aboutsummaryrefslogtreecommitdiff
path: root/config.make.in
AgeCommit message (Collapse)AuthorFilesLines
2021-05-03Add pthread-in-libc, libpthread-routines-var, librt-routines-varFlorian Weimer1-0/+1
These make variables can be used to add routines to different libraries for the Hurd and Linux builds. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
2021-01-11install: Replace scripts/output-format.sed with objdump -f [BZ #26559]Fangrui Song1-1/+0
GNU ld and gold have supported --print-output-format since 2011. glibc requires binutils>=2.25 (2015), so if LD is GNU ld or gold, we can assume the option is supported. lld is by default a cross linker supporting multiple targets. It auto detects the file format and does not need OUTPUT_FORMAT. It does not support --print-output-format. By parsing objdump -f, we can support all the three linkers. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
2020-12-21config: Allow memory tagging to be enabled when configuring glibcRichard Earnshaw1-0/+2
This patch adds the configuration machinery to allow memory tagging to be enabled from the command line via the configure option --enable-memory-tagging. The current default is off, though in time we may change that once the API is more stable.
2020-07-13Remove --enable-obsolete-rpc configure flagPetr Vorel1-1/+0
Sun RPC was removed from glibc. This includes rpcgen program, librpcsvc, and Sun RPC headers. Also test for bug #20790 was removed (test for rpcgen). Backward compatibility for old programs is kept only for architectures and ABIs that have been added in or before version 2.28. libtirpc is mature enough, librpcsvc and rpcgen are provided in rpcsvc-proto project. NOTE: libnsl code depends on Sun RPC (installed libnsl headers use installed Sun RPC headers), thus --enable-obsolete-rpc was a dependency for --enable-obsolete-nsl (removed in a previous commit). The arc ABI list file has to be updated because the port was added with the sunrpc symbols Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
2020-07-08Remove --enable-obsolete-nsl configure flagPetr Vorel1-1/+0
this means that *always* libnsl is only built as shared library for backward compatibility and the NSS modules libnss_nis and libnss_nisplus are not built at all, libnsl's headers aren't installed. This compatibility is kept only for architectures and ABIs that have been added in or before version 2.28. Replacement implementations based on TIRPC, which additionally support IPv6, are available from <https://github.com/thkukuk/>. This change does not affect libnss_compat which does not depended on libnsl since 2.27 and thus can be used without NIS. libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed libnsl headers use installed Sun RPC headers), which will be removed in the following commit.
2019-05-14Make --bindir effectiveAdhemerval Zanella1-0/+1
This allows sets a path using --bindir. Checked on x86_64-linux-gnu with a non-default --bindir and checked resulting installed binaries (pldd for instance). * config.make.in (bindir): New variable. Reviewed-by: DJ Delorie <dj@redhat.com>
2018-09-25Fix ifunc support with DT_TEXTREL segments (BZ#20480)Adhemerval Zanella1-0/+1
Currently, DT_TEXTREL is incompatible with IFUNC. When DT_TEXTREL or DF_TEXTREL is seen, the dynamic linker calls __mprotect on the segments with PROT_READ|PROT_WRITE before applying dynamic relocations. It leads to segfault when performing IFUNC resolution (which requires PROT_EXEC as well for the IFUNC resolver). This patch makes it call __mprotect with extra PROT_WRITE bit, which will keep the PROT_EXEC bit if exists, and thus fixes the segfault. FreeBSD rtld libexec/rtld-elf/rtld.c (reloc_textrel_prot) does the same. Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, sparc64-linux-gnu, sparcv9-linux-gnu, and armv8-linux-gnueabihf. Adam J. Richte <adam_richter2004@yahoo.com> Adhemerval Zanella <adhemerval.zanella@linaro.org> Fangrui Song <maskray@google.com> [BZ #20480] * config.h.in (CAN_TEXTREL_IFUNC): New define. * configure.ac: Add check if linker supports textrel relocation with ifunc. * elf/dl-reloc.c (_dl_relocate_object): Use all required flags on DT_TEXTREL segments, not only PROT_READ and PROT_WRITE. * elf/Makefile (ifunc-pie-tests): Add tst-ifunc-textrel. (CFLAGS-tst-ifunc-textrel.c): New rule. * elf/tst-ifunc-textrel.c: New file.
