflow to infinity or
underflow to zero.
* math/auto-libm-test-in: Don't mark tests as expected to fail for
bug 16284.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (ccos_test): Use ALL_RM_TEST.
(ccosh_test): Likewise.
(csin_test_data): Use plus_oflow.
(csin_test): Use ALL_RM_TEST.
(csinh_test_data): Use plus_oflow.
(csinh_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
According to ISO C Annex F, log (1) should be +0 in all rounding
modes, but some implementations in glibc wrongly return -0 in
round-downward mode (mapping to log1p (x - 1) is problematic because 1
- 1 is -0 in round-downward mode, and log1p (-0) is -0). This patch
fixes this. (It helps with some implementations of other functions
such as acosh, log2 and log10 that call out to log, but not enough to
enable all-rounding-modes testing for those functions without further
fixes to other implementations of them.)
Tested x86_64 and x86 and ulps updated accordingly, and did spot tests
for mips64 for the ldbl-128 fix, and i586 for the sysdeps/i386/fpu
implementations shadowed by those in sysdeps/i386/i686/fpu.
[BZ #16731]
* sysdeps/i386/fpu/e_log.S (__ieee754_log): Take absolute value
when x - 1 is zero.
* sysdeps/i386/fpu/e_logf.S (__ieee754_logf): Likewise.
* sysdeps/i386/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/i386/i686/fpu/e_logl.S (__ieee754_logl): Likewise.
* sysdeps/ieee754/dbl-64/e_log.c (__ieee754_log): Return +0 when
argument is 1.
* sysdeps/ieee754/ldbl-128/e_logl.c (__ieee754_logl): Likewise.
* sysdeps/x86_64/fpu/e_logl.S: Take absolute value when x - 1 is
zero.
* math/libm-test.inc (log_test): Use ALL_RM_TEST.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch makes libm-test.inc tests of most functions use ALL_RM_TEST
unless there was some reason to defer that change for a particular
function.
I started out planning to defer the change for pow (bug 16315), cexp /
ccos / ccosh / csin / csinh (likely fallout from exp, bug 16284) and
cpow (exact expectations for signs of exact zero results not wanted).
Testing on x86_64 and x86 showed additional failures for acosh, cacos,
catan, catanh, clog, clog10, jn, log, log10, log1p, log2, tgamma, yn,
so making the change for those functions was deferred as well, pending
investigation to show which of these represent distinct bugs (some
such bugs may already be filed) and appropriate fixing / XFAILing.
Failures include wrong signs of zero results, errors slightly above
the 9ulp bound (in such cases it may make sense for functions to set
round-to-nearest internally to reduce error accumulation), large
errors and incorrect overflow/underflow for the rounding mode (with
consequent missing errno settings in some cases). It's possible some
could be issues with test expectations, though I didn't notice any
that were obviously like that (I added NO_TEST_INLINE for cases that
were failing for ildoubl on x86 and where it seemed reasonable for
them to fail for the fast-math inlines).
There may of course be failures on other architectures for functions
that didn't fail on x86_64 or x86, in which case the usual rule
applies: file a bug (preferably identifying the underlying problem
function, in cases where function A calls function B and a problem
with function B may present in the test results for function A) if not
already in Bugzilla then fix or XFAIL.
Tested x86_64 and x86 and ulps updated accordingly.
* math/libm-test.inc (asinh_test): Use ALL_RM_TEST.
(atan_test): Likewise.
(atanh_test_data): Use NO_TEST_INLINE for two tests.
(atanh_test): Use ALL_RM_TEST.
(atan2_test_data): Likewise.
(cabs_test): Likewise.
(cacosh_test): Likewise.
(carg_test): Likewise.
(casin_test): Likewise.
(casinh_test): Likewise.
(cbrt_test): Likewise.
(csqrt_test): Likewise.
(erf_test): Likewise.
(erfc_test): Likewise.
(pow10_test): Likewise.
(exp2_test): Likewise.
(hypot_test): Likewise.
(j0_test): Likewise.
(j1_test): Likewise.
(lgamma_test): Likewise.
(gamma_test): Likewise.
(sincos_test): Likewise.
(tanh_test): Likewise.
(y0_test): Likewise.
(y1_test): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch continues improvements to all-rounding-mode libm testing by
making testing with ALL_RM_TEST support test results from
auto-libm-test-out. gen-libm-test.pl is adapted to generate
appropriate output with results for each rounding mode, with
AUTO_TESTS_* calls no longer specifying a rounding mode. Where there
were separate functions in libm-test.inc to test a function in each
rounding mode, using AUTO_TESTS_* to list the tests for each rounding
mode, those are converted to using ALL_RM_TEST (so generally this
patch doesn't change the sets of tests run in each rounding mode,
except that in various cases special-case tests given directly in
libm-test.inc were previously run only for round-to-nearest, and now
are run for all rounding modes).
Tested x86_64 and x86.
* math/gen-libm-test.pl (generate_testfile): Expect only function
name as argument to AUTO_TESTS_* and pass results for all rounding
modes to parse_args.
(parse_auto_input): Separate inputs of automatic tests from
outputs before storing in %auto_tests.
* math/libm-test.inc (acos_test_data): Update call to
AUTO_TESTS_f_f.
(acos_test): Use ALL_RM_TEST.
(acos_tonearest_test_data): Remove.
(acos_test_tonearest): Likewise.
(acos_towardzero_test_data): Likewise.
(acos_test_towardzero): Likewise.
(acos_downward_test_data): Likewise.
(acos_test_downward): Likewise.
(acos_upward_test_data): Likewise.
(acos_test_upward): Likewise.
(acosh_test_data): Update call to AUTO_TESTS_f_f.
(asin_test_data): Likewise.
(asin_test): Use ALL_RM_TEST.
(asin_tonearest_test_data): Remove.
(asin_test_tonearest): Likewise.
(asin_towardzero_test_data): Likewise.
(asin_test_towardzero): Likewise.
(asin_downward_test_data): Likewise.
(asin_test_downward): Likewise.
(asin_upward_test_data): Likewise.
(asin_test_upward): Likewise.
(asinh_test_data): Update call to AUTO_TESTS_f_f.
(atan_test_data): Likewise.
(atanh_test_data): Likewise.
(atan2_test_data): Update call to AUTO_TESTS_ff_f.
(cabs_test_data): Update call to AUTO_TESTS_c_f.
(carg_test_data): Likewise.
(cbrt_test_data): Update call to AUTO_TESTS_f_f.
(ccos_test_data): Update call to AUTO_TESTS_c_c.
(ccosh_test_data): Likewise.
(cexp_test_data): Likewise.
(clog_test_data): Likewise.
(clog10_test_data): Likewise.
(cos_test_data): Update call to AUTO_TESTS_f_f.
(cos_test): Use ALL_RM_TEST.
(cos_tonearest_test_data): Remove.
(cos_test_tonearest): Likewise.
(cos_towardzero_test_data): Likewise.
(cos_test_towardzero): Likewise.
(cos_downward_test_data): Likewise.
(cos_test_downward): Likewise.
(cos_upward_test_data): Likewise.
(cos_test_upward): Likewise.
(cosh_test_data): Update call to AUTO_TESTS_f_f.
(cosh_test): Use ALL_RM_TEST.
(cosh_tonearest_test_data): Remove.
(cosh_test_tonearest): Likewise.
(cosh_towardzero_test_data): Likewise.
(cosh_test_towardzero): Likewise.
(cosh_downward_test_data): Likewise.
(cosh_test_downward): Likewise.
(cosh_upward_test_data): Likewise.
(cosh_test_upward): Likewise.
(cpow_test_data): Update call to AUTO_TESTS_cc_c.
(csqrt_test_data): Update call to AUTO_TESTS_c_c.
(ctan_test_data): Likewise.
(ctan_test): Use ALL_RM_TEST.
(ctan_tonearest_test_data): Remove.
(ctan_test_tonearest): Likewise.
(ctan_towardzero_test_data): Likewise.
(ctan_test_towardzero): Likewise.
(ctan_downward_test_data): Likewise.
(ctan_test_downward): Likewise.
(ctan_upward_test_data): Likewise.
(ctan_test_upward): Likewise.
(ctanh_test_data): Update call to AUTO_TESTS_c_c.
(ctanh_test): Use ALL_RM_TEST.
(ctanh_tonearest_test_data): Remove.
(ctanh_test_tonearest): Likewise.
(ctanh_towardzero_test_data): Likewise.
(ctanh_test_towardzero): Likewise.
(ctanh_downward_test_data): Likewise.
(ctanh_test_downward): Likewise.
(ctanh_upward_test_data): Likewise.
(ctanh_test_upward): Likewise.
(erf_test_data): Update call to AUTO_TESTS_f_f.
(erfc_test_data): Likewise.
(exp_test_data): Likewise.
(exp_test): Use ALL_RM_TEST.
(exp_tonearest_test_data): Remove.
(exp_test_tonearest): Likewise.
(exp_towardzero_test_data): Likewise.
(exp_test_towardzero): Likewise.
(exp_downward_test_data): Likewise.
(exp_test_downward): Likewise.
(exp_upward_test_data): Likewise.
(exp_test_upward): Likewise.
