| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The 73fc4e28b9464f0e refactor did not add the GL(dl_phdr) and
GL(dl_phnum) for static build, relying on the __ehdr_start symbol,
which is always added by the static linker, to get the correct values.
This is problematic in some ways:
- The segment may see its in-memory size differ from its in-file
size (or the binary may have holes). The Linux has fixed is to
provide concise values for both AT_PHDR and AT_PHNUM (commit
0da1d5002745c - "fs/binfmt_elf: Fix AT_PHDR for unusual ELF files")
- Some archs (alpha for instance) the hidden weak reference is not
correctly pulled by the static linker and __ehdr_start address
end up being 0, which makes GL(dl_phdr) and GL(dl_phnum) have both
invalid values (and triggering a segfault later on libc.so while
accessing TLS variables).
The safer fix is to just restore the previous behavior to setup
GL(dl_phdr) and GL(dl_phnum) for static based on kernel auxv. The
__ehdr_start fallback can also be simplified by not assuming weak
linkage (as for PIE).
The libc-static.c auxv init logic is moved to dl-support.c, since
the later is build without SHARED and then GLRO macro is defined
to access the variables directly.
The _dl_phdr is also assumed to be always non NULL, since an invalid
NULL values does not trigger TLS initialization (which is used in
various libc systems).
Checked on aarch64-linux-gnu, x86_64-linux-gnu, and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
|
|
This makes it more likely that the compiler can compute the strlen
argument in _startup_fatal at compile time, which is required to
avoid a dependency on strlen this early during process startup.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
|
|
For instance on x86_64 with gcc 12.1.1 andwith fstack-protector
enabled the empty function still generates a stack protector code
sequence:
0000000000000000 <_dl_relocate_static_pie>:
0: 48 83 ec 18 sub $0x18,%rsp
4: 64 48 8b 04 25 28 00 mov %fs:0x28,%rax
b: 00 00
d: 48 89 44 24 08 mov %rax,0x8(%rsp)
12: 31 c0 xor %eax,%eax
14: 48 8b 44 24 08 mov 0x8(%rsp),%rax
19: 64 48 2b 04 25 28 00 sub %fs:0x28,%rax
20: 00 00
22: 75 05 jne 29 <_dl_relocate_static_pie+0x29>
24: 48 83 c4 18 add $0x18,%rsp
28: c3 ret
29: e8 00 00 00 00 call 2e <_dl_relocate_static_pie+0x2e>
And since the function is called prior thread pointer setup, it
triggers a invalid memory access (this is shown with the failure
of elf/tst-tls1-static-non-pie).
Although it might characterizes as compiler issue or missed
optimization, to be safe also disables stack protector on
static-reloc object.
Checked on x86_64-linux-gnu and sparc64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
The kernel version check is used to avoid glibc to run on older
kernels where some syscall are not available and fallback code are
not enabled to handle graciously fail. However, it does not prevent
if the kernel does not correctly advertise its version through
vDSO note, uname or procfs.
Also kernel version checks are sometime not desirable by users,
where they want to deploy on different system with different kernel
version knowing the minimum set of syscall is always presented on
such systems.
The kernel version check has been removed along with the
LD_ASSUME_KERNEL environment variable. The minimum kernel used to
built glibc is still provided through NT_GNU_ABI_TAG ELF note and
also printed when libc.so is issued.
Checked on x86_64-linux-gnu.
|
|
This implements mmap fallback for a brk failure during TLS
allocation.
scripts/tls-elf-edit.py is updated to support the new patching method.
The script no longer requires that in the input object is of ET_DYN
type.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
After 73fc4e28b9464f0e13edc719a5372839970e7ddb,
__libc_enable_secure_decided is always 0 and a statically linked
executable may overwrite __libc_enable_secure without considering
AT_SECURE.
The __libc_enable_secure has been correctly initialized in _dl_aux_init,
so just remove __libc_enable_secure_decided and __libc_init_secure.