2018-08-17Add --with-nonshared-cflags option to configureFlorian Weimer1-0/+1
2018-06-29New configure option --disable-crypt.Zack Weinberg1-0/+1
Some Linux distributions are experimenting with a new, separately maintained and hopefully more agile implementation of the crypt API. To facilitate this, add a configure option which disables glibc's embedded libcrypt. When this option is given, libcrypt.* and crypt.h will not be built nor installed.
2017-12-18Pass -no-pie to GCC only if GCC defaults to PIE [BZ #22614]H.J. Lu1-0/+1
After --enable-static-pie is added to configure, libc_cv_pie_default is set to yes when either --enable-static-pie is used to configure glibc or GCC defaults to PIE. We should set no-pie-ldflag to -no-pie, which is supported on GCC 6 and later, only if GCC defaults to PIE, not when --enable-static-pie is used to configure glibc. Tested on x32 with --enable-static-pie using GCC 5 and without --enable-static-pie using GCC 7. [BZ #22614] * Makeconfig (no-pie-ldflag): Set to -no-pie only if $(cc-pie-default) == yes. * config.make.in (cc-pie-default): New. * configure.ac (libc_cv_pie_default): Renamed to ... (libc_cv_cc_pie_default): This. (libc_cv_pie_default): Set to $libc_cv_cc_pie_default. * configure: Regenerated.
2017-12-12Remove --with-fp / --without-fp.Joseph Myers1-1/+1
There is a configure option --without-fp that specifies that nofpu sysdeps directories should be used instead of fpu directories. For most glibc configurations, this option is of no use: either there is no valid nofpu variant of that configuration, or there are no fpu or nofpu sysdeps directories for that processor and so the option does nothing. For a few configurations, if you are using a soft-float compiler this option is required, and failing to use it generally results in compilation errors from inline asm using unavailable floating-point instructions. We're moving away from --with-cpu to configuring glibc based on how the compiler generates code, and it is natural to do so for --without-fp as well; in most cases the soft-float and hard-float ABIs are incompatible so you have no hope of building a working glibc with an inappropriately configured compiler or libgcc. This patch eliminates --without-fp, replacing it entirely by automatic configuration based on the compiler. Configurations for which this is relevant (coldfire / mips / powerpc32 / sh) define a variable with_fp_cond in their preconfigure fragments (under the same conditions under which those fragments do anything); this is a preprocessor conditional which the toplevel configure script then uses in a test to determine which sysdeps directories to use. The config.make with-fp variable remains. It's used only by powerpc (sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various flags variables. For powerpc, -mcpu= options can imply use of soft-float. That could be an issue if you want to build for e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp sysdeps directory. If in future we eliminate --with-cpu and replace it entirely by testing the compiler, it would be natural at that point to eliminate that code as well (as the user should then just use a compiler defaulting to 476fp and the 476 sysdeps directory would be used automatically). Tested for x86_64, and tested with build-many-glibcs.py that installed shared libraries are unchanged by this patch. * configure.ac (--with-fp): Remove configure option. (with_fp_cond): New variable. (libc_cv_with_fp): New configure test. Use this variable instead of with_fp. * configure: Regenerated. * config.make.in (with-fp): Use @libc_cv_with_fp@. * manual/install.texi (Configuring and compiling): Remove --without-fp. * INSTALL: Regenerated. * sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire. * sysdeps/mips/preconfigure (with_fp_cond): Define. * sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit. * sysdeps/sh/preconfigure (with_fp_cond): Define. * scripts/build-many-glibcs.py (Context.add_all_configs): Do not use --without-fp to configure glibc.
