| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make MANT_DIG shadow the types *_MIN_EXP macro. Replace
calls sites with (MIN_EXP - 1), and simplify.
|
|
Make MANT_DIG shadow the types *_MANT_DIG macro. Replace
calls sites with (MANT_DIG - 1), and simplify.
|
|
C99 and C11 allow but do not require ceil, floor, round and trunc to
raise the "inexact" exception for noninteger arguments. TS 18661-1
requires that this exception not be raised by these functions. This
aligns them with general IEEE semantics, where "inexact" is only
raised if the final step of rounding the infinite-precision result to
the result type is inexact; for these functions, the
infinite-precision integer result is always representable in the
result type, so "inexact" should never be raised.
The generic implementations of ceil, floor and round functions contain
code to force "inexact" to be raised. This patch removes it for round
functions to align them with TS 18661-1 in this regard. The tests
*are* updated by this patch; there are fewer architecture-specific
versions than for ceil and floor, and I fixed the powerpc ones some
time ago. If any others still have the issue, as shown by tests for
round failing with spurious exceptions, they can be fixed separately
by architecture maintainers or others.
Tested for x86_64, x86 and mips64.
[BZ #15479]
* sysdeps/ieee754/dbl-64/s_round.c (huge): Remove variable.
(__round): Do not force "inexact" exception.
* sysdeps/ieee754/dbl-64/wordsize-64/s_round.c (huge): Remove
variable.
(__round): Do not force "inexact" exception.
* sysdeps/ieee754/flt-32/s_roundf.c (huge): Remove variable.
(__roundf): Do not force "inexact" exception.
* sysdeps/ieee754/ldbl-128/s_roundl.c (huge): Remove variable.
(__roundl): Do not force "inexact" exception.
* sysdeps/ieee754/ldbl-96/s_roundl.c (huge): Remove variable.
(__roundl): Do not force "inexact" exception.
* math/libm-test.inc (round_test_data): Do not allow spurious
"inexact" exceptions.
|
|
ldbl-128ibm had an implementation of fmal that just did (x * y) + z in
most cases, with no attempt at actually being a fused operation.
This patch replaces it with a genuine fused operation. It is not
necessarily correctly rounding, but should produce a result at least
as accurate as the long double arithmetic operations in libgcc, which
I think is all that can reasonably be expected for such a non-IEEE
format where arithmetic is approximate rather than rounded according
to any particular rule for determining the exact result. Like the
libgcc arithmetic, it may produce spurious overflow and underflow
results, and it falls back to the libgcc multiplication in the case of
(finite, finite, zero).
This concludes the fixes for bug 13304; any subsequently found fma
issues should go in separate Bugzilla bugs. Various other pieces of
bug 13304 were fixed in past releases over the past several years.
Tested for powerpc.
[BZ #13304]
* sysdeps/ieee754/ldbl-128ibm/s_fmal.c: Include <fenv.h>,
<float.h>, <math_private.h> and <stdlib.h>.
(add_split): New function.
(mul_split): Likewise.
(ext_val): New typedef.
(store_ext_val): New function.
(mul_ext_val): New function.
(compare): New function.
(add_split_ext): New function.
(__fmal): After checking for Inf, NaN and zero, compute result as
an exact sum of scaled double values in round-to-nearest before
adding those up and adjusting for other rounding modes.
* math/auto-libm-test-in: Remove xfail-rounding:ldbl-128ibm from
tests of fma.
* math/auto-libm-test-out: Regenerated.
|
|
libm-test.inc has a comment about signs of NaNs not being tested.
This is out of date since:
commit ce66581742e7ae1d6ce59e5d2d4859b2ae41218c
Author: Joseph Myers <joseph@codesourcery.com>
Date: Sat Nov 16 12:48:35 2013 +0000
Test signs of NaNs in libm-test.inc where appropriate.
This patch removes the inaccurate statement.
* math/libm-test.inc: Update comment not to refer to signs of NaNs
not being tested.
|
|
This makes sure that the extra test objects are compiled with the correct
MODULE_NAME and dependencies are tracked.
|
|
Bug 19848 reports cases where powl on x86 / x86_64 has error
accumulation, for small integer exponents, larger than permitted by
glibc's accuracy goals, at least in some rounding modes. This patch
further restricts the exponent range for which the
small-integer-exponent logic is used to limit the possible error
accumulation.
Tested for x86_64 and x86 and ulps updated accordingly.
[BZ #19848]
* sysdeps/i386/fpu/e_powl.S (p3): Rename to p2 and change value
from 8 to 4.
(__ieee754_powl): Compare integer exponent against 4 not 8.
* sysdeps/x86_64/fpu/e_powl.S (p3): Rename to p2 and change value
from 8 to 4.
(__ieee754_powl): Compare integer exponent against 4 not 8.
* math/auto-libm-test-in: Add more tests of pow.
* math/auto-libm-test-out: Regenerated.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
|
|
When installing glibc (w/mathvec enabled) in-place on a system with
a glibc w/out mathvec enabled, the install will clobber the existing
libm.so (e.g., /lib64/libm-2.21.so) with a linker script. This is
because libm.so is a symlink to libm.so.6 which is a symlink to the
final libm-2.21.so file. When the makefile writes the linker script
directly to libm.so, it gets clobbered.
The simple patch below to math/Makefile fixes this. It is based on
the nptl Makefile, which does exactly the same thing in a safer way.
|
|
When building on i686, x86_64, and arm, and with NDEBUG, or --with-cpu
there are various variables and functions which are unused based on
these settings.
This patch marks all such variables with __attribute__((unused)) to
avoid the compiler warnings when building with the aformentioned
options.
|
|
|
|
A large number of the test-ldouble failures seen for ldbl-128ibm are
spurious "underflow" and "inexact" exceptions. These arise from such
exceptions in the underlying arithmetic; unlike other spurious
exceptions from that arithmetic, they do not in general relate to
cases where the returned result is also substantially inaccurate, are
not so readily avoidable by appropriately conditional libgcc patches,
and are widespread enough to be hard to handle through individual
XFAILing of the affected tests.
Thus, this patch documents relaxed accuracy goals for libm functions
for IBM long double and makes libm-test.inc reflect these spurious
exceptions in ldbl-128ibm arithmetic and always allow them in
ldbl-128ibm testing (while still not allowing these exceptions to be
missing where required to be present). Tested for powerpc.
* manual/math.texi (Errors in Math Functions): Document relaxed
accuracy goals for IBM long double.
* math/libm-test.inc (test_exceptions): Always allow spurious
"underflow" and "inexact" exceptions for IBM long double.
|
|
|
|
|
|
The ldbl-128ibm implementations of remainderl and remquol have logic
resulting in incorrect tests for equality of the absolute values of
the arguments. Equality is tested based on the integer
representations of the high and low parts, with the sign bit masked
off the high part - but when this changes the sign of the high part,
the sign of the low part needs to be changed as well, and failure to
do this means arguments are wrongly treated as equal when they are
not.
This patch fixes the logic to adjust signs of low parts as needed.
Tested for powerpc.
[BZ #19603]
* sysdeps/ieee754/ldbl-128ibm/e_remainderl.c
(__ieee754_remainderl): Adjust sign of integer version of low part
when taking absolute value of high part.
* sysdeps/ieee754/ldbl-128ibm/s_remquol.c (__remquol): Likewise.
* math/libm-test.inc (remainder_test_data): Add another test.