This allows us to remove some startup_get*id functions from
22b79ed7f413cd980a7af0cf258da5bf82b6d5e5.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
|
|
It consolidates the code required to call la_preinit audit
callback.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
This fixes [BZ #28671].
|
|
TLS_INIT_TCB_ALIGN is not actually used. TLS_TCB_ALIGN was likely
introduced to support a configuration where the thread pointer
has not the same alignment as THREAD_SELF. Only ia64 seems to use
that, but for the stack/pointer guard, not for storing tcbhead_t.
Some ports use TLS_TCB_OFFSET and TLS_PRE_TCB_SIZE to shift
the thread pointer, potentially landing in a different residue class
modulo the alignment, but the changes should not impact that.
In general, given that TLS variables have their own alignment
requirements, having different alignment for the (unshifted) thread
pointer and struct pthread would potentially result in dynamic
offsets, leading to more complexity.
hppa had different values before: __alignof__ (tcbhead_t), which
seems to be 4, and __alignof__ (struct pthread), which was 8
(old default) and is now 32. However, it defines THREAD_SELF as:
/* Return the thread descriptor for the current thread. */
# define THREAD_SELF \
({ struct pthread *__self; \
__self = __get_cr27(); \
__self - 1; \
})
So the thread pointer points after struct pthread (hence __self - 1),
and they have to have the same alignment on hppa as well.
Similarly, on ia64, the definitions were different. We have:
# define TLS_PRE_TCB_SIZE \
(sizeof (struct pthread) \
+ (PTHREAD_STRUCT_END_PADDING < 2 * sizeof (uintptr_t) \
? ((2 * sizeof (uintptr_t) + __alignof__ (struct pthread) - 1) \
& ~(__alignof__ (struct pthread) - 1)) \
: 0))
# define THREAD_SELF \
((struct pthread *) ((char *) __thread_self - TLS_PRE_TCB_SIZE))
And TLS_PRE_TCB_SIZE is a multiple of the struct pthread alignment
(confirmed by the new _Static_assert in sysdeps/ia64/libc-tls.c).
On m68k, we have a larger gap between tcbhead_t and struct pthread.
But as far as I can tell, the port is fine with that. The definition
of TCB_OFFSET is sufficient to handle the shifted TCB scenario.
This fixes commit 23c77f60181eb549f11ec2f913b4270af29eee38
("nptl: Increase default TCB alignment to 32").
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
Current binutils defines __executable_start as the lowest text
address, so using the entry point address as a fallback is no
longer necessary. As a result, overriding <entry.h> is only
necessary if the entry point is not called _start.
The previous approach to define __ASSEMBLY__ to suppress the
declaration breaks if headers included by <entry.h> are not
compatible with __ASSEMBLY__. This happens with rseq integration
because it is necessary to include kernel headers in more places.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
|
|
Glibc does not provide an interface for debugger to access libraries
loaded in multiple namespaces via dlmopen.
The current rtld-debugger interface is described in the file:
elf/rtld-debugger-interface.txt
under the "Standard debugger interface" heading. This interface only
provides access to the first link-map (LM_ID_BASE).
1. Bump r_version to 2 when multiple namespaces are used. This triggers
the GDB bug:
https://sourceware.org/bugzilla/show_bug.cgi?id=28236
2. Add struct r_debug_extended to extend struct r_debug into a linked-list,
where each element correlates to an unique namespace.
3. Initialize the r_debug_extended structure. Bump r_version to 2 for
the new namespace and add the new namespace to the namespace linked list.
4. Add _dl_debug_update to return the address of struct r_debug' of a
namespace.
5. Add a hidden symbol, _r_debug_extended, for struct r_debug_extended.
6. Provide the symbol, _r_debug, with size of struct r_debug, as an alias
of _r_debug_extended, for programs which reference _r_debug.