2017-12-05Add elision tunablesRogerio Alves1-1/+0
This patch adds several new tunables to control the behavior of elision on supported platforms[1]. Since elision now depends on tunables, we should always *compile* with elision enabled, and leave the code disabled, but available for runtime selection. This gives us *much* better compile-time testing of the existing code to avoid bit-rot[2]. Tested on ppc, ppc64, ppc64le, s390x and x86_64. [1] This part of the patch was initially proposed by Paul Murphy but was "staled" because the framework have changed since the patch was originally proposed: https://patchwork.sourceware.org/patch/10342/ [2] This part of the patch was inititally proposed as a RFC by Carlos O'Donnell. Make sense to me integrate this on the patch: https://sourceware.org/ml/libc-alpha/2017-05/msg00335.html * elf/dl-tunables.list: Add elision parameters. * manual/tunables.texi: Add entries about elision tunable. * sysdeps/unix/sysv/linux/powerpc/elision-conf.c: Add callback functions to dynamically enable/disable elision. Add multiple callbacks functions to set elision parameters. Deleted __libc_enable_secure check. * sysdeps/unix/sysv/linux/s390/elision-conf.c: Likewise. * sysdeps/unix/sysv/linux/x86/elision-conf.c: Likewise. * configure: Regenerated. * configure.ac: Option enable_lock_elision was deleted. * config.h.in: ENABLE_LOCK_ELISION flag was deleted. * config.make.in: Remove references to enable_lock_elision. * manual/install.texi: Elision configure option was removed. * INSTALL: Regenerated to remove enable_lock_elision. * nptl/Makefile: Disable elision so it can verify error case for destroying a mutex. * sysdeps/powerpc/nptl/elide.h: Cleanup ENABLE_LOCK_ELISION check. Deleted macros for the case when ENABLE_LOCK_ELISION was not defined. * sysdeps/s390/configure: Regenerated. * sysdeps/s390/configure.ac: Remove references to enable_lock_elision.. * nptl/tst-mutex8.c: Deleted all #ifndef ENABLE_LOCK_ELISION from the test. * sysdeps/powerpc/powerpc32/sysdep.h: Deleted all ENABLE_LOCK_ELISION checks. * sysdeps/powerpc/powerpc64/sysdep.h: Likewise. * sysdeps/powerpc/sysdep.h: Likewise. * sysdeps/s390/nptl/bits/pthreadtypes-arch.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/force-elision.h: Likewise. * sysdeps/unix/sysv/linux/s390/elision-conf.h: Likewise. * sysdeps/unix/sysv/linux/s390/force-elision.h: Likewise. * sysdeps/unix/sysv/linux/s390/lowlevellock.h: Likewise. * sysdeps/unix/sysv/linux/s390/Makefile: Remove references to enable-lock-elision. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
2017-11-06Use newly built crt*.o files to build shared objects [BZ #22362]H.J. Lu1-0/+1
When multi-lib GCC is used to build glibc, the search order of GCC driver for crt*.o is -B*/`gcc -print-multi-directory`, the installed diretory, -B*/. This patch adds multi-lib support to csu/Makefile so that -B/glibc-build-directory/csu/ will pick up the newly built crt*.o. Tested on x86-64 for i686 and x32. [BZ #22362] * Makerules (make-link-multidir): New. * config.make.in (multidir): New. * configure.ac (libc_cv_multidir): New. AC_SUBST. * configure: Regenerated. * csu/Makefile [$(multidir) != .](multilib-extra-objs): New. [$(multidir) != .](extra-objs): Add $(multilib-extra-objs). [$(multidir) != .]($(addprefix $(objpfx)$(multidir)/, $(install-lib))): New target.
2017-10-05Remove add-ons mechanism.Joseph Myers1-3/+0
glibc has an add-ons mechanism to allow additional software to be integrated into the glibc build. Such add-ons may be within the glibc source tree, or outside it at a path passed to the --enable-add-ons configure option. localedata and crypt were once add-ons, distributed in separate release tarballs, but long since stopped using that mechanism. Linuxthreads was always an add-on. Ports spent some time as an add-on with separate release tarballs, then was first moved into the glibc source tree, then had its sysdeps files moved into the main sysdeps hierarchy so the add-ons mechanism was no longer used. NPTL spent some time as an add-on in the main glibc tree before stopping using the add-on mechanism. libidn used to have separate release tarballs but no longer does so, but still uses the add-ons mechanism within the glibc source tree. Various other software has supported building with the add-ons mechanism at times in the past, but I don't think any is still widely used. Add-ons involve significant, little-used complexity in the glibc build system, and make it hard to understand what the space of possible glibc configurations is. This