aboutsummaryrefslogtreecommitdiff
path: root/manual/threads.texi
AgeCommit message (Collapse)AuthorFilesLines
2020-07-06manual: Document __libc_single_threadedFlorian Weimer1-0/+113
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com> Reviewed-by: DJ Delorie <dj@redhat.com>
2020-07-06Linux: Perform rseq registration at C startup and thread creationMathieu Desnoyers1-0/+64
Register rseq TLS for each thread (including main), and unregister for each thread (excluding main). "rseq" stands for Restartable Sequences. See the rseq(2) man page proposed here: https://lkml.org/lkml/2018/9/19/647 Those are based on glibc master branch commit 3ee1e0ec5c. The rseq system call was merged into Linux 4.18. The TLS_STATIC_SURPLUS define is increased to leave additional room for dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working. The increase (76 bytes) is larger than 32 bytes because it has not been increased in quite a while. The cost in terms of additional TLS storage is quite significant, but it will also obscure some initial-exec-related dlopen failures.
2020-06-15manual: Add pthread_attr_setsigmask_np, pthread_attr_getsigmask_npFlorian Weimer1-0/+72
And the PTHREAD_ATTR_NO_SIGMASK_NP constant.
2020-05-20manual: Add missing section and node for clockid_t wait functionsFlorian Weimer1-0/+8
Without this, these functions appear under the node Default Thread Attributes, which is confusing. Eventually, the documentation should be merged with the (yet to be documented) standardized functions. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2019-11-04nptl: Fix niggles with pthread_clockjoin_npMike Crowe1-1/+1
Joseph Myers spotted[1] that 69ca4b54c151cec42ccca5e05790efc1a8206b47 added pthread_clockjoin_np to sysdeps/nptl/pthread.h but not to its hppa-specific equivalent sysdeps/unix/sysv/linux/hppa/pthread.h. Rafal Luzynski spotted[2] typos in the NEWS entry and manual updates too. Florian Weimer spotted[3] that the clockid parameter was not using a reserved identifier in pthread.h. [1] https://sourceware.org/ml/libc-alpha/2019-11/msg00016.html [2] https://sourceware.org/ml/libc-alpha/2019-11/msg00019.html [3] https://sourceware.org/ml/libc-alpha/2019-11/msg00022.html Reviewed-by: Joseph Myers <joseph@codesourcery.com> Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com> Reviewed-by: Florian Weimer <fw@deneb.enyo.de>
2019-11-01nptl: Add pthread_clockjoin_npMike Crowe1-0/+12
Introduce pthread_clockjoin_np as a version of pthread_timedjoin_np that accepts a clockid_t parameter to indicate which clock the timeout should be measured against. This mirrors the recently-added POSIX-proposed "clock" wait functions. Checked on x86_64-linux-gnu. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-11-01manual: Add documentation for pthread_tryjoin_np and pthread_timedjoin_npMike Crowe1-2/+24
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-10-30Revise the documentation of simple calendar time.Zack Weinberg1-1/+1
This is a thorough revision of all the material relating to the functions time, stime, gettimeofday, settimeofday, clock_gettime, clock_getres, clock_settime, and difftime, spilling over into the discussion of time-related data types (which now get their own section) and touching the adjtime family as well (which deserves its own thorough revision, but I'd have to do a bunch of research first). Substantive changes are: * Document clock_gettime, clock_getres, and clock_settime. (Only CLOCK_REALTIME and CLOCK_MONOTONIC are documented; the others are either a bit too Linux-specific, or have more to do with measuring CPU/processor time. That section _also_ deserves its own thorough revision but again I'd have to do a bunch of research first.) * Present gettimeofday, settimeofday, and struct timeval as obsolete relative to clock_*. * Remove the documentation of struct timezone. Matching POSIX, say that the type of the second argument to gettimeofday and settimeofday is [const] void *. * Clarify ISO C and POSIX's requirements on time_t. Clarify the circumstances under which difftime is equivalent to simple subtraction. * Consolidate documentation of most of the time-related data types into a new section "Time Types," right after "Time Basics." (The exceptions are struct tm, which stays in "Broken-down Time," and struct times, which stays in "Processor And CPU Time." * The "Elapsed Time" section is now called "Calculating Elapsed Time" and includes only difftime and the discussion of how to compute timeval differences by hand. * Fold the "Simple Calendar Time," "High Resolution Calendar," and "High Accuracy Clock" sections together into two new sections titled "Getting the Time" and "Setting and Adjusting the Time."
