aboutsummaryrefslogtreecommitdiff
path: root/libio/fileops.c
AgeCommit message (Collapse)AuthorFilesLines
2015-07-08Use "|" instead of "+" when combine the _IO_LINE_BUF and _IO_UNBUFFERED flagsFeng Gao1-2/+2
Both of "_IO_UNBUFFERED" and "_IO_LINE_BUF" are the bit flags, but I find there are some codes looks like "_IO_LINE_BUF+_IO_UNBUFFERED", while some codes are "_IO_LINE_BUF|_IO_UNBUFFERED". I think the former is not good, even though the final result is same.
2015-05-22Avoid some aliasing violations in libioFlorian Weimer1-9/+9
2015-02-24Fix BZ #17916 - fopen unbounded stack usage for ccs= modesPaul Pluzhnikov1-1/+12
2015-02-17Cleanup: add missing #include'sPaul Pluzhnikov1-0/+1
* libio/fileops.c: Add missing sys/mman.h * libio/iopopen.c: Add missing fcntl.h, remove redundant unistd.h
2015-01-02Update copyright dates with scripts/update-copyrights.Joseph Myers1-1/+1
2014-12-04Fix up function definition styleSiddhesh Poyarekar1-92/+27
Don't use K&R style for function definitions.
2014-12-04Reset cached offset when reading to end of stream (BZ #17653)Siddhesh Poyarekar1-1/+7
POSIX allows applications to switch file handles when a read results in an end of file. Unset the cached offset at this point so that it is queried again.
2014-12-04ftell: seek to end only when there are unflushed bytes (BZ #17647)Siddhesh Poyarekar1-4/+3
Currently we seek to end of file if there are unflushed writes or the stream is in write mode, to get the current offset for writing in append mode, which is the end of file. The latter case (i.e. stream is in write mode, but no unflushed writes) is unnecessary since it will only happen when the stream has just been flushed, in which case the recorded offset ought to be reliable. Removing that case lets ftell give the correct offset when it follows an ftruncate. The latter truncates the file, but does not change the file position, due to which it is permissible to call ftell without an intervening fseek call. Tested on x86_64 to verify that the added test case fails without the patch and succeeds with it, and that there are no additional regressions due to it. [BZ #17647] * libio/fileops.c (do_ftell): Seek only when there are unflushed writes. * libio/wfileops.c (do_ftell_wide): Likewise. * libio/tst-ftell-active-handler.c (do_ftruncate_test): New test case. (do_one_test): Call it.
2014-09-12Complete the removal of __gconv_translit_findFlorian Weimer1-7/+2
Prior to the 2.20 release, the function was just changed to fail unconditionally, in commit a1a6a401ab0a3c9f15fb7eaebbdcee24192254e8. This commit removes the function completely, including gconv bits which depend on it. This changes the gconv ABI, which is not a public interface.
2014-05-27Fix offset computation for append+ mode on switching from read (BZ #16724)Siddhesh Poyarekar1-1/+11
The offset computation in write mode uses the fact that _IO_read_end is kept in sync with the external file offset. This however is not true when O_APPEND is in effect since switching to write mode ought to send the external file offset to the end of file without making the necessary adjustment to _IO_read_end. Hence in append mode, offset computation when writing should only consider the effect of unflushed writes, i.e. from _IO_write_base to _IO_write_ptr. The wiki has a detailed document that describes the rationale for offsets returned by ftell in various conditions: https://sourceware.org/glibc/wiki/File%20offsets%20in%20a%20stdio%20stream%20and%20ftell
2014-03-17Fix offset caching for streams and use it for ftell (BZ #16680)Siddhesh Poyarekar1-65/+37
The ftell implementation was made conservative to ensure that incorrectly cached offsets never affect it. However, this causes problems for append mode when a file stream is rewound. Additionally, the 'clever' trick of using stat to get position for append mode files caused more problems than it solved and broke old behavior. I have described the various problems that it caused and then finally the solution. For a and a+ mode files, rewinding the stream should result in ftell returning 0 as the offset, but the stat() trick caused it to (incorrectly) always return the end of file. Now I couldn't find anything in POSIX that specifies the stream position after rewind() for a file opened in 'a' mode, but for 'a+' mode it should be set to 0. For 'a' mode too, it probably makes sense to keep it set to 0 in the interest of retaining old behavior. The initial file position for append mode files is implementation defined, so the implementation could either retain the current file position or move the position to the end of file. The earlier ftell implementation would move the offset to end of file for append-only mode, but retain the old offset for a+ mode. It would also cache the offset (this detail is important). My patch broke this and would set the initial position to end of file for both append modes, thus breaking old behavior. I was ignorant enough to write an incorrect test case for it too. The Change: I have now brought back the behavior of seeking to end of file for append-only streams, but with a slight difference. I don't cache the offset though, since we would want ftell to query the current file position through lseek while the stream is not active. Since the offset is moved to the end of file, we can rely on the file position reported by lseek and we don't need to resort to the stat() nonsense. Finally, the cache is always reliable, except when there are unflished writes in an append mode stream (i.e. both a and a+). In the latter case, it is safe to just do an lseek to SEEK_END. The value can be safely cached too, since the file handle is already active at this point. Incidentally, this is the only state change we affect in the file handle (apart from taking locks of course). I have also updated the test case to correct my impression of the initial file position for a+ streams to the initial behavior. I have verified that this does not break any existing tests in the testsuite and also passes with the new tests.