patch removes the add-ons mechanism. libidn is now built via the Subdirs mechanism to cause any configuration using sysdeps/unix/inet to build libidn; HAVE_LIBIDN (which effectively means shared libraries are available) is now defined via sysdeps/unix/inet/configure. Various references to add-ons around the source tree are removed (in the case of maint.texi, the example list of sysdeps directories is still very out of date). Externally maintained ports should now put their files in the normal sysdeps directory structure rather than being arranged as add-ons; they probably need to change e.g. elf.h anyway, rather than actually being able to work just as a drop-in subtree. Hurd libpthread should be arranged similarly to NPTL, so some files might go in a hurd-pthreads (or similar) top-level directory in glibc, while sysdeps files should go in the normal sysdeps directory structure (possibly in hurd or hurd-pthreads subdirectories, just as there are nptl subdirectories in the sysdeps tree). Tested for x86_64, and with build-many-glibcs.py. * configure.ac (--enable-add-ons): Remove option. (machine): Do not mention add-ons in comment. (LIBC_PRECONFIGURE): Likewise. (add_ons): Remove variable and sanity checks and logic to locate add-ons. (add_ons_automatic): Remove variable. (configured_add_ons): Likewise. (add_ons_sfx): Likewise. (add_ons_pfx): Likewise. (add_on_subdirs): Likewise. (sysnames_add_ons): Likewise. Remove loop over add-ons and consideration of add-ons in Implies handling. (sysdeps_add_ons): Likewise. * configure: Regenerated. * libidn/configure.ac: Remove. * libidn/configure: Likewise. * sysdeps/unix/inet/configure.ac: New file. * sysdeps/unix/inet/configure: New generated file. * sysdeps/unix/inet/Subdirs: Add libidn. * Makeconfig (sysdeps-srcdirs): Remove variable. (+sysdep_dirs): Do not include $(sysdeps-srcdirs). ($(common-objpfx)config.status): Do not depend on add-on files. ($(common-objpfx)shlib-versions.v.i): Do not mention add-ons in comment. (all-subdirs): Do not include $(add-on-subdirs). * Makefile (dist-prepare): Do not use $(sysdeps-add-ons). * config.make.in (add-ons): Remove variable. (add-on-subdirs): Likewise. (sysdeps-add-ons): Likewise. * manual/Makefile (add-chapters): Remove. ($(objpfx)texis): Do not depend on $(add-chapters). (nonexamples): Do not handle $(add-chapters). (examples): Do not handle $(add-ons). (chapters.% top-menu.%): Do not pass '$(add-chapters)' to libc-texinfo.sh. * manual/install.texi (Installation): Do not mention add-ons. (--enable-add-ons): Do not document configure option. * INSTALL: Regenerated. * manual/libc-texinfo.sh: Do not handle $2 add-ons argument. * manual/maint.texi (Hierarchy Conventions): Do not mention add-ons. * scripts/build-many-glibcs.py (Glibc.build_glibc): Do not use --enable-add-ons. * scripts/gen-sorted.awk: Do not handle Subdirs files from add-ons. * scripts/test-installation.pl: Do not handle glibc-compat add-on. * sysdeps/nptl/Makeconfig: Do not mention add-ons in comment.
2017-08-15gmon: Add test for basic mcount/gprof functionalityFlorian Weimer1-0/+1
2017-08-04Check linker support for INSERT in linker scriptH.J. Lu1-0/+1
Since gold doesn't support INSERT in linker script: https://sourceware.org/bugzilla/show_bug.cgi?id=21676 tst-split-dynreloc fails to link with gold. Check if linker supports INSERT in linker script before using it. * config.make.in (have-insert): New. * configure.ac (libc_cv_insert): New. Set to yes if linker supports INSERT in linker script. (AC_SUBST(libc_cv_insert): New. * configure: Regenerated. * sysdeps/x86_64/Makefile (tests): Add tst-split-dynreloc only if $(have-insert) == yes.
2017-07-06Add per-thread cache to mallocDJ Delorie1-0/+2
* config.make.in: Enable experimental malloc option. * configure.ac: Likewise. * configure: Regenerate. * manual/install.texi: Document it. * INSTALL: Regenerate. * malloc/Makefile: Likewise. * malloc/malloc.c: Add per-thread cache (tcache). (tcache_put): New. (tcache_get): New. (tcache_thread_freeres): New. (tcache_init): New. (__libc_malloc): Use cached chunks if available. (__libc_free): Initialize tcache if needed. (__libc_realloc): Likewise. (__libc_calloc): Likewise. (_int_malloc): Prefill tcache when appropriate. (_int_free): Likewise. (do_set_tcache_max): New. (do_set_tcache_count): New. (do_set_tcache_unsorted_limit): New. * manual/probes.texi: Document new probes. * malloc/arena.c: Add new tcache tunables. * elf/dl-tunables.list: Likewise. * manual/tunables.texi: Document them. * NEWS: Mention the per-thread cache.