2019-07-12nptl: Add POSIX-proposed pthread_rwlock_clockrdlock & pthread_rwlock_clockwrlockMike Crowe1-0/+28
Add: int pthread_rwlock_clockrdlock (pthread_rwlock_t *rwlock, clockid_t clockid, const struct timespec *abstime) and: int pthread_rwlock_clockwrlock (pthread_rwlock_t *rwlock, clockid_t clockid, const struct timespec *abstime) which behave like pthread_rwlock_timedrdlock and pthread_rwlock_timedwrlock respectively, except they always measure abstime against the supplied clockid. The functions currently support CLOCK_REALTIME and CLOCK_MONOTONIC and return EINVAL if any other clock is specified. * sysdeps/nptl/pthread.h: Add pthread_rwlock_clockrdlock and pthread_wrlock_clockwrlock. * nptl/Makefile: Build pthread_rwlock_clockrdlock.c and pthread_rwlock_clockwrlock.c. * nptl/pthread_rwlock_clockrdlock.c: Implement pthread_rwlock_clockrdlock. * nptl/pthread_rwlock_clockwrlock.c: Implement pthread_rwlock_clockwrlock. * nptl/pthread_rwlock_common.c (__pthread_rwlock_rdlock_full): Add clockid parameter and verify that it indicates a supported clock on entry so that we fail even if it doesn't end up being used. Pass that clock on to futex_abstimed_wait when necessary. (__pthread_rwlock_wrlock_full): Likewise. * nptl/pthread_rwlock_rdlock.c: (__pthread_rwlock_rdlock): Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full even though it won't be used because there's no timeout. * nptl/pthread_rwlock_wrlock.c (__pthread_rwlock_wrlock): Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full even though it won't be used because there is no timeout. * nptl/pthread_rwlock_timedrdlock.c (pthread_rwlock_timedrdlock): Pass CLOCK_REALTIME to __pthread_rwlock_rdlock_full since abstime uses that clock. * nptl/pthread_rwlock_timedwrlock.c (pthread_rwlock_timedwrlock): Pass CLOCK_REALTIME to __pthread_rwlock_wrlock_full since abstime uses that clock. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist (GLIBC_2.30): Likewise. * nptl/tst-abstime.c (th): Add pthread_rwlock_clockrdlock and pthread_rwlock_clockwrlock timeout tests to match the existing pthread_rwlock_timedrdloock and pthread_rwlock_timedwrlock tests. * nptl/tst-rwlock14.c (do_test): Likewise. * nptl/tst-rwlock6.c Invent verbose_printf macro, and use for ancillary output throughout. (tf): Accept thread_args structure so that rwlock, a clockid and function name can be passed to the thread. (do_test_clock): Rename from do_test. Accept clockid parameter to specify test clock. Use the magic clockid value of CLOCK_USE_TIMEDLOCK to indicate that pthread_rwlock_timedrdlock and pthread_rwlock_timedwrlock should be tested, otherwise pass the specified clockid to pthread_rwlock_clockrdlock and pthread_rwlock_clockwrlock. Use xpthread_create and xpthread_join. (do_test): Call do_test_clock to test each clockid in turn. * nptl/tst-rwlock7.c: Likewise. * nptl/tst-rwlock9.c (writer_thread, reader_thread): Accept thread_args structure so that the (now int) thread number, the clockid and the function name can be passed to the thread. (do_test_clock): Renamed from do_test. Pass the necessary thread_args when creating the reader and writer threads. Use xpthread_create and xpthread_join. (do_test): Call do_test_clock to test each clockid in turn. * manual/threads.texi: Add documentation for pthread_rwlock_clockrdlock and pthread_rwlock_clockwrclock. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-07-12nptl: Add POSIX-proposed pthread_cond_clockwaitMike Crowe1-0/+20