(remquo_test_data): Likewise.
|
|
In ICO C++11 mode ensure that isinff, isinfl, isnanf, and isnanl
are defined. These functions were accidentally removed from the
header as part of commit d9b965fa56350d6eea9f7f438a0714c7ffbb183f,
but being GNU extensions, they should have been left in place.
|
|
On running tests after from-scratch ulps regeneration, I found that
some libm tests failed with ulps in excess of those recorded in the
from-scratch regeneration, which should never happen unless those ulps
exceed the limit on ulps that can go in libm-test-ulps files.
Failure: Test: atan2_upward (inf, -inf)
Result:
is: 2.35619498e+00 0x1.2d97ccp+1
should be: 2.35619450e+00 0x1.2d97c8p+1
difference: 4.76837159e-07 0x1.000000p-21
ulp : 2.0000
max.ulp : 1.0000
Maximal error of `atan2_upward'
is : 2 ulp
accepted: 1 ulp
Failure: Test: carg_upward (-inf + inf i)
Result:
is: 2.35619498e+00 0x1.2d97ccp+1
should be: 2.35619450e+00 0x1.2d97c8p+1
difference: 4.76837159e-07 0x1.000000p-21
ulp : 2.0000
max.ulp : 1.0000
Maximal error of `carg_upward'
is : 2 ulp
accepted: 1 ulp
The problem comes from the addition of tests for the finite-math-only
versions of libm functions. Those tests share ulps with the default
function variants. make regen-ulps runs the default tests before the
finite-math-only tests, concatenating the resulting ulps before
feeding them to gen-libm-test.pl to generate a new libm-test-ulps
file. But gen-libm-test.pl always takes the last ulps value given for
any (function, type) pair. So, if the largest ulps for a function
come from non-finite inputs, a from-scratch regeneration loses those
ulps.
This patch fixes gen-libm-test.pl, in the case where there are
multiple ulps values for a (function, type) pair - which can only
happen as part of a regeneration - to take the largest ulps value
rather than the last one.
Tested for ARM / MIPS / powerpc-nofpu.
* math/gen-libm-test.pl (parse_ulps): Do not reduce
already-recorded ulps.
* sysdeps/arm/libm-test-ulps: Regenerated.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
|
|
* math/Makefile (libm-vec-tests): Move libraries after wrappers.o to fix
"make check" link failure on Ubuntu.
|
|
GLIBC declares isinf and isnan as expected by Unix98 and for C99 programs
these functions are hidden by the generics inf and isnan macros.
However C++11 defines isinf and isnan with the same semantics as C99
but requires that they are functions not macros (C++11 26.8 [c.math]
paragraph 10).
This then results in a conflict for perfectly valid C++11 programs:
--
using std::isinf;
using std::isnan;
double d1 = isinf(1.0);
double d2 = isnan(1.0);
d.cc:3:12: error: ‘constexpr bool std::isinf(double)’ conflicts with a previous declaration
using std::isinf;
[...]
/usr/include/bits/mathcalls.h:201:1: note: previous declaration ‘int isinf(double)’
__MATHDECL_1 (int,isinf,, (_Mdouble_ __value)) __attribute__ ((__const__));
[...]
--
This patch fixes the prototypes by leaving the obsolete functions
defined for C++98 code (since they do not conflict with any standard
function in C++98), however preventing them on C++11.
No issues found in libstdc++ tests and check on x86_64 and i686 with
glibc testsuite.
Patch from Jonathan Wakely <jwakely.gcc@gmail.com>.
[BZ #19439]
* math/bits/mathcalls.h
[!__cplusplus || __cplusplus < 201103L] (isinf): Do not declare
prototype.
[!__cplusplus || __cplusplus < 201103L] (isnan): Likewise.
|
|
|
|
|
|
The nan, nanf and nanl functions handle payload strings by doing e.g.:
if (tagp[0] != '\0')
{
char buf[6 + strlen (tagp)];
sprintf (buf, "NAN(%s)", tagp);
return strtod (buf, NULL);
}
This is an unbounded stack allocation based on the length of the
argument. Furthermore, if the argument starts with an n-char-sequence
followed by ')', that n-char-sequence is wrongly treated as
significant for determining the payload of the resulting NaN, when ISO
C says the call should be equivalent to strtod ("NAN", NULL), without
being affected by that initial n-char-sequence. This patch fixes both
those problems by using the __strtod_nan etc. functions recently
factored out of strtod etc. for that purpose, with those functions
being exported from libc at version GLIBC_PRIVATE.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16961]
[BZ #16962]
* math/s_nan.c (__nan): Use __strtod_nan instead of constructing a
string on the stack for strtod.
* math/s_nanf.c (__nanf): Use __strtof_nan instead of constructing
a string on the stack for strtof.
* math/s_nanl.c (__nanl): Use __strtold_nan instead of
constructing a string on the stack for strtold.
* stdlib/Versions (libc): Add __strtof_nan, __strtod_nan and
__strtold_nan to GLIBC_PRIVATE.
* math/test-nan-overflow.c: New file.
* math/test-nan-payload.c: Likewise.
* math/Makefile (tests): Add test-nan-overflow and
test-nan-payload.
|
|
* math/Makefile ($(inst_libdir)/libm.so): Corrected path to
libmvec_nonshared.a
|
|
Old workaround based on assembly aliases can lead to link fail (bug 19058).
This patch makes workaround in another way to avoid it.
[BZ #19058]
* math/Makefile ($(inst_libdir)/libm.so): Added libmvec_nonshared.a
to AS_NEEDED.
* sysdeps/x86/fpu/bits/math-vector.h: Removed code with old workaround.
* sysdeps/x86_64/fpu/Makefile (libmvec-support,
libmvec-static-only-routines): Added new file.
* sysdeps/x86_64/fpu/svml_finite_alias.S: New file.
|
|
The lgamma (and likewise lgammaf, lgammal) function wrongly sets the
signgam variable even when building for strict ISO C conformance
(-std=c99 / -std=c11), although the user may define such a variable
and it's only in the implementation namespace for POSIX with XSI
extensions enabled.
Following discussions starting at
<https://sourceware.org/ml/libc-alpha/2013-04/msg00767.html> and
<https://sourceware.org/ml/libc-alpha/2015-10/msg00844.html>, it seems
that the safest approach for fixing this particular issue is for
signgam to become a weak alias for a newly exported symbol __signgam,
with the library functions only setting __signgam, at which point
static linker magic will preserve the alias for newly linked binaries
that refer to the library's signgam rather than defining their own,
while breaking the alias for programs that define their own signgam,
with new symbol versions for lgamma functions and with compat symbols
for existing binaries that set both signgam and __signgam.
This patch implements that approach for the fix. signgam is made into
a weak alias. The four symbols __signgam, lgamma, lgammaf, lgammal
get new symbol versions at version GLIBC_2.23, with the existing
versions of lgamma, lgammaf and lgammal becoming compat symbols.
When the compat versions are built, gamma, gammaf and gammal are
aliases for the compat versions (i.e. always set signgam); this is OK
as they are not ISO C functions, and avoids adding new symbol versions
for them unnecessarily. When the compat versions are not built
(i.e. for static linking and for future glibc ports), gamma, gammaf
and gammal are aliases for the new versions that set __signgam. The
ldbl-opt versions are updated accordingly.
The lgamma wrappers are adjusted so that the same source files,
included from different files with different definitions of
USE_AS_COMPAT, can build either the new versions or the compat
versions. Similar changes are made to the ia64 versions (untested).
Tests are added that the lgamma functions do not interfere with a user
variable called signgam for ISO C, with various choices for the size
of that variable, whether it is initialized, and for static and
dynamic linking. The conformtest whitelist entry is removed as well.