2017-06-13Make copy of <bits/std_abs.h> from GCC 7 [BZ #21573]H.J. Lu1-0/+1
<bits/std_abs.h> from GCC 7 will include /usr/include/stdlib.h from "#include_next" (instead of stdlib/stdlib.h in the glibc source directory), and this turns up as a make dependency. Also make a copy of <bits/std_abs.h> to prevent it from including /usr/include/stdlib.h. [BZ #21573] * Makerules [$(c++-bits-std_abs-h) != ""] (before-compile): Add $(common-objpfx)bits/std_abs.h. [$(c++-bits-std_abs-h) != ""] ($(common-objpfx)bits/std_abs.h): New target. * config.make.in (c++-bits-std_abs-h): New. * configure.ac (find_cxx_header): Use "\,$1," with sed. (CXX_BITS_STD_ABS_H): New. (AC_SUBST(CXX_BITS_STD_ABS_H)): Likewise. * configure: Regenerated.
2017-03-21Deprecate libnsl by default (only shared library will beThorsten Kukuk1-0/+1
build for backward compatibility, no linking possible) and disable building of libnss_compat, libnss_nis and libnss_nisplus, except --enable-obsolete-nsl option is given to configure. * config.h.in: Add LINK_OBSOLETE_NSL. * config.make.in: Add build-obsolete-nsl. * configure.ac: Add obsolete-nsl option. * include/libc-symbols.h: Define libnsl_hidden_nolink_def. * include/rpcsvc/yp.h: Add missing functions as libnsl_hidden_proto. * include/rpcsvc/nislib.h: Likewise. * include/rpcsvc/ypclnt.h: Likewise. * manual/install.texi: Document --enable-obsolete-nsl. * nis/Makefile: Build only libnsl by default (add build-obsolete-nsl). * nis/nis_add.c: Replace libnsl_hidden_def with libnsl_hidden_nolink_def. * nis/nis_addmember.c: Likewise. * nis/nis_call.c: Likewise. * nis/nis_clone_obj.c: Likewise. * nis/nis_defaults.c: Likeise. * nis/nis_domain_of_r.c: Likewise. * nis/nis_error.c: Likewise. * nis/nis_file.c: Likewise. * nis/nis_free.c: Likewise. * nis_local_names.c: Likewise. * nis/nis_lookup.c: Likewise. * nis/nis_modify.c: Likewise. * nis/nis_print.c: Likewise. * nis/nis_remove.c: Likewise. * nis/nis_table.c: Likewise. * nis/nis_util.c: Likewise. * nis/nis_xdr.c: Likewise. * nis/yp_xdr.c: Likewise. * nis/ypclnt.c: Likewise. * nis/ypupdate_xdr.c: Likewise. * nis/nis_checkpoint.c: Add libnsl_hidden_nolink_def to all functions. * nis/nis_clone_dir.c: Likewise. * nis/nis_clone_res.c: Likewise. * nis/nis_creategroup.c: Likewise. * nis/nis_destroygroup.c: Likewise. * nis/nis_domain_of.c: Likewise. * nis/nis_getservlist.c: Likewise. * nis/nis_ismember.c: Likewise. * nis/nis_mkdir.c: Likewise. * nis/nis_ping.c: Likewise. * nis/nis_print_group_entry.c: Likewise. * nis/nis_removemember.c: Likewise. * nis/nis_rmdir.c: Likewise. * nis/nis_server.c: Likewise. * nis/nis_subr.c: Likewise. * nis/nis_verifygroup.c: Likewise. Signed-off-by: Thorsten Kukuk <kukuk@suse.com>
2016-12-31Initialize tunable list with the GLIBC_TUNABLES environment variableSiddhesh Poyarekar1-0/+1
Read tunables values from the users using the GLIBC_TUNABLES environment variable. The value of this variable is a colon-separated list of name=value pairs. So a typical string would look like this: GLIBC_TUNABLES=glibc.malloc.mmap_threshold=2048:glibc.malloc.trim_threshold=1024 * config.make.in (have-loop-to-function): Define. * elf/Makefile (CFLAGS-dl-tunables.c): Add -fno-tree-loop-distribute-patterns. * elf/dl-tunables.c: Include libc-internals.h. (GLIBC_TUNABLES): New macro. (tunables_strdup): New function. (parse_tunables): New function. (min_strlen): New function. (__tunables_init): Use the new functions and macro. (disable_tunable): Disable tunable from GLIBC_TUNABLES. * malloc/tst-malloc-usable-tunables.c: New test case. * malloc/tst-malloc-usable-static-tunables.c: New test case. * malloc/Makefile (tests, tests-static): Add tests.