(exp10_test_data): Update call to AUTO_TESTS_f_f.
(exp10_test): Use ALL_RM_TEST.
(exp10_tonearest_test_data): Remove.
(exp10_test_tonearest): Likewise.
(exp10_towardzero_test_data): Likewise.
(exp10_test_towardzero): Likewise.
(exp10_downward_test_data): Likewise.
(exp10_test_downward): Likewise.
(exp10_upward_test_data): Likewise.
(exp10_test_upward): Likewise.
(exp2_test_data): Update call to AUTO_TESTS_f_f.
(expm1_test_data): Likewise.
(expm1_test): Use ALL_RM_TEST.
(expm1_tonearest_test_data): Remove.
(expm1_test_tonearest): Likewise.
(expm1_towardzero_test_data): Likewise.
(expm1_test_towardzero): Likewise.
(expm1_downward_test_data): Likewise.
(expm1_test_downward): Likewise.
(expm1_upward_test_data): Likewise.
(expm1_test_upward): Likewise.
(fma_test_data): Update call to AUTO_TESTS_fff_f.
(fma_test): Use ALL_RM_TEST.
(fma_towardzero_test_data): Remove.
(fma_test_towardzero): Likewise.
(fma_downward_test_data): Likewise.
(fma_test_downward): Likewise.
(fma_upward_test_data): Likewise.
(fma_test_upward): Likewise.
(hypot_test_data): Update call to AUTO_TESTS_ff_f.
(j0_test_data): Update call to AUTO_TESTS_f_f.
(j1_test_data): Likewise.
(jn_test_data): Update call to AUTO_TESTS_if_f.
(lgamma_test_data): Update call to AUTO_TESTS_f_f1.
(log_test_data): Update call to AUTO_TESTS_f_f.
(log10_test_data): Likewise.
(log1p_test_data): Likewise.
(log2_test_data): Likewise.
(pow_test_data): Update call to AUTO_TESTS_ff_f.
(pow_tonearest_test_data): Likewise.
(sin_test_data): Update call to AUTO_TESTS_f_f.
(sin_test): Use ALL_RM_TEST.
(sin_tonearest_test_data): Remove.
(sin_test_tonearest): Likewise.
(sin_towardzero_test_data): Likewise.
(sin_test_towardzero): Likewise.
(sin_downward_test_data): Likewise.
(sin_test_downward): Likewise.
(sin_upward_test_data): Likewise.
(sin_test_upward): Likewise.
(sincos_test_data): Update call to AUTO_TESTS_fFF_11.
(sinh_test_data): Update call to AUTO_TESTS_f_f.
(sinh_test): Use ALL_RM_TEST.
(sinh_tonearest_test_data): Remove.
(sinh_test_tonearest): Likewise.
(sinh_towardzero_test_data): Likewise.
(sinh_test_towardzero): Likewise.
(sinh_downward_test_data): Likewise.
(sinh_test_downward): Likewise.
(sinh_upward_test_data): Likewise.
(sinh_test_upward): Likewise.
(sqrt_test_data): Update call to AUTO_TESTS_f_f.
(sqrt_test): Use ALL_RM_TEST.
(sqrt_tonearest_test_data): Remove.
(sqrt_test_tonearest): Likewise.
(sqrt_towardzero_test_data): Likewise.
(sqrt_test_towardzero): Likewise.
(sqrt_downward_test_data): Likewise.
(sqrt_test_downward): Likewise.
(sqrt_upward_test_data): Likewise.
(sqrt_test_upward): Likewise.
(tan_test_data): Update call to AUTO_TESTS_f_f.
(tan_test): Use ALL_RM_TEST.
(tan_tonearest_test_data): Remove.
(tan_test_tonearest): Likewise.
(tan_towardzero_test_data): Likewise.
(tan_test_towardzero): Likewise.
(tan_downward_test_data): Likewise.
(tan_test_downward): Likewise.
(tan_upward_test_data): Likewise.
(tan_test_upward): Likewise.
(tanh_test_data): Update call to AUTO_TESTS_f_f.
(tgamma_test_data): Likewise.
(y0_test_data): Likewise.
(y1_test_data): Likewise.
(yn_test_data): Update call to AUTO_TESTS_if_f.
(main): Do not call removed functions.
|
|
Continuing the move to using ALL_RM_TEST for tests in libm-test.inc,
this patch converts the tests of fdim, ldexp and scalb. fdim and
scalb are cases where tests could depend on the rounding mode though
none of the present test inputs do; ldexp is such a case where the
function is equivalent to scalbn (for binary floating point) and the
tests used were a subset of those for scalbn, so this patch makes
ldexp testing use the scalbn tests, as done for other cases of libm
function aliases.
Tested x86_64 and x86.
* math/libm-test.inc (fdim_test): Use ALL_RM_TEST.
(ldexp_test_data): Remove.
(ldexp_test): Move to after scalbn_test. Use ALL_RM_TEST with
scalbn_test_data.
(scalb_test): Use ALL_RM_TEST.
|
|
arguments.
Continuing the move to systematically testing libm functions in all
rounding modes with ALL_RM_TEST, this patch converts the tests of
scalbn and scalbln to use that macro.
Those tests include cases of underflow and overflow, meaning the
expected results depend on the rounding mode. For convenience in
writing such tests manually, the patch adds the notation plus_oflow,
minus_oflow, plus_uflow and minus_uflow for overflowing / underflowing
results of each sign appropriate to the rounding mode being used, and
gen-libm-test.pl is made to substitute in the appropriate values. The
tests of underflow and overflow are extended to include negative
arguments to provide better coverage (otherwise minus_oflow and
minus_uflow wouldn't have been used at all).
(A subsequent patch will make ldexp use the scalbn tests, as those
functions are equivalent for binary floating point.)
Tested x86_64 and x86.
* math/gen-libm-test.pl (parse_args): Handle plus_oflow,
minus_oflow, plus_uflow and minus_uflow in expected results.
* math/libm-test.inc (scalbn_test_data): Add more tests of
negative arguments. Use plus_oflow, minus_oflow, plus_uflow and
minus_uflow.
(scalbn_test): Use ALL_RM_TEST.
(scalbln_test_data): Add more tests of negative arguments. Use
plus_oflow, minus_oflow, plus_uflow and minus_uflow.
(scalbln_test): Use ALL_RM_TEST.
|
|
This patch arranges for rint and nearbyint to be tested by
libm-test.inc with the same inputs (previously each had some test
inputs the other didn't, although there was a lot of overlap as well),
and for nearbyint to be tested in all rounding modes where previously
it was only tested in round-to-nearest mode. The expected results are
the same for each function, except that rint is expected to have
"inexact" exceptions for non-integer input and nearbyint is expected
not to have those exceptions.
Tested x86_64 and x86.
* math/libm-test.inc (nearbyint_test_data): Include all tests used
for rint. Include results for all rounding modes.
(nearbyint_test): Use ALL_RM_TEST.
(rint_test_data): Include all tests used for nearbyint.
|
|
This patch continues the libm-test move towards automatic testing of
all test inputs in all rounding modes by adding gen-libm-test.pl
support for tests specifying results in each rounding mode manually.
Previously a TEST_* line could specify arguments and results, or
arguments, results and flags. Now there is the option of (arguments,
results-rd, flags-rd, results-rn, flags-rn, results-rz, flags-rz,
results-ru, flags-ru). This is used to replace the separate arrays of
results in each rounding mode for lrint, llrint and rint. (In the
case of rint, some tests were only in rint_test_data and needed to
have expectations for non-default rounding modes added, which I did
manually. In various cases there were slight differences in things
such as the ordering of tests in the arrays for each mode.)
Tested x86_64 and x86.
* math/gen-libm-test.pl (parse_args): Handle results specified for
each rounding mode separately.
* math/libm-test.inc (lrint_test_data): Merge in per-rounding-mode
tests and results from lrint_tonearest_test_data,
lrint_towardzero_test_data, lrint_downward_test_data and
lrint_upward_test_data.
(lrint_test): Use ALL_RM_TEST.
(lrint_tonearest_test_data): Remove.
(lrint_test_tonearest): Likewise.
(lrint_towardzero_test_data): Likewise.
(lrint_test_towardzero): Likewise.
(lrint_downward_test_data): Likewise.
(lrint_test_downward): Likewise.
(lrint_upward_test_data): Likewise.
(lrint_test_upward): Likewise.
(llrint_test_data): Merge in per-rounding-mode tests and results
from llrint_tonearest_test_data, llrint_towardzero_test_data,
llrint_downward_test_data and llrint_upward_test_data.
(llrint_test): Use ALL_RM_TEST.
(llrint_tonearest_test_data): Remove.
(llrint_test_tonearest): Likewise.
(llrint_towardzero_test_data): Likewise.
(llrint_test_towardzero): Likewise.
(llrint_downward_test_data): Likewise.
(llrint_test_downward): Likewise.
(llrint_upward_test_data): Likewise.
(llrint_test_upward): Likewise.
(rint_test_data): Merge in per-rounding-mode tests and results
from rint_tonearest_test_data, rint_towardzero_test_data,
rint_downward_test_data and rint_upward_test_data. Add
per-rounding-mode results for tests not in those arrays.