Tested for x86_64, x86, mips64 and powerpc, including looking at
objdump --dynamic-syms output to make sure the expected sets of
symbols were aliases. Also spot-tested that a binary built with old
glibc works properly (i.e. gets signgam set) when run with new glibc.
[BZ #15421]
* sysdeps/ieee754/s_signgam.c (signgam): Rename to __signgam,
initialize with 0 and define as weak alias of __signgam.
* include/math.h [!_ISOMAC] (__signgam): Declare.
* math/Makefile (libm-calls): Add w_lgamma_compat.
(tests): Add test-signgam-uchar, test-signgam-uchar-init,
test-signgam-uint, test-signgam-uint-init, test-signgam-ullong and
test-signgam-ullong-init.
(tests-static): Add test-signgam-uchar-static,
test-signgam-uchar-init-static, test-signgam-uint-static,
test-signgam-uint-init-static, test-signgam-ullong-static and
test-signgam-ullong-init-static.
(CFLAGS-test-signgam-uchar.c): New variable.
(CFLAGS-test-signgam-uchar-init.c): Likewise.
(CFLAGS-test-signgam-uchar-static.c): Likewise.
(CFLAGS-test-signgam-uchar-init-static.c): Likewise.
(CFLAGS-test-signgam-uint.c): Likewise.
(CFLAGS-test-signgam-uint-init.c): Likewise.
(CFLAGS-test-signgam-uint-static.c): Likewise.
(CFLAGS-test-signgam-uint-init-static.c): Likewise.
(CFLAGS-test-signgam-ullong.c): Likewise.
(CFLAGS-test-signgam-ullong-init.c): Likewise.
(CFLAGS-test-signgam-ullong-static.c): Likewise.
(CFLAGS-test-signgam-ullong-init-static.c): Likewise.
* math/Versions (libm): Add GLIBC_2.23.
* math/lgamma-compat.h: New file.
* math/test-signgam-main.c: Likewise.
* math/test-signgam-uchar-init-static.c: Likewise.
* math/test-signgam-uchar-init.c: Likewise.
* math/test-signgam-uchar-static.c: Likewise.
* math/test-signgam-uchar.c: Likewise.
* math/test-signgam-uint-init-static.c: Likewise.
* math/test-signgam-uint-init.c: Likewise.
* math/test-signgam-uint-static.c: Likewise.
* math/test-signgam-uint.c: Likewise.
* math/test-signgam-ullong-init-static.c: Likewise.
* math/test-signgam-ullong-init.c: Likewise.
* math/test-signgam-ullong-static.c: Likewise.
* math/test-signgam-ullong.c: Likewise.
* math/w_lgamma.c: Rename to w_lgamma_main.c and replace by
wrapper of w_lgamma_main.c.
* math/w_lgamma_compat.c: New file.
* math/w_lgamma_compatf.c: Likewise.
* math/w_lgamma_compatl.c: Likewise.
* math/w_lgamma_main.c: New file. Based on w_lgamma.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgamma): Change to LGFUNC (__lgamma). Use CALL_LGAMMA.
* math/w_lgammaf.c: Rename to w_lgammaf_main.c and replace by
wrapper of w_lgammaf_main.c.
* math/w_lgammaf_main.c: New file. Based on w_lgammaf.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammaf): Change to LGFUNC (__lgammaf). Use CALL_LGAMMA.
* math/w_lgammal.c: Rename to w_lgammal_main.c and replace by
wrapper of w_lgammal_main.c.
* math/w_lgammal_main.c: New file. Based on w_lgammal.c. Include
<lgamma-compat.h>. Condition contents on [BUILD_LGAMMA]. Support
defining compatibility symbols.
(__lgammal): Change to LGFUNC (__lgammal). Use CALL_LGAMMA.
* sysdeps/ia64/fpu/lgamma-compat.h: New file.
* sysdeps/ia64/fpu/w_lgamma.c: Move to ....
* sysdeps/ia64/fpu/w_lgamma_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgamma): Change to LGFUNC (lgamma). Use CALL_LGAMMA.
(__ieee754_gamma): Define as alias.
* sysdeps/ia64/fpu/w_lgammaf.c: Move to ....
* sysdeps/ia64/fpu/w_lgammaf_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammaf): Change to LGFUNC (lgammaf). Use CALL_LGAMMA.
(__ieee754_gammaf): Define as alias.
* sysdeps/ia64/fpu/w_lgammal.c: Move to ....
* sysdeps/ia64/fpu/w_lgammal_main.c: ...here. Include
<lgamma-compat.h>.
(__ieee754_lgammal): Change to LGFUNC (lgammal). Use CALL_LGAMMA.
(__ieee754_gammal): Define as alias.
* sysdeps/ieee754/ldbl-opt/w_lgamma.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compat.c: ...here. Include
<math/w_lgamma_compat.c>.
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__lgammal_dbl_compat):
Define as alias of __lgamma_compat and use in defining lgammal.
* sysdeps/ieee754/ldbl-opt/w_lgammal.c: Move to ....
* sysdeps/ieee754/ldbl-opt/w_lgamma_compatl.c: ...here. Include
<math/lgamma-compat.h> and <math/w_lgamma_compatl.c>.
(USE_AS_COMPAT): New macro.
(LGAMMA_OLD_VER): Undefine and redefine.
(lgammal): Do not define here.
(gammal): Only define here if [GAMMA_ALIAS].
* conform/linknamespace.pl (@whitelist): Remove signgam.
* sysdeps/nacl/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
|
|
This restores compilation on architectures such as armhfp which
alias acos and acosl because double and long double are the same.
|
|
(bug 19228).
Similar to bug 15491 recently fixed for x86_64 / x86, the powerpc
(both powerpc32 and powerpc64) hard-float implementations of
nearbyintf and nearbyint wrongly clear an "inexact" exception that was
raised before the function was called; this shows up as failure of the
test math/test-nearbyint-except added when that bug was fixed. They
also wrongly leave traps on "inexact" disabled if they were enabled
before the function was called.
This patch fixes the bugs similar to how the x86 bug was fixed: saving
and restoring the whole floating-point state, both to restore the
original "inexact" flag state and to restore the original state of
whether traps on "inexact" were enabled. Because there's a convenient
point in the powerpc implementations to save state after any sNaN
arguments will have raised "invalid" but before "inexact" traps need
to be disabled, no special handling for "invalid" is needed as in the
x86 version.
Tested for powerpc64 and powerpc32, where it fixes the
math/test-nearbyint-except failure as well as fixing the new test
math/test-nearbyint-except-2 added by this patch. Also tested for
x86_64 and x86 that the new test passes.
If powerpc experts see a more efficient way of doing this
(e.g. instruction positioning that's better for pipelines on typical
processors) then of course followups optimizing the fix are welcome.
[BZ #19228]
* sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S (__nearbyint): Save
and restore full floating-point state.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S (__nearbyint):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* math/test-nearbyint-except-2.c: New file.
* math/Makefile (tests): Add test-nearbyint-except-2.
|
|
Prompted by a gcc-patches discussion, this patch adds tests of pow for
the cases where pow (x, 0.5) is required to return a different result
from sqrt (x), as those cases were previously missing from the tests
(although they worked correctly).
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add another test of pow.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (pow_test_data): Add another test.
|
|
I noticed a typo in the messages from the signgam tests I recently
added. This patch fixes it.
Tested for x86_64 and x86.
* math/test-signgam-finite.c (RUN_TESTS): Correct messages about
calls with argument -0.5.