This fixes BZ #15971.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
|
|
Glibc assumes that ENTRY_POINT is the lowest address for which we need
to keep profiling records and BFD linker uses a linker script to place
the input sections.
Starting from GCC 4.6, the main function is placed in .text.startup
section and starting from binutils 2.22, BFD linker with
commit add44f8d5c5c05e08b11e033127a744d61c26aee
Author: Alan Modra <amodra@gmail.com>
Date: Thu Nov 25 03:03:02 2010 +0000
* scripttempl/elf.sc: Group .text.exit, text.startup and .text.hot
sections.
places .text.startup section before .text section, which leave the main
function out of profiling records.
Starting from binutils 2.15, linker provides __executable_start to mark
the lowest address of the executable. Use __executable_start as the
lowest address to keep the main function in profiling records. This fixes
[BZ #28153].
Tested on Linux/x86-64, Linux/x32 and Linux/i686 as well as with
build-many-glibcs.py.
|
|
As a result, is not necessary to specify __attribute__ ((nocommon))
on individual definitions.
GCC 10 defaults to -fno-common on all architectures except ARC,
but this change is compatible with older GCC versions and ARC, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
For the legacy ABI with supports 32-bit time_t it calls the 64-bit
time directly, since the LFS symbols calls the 64-bit time_t ones
internally.
Checked on i686-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
No function change. The code is used only for Linux, besides
being included in generic code.
|
|
This is an early variant of __tls_init_tp, primarily for initializing
thread-related elements of _rtld_global/GL.
Some existing initialization code not needed for NPTL is moved into
the generic version of this function.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
TLS_INIT_TP is processor-specific, so it is not a good place to
put thread library initialization code (it would have to be repeated
for all CPUs). Introduce __tls_init_tp as a separate function,
to be called immediately after TLS_INIT_TP. Move the existing
stack list setup code for NPTL to this function.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This code depends on whether glibc has unwinding support for
a particular port.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
This does not change the emitted code since __libc_start_main does not
return, but is important for formal flags compliance.
This also cleans up the cosmetic inconsistency in the stack protector
flags in csu, especially the incorrect value of STACK_PROTECTOR_LEVEL.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
It turns out the startup code in csu/elf-init.c has a perfect pair of
ROP gadgets (see Marco-Gisbert and Ripoll-Ripoll, "return-to-csu: A
New Method to Bypass 64-bit Linux ASLR"). These functions are not
needed in dynamically-linked binaries because DT_INIT/DT_INIT_ARRAY
are already processed by the dynamic linker. However, the dynamic
linker skipped the main program for some reason. For maximum
backwards compatibility, this is not changed, and instead, the main
map is consulted from __libc_start_main if the init function argument
is a NULL pointer.
For statically linked binaries, the old approach based on linker
symbols is still used because there is nothing else available.
A new symbol version __libc_start_main@@GLIBC_2.34 is introduced because
new binaries running on an old libc would not run their ELF
constructors, leading to difficult-to-debug issues.
|
|
IFUNC resolvers may depend on tunables and cpu feature setup so
move static pie self relocation after those.
It is hard to guarantee that the ealy startup code does not rely
on relocations so this is a bit fragile. It would be more robust
to handle RELATIVE relocs early and only IRELATIVE relocs later,
but the current relocation processing code cannot do that.
The early startup code up to relocation processing includes
_dl_aux_init (auxvec);
__libc_init_secure ();
__tunables_init (__environ);
ARCH_INIT_CPU_FEATURES ();
_dl_relocate_static_pie ();
These are simple enough that RELATIVE relocs can be avoided.
The following steps include
ARCH_SETUP_IREL ();
ARCH_SETUP_TLS ();
ARCH_APPLY_IREL ();
On some targets IRELATIVE processing relies on TLS setup on
others TLS setup relies on IRELATIVE relocs, so the right
position for _dl_relocate_static_pie is target dependent.