2016-12-31Add framework for tunablesSiddhesh Poyarekar1-0/+1
The tunables framework allows us to uniformly manage and expose global variables inside glibc as switches to users. tunables/README has instructions for glibc developers to add new tunables. Tunables support can be enabled by passing the --enable-tunables configure flag to the configure script. This patch only adds a framework and does not pose any limitations on how tunable values are read from the user. It also adds environment variables used in malloc behaviour tweaking to the tunables framework as a PoC of the compatibility interface. * manual/install.texi: Add --enable-tunables option. * INSTALL: Regenerate. * README.tunables: New file. * Makeconfig (CPPFLAGS): Define TOP_NAMESPACE. (before-compile): Generate dl-tunable-list.h early. * config.h.in: Add HAVE_TUNABLES. * config.make.in: Add have-tunables. * configure.ac: Add --enable-tunables option. * configure: Regenerate. * csu/init-first.c (__libc_init_first): Move __libc_init_secure earlier... * csu/init-first.c (LIBC_START_MAIN):... to here. Include dl-tunables.h, libc-internal.h. (LIBC_START_MAIN) [!SHARED]: Initialize tunables for static binaries. * elf/Makefile (dl-routines): Add dl-tunables. * elf/Versions (ld): Add __tunable_set_val to GLIBC_PRIVATE namespace. * elf/dl-support (_dl_nondynamic_init): Unset MALLOC_CHECK_ only when !HAVE_TUNABLES. * elf/rtld.c (process_envvars): Likewise. * elf/dl-sysdep.c [HAVE_TUNABLES]: Include dl-tunables.h (_dl_sysdep_start): Call __tunables_init. * elf/dl-tunable-types.h: New file. * elf/dl-tunables.c: New file. * elf/dl-tunables.h: New file. * elf/dl-tunables.list: New file. * malloc/tst-malloc-usable-static.c: New test case. * malloc/Makefile (tests-static): Add it. * malloc/arena.c [HAVE_TUNABLES]: Include dl-tunables.h. Define TUNABLE_NAMESPACE. (DL_TUNABLE_CALLBACK (set_mallopt_check)): New function. (DL_TUNABLE_CALLBACK_FNDECL): New macro. Use it to define callback functions. (ptmalloc_init): Set tunable values. * scripts/gen-tunables.awk: New file. * sysdeps/mach/hurd/dl-sysdep.c: Include dl-tunables.h. (_dl_sysdep_start): Call __tunables_init.
2016-12-26Disable stack protector in early static initialization [BZ #7065]Nick Alcock1-0/+2
The startup code in csu/, and the brk and sbrk functions are needed very early in initialization of a statically-linked program, before the stack guard is initialized; TLS initialization also uses memcpy, which cannot overrun its own stack. Mark all of these as -fno-stack-protector. We also finally introduce @libc_cv_ssp@ and @no_stack_protector@, both substituted by the configury changes made earlier, to detect the case when -fno-stack-protector is supported by the compiler, and unconditionally pass it in when this is the case, whether or not --enable-stack-protector is passed to configure. (This means that it'll even work when the compiler's been hacked to pass -fstack-protector by default, unless the hackage is so broken that it does so in a way that is impossible to override.)
2016-12-22Add configure check for python programSiddhesh Poyarekar1-0/+1
Add a configure check that looks for python3 and python in that order since we had agreed in the past to prefer python3 over python in all our code. The patch also adjusts invocations through the various Makefiles to use the set variable. * configure.ac: Check for python3 or python. * configure: Regenerated. * config.make.in (PYTHON): New variable. * benchtests/Makefile: Don't define PYTHON. (bench): Define target only if PYTHON was defined. * Rules: Don't define PYTHON. Define pretty printer targets only if PYTHON was defined. (tests-printers): Add to tests-unsupported if PYTHON is not found. (python-flags, python-invoke): Remove. (tests-printers-out): Use PYTHON instead of python-invoke.