* math/test-signgam-finite-c99.c (RUN_TESTS): Likewise.
|
|
This patch arranges for the libm-test tests to be run for the
finite-math-only function variants, in addition to the existing runs
for out-of-line and bits/mathinline.h inline variants.
gen-libm-test.pl is made to add a flag to all tests with non-finite
inputs or outputs so that they can be skipped at runtime when the
finite-math-only variants are being tested (skipping is for all
rounding modes; that is, -ffinite-math-only is being treated as
excluding overflow cases even when the rounding mode is such that the
overflowed result is finite). errno setting is not tested for these
variants (in general they don't set it, and it's
implementation-defined in ISO C whether it's set on underflow, with
the glibc definition being that it may not be for -ffinite-math-only;
other cases where errno would normally be expected to be set are
mostly excluded as having non-finite or overflowing arguments or
results).
As with the inline function tests, these ones are built with
-D__FINITE_MATH_ONLY=1 to select the function variants, rather than
-ffinite-math-only. Use of -ffinite-math-only would not be suitable
for these tests because it would also affect libm-test.inc code that
e.g. tests whether results are infinities or NaNs - if these function
variants have bugs that incorrectly produce such results, we want them
to show up in the tests, which means the compiler should not be
optimizing the tests on the basis of results being finite.
The finite-math-only functions share the same ulps settings as the
main out-of-line functions.
These interfaces were one significant group of untested ABIs listed at
<https://sourceware.org/ml/libc-alpha/2013-07/msg00386.html>. I
haven't rerun the script to list untested interfaces, but I expect
that the vast bulk of interfaces there are still untested and could do
with testcases being added (or, if applicable, being made compat
symbols; in general, most symbols not starting '_' are safe bets to
add tests for, while _* need more investigation of what the actual
public API is, if any). I'd like to encourage people to help reduce
the accumulation of untested interfaces by adding more tests.
Tested for x86_64 and x86. Given my recent lgamma/gamma and log*
fixes, the new tests pass (before those fixes, the new tests showed up
those bugs, so illustrating the practical utility of having tests for
these function variants).
* math/libm-test.inc (NON_FINITE): New macro.
(enable_test): Do not run tests flagged NON_FINITE if TEST_FINITE.
* math/gen-libm-test.pl (show_exceptions): Add argument
$non_finite.
(parse_args): Update call to show_exceptions.
* math/test-math-finite.h: New file.
* math/test-math-no-finite.h: Likewise.
* math/test-double-finite.c: Likewise.
* math/test-float-finite.c: Likewise.
* math/test-ldouble-finite.c: Likewise.
* math/test-double.c: Include "test-math-no-finite.h".
* math/test-float.c: Include "test-math-no-finite.h".
* math/test-ldouble.c: Include "test-math-no-finite.h".
* math/test-math-inline.h (TEST_FINITE): New macro.
* math/test-math-vector.h (TEST_FINITE): Likewise.
* math/Makefile (test-longdouble-yes): Add test-ldouble-finite.
(libm-tests): Add test-float-finite and test-double-finite.
($(objpfx)test-float-finite.o): New dependency on
$(objpfx)libm-test.stmp.
($(objpfx)test-double-finite.o): Likewise.
($(objpfx)test-ldouble-finite.o): Likewise.
(libm-test-no-inline-cflags): New variable.
(libm-test-finite-cflags): Likewise.
(CFLAGS-test-float-finite.c): Likewise.
(CFLAGS-test-double-finite.c): Likewise.
(CFLAGS-test-ldouble-finite.c): Likewise.
(CFLAGS-test-float.c): Use $(libm-test-no-inline-cflags).
(CFLAGS-test-double.c): Likewise.
(CFLAGS-test-ldouble.c): Likewise.
|
|
The lgamma inline functions in bits/math-finite.h do not set signgam
if __USE_ISOC99, even when other feature test macros mean a standard
such as XSI POSIX is selected for which it should be set. (This is
essentially the opposite issue to bug 15421, the out-of-line versions
setting signgam even when they shouldn't.)
This patch fixes those functions to use __USE_MISC || __USE_XOPEN as
the condition for when to set signgam, since it's the condition for
when math.h declares signgam. The legacy gamma* names are only
declared at all if __USE_MISC || __USE_XOPEN, so they just set signgam
unconditionally.
Tests for certain standards or not using _GNU_SOURCE cannot use
test-skeleton.c (this is a known issue noted on the wiki todo list).
Thus, the new tests that signgam remains not set in ISO C modes do not
use test-skeleton.c. They also define _ISOMAC to avoid running into
declarations in the internal include/ headers that only work in
_GNU_SOURCE mode.
Tested for x86_64 and x86.
[BZ #19211]
* math/bits/math-finite.h (lgamma): Set signgam if [__USE_MISC ||
__USE_XOPEN], not if [!__USE_ISOC99].
(lgammaf): Likewise.
(lgammal): Likewise.
(gamma): Set signgam unconditionally, not if [!__USE_ISOC99].
(gammaf): Likewise.
(gammal): Likewise.
* math/test-signgam-finite-c11.c: New file.
* math/test-signgam-finite-c99.c: Likewise.
* math/test-signgam-finite.c: Likewise.
* math/Makefile (tests): Add test-signgam-finite,
test-signgam-finite-c99 and test-signgam-finite-c11.
(CFLAGS-test-signgam-finite.c): New variable.
(CFLAGS-test-signgam-finite-c99.c): Likewise.
(CFLAGS-test-signgam-finite-c11.c): Likewise.
|
|
bits/math-finite.h maps ldexp functions to corresponding scalbn
functions. This is (a) a namespace bug for C90, which has ldexp but
not scalbn, and (b) in any case useless, since the ldexp and scalbn
functions have identical semantics (for floating-point types with
radix 2), and since the fix for bug 6803 are actually aliases
(presumably the mapping was based around the old bug of scalbn not
setting errno). This patch removes the bogus redirections.
Tested for x86_64 and x86.
[BZ #19209]
* math/bits/math-finite.h (ldexp): Remove declaration.
(ldexpf): Likewise.
(ldexpl): Likewise.
|
|
bits/math-finite.h declares -ffinite-math-only variants of various
functions under conditions not matching those under which the normal
versions are declared.
* math.h only ever includes bits/mathcalls.h to declare float and long
double functions if __USE_ISOC99, but bits/math-finite.h declares
some float functions regardless (long double ones are conditioned on
__MATH_DECLARE_LDOUBLE). (For C90 functions this isn't a
conformance bug because C90 reserves the float and long double
names, but is still contrary to good glibc practice. For some other
functions in older XSI standards it *is* a conformance bug.)
* Some functions are defined as inlines using lgamma_r functions under
conditions where those lgamma_r functions are not themselves
declared.
* hypot is declared under __USE_XOPEN || __USE_ISOC99 in
bits/mathcalls.h, __USE_ISOC99 only in bits/math-finite.h.
* float and long double versions of Bessel functions should be limited
to __USE_MISC (as in bug 18977).
* gamma should not be declared for __USE_XOPEN2K (as in bug 18967).
* remainder should be restricted to __USE_XOPEN_EXTENDED ||
__USE_ISOC99, not unconditional.
* scalb should not be declared for __USE_XOPEN2K8, and scalbf and
scalbl are non-POSIX (as in bug 18967).
