aboutsummaryrefslogtreecommitdiff
path: root/libio
AgeCommit message (Collapse)AuthorFilesLines
2015-02-25Fix minor formatting violation.Paul Pluzhnikov1-2/+2
2015-02-24Fix BZ #17916 - fopen unbounded stack usage for ccs= modesPaul Pluzhnikov2-2/+39
2015-02-22Fix BZ #17269 -- _IO_wstr_overflow integer overflowPaul Pluzhnikov1-1/+7
2015-02-22Adjust timeouts for some tests, to accommodate slow processors,Chung-Lin Tang1-0/+1
often without FPUs.
2015-02-17Cleanup: add missing #include'sPaul Pluzhnikov2-1/+2
* libio/fileops.c: Add missing sys/mman.h * libio/iopopen.c: Add missing fcntl.h, remove redundant unistd.h
2015-02-06Fix libio/tst-atime not to presume ST_NOATIME exists.Roland McGrath1-3/+2
2015-01-02Update copyright dates with scripts/update-copyrights.Joseph Myers157-157/+157
2014-12-30Replace %ld with %jd and cast to intmax_tH.J. Lu1-6/+6
2014-12-17Get rid of format warning in tst-widetext.c.Stefan Liebler1-1/+1
2014-12-16Modify libio/tst-fopenloc.c to use test-skeleton.cArjun Shankar1-2/+5
This test would earlier fail when run under test-skeleton.c due to bug #17522 in 'fputws'. That bug is now fixed and so this test may be modified.
2014-12-10Fix tst-ftell-active-handler.c warning.Joseph Myers1-1/+1
A recent change to libio/tst-ftell-active-handler.c (postdating my last check for warnings on x86) introduced a format warning from a long int variable used with a %zu format. This patch fixes it by using %ld for the format to match the variable. Tested for x86. * libio/tst-ftell-active-handler.c (do_ftruncate_test): Use %ld format for long int variable.
2014-12-08libio: Fix variable aligment in tst-ftell-active-handlerAdhemerval Zanella1-4/+1
This patch fixes a stack allocated variable to force it to have wchar_t alignment.
2014-12-05libio: Fix buffer overrun in tst-ftell-active-handlerAdhemerval Zanella1-2/+5
On 'do_ftell_test' the code: 365 if (test_modes[i].fd_mode != O_WRONLY) 366 { 367 char tmpbuf[data_len]; 368 369 rewind (fp); 370 371 while (fgets_func (tmpbuf, sizeof (tmpbuf), fp) && !feof (fp)); The 'data_len' is calculated with wsclen and allocated as 'char'. The subsequent fgetws will then try to write at most 'data_len' wchar_t in a buffer with just data_len 'char'. This patch fixes it by allocating the tmpbuf using 'wchar_t' * data_len bytes.
2014-12-04Fix up function definition styleSiddhesh Poyarekar3-121/+36
Don't use K&R style for function definitions.
2014-12-04Reset cached offset when reading to end of stream (BZ #17653)Siddhesh Poyarekar3-10/+57
POSIX allows applications to switch file handles when a read results in an end of file. Unset the cached offset at this point so that it is queried again.
2014-12-04tst-ftell-active-handler: Open file with O_TRUNC for w modesSiddhesh Poyarekar1-8/+8
The test case fails to truncate the file when a file is intended to be opened in w or w+ mode. Add O_TRUNC to fix this. The test still succeeds with this change.
2014-12-04ftell: seek to end only when there are unflushed bytes (BZ #17647)Siddhesh Poyarekar3-9/+97
Currently we seek to end of file if there are unflushed writes or the stream is in write mode, to get the current offset for writing in append mode, which is the end of file. The latter case (i.e. stream is in write mode, but no unflushed writes) is unnecessary since it will only happen when the stream has just been flushed, in which case the recorded offset ought to be reliable. Removing that case lets ftell give the correct offset when it follows an ftruncate. The latter truncates the file, but does not change the file position, due to which it is permissible to call ftell without an intervening fseek call. Tested on x86_64 to verify that the added test case fails without the patch and succeeds with it, and that there are no additional regressions due to it. [BZ #17647] * libio/fileops.c (do_ftell): Seek only when there are unflushed writes. * libio/wfileops.c (do_ftell_wide): Likewise. * libio/tst-ftell-active-handler.c (do_ftruncate_test): New test case. (do_one_test): Call it.
2014-11-27Fix libio/bug-ungetwc1.c warning.Joseph Myers1-2/+19
This patch fixes a warning "variable 'wc' set but not used" in libio/bug-ungetwc1.c. The test didn't verify much about the results of the functions it called. This patch makes it check the result of getwc (thereby fixing the warning), check end of file does not arrive too late in the getwc loop, and check EOF is no longer set after ungetwc. Tested for x86_64. * libio/bug-ungetwc1.c (do_test): Verify results of getwc and feof.
2014-11-26Fix warnings in fwscanf / rewind tests.Joseph Myers2-0/+15
This patch fixes "set but not used" warnings in the tests libio/bug-rewind.c and libio/bug-rewind2.c by checking the return values from fwscanf and making the tests fail if those values aren't as expected. Tested for x86_64. * libio/bug-rewind.c (do_test): Check fwscanf return values. * libio/bug-rewind2.c (do_test): Likewise.
2014-11-24Remove NOT_IN_libcSiddhesh Poyarekar1-1/+1
Replace with !IS_IN (libc). This completes the transition from the IS_IN/NOT_IN macros to the IN_MODULE macro set. The generated code is unchanged on x86_64. * stdlib/isomac.c (fmt): Replace NOT_IN_libc with IN_MODULE. (get_null_defines): Adjust. * sunrpc/Makefile: Adjust comment. * Makerules (CPPFLAGS-nonlib): Remove NOT_IN_libc. * elf/Makefile (CPPFLAGS-sotruss-lib): Likewise. (CFLAGS-interp.c): Likewise. (CFLAGS-ldconfig.c): Likewise. (CPPFLAGS-.os): Likewise. * elf/rtld-Rules (rtld-CPPFLAGS): Likewise. * extra-lib.mk (CPPFLAGS-$(lib)): Likewise. * extra-modules.mk (extra-modules.mk): Likewise. * iconv/Makefile (CPPFLAGS-iconvprogs): Likewise. * locale/Makefile (CPPFLAGS-locale_programs): Likewise. * malloc/Makefile (CPPFLAGS-memusagestat): Likewise. * nscd/Makefile (CPPFLAGS-nscd): Likewise. * nss/Makefile (CPPFLAGS-nss_test1): Likewise. * stdlib/Makefile (CFLAGS-tst-putenvmod.c): Likewise. * sysdeps/gnu/Makefile ($(objpfx)errlist-compat.c): Likewise. * sysdeps/unix/sysv/linux/Makefile (CPPFLAGS-lddlibc4): Likewise. * iconvdata/Makefile (CPPFLAGS): Likewise. (cpp-srcs-left): Add libof for all iconvdata routines. * bits/stdio-lock.h: Replace NOT_IN_libc with IS_IN. * include/assert.h: Likewise. * include/ctype.h: Likewise. * include/errno.h: Likewise. * include/libc-symbols.h: Likewise. * include/math.h: Likewise. * include/netdb.h: Likewise. * include/resolv.h: Likewise. * include/stdio.h: Likewise. * include/stdlib.h: Likewise. * include/string.h: Likewise. * include/sys/stat.h: Likewise. * include/wctype.h: Likewise. * intl/l10nflist.c: Likewise. * libidn/idn-stub.c: Likewise. * libio/libioP.h: Likewise. * nptl/libc_multiple_threads.c: Likewise. * nptl/pthreadP.h: Likewise. * posix/regex_internal.h: Likewise. * resolv/res_hconf.c: Likewise. * sysdeps/arm/armv7/multiarch/memcpy.S: Likewise. * sysdeps/arm/memmove.S: Likewise. * sysdeps/arm/sysdep.h: Likewise. * sysdeps/generic/_itoa.h: Likewise. * sysdeps/generic/symbol-hacks.h: Likewise. * sysdeps/gnu/errlist.awk: Likewise. * sysdeps/gnu/errlist.c: Likewise. * sysdeps/i386/i586/memcpy.S: Likewise. * sysdeps/i386/i586/memset.S: Likewise. * sysdeps/i386/i686/memcpy.S: Likewise. * sysdeps/i386/i686/memmove.S: Likewise. * sysdeps/i386/i686/mempcpy.S: Likewise. * sysdeps/i386/i686/memset.S: Likewise. * sysdeps/i386/i686/multiarch/bcopy.S: Likewise. * sysdeps/i386/i686/multiarch/bzero.S: Likewise. * sysdeps/i386/i686/multiarch/memchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/memchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/memchr.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp-sse4.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/memcmp.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3-rep.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy.S: Likewise. * sysdeps/i386/i686/multiarch/memcpy_chk.S: Likewise. * sysdeps/i386/i686/multiarch/memmove.S: Likewise. * sysdeps/i386/i686/multiarch/memmove_chk.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy.S: Likewise. * sysdeps/i386/i686/multiarch/mempcpy_chk.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr-c.c: Likewise. * sysdeps/i386/i686/multiarch/memrchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/memrchr.S: Likewise. * sysdeps/i386/i686/multiarch/memset-sse2-rep.S: Likewise. * sysdeps/i386/i686/multiarch/memset-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/memset.S: Likewise. * sysdeps/i386/i686/multiarch/memset_chk.S: Likewise. * sysdeps/i386/i686/multiarch/rawmemchr.S: Likewise. * sysdeps/i386/i686/multiarch/strcat-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strcat-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/strcat.S: Likewise. * sysdeps/i386/i686/multiarch/strchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/strchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strchr.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp-sse4.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/strcmp.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/strcpy.S: Likewise. * sysdeps/i386/i686/multiarch/strcspn.S: Likewise. * sysdeps/i386/i686/multiarch/strlen-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/strlen-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strlen.S: Likewise. * sysdeps/i386/i686/multiarch/strnlen.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr-sse2-bsf.