(rint_test): Use ALL_RM_TEST.
(rint_tonearest_test_data): Remove.
(rint_test_tonearest): Likewise.
(rint_towardzero_test_data): Likewise.
(rint_test_towardzero): Likewise.
(rint_downward_test_data): Likewise.
(rint_test_downward): Likewise.
(rint_upward_test_data): Likewise.
(rint_test_upward): Likewise.
(main): Don't call removed functions.
|
|
The roundl assembly implementation
(sysdeps/powerpc/powerpc64/fpu/s_roundl.S)
returns wrong results for some inputs where first double is a exact
integer and the precision is determined by second long double.
Checking on implementation comments and history, I am very confident the
assembly implementation was based on a version before commit
5c68d401698a58cf7da150d9cce769fa6679ba5f that fixes BZ#2423 (Errors in
long double (ldbl-128ibm) rounding functions in glibc-2.4).
By just removing the implementation and make the build select
sysdeps/ieee754/ldbl-128ibm/s_roundl.c instead fixes the failing math.
This fixes 16707.
|
|
The nearbyintl assembly implementation
(sysdeps/powerpc/powerpc64/fpu/s_nearbyintl.S)
returns wrong results for some inputs where first double is a exact
integer and the precision is determined by second long double.
Checking on implementation comments and history, I am very confident the
assembly implementation was based on a version before commit
5c68d401698a58cf7da150d9cce769fa6679ba5f that fixes BZ#2423 (Errors in
long double (ldbl-128ibm) rounding functions in glibc-2.4).
By just removing the implementation and make the build select
sysdeps/ieee754/ldbl-128ibm/s_nearbyintl.c instead fixes the failing
math.
Fixes BZ#16706.
|
|
The ceill assembly implementation (sysdeps/powerpc/powerpc64/fpu/s_ceill.S)
returns wrong results for some inputs where first double is a exact
integer and the precision is determined by second long double.
Checking on implementation comments and history, I am very confident the
assembly implementation was based on a version before commit
5c68d401698a58cf7da150d9cce769fa6679ba5f that fixes BZ#2423 (Errors in
long double (ldbl-128ibm) rounding functions in glibc-2.4).
By just removing the implementation and make the build select
sysdeps/ieee754/ldbl-128ibm/s_ceill.c instead fixes the failing math.
Fixes BZ#16701.
|
|
|
|
ISO C requires the result of nextafter to be independent of the
rounding mode, even when underflow or overflow occurs. This patch
fixes the bug in various nextafter implementations that, having done
an overflowing computation to force an overflow exception (correct),
they then return the result of that computation rather than an
infinity computed some other way (incorrect, when the overflowing
result of arithmetic with that sign and rounding mode is finite but
the correct result is infinite) - generally by falling through to
existing code to return a value that in fact is correct for this case
(but was computed by an integer increment and so without generating
the exceptions required). Having fixed the bug, the previously
deferred conversion of nextafter testing in libm-test.inc to
ALL_RM_TEST is also included.
Tested x86_64 and x86; also spot-checked results of nextafter tests
for powerpc32 and mips64 to test the ldbl-128ibm and ldbl-128
changes. (The m68k change is untested.)
[BZ #16677]
* math/s_nextafter.c (__nextafter): Do not return value from
overflowing computation.
* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Likewise.
* sysdeps/ieee754/flt-32/s_nextafterf.c (__nextafterf): Likewise.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c (__nextafterl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c (__nextafterl):
Likewise.
* sysdeps/m68k/m680x0/fpu/s_nextafterl.c (__nextafterl): Likewise.
* math/libm-test.inc (nextafter_test): Use ALL_RM_TEST.
|
|
This patch adds support in libm-test.inc for automatically running
tests of a function in all rounding modes, in the form of a macro
ALL_RM_TEST to loop over all rounding modes when running tests of a
function, and uses it for functions whose results should always be
independent of the rounding mode.
Conversion of tests of nextafter to ALL_RM_TEST was deferred because
trying that conversion showed up bug 16677. (Finding such a bug of
course illustrates the point of testing more systematically in all
rounding modes rather than only reactively when bugs get reported in a
particular function in a non-default mode.) Conversion of tests where
results can depend on the rounding mode will follow once I add
gen-libm-test.pl support for using different initializers for the
expected results for different rounding modes (again, some conversions
may need deferring until bugs are fixed, depending on how
straightforward they are to XFAIL in a particular context).
Some existing tests get run five times rather than four, with
round-to-nearest tests both run in that as default rounding mode and
also with it explicitly set with fesetround (FE_TONEAREST). This
duplication doesn't seem particularly useful, so ALL_RM_TEST only runs
tests four times.
Tested x86_64 and x86.
* math/libm-test.inc (ALL_RM_TEST): New macro.
(ceil_test): Use ALL_RM_TEST.
(cimag_test): Likewise.
(conj_test): Likewise.
(copysign_test): Likewise.
(cproj_test): Likewise.
(creal_test): Likewise.
(fabs_test): Likewise.
(floor_test): Likewise.
(fmax_test): Likewise.
(fmin_test): Likewise.
(fmod_test): Likewise.
(fpclassify_test): Likewise.
(frexp_test): Likewise.
(ilogb_test): Likewise.
(isfinite_test): Likewise.
(finite_test): Likewise.
(isgreater_test): Likewise.
(isgreaterequal_test): Likewise.
(isinf_test): Likewise.
(isless_test): Likewise.
(islessequal_test): Likewise.
(islessgreater_test): Likewise.
(isnan_test): Likewise.
(isnormal_test): Likewise.
(issignaling_test): Likewise.
(isunordered_test): Likewise.
(logb_test): Likewise.
(logb_downward_test_data): Remove.
(logb_test_downward): Likewise.
(lround_test): Use ALL_RM_TEST.
(llround_test): Likewise.
(modf_test): Likewise.
(nexttoward_test): Likewise.
(remainder_test): Likewise.
(drem_test): Likewise.
(remainder_tonearest_test_data): Likewise.
(remainder_test_tonearest): Likewise.
(drem_test_tonearest): Likewise.
(remainder_towardzero_test_data): Likewise.
(remainder_test_towardzero): Likewise.
(drem_test_towardzero): Likewise.
(remainder_downward_test_data): Likewise.
(remainder_test_downward): Likewise.
(drem_test_downward): Likewise.
(remainder_upward_test_data): Likewise.
(remainder_test_upward): Likewise.
(drem_test_upward): Likewise.
(remquo_test): Use ALL_RM_TEST. Remove comment about x.
(round_test): Use ALL_RM_TEST.
(signbit_test): Likewise.
(trunc_test): Likewise.
(significand_test): Likewise.
(main): Don't call removed functions.
|
|
At present, libm-test.inc tests are run in multiple rounding modes by
having a separate array for each rounding mode (which might or might
not have the same test inputs as the other such arrays), a separate
function calling a RUN_TEST_LOOP_* macro over that array, and a
separate call to that function in main. The number of functions
tested in multiple rounding modes has gradually increased as
rounding-mode-specific bugs have been found and fixed in different
functions.
It would be better to be able to use a single macro call, in a single
function, to run tests for a function over all rounding modes, with
this being done for all libm functions except in cases where it's
deferred until some bugs can be fixed because XFAILing all affected
tests would be painful (that's why the full set of pow tests isn't
currently run in all rounding modes). This patch helps prepare for
that by making the structures storing expected results for tests store
results for all four rounding modes. After this patch, the results
for all modes are just duplicates, but tests access the appropriate
field in the structure, so helping to pave the way for when the fields
stop being duplicates and multiple rounding modes can be tested from a
single array. Tests might in future specify a single set of results,
to be used in all rounding modes; separate results for each rounding
mode, specified manually; or use of auto-libm-tests-* to generate
results for each rounding mode.
Tested x86_64.
* math/libm-test.inc (struct test_f_f_data): Move expected results
into structure for each rounding mode.
(struct test_ff_f_data): Likewise.
(struct test_ff_f_data_nexttoward): Likewise.
(struct test_fi_f_data): Likewise.
(struct test_fl_f_data): Likewise.
(struct test_if_f_data): Likewise.
(struct test_fff_f_data): Likewise.
(struct test_c_f_data): Likewise.
(struct test_f_f1_data): Likewise.
(struct test_fF_f1_data): Likewise.
(struct test_ffI_f1_data): Likewise.
(struct test_c_c_data): Likewise.
(struct test_cc_c_data): Likewise.
(struct test_f_i_data): Likewise.
(struct test_ff_i_data): Likewise.
(struct test_f_l_data): Likewise.
(struct test_f_L_data): Likewise.
(struct test_fFF_11_data): Likewise.
(RM_): New macro.
(RM_FE_DOWNWARD): Likewise.
(RM_FE_TONEAREST): Likewise.
(RM_FE_TOWARDZERO): Likewise.
(RM_FE_UPWARD): Likewise.
(RUN_TEST_LOOP_f_f): Update references to expected results.
(RUN_TEST_LOOP_2_f): Likewise.
(RUN_TEST_LOOP_fff_f): Likewise.
(RUN_TEST_LOOP_c_f): Likewise.
(RUN_TEST_LOOP_f_f1): Likewise.