This patch fixes all these issues (it doesn't seem worth splitting
them into separate patches or bugs). I put __USE_ISOC99 conditionals,
where needed, around both float and long double declarations, even
though formally redundant around the long double declarations because
__MATH_DECLARE_LDOUBLE isn't defined without __USE_ISOC99; it seemed
clearer that way. The missing declarations of lgamma_r functions are
dealt with by directly using declarations of __lgamma*_r_finite, in
the implementation namespace, rather than having the inlines rely on
asm redirection of lgamma*_r.
After this patch, there are some apparently redundant nested
__USE_ISOC99 conditionals in lgamma / gamma definitions. These
actually reflect a separate bug (the correct condition for the lgamma
inline functions to set signgam is __USE_MISC || __USE_XOPEN, the
condition under which signgam is declared, rather than disabling
setting it if __USE_ISOC99, which includes XSI POSIX versions for
which signgam *should* be set). They'll be fixed as part of a fix for
that bug, which will also add tests for these inlines. I've put a
note about more general conform/ test coverage for -ffinite-math-only
on
<https://sourceware.org/glibc/wiki/Development_Todo/Master#conformtest_improvements>,
alongside other options for which this is also relevant (some of which
have also had such bugs in the past relating to mismatched
conditionals).
I also intend to enable the main libm-test.inc tests for the
math-finite.h functions, but some other bugs in __*_finite need fixing
first.
[BZ #19205]
* math/bits/math-finite.h (acosf): Condition declaration on
[__USE_ISOC99].
(acosl): Likewise.
(acoshf): Likewise.
(acoshl): Likewise.
(asinf): Likewise.
(asinl): Likewise.
(atan2f): Likewise.
(atan2l): Likewise.
(atanhf): Likewise.
(atanhl): Likewise.
(coshf): Likewise.
(coshl): Likewise.
(expf): Likewise.
(expl): Likewise.
(fmodf): Likewise.
(fmodl): Likewise.
(hypot): Change condition to [__USE_XOPEN || __USE_ISOC99].
(j0f): Change condition to [__USE_MISC && __USE_ISOC99].
(j0l): Likewise.
(y0f): Likewise.
(y0l): Likewise.
(j1f): Likewise.
(j1l): Likewise.
(y1f): Likewise.
(y1l): Likewise.
(jnf): Likewise.
(jnl): Likewise.
(ynf): Likewise.
(ynl): Likewise.
(lgammaf_r): Condition declaration on [__USE_ISOC99].
(lgammal_r): Likewise.
(__lgamma_r_finite): New declaration.
(__lgammaf_r_finite): Likewise.
(__lgammal_r_finite): Likewise.
(lgamma): Use __lgamma_r_finite.
(lgammaf): Condition definition on [__USE_ISOC99]. Use
__lgammaf_r_finite.
(lgammal): Condition definition on [__USE_ISOC99]. Use
__lgammal_r_finite.
(gamma): Do not define for [!__USE_MISC && __USE_XOPEN2K]. Use
__lgamma_r_finite.
(gammaf): Condition definition on [__USE_ISOC99]. Use
__lgammaf_r_finite.
(gammal): Condition definition on [__USE_ISOC99]. Use
__lgammal_r_finite.
(logf): Condition declaration on [__USE_ISOC99].
(logl): Likewise.
(log10f): Likewise.
(log10l): Likewise.
(ldexpf): Likewise.
(ldexpl): Likewise.
(powf): Likewise.
(powl): Likewise.
(remainder): Condition declaration on [__USE_XOPEN_EXTENDED ||
__USE_ISOC99].
(remainderf): Condition declaration on [__USE_ISOC99].
(remainderl): Likewise.
(scalb): Do not declare for [!__USE_MISC && __USE_XOPEN2K8].
(scalbf): Change condition to [__USE_MISC && __USE_ISOC99].
(scalbl): Likewise.
(sinhf): Condition declaration on [__USE_ISOC99].
(sinhl): Likewise.
(sqrtf): Likewise.
(sqrtl): Likewise.
|
|
This patch refactors how libm-test.inc handles disabling
errno/exception handling tests, and some other tests, for
__FAST_MATH__ inline function tests.
The macro TEST_INLINE is changed from being defined/undefined to being
defined to 1 or 0, so that it can be tested in "if" conditionals
instead of #if. For tests of errno and exception setting, separate
macros TEST_ERRNO and TEST_EXCEPTIONS are added, and TEST_ERRNO is
also used in the disabling of errno testing for vector function
tests. The relevant conditionals are moved up a function, so that
they take effect before the code that counts the number of tests, so
the inline function tests now accurately report that 0 tests for
exceptions and errno were executed (whereas they previously reported a
large number desipte not running any such tests).
Tested for x86_64 and x86.
* math/test-math-errno.h: New file.
* math/test-math-inline.h (TEST_INLINE): Define to 1 instead of
empty.
(TEST_ERRNO): New macro.
(TEST_EXCEPTIONS): Likewise.
* math/test-math-no-inline.h (TEST_INLINE): Likewise.
(TEST_EXCEPTIONS): Likewise.
* math/test-math-vector.h (TEST_ERRNO): Likewise.
* math/test-double.c: Include "test-math-errno.h".
* math/test-float.c: Likewise.
* math/test-ldouble.c: Likewise.
* math/libm-test.inc (test_single_exception) [!TEST_INLINE]: Make
code unconditional.
(test_exceptions): Only run code if TEST_EXCEPTIONS.
(test_single_errno) [!TEST_INLINE && !TEST_MATHVEC]: Make code
unconditional.
(test_errno): Only run code if TEST_ERRNO.
(enable_test): Use "if" conditional on TEST_INLINE, not #ifdef.
|
|
tgamma, y0, y1, yn, significand).
This patch improves the libm test coverage for a few more functions.
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add more tests of sin, sincos, sinh,
sqrt, tan, tanh, y0, y1 and yn.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (scalb_test_data): Add more tests.
(scalbn_test_data): Likewise.
(scalbln_test_data): Likewise.
(signbit_test_data): Likewise.
(sin_test_data): Likewise.
(sincos_test_data): Likewise.
(sinh_test_data): Likewise.
(sqrt_test_data): Likewise.
(tan_test_data): Likewise.
(tanh_test_data): Likewise.
(tgamma_test_data): Likewise.
(y0_test_data): Likewise.
(y1_test_data): Likewise.
(yn_test_data): Likewise.
(significand_test_data): Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Update.
|
|
remquo, rint).
This patch improves the libm test coverage for a few more functions.
Tested for x86_64 and x86.
* math/libm-test.inc (modf_test_data): Add more tests.
(nearbyint_test_data): Likewise.
(nextafter_test_data): Likewise.
(nexttoward_test_data): Likewise.
(pow_test_data): Likewise.
(remainder_test_data): Likewise.
(remquo_test_data): Likewise.
(rint_test_data): Likewise.
|
|
For some large arguments, the dbl-64 implementation of remainder gives
zero results with the wrong sign, resulting from a subtraction that is
mathematically correct but does not guarantee that a zero result has
the sign of the first argument to remainder. This patch adds an
appropriate check for this case, similar to other implementations of
remainder in the case of equality, and adds tests of remainder on
inputs already used to test remquo.
Tested for x86_64 and x86.
[BZ #19201]
* sysdeps/ieee754/dbl-64/e_remainder.c (__ieee754_remainder):
Check for zero remainder in case of large exponents and ensure
correct sign of result in that case.
* math/libm-test.inc (remainder_test_data): Add more tests.
|
|
nextafter and nexttoward fail to set errno on overflow and underflow.
This patch makes them do so in cases that should include all the cases
where such errno setting is required by glibc's goals for when to set
errno (but not all cases of underflow where the result is nonzero and
so glibc's goals do not require errno setting).