2014-03-04Use cached offset in ftell when reliableSiddhesh Poyarekar1-6/+28
The cached offset is reliable to use in ftell when the stream handle is active. We can consider a stream as being active when there is unflushed data. However, even in this case, we can use the cached offset only when the stream is not being written to in a+ mode, because this case may have unflushed data and a stale offset; the previous read could have sent it off somewhere other than the end of the file. There were a couple of adjustments necessary to get this to work. Firstly, fdopen now ceases to use _IO_attach_fd because it sets the offset cache to the current file position. This is not correct because there could be changes to the file descriptor before the stream handle is activated, which would not get reflected. A similar offset caching action is done in _IO_fwide, claiming that wide streams have 'problems' with the file offsets. There don't seem to be any obvious problems with not having the offset cache available, other than that it will have to be queried in a subsequent read/write/seek. I have removed this as well. The testsuite passes successfully with these changes on x86_64.
2014-03-04Separate ftell from fseek logic and avoid modifying FILE data (#16532)Siddhesh Poyarekar1-30/+75
ftell semantics are distinct from fseek(SEEK_CUR) especially when it is called on a file handler that is not yet active. Due to this caveat, much care needs to be taken while modifying the handler data and hence, this first iteration on separating out ftell focusses on maintaining handler data integrity at all times while it figures out the current stream offset. The result is that it makes a syscall for every offset request. There is scope for optimizing this by caching offsets when we know that the handler is active. A simple way to find out is when the buffers have data. It is not so simple to find this out when the buffer is empty without adding some kind of flag.
2014-02-10Use glibc_likely instead __builtin_expect.Ondřej Bílka1-5/+5
2014-01-01Update copyright notices with scripts/update-copyrightsAllan McRae1-1/+1
2013-10-11Fix fwrite() reading beyond end of buffer in error pathEric Biggers1-12/+9
Partially revert commits 2b766585f9b4ffabeef2f36200c275976b93f2c7 and de2fd463b1c0310d75084b6d774fb974075a4ad9, which were intended to fix BZ#11741 but caused another, likely worse bug, namely that fwrite() and fputs() could, in an error path, read data beyond the end of the specified buffer, and potentially even write this data to the file. Fix BZ#11741 properly by checking the return value from _IO_padn() in stdio-common/vfprintf.c.
2013-06-07Avoid use of "register" as optimization hint.Joseph Myers1-7/+7
2013-01-02Update copyright notices with scripts/update-copyrights.Joseph Myers1-1/+1
2012-12-01[BZ #12724] libio: revert partial POSIX 2008 fclose supportMike Frysinger1-11/+3
In BZ #12724, partial support for POSIX 2008 fclose behavior was added. Since it isn't entirely conforming to the spec, some applications are known to be breaking in this intermediate state. So revert the partial support until we can get things fully implemented. This reverts commit fcabc0f8b185f9e0a9289720be5ede6c39b3bf21. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-11-16printf should return negative value on errorSiddhesh Poyarekar1-8/+10
[BZ #11741] Fixed bug where printf and family may return a spurious success when printing padded formats.
2012-10-18Remove _G_OPEN64, _G_LSEEK64, _G_MMAP64, _G_FSTAT64 from _G_config.h.Joseph Myers1-43/+10
2012-10-09Remove _G_off64_t and _G_stat64 from _G_config.h.Joseph Myers1-4/+4
2012-09-28Don't flush write buffer for ftellSiddhesh Poyarekar1-5/+16
[BZ #5298] Use write pointer state along with the file offset and/or the read pointers to get the current file position.
2012-09-25Fix minor typos in commentsSiddhesh Poyarekar1-2/+2
2012-09-05Fix typos in commentsSiddhesh Poyarekar1-1/+1
* libio/fileops.c: Fix typos in comments. * libio/oldfileops.c: Likewise. * libio/wfileops.c: Likewise.
2012-05-24Remove use of INTDEF/INTUSE in libioAndreas Schwab1-75/+70
2012-05-10Hurd: #include <kernel-features.h>Thomas Schwinge1-2/+2
2012-03-29Remove xsputn small copy optimization.David S. Miller1-15/+4
* libio/fileops.c (_IO_new_file_xsputn): Don't try to optimize small copies by hand.
2012-02-09Replace FSF snail mail address with URLs.Paul Eggert1-3/+2
2012-01-30Remove miscellaneous __STDC__ conditionals.Joseph Myers1-3/+1
2011-08-20Fix fopen (non-existing-file, "re") errnoAndreas Jaeger1-13/+11
2011-05-17Fix fileops.c build for old kernelsH.J. Lu1-0/+1
2011-05-15Fix a few problems in fopen and freopenUlrich Drepper1-3/+17
fopen should set the FD_CLOEXEC flag if requested evenif the kernel does not support an aotmic operation. freopen should reuse the file descriptor for the stream. This is especially important for calls to change the standard streams (stin, stdout, stderr).
2011-05-14Initialize variable in _IO_new_file_close_itUlrich Drepper1-0/+2
The last change left a variable in some situations uninitialized.
2011-05-13Fix file descriptor position after fcloseUlrich Drepper1-6/+12
fclose should leave the file descriptor position after the last read or written byte.
2011-04-22Use al possible bytes from fopen mode string.Eric Blake1-16/+16
2011-04-22Remove doubled words.Jim Meyering1-3/+3
2009-06-09(_IO_new_file_fopen): Don't prematurely stop parsing mode string.Ulrich Drepper1-3/+3
2008-07-27* sysdeps/unix/sysv/linux/bits/socket.h: Define PF_ISDN and AF_ISDN.Ulrich Drepper1-1/+1
* sysdeps/unix/sysv/linux/sparc/bits/socket.h: Likewise.
2008-07-26[BZ #6771]Ulrich Drepper1-1/+3
* libio/fileops.c (_IO_new_file_attach): Preserve errno around success call of _IO_SEEKOFF or calls which failed because the descriptor is for a pipe.