(RUN_TEST_LOOP_fF_f1): Likewise.
(RUN_TEST_LOOP_fI_f1): Likewise.
(RUN_TEST_LOOP_ffI_f1): Likewise.
(RUN_TEST_LOOP_c_c): Likewise.
(RUN_TEST_LOOP_cc_c): Likewise.
(RUN_TEST_LOOP_f_i): Likewise.
(RUN_TEST_LOOP_f_i_tg): Likewise.
(RUN_TEST_LOOP_ff_i_tg): Likewise.
(RUN_TEST_LOOP_f_b): Likewise.
(RUN_TEST_LOOP_f_b_tg): Likewise.
(RUN_TEST_LOOP_f_l): Likewise.
(RUN_TEST_LOOP_f_L): Likewise.
(RUN_TEST_LOOP_fFF_11): Likewise.
* math/gen-libm-test.pl (parse_args): Output four copies of
expected results for each test.
|
|
This patch changes gen-auto-libm-tests so that, when generating test
results that depend on whether the architecture has before-rounding or
after-rounding tininess detection, the :before-rounding or
:after-rounding conditions go on the exception / errno flags
generated, rather than generating two separate lines in
auto-libm-test-out for e.g. flt-32:before-rounding and
flt-32:after-rounding.
The rationale for this is as follows. It would be desirable for
testing a libm function in all rounding modes to require just one
function and array in libm-test.inc, not four (or five), with the
array of test data including expected results for all rounding modes
rather than separate arrays for each rounding mode that also need to
repeat all the test inputs. For gen-libm-test.pl to generate data for
such an array from auto-libm-test-out, it would be helpful if each
(format, test input) pair has exactly four lines in
auto-libm-test-out, one for each rounding mode, rather than some
rounding modes having just one line and some having two because the
exceptions depend on tininess detection.
Tested x86_64 and x86.
* math/gen-auto-libm-tests.c: Update comment on output format.
(output_for_one_input_case): Generate before-rounding and
after-rounding information as conditions on output flags not
floating-point format.
* math/auto-libm-test-out: Regenerated.
* math/gen-libm-test.pl (cond_value): New function.
(or_cond_value): Use cond_value.
(generate_testfile): Handle conditional exceptions.
|
|
This patch makes libm-test.inc apply sanity checks to ulps values
resulting from tests, or found in libm-test-ulps files, to avoid the
need for manual checking/editing of new ulps for cases that are
excessively large or involve functions that should not have any ulps.
For IBM long double, errors must be at most 14ulp (the largest
currently checked-in value), or at most 3ulp (the documented error
bound for division) in the case of exactly-determined functions; for
other formats, the limits are 9ulp (also the largest currently
checked-in value) and 0ulp. Limits from ulps files are saturated to
those bounds, and regen-ulps will ignore any errors outside those
bounds. (Thus if, say, you have an architecture-specific problem with
fma, the tests can still be XFAILed in auto-libm-test-in, but errors
outside the permitted range can no longer be listed in
libm-test-ulps.)
Tested x86_64.
* math/libm-test.inc (max_valid_error): New variable.
(init_max_error): Take new argument specifying whether function
results are exactly determined. Set max_valid_error and bound
other variables for errors based on this argument.
(set_max_error): Do not record results above max_valid_error.
(check_float_internal): Only accept errors of up to 0.5ulps if
also at most max_valid_error.
(START): Take new argument EXACT and pass it to init_max_error.
(acos_test): Update call to START.
(acos_test_tonearest): Likewise.
(acos_test_towardzero): Likewise.
(acos_test_downward): Likewise.
(acos_test_upward): Likewise.
(acosh_test): Likewise.
(asin_test): Likewise.
(asin_test_tonearest): Likewise.
(asin_test_towardzero): Likewise.
(asin_test_downward): Likewise.
(asin_test_upward): Likewise.
(asinh_test): Likewise.
(atan_test): Likewise.
(atanh_test): Likewise.
(atan2_test): Likewise.
(cabs_test): Likewise.
(cacos_test): Likewise.
(cacosh_test): Likewise.
(carg_test): Likewise.
(casin_test): Likewise.
(casinh_test): Likewise.
(catan_test): Likewise.
(catanh_test): Likewise.
(cbrt_test): Likewise.
(ccos_test): Likewise.
(ccosh_test): Likewise.
(ceil_test): Likewise.
(cexp_test): Likewise.
(cimag_test): Likewise.
(clog_test): Likewise.
(clog10_test): Likewise.
(conj_test): Likewise.
(copysign_test): Likewise.
(cos_test): Likewise.
(cos_test_tonearest): Likewise.
(cos_test_towardzero): Likewise.
(cos_test_downward): Likewise.
(cos_test_upward): Likewise.
(cosh_test): Likewise.
(cosh_test_tonearest): Likewise.
(cosh_test_towardzero): Likewise.
(cosh_test_downward): Likewise.
(cosh_test_upward): Likewise.
(cpow_test): Likewise.
(cproj_test): Likewise.
(creal_test): Likewise.
(csin_test): Likewise.
(csinh_test): Likewise.
(csqrt_test): Likewise.
(ctan_test): Likewise.
(ctan_test_tonearest): Likewise.
(ctan_test_towardzero): Likewise.
(ctan_test_downward): Likewise.
(ctan_test_upward): Likewise.
(ctanh_test): Likewise.
(ctanh_test_tonearest): Likewise.
(ctanh_test_towardzero): Likewise.
(ctanh_test_downward): Likewise.
(ctanh_test_upward): Likewise.
(erf_test): Likewise.
(erfc_test): Likewise.
(exp_test): Likewise.
(exp_test_tonearest): Likewise.
(exp_test_towardzero): Likewise.
(exp_test_downward): Likewise.
(exp_test_upward): Likewise.
(exp10_test): Likewise.
(exp10_test_tonearest): Likewise.
(exp10_test_towardzero): Likewise.
(exp10_test_downward): Likewise.
(exp10_test_upward): Likewise.
(pow10_test): Likewise.
(exp2_test): Likewise.
(expm1_test): Likewise.
(expm1_test_tonearest): Likewise.
(expm1_test_towardzero): Likewise.
(expm1_test_downward): Likewise.
(expm1_test_upward): Likewise.
(fabs_test): Likewise.
(fdim_test): Likewise.
(floor_test): Likewise.
(fma_test): Likewise.
(fma_test_towardzero): Likewise.
(fma_test_downward): Likewise.
(fma_test_upward): Likewise.
(fmax_test): Likewise.
(fmin_test): Likewise.
(fmod_test): Likewise.
(fpclassify_test): Likewise.
(frexp_test): Likewise.
(hypot_test): Likewise.
(ilogb_test): Likewise.
(isfinite_test): Likewise.
(finite_test): Likewise.
(isgreater_test): Likewise.
(isgreaterequal_test): Likewise.
(isinf_test): Likewise.
(isless_test): Likewise.
(islessequal_test): Likewise.
(islessgreater_test): Likewise.
(isnan_test): Likewise.
(isnormal_test): Likewise.
(issignaling_test): Likewise.
(isunordered_test): Likewise.
(j0_test): Likewise.
(j1_test): Likewise.
(jn_test): Likewise.
(ldexp_test): Likewise.
(lgamma_test): Likewise.
(gamma_test): Likewise.
(lrint_test): Likewise.
(lrint_test_tonearest): Likewise.
(lrint_test_towardzero): Likewise.
(lrint_test_downward): Likewise.
(lrint_test_upward): Likewise.
(llrint_test): Likewise.
(llrint_test_tonearest): Likewise.
(llrint_test_towardzero): Likewise.
(llrint_test_downward): Likewise.
(llrint_test_upward): Likewise.
(log_test): Likewise.
(log10_test): Likewise.
(log1p_test): Likewise.
(log2_test): Likewise.
(logb_test): Likewise.
(logb_test_downward): Likewise.
(lround_test): Likewise.
(llround_test): Likewise.
(modf_test): Likewise.
(nearbyint_test): Likewise.
(nextafter_test): Likewise.
(nexttoward_test): Likewise.
(pow_test): Likewise.
(pow_test_tonearest): Likewise.
(pow_test_towardzero): Likewise.
(pow_test_downward): Likewise.
(pow_test_upward): Likewise.
(remainder_test): Likewise.
(drem_test): Likewise.
(remainder_test_tonearest): Likewise.
(drem_test_tonearest): Likewise.
(remainder_test_towardzero): Likewise.
(drem_test_towardzero): Likewise.
(remainder_test_downward): Likewise.
(drem_test_downward): Likewise.
(remainder_test_upward): Likewise.
(drem_test_upward): Likewise.
(remquo_test): Likewise.
(rint_test): Likewise.
(rint_test_tonearest): Likewise.
(rint_test_towardzero): Likewise.
(rint_test_downward): Likewise.
(rint_test_upward): Likewise.
(round_test): Likewise.
(scalb_test): Likewise.
(scalbn_test): Likewise.
(scalbln_test): Likewise.
(signbit_test): Likewise.
(sin_test): Likewise.
(sin_test_tonearest): Likewise.
(sin_test_towardzero): Likewise.
(sin_test_downward): Likewise.
(sin_test_upward): Likewise.