Tested for x86_64, x86, mips64 and powerpc.
[BZ #6799]
* math/s_nextafter.c: Include <errno.h>.
(__nextafter): Set errno on overflow and underflow.
* math/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/i386/fpu/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* sysdeps/i386/fpu/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/i386/fpu/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/flt-32/s_nextafterf.c: Include <errno.h>.
(__nextafterf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128ibm/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-128ibm/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-96/s_nexttoward.c: Include <errno.h>.
(__nexttoward): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-96/s_nexttowardf.c: Include <errno.h>.
(__nexttowardf): Set errno on overflow and underflow.
* sysdeps/ieee754/ldbl-opt/s_nexttowardfd.c: Include <errno.h>.
(__nldbl_nexttowardf): Set errno on overflow and underflow.
* sysdeps/m68k/m680x0/fpu/s_nextafterl.c: Include <errno.h>.
(__nextafterl): Set errno on overflow and underflow.
* math/libm-test.inc (nextafter_test_data): Do not allow errno
setting to be missing on overflow. Add more tests.
(nexttoward_test_data): Likewise.
|
|
When Bessel functions return a zero result from an infinite argument,
the function oscillates as it approaches 0, so the sign of that zero
result should be indeterminate. This patch weakens the expectations
accordingly not to check the sign of such results (the tests were
causing spurious failures for j1 (-Inf) for ldbl-128).
Tested for x86_64 and x86.
* math/libm-test.inc (j0_test_data): Do not test sign of zero
result from infinite argument.
(j1_test_data): Likewise.
(jn_test_data): Likewise.
(y0_test_data): Likewise.
(y1_test_data): Likewise.
(yn_test_data): Likewise.
|
|
The libm drem functions just call the corresponding __remainder
functions. This patch removes the unnecessary wrappers by making them
into weak aliases at the ELF level.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #16171]
* math/w_remainder.c (drem): Define as weak alias of __remainder.
[NO_LONG_DOUBLE] (dreml): Define as weak alias of __remainder.
* math/w_remainderf.c (dremf): Define as weak alias of
__remainderf.
* math/w_remainderl.c (dreml): Define as weak alias of
__remainderl.
* sysdeps/ia64/fpu/e_remainder.S (drem): Define as weak alias of
__remainder.
* sysdeps/ia64/fpu/e_remainderf.S (dremf): Define as weak alias of
__remainderf.
* sysdeps/ia64/fpu/e_remainderl.S (dreml): Define as weak alias of
__remainderl.
* sysdeps/ieee754/ldbl-opt/nldbl-remainder.c (dreml): Define as
weak alias of remainderl.
* sysdeps/ieee754/ldbl-opt/w_remainder.c
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (__drem): Define as strong
alias of __remainder.
[LONG_DOUBLE_COMPAT(libm, GLIBC_2_0)] (dreml): Use compat_symbol.
* sysdeps/ieee754/ldbl-opt/w_remainderl.c (__dreml): Define as
strong alias of __remainderl.
(dreml): Use long_double_symbol.
* math/Makefile (libm-calls): Remove w_drem.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove drem.
(CFLAGS-nldbl-drem.c): Remove variable.
(CFLAGS-nldbl-remainder.c): Add -fno-builtin-dreml.
* math/w_drem.c: Remove file.
* math/w_dremf.c: Likewise.
* math/w_dreml.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-drem.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_drem.c: Likewise.
* sysdeps/ieee754/ldbl-opt/w_dreml.c: Likewise.
|
|
libm-test.inc has a macro BUILD_COMPLEX to construct a complex number
with given real and imaginary parts while allowing properly for signed
zeroes, infinities and NaNs (which don't work properly with a simple
real + I * imag, in the absence of compiler support for imaginary
types), using assignment to __real__ and __imag__ parts of the number.
C11 defines CMPLX* macros for this purpose, which GCC 4.7 and above
provide suitable built-in functions for. This patch redefines
BUILD_COMPLEX in terms of the standard macros.
Tested for x86_64 and x86.
* math/libm-test.inc (BUILD_COMPLEX): Remove macro.
* math/test-double.h (BUILD_COMPLEX): New macro.
* math/test-float.h (BUILD_COMPLEX): Likewise.
* math/test-ldouble.h (BUILD_COMPLEX): Likewise.
|
|
C11 defines standard <float.h> macros *_TRUE_MIN for the least
positive subnormal value of a type. Now that we build with
-std=gnu11, we can use these macros in glibc. This patch replaces
previous uses of the GCC predefines __*_DENORM_MIN__ (used in
<float.h> to define *_TRUE_MIN), as well as *_DENORM_MIN references in
comments.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch). Also tested for powerpc that
installed stripped shared libraries are unchanged by the patch.
* math/libm-test.inc (min_subnorm_value): Use LDBL_TRUE_MIN,
DBL_TRUE_MIN and FLT_TRUE_MIN instead of __LDBL_DENORM_MIN__,
__DBL_DENORM_MIN__ and __FLT_DENORM_MIN__.
* sysdeps/ieee754/dbl-64/s_fma.c (__fma): Refer to DBL_TRUE_MIN
instead of DBL_DENORM_MIN in comment.
* sysdeps/ieee754/ldbl-128/s_fmal.c (__fmal): Refer to
LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment.
* sysdeps/ieee754/ldbl-128ibm/s_nextafterl.c: Include <float.h>.
(__nextafterl): Use LDBL_TRUE_MIN instead of __LDBL_DENORM_MIN__.
* sysdeps/ieee754/ldbl-96/s_fmal.c (__fmal): Refer to
LDBL_TRUE_MIN instead of LDBL_DENORM_MIN in comment.
|
|
The i386 and x86_64 versions of fesetenv, when called with FE_DFL_ENV
or FE_NOMASK_ENV as argument, do not clear SSE exceptions raised in
MXCSR. These arguments should, like other fenv_t values, represent
the whole of the floating-point state, so such exceptions should be
cleared; this patch adds the required clearing. (Discovered while
working on bug 16068.)
Tested for x86_64 and x86.
[BZ #19181]
* sysdeps/i386/fpu/fesetenv.c (__fesetenv): Clear already-raised
SSE exceptions when argument is FE_DFL_ENV or FE_NOMASK_ENV.
* sysdeps/x86_64/fpu/fesetenv.c (__fesetenv): Likewise.
* math/test-fenv-clear-main.c: New file.
* math/test-fenv-clear.c: Likewise.
* math/Makefile (tests): Add test-fenv-clear.
* sysdeps/x86/fpu/test-fenv-clear-sse.c: New file.
* sysdeps/x86/fpu/Makefile [$(subdir) = math] (tests): Add
test-fenv-clear-sse.
[$(subdir) = math] (CFLAGS-test-fenv-clear-sse.c): New variable.
|
|
Now that we build with -std=gnu11, we can use C11 <float.h> macros
such as FLT_DECIMAL_DIG instead of the GCC predefines such as
__FLT_DECIMAL_DIG__ that are used internally in <float.h>. This patch
makes libm-test.inc do so.
Tested for x86_64 and x86.
* math/libm-test.inc (TYPE_DECIMAL_DIG): Use LDBL_DECIMAL_DIG,
DBL_DECIMAL_DIG and FLT_DECIMAL_DIG instead of __DECIMAL_DIG__,
__DBL_DECIMAL_DIG__ and __FLT_DECIMAL_DIG__.
|
|
Now that GCC 4.7 or later is required to build glibc, this patch moves
the build from using -std=gnu99 to -std=gnu11 (option added in 4.7).