For now move self relocation as early as possible on targets
that support static PIE.
Fixes bug 27072.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Extern symbol access in position independent code usually involves GOT
indirection which needs RELATIVE reloc in a static linked PIE. (On
some targets this is avoided e.g. because the linker can relax a GOT
access to a pc-relative access, but this is not generally true.) Code
that runs before static PIE self relocation must avoid relying on
dynamic relocations which can be ensured by using hidden visibility.
However we cannot just make all symbols hidden:
On i386, all calls to IFUNC functions must go through PLT and calls to
hidden functions CANNOT go through PLT in PIE since EBX used in PIE PLT
may not be set up for local calls to hidden IFUNC functions.
This patch aims to make symbol references hidden in code that is used
before and by _dl_relocate_static_pie when building a static PIE libc.
Note: for an object that is used in the startup code, its references
and definition may not have consistent visibility: it is only forced
hidden in the startup code.
This is needed for fixing bug 27072.
Co-authored-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
All linkers support __ehdr_start that support static PIE linking,
so there is no need to check for its presence via a weak reference.
This avoids a RELATIVE relocation in static PIE startup code on some
targets.
With non-PIE static linking the weak ref check is kept in case the
linker does not support __ehdr_start.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 6694 files FOO.
I then removed trailing white space from benchtests/bench-pthread-locks.c
and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this
diagnostic from Savannah:
remote: *** pre-commit check failed ...
remote: *** error: lines with trailing whitespace found
remote: error: hook declined to update refs/heads/master
|
|
Change sbrk to fail for !__libc_initial (in the generic
implementation). As a result, sbrk is (relatively) safe to use
for the __libc_initial case (from the main libc). It is therefore
no longer necessary to avoid using it in that case (or updating the
brk cache), and the __libc_initial flag does not need to be updated
as part of dlmopen or static dlopen.
As before, direct brk system calls on Linux may lead to memory
corruption.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Now __thread_gscope_wait (the function behind THREAD_GSCOPE_WAIT,
formerly __wait_lookup_done) can be implemented directly in ld.so,
eliminating the unprotected GL (dl_wait_lookup_done) function
pointer.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
|
|
Building glibc with GCC 11 fails with (among other warnings) spurious
-Wstringop-overflow warnings from calls to setjmp and longjmp with a
pointer to a pthread_unwind_buf that is smaller than jmp_buf. As
discussed in bug 26647, the warning in libc-start.c is a false
positive, because setjmp and longjmp do not access anything (the
signal mask) beyond the common prefix of the two structures, so this
patch disables the warning for that call to setjmp, as well as for two
calls in NPTL code that produce the same warning and look like false
positives for the same reason.
Tested with build-many-glibcs.py for arm-linux-gnueabi, where this
allows the build to get further.
Reviewed-by: DJ Delorie <dj@redhat.com>
|
|
It replaces the internal usage of __{f,l}xstat{at}{64} with the
__{f,l}stat{at}{64}. It should not change the generate code since
sys/stat.h explicit defines redirections to internal calls back to
xstat* symbols.
Checked with a build for all affected ABIs. I also check on
x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
|
|
The kernel ABI is not finalized, and there are now various proposals
to change the size of struct rseq, which would make the glibc ABI
dependent on the version of the kernels used for building glibc.
This is of course not acceptable.