(sincos_test): Likewise.
(sinh_test): Likewise.
(sinh_test_tonearest): Likewise.
(sinh_test_towardzero): Likewise.
(sinh_test_downward): Likewise.
(sinh_test_upward): Likewise.
(sqrt_test): Likewise.
(sqrt_test_tonearest): Likewise.
(sqrt_test_towardzero): Likewise.
(sqrt_test_downward): Likewise.
(sqrt_test_upward): Likewise.
(tan_test): Likewise.
(tan_test_tonearest): Likewise.
(tan_test_towardzero): Likewise.
(tan_test_downward): Likewise.
(tan_test_upward): Likewise.
(tanh_test): Likewise.
(tgamma_test): Likewise.
(trunc_test): Likewise.
(y0_test): Likewise.
(y1_test): Likewise.
(yn_test): Likewise.
(significand_test): Likewise.
|
|
As recently discussed
<https://sourceware.org/ml/libc-alpha/2014-02/msg00670.html>, it
doesn't seem particularly useful for libm-test-ulps files to contain
huge amounts of data on ulps for individual tests; just the global
maximum observed ulps for each function, together with the
verification of exceptions, errno and special results such as
infinities and NaNs for each test, suffices to verify that a
function's behavior on the given test inputs is within the expected
accuracy. Removing this data reduces source tree churn caused by
updates to these files when libm tests are added, and reduces the
frequency with which testsuite additions actually need libm-test-ulps
changes at all.
Accordingly, this patch removes that data, so that individual tests
get checked against the global bounds for the given function and only
generate an error if those are exceeded. Tested x86_64 (including
verifying that if an ulps value is artificially reduced, the tests do
indeed fail as they should and "make regen-ulps" generates the
expected changes).
* math/libm-test.inc (struct ulp_data): Don't refer to ulps for
individual tests in comment.
(libm-test-ulps.h): Don't refer to test_ulps in #include comment.
(prev_max_error): New variable.
(prev_real_max_error): Likewise.
(prev_imag_max_error): Likewise.
(compare_ulp_data): Don't refer to test names in comment.
(find_test_ulps): Remove function.
(find_function_ulps): Likewise.
(find_complex_function_ulps): Likewise.
(init_max_error): Take function name as argument. Look up ulps
for that function.
(print_ulps): Remove function.
(print_max_error): Use prev_max_error instead of calling
find_function_ulps.
(print_complex_max_error): Use prev_real_max_error and
prev_imag_max_error instead of calling find_complex_function_ulps.
(check_float_internal): Take max_ulp parameter instead of calling
find_test_ulps. Don't call print_ulps.
(check_float): Update call to check_float_internal.
(check_complex): Update calls to check_float_internal.
(START): Pass argument to init_max_error.
* math/gen-libm-test.pl (%results): Don't include "kind"
information.
(parse_ulps): Don't handle ulps of individual tests.
(print_ulps_file): Likewise.
(output_ulps): Likewise.
* math/README.libm-test: Update.
* manual/libm-err-tab.pl (parse_ulps): Don't handle ulps of
individual tests.
* sysdeps/aarch64/libm-test-ulps: Remove individual test ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/ia64/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/coldfire/fpu/libm-test-ulps: Likewise.
* sysdeps/m68k/m680x0/fpu/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Remove individual test ulps.
|
|
When regenerating ulps incrementally with "make regen-ulps", the
resulting diffs should only increase existing ulps, never decrease
them. This allows successive uses of "make regen-ulps" on different
hardware or with different compiler configurations to accumulate ulps
that are sufficient for tests to pass in a variety of configurations.
However, sometimes changes that decrease ulps are wrongly generated;
thus, when applying
<https://sourceware.org/ml/libc-alpha/2014-02/msg00605.html> I had to
remove such changes manually. The problem is
print_complex_max_error. If the ulps for either the real or the
imaginary part of a function are out of range, this function prints
the maximum ulps seen for both parts, which then replace those
previously in libm-test-ulps. So if the ulps for one part are bigger
than recorded before, but those for the other part are smaller, the
diffs reduce existing ulps.
This patch fixes the logic so that only increased ulps get printed.
Tested x86_64 ("make math/tests", and "make regen-ulps" in a situation
with ulps manually modified so one part would go up and the other
down, to confirm the changes have the intended effect then).
* math/libm-test.inc (print_complex_max_error): Check separately
whether real and imaginary errors are within allowed range and
pass 0 to print_complex_function_ulps instead of value within
allowed range.
|
|
In 84ba214c, I removed some redundant sign computations and in the
process, I incorrectly got rid of a temporary variable, thus passing
the absolute value of the input to bsloww1. This caused #16623.
This fix undoes the incorrect change.
|
|
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I
noted it was necessary to add includes of Makeconfig early in various
subdirectory makefiles for the tests-special variable settings added
by that patch to be conditional on configuration information. No-one
commented on the general question there of whether Makeconfig should
always be included immediately after the definition of subdir.
This patch implements that early inclusion of Makeconfig in each
directory (which is a lot easier than consistent placement of includes
of Rules). Includes are added if needed, or moved up if already
present. Subdirectory "all:" targets are removed, since Makeconfig
provides one.
There is potential for further cleanups I haven't done. Rules and
Makerules have code such as
ifneq "$(findstring env,$(origin headers))" ""
headers :=
endif
to override to empty any value of various variables that came from the
environment. I think there is a case for Makeconfig setting all the
subdirectory variables (other than subdir) to empty to ensure no
outside value is going to take effect if a subdirectory fails to
define a variable. (A list of such variables, possibly out of date
and incomplete, is in manual/maint.texi.) Rules and Makerules would
give errors if Makeconfig hadn't already been included, instead of
including it themselves. The special code to override values coming
from the environment would then be obsolete and could be removed.
Tested x86_64, including that installed binaries are identical before
and after the patch.
* argp/Makefile: Include Makeconfig immediately after defining
subdir.
* assert/Makefile: Likewise.
* benchtests/Makefile: Likewise.
* catgets/Makefile: Likewise.
* conform/Makefile: Likewise.
* crypt/Makefile: Likewise.
* csu/Makefile: Likewise.
(all): Remove target.
* ctype/Makefile: Include Makeconfig immediately after defining
subdir.
* debug/Makefile: Likewise.
* dirent/Makefile: Likewise.
* dlfcn/Makefile: Likewise.
* gmon/Makefile: Likewise.
* gnulib/Makefile: Likewise.
* grp/Makefile: Likewise.
* gshadow/Makefile: Likewise.
* hesiod/Makefile: Likewise.
* hurd/Makefile: Likewise.
(all): Remove target.
* iconvdata/Makefile: Include Makeconfig immediately after
defining subdir.
* inet/Makefile: Likewise.
* intl/Makefile: Likewise.
* io/Makefile: Likewise.
* libio/Makefile: Likewise.
(all): Remove target.
* locale/Makefile: Include Makeconfig immediately after defining
subdir.
* login/Makefile: Likewise.
* mach/Makefile: Likewise.
(all): Remove target.
* malloc/Makefile: Include Makeconfig immediately after defining
subdir.
(all): Remove target.
* manual/Makefile: Include Makeconfig immediately after defining
subdir.
* math/Makefile: Likewise.
* misc/Makefile: Likewise.
* nis/Makefile: Likewise.
* nss/Makefile: Likewise.
* po/Makefile: Likewise.
(all): Remove target.
* posix/Makefile: Include Makeconfig immediately after defining
subdir.
* pwd/Makefile: Likewise.
* resolv/Makefile: Likewise.
* resource/Makefile: Likewise.
* rt/Makefile: Likewise.
* setjmp/Makefile: Likewise.
* shadow/Makefile: Likewise.
* signal/Makefile: Likewise.
* socket/Makefile: Likewise.
* soft-fp/Makefile: Likewise.
* stdio-common/Makefile: Likewise.
* stdlib/Makefile: Likewise.
* streams/Makefile: Likewise.
* string/Makefile: Likewise.
* sunrpc/Makefile: Likewise.
(all): Remove target.
* sysvipc/Makefile: Include Makeconfig immediately after defining
subdir.
* termios/Makefile: Likewise.
* time/Makefile: Likewise.
* timezone/Makefile: Likewise.
(all): Remove target.
* wcsmbs/Makefile: Include Makeconfig immediately after defining
subdir.
* wctype/Makefile: Likewise.
libidn/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
localedata/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
(all): Remove target.
nptl/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
nptl_db/ChangeLog:
* Makefile: Include Makeconfig immediately after defining subdir.
|
|
This patch completes the headers cleanup consequent on removal of
_BSD_SOURCE and _SVID_SOURCE (apart from any subsequent deprecations):
* #endif conditionals that referred to BSD or SVID are updated.
* Redundant __USE_* tests in cases involving __USE_MISC are removed.
This includes cases such as __USE_MISC || __USE_ISOC99, where
__USE_MISC is redundant (because __USE_MISC is only ever defined in
the default / _DEFAULT_SOURCE / _GNU_SOURCE case, when __USE_ISOC99
is also defined; the same applies to the non-XSI-extended POSIX
versions), and cases involving __USE_GNU, where __USE_GNU is
redundant (because if __USE_GNU is defined, so are the other __USE_*
macros). There may well be other cases of __USE_FOO || __USE_BAR
tests that could be simplified because one macro implies the other;
this patch only addresses cases involving __USE_MISC.