This allows use of C11 features from GCC's headers, such as new
float.h macros and max_align_t.
Tested for x86_64 and x86 (testsuite; installed stripped shared
libraries are unchanged by the patch on x86_64, while I see some
slight code reordering of no significance on x86).
* Makeconfig (CFLAGS): Use -std=gnu11 instead of -std=gnu99.
* Makefile ($(objpfx)c++-types-check.out): Filter out -std=gnu11
instead of -std=gnu99.
* configure.ac (systemtap): Test with -std=gnu11 instead of
-std=gnu99.
* configure: Regenerated.
* math/gen-auto-libm-tests.c: Use -std=gnu11 instead of -std=gnu99
in compilation command in comment.
|
|
libm-test.inc has special-case code treating errors of up to 0.5 ulp
as allowed (for functions that aren't exactly determined) even if no
such errors appeared in libm-test-ulps. This only applies to avoid
errors for individual function calls, not for the overall check of
ulps at the end of testing a function, resulting in confusing output
of the form:
testing double (without inline functions)
Maximal error of `log_upward'
is : 1 ulp
accepted: 0 ulp
with no report of what testcase produced that error. This patch
removes the special case, so that instead you get:
testing double (without inline functions)
Failure: Test: log_upward (0x1.0000000000001p+0)
Result:
is: 2.2204460492503129e-16 0x1.fffffffffffffp-53
should be: 2.2204460492503131e-16 0x1.0000000000000p-52
difference: 2.4651903288156619e-32 0x1.0000000000000p-105
ulp : 0.5000
max.ulp : 0.0000
Maximal error of `log_upward'
is : 1 ulp
accepted: 0 ulp
(for formats other than ldbl-128ibm, 0.5 ulp errors only occur in
unusual cases such as this where the correctly rounded result is a
power of 2 and the computed result is just below it). This should not
affect which cases result in the test failing, just ensure that if it
fails then some failure for an individual function call was reported.
Tested for x86_64 and x86.
* math/libm-test.inc (check_float_internal): Do not special-case
errors up to 0.5 ulp.
|
|
This patch improves the libm test coverage for a few more functions.
Tested for x86_64 and x86.
* math/auto-libm-test-in: Add more tests of log, log10, log1p and
log2.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (MAX_EXP): New macro.
(ilogb_test_data): Add more tests.
(isfinite_test_data): Likewise.
(isgreater_test_data): Likewise.
(isgreaterequal_test_data): Likewise.
(isinf_test_data): Likewise.
(isless_test_data): Likewise.
(islessequal_test_data): Likewise.
(islessgreater_test_data): Likewise.
(isnan_test_data): Likewise.
(isnormal_test_data): Likewise.
(issignaling_test_data): Likewise.
(isunordered_test_data): Likewise.
(j0_test_data): Likewise.
(j1_test_data): Likewise.
(jn_test_data): Likewise.
(lgamma_test_data): Likewise.
(log_test_data): Likewise.
(log10_test_data): Likewise.
(log1p_test_data): Likewise.
(log2_test_data): Likewise.
(logb_test_data): Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
|
|
j1 and jn can underflow for small arguments, but fail to set errno
when underflowing to 0. This patch fixes them to set errno in that
case.
Tested for x86_64, x86, mips64 and powerpc.
[BZ #18611]
* sysdeps/ieee754/dbl-64/e_j1.c (__ieee754_j1): Set errno and
avoid excess range and precision on underflow.
* sysdeps/ieee754/dbl-64/e_jn.c (__ieee754_jn): Likewise.
* sysdeps/ieee754/flt-32/e_j1f.c (__ieee754_j1f): Likewise.
* sysdeps/ieee754/flt-32/e_jnf.c (__ieee754_jnf): Likewise.
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Set errno on
underflow.
* sysdeps/ieee754/ldbl-128/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/e_jnl.c (__ieee754_jnl): Likewise.
* sysdeps/ieee754/ldbl-96/e_j1l.c (__ieee754_j1l): Likewise.
* sysdeps/ieee754/ldbl-96/e_jnl.c (__ieee754_jnl): Likewise.
* math/auto-libm-test-in: Do not allow missing errno setting for
tests of j1 and jn.
* math/auto-libm-test-out: Regenerated.
|
|
The implementations of nearbyint functions using x87 floating point
(i386 all versions, x86_64 long double only) use the fclex
instruction, which clears any exceptions that were raised before the
function was called. These functions must not clear exceptions that
were raised before they were called.
This patch fixes these functions to save and restore the whole
floating-point environment (fnstenv / fldenv) as the way of avoiding
raising "inexact" (recall that there isn't an x87 instruction for
loading just the status word, so the whole environment has to be saved
and loaded instead - the code already saved and loaded the control
word, which is now obtained from the saved environment after this
patch, to disable traps on "inexact"). In the case of the long double
functions, any "invalid" exception from frndint (applied to a
signaling NaN) needs merging into the saved state; this issue doesn't
apply to the float and double functions because that exception would
have been raised when the argument is loaded, before the environment
is saved.
[BZ #15491]
* sysdeps/i386/fpu/s_nearbyint.S (__nearbyint): Save and restore
floating-point environment instead of clearing all exceptions.
* sysdeps/i386/fpu/s_nearbyintf.S (__nearbyintf): Likewise.
* sysdeps/i386/fpu/s_nearbyintl.S (__nearbyintl): Likewise,
merging in "invalid" exceptions from frndint.
* sysdeps/x86_64/fpu/s_nearbyintl.S (__nearbyintl): Likewise.
* math/test-nearbyint-except.c: New file.
* math/Makefile (tests): Add test-nearbyint-except.
|
|
log10, log2).
This patch improves the libm test coverage for a few more functions.
Tested for x86_64 and x86.
2015-10-21 Joseph Myers <joseph@codesourcery.com>
* math/auto-libm-test-in: Add more tests of hypot, j0, j1, jn,
log, log10 and log2.
* math/auto-libm-test-out: Regenerated.
* math/libm-test.inc (fmod_test_data): Add more tests.
(fpclassify_test_data): Likewise.
(frexp_test_data): Likewise.
(hypot_test_data): Likewise.
(ilogb_test_data): Likewise.
|
|
assertions).
This mostly automatically-generated patch converts 113 function
definitions in glibc from old-style K&R to prototype-style. Following
my other recent such patches, this one deals with the case of function
definitions in files that either contain assertions or where grep
suggested they might contain assertions - and thus where it isn't
possible to use a simple object code comparison as a sanity check on
the correctness of the patch, because line numbers are changed.
A few such automatically-generated changes needed to be supplemented
by manual changes for the result to compile. openat64 had a prototype
declaration with "..." but an old-style definition in
sysdeps/unix/sysv/linux/dl-openat64.c, and "..." needed adding to the
generated prototype in the definition (I've filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=68024> for diagnosing
such cases in GCC; the old state was undefined behavior not requiring
a diagnostic, but one seems a good idea). In addition, as Florian has
noted regparm attribute mismatches between declaration and definition
are only diagnosed for prototype definitions, and five functions
needed internal_function added to their definitions (in the case of
__pthread_mutex_cond_lock, via the macro definition of
__pthread_mutex_lock) to compile on i386.
After this patch is in, remaining old-style definitions are probably
most readily fixed manually before we can turn on
-Wold-style-definition for all builds.
Tested for x86_64 and x86 (testsuite).
* crypt/md5-crypt.c (__md5_crypt_r): Convert to prototype-style
function definition.
* crypt/sha256-crypt.c (__sha256_crypt_r): Likewise.