2007-07-22(_IO_new_file_fopen): Recognize 'e' flag and set O_CLOEXEC is needed.Ulrich Drepper1-0/+5
2007-04-16* libio/libio.h (__underflow, __uflow, __overflow, __wunderflow,Ulrich Drepper1-6/+5
__wuflow, __woverflow, _IO_getc, _IO_putc, _IO_peekc_locked, _IO_padn, _IO_sgetn, _IO_seekoff, _IO_seekpos, _IO_getwc, _IO_putwc, _IO_wpadn): Remove __THROW. * libio/fileops.c (new_do_write, _IO_file_xsgetn_mmap, _IO_file_xsgetn_maybe_mmap): Likewise. * libio/oldfileops.c (old_do_write): Likewise. * libio/libioP.h (_IO_switch_to_get_mode, _IO_switch_to_wget_mode, _IO_init_marker, _IO_init_wmarker, _IO_default_uflow, _IO_wdefault_uflow, _IO_default_setbuf, _IO_default_seekpos, _IO_do_write, _IO_new_do_write, _IO_old_do_write, _IO_wdo_write, _IO_flush_all_lockp, _IO_flush_all, _IO_cleanup, _IO_flush_all_linebuffered, _IO_new_fgetpos, _IO_old_fgetpos, _IO_new_fsetpos, _IO_old_fsetpos, _IO_new_fgetpos64, _IO_old_fgetpos64, _IO_new_fsetpos64, _IO_old_fsetpos64, _IO_file_setbuf, _IO_file_seekoff, _IO_file_xsputn, _IO_file_xsgetn, _IO_file_underflow, _IO_file_underflow_mmap, _IO_file_underflow_maybe_mmap, _IO_file_overflow, _IO_file_attach, _IO_file_open, _IO_file_fopen, _IO_file_write, _IO_file_read, _IO_file_sync, _IO_file_close_it, _IO_file_finish, _IO_new_file_attach, _IO_new_file_close_it, _IO_new_file_finish, _IO_new_file_fopen, _IO_new_file_setbuf, _IO_file_setbuf_mmap, _IO_new_file_sync, _IO_new_file_underflow, _IO_new_file_overflow, _IO_new_file_seekoff, _IO_new_file_write, _IO_new_file_xsputn, _IO_old_file_setbuf, _IO_old_file_seekoff, _IO_old_file_xsputn, _IO_old_file_underflow, _IO_old_file_overflow, _IO_old_file_attach, _IO_old_file_fopen, _IO_old_file_write, _IO_old_file_sync, _IO_old_file_close_it, _IO_old_file_finish, _IO_wfile_xsputn, _IO_wfile_setbuf, _IO_wfile_sync, _IO_wfile_underflow, _IO_wfile_overflow, _IO_wfile_seekoff, _IO_old_proc_open, _IO_old_proc_close, _IO_getdelim, _IO_flush_all_internal, _IO_adjust_column_internal, _IO_default_uflow_internal, _IO_default_xsgetn_internal, _IO_wdefault_xsputn_internal, _IO_wdefault_xsgetn_internal, _IO_wdefault_uflow_internal, _IO_file_setbuf_internal, _IO_file_seekoff_internal, _IO_file_xsputn_internal, _IO_file_xsgetn_internal, _IO_file_close_it_internal, _IO_file_underflow_internal, _IO_file_overflow_internal, _IO_file_attach_internal, _IO_file_fopen_internal, _IO_file_sync_internal, _IO_file_finish_internal, _IO_wfile_xsputn_internal, _IO_wfile_seekoff_internal, _IO_wfile_sync_internal, _IO_switch_to_wget_mode_internal, _IO_padn_internal, _IO_switch_to_get_mode_internal, _IO_seekoff_unlocked, _IO_seekpos_unlocked): Likewise. (_IO_strtod, _IO_dtoa, _IO_outfloat, _IO_read, _IO_write, _IO_lseek, _IO_close, _IO_fstat): Remove unused prototypes.
2007-01-11[BZ #2510, BZ #2830, BZ #3137, BZ #3313, BZ #3426, BZ #3465, BZ #3480, BZ ↵Ulrich Drepper1-5/+6
#3483, BZ #3493, BZ #3514, BZ #3515, BZ #3664, BZ #3673, BZ #3674] 2007-01-11 Jakub Jelinek <jakub@redhat.com> * sysdeps/i386/soft-fp/sfp-machine.h: Remove. * sysdeps/x86_64/soft-fp/sfp-machine.h: Likewise. 2007-01-10 Ulrich Drepper <drepper@redhat.com> * io/fts.c: Make sure fts_cur is always valid after return from fts_read. Patch by Miloslav Trmac <mitr@redhat.com>. 2006-10-27 Richard Sandiford <richard@codesourcery.com> * elf/elf.h (R_MIPS_GLOB_DAT): Define. (R_MIPS_NUM): Bump by 1. 2007-01-03 Jakub Jelinek <jakub@redhat.com> * posix/execvp.c: Include alloca.h. (allocate_scripts_argv): Renamed to... (scripts_argv): ... this. Don't allocate buffer here nor count arguments. (execvp): Use alloca if possible. * posix/Makefile: Add rules to build and run tst-vfork3 test. * posix/tst-vfork3.c: New test. * stdlib/Makefile (tst-strtod3-ENV): Define. 2007-01-02 Ulrich Drepper <drepper@redhat.com> * posix/getconf.c: Update copyright year. * nss/getent.c: Likewise. * iconv/iconvconfig.c: Likewise. * iconv/iconv_prog.c: Likewise. * elf/ldconfig.c: Likewise. * catgets/gencat.c: Likewise. * csu/version.c: Likewise. * elf/ldd.bash.in: Likewise. * elf/sprof.c (print_version): Likewise. * locale/programs/locale.c: Likewise. * locale/programs/localedef.c: Likewise. * nscd/nscd.c (print_version): Likewise. * debug/xtrace.sh: Likewise. * malloc/memusage.sh: Likewise. * malloc/mtrace.pl: Likewise. * debug/catchsegv.sh: Likewise. 2006-12-24 Ulrich Drepper <drepper@redhat.com> * malloc/malloc.c (sYSMALLOc): Remove some unnecessary alignment attempts. 2006-12-23 Ulrich Drepper <drepper@redhat.com> * posix/wordexp.c: Remove some unnecessary tests. 