Tested x86_64.
* bits/fcntl.h [__USE_MISC]: Remove redundant conditionals.
* bits/sigaction.h [__USE_MISC]: Likewise.
* bits/waitstatus.h: Update #endif comments.
* ctype/ctype.h: Likewise.
* dirent/dirent.h: Likewise.
[__USE_MISC]: Remove redundant conditionals.
* grp/grp.h: Update #endif comments.
[__USE_GNU]: Remove redundant conditionals.
[__USE_MISC]: Likewise.
* inet/netinet/in.h [__USE_GNU]: Likewise.
* io/sys/stat.h [__USE_MISC]: Likewise.
* libio/bits/stdio-ldbl.h [__USE_MISC]: Likewise.
* libio/bits/stdio.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* libio/bits/stdio2.h [__USE_MISC]: Likewise.
* libio/stdio.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* math/bits/math-finite.h [__USE_MISC]: Likewise.
* math/bits/mathcalls.h [__USE_MISC]: Likewise.
* math/math.h: Update #else and #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* misc/sys/uio.h: Update #endif comments.
* posix/bits/unistd.h [__USE_MISC]: Remove redundant conditionals.
* posix/glob.h [__USE_MISC]: Likewise.
* posix/sys/types.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* posix/sys/wait.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* posix/unistd.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* pwd/pwd.h [__USE_GNU]: Likewise.
[__USE_MISC]: Likewise.
* resolv/netdb.h [__USE_GNU]: Likewise.
* signal/signal.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* stdlib/stdlib.h: Update #else and #endif comments.
[__USE_MISC]: Remove redundant conditionals.
[__USE_GNU]: Likewise.
* string/bits/string2.h [__USE_MISC]: Likewise.
* string/string.h: Update #endif comments.
[__USE_MISC]: Remove redundant conditionals.
* sysdeps/m68k/m680x0/fpu/bits/mathinline.h [__USE_MISC]:
Likewise.
* sysdeps/mach/hurd/bits/fcntl.h [__USE_MISC]: Likewise.
* sysdeps/mach/hurd/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/stat.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h: Update #endif
comments.
[__USE_MISC]: Remove redundant conditionals.
* sysdeps/unix/sysv/linux/bits/in.h [__USE_GNU]: Likewise.
* sysdeps/unix/sysv/linux/bits/sigaction.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/bits/socket.h [__USE_GNU]: Likewise.
* sysdeps/unix/sysv/linux/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/ia64/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/m68k/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/mips/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/stat.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/s390/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/s390/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/sigaction.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/stat.h [__USE_MISC]:
Likewise.
* sysdeps/unix/sysv/linux/x86/bits/stat.h [__USE_MISC]: Likewise.
* sysdeps/x86/bits/string.h: Update #endif comments.
* sysdeps/x86/fpu/bits/mathinline.h [__USE_MISC]: Remove redundant
conditionals.
* time/sys/time.h: Update #endif comments.
* time/time.h: Likewise.
[__USE_MISC]: Remove redundant conditionals.
|
|
This patch moves tests of clog10 to auto-libm-test-in. Note that this
means gen-auto-libm-tests will now depend on the recent MPC 1.0.2
release which added a fix for a bug that made gen-auto-libm-tests hang
for clog10. (It still can't conveniently be used for cacos cacosh
casin casinh catan catanh csin csinh because of extreme slowness of
those functions for special cases in MPC; at least some slow cases of
csin / csinh are fixed in MPC trunk, but not in a release.)
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of clog10.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (clog10_test_data): Use AUTO_TESTS_c_c.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch moves tests of fma to auto-libm-test-in, adding the
required support to gen-auto-libm-tests.
Because fma can have exact zero results depending on the rounding
mode, results of fma cannot always be determined from a single value
computed in higher precision with a sticky bit. Thus, this patch adds
support for recomputing results with the original MPFR/MPC function in
the case where an exact zero is involved. (This also affects some
results for cpow; when we start testing cpow in all rounding modes, I
think it will be most appropriate to make those tests use
IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs
of zero results, or special caes in general, for cpow, and I think
signs of zero for cpow are beyond the scope of glibc's accuracy
goals.)
Simply treating the existing test inputs for fma like those for other
functions (i.e., as representing the given value rounded up or down to
any of the supported floating-point formats) increases the size of
auto-libm-test-out by about 16MB (i.e., about half the file is fma
test data). While rounded versions of tests are perfectly reasonable
test inputs for fma, in this case having them seems excessive, so this
patch allows functions to specify in gen-auto-libm-tests that the
given test inputs are only to be interpreted exactly, not as
corresponding to values rounded up and down. This reduces the size of
the generated test data for fma to a more reasonable 2MB.
A consequence of this patch is that fma is now tested for correct
presence or absence of "inexact" exceptions, where previously this
wasn't tested because I didn't want to try to add that test coverage
manually to all the existing tests. As far as I know, the existing
fma implementations are already correct in this regard.
This patch provides the first cases where the gen-auto-libm-tests
support for distinguishing before-rounding/after-rounding underflow
actually produces separate entries in auto-libm-test-out (for
functions without exactly determined results, the affected cases are
all considered underflow-optional, so this only affects functions like
fma with exactly determined results). I didn't see any signs of
problems with this logic in the output.
Tested x86_64 and x86.
* math/auto-libm-test-in: Add tests of fma.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f.
(fma_towardzero_test_data): Likewise.
(fma_downward_test_data): Likewise.
(fma_upward_test_data): Likewise.
* math/gen-auto-libm-tests.c (rounding_mode_desc): Add field
mpc_mode.
(rounding_modes): Add values for new field.
(func_calc_method): Add value mpfr_fff_f.
(func_calc_desc): Add mpfr_fff_f union field.
(test_function): Add field exact_args.
(FUNC): Add macro argument EXACT_ARGS.
(FUNC_mpfr_f_f): Update call to FUNC.
(FUNC_mpfr_f_f): Likewise.
(FUNC_mpfr_ff_f): Likewise.
(FUNC_mpfr_if_f): Likewise.
(FUNC_mpc_c_f): Likewise.
(FUNC_mpc_c_c): Likewise.
(test_functions): Add fma. Update calls to FUNC.
(handle_input_arg): Add argument exact_args.
(add_test): Update call to handle_input_arg.
(calc_generic_results): Add argument mode. Handle mpfr_fff_f.
(output_for_one_input_case): Update call to calc_generic_results.
Recalculate exact zero results in each rounding mode.
|
|
gen-auto-libm-tests has a bug in the logic for setting a sticky bit
based on the ternary value from MPFR: it is correct for positive
results, but for negative results mpz_setbit acts as if a two's
complement representation is used, whereas the low bit needs setting
based on the sign-magnitude representation GMP actually uses. (This
showed up in converting fma tests to use auto-libm-test-in /
gen-auto-libm-tests.)
This patch fixes the problem by negating the mpz_t value to set its
low bit. There are lots of changes to auto-libm-test-out (mainly 1ulp
fixes to ldbl-128 expected results), but only a few ulps updates are
needed on x86 / x86_64. In one case, a corrected expectation showed
up a spurious underflow exception where the correct result is slightly
outside the underflowing range.
Tested x86_64 and x86 and ulps updated accordingly.
* math/gen-auto-libm-tests.c (adjust_real): Ensure integers are
non-negative before setting low bit.
* math/auto-libm-test-in: Mark one asin test possibly having
spurious underflow.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch cleans up following the obsoletion of _BSD_SOURCE and
_SVID_SOURCE by combining __USE_BSD and __USE_SVID into __USE_MISC.
The only non-mechanical part of this patch is the changes to
features.h; everything else is simple substitution of __USE_MISC for
the old macros. Thus, this patch leaves obviously redundant
conditionals such as "defined __USE_MISC || defined __USE_MISC", and
does not update #endif comments where they referred to BSD or SVID in
words instead of the literal macro name. This is intended to
facilitate patch review by separating the less mechanical changes from
these purely mechanical changes into a separate patch. (I do intend
to integrate all the changes from
<https://sourceware.org/ml/libc-alpha/2013-12/msg00226.html>, which I
believe includes all the trailing comment updates, in subsequent
patches.)
Tested x86_64.
* include/features.h (__USE_BSD): Remove macro definitions.
(__USE_SVID): Likewise.
(_BSD_SOURCE): Likewise.
(_SVID_SOURCE): Likewise.
[!defined _BSD_SOURCE && !defined _SVID_SOURCE]: Remove condition
from definition of _DEFAULT_SOURCE.
[_BSD_SOURCE || _SVID_SOURCE]: Change condition to
[_DEFAULT_SOURCE].
* bits/fcntl.h [__USE_BSD]: Change condition to [__USE_MISC].
* bits/mman.h [__USE_BSD]: Likewise.
* bits/termios.h [__USE_BSD]: Likewise.
* bits/waitstatus.h [__USE_BSD]: Likewise.
* ctype/ctype.h [__USE_SVID]: Likewise.
* dirent/dirent.h [__USE_BSD]: Likewise.