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/strrchr.S: Likewise. * sysdeps/i386/i686/multiarch/strspn.S: Likewise. * sysdeps/i386/i686/multiarch/wcschr-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcschr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcschr.S: Likewise. * sysdeps/i386/i686/multiarch/wcscmp-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcscmp.S: Likewise. * sysdeps/i386/i686/multiarch/wcscpy-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcscpy-ssse3.S: Likewise. * sysdeps/i386/i686/multiarch/wcscpy.S: Likewise. * sysdeps/i386/i686/multiarch/wcslen-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcslen-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcslen.S: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr-c.c: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr-sse2.S: Likewise. * sysdeps/i386/i686/multiarch/wcsrchr.S: Likewise. * sysdeps/i386/i686/multiarch/wmemcmp-c.c: Likewise. * sysdeps/i386/i686/multiarch/wmemcmp.S: Likewise. * sysdeps/ia64/fpu/libm-symbols.h: Likewise. * sysdeps/nptl/bits/libc-lock.h: Likewise. * sysdeps/nptl/bits/libc-lockP.h: Likewise. * sysdeps/nptl/bits/stdio-lock.h: Likewise. * sysdeps/posix/closedir.c: Likewise. * sysdeps/posix/opendir.c: Likewise. * sysdeps/posix/readdir.c: Likewise. * sysdeps/posix/rewinddir.c: Likewise. * sysdeps/powerpc/novmx-sigjmp.c: Likewise. * sysdeps/powerpc/powerpc32/__longjmp.S: Likewise. * sysdeps/powerpc/powerpc32/bsd-_setjmp.S: Likewise. * sysdeps/powerpc/powerpc32/fpu/__longjmp.S: Likewise. * sysdeps/powerpc/powerpc32/fpu/setjmp.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/bzero.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcmp-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcpy-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memcpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memmove.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/mempcpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memrchr-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memrchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memset-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/memset.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/rawmemchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strcasecmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strcasecmp_l.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strchrnul.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strlen-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strlen.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncase.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncase_l.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncmp-ppc32.S: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strncmp.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/strnlen.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcschr-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcschr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcscpy.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr-ppc32.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wcsrchr.c: Likewise. * sysdeps/powerpc/powerpc32/power4/multiarch/wordcopy.c: Likewise. * sysdeps/powerpc/powerpc32/power6/memset.S: Likewise. * sysdeps/powerpc/powerpc32/setjmp.S: Likewise. * sysdeps/powerpc/powerpc64/__longjmp.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/bzero.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcmp-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memmove-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memmove.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/mempcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/memset.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/rawmemchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/stpncpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcasecmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcasecmp_l.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcat.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strchrnul.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strcspn.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strlen-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strlen.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncase.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncase_l.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncat.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp-ppc64.S: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncmp.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strncpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strnlen.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strpbrk.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strrchr-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strspn-ppc64.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/strspn.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcschr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcscpy.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wcsrchr.c: Likewise. * sysdeps/powerpc/powerpc64/multiarch/wordcopy.c: Likewise. * sysdeps/powerpc/powerpc64/setjmp.S: Likewise. * sysdeps/s390/s390-32/multiarch/ifunc-resolve.c: Likewise. * sysdeps/s390/s390-32/multiarch/memcmp.S: Likewise. * sysdeps/s390/s390-32/multiarch/memcpy.S: Likewise. * sysdeps/s390/s390-32/multiarch/memset.S: Likewise. * sysdeps/s390/s390-64/multiarch/ifunc-resolve.c: Likewise. * sysdeps/s390/s390-64/multiarch/memcmp.S: Likewise. * sysdeps/s390/s390-64/multiarch/memcpy.S: Likewise. * sysdeps/s390/s390-64/multiarch/memset.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-niagara1.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-niagara2.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-niagara4.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memcpy.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memset-niagara1.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memset-niagara4.S: Likewise. * sysdeps/sparc/sparc64/multiarch/memset.S: Likewise. * sysdeps/unix/alpha/sysdep.S: Likewise. * sysdeps/unix/alpha/sysdep.h: Likewise. * sysdeps/unix/make-syscalls.sh: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/alpha/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/alpha/vfork.S: Likewise. * sysdeps/unix/sysv/linux/arm/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/arm/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/getpid.c: Likewise. * sysdeps/unix/sysv/linux/hppa/nptl/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/hppa/nptl/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/i386/i486/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/i386/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/i386/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/i386/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/ia64/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep.S: Likewise. * sysdeps/unix/sysv/linux/ia64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/lowlevellock-futex.h: Likewise. * sysdeps/unix/sysv/linux/m68k/bits/m68k-vdso.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/mips/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/not-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/longjmp_chk.c: Likewise. * sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/vfork.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.S: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sh/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/sh/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/sh/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sh/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/sh/vfork.S: Likewise. * sysdeps/unix/sysv/linux/sparc/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/brk.S: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/tile/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/tile/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/tile/waitpid.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/lowlevellock.S: Likewise. * sysdeps/unix/sysv/linux/x86_64/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep-cancel.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep.h: Likewise. * sysdeps/wordsize-32/symbol-hacks.h: Likewise. * sysdeps/x86_64/memcpy.S: Likewise. * sysdeps/x86_64/memmove.c: Likewise. * sysdeps/x86_64/memset.S: Likewise. * sysdeps/x86_64/multiarch/init-arch.h: Likewise. * sysdeps/x86_64/multiarch/memcmp-sse4.S: Likewise. * sysdeps/x86_64/multiarch/memcmp-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/memcmp.S: Likewise. * sysdeps/x86_64/multiarch/memcpy-avx-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/memcpy-ssse3-back.S: Likewise. * sysdeps/x86_64/multiarch/memcpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/memcpy.S: Likewise. * sysdeps/x86_64/multiarch/memcpy_chk.S: Likewise. * sysdeps/x86_64/multiarch/memmove.c: Likewise. * sysdeps/x86_64/multiarch/mempcpy.S: Likewise. * sysdeps/x86_64/multiarch/mempcpy_chk.S: Likewise. * sysdeps/x86_64/multiarch/memset-avx2.S: Likewise. * sysdeps/x86_64/multiarch/memset.S: Likewise. * sysdeps/x86_64/multiarch/memset_chk.S: Likewise. * sysdeps/x86_64/multiarch/strcat-sse2-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/strcat-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/strcat.S: Likewise. * sysdeps/x86_64/multiarch/strchr-sse2-no-bsf.S: Likewise. * sysdeps/x86_64/multiarch/strchr.S: Likewise. * sysdeps/x86_64/multiarch/strcmp-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/strcmp.S: Likewise. * sysdeps/x86_64/multiarch/strcpy-sse2-unaligned.S: Likewise. * sysdeps/x86_64/multiarch/strcpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/strcpy.S: Likewise. * sysdeps/x86_64/multiarch/strcspn.S: Likewise. * sysdeps/x86_64/multiarch/strspn.S: Likewise. * sysdeps/x86_64/multiarch/wcscpy-c.c: Likewise. * sysdeps/x86_64/multiarch/wcscpy-ssse3.S: Likewise. * sysdeps/x86_64/multiarch/wcscpy.S: Likewise. * sysdeps/x86_64/multiarch/wmemcmp-c.c: Likewise. * sysdeps/x86_64/multiarch/wmemcmp.S: Likewise. * sysdeps/x86_64/strcmp.S: Likewise.