Add: int pthread_cond_clockwait (pthread_cond_t *cond, pthread_mutex_t *mutex, clockid_t clockid, const struct timespec *abstime) which behaves just like pthread_cond_timedwait except it always measures abstime against the supplied clockid. Currently supports CLOCK_REALTIME and CLOCK_MONOTONIC and returns EINVAL if any other clock is specified. Includes feedback from many others. This function was originally proposed[1] as pthread_cond_timedwaitonclock_np, but The Austin Group preferred the new name. * nptl/Makefile: Add tst-cond26 and tst-cond27 * nptl/Versions (GLIBC_2.30): Add pthread_cond_clockwait * sysdeps/nptl/pthread.h: Likewise * nptl/forward.c: Add __pthread_cond_clockwait * nptl/forward.c: Likewise * nptl/pthreadP.h: Likewise * sysdeps/nptl/pthread-functions.h: Likewise * nptl/pthread_cond_wait.c (__pthread_cond_wait_common): Add clockid parameter and comment describing why we don't need to check its value. Use that value when calling futex_abstimed_wait_cancelable rather than reading the clock from the flags. (__pthread_cond_wait): Pass unused clockid parameter. (__pthread_cond_timedwait): Read clock from flags and pass it to __pthread_cond_wait_common. (__pthread_cond_clockwait): Add new function with weak alias from pthread_cond_clockwait. * sysdeps/mach/hurd/i386/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist * (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): * Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist (GLIBC_2.30): Likewise. * nptl/tst-cond11.c (run_test): Support testing pthread_cond_clockwait too by using a special magic CLOCK_USE_ATTR_CLOCK value to determine whether to call pthread_cond_timedwait or pthread_cond_clockwait. (do_test): Pass CLOCK_USE_ATTR_CLOCK for existing tests, and add new tests using all combinations of CLOCK_MONOTONIC and CLOCK_REALTIME. * ntpl/tst-cond26.c: New test for passing unsupported and * invalid clocks to pthread_cond_clockwait. * nptl/tst-cond27.c: Add test similar to tst-cond5.c, but using struct timespec and pthread_cond_clockwait. * manual/threads.texi: Document pthread_cond_clockwait. The * comment was provided by Carlos O'Donell. [1] https://sourceware.org/ml/libc-alpha/2015-07/msg00193.html Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2019-07-12nptl: Add POSIX-proposed sem_clockwaitMike Crowe1-0/+10
Add: int sem_clockwait (sem_t *sem, clockid_t clock, const struct timespec *abstime) which behaves just like sem_timedwait, but measures abstime against the specified clock. Currently supports CLOCK_REALTIME and CLOCK_MONOTONIC and sets errno == EINVAL if any other clock is specified. * nptl/sem_waitcommon.c (do_futex_wait, __new_sem_wait_slow): Add clockid parameters to indicate the clock which abstime should be measured against. * nptl/sem_timedwait.c (sem_timedwait), nptl/sem_wait.c (__new_sem_wait): Pass CLOCK_REALTIME as clockid to __new_sem_wait_slow. * nptl/sem_clockwait.c: New file to implement sem_clockwait based on sem_timedwait.c. * nptl/Makefile: Add sem_clockwait.c source file. Add CFLAGS for sem_clockwait.c to match those used for sem_timedwait.c. * sysdeps/pthread/semaphore.h: Add sem_clockwait. * nptl/Versions (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/aarch64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/alpha/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/arm/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/csky/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/hppa/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/i386/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/ia64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/microblaze/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/nios2/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sh/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libpthread.abilist (GLIBC_2.30): Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libpthread.abilist (GLIBC_2.30): Likewise. * nptl/tst-sem17.c: Add new test for passing invalid clock to sem_clockwait. * nptl/tst-sem13.c, nptl/tst-sem5.c: Modify existing sem_timedwait tests to also test sem_clockwait. * manual/threads.texi: Document sem_clockwait. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2018-07-24Add manual documentation for threads.hRical Jasan1-7/+552
This patch updates the manual and adds a new chapter to the manual, explaining types macros, constants and functions defined by ISO C11 threads.h standard. [BZ# 14092] * manual/debug.texi: Update adjacent chapter name. * manual/probes.texi: Likewise. * manual/threads.texi (ISO C Threads): New section. (POSIX Threads): Convert to a section.