* grp/grp.h [__USE_SVID]: Likewise.
[__USE_BSD]: Likewise.
* inet/netinet/igmp.h [__USE_BSD]: Likewise.
* io/fcntl.h [__USE_BSD]: Likewise.
* io/ftw.h [__USE_BSD]: Likewise.
* io/sys/stat.h [__USE_BSD]: Likewise.
* libio/bits/stdio-ldbl.h [__USE_BSD]: Likewise.
* libio/bits/stdio2.h [__USE_BSD]: Likewise.
* libio/stdio.h [__USE_SVID]: Likewise.
[__USE_BSD]: Likewise.
* math/math.h [__USE_SVID]: Likewise.
[__USE_BSD]: Likewise.
* misc/bits/syslog-ldbl.h [__USE_BSD]: Likewise.
* misc/bits/syslog.h [__USE_BSD]: Likewise.
* misc/search.h [__USE_SVID]: Likewise.
* misc/sys/mman.h [__USE_BSD]: Likewise.
* misc/sys/syslog.h [__USE_BSD]: Likewise.
* misc/sys/uio.h [__USE_BSD]: Likewise.
* posix/bits/unistd.h [__USE_BSD]: Likewise.
* posix/glob.h [__USE_BSD]: Likewise.
* posix/regex.h [__USE_BSD]: Likewise.
* posix/sys/types.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* posix/sys/utsname.h [__USE_SVID]: Likewise.
* posix/sys/wait.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* posix/unistd.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* pwd/pwd.h [__USE_SVID]: Likewise.
* resolv/netdb.h [__USE_BSD]: Likewise.
* setjmp/setjmp.h [__USE_BSD]: Likewise.
* signal/signal.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* socket/sys/socket.h [__USE_BSD]: Likewise.
* stdlib/fmtmsg.h [__USE_SVID]: Likewise.
* stdlib/stdlib.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* string/bits/string2.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* string/bits/string3.h [__USE_BSD]: Likewise.
* string/endian.h [__USE_BSD]: Likewise.
* string/string.h [__USE_SVID]: Likewise.
[__USE_BSD]: Likewise.
* string/strings.h [__USE_BSD]: Likewise.
* sysdeps/generic/netinet/ip.h [__USE_BSD]: Likewise.
* sysdeps/gnu/netinet/ip_icmp.h [__USE_BSD]: Likewise.
* sysdeps/mach/hurd/bits/fcntl.h [__USE_BSD]: Likewise.
* sysdeps/mach/hurd/bits/stat.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/mman.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/alpha/bits/termios.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/bits/mman-linux.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/bits/sys_errlist.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/bits/termios.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/mips/bits/termios.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/netinet/if_ether.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/netinet/if_fddi.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/netinet/if_tr.h [__USE_BSD]: Likewise.
* sysdeps/unix/sysv/linux/powerpc/bits/termios.h [__USE_BSD]:
Likewise.
* sysdeps/unix/sysv/linux/sparc/bits/termios.h [__USE_BSD]:
Likewise.
* sysdeps/x86/bits/string.h [__USE_BSD]: Likewise.
* sysvipc/sys/ipc.h [__USE_SVID]: Likewise.
* termios/termios.h [__USE_BSD]: Likewise.
* time/sys/time.h [__USE_BSD]: Likewise.
* time/time.h [__USE_BSD]: Likewise.
[__USE_SVID]: Likewise.
* sysdeps/unix/sysv/linux/hppa/bits/mman.h [__USE_BSD]: Change
condition to [__USE_MISC].
|
|
This is a minimal patch to remove _BSD_SOURCE and _SVID_SOURCE from
the documented user API, making them into aliases for _DEFAULT_SOURCE
with a #warning given, but keeping most of the features.h logic using
those macros and all the exising __USE_* conditionals, on the basis
that all the consequent cleanups will go in followup patches.
Tested x86_64.
* include/features.h: Update comment documenting feature test
macros.
[_BSD_SOURCE || _SVID_SOURCE]: Give #warning. Define
_DEFAULT_SOURCE.
* manual/creature.texi (_BSD_SOURCE): Remove documentation.
(_SVID_SOURCE): Likewise.
(_DEFAULT_SOURCE): Update description of default features.
(Feature Test Macros): Don't mention _SVID_SOURCE in conjunction
with _GNU_SOURCE.
* manual/filesys.texi (__ftw_func_t): Do not refer to _BSD_SOURCE.
(S_ISVTX): Likewise.
* manual/math.texi (Mathematical Constants): Likewise.
* manual/signal.texi (Interrupted Primitives): Likewise.
* manual/startup.texi (putenv): Do not refer to _SVID_SOURCE.
* math/test-matherr.c (_SVID_SOURCE): Do not define.
* sysvipc/sys/ipc.h [__USE_SVID && !__USE_XOPEN && __GNUC__ >= 2]:
Don't refer to _SVID_SOURCE in warning text.
|
|
Extend the range of numbers handled via unsafe mode.
Add expl testcase and regenerate ULPs for s390.
|
|
|
|
|
|
ARM has an override of the test math/test-fpucw.c, to disable (for
soft-float testing) definitions of hard-float macros in fpu_control.h
that the header normally defines not only when building for
hard-float, but also when building for soft-float with _LIBC defined
so that libc code can dynamically test whether VFP hardware is
present. (_LIBC is defined when building tests, although ideally it
wouldn't be.)
The override doesn't work for the derived tests test-fpucw-*.c because
they use #include "" instead of <> to include test-fpucw.c, so always
get the math/ version instead of the ARM sysdeps override. This patch
changes them to use <> so the sysdeps override is effective.
(test-fpucw-ieee-static.c doesn't need a change because it includes
test-fpucw-ieee.c, which isn't itself being overridden, which in turn
includes test-fpucw.c with a #include changed by this patch.)
Tested for ARM (big-endian soft-float, non-VFP hardware).
* math/test-fpucw-ieee.c: Use <> in #include of test-fpucw.c.
* math/test-fpucw-static.c: Likewise.
|
|
This patch marks more libm tests as expected to fail for ldbl-128ibm
in non-default rounding modes. Given this, my expm1l fix
<https://sourceware.org/ml/libc-alpha/2014-01/msg00135.html> and my
libgcc fix <http://gcc.gnu.org/ml/gcc-patches/2014-01/msg00157.html>
for spurious overflows, the remaining failures in test-ldouble.out
(for powerpc32 hard float) are small ulps, spurious underflow and
inexact exceptions (the former probably arising from libgcc bugs
though I haven't checked each case; the latter are barely meaningful
for this format anyway when basic arithmetic isn't correctly rounding,
though most of them are probably GCC bug 59412 which doesn't actually
involve long double), missing underflow exceptions from clog, ctan and
ctanh (probably one of the known bugs for another function), and logb
in round-downward mode (bug 887, though it's really a GCC bug that
we're not currently working around).
Tested for powerpc32 hard float.
* math/auto-libm-test-in: Mark various tests with
xfail-rounding:ldbl-128ibm.
* math/auto-libm-test-out: Regenerated.
|
|
This patch marks various libm tests with xfail-rounding:ldbl-128ibm,
where the failures appear to relate to GCC bug 59666 (bad libgcc
handling of directed rounding), so as to allow clean libm-test-ulps
regeneration without needing to edit out large ulps for various
functions manually.
Note that this only deals with the cases problematic for ulps
regeneration. There are plenty of test failures left that do not
affect ulps regeneration - results that are infinities or NaNs but
should be finite, or vice versa, and missing and spurious exceptions -
which should also be resolved during the release testing period.
Tested for powerpc32 (hard float).
* math/auto-libm-test-in: Mark various tests with
xfail-rounding:ldbl-128ibm.
* math/auto-libm-test-out: Regenerated.
|
|
|
|
16356).
This patch fixes bug 16356, bad results from x86 / x86_64 expl /
exp10l in directed rounding modes, the most serious of the bugs shown
up by my patch expanding libm test coverage. When I fixed bug 16293,
I thought it was only necessary to set round-to-nearest when using
frndint in expm1 functions, because in other cases the cancellation
error from having the resulting fractional part close to 1 or -1 would
not be significant. However, in expl and exp10l, the way the final
fractional part gets computed (something more complicated than a
simple subtraction, because more precision is needed than you'd get
that way) can result in a value outside the range [-1, 1] when the
argument to frndint was very close to an integer and was rounded the
"wrong" way because of the rounding mode - and the f2xm1 instruction
has undefined results if its argument is outside [-1, 1], so resulting
in the large errors seen. So this patch removes the USE_AS_EXPM1L
conditionals on the round-to-nearest settings, so all of expl, expm1l
and exp10l now get round-to-nearest used for frndint (meaning the
final fractional part can at most be slightly above 0.5 in
magnitude). Associated tests of exp and exp10 are added and testing
of exp10 in directed rounding modes enabled.
Tested x86_64 and x86 and ulps updated accordingly.
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL): Also set
round-to-nearest for [!USE_AS_EXPM1L].
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL): Likewise.
* math/auto-libm-test-in: Do not expect cosh tests to fail. Add
more tests of exp and exp10. Expect some exp10 tests to miss
exceptions or fail in directed rounding modes.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (exp10_tonearest_test_data): New array.