2014-11-12Fix __get_nprocs fgets_unlocked namespace (bug 17582).Joseph Myers2-2/+6
__get_nprocs is called from malloc code, but calls fgets_unlocked, which is not an ISO C or POSIX function. This patch fixes it to call a new __fgets_unlocked name instead. Note: there are various other uses of fgets_unlocked in glibc's libraries, and I haven't yet investigated which others might also be problematic (called directly or indirectly from standard functions) and so need to change to use __fgets_unlocked. Tested for x86_64 (testsuite, and that disassembly of installed shared libraries is unchanged by the patch). [BZ #17582] * libio/iofgets.c [weak_alias && !_IO_MTSAFE_IO] (__fgets_unlocked): Add alias of _IO_fgets. Use libc_hidden_def. * libio/iofgets_u.c (fgets_unlocked): Rename to __fgets_unlocked and define as weak alias of __fgets_unlocked. Use libc_hidden_weak. (__fgets_unlocked): Use libc_hidden_def. * include/stdio.h (__fgets_unlocked): Declare. Use libc_hidden_proto. * sysdeps/unix/sysv/linux/getsysstats.c (phys_pages_info): Use __fgets_unlocked instead of fgets_unlocked. * sysdeps/unix/sysv/linux/alpha/getsysstats.c (GET_NPROCS_CONF_PARSER): Likewise. * sysdeps/unix/sysv/linux/sparc/getsysstats.c (GET_NPROCS_CONF_PARSER): Likewise.
2014-11-12Fix tzfile.c namespace (bug 17583).Joseph Myers4-9/+14
tzfile.c is brought in by various ISO C functions, but calls fileno, fread_unlocked and ftello, which are not ISO C functions. This patch adds names __fileno, __fread_unlocked and __ftello for those functions, making tzfile.c use those new names. Note: there are various uses of fileno elsewhere in glibc that I didn't change, although it may turn out that some of those also need to use __fileno. Tested for x86_64 with the glibc testsuite. Changed line numbers in tzfile.c cause changes in assertions, and for some reason this ends up with different instruction choice and register allocation, affecting the size of __tzfile_read and so making comparison of disassembly for libc.so problematic. [BZ #17583] * libio/fileno.c (fileno): Rename to __fileno and define as weak alias of __fileno. Use libc_hidden_weak. (__fileno): Use libc_hidden_def. [weak_alias] (fileno_unlocked): Define as weak alias of __fileno. * libio/ftello.c (ftello): Rename to __ftello and define as weak alias of __ftello. [__OFF_T_MATCHES_OFF64_T] (ftello64): Define as weak alias of __ftello. * libio/iofread.c [weak_alias && !_IO_MTSAFE_IO] (__fread_unlocked): Define as strong alias of _IO_fread. Use libc_hidden_def. (fread_unlocked): Don't use libc_hidden_ver. * libio/iofread_u.c (fread_unlocked): Rename to __fread_unlocked and define as weak alias of __fread_unlocked. Don't use libc_hidden_def. (__fread_unlocked): Use libc_hidden_def. * include/stdio.h (__fileno): Declare. Use libc_hidden_proto. (ftello): Don't use libc_hidden_proto. (__ftello): Declare. Use libc_hidden_proto. (fread_unlocked): Don't use libc_hidden_proto. (__fread_unlocked): Declare. Use libc_hidden_proto. * time/tzfile.c (__tzfile_read): Use __fileno, __fread_unlocked and __ftello instead of fileno, fread_unlocked and ftello.
2014-11-05Modify several tests to use test-skeleton.cArjun Shankar6-12/+30
This patch modifies several test cases to use test-skeleton.c. It was generated by a bash script written for this purpose and thus excludes several other tests which I deemed worth a visual inspection before making the change. I intend to follow up with individual patches to the tests skipped by the script. The script itself resides at http://git.io/WODAmg and should reproduce this very patch when run against master. ChangeLog: 2014-10-30 Arjun Shankar <arjun.is@lostca.se> * catgets/test-gencat.c: Use test-skeleton.c. * catgets/tst-catgets.c: Likewise. * csu/tst-empty.c: Likewise. * elf/tst-audit2.c: Likewise. * elf/tst-global1.c: Likewise. * elf/tst-pathopt.c: Likewise. * elf/tst-piemod1.c: Likewise. * elf/tst-tls10.c: Likewise. * elf/tst-tls11.c: Likewise. * elf/tst-tls12.c: Likewise. * gnulib/tst-gcc.c: Likewise. * iconvdata/tst-e2big.c: Likewise. * iconvdata/tst-loading.c: Likewise. * iconv/tst-iconv1.c: Likewise. * iconv/tst-iconv2.c: Likewise. * inet/test-inet6_opt.c: Likewise. * inet/tst-gethnm.c: Likewise. * inet/tst-network.c: Likewise. * inet/tst-ntoa.c: Likewise. * intl/tst-codeset.c: Likewise. * intl/tst-gettext2.c: Likewise. * intl/tst-gettext3.c: Likewise. * intl/tst-ngettext.c: Likewise. * intl/tst-translit.c: Likewise. * io/test-stat.c: Likewise. * libio/test-fmemopen.c: Likewise. * libio/tst-freopen.c: Likewise. * libio/tst-sscanf.c: Likewise. * libio/tst-ungetwc1.c: Likewise. * libio/tst-ungetwc2.c: Likewise. * libio/tst-widetext.c: Likewise. * localedata/tst-ctype.c: Likewise. * localedata/tst-digits.c: Likewise. * localedata/tst-leaks.c: Likewise. * localedata/tst-mbswcs1.c: Likewise. * localedata/tst-mbswcs2.c: Likewise. * localedata/tst-mbswcs3.c: Likewise. * localedata/tst-mbswcs4.c: Likewise. * localedata/tst-mbswcs5.c: Likewise. * localedata/tst-setlocale.c: Likewise. * localedata/tst-trans.c: Likewise. * localedata/tst-wctype.c: Likewise. * localedata/tst-xlocale1.c: Likewise. * login/tst-grantpt.c: Likewise. * malloc/tst-calloc.c: Likewise. * malloc/tst-malloc.c: Likewise. * malloc/tst-mallocstate.c: Likewise. * malloc/tst-mcheck.c: Likewise. * malloc/tst-mtrace.c: Likewise. * malloc/tst-obstack.c: Likewise. * math/atest-exp2.c: Likewise. * math/atest-exp.c: Likewise. * math/atest-sincos.c: Likewise. * math/test-matherr.c: Likewise. * math/test-misc.c: Likewise. * math/test-powl.c: Likewise. * math/tst-definitions.c: Likewise. * misc/tst-dirname.c: Likewise. * misc/tst-efgcvt.c: Likewise. * misc/tst-fdset.c: Likewise. * misc/tst-hsearch.c: Likewise. * misc/tst-mntent2.c: Likewise. * nptl/tst-sem7.c: Likewise. * nptl/tst-sem8.c: Likewise. * nptl/tst-sem9.c: Likewise. * nss/test-netdb.c: Likewise. * posix/tst-fnmatch.c: Likewise. * posix/tst-getlogin.c: Likewise. * posix/tst-gnuglob.c: Likewise. * posix/tst-mmap.c: Likewise. * pwd/tst-getpw.c: Likewise. * resolv/tst-inet_ntop.c: Likewise. * rt/tst-timer.c: Likewise. * stdio-common/test-fseek.c: Likewise. * stdio-common/test-popen.c: Likewise. * stdio-common/test-vfprintf.c: Likewise. * stdio-common/tst-cookie.c: Likewise. * stdio-common/tst-fileno.c: Likewise. * stdio-common/tst-gets.c: Likewise. * stdio-common/tst-obprintf.c: Likewise. * stdio-common/tst-perror.c: Likewise. * stdio-common/tst-sprintf2.c: Likewise. * stdio-common/tst-sprintf3.c: Likewise. * stdio-common/tst-sprintf.c: Likewise. * stdio-common/tst-swprintf.c: Likewise. * stdio-common/tst-tmpnam.c: Likewise. * stdio-common/tst-unbputc.c: Likewise. * stdio-common/tst-wc-printf.c: Likewise. * stdlib/tst-environ.c: Likewise. * stdlib/tst-fmtmsg.c: Likewise. * stdlib/tst-limits.c: Likewise. * stdlib/tst-rand48-2.c: Likewise. * stdlib/tst-rand48.c: Likewise. * stdlib/tst-random2.c: Likewise. * stdlib/tst-random.c: Likewise. * stdlib/tst-strtol.c: Likewise. * stdlib/tst-strtoll.c: Likewise. * stdlib/tst-tls-atexit.c: Likewise. * stdlib/tst-xpg-basename.c: Likewise. * string/test-ffs.c: Likewise. * string/tst-bswap.c: Likewise. * string/tst-inlcall.c: Likewise. * string/tst-strtok.c: Likewise. * string/tst-strxfrm.c: Likewise. * sysdeps/x86_64/tst-audit10.c: Likewise. * sysdeps/x86_64/tst-audit3.c: Likewise. * sysdeps/x86_64/tst-audit4.c: Likewise. * sysdeps/x86_64/tst-audit5.c: Likewise. * time/tst-ftime_l.c: Likewise. * time/tst-getdate.c: Likewise. * time/tst-mktime3.c: Likewise. * time/tst-mktime.c: Likewise. * time/tst-posixtz.c: Likewise. * time/tst-strptime2.c: Likewise. * time/tst-strptime3.c: Likewise. * wcsmbs/tst-btowc.c: Likewise. * wcsmbs/tst-mbrtowc.c: Likewise. * wcsmbs/tst-mbsrtowcs.c: Likewise. * wcsmbs/tst-wchar-h.c: Likewise. * wcsmbs/tst-wcpncpy.c: Likewise. * wcsmbs/tst-wcrtomb.c: Likewise. * wcsmbs/tst-wcsnlen.c: Likewise. * wcsmbs/tst-wcstof.c: Likewise.
2014-11-03Don't error out writing a multibyte character to an unbuffered stream (bug ↵Andreas Schwab3-6/+60
17522)
2014-09-16Fix memory leak in error path of do_ftell_wide (BZ #17370)Siddhesh Poyarekar1-1/+4
2014-09-16Revert to defining __extern_inline only for gcc-4.3+ (BZ #17266)Siddhesh Poyarekar1-1/+1
The check for only __GNUC_STDC_INLINE__ and __GNUC_GNU_INLINE__ may not be sufficient since those flags were added during initial support for C99 inlining semantics. There is also a problem with always defining __extern_inline and __extern_always_inline, since it enables inline wrapper functions even when GNU inlining semantics are not guaranteed. This, along with the possibility of such wrappers using redirection (btowc for example) could result in compiler generating an infinitely recusrive call to the function. In fact it was such a recursion that led to this code being written the way it was; see: https://bugzilla.redhat.com/show_bug.cgi?id=186410 The initial change was to fix bugs 14530 and 13741, but they can be resolved by checking if __fortify_function and/or __extern_always_inline are defined, as it has been done in this patch. In addition, I have audited uses of __extern_always_inline to make sure that none of the uses result in compilation errors. There is however a regression in this patch for llvm, since it reverts the llvm expectation that __GNUC_STDC_INLINE__ or __GNUC_GNU_INLINE__ definition imply proper extern inline semantics. 2014-09-16 Siddhesh Poyarekar <siddhesh@redhat.com> Jakub Jelinek <jakub@redhat.com> [BZ #17266] * libio/stdio.h: Check definition of __fortify_function instead of __extern_always_inline to include bits/stdio2.h. * math/bits/math-finite.h [__USE_XOPEN || __USE_ISOC99]: Also check if __extern_always_inline is defined. [__USE_MISC || __USE_XOPEN]: Likewise. [__USE_ISOC99] Likewise. * misc/sys/cdefs.h (__fortify_function): Define only if __extern_always_inline is defined. [!__cplusplus || __GNUC_PREREQ (4,3)]: Revert to defining __extern_always_inline and __extern_inline only for g++-4.3 and newer or a compatible gcc.
2014-09-12Complete the removal of __gconv_translit_findFlorian Weimer2-23/+4
Prior to the 2.20 release, the function was just changed to fail unconditionally, in commit a1a6a401ab0a3c9f15fb7eaebbdcee24192254e8. This commit removes the function completely, including gconv bits which depend on it. This changes the gconv ABI, which is not a public interface.
2014-09-11Fix memory leak in libio/wfileops.c do_ftell_wide [BZ #17370]Tim Lammens1-0/+1
2014-06-07Remove redundant C locale settings.Joseph Myers1-1/+0
Various glibc build / install / test code has C locale settings that are redundant with LC_ALL=C. LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C (explicitly, or through it being in the default environment for running tests) does not need to set LANG=C. LC_ALL=C also takes precedence over LANGUAGE, since 2001-01-02 Ulrich Drepper <drepper@redhat.com> * intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE value is ignored if the selected locale is the C locale. * intl/tst-gettext.c: Set locale for above change. * intl/tst-translit.c: Likewise. and so settings of LANGUAGE=C are also redundant when LC_ALL=C is set. One test also had LC_ALL=C in its -ENV setting, although it's part of the default environment used for tests. This patch removes the redundant settings. It removes a suggestion in install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the Makefile.in target "install" already sets LC_ALL_C so there's no need for the user to set it (and nor should there be any need for the user to set it). If some build machine tool used by "make install" uses a version of libintl predating that 2001 change, and the user has LANGUAGE set, the removal of LANGUAGE=C from the Makefile.in "install" rule could in principle affect the user's installation. However, I don't think we need to be concerned about pre-2001 build tools. Tested x86_64. * Makefile (install): Don't set LANGUAGE. * Makefile.in (install): Likewise. * assert/Makefile (test-assert-ENV): Remove variable. (test-assert-perr-ENV): Likewise. * elf/Makefile (neededtest4-ENV): Likewise. * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * io/ftwtest-sh (LANG): Remove variable. * libio/Makefile (tst-widetext-ENV): Likewise. * manual/install.texi (Running make install): Don't refer to environment settings for make install. * INSTALL: Regenerated. * nptl/tst-tls6.sh: Don't set LANG. * posix/globtest.sh (LANG): Remove variable. * string/Makefile (tester-ENV): Likewise. (inl-tester-ENV): Likewise. (noinl-tester-ENV): Likewise. * sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * timezone/Makefile (build-testdata): Use $(built-program-cmd) without explicit environment settings. localedata/ChangeLog: * tst-fmon.sh: Don't set LANGUAGE. * tst-locale.sh: Likewise.