2017-06-15manual: Replace summary.awk with summary.pl.Rical Jasan1-12/+6
The Summary is now generated from @standards, and syntax-checking is performed. If invalid @standards syntax is detected, summary.pl will fail, reporting all errors. Failure and error reporting is disabled for now, however, since much of the manual is still incomplete wrt. header and standards annotations. Note that the sorting order of the Summary has changed; summary.pl respects the locale, like summary.awk did, but the use of LC_ALL=C is introduced in the Makefile. Other notable deviations are improved detection of the annotated elements' names, which are used for sorting, and improved detection of the @node used to reference into the manual. The most noticeable difference in the rendered Summary is that entries may now contain multiple lines, one for each header and standard combination. summary.pl accepts a `--help' option, which details the expected syntax of @standards. If errors are reported, the user is directed to this feature for further information. * manual/Makefile: Generate summary.texi with summary.pl. Force use of the C locale. Update Perl dependency comment. * manual/header.texi: Update reference to summary.awk. * manual/macros.texi: Refer authors to `summary.pl --help'. * manual/summary.awk: Remove file. * manual/summary.pl: New file. Generate summary.texi, and check for @standards-related syntax errors. * manual/argp.texi: Convert header and standards @comments to @standards. * manual/arith.texi: Likewise. * manual/charset.texi: Likewise. * manual/conf.texi: Likewise. * manual/creature.texi: Likewise. * manual/crypt.texi: Likewise. * manual/ctype.texi: Likewise. * manual/debug.texi: Likewise. * manual/errno.texi: Likewise. * manual/filesys.texi: Likewise. * manual/getopt.texi: Likewise. * manual/job.texi: Likewise. * manual/lang.texi: Likewise. * manual/llio.texi: Likewise. * manual/locale.texi: Likewise. * manual/math.texi: Likewise. * manual/memory.texi: Likewise. * manual/message.texi: Likewise. * manual/pattern.texi: Likewise. * manual/pipe.texi: Likewise. * manual/process.texi: Likewise. * manual/resource.texi: Likewise. * manual/search.texi: Likewise. * manual/setjmp.texi: Likewise. * manual/signal.texi: Likewise. * manual/socket.texi: Likewise. * manual/startup.texi: Likewise. * manual/stdio.texi: Likewise. * manual/string.texi: Likewise. * manual/sysinfo.texi: Likewise. * manual/syslog.texi: Likewise. * manual/terminal.texi: Likewise. * manual/threads.texi: Likewise. * manual/time.texi: Likewise. * manual/users.texi: Likewise.
2016-10-06Manual typos: POSIX ThreadsRical Jasan1-1/+1
2016-05-06 Rical Jasan <ricaljasan@pacific.net> * manual/threads.texi: Fix typos in the manual.