This reverts commit 48699da1c468543ade14777819bd1b4d652709de ("elf:
Support at least 32-byte alignment in static dlopen"), commit
8f4632deb3545b2949cec5454afc3cb21a0024ea ("Linux: rseq registration
tests"), commit 6e29cb3f61ff5432c78a1c84b0d9b123a350ab36 ("Linux: Use
rseq in sched_getcpu if available"), and commit
0c76fc3c2b346dc5401dc055d97d4279632b0fb3 ("Linux: Perform rseq
registration at C startup and thread creation"), resolving the conflicts
introduced by the ARC port and the TLS static surplus changes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Otherwise loading a dynamically linked libc with rseq support fails,
as result of the __rseq_abi TLS variable, which has an alignment
of 32 bytes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Vineet Gupta <vgupta@synopsys.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Alistair Francis <alistair.francis@wdc.com>
|
|
On some targets static TLS surplus area can be used opportunistically
for dynamically loaded modules such that the TLS access then becomes
faster (TLSDESC and powerpc TLS optimization). However we don't want
all surplus TLS to be used for this optimization because dynamically
loaded modules with initial-exec model TLS can only use surplus TLS.
The new contract for surplus static TLS use is:
- libc.so can have up to 192 bytes of IE TLS,
- other system libraries together can have up to 144 bytes of IE TLS.
- Some "optional" static TLS is available for opportunistic use.
The optional TLS is now tunable: rtld.optional_static_tls, so users
can directly affect the allocated static TLS size. (Note that module
unloading with dlclose does not reclaim static TLS. After the optional
TLS runs out, TLS access is no longer optimized to use static TLS.)
The default setting of rtld.optional_static_tls is 512 so the surplus
TLS is 3*192 + 4*144 + 512 = 1664 by default, the same as before.
Fixes BZ #25051.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
The new static TLS surplus size computation is
surplus_tls = 192 * (nns-1) + 144 * nns + 512
where nns is controlled via the rtld.nns tunable. This commit
accounts audit modules too so nns = rtld.nns + audit modules.
rtld.nns should only include the namespaces required by the
application, namespaces for audit modules are accounted on top
of that so audit modules don't use up the static TLS that is
reserved for the application. This allows loading many audit
modules without tuning rtld.nns or using up static TLS, and it
fixes
FAIL: elf/tst-auditmany
Note that DL_NNS is currently a hard upper limit for nns, and
if rtld.nns + audit modules go over the limit that's a fatal
error. By default rtld.nns is 4 which allows 12 audit modules.
Counting the audit modules is based on existing audit string
parsing code, we cannot use GLRO(dl_naudit) before the modules
are actually loaded.
|
|
TLS_STATIC_SURPLUS is 1664 bytes currently which is not enough to
support DL_NNS (== 16) number of dynamic link namespaces, if we
assume 192 bytes of TLS are reserved for libc use and 144 bytes
are reserved for other system libraries that use IE TLS.
A new tunable is introduced to control the number of supported
namespaces and to adjust the surplus static TLS size as follows:
surplus_tls = 192 * (rtld.nns-1) + 144 * rtld.nns + 512
The default is rtld.nns == 4 and then the surplus TLS size is the
same as before, so the behaviour is unchanged by default. If an
application creates more namespaces than the rtld.nns setting
allows, then it is not guaranteed to work, but the limit is not
checked. So existing usage will continue to work, but in the
future if an application creates more than 4 dynamic link
namespaces then the tunable will need to be set.
In this patch DL_NNS is a fixed value and provides a maximum to
the rtld.nns setting.
Static linking used fixed 2048 bytes surplus TLS, this is changed
so the same contract is used as for dynamic linking. With static
linking DL_NNS == 1 so rtld.nns tunable is forced to 1, so by
default the surplus TLS is reduced to 144 + 512 = 656 bytes. This
change is not expected to cause problems.
Tested on aarch64-linux-gnu and x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
Using C code allows the compiler to add target specific object file
markings based on CFLAGS.
The arm specific abi-note.S is removed and similar object file fix
up will be avoided on AArch64 with standard branch protection.
|
|
This was originally added to support binutils older than version
2.22:
<https://sourceware.org/ml/libc-alpha/2010-12/msg00051.html>
Since 2.22 is older than the minimum required binutils version
for building glibc, we no longer need this. (The changes do
not impact the statically linked startup code.)
|
|
The rseq initialization should happen only for the libc in the base
namespace (in the dynamic case) or the statically linked libc. The
__libc_multiple_libcs flag does not quite cover this case at present,
so this commit introduces a flag argument to __libc_early_init,
indicating whether the libc being libc is the primary one (of the main
program).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
This function is defined in libc.so, and the dynamic loader calls
right after relocation has been finished, before any ELF constructors
or the preinit function is invoked. It is also used in the static
build for initializing parts of the static libc.