2014-06-04Include LOCPATH in default test environment.Joseph Myers1-14/+2
Tests run using the default $(make-test-out) automatically get GCONV_PATH and LC_ALL set, whether or not those environment variables are actually needed for the individual test. However, they do not get LOCPATH set, meaning that a large number of tests have -ENV settings just to set LOCPATH. This patch moves LOCPATH into the default environment used for all tests, on the principle that like GCONV_PATH any settings needed to use files associated with the newly built library, rather than any old installed files, are appropriate to use by default. A further motivation is that various tests using .sh files also set some combination of LC_ALL, GCONV_PATH and LOCPATH. Preferably .sh files should also use the default environment with any additions required for the individual test. Now, it was suggested in <https://sourceware.org/ml/libc-alpha/2014-05/msg00715.html> that various Makefile variables used in testing should be derived by composing the -before-env and -after-env variables used when explicit environment settings are required. With such a change, it's also natural for those variables to include the default settings (via some intermediate makefile variable also used in make-test-out). Because some .sh files only set variables that correspond to the default settings, or a subset thereof, and this applies to more of the .sh files once LOCPATH is in the default settings, doing so reduces the size of a revised version of <https://sourceware.org/ml/libc-alpha/2014-05/msg00596.html>: scripts only needing the (expanded) default settings will not need to receive the separate -before-env and -after-env variables, only the single variable they do at present. So moving LOCPATH into the default settings can reduce churn caused by subsequent patches. Tested x86_64 and x86. * Rules (make-test-out): Include LOCPATH=$(common-objpfx)localedata in default environment. * debug/Makefile (tst-chk1-ENV): Remove variable. (tst-chk2-ENV): Likewise. (tst-chk3-ENV): Likewise. (tst-chk4-ENV): Likewise. (tst-chk5-ENV): Likewise. (tst-chk6-ENV): Likewise. (tst-lfschk1-ENV): Likewise. (tst-lfschk2-ENV): Likewise. (tst-lfschk3-ENV): Likewise. (tst-lfschk4-ENV): Likewise. (tst-lfschk5-ENV): Likewise. (tst-lfschk6-ENV): Likewise. * iconvdata/Makefile (bug-iconv6-ENV): Likewise. (tst-iconv7-ENV): Likewise. * intl/Makefile (LOCPATH-ENV): Likewise. (tst-codeset-ENV): Likewise. (tst-gettext3-ENV): Likewise. (tst-gettext5-ENV): Likewise. * libio/Makefile (tst-widetext-ENV): Don't set LOCPATH. (tst-fopenloc-ENV): Likewise. (tst-fgetws-ENV): Remove variable. (tst-ungetwc1-ENV): Likewise. (tst-ungetwc2-ENV): Likewise. (bug-ungetwc2-ENV): Likewise. (tst-swscanf-ENV): Likewise. (bug-ftell-ENV): Likewise. (tst-fgetwc-ENV): Likewise. (tst-fseek-ENV): Likewise. (tst-ftell-partial-wide-ENV): Likewise. (tst-ftell-active-handler-ENV): Likewise. (tst-ftell-append-ENV): Likewise. * posix/Makefile (tst-fnmatch-ENV): Likewise. (tst-regexloc-ENV): Likewise. (bug-regex1-ENV): Likewise. (tst-regex-ENV): Likewise. (tst-regex2-ENV): Likewise. (bug-regex5-ENV): Likewise. (bug-regex6-ENV): Likewise. (bug-regex17-ENV): Likewise. (bug-regex18-ENV): Likewise. (bug-regex19-ENV): Likewise. (bug-regex20-ENV): Likewise. (bug-regex22-ENV): Likewise. (bug-regex23-ENV): Likewise. (bug-regex25-ENV): Likewise. (bug-regex26-ENV): Likewise. (bug-regex30-ENV): Likewise. (bug-regex32-ENV): Likewise. (bug-regex33-ENV): Likewise. (bug-regex34-ENV): Likewise. (bug-regex35-ENV): Likewise. (tst-rxspencer-ENV): Likewise. (tst-rxspencer-no-utf8-ENV): Likewise. * stdio-common/Makefile (tst-sprintf-ENV): Likewise. (tst-sscanf-ENV): Likewise. (tst-swprintf-ENV): Likewise. (tst-swscanf-ENV): Likewise. (test-vfprintf-ENV): Likewise. (scanf13-ENV): Likewise. (bug14-ENV): Likewise. (tst-grouping-ENV): Likewise. * stdlib/Makefile (tst-strtod-ENV): Likewise. (tst-strtod3-ENV): Likewise. (tst-strtod4-ENV): Likewise. (tst-strtod5-ENV): Likewise. (testmb2-ENV): Likewise./ * string/Makefile (tst-strxfrm-ENV): Likewise. (tst-strxfrm2-ENV): Likewise. (bug-strcoll1-ENV): Likewise. (test-strcasecmp-ENV): Likewise. (test-strncasecmp-ENV): Likewise. * time/Makefile (tst-strptime-ENV): Likewise. (tst-ftime_l-ENV): Likewise. * wcsmbs/Makefile (tst-btowc-ENV): Likewise. (tst-mbrtowc-ENV): Likewise. (tst-wcrtomb-ENV): Likewise. (tst-mbrtowc2-ENV): Likewise. (tst-c16c32-1-ENV): Likewise. (tst-mbsnrtowcs-ENV): Likewise. localedata/ChangeLog: * Makefile (TEST_MBWC_ENV): Remove variable. (tst_iswalnum-ENV): Likewise. (tst_iswalpha-ENV): Likewise. (tst_iswcntrl-ENV): Likewise. (tst_iswctype-ENV): Likewise. (tst_iswdigit-ENV): Likewise. (tst_iswgraph-ENV): Likewise. (tst_iswlower-ENV): Likewise. (tst_iswprint-ENV): Likewise. (tst_iswpunct-ENV): Likewise. (tst_iswspace-ENV): Likewise. (tst_iswupper-ENV): Likewise. (tst_iswxdigit-ENV): Likewise. (tst_mblen-ENV): Likewise. (tst_mbrlen-ENV): Likewise. (tst_mbrtowc-ENV): Likewise. (tst_mbsrtowcs-ENV): Likewise. (tst_mbstowcs-ENV): Likewise. (tst_mbtowc-ENV): Likewise. (tst_strcoll-ENV): Likewise. (tst_strfmon-ENV): Likewise. (tst_strxfrm-ENV): Likewise. (tst_swscanf-ENV): Likewise. (tst_towctrans-ENV): Likewise. (tst_towlower-ENV): Likewise. (tst_towupper-ENV): Likewise. (tst_wcrtomb-ENV): Likewise. (tst_wcscat-ENV): Likewise. (tst_wcschr-ENV): Likewise. (tst_wcscmp-ENV): Likewise. (tst_wcscoll-ENV): Likewise. (tst_wcscpy-ENV): Likewise. (tst_wcscspn-ENV): Likewise. (tst_wcslen-ENV): Likewise. (tst_wcsncat-ENV): Likewise. (tst_wcsncmp-ENV): Likewise. (tst_wcsncpy-ENV): Likewise. (tst_wcspbrk-ENV): Likewise. (tst_wcsrtombs-ENV): Likewise. (tst_wcsspn-ENV): Likewise. (tst_wcsstr-ENV): Likewise. (tst_wcstod-ENV): Likewise. (tst_wcstok-ENV): Likewise. (tst_wcstombs-ENV): Likewise. (tst_wcswidth-ENV): Likewise. (tst_wcsxfrm-ENV): Likewise. (tst_wctob-ENV): Likewise. (tst_wctomb-ENV): Likewise. (tst_wctrans-ENV): Likewise. (tst_wctype-ENV): Likewise. (tst_wcwidth-ENV): Likewise. (tst-digits-ENV): Likewise. (tst-mbswcs6-ENV): Likewise. (tst-xlocale1-ENV): Likewise. (tst-xlocale2-ENV): Likewise. (tst-strfmon1-ENV): Likewise. (tst-strptime-ENV): Likewise. (tst-setlocale-ENV): Don't set LOCPATH. (bug-iconv-trans-ENV): Remove variable. (tst-sscanf-ENV): Likewise. (tst-leaks-ENV): Don't set LOCPATH. (bug-setlocale1-ENV): Remove variable. (bug-setlocale1-static-ENV): Likewise. (tst-setlocale2-ENV): Likewise.