2006-12-20 SUGIOKA Toshinobu <sugioka@itonet.co.jp> * sysdeps/unix/sysv/linux/sh/bits/shm.h: New file. * nss/getXXbyYY_r.c: Include atomic.h. (INTERNAL (REENTRANT_NAME)): Write startp after start_fct, add atomic_write_barrier () in between. 2006-11-28 Jakub Jelinek <jakub@redhat.com> * elf/dl-support.c: Include dl-procinfo.h. * sysdeps/powerpc/dl-procinfo.h (PPC_PLATFORM_POWER4, PPC_PLATFORM_PPC970, PPC_PLATFORM_POWER5, PPC_PLATFORM_POWER5_PLUS, PPC_PLATFORM_POWER6, PPC_PLATFORM_CELL_BE, PPC_PLATFORM_POWER6X): Define. (_dl_string_platform): Use PPC_PLATFORM_* macros instead of hardcoded constants. * sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_platform): Use PPC_PLATFORM_* macros for array designators. 2006-11-11 Steven Munroe <sjmunroe@us.ibm.com> * sysdeps/powerpc/dl-procinfo.c (_dl_powerpc_cap_flags): Add 3 new cap names to the beginning. (_dl_powerpc_platforms): Add "power6x". * sysdeps/powerpc/dl-procinfo.h (_DL_HWCAP_FIRST): Decrease. (HWCAP_IMPORTANT): Add PPC_FEATURE_HAS_DFP. (_DL_PLATFORMS_COUNT): Increase. (_dl_string_platform): Handle power6x case. * sysdeps/powerpc/sysdep.h (PPC_FEATURE_PA6T, PPC_FEATURE_HAS_DFP, PPC_FEATURE_POWER6_EXT): Define. (PPC_FEATURE_POWER5, PPC_FEATURE_POWER5_PLUS): Correct Comment. [-2^31 .. 2^31) range. * sysdeps/unix/sysv/linux/bits/statvfs.h: Define ST_RELATIME. * sysdeps/unix/sysv/linux/internal_statvfs.c (__statvfs_getflags): Handle relatime mount option. 2006-12-13 Jakub Jelinek <jakub@redhat.com> * sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext.S: Include kernel-features.h. 2006-12-11 Ulrich Drepper <drepper@redhat.com> * stdlib/strtod_l.c (____STRTOF_INTERNAL): Parse thousand separators also if no non-zero digits found. * stdlib/Makefile (tests): Add tst-strtod3. [BZ #3664] * stdlib/strtod_l.c (____STRTOF_INTERNAL): Fix test to recognize empty parsed strings. * stdlib/Makefile (tests): Add tst-strtod2. * stdlib/tst-strtod2.c: New file. [BZ #3673] * stdlib/strtod_l.c (____STRTOF_INTERNAL): Fix exp_limit computation. * stdlib/Makefile (tests): Add tst-atof2. * stdlib/tst-atof2.c: New file. [BZ #3674] * stdlib/strtod_l.c (____STRTOF_INTERNAL): Adjust exponent value correctly if removing trailing zero of hex-float. * stdlib/Makefile (tests): Add tst-atof1. * stdlib/tst-atof1.c: New file. * misc/mntent_r.c (__hasmntopt): Check p[optlen] even when p == rest. Start searching for next comma at p rather than rest. * misc/Makefile (tests): Add tst-mntent2. * misc/tst-mntent2.c: New test. 2006-12-08 Ulrich Drepper <drepper@redhat.com> * malloc/memusage.c: Handle realloc with new size of zero and non-NULL pointer correctly. (me): Really write first record twice. (struct entry): Make format bi-arch safe. (dest): Write out more realloc statistics. * malloc/memusagestat.c (struct entry): Make format bi-arch safe. 2006-12-05 Jakub Jelinek <jakub@redhat.com> * nis/nis_subr.c (nis_getnames): Revert last change. 2006-12-03 Kaz Kojima <kkojima@rr.iij4u.or.jp> * sysdeps/unix/sysv/linux/sh/sys/io.h: Removed. 2006-11-30 H.J. Lu <hongjiu.lu@intel.com> * sysdeps/i386/i686/memcmp.S: Use jump table as the base of jump table entries. 2006-11-30 Jan Kratochvil <jan.kratochvil@redhat.com> * sysdeps/unix/sysv/linux/i386/clone.S: Provide CFI for the outermost `clone' function to ensure proper unwinding stop of gdb. * sysdeps/unix/sysv/linux/x86_64/clone.S: Likewise. 2006-12-01 Ulrich Drepper <drepper@redhat.com> * nscd/nscd.init: Remove obsolete and commented-out -S option handling. 2006-11-23 Jakub Jelinek <jakub@redhat.com> [BZ #3514] * manual/string.texi (strncmp): Fix pastos from wcscmp description. [BZ #3515] * manual/string.texi (strtok): Remove duplicate paragraph. 2006-12-01 Jan Kratochvil <jan.kratochvil@redhat.com> * sysdeps/unix/sysv/linux/x86_64/sigaction.c: Fix compatibility with libgcc not supporting `rflags' unwinding (register # >= 17). 2006-11-30 Jakub Jelinek <jakub@redhat.com> * sunrpc/svc_run.c (svc_run): Set my_pollfd to new_pollfd if realloc succeeded. 2006-11-29 Daniel Jacobowitz <dan@codesourcery.com> Jakub Jelinek <jakub@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * sysdeps/unix/sysv/linux/x86_64/sigaction.c (restore_rt): Add correct unwind information. * sysdeps/unix/sysv/linux/x86_64/Makefile: Provide symbols for 'restore_rt' even in the 'signal' directory. * sysdeps/unix/sysv/linux/x86_64/ucontext_i.sym: Extend the regs list. malloc crashed. Don't allocate memory unnecessarily in each loop. 2006-10-21 Jakub Jelinek <jakub@redhat.com> * resolv/mapv4v6addr.h (map_v4v6_address): Fix last change. 