To locate __libc_early_init, a direct symbol lookup function is used,
_dl_lookup_direct. It does not search the entire symbol scope and
consults merely a single link map. This function could also be used
to implement lookups in the vDSO (as an optimization).
A per-namespace variable (libc_map) is added for locating libc.so,
to avoid repeated traversals of the search scope. It is similar to
GL(dl_initfirst). An alternative would have been to thread a context
argument from _dl_open down to _dl_map_object_from_fd (where libc.so
is identified). This could have avoided the global variable, but
the change would be larger as a result. It would not have been
possible to use this to replace GL(dl_initfirst) because that global
variable is used to pass the function pointer past the stack switch
from dl_main to the main program. Replacing that requires adding
a new argument to _dl_init, which in turn needs changes to the
architecture-specific libc.so startup code written in assembler.
__libc_early_init should not be used to replace _dl_var_init (as
it exists today on some architectures). Instead, _dl_lookup_direct
should be used to look up a new variable symbol in libc.so, and
that should then be initialized from the dynamic loader, immediately
after the object has been loaded in _dl_map_object_from_fd (before
relocation is run). This way, more IFUNC resolvers which depend on
these variables will work.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
|
On !ELF_INITFINI architectures, _init is no longer called by the
dynamic linker. We can use an ELF constructor instead because the
constructor order does not matter. (The other constructors are used
to set up libio vtable bypasses and do not depend on this
initialization routine.)
|
|
This supersedes the init_array sysdeps directory. It allows us to
check for ELF_INITFINI in both C and assembler code, and skip DT_INIT
and DT_FINI processing completely on newer architectures.
A new header file is needed because <dl-machine.h> is incompatible
with assembler code. <sysdep.h> is compatible with assembler code,
but it cannot be included in all assembler files because on some
architectures, it redefines register names, and some assembler files
conflict with that.
<elf-initfini.h> is replicated for legacy architectures which need
DT_INIT/DT_FINI support. New architectures follow the generic default
and disable it.
|
|
This patch moves the vDSO setup from libc to loader code, just after
the vDSO link_map setup. For static case the initialization
is moved to _dl_non_dynamic_init instead.
Instead of using the mangled pointer, the vDSO data is set as
attribute_relro (on _rtld_global_ro for shared or _dl_vdso_* for
static). It is read-only even with partial relro.
It fixes BZ#24967 now that the vDSO pointer is setup earlier than
malloc interposition is called.
Also, vDSO calls should not be a problem for static dlopen as
indicated by BZ#20802. The vDSO pointer would be zero-initialized
and the syscall will be issued instead.
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
arm-linux-gnueabihf, powerpc64le-linux-gnu, powerpc64-linux-gnu,
powerpc-linux-gnu, s390x-linux-gnu, sparc64-linux-gnu, and
sparcv9-linux-gnu. I also run some tests on mips.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
|
|
I've updated copyright dates in glibc for 2020. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus libc.texinfo which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a fix to
sysdeps/unix/sysv/linux/powerpc/bits/termios-c_lflag.h where a typo in
the copyright notice meant it failed to be updated automatically.
Please remember to include 2020 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
|
|
|
|
To improve GCC 10 compatibility, it is necessary to remove the l_audit
zero-length array from the end of struct link_map. In preparation of
that, this commit introduces an accessor function for the audit state,
so that it is possible to change the representation of the audit state
without adjusting the code that accesses it.
Tested on x86_64-linux-gnu. Built on i686-gnu.