2014-05-27Fix offset computation for append+ mode on switching from read (BZ #16724)Siddhesh Poyarekar4-5/+193
The offset computation in write mode uses the fact that _IO_read_end is kept in sync with the external file offset. This however is not true when O_APPEND is in effect since switching to write mode ought to send the external file offset to the end of file without making the necessary adjustment to _IO_read_end. Hence in append mode, offset computation when writing should only consider the effect of unflushed writes, i.e. from _IO_write_base to _IO_write_ptr. The wiki has a detailed document that describes the rationale for offsets returned by ftell in various conditions: https://sourceware.org/glibc/wiki/File%20offsets%20in%20a%20stdio%20stream%20and%20ftell
2014-05-01Fix -Wundef warnings for _IO_JUMPS_OFFSET.Roland McGrath1-0/+2
2014-03-25Setup LOCPATH for tst-ftell-active-handler and tst-ftell-partial-wide in libioAndreas Schwab1-0/+2
2014-03-17Revert "Fix _IO_JUMPS_OFFSET -Wundef warnings"Will Newton2-2/+2
This reverts commit f7efd7c3dfffa3c417e9d3c4cb19d9954a3b1421.
2014-03-17Fix _IO_JUMPS_OFFSET -Wundef warningsWill Newton2-2/+2
ChangeLog: 2014-03-17 Will Newton <will.newton@linaro.org> * libio/genops.c: Check whether _IO_JUMPS_OFFSET is defined with #ifdef rather than #if. * libio/libioP.h: Likewise. * stdio-common/vfprintf.c: Likewise.
2014-03-17Change offset in fdopen only if setting O_APPENDSiddhesh Poyarekar2-4/+66
fdopen should only be allowed to change the offset in the file it attaches to if it is setting O_APPEND. If O_APPEND is already set, it should not change the state of the handle.
2014-03-17Fix offset caching for streams and use it for ftell (BZ #16680)Siddhesh Poyarekar4-92/+178
The ftell implementation was made conservative to ensure that incorrectly cached offsets never affect it. However, this causes problems for append mode when a file stream is rewound. Additionally, the 'clever' trick of using stat to get position for append mode files caused more problems than it solved and broke old behavior. I have described the various problems that it caused and then finally the solution. For a and a+ mode files, rewinding the stream should result in ftell returning 0 as the offset, but the stat() trick caused it to (incorrectly) always return the end of file. Now I couldn't find anything in POSIX that specifies the stream position after rewind() for a file opened in 'a' mode, but for 'a+' mode it should be set to 0. For 'a' mode too, it probably makes sense to keep it set to 0 in the interest of retaining old behavior. The initial file position for append mode files is implementation defined, so the implementation could either retain the current file position or move the position to the end of file. The earlier ftell implementation would move the offset to end of file for append-only mode, but retain the old offset for a+ mode. It would also cache the offset (this detail is important). My patch broke this and would set the initial position to end of file for both append modes, thus breaking old behavior. I was ignorant enough to write an incorrect test case for it too. The Change: I have now brought back the behavior of seeking to end of file for append-only streams, but with a slight difference. I don't cache the offset though, since we would want ftell to query the current file position through lseek while the stream is not active. Since the offset is moved to the end of file, we can rely on the file position reported by lseek and we don't need to resort to the stat() nonsense. Finally, the cache is always reliable, except when there are unflished writes in an append mode stream (i.e. both a and a+). In the latter case, it is safe to just do an lseek to SEEK_END. The value can be safely cached too, since the file handle is already active at this point. Incidentally, this is the only state change we affect in the file handle (apart from taking locks of course). I have also updated the test case to correct my impression of the initial file position for a+ streams to the initial behavior. I have verified that this does not break any existing tests in the testsuite and also passes with the new tests.
2014-03-17Fix up return codes for tests in tst-ftell-active-handlerSiddhesh Poyarekar1-18/+31
The test functions used a variable ret to store failure codes for individual tests, but the variable was incorrectly used to record other failure codes too, resulting in overwriting of the tests status. This is now fixed by making sure that the ret variable is used only for recording test failures. * libio/tst-ftell-active-handler.c (do_ftell_test): Don't mix up test status with function return status. (do_write_test): Likewise. (do_append_test): Likewise.
2014-03-06Enumerate tests with special rules in tests-special variable.Joseph Myers1-4/+4
This patch is a revised and updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html>. In order to generate overall summaries of the results of all tests in the glibc testsuite, we need to identify and concatenate the files with the results of individual tests. Tomas Dohnalek's patch used $(common-objpfx)*/*.test-result for this. However, the normal glibc approach is explicit enumeration of the expected set of files with a given property, rather than all files matching some pattern like that. Furthermore, we would like to be able to mark tests as UNRESOLVED if the file with their results is for some reason missing, and in future we would like to be able to mark tests as UNSUPPORTED if they are disabled for a particular configuration (rather than simply having them missing from the list of tests as at present). Such handling of tests that were not run or did not record results requires an explicit enumeration of tests. For the tests following the default makefile rules, $(tests) (and $(xtests)) provides such an enumeration. Others, however, are added directly as dependencies of the "tests" and "xtests" makefile targets. This patch changes the makefiles to put them in variables tests-special and xtests-special, with appropriate dependencies on the tests listed there then being added centrally. Those variables are used in Rules and so need to be set before Rules is included in a subdirectory makefile, which is often earlier in the makefile than the dependencies were present before. We previously discussed the question of where to include Rules; see the question at <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, and a discussion in <https://sourceware.org/ml/libc-alpha/2013-01/msg00337.html> of why Rules is included early rather than late in subdirectory makefiles. It was necessary to avoid an indirection through the check-abi target and get the check-abi-* targets for individual libraries into the tests-special variable. The intl/ test $(objpfx)tst-gettext.out, previously built only because of dependencies from other tests, was also added to tests-special for the same reason. The entries in tests-special are the full makefile targets, complete with $(objpfx) and .out. If a future change causes tests to be named consistently with a .out suffix, this can be changed to include just the path relative to $(objpfx), without .out. Tested x86_64, including that the same set of files is generated in the build directory by a build and testsuite run both before and after the patch (except for changes to the elf/tst-null-argv.debug.out.<number> file name), and a build with run-built-tests=no to verify there aren't any more obvious instances of the issue Marcus Shawcroft reported with a previous version in <https://sourceware.org/ml/libc-alpha/2014-01/msg00462.html>. * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (tests): Depend on $(tests-special). * Makerules (check-abi-list): New variable. (check-abi): Depend on $(check-abi-list). [$(subdir) = elf] (tests-special): Add $(objpfx)check-abi-libc.out. [$(build-shared) = yes && subdir] (tests-special): Add $(check-abi-list). [$(build-shared) = yes && subdir] (tests): Do not depend on check-abi. * Rules (tests): Depend on $(tests-special). (xtests): Depend on $(xtests-special). * catgets/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * conform/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * elf/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * grp/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * iconv/Makefile (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * iconvdata/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * intl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. Also add $(objpfx)tst-gettext.out. * io/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * libio/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * malloc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * misc/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * nptl_db/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * posix/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * resolv/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (xtests): Change dependencies to .... (xtests-special): ... additions to this variable. * stdio-common/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. * stdlib/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * string/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. * sysdeps/x86/Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable. localedata: * Makefile (tests): Change dependencies to .... (tests-special): ... additions to this variable.
2014-03-04Fix up formatting in tst-ftell-active-handler.cSiddhesh Poyarekar1-7/+7
2014-03-04Fix up formattingSiddhesh Poyarekar1-2/+2
2014-03-04Use cached offset in ftell when reliableSiddhesh Poyarekar4-23/+58
The cached offset is reliable to use in ftell when the stream handle is active. We can consider a stream as being active when there is unflushed data. However, even in this case, we can use the cached offset only when the stream is not being written to in a+ mode, because this case may have unflushed data and a stale offset; the previous read could have sent it off somewhere other than the end of the file. There were a couple of adjustments necessary to get this to work. Firstly, fdopen now ceases to use _IO_attach_fd because it sets the offset cache to the current file position. This is not correct because there could be changes to the file descriptor before the stream handle is activated, which would not get reflected. A similar offset caching action is done in _IO_fwide, claiming that wide streams have 'problems' with the file offsets. There don't seem to be any obvious problems with not having the offset cache available, other than that it will have to be queried in a subsequent read/write/seek. I have removed this as well. The testsuite passes successfully with these changes on x86_64.