2016-12-02Bug 20918 - Building with --enable-nss-crypt fails tst-linkall-staticCarlos O'Donell1-0/+1
Some configurations may use NSS cryptographic routines but have no static library for those routines. The following changes allow glibc to be built and tested with --enable-nss-crypt, but without having a static NSS library. At a high level the change does two things: (1) Detect at configure time if static NSS crypto libraries are available. Assumes libfreebl3.a (instead of the existing Fedora libfreebl.a which is incomplete) which matches libfreebl3.so. (2) If static NSS crypto libraries are _not_ available then adjust the way in which we build tst-linkall-static. This includes excluding a reference to crypt and not linking against libcrypt.a, all of which will fail otherwise. Testing assumptions: * Static library is named libfreebl3.a (not libfreebl.a as is currently provided in Fedora), matching libfreebl3.so shared link name. Tested on x86_64 on Fedora with: (a) --enable-nss-crypt, with no static NSS library support: PASS (previous FAIL) (b) --enable-nss-crypt, with faked static NSS library support: PASS (unsupported) * Requires changing elf/Makefile to include a stub /lib64/libfreebl3.a for testing purposes. (c) --disable-nss-crypt: PASS (default) No regressions on x86_64. For details see: https://www.sourceware.org/ml/libc-alpha/2016-11/msg00647.html
2016-09-21Avoid running $(CXX) during build to obtain header file pathsFlorian Weimer1-0/+2
This reduces the build time somewhat and is particularly noticeable during rebuilds with few code changes.
2016-02-24Enable --localedir to set message catalog directory (Bug 14259)Carlos O'Donell1-0/+1
In 1999 the project split "localedir" into "localedir" (path to compiled locale archives) and "msgcatdir" (path to message catalogs). This predates the 2002 change in the GNU Coding Standard to document the use of "localedir" for the path to the message catalogs. It appears that newlib, gcc, and several other projects also used "msgcatdir" at one point or another in the past, and so it is in line with historical precedent that glibc would also use "msgcatdir." However, given that the GNU Coding Standard uses "localedir", we will switch to that for consistency as a GNU project. Previous uses of --localdir didn't work anyway (see bug 14259). I am committing this patch in the understanding that nobody would object to fixing #14259 as part of aligning our variable usage to the GNU Coding Standard. Given that previous "localedir" uses were converted to "complocaledir" by [1], we can now convert "msgcatdir" to "localedir" and complete the transition. With an addition to config.make.in we also fix bug 14259 and allow users to specify the locale dependent data directory with "--localedir" at configure time. There is still no way to control at configure time the location of the *compiled* locale directory. Tested on x86_64 with no regressions. Tested using "--localedir" to specify alternate locale dependent data directory and verified with "make install DESTDIR=/tmp/glibc". [1] 90fe682d3067163aa773feecf497ef599429457a
2015-11-27Rename localedir to complocaledir (bug 14259).Carlos O'Donell1-1/+1
In preparation to fix the --localedir configure argument we must move the existing conflicting definition of localedir to a more appropriate name. Given that all current internal uses of localedir relate to the compiled locales we rename to complocaledir.
2015-11-14Run tst-prelink test for GLOB_DAT relocH.J. Lu1-0/+1
Run tst-prelink test on targets with GLOB_DAT relocaton. * config.make.in (have-glob-dat-reloc): New. * configure.ac (libc_cv_has_glob_dat): New. Set to yes if target supports GLOB_DAT relocaton. AC_SUBST. * configure: Regenerated. * elf/Makefile (tests): Add tst-prelink. (tests-special): Add $(objpfx)tst-prelink-cmp.out. (tst-prelink-ENV): New. ($(objpfx)tst-prelink-conflict.out): Likewise. ($(objpfx)tst-prelink-cmp.out): Likewise. * sysdeps/x86/tst-prelink.c: Moved to ... * elf/tst-prelink.c: Here. * sysdeps/x86/tst-prelink.exp: Moved to ... * elf/tst-prelink.exp: Here. * sysdeps/x86/Makefile (tests): Don't add tst-prelink. (tst-prelink-ENV): Removed. ($(objpfx)tst-prelink-conflict.out): Likewise. ($(objpfx)tst-prelink-cmp.out): Likewise. (tests-special): Don't add $(objpfx)tst-prelink-cmp.out.