* crypt/sha512-crypt.c (__sha512_crypt_r): Likewise.
* debug/backtracesyms.c (__backtrace_symbols): Likewise.
* elf/dl-minimal.c (_itoa): Likewise.
* hurd/hurdmalloc.c (malloc): Likewise.
(free): Likewise.
(realloc): Likewise.
* inet/inet6_option.c (inet6_option_space): Likewise.
(inet6_option_init): Likewise.
(inet6_option_append): Likewise.
(inet6_option_alloc): Likewise.
(inet6_option_next): Likewise.
(inet6_option_find): Likewise.
* io/ftw.c (FTW_NAME): Likewise.
(NFTW_NAME): Likewise.
(NFTW_NEW_NAME): Likewise.
(NFTW_OLD_NAME): Likewise.
* libio/iofwide.c (_IO_fwide): Likewise.
* libio/strops.c (_IO_str_init_static_internal): Likewise.
(_IO_str_init_static): Likewise.
(_IO_str_init_readonly): Likewise.
(_IO_str_overflow): Likewise.
(_IO_str_underflow): Likewise.
(_IO_str_count): Likewise.
(_IO_str_seekoff): Likewise.
(_IO_str_pbackfail): Likewise.
(_IO_str_finish): Likewise.
* libio/wstrops.c (_IO_wstr_init_static): Likewise.
(_IO_wstr_overflow): Likewise.
(_IO_wstr_underflow): Likewise.
(_IO_wstr_count): Likewise.
(_IO_wstr_seekoff): Likewise.
(_IO_wstr_pbackfail): Likewise.
(_IO_wstr_finish): Likewise.
* locale/programs/localedef.c (normalize_codeset): Likewise.
* locale/programs/locarchive.c (add_locale_to_archive): Likewise.
(add_locales_to_archive): Likewise.
(delete_locales_from_archive): Likewise.
* malloc/malloc.c (__libc_mallinfo): Likewise.
* math/gen-auto-libm-tests.c (init_fp_formats): Likewise.
* misc/tsearch.c (__tfind): Likewise.
* nptl/pthread_attr_destroy.c (__pthread_attr_destroy): Likewise.
* nptl/pthread_attr_getdetachstate.c
(__pthread_attr_getdetachstate): Likewise.
* nptl/pthread_attr_getguardsize.c (pthread_attr_getguardsize):
Likewise.
* nptl/pthread_attr_getinheritsched.c
(__pthread_attr_getinheritsched): Likewise.
* nptl/pthread_attr_getschedparam.c
(__pthread_attr_getschedparam): Likewise.
* nptl/pthread_attr_getschedpolicy.c
(__pthread_attr_getschedpolicy): Likewise.
* nptl/pthread_attr_getscope.c (__pthread_attr_getscope):
Likewise.
* nptl/pthread_attr_getstack.c (__pthread_attr_getstack):
Likewise.
* nptl/pthread_attr_getstackaddr.c (__pthread_attr_getstackaddr):
Likewise.
* nptl/pthread_attr_getstacksize.c (__pthread_attr_getstacksize):
Likewise.
* nptl/pthread_attr_init.c (__pthread_attr_init_2_1): Likewise.
(__pthread_attr_init_2_0): Likewise.
* nptl/pthread_attr_setdetachstate.c
(__pthread_attr_setdetachstate): Likewise.
* nptl/pthread_attr_setguardsize.c (pthread_attr_setguardsize):
Likewise.
* nptl/pthread_attr_setinheritsched.c
(__pthread_attr_setinheritsched): Likewise.
* nptl/pthread_attr_setschedparam.c
(__pthread_attr_setschedparam): Likewise.
* nptl/pthread_attr_setschedpolicy.c
(__pthread_attr_setschedpolicy): Likewise.
* nptl/pthread_attr_setscope.c (__pthread_attr_setscope):
Likewise.
* nptl/pthread_attr_setstack.c (__pthread_attr_setstack):
Likewise.
* nptl/pthread_attr_setstackaddr.c (__pthread_attr_setstackaddr):
Likewise.
* nptl/pthread_attr_setstacksize.c (__pthread_attr_setstacksize):
Likewise.
* nptl/pthread_condattr_setclock.c (pthread_condattr_setclock):
Likewise.
* nptl/pthread_create.c (__find_in_stack_list): Likewise.
* nptl/pthread_getattr_np.c (pthread_getattr_np): Likewise.
* nptl/pthread_mutex_cond_lock.c (__pthread_mutex_lock): Define to
use internal_function.
* nptl/pthread_mutex_init.c (__pthread_mutex_init): Convert to
prototype-style function definition.
* nptl/pthread_mutex_lock.c (__pthread_mutex_lock): Likewise.
(__pthread_mutex_cond_lock_adjust): Likewise. Use
internal_function.
* nptl/pthread_mutex_timedlock.c (pthread_mutex_timedlock):
Convert to prototype-style function definition.
* nptl/pthread_mutex_trylock.c (__pthread_mutex_trylock):
Likewise.
* nptl/pthread_mutex_unlock.c (__pthread_mutex_unlock_usercnt):
Likewise.
(__pthread_mutex_unlock): Likewise.
* nptl_db/td_ta_clear_event.c (td_ta_clear_event): Likewise.
* nptl_db/td_ta_set_event.c (td_ta_set_event): Likewise.
* nptl_db/td_thr_clear_event.c (td_thr_clear_event): Likewise.
* nptl_db/td_thr_event_enable.c (td_thr_event_enable): Likewise.
* nptl_db/td_thr_set_event.c (td_thr_set_event): Likewise.
* nss/makedb.c (process_input): Likewise.
* posix/fnmatch.c (__strchrnul): Likewise.
(__wcschrnul): Likewise.
(fnmatch): Likewise.
* posix/fnmatch_loop.c (FCT): Likewise.
* posix/glob.c (globfree): Likewise.
(__glob_pattern_type): Likewise.
(__glob_pattern_p): Likewise.
* posix/regcomp.c (re_compile_pattern): Likewise.
(re_set_syntax): Likewise.
(re_compile_fastmap): Likewise.
(regcomp): Likewise.
(regerror): Likewise.
(regfree): Likewise.
* posix/regexec.c (regexec): Likewise.
(re_match): Likewise.
(re_search): Likewise.
(re_match_2): Likewise.
(re_search_2): Likewise.
(re_search_stub): Likewise. Use internal_function
(re_copy_regs): Likewise.
(re_set_registers): Convert to prototype-style function
definition.
(prune_impossible_nodes): Likewise. Use internal_function.
* resolv/inet_net_pton.c (inet_net_pton): Convert to
prototype-style function definition.
(inet_net_pton_ipv4): Likewise.
* stdlib/strtod_l.c (____STRTOF_INTERNAL): Likewise.
* sysdeps/pthread/aio_cancel.c (aio_cancel): Likewise.
* sysdeps/pthread/aio_suspend.c (aio_suspend): Likewise.
* sysdeps/pthread/timer_delete.c (timer_delete): Likewise.
* sysdeps/unix/sysv/linux/dl-openat64.c (openat64): Likewise.
Make variadic.
* time/strptime_l.c (localtime_r): Convert to prototype-style
function definition.
* wcsmbs/mbsnrtowcs.c (__mbsnrtowcs): Likewise.
* wcsmbs/mbsrtowcs_l.c (__mbsrtowcs_l): Likewise.
* wcsmbs/wcsnrtombs.c (__wcsnrtombs): Likewise.
* wcsmbs/wcsrtombs.c (__wcsrtombs): Likewise.
|