2014-03-04Separate ftell from fseek logic and avoid modifying FILE data (#16532)Siddhesh Poyarekar5-133/+588
ftell semantics are distinct from fseek(SEEK_CUR) especially when it is called on a file handler that is not yet active. Due to this caveat, much care needs to be taken while modifying the handler data and hence, this first iteration on separating out ftell focusses on maintaining handler data integrity at all times while it figures out the current stream offset. The result is that it makes a syscall for every offset request. There is scope for optimizing this by caching offsets when we know that the handler is active. A simple way to find out is when the buffers have data. It is not so simple to find this out when the buffer is empty without adding some kind of flag.
2014-02-28Fix fallout from Joseph's untested Makeconfig change.Roland McGrath1-1/+1
2014-02-26Consistently include Makeconfig after defining subdir.Joseph Myers1-4/+2
In <https://sourceware.org/ml/libc-alpha/2014-01/msg00196.html> I noted it was necessary to add includes of Makeconfig early in various subdirectory makefiles for the tests-special variable settings added by that patch to be conditional on configuration information. No-one commented on the general question there of whether Makeconfig should always be included immediately after the definition of subdir. This patch implements that early inclusion of Makeconfig in each directory (which is a lot easier than consistent placement of includes of Rules). Includes are added if needed, or moved up if already present. Subdirectory "all:" targets are removed, since Makeconfig provides one. There is potential for further cleanups I haven't done. Rules and Makerules have code such as ifneq "$(findstring env,$(origin headers))" "" headers := endif to override to empty any value of various variables that came from the environment. I think there is a case for Makeconfig setting all the subdirectory variables (other than subdir) to empty to ensure no outside value is going to take effect if a subdirectory fails to define a variable. (A list of such variables, possibly out of date and incomplete, is in manual/maint.texi.) Rules and Makerules would give errors if Makeconfig hadn't already been included, instead of including it themselves. The special code to override values coming from the environment would then be obsolete and could be removed. Tested x86_64, including that installed binaries are identical before and after the patch. * argp/Makefile: Include Makeconfig immediately after defining subdir. * assert/Makefile: Likewise. * benchtests/Makefile: Likewise. * catgets/Makefile: Likewise. * conform/Makefile: Likewise. * crypt/Makefile: Likewise. * csu/Makefile: Likewise. (all): Remove target. * ctype/Makefile: Include Makeconfig immediately after defining subdir. * debug/Makefile: Likewise. * dirent/Makefile: Likewise. * dlfcn/Makefile: Likewise. * gmon/Makefile: Likewise. * gnulib/Makefile: Likewise. * grp/Makefile: Likewise. * gshadow/Makefile: Likewise. * hesiod/Makefile: Likewise. * hurd/Makefile: Likewise. (all): Remove target. * iconvdata/Makefile: Include Makeconfig immediately after defining subdir. * inet/Makefile: Likewise. * intl/Makefile: Likewise. * io/Makefile: Likewise. * libio/Makefile: Likewise. (all): Remove target. * locale/Makefile: Include Makeconfig immediately after defining subdir. * login/Makefile: Likewise. * mach/Makefile: Likewise. (all): Remove target. * malloc/Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. * manual/Makefile: Include Makeconfig immediately after defining subdir. * math/Makefile: Likewise. * misc/Makefile: Likewise. * nis/Makefile: Likewise. * nss/Makefile: Likewise. * po/Makefile: Likewise. (all): Remove target. * posix/Makefile: Include Makeconfig immediately after defining subdir. * pwd/Makefile: Likewise. * resolv/Makefile: Likewise. * resource/Makefile: Likewise. * rt/Makefile: Likewise. * setjmp/Makefile: Likewise. * shadow/Makefile: Likewise. * signal/Makefile: Likewise. * socket/Makefile: Likewise. * soft-fp/Makefile: Likewise. * stdio-common/Makefile: Likewise. * stdlib/Makefile: Likewise. * streams/Makefile: Likewise. * string/Makefile: Likewise. * sunrpc/Makefile: Likewise. (all): Remove target. * sysvipc/Makefile: Include Makeconfig immediately after defining subdir. * termios/Makefile: Likewise. * time/Makefile: Likewise. * timezone/Makefile: Likewise. (all): Remove target. * wcsmbs/Makefile: Include Makeconfig immediately after defining subdir. * wctype/Makefile: Likewise. libidn/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. localedata/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. (all): Remove target. nptl/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir. nptl_db/ChangeLog: * Makefile: Include Makeconfig immediately after defining subdir.
2014-02-21Generate .test-result files for tests with special rules.Joseph Myers1-3/+6
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21Complete _BSD_SOURCE / _SVID_source followup cleanup.Joseph Myers4-17/+17
This patch completes the headers cleanup consequent on removal of _BSD_SOURCE and _SVID_SOURCE (apart from any subsequent deprecations): * #endif conditionals that referred to BSD or SVID are updated. * Redundant __USE_* tests in cases involving __USE_MISC are removed. This includes cases such as __USE_MISC || __USE_ISOC99, where __USE_MISC is redundant (because __USE_MISC is only ever defined in the default / _DEFAULT_SOURCE / _GNU_SOURCE case, when __USE_ISOC99 is also defined; the same applies to the non-XSI-extended POSIX versions), and cases involving __USE_GNU, where __USE_GNU is redundant (because if __USE_GNU is defined, so are the other __USE_* macros). There may well be other cases of __USE_FOO || __USE_BAR tests that could be simplified because one macro implies the other; this patch only addresses cases involving __USE_MISC. Tested x86_64. * bits/fcntl.h [__USE_MISC]: Remove redundant conditionals. * bits/sigaction.h [__USE_MISC]: Likewise. * bits/waitstatus.h: Update #endif comments. * ctype/ctype.h: Likewise. * dirent/dirent.h: Likewise. [__USE_MISC]: Remove redundant conditionals. * grp/grp.h: Update #endif comments. [__USE_GNU]: Remove redundant conditionals. [__USE_MISC]: Likewise. * inet/netinet/in.h [__USE_GNU]: Likewise. * io/sys/stat.h [__USE_MISC]: Likewise. * libio/bits/stdio-ldbl.h [__USE_MISC]: Likewise. * libio/bits/stdio.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * libio/bits/stdio2.h [__USE_MISC]: Likewise. * libio/stdio.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * math/bits/math-finite.h [__USE_MISC]: Likewise. * math/bits/mathcalls.h [__USE_MISC]: Likewise. * math/math.h: Update #else and #endif comments. [__USE_MISC]: Remove redundant conditionals. * misc/sys/uio.h: Update #endif comments. * posix/bits/unistd.h [__USE_MISC]: Remove redundant conditionals. * posix/glob.h [__USE_MISC]: Likewise. * posix/sys/types.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * posix/sys/wait.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * posix/unistd.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * pwd/pwd.h [__USE_GNU]: Likewise. [__USE_MISC]: Likewise. * resolv/netdb.h [__USE_GNU]: Likewise. * signal/signal.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * stdlib/stdlib.h: Update #else and #endif comments. [__USE_MISC]: Remove redundant conditionals. [__USE_GNU]: Likewise. * string/bits/string2.h [__USE_MISC]: Likewise. * string/string.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * sysdeps/m68k/m680x0/fpu/bits/mathinline.h [__USE_MISC]: Likewise. * sysdeps/mach/hurd/bits/fcntl.h [__USE_MISC]: Likewise. * sysdeps/mach/hurd/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/sigaction.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/bits/fcntl-linux.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * sysdeps/unix/sysv/linux/bits/in.h [__USE_GNU]: Likewise. * sysdeps/unix/sysv/linux/bits/sigaction.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/bits/socket.h [__USE_GNU]: Likewise. * sysdeps/unix/sysv/linux/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sigaction.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/m68k/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/mips/bits/sigaction.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/mips/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/s390/bits/sigaction.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/s390/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sigaction.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/x86/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/x86/bits/string.h: Update #endif comments. * sysdeps/x86/fpu/bits/mathinline.h [__USE_MISC]: Remove redundant conditionals. * time/sys/time.h: Update #endif comments. * time/time.h: Likewise. [__USE_MISC]: Remove redundant conditionals.