2015-11-24Remove CPU set size checking from affinity functions [BZ #19143]Florian Weimer1-2/+0
With current kernel versions, the check does not reliably detect that unavailable CPUs are requested, for these reasons: (1) The kernel will silently ignore non-allowed CPUs, that is, CPUs which are physically present but disallowed for the thread based on system configuration. (2) Similarly, CPU bits which lack an online CPU (possible CPUs) are ignored. (3) The existing probing code assumes that the CPU mask size is a power of two and at least 1024. Neither has it to be a power of two, nor is the minimum possible value 1024, so the value determined is often too large. This means that the CPU set size check in glibc accepts CPU bits beyond the actual hard system limit. (4) Future kernel versions may not even have a fixed CPU set size. After the removal of the probing code, the kernel still returns EINVAL if no CPU in the requested set remains which can run the thread after the affinity change. Applications which care about the exact affinity mask will have to query it using sched_getaffinity after setting it. Due to the effects described above, this commit does not change this. The new tests supersede tst-getcpu, which is removed. This addresses bug 19164 because the new tests allocate CPU sets dynamically. * nptl/check-cpuset.h: Remove. * nptl/pthread_attr_setaffinity.c (__pthread_attr_setaffinity_new): Remove CPU set size check. * nptl/pthread_setattr_default_np.c (pthread_setattr_default_np): Likewise. * sysdeps/unix/sysv/linux/check-cpuset.h: Remove. * sysdeps/unix/sysv/linux/pthread_setaffinity.c (__kernel_cpumask_size, __determine_cpumask_size): Remove. (__pthread_setaffinity_new): Remove CPU set size check. * sysdeps/unix/sysv/linux/sched_setaffinity.c (__kernel_cpumask_size): Remove. (__sched_setaffinity_new): Remove CPU set size check. * manual/threads.texi (Default Thread Attributes): Remove stale reference to check_cpuset_attr, determine_cpumask_size in comment. * sysdeps/unix/sysv/linux/Makefile [$(subdir) == posix] (tests): Remove tst-getcpu. Add tst-affinity, tst-affinity-pid. [$(subdir) == nptl] (tests): Add tst-thread-affinity-pthread, tst-thread-affinity-pthread2, tst-thread-affinity-sched. * sysdeps/unix/sysv/linux/tst-affinity.c: New file. * sysdeps/unix/sysv/linux/tst-affinity-pid.c: New file. * sysdeps/unix/sysv/linux/tst-skeleton-affinity.c: New skeleton test file. * sysdeps/unix/sysv/linux/tst-thread-affinity-sched.c: New file. * sysdeps/unix/sysv/linux/tst-thread-affinity-pthread.c: New file. * sysdeps/unix/sysv/linux/tst-thread-affinity-pthread2.c: New file. * sysdeps/unix/sysv/linux/tst-thread-skeleton-affinity.c: New skeleton test file. * sysdeps/unix/sysv/linux/tst-getcpu.c: Remove. Superseded by tst-affinity-pid.
2014-02-28Add header and standard information to threads.texi.Carlos O'Donell1-0/+12
The glibc manual uses special annotations to include functions in the summary chapter. These annotations were missing from the functions in the threads chapter. This patch adds those special markers and in turn adds these functions to the summary chapter.
2014-02-03* manual/threads.texi (pthread_key_create, pthread_key_delete,Alexandre Oliva1-8/+28
pthread_getspecific, pthread_setspecific): Format with @deftypefun, and add @safety note. * manual/signal.texi: Move comments that analyze the above functions to their home place.
2014-02-01* manual/threads.texi: Document MTASC-safety properties.Alexandre Oliva1-0/+138
2013-10-04Fix typo in manualSiddhesh Poyarekar1-1/+1
2013-09-23manual: Fix a typo in `POSIX Threads' sectionMaciej W. Rozycki1-1/+1
2013-09-20Add first set of memory probes.Alexandre Oliva1-1/+1
for ChangeLog * malloc/malloc.c: Include stap-probe.h. (__libc_mallopt): Add memory_mallopt probe. * malloc/arena.c (_int_new_arena): Add memory_arena_new probe. * manual/probes.texi: New. * manual/Makefile (chapters): Add probes. * manual/threads.texi: Set next node.
2013-06-15Add documentation for default pthread attribute functionsSiddhesh Poyarekar1-0/+40
2013-03-19Rename nptl.texi to threads.texiSiddhesh Poyarekar1-0/+44
The manual and its file names are about interfaces and not the implementation details.
generated by cgit v1.1 at 2024-11-20 12:38:48 +0000