2006-11-20 Ulrich Drepper <drepper@redhat.com> * resolv/mapv4v6addr.h (map_v4v6_address): Optimize a bit. 2006-11-18 Bruno Haible <bruno@clisp.org> * sysdeps/unix/sysv/linux/i386/getgroups.c (__getgroups): Invoke __sysconf only after having tried to call getgroups32. 2006-11-19 Ulrich Drepper <drepper@redhat.com> * nss/nss_files/files-hosts.c (LINE_PARSER): Support IPv6-style addresses for IPv4 queries if they can be mapped. 2006-11-16 Jakub Jelinek <jakub@redhat.com> * sysdeps/x86_64/fpu/s_copysignf.S (__copysignf): Switch to .text. * sysdeps/x86_64/fpu/s_copysign.S (__copysign): Likewise. (signmask): Add .size directive. (othermask): Add .type directive. 2006-11-14 Ulrich Drepper <drepper@redhat.com> * po/nl.po: Update from translation team. * timezone/zdump.c: Redo fix for BZ #3137. 2006-11-14 Jakub Jelinek <jakub@redhat.com> * nss/nss_files/files-alias.c (get_next_alias): Set line back to first_unused after parsing :include: file. * timezone/africa: Update from tzdata2006o. * timezone/antarctica: Likewise. * timezone/asia: Likewise. * timezone/australasia: Likewise. * timezone/backward: Likewise. * timezone/europe: Likewise. * timezone/iso3166.tab: Likewise. * timezone/northamerica: Likewise. * timezone/southamerica: Likewise. * timezone/zone.tab: Likewise. * time/tzfile.c (__tzfile_read): Extend to handle new file format on machines with 64-bit time_t. * timezone/checktab.awk: Update from tzcode2006o. * timezone/ialloc.c: Likewise. * timezone/private.h: Likewise. * timezone/scheck.c: Likewise. * timezone/tzfile.h: Likewise. * timezone/tzselect.ksh: Likewise. * timezone/zdump.c: Likewise. * timezone/zic.c: Likewise. [BZ #3483] * elf/ldconfig.c (main): Call setlocale and textdomain. Patch mostly by Benno Schulenberg <bensberg@justemail.net>. [BZ #3480] * manual/argp.texi: Fix typos. * manual/charset.texi: Likewise. * manual/errno.texi: Likewise. * manual/filesys.texi: Likewise. * manual/lang.texi: Likewise. * manual/maint.texi: Likewise. * manual/memory.texi: Likewise. * manual/message.texi: Likewise. * manual/resource.texi: Likewise. * manual/search.texi: Likewise. * manual/signal.texi: Likewise. * manual/startup.texi: Likewise. * manual/stdio.texi: Likewise. * manual/sysinfo.texi: Likewise. * manual/syslog.texi: Likewise. * manual/time.texi: Likewise. Patch by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>. [BZ #3465] * sunrpc/clnt_raw.c: Minimal message improvements. * sunrpc/pm_getmaps.c: Likewise. * nis/nss_nisplus/nisplus-publickey.c: Likewise. * nis/nis_print_group_entry.c: Likewise. * locale/programs/repertoire.c: Likewise. * locale/programs/charmap.c: Likewise. * malloc/memusage.sh: Likewise. * elf/dl-deps.c: Likewise. * locale/programs/ld-collate.c: Likewise. * libio/vswprintf.c: Likewise. * malloc/memusagestat.c: Likewise. * sunrpc/auth_unix.c: Likewise. * sunrpc/rpc_main.c: Likewise. * nscd/cache.c: Likewise. * locale/programs/repertoire.c: Unify output messages. * locale/programs/charmap.c: Likewise. * locale/programs/ld-ctype.c: Likewise. * locale/programs/ld-monetary.c: Likewise. * locale/programs/ld-numeric.c: Likewise. * locale/programs/ld-time.c: Likewise. * elf/ldconfig.c: Likewise. * nscd/selinux.c: Likewise. * elf/cache.c: Likewise. Patch mostly by Benno Schulenberg <bensberg@justemail.net>. 2006-11-10 Jakub Jelinek <jakub@redhat.com> * string/strxfrm_l.c (STRXFRM): Fix trailing \1 optimization if N is one bigger than return value. * string/tst-strxfrm2.c (do_test): Also test strxfrm with l1 + 1 and l1 last arguments, if buf is defined, verify the return value equals to strlen (buf) and verify no byte beyond passed length is modified. 2006-11-10 Ulrich Drepper <drepper@redhat.com> * po/sv.po: Update from translation team. * sysdeps/gnu/siglist.c (__old_sys_siglist, __old_sys_sigabbrev): Use __new_sys_siglist instead of _sys_siglist_internal as second macro argument. (_old_sys_siglist): Use declare_symbol_alias macro instead of strong_alias. 2006-11-09 Ulrich Drepper <drepper@redhat.com> [BZ #3493] * posix/unistd.h (sysconf): Remove const attribute. * sysdeps/posix/getaddrinfo.c (getaddrinfo): Fix test for temporary or deprecated addresses. Patch by Sridhar Samudrala <sri@us.ibm.com>. * string/Makefile (tests): Add tst-strxfrm2. * string/tst-strxfrm2.c: New file. 2006-10-09 Jakub Jelinek <jakub@redhat.com> * elf/dl-debug.c (_dl_debug_initialize): Check r->r_map for 0 rather than r->r_brk. * string/strxfrm_l.c (STRXFRM): Do the trailing \1 removal optimization even if needed > n. 2006-11-07 Jakub Jelinek <jakub@redhat.com> * include/libc-symbols.h (declare_symbol): Rename to... (declare_symbol_alias): ... this. Add ORIGINAL argument, imply strong_alias (ORIGINAL, SYMBOL) in asm to make sure it preceedes .size directive. * sysdeps/gnu/errlist-compat.awk: Adjust for declare_symbol_alias changes. * sysdeps/gnu/siglist.c: Likewise. 