2014-02-14Split up rules for tests using mtrace and something else.Joseph Myers1-7/+9
Most glibc tests that use mtrace to verify that there were no memory leaks from the glibc facilities used in a given test depend on the .out file of the previous test so that the mtrace test runs mtrace and nothing else. Two, however, have a single target combining mtrace with something else. In the case of libio/tst-fopenloc.check, the test both compares the output with an expected baseline and runs mtrace. In the case of posix/tst-rxspencer-mem, the test is run (with different command line from the main run) and then mtrace is run, from the same makefile target. This patch splits both of these tests up to use separate makefile targets for each thing tested; in the tst-rxspencer case, a file tst-rxspencer-no-utf8.c is created that just includes tst-rxspencer.c, as is usual for tests where the same code gets tested in different compile-time or runtime configurations. Adding $(evaluate-test) to test commands, as in <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html>, will no longer need to insert && between multiple commands, as all tests will either have just a single command or already use &&. Tested x86_64. * libio/Makefile ($(objpfx)tst-fopenloc.check): Split into separate $(objpfx)tst-fopenloc-cmp.out and $(objpfx)tst-fopenloc-mem.out targets. (tests): Update dependencies. * posix/Makefile (tests variable): Add tst-rxspencer-no-utf8. (generated): Change tst-rxspencer-mem and tst-rxspencer.mtrace to tst-rxspencer-no-utf8-mem and tst-rxspencer-no-utf8.mtrace. (tst-rxspencer-no-utf8-ARGS): New variable. (tst-rxspencer-no-utf8-ENV): Likewise. (tests target): Depend on $(objpfx)tst-rxspencer-no-utf8-mem instead of $(objpfx)tst-rxspencer-mem. ($(objpfx)tst-rxspencer-mem): Change target to $(objpfx)tst-rxspencer-no-utf8-mem. Depend on $(objpfx)tst-rxspencer-no-utf8.out instead of running test program. * posix/tst-rxspencer-no-utf8.c: New file.
2014-02-13Clean up trivially redundant __USE_MISC conditionals.Joseph Myers1-3/+2
This patch cleans up cases of __USE_MISC that are trivially redundant after the recent substitution of __USE_MISC for __USE_BSD and __USE_SVID: either in constructs such as "defined __USE_MISC || defined __USE_MISC", or else (in the bits/mman.h case) a conditional on __USE_MISC nested inside another __USE_MISC conditional. (The cleanups remaining after this patch are still quite large, but it seems a reasonable piece to separate out.) Tested x86_64. * bits/mman.h [__USE_MISC]: Remove redundant conditionals. * ctype/ctype.h [__USE_MISC]: Likewise. * dirent/dirent.h [__USE_MISC]: Likewise. * grp/grp.h [__USE_MISC]: Likewise. * io/fcntl.h [__USE_MISC]: Likewise. * io/sys/stat.h [__USE_MISC]: Likewise. * libio/stdio.h [__USE_MISC]: Likewise. * posix/unistd.h [__USE_MISC]: Likewise. * pwd/pwd.h [__USE_MISC]: Likewise. * stdlib.h [__USE_MISC]: Likewise. * string/bits/string2.h [__USE_MISC]: Likewise. * string/string.h [__USE_MISC]: Likewise. * time/time.h [__USE_MISC]: Likewise.
2014-02-12Combine __USE_BSD and __USE_SVID into __USE_MISC.Joseph Myers3-11/+11
This patch cleans up following the obsoletion of _BSD_SOURCE and _SVID_SOURCE by combining __USE_BSD and __USE_SVID into __USE_MISC. The only non-mechanical part of this patch is the changes to features.h; everything else is simple substitution of __USE_MISC for the old macros. Thus, this patch leaves obviously redundant conditionals such as "defined __USE_MISC || defined __USE_MISC", and does not update #endif comments where they referred to BSD or SVID in words instead of the literal macro name. This is intended to facilitate patch review by separating the less mechanical changes from these purely mechanical changes into a separate patch. (I do intend to integrate all the changes from <https://sourceware.org/ml/libc-alpha/2013-12/msg00226.html>, which I believe includes all the trailing comment updates, in subsequent patches.) Tested x86_64. * include/features.h (__USE_BSD): Remove macro definitions. (__USE_SVID): Likewise. (_BSD_SOURCE): Likewise. (_SVID_SOURCE): Likewise. [!defined _BSD_SOURCE && !defined _SVID_SOURCE]: Remove condition from definition of _DEFAULT_SOURCE. [_BSD_SOURCE || _SVID_SOURCE]: Change condition to [_DEFAULT_SOURCE]. * bits/fcntl.h [__USE_BSD]: Change condition to [__USE_MISC]. * bits/mman.h [__USE_BSD]: Likewise. * bits/termios.h [__USE_BSD]: Likewise. * bits/waitstatus.h [__USE_BSD]: Likewise. * ctype/ctype.h [__USE_SVID]: Likewise. * dirent/dirent.h [__USE_BSD]: Likewise. * grp/grp.h [__USE_SVID]: Likewise. [__USE_BSD]: Likewise. * inet/netinet/igmp.h [__USE_BSD]: Likewise. * io/fcntl.h [__USE_BSD]: Likewise. * io/ftw.h [__USE_BSD]: Likewise. * io/sys/stat.h [__USE_BSD]: Likewise. * libio/bits/stdio-ldbl.h [__USE_BSD]: Likewise. * libio/bits/stdio2.h [__USE_BSD]: Likewise. * libio/stdio.h [__USE_SVID]: Likewise. [__USE_BSD]: Likewise. * math/math.h [__USE_SVID]: Likewise. [__USE_BSD]: Likewise. * misc/bits/syslog-ldbl.h [__USE_BSD]: Likewise. * misc/bits/syslog.h [__USE_BSD]: Likewise. * misc/search.h [__USE_SVID]: Likewise. * misc/sys/mman.h [__USE_BSD]: Likewise. * misc/sys/syslog.h [__USE_BSD]: Likewise. * misc/sys/uio.h [__USE_BSD]: Likewise. * posix/bits/unistd.h [__USE_BSD]: Likewise. * posix/glob.h [__USE_BSD]: Likewise. * posix/regex.h [__USE_BSD]: Likewise. * posix/sys/types.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * posix/sys/utsname.h [__USE_SVID]: Likewise. * posix/sys/wait.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * posix/unistd.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * pwd/pwd.h [__USE_SVID]: Likewise. * resolv/netdb.h [__USE_BSD]: Likewise. * setjmp/setjmp.h [__USE_BSD]: Likewise. * signal/signal.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * socket/sys/socket.h [__USE_BSD]: Likewise. * stdlib/fmtmsg.h [__USE_SVID]: Likewise. * stdlib/stdlib.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * string/bits/string2.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * string/bits/string3.h [__USE_BSD]: Likewise. * string/endian.h [__USE_BSD]: Likewise. * string/string.h [__USE_SVID]: Likewise. [__USE_BSD]: Likewise. * string/strings.h [__USE_BSD]: Likewise. * sysdeps/generic/netinet/ip.h [__USE_BSD]: Likewise. * sysdeps/gnu/netinet/ip_icmp.h [__USE_BSD]: Likewise. * sysdeps/mach/hurd/bits/fcntl.h [__USE_BSD]: Likewise. * sysdeps/mach/hurd/bits/stat.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/mman.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/termios.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/bits/mman-linux.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/bits/sys_errlist.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/bits/termios.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/mips/bits/termios.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/netinet/if_ether.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/netinet/if_fddi.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/netinet/if_tr.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios.h [__USE_BSD]: Likewise. * sysdeps/x86/bits/string.h [__USE_BSD]: Likewise. * sysvipc/sys/ipc.h [__USE_SVID]: Likewise. * termios/termios.h [__USE_BSD]: Likewise. * time/sys/time.h [__USE_BSD]: Likewise. * time/time.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/mman.h [__USE_BSD]: Change condition to [__USE_MISC].
generated by cgit v1.1 at 2024-11-20 05:12:36 +0000