Change-Id: Id815673c29950fc011ae5301d7cde12624f658df
|
|
GCC 10 will warn about subscribing inner length zero arrays. Use a GCC
extension in csu/libc-tls.c to allocate space for the static_slotinfo
variable. Adjust nptl_db so that the type description machinery does
not attempt to determine the size of the flexible array member slotinfo.
Change-Id: I51be146a7857186a4ede0bb40b332509487bdde8
|
|
Also, change sources.redhat.com to sourceware.org.
This patch was automatically generated by running the following shell
script, which uses GNU sed, and which avoids modifying files imported
from upstream:
sed -ri '
s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g
s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g
' \
$(find $(git ls-files) -prune -type f \
! -name '*.po' \
! -name 'ChangeLog*' \
! -path COPYING ! -path COPYING.LIB \
! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \
! -path manual/texinfo.tex ! -path scripts/config.guess \
! -path scripts/config.sub ! -path scripts/install-sh \
! -path scripts/mkinstalldirs ! -path scripts/move-if-change \
! -path INSTALL ! -path locale/programs/charmap-kw.h \
! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \
! '(' -name configure \
-execdir test -f configure.ac -o -f configure.in ';' ')' \
! '(' -name preconfigure \
-execdir test -f preconfigure.ac ';' ')' \
-print)
and then by running 'make dist-prepare' to regenerate files built
from the altered files, and then executing the following to cleanup:
chmod a+x sysdeps/unix/sysv/linux/riscv/configure
# Omit irrelevant whitespace and comment-only changes,
# perhaps from a slightly-different Autoconf version.
git checkout -f \
sysdeps/csky/configure \
sysdeps/hppa/configure \
sysdeps/riscv/configure \
sysdeps/unix/sysv/linux/csky/configure
# Omit changes that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines
git checkout -f \
sysdeps/powerpc/powerpc64/ppc-mcount.S \
sysdeps/unix/sysv/linux/s390/s390-64/syscall.S
# Omit change that caused a pre-commit check to fail like this:
# remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline
git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
|
|
I've updated copyright dates in glibc for 2019. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files.
Please remember to include 2019 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
* NEWS: Update copyright dates.
* catgets/gencat.c (print_version): Likewise.
* csu/version.c (banner): Likewise.
* debug/catchsegv.sh: Likewise.
* debug/pcprofiledump.c (print_version): Likewise.
* debug/xtrace.sh (do_version): Likewise.
* elf/ldconfig.c (print_version): Likewise.
* elf/ldd.bash.in: Likewise.
* elf/pldd.c (print_version): Likewise.
* elf/sotruss.sh: Likewise.
* elf/sprof.c (print_version): Likewise.
* iconv/iconv_prog.c (print_version): Likewise.
* iconv/iconvconfig.c (print_version): Likewise.
* locale/programs/locale.c (print_version): Likewise.
* locale/programs/localedef.c (print_version): Likewise.
* login/programs/pt_chown.c (print_version): Likewise.
* malloc/memusage.sh (do_version): Likewise.
* malloc/memusagestat.c (print_version): Likewise.
* malloc/mtrace.pl: Likewise.
* manual/libc.texinfo: Likewise.
* nptl/version.c (banner): Likewise.
* nscd/nscd.c (print_version): Likewise.
* nss/getent.c (print_version): Likewise.
* nss/makedb.c (print_version): Likewise.
* posix/getconf.c (main): Likewise.
* scripts/test-installation.pl: Likewise.
* sysdeps/unix/sysv/linux/lddlibc4.c (main): Likewise.
|
|
* All files with FSF copyright notices: Update copyright dates
using scripts/update-copyrights.
* locale/programs/charmap-kw.h: Regenerated.
* locale/programs/locfile-kw.h: Likewise.
|
|
This does not change generated code (with -fstack-protector-strong), but
is important for formal compiler flags compliance.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
|