2006-11-03 Steven Munroe <sjmunroe@us.ibm.com> * sysdeps/powerpc/fpu/bits/mathinline.h [__LIBC_INTERNAL_MATH_INLINES]: Moved to ... * sysdeps/powerpc/fpu/math_private.h: ...here. New file. 2006-11-05 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/i386/sysconf.c (intel_check_word): Update handling of cache descriptor 0x49 for new models. * sysdeps/unix/sysv/linux/x86_64/sysconf.c (intel_check_word): Likewise. 2006-11-02 Ulrich Drepper <drepper@redhat.com> * configure.in: Work around ld --help change and avoid -z relro test completely if the architecture doesn't care about security. 2006-11-01 Ulrich Drepper <drepper@redhat.com> * po/sv.po: Update from translation team. 2006-10-31 Ulrich Drepper <drepper@redhat.com> * stdlib/atexit.c (atexit): Don't mark as hidden when used to generate compatibility version. 2006-10-29 Ulrich Drepper <drepper@redhat.com> * configure.in: Relax -z relro requirement a bit. * po/sv.po: Update from translation team. 2006-10-29 Jakub Jelinek <jakub@redhat.com> * elf/dl-sym.c (do_sym): Use RTLD_SINGLE_THREAD_P. * elf/dl-runtime.c (_dl_fixup, _dl_profile_fixup): Likewise. * elf/dl-close.c (_dl_close_worker): Likewise. * elf/dl-open.c (_dl_open_worker): Likewise. * sysdeps/generic/sysdep-cancel.h (RTLD_SINGLE_THREAD_P): Define. * configure.in: Require assembler support for visibility, compiler support for visibility and aliases, linker support for various -z options. * Makeconfig: Remove conditional code which now is unnecessary. * config.h.in: Likewise. * config.make.in: Likewise. * dlfcn/Makefile: Likewise. * elf/Makefile: Likewise. * elf/dl-load.c: Likewise. * elf/rtld.c: Likewise. * include/libc-symbols.h: Likewise. * include/stdio.h: Likewise. * io/Makefile: Likewise. * io/fstat.c: Likewise. * io/fstat64.c: Likewise. * io/fstatat.c: Likewise. * io/fstatat64.c: Likewise. * io/lstat.c: Likewise. * io/lstat64.c: Likewise. * io/mknod.c: Likewise. * io/mknodat.c: Likewise. * io/stat.c: Likewise. * io/stat64.c: Likewise. * libio/stdio.c: Likewise. * nscd/Makefile: Likewise. * stdlib/Makefile: Likewise. * stdlib/atexit.c: Likewise. * sysdeps/generic/ldsodefs.h: Likewise. * sysdeps/i386/dl-machine.h: Likewise. * sysdeps/i386/sysdep.h: Likewise. * sysdeps/i386/i686/memcmp.S: Likewise. * sysdeps/powerpc/powerpc32/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/i386/sigaction.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/sigaction.c: Likewise. * Makerules: USE_TLS support is now default. * tls.make.c: Likewise. * csu/Versions: Likewise. * csu/libc-start.c: Likewise. * csu/libc-tls.c: Likewise. * csu/version.c: Likewise. * dlfcn/dlinfo.c: Likewise. * elf/dl-addr.c: Likewise. * elf/dl-cache.c: Likewise. * elf/dl-close.c: Likewise. * elf/dl-iteratephdr.c: Likewise. * elf/dl-load.c: Likewise. * elf/dl-lookup.c: Likewise. * elf/dl-object.c: Likewise. * elf/dl-open.c: Likewise. * elf/dl-reloc.c: Likewise. * elf/dl-support.c: Likewise. * elf/dl-sym.c: Likewise. * elf/dl-sysdep.c: Likewise. * elf/dl-tls.c: Likewise. * elf/ldconfig.c: Likewise. * elf/rtld.c: Likewise. * elf/tst-tls-dlinfo.c: Likewise. * elf/tst-tls1.c: Likewise. * elf/tst-tls10.h: Likewise. * elf/tst-tls14.c: Likewise. * elf/tst-tls2.c: Likewise. * elf/tst-tls3.c: Likewise. * elf/tst-tls4.c: Likewise. * elf/tst-tls5.c: Likewise. * elf/tst-tls6.c: Likewise. * elf/tst-tls7.c: Likewise. * elf/tst-tls8.c: Likewise. * elf/tst-tls9.c: Likewise. * elf/tst-tlsmod1.c: Likewise. * elf/tst-tlsmod13.c: Likewise. * elf/tst-tlsmod13a.c: Likewise. * elf/tst-tlsmod14a.c: Likewise. * elf/tst-tlsmod2.c: Likewise. * elf/tst-tlsmod3.c: Likewise. * elf/tst-tlsmod4.c: Likewise. * elf/tst-tlsmod5.c: Likewise. * elf/tst-tlsmod6.c: Likewise. * include/errno.h: Likewise. * include/link.h: Likewise. * include/tls.h: Likewise. * locale/global-locale.c: Likewise. * locale/localeinfo.h: Likewise. * malloc/arena.c: Likewise. * malloc/hooks.c: Likewise. * malloc/malloc.c: Likewise. * resolv/Versions: Likewise. * sysdeps/alpha/dl-machine.h: Likewise. * sysdeps/alpha/libc-tls.c: Likewise. * sysdeps/generic/ldsodefs.h: Likewise. * sysdeps/generic/tls.h: Likewise. * sysdeps/i386/dl-machine.h: Likewise. * sysdeps/ia64/dl-machine.h: Likewise. * sysdeps/ia64/libc-tls.c: Likewise. * sysdeps/mach/hurd/fork.c: Likewise. * sysdeps/mach/hurd/i386/tls.h: Likewise. * sysdeps/powerpc/powerpc32/dl-machine.c: Likwise. * sysdeps/powerpc/powerpc32/dl-machine.h: Likewise. * sysdeps/powerpc/powerpc64/dl-machine.h: Likewise. * sysdeps/s390/libc-tls.c: Likewise. * sysdeps/s390/s390-32/dl-machine.h: Likewise. * sysdeps/s390/s390-64/dl-machine.h: Likewise. * sysdeps/sh/dl-machine.h: Likewise. * sysdeps/sparc/sparc32/dl-machine.h: Likewise. * sysdeps/sparc/sparc64/dl-machine.h: Likewise. * sysdeps/x86_64/dl-machine.h: Likewise. [BZ #3426] * stdlib/stdlib.h: Adjust comment for canonicalize_file_name to reality. 2006-10-27 Jakub Jelinek <jakub@redhat.com> * elf/dl-lookup.c (_dl_debug_bindings): Remove unused symbol_scope argument. (_dl_lookup_symbol_x): Adjust caller. * sysdeps/generic/ldsodefs.h (struct link_namespaces): Remove _ns_global_scope. * elf/rtld.c (dl_main): Don't initialize _ns_global_scope. * elf/dl-libc.c: Revert l_scope name changes. * elf/dl-load.c: Likewise. * elf/dl-object.c: Likewise. * elf/rtld.c: Likewise. * elf/dl-close.c (_dl_close): Likewise. * elf/dl-open.c (dl_open_worker): Likewise. If not SINGLE_THREAD_P, always use __rtld_mrlock_{change,done}. Always free old scope list here if not l_scope_mem. * elf/dl-runtime.c (_dl_fixup, _dl_profile_fixup): Revert l_scope name change. Never free scope list here. Just __rtld_mrlock_lock before the lookup and __rtld_mrlock_unlock it after the lookup. * elf/dl-sym.c: Likewise. * include/link.h (struct r_scoperec): Remove. (struct link_map): Replace l_scoperec with l_scope, l_scoperec_mem with l_scope_mem and l_scoperec_lock with l_scope_lock. 2006-10-25 Ulrich Drepper <drepper@redhat.com> * sysdeps/gnu/netinet/tcp.h: Define TCP_CONGESTION. 2006-10-18 Ulrich Drepper <drepper@redhat.com> * configure.in: Disable building profile libraries by default. 2006-10-18 Ulrich Drepper <drepper@redhat.com> * elf/dl-lookup.c (_dl_lookup_symbol_x): Add warning to _dl_lookup_symbol_x code. 2006-10-17 Jakub Jelinek <jakub@redhat.com> * elf/dl-runtime.c: Include sysdep-cancel.h. (_dl_fixup, _dl_profile_fixup): Use __rtld_mrlock_* and scoperec->nusers only if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros. * elf/dl-sym.c: Include sysdep-cancel.h. (do_sym): Use __rtld_mrlock_* and scoperec->nusers only if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros. * elf/dl-close.c: Include sysdep-cancel.h. (_dl_close): Use __rtld_mrlock_* and scoperec->nusers only if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros. * elf/dl-open.c: Include sysdep-cancel.h. (dl_open_worker): Use __rtld_mrlock_* and scoperec->nusers only if !SINGLE_THREAD_P. Use atomic_* instead of catomic_* macros. 2006-10-17 Jakub Jelinek <jakub@redhat.com> [BZ #3313] * malloc/malloc.c (malloc_consolidate): Set maxfb to address of last fastbin rather than end of fastbin array. 2006-10-18 Ulrich Drepper <drepper@redhat.com> * sysdeps/i386/i486/bits/atomic.h (catomic_decrement): Use correct body macro. * sysdeps/x86_64/bits/atomic.h (__arch_c_compare_and_exchange_val_64_acq): Add missing casts. (catomic_decrement): Use correct body macro. 2006-10-17 Jakub Jelinek <jakub@redhat.com> * include/atomic.h: Add a unique prefix to all local variables in macros. * csu/tst-atomic.c (do_test): Test also catomic_* macros. 2006-10-14 Ulrich Drepper <drepper@redhat.com> * resolv/arpa/nameser.h: Document that ns_t_a6 is deprecated. [BZ #3313] * malloc/malloc.c (malloc_consolidate): Don't use get_fast_max to determine highest fast bin to consolidate, always look into all of them. (do_check_malloc_state): Only require for empty bins for large sizes in main arena. * libio/stdio.h: Add more __wur attributes. 2006-11-12 Andreas Jaeger <aj@suse.de> [BZ #2510] * manual/search.texi (Hash Search Function): Clarify. (Array Search Function): Clarify. 2006-11-12 Joseph Myers <joseph@codesourcery.com> [BZ #2830] * math/atest-exp.c (main): Cast hex value to mp_limb_t before shifting. * math/atest-exp2.c (read_mpn_hex): Likewise. * math/atest-sincos.c (main): Likewise. * sysdeps/unix/sysv/linux/syscalls.list: Add epoll_pwait. * sysdeps/unix/sysv/linux/sys/epoll.h: Declare epoll_pwait. * sysdeps/unix/sysv/linux/Versions (libc): Add epoll_pwait for version GLIBC_2.6. * Versions.def: Add GLIBC_2.6 for libc. * sysdeps/i386/i486/bits/atomic.h: Add catomic_* support. 