(exp10_test_tonearest): New function.
(exp10_towardzero_test_data): New array.
(exp10_test_towardzero): New function.
(exp10_downward_test_data): New array.
(exp10_test_downward): New function.
(exp10_upward_test_data): New array.
(exp10_test_upward): New function.
(main): Call the new functions.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
Various libm functions have inadequate test coverage in libm-test.inc
/ auto-libm-test-in - failing to cover all the usual special cases
(infinities, NaNs, zero, large and small finite values, subnormals) as
well as a reasonable range of ordinary inputs and, where appropriate,
inputs close to the thresholds for underflow and overflow.
This patch improves test coverage for real functions [a-c]* (with the
expectation of adding more coverage for other functions later).
Tested x86_64 and x86 and ulps updated accordingly (and eight glibc
bugs and one C11 DR filed for issues found in the process).
* math/auto-libm-test-in: Add more tests of acos, acosh, asin,
asinh, atan, atan2, atanh, cbrt, cos and cosh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (acosh_test_data): Add more tests.
(atanh_test_data): Likewise.
(ceil_test_data): Likewise.
(copysign_test_data): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch moves tests of cpow to auto-libm-test-in, adding the
required support to gen-auto-libm-tests.
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of cpow.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (cpow_test_data): Use AUTO_TESTS_cc_c.
* * math/gen-auto-libm-tests.c (func_calc_method): Add value
mpc_cc_c.
(func_calc_desc): Add mpc_cc_c union field.
(test_functions): Add cpow.
(special_fill_2pi): New function.
(special_real_inputs): Add 2pi.
(calc_generic_results): Handle mpc_cc_c.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch moves tests of ccos, ccosh, cexp, clog, csqrt, ctan and
ctanh to auto-libm-test-in, adding the required support to
gen-auto-libm-tests. Other TEST_c_c functions aren't moved for now
(although the relevant table entries are put in gen-auto-libm-tests
for it to know how to handle them): clog10 because of a known MPC bug
causing it to hang for at least some pure imaginary inputs (fixed in
SVN, but I'd rather not rely on unreleased versions of MPFR or MPC
even if relying on very recent releases); the inverse trig and
hyperbolic functions because of known slowness in special cases; and
csin / csinh because of observed slowness that I need to investigate
and report to the MPC maintainers. Slowness can be bypassed by moving
to incremental generation (only for new / changed tests) rather than
regenerating the whole of auto-libm-test-out every time, but that
needs implementing. (This patch takes the time for running
gen-auto-libm-tests from about one second to seven, on my system,
which I think is reasonable. The slow functions would make it take
several minutes at least, which seems unreasonable.)
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of ccos, ccosh, cexp, clog,
csqrt, ctan and ctanh.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (TEST_COND_x86_64): New macro.
(TEST_COND_x86): Likewise.
(ccos_test_data): Use AUTO_TESTS_c_c.
(ccosh_test_data): Likewise.
(cexp_test_data): Likewise.
(clog_test_data): Likewise.
(csqrt_test_data): Likewise.
(ctan_test_data): Likewise.
(ctan_tonearest_test_data): Likewise.
(ctan_towardzero_test_data): Likewise.
(ctan_downward_test_data): Likewise.
(ctan_upward_test_data): Likewise.
(ctanh_test_data): Likewise.
(ctanh_tonearest_test_data): Likewise.
(ctanh_towardzero_test_data): Likewise.
(ctanh_downward_test_data): Likewise.
(ctanh_upward_test_data): Likewise.
* math/gen-auto-libm-tests.c (func_calc_method): Add value
mpc_c_c.
(func_calc_desc): Add mpc_c_c union field.
(FUNC_mpc_c_c): New macro.
(test_functions): Add cacos, cacosh, casin, casinh, catan, catanh,
ccos, ccosh, cexp, clog, clog10, csin, csinh, csqrt, ctan and
ctanh.
(special_fill_min_subnorm_p120): New function.
(special_real_inputs): Add min_subnorm_p120.
(calc_generic_results): Handle mpc_c_c.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch moves tests of cabs and carg to auto-libm-test-in, adding
the required support to gen-auto-libm-tests.
Tested x86_64 and x86; no ulps updates needed.
* math/auto-libm-test-in: Add tests of cabs and carg.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (cabs_test_data): Use AUTO_TESTS_c_f.
(carg_test_data): Likewise.
* math/gen-auto-libm-tests.c (func_calc_method): Add value
mpc_c_f.
(func_calc_desc): Add mpc_c_f union field.
(test_functions): Add cabs and carg.
(calc_generic_results): Handle mpc_c_f.
|
|
This patch moves tests of sincos to auto-libm-test-in, adding the
required support to gen-auto-libm-tests.
Tested x86_64 and x86 and ulps updated accordingly.
(auto-libm-test-out diffs omitted below.)
* math/auto-libm-test-in: Add tests of sincos.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (sincos_test_data): Use AUTO_TESTS_fFF_11.
* math/gen-auto-libm-tests.c (func_calc_method): Add value
mpfr_f_11.
(func_calc_desc): Add mpfr_f_11 union field.
(test_functions): Add sincos.
(calc_generic_results): Handle mpfr_f_11.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
math/gen-libm-test.pl has code to beautify names of various constants,
transforming the source form in libm-test.inc into the version
appearing in test names in libm-test-ulps files.
This has become decreasingly relevant over time for the M_* constants,
first as I changed the test names so only the arguments and not the
expected results appeared in them, then as tests have moved to
auto-libm-test-* so that automatically generated hex float constants
get used instead of M_* in test inputs.
This patch removes the beautification for all M_* constants. Tested
x86_64 and x86 and ulps updated accordingly. Even the one case where
this affected the name in the ulps files will disappear once complex
function tests are moved to auto-libm-test-*.
* math/gen-libm-test.pl (%beautify): Remove M_* constants.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
Bug 16293 is inaccuracy of x86/x86_64 versions of expm1, near 0 in
directed rounding modes, that arises from frndint rounding the
exponent to 1 or -1 instead of 0, resulting in large cancellation
error. This inaccuracy in turn affects other functions such as sinh
that use expm1. This patch fixes the problem by setting
round-to-nearest mode temporarily around the affected calls to
frndint. I don't think this is needed for other uses of frndint, such
as in exp itself, as only for expm1 is the cancellation error
significant.
Tested x86_64 and x86 and ulps updated accordingly.
* sysdeps/i386/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]: Set
round-to-nearest mode when using frndint.
* sysdeps/i386/fpu/s_expm1.S (__expm1): Likewise.
* sysdeps/i386/fpu/s_expm1f.S (__expm1f): Likewise.
* sysdeps/x86_64/fpu/e_expl.S (IEEE754_EXPL) [USE_AS_EXPM1L]:
Likewise.
* math/auto-libm-test-in: Add more tests of expm1. Do not expect
sinh test to fail.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (TEST_COND_x86_64): Remove macro.
(TEST_COND_x86): Likewise.
(expm1_tonearest_test_data): New array.
(expm1_test_tonearest): New function.
(expm1_towardzero_test_data): New array.
(expm1_test_towardzero): New function.
(expm1_downward_test_data): New array.
(expm1_test_downward): New function.
(expm1_upward_test_data): New array.
(expm1_test_upward): New function.
(main): Run the new test functions.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
This patch moves tests of jn and yn to auto-libm-test-in, adding the
required support for gen-auto-libm-tests (and adding a missing
assertion there and fixing logic that was broken for functions with
integer arguments).
Tested x86_64 and x86 and ulps updated accordingly.
* math/auto-libm-test-in: Add tests of jn and yn.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (jn_test_data): Use AUTO_TESTS_if_f.
(yn_test_data): Likewise.
* math/gen-auto-libm-tests.c (func_calc_method): Add value
mpfr_if_f.
(func_calc_desc): Add mpfr_if_f union field.
(FUNC_mpfr_if_f): New macro.
(test_functions): Add jn and yn.
(calc_generic_results): Assert type of second input for
mpfr_ff_f. Handle mpfr_if_f.
(output_for_one_input_case): Disable all checking for arguments
fitting floating-point types in case of an integer argument.
* sysdeps/i386/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
As needed on x86.
* math/auto-libm-test-in: Mark some hypot tests no-test-inline.
* math/auto-libm-test-out: Regenerated.
|
|
This patch fixes bug 16338, ldbl-128 logl not handling subnormals
(with consequent inaccuracy for lgammal as well). The fix is simply
to use __frexpl when determining the exponent, as done already in
log2l and log10l. Given the lack of testing of small arguments to any
of the log* functions, appropriate tests are added for all of them.
Tested x86_64 and x86 and ulps updated accordingly, and spot tests
also run for mips64 to confirm the ldbl-128 fix.
Note that while this fixes lgammal inaccuracy for small positive
arguments, I suspect that there will still be problems with spurious
underflows in that case.
* sysdeps/ieee754/ldbl-128/e_logl.c (__ieee754_logl): Use __frexpl
to determine exponent and adjust argument to have exponent of -1.
* math/auto-libm-test-in: Add more tests of log, log10, log1p and
log2.
* math/auto-libm-test-out: Regenerated.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
|
|
|
|
|
|
|