2006-10-11 Jakub Jelinek <jakub@redhat.com> * malloc/malloc.c (_int_malloc): Remove unused any_larger variable. * nis/nis_defaults.c (__nis_default_access): Don't call getenv twice. * nis/nis_subr.c (nis_getnames): Use __secure_getenv instead of getenv. * sysdeps/generic/unsecvars.h: Add NIS_PATH. 2006-10-11 Ulrich Drepper <drepper@redhat.com> * include/atomic.c: Define catomic_* operations. * sysdeps/x86_64/bits/atomic.h: Likewise. Fix a few minor problems. * stdlib/cxa_finalize.c: Use catomic_* operations instead of atomic_*. * malloc/memusage.c: Likewise. * gmon/mcount.c: Likewise. * elf/dl-close.c: Likewise. * elf/dl-open.c: Likewise. * elf/dl-profile.c: Likewise. * elf/dl-sym.c: Likewise. * elf/dl-runtime.c: Likewise. * elf/dl-fptr.c: Likewise. * resolv/res_libc.c: Likewise. 2006-10-10 Roland McGrath <roland@frob.com> * sysdeps/mach/hurd/utimes.c: Use a union to avoid an improper cast. * sysdeps/mach/hurd/futimes.c: Likewise. * sysdeps/mach/hurd/lutimes.c: Likewise. 2006-10-09 Ulrich Drepper <drepper@redhat.com> Jakub Jelinek <jakub@redhat.com> Implement reference counting of scope records. * elf/dl-close.c (_dl_close): Remove all scopes from removed objects from the list in objects which remain. Always allocate new scope record. * elf/dl-open.c (dl_open_worker): When growing array for scopes, don't resize, allocate a new one. * elf/dl-runtime.c: Update reference counters before using a scope array. * elf/dl-sym.c: Likewise. * elf/dl-libc.c: Adjust for l_scope name change. * elf/dl-load.c: Likewise. * elf/dl-object.c: Likewise. * elf/rtld.c: Likewise. * include/link.h: Include <rtld-lowlevel.h>. Define struct r_scoperec. Replace r_scope with pointer to r_scoperec structure. Add l_scoperec_lock. * sysdeps/generic/ldsodefs.h: Include <rtld-lowlevel.h>. * sysdeps/generic/rtld-lowlevel.h: New file. * include/atomic.h: Rename atomic_and to atomic_and_val and atomic_or to atomic_or_val. Define new macros atomic_and and atomic_or which do not return values. * sysdeps/x86_64/bits/atomic.h: Define atomic_and and atomic_or. Various cleanups. * sysdeps/i386/i486/bits/atomic.h: Likewise. * po/sv.po: Update from translation team. 2006-10-07 Ulrich Drepper <drepper@redhat.com> * Versions.def: Add GLIBC_2.6 to libpthread. * include/shlib-compat.h (SHLIB_COMPAT): Expand parameters before use. (versioned_symbol): Likewise. (compat_symbol): Likewise. * po/tr.po: Update from translation team. * nis/Banner: Removed. It's been integral part forever and the author info is incomplete anyway. * libio/Banner: Likewise. 2006-10-06 Ulrich Drepper <drepper@redhat.com> * version.h (VERSION): Bump to 2.5.90 for new development tree.
2007-07-31.Jakub Jelinek1-6/+5
2006-12-13[BZ #2337]Ulrich Drepper1-7/+4
2006-12-13 Ulrich Drepper <drepper@redhat.com> [BZ #2337] * libio/Makefile (tests): Add tst-setvbuf1. * libio/tst-setvbuf1.c: New file. 2006-12-08 Jakub Jelinek <jakub@redhat.com> [BZ #2337] * libio/genops.c (__uflow): Fix a typo. * libio/wfiledoalloc.c (_IO_wfile_doallocate): Don't stat nor set _IO_LINE_BUF bit here. Size the wide buffer based on the narrow buffer size. 2006-11-24 Jakub Jelinek <jakub@redhat.com> [BZ #2337] * libio/libio.h (_IO_FLAGS2_USER_WBUF): Define. * libio/wgenops.c (_IO_wsetb, _IO_wdefault_finish): Test and set _IO_FLAGS2_USER_WBUF bit in _flags2 instead of _IO_USER_BUF bit in _flags. * libio/wstrops.c (_IO_wstr_overflow, enlarge_userbuf, _IO_wstr_finish): Likewise. * libio/wmemstream.c (open_wmemstream): Likewise. * libio/fileops.c (_IO_new_file_close_it): Call _IO_set[bgp] even for wide streams.
2006-01-19(_IO_new_file_fopen): If ,ccs= is given, also set vtable to the wide vtable.Ulrich Drepper1-1/+4
2005-09-27[BZ #1078]Ulrich Drepper1-2/+4
2005-09-27 Ulrich Drepper <drepper@redhat.com> [BZ #1078] * libio/fileops.c (_IO_new_file_xsputn): Determine amount of available space in non-line-buffered buffer correctly. * libio/oldfileops.c (_IO_old_file_xsputn): Likewise. * stdio-common/Makefile (tests): Add tst-fwrite. * stdio-common/tst-fwrite.c: New file.
2005-09-04* stdio-common/Makefile (tests): Add tst-put-error.Ulrich Drepper1-4/+6
* stdio-common/tst-put-error.c: New file. * libio/fileops.c (_IO_new_file_xsputn): If overflow fails and no more data would have to be written signal error. * libio/oldfileops.c (_IO_old_file_xsputn): Likewise. * libio/fileops.c (_IO_new_file_overflow): Use NULL not 0.
2004-12-22(CFLAGS-tst-align.c): Add -mpreferred-stack-boundary=4.Ulrich Drepper1-21/+18
2007-07-122.5-18.1Jakub Jelinek1-18/+21
generated by cgit v1.1 at 2024-11-26 07:49:20 +0000