2015-10-27Remove sysdeps/nptl/configure.ac.Joseph Myers1-1/+0
sysdeps/nptl/configure.ac tests for forced unwind support and the C cleanup attribute, giving errors if either is unsupported. It does nothing beyond running those two tests. Both the attribute, and _Unwind_GetCFA which is used in the forced unwind test, were added in GCC 3.3. Thus these tests are long obsolete, and this patch removes the configure fragment running them, along with associated conditionals. Tested for x86_64 and x86 (testsuite, and that installed stripped shared libraries are unchanged by the patch). * sysdeps/nptl/configure.ac: Remove file. * sysdeps/nptl/configure: Remove generated file. * configure.ac (libc_cv_forced_unwind): Do not substitute. * configure: Regenerated. * config.h.in (HAVE_FORCED_UNWIND): Remove #undef. * config.make.in (have-forced-unwind): Remove variable. * nptl/Makefile [$(have-forced-unwind) = yes]: Make code unconditional. * nptl/descr.h [HAVE_FORCED_UNWIND]: Likewise. * nptl/unwind.c [HAVE_FORCED_UNWIND]: Likewise. (__pthread_unwind) [!HAVE_FORCED_UNWIND]: Remove conditional code. * nptl/version.c [HAVE_FORCED_UNWIND]: Make code unconditional. * sysdeps/nptl/Makefile [$(have-forced-unwind) = yes]: Make code unconditional.
2015-10-26Remove support for removing glibc 2.0 headers.Joseph Myers1-1/+0
There is a configure test for the presence of glibc 2.0 headers (that were renamed / no longer installed in glibc 2.1) and associated support for removing them on "make install". Normal practice for subsequent removal / renaming of installed files has been not to do anything special about removing them; if you want installed files from an old installation removed reliably, you need to use a packaging system that tracks what files were installed by a previous glibc package (via installing in an intermediate directory with install_root). I think it's been long enough since 2.0 that it's not particularly useful to have that special logic for those old headers either; this patch removes it. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (old_glibc_headers): Remove configure test. * configure: Regenerated. * config.make.in (old-glibc-headers): Remove variable. * Makefile [!$(install_root) && $(old-glibc-headers) = yes] (install): Remove dependency on remove-old-headers. (headers2_0): Remove variable. (remove-old-headers): Remove rule.
2015-10-19use -fstack-protector-strong when availableMike Frysinger1-1/+1
With gcc-4.9, a new -fstack-protector-strong flag is available that is between -fstack-protector (pretty weak) and -fstack-protector-all (pretty strong) that provides good trade-offs between overhead but still providing good coverage. Update the places in glibc that use ssp to use this flag when it's available. This also kills off the indirection of hardcoding the flag name in the Makefiles and adding it based on a have-ssp boolean. Instead, the build always expands the $(stack-protector) variable to the best ssp setting. This makes the build logic a bit simpler and allows people to easily set to a diff flag like: make stack-protector=-fstack-protector-all
2015-10-19Remove -fgnu89-inline configure test.Joseph Myers1-1/+0
There is a configure test for -fgnu89-inline. This option was added in GCC 4.2, so the test is obsolete; this patch removes it. Tested for x86_64 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_gnu89_inline): Remove configure test. * configure: Regenerated. * config.make.in (gnu89-inline-CFLAGS): Remove variable. * Makeconfig (CFLAGS): Use -fgnu89-inline instead of $(gnu89-inline-CFLAGS).
2015-10-15Remove -Bgroup configure test.Joseph Myers1-1/+0
There is a configure test for the -Bgroup linker option whose results aren't used anywhere. This patch removes that test. Tested for x86_64 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_Bgroup): Remove configure test. * configure: Regenerated. * config.make.in (have-Bgroup): Remove variable.
2015-10-15Remove sizeof (long double) configure test.Joseph Myers1-2/+0
There is a configure test for sizeof (long double) whose results aren't used anywhere. This patch removes that test. Tested for x86_64 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (sizeof_long_double): Remove configure test. * configure: Regenerated. * config.make.in (sizeof-long-double): Remove variable.
2015-10-15Remove -fexceptions configure test.Joseph Myers1-1/+0
There is a configure test for -fexceptions. This option was added in GCC 2.8, so the test is obsolete - and indeed plenty of code is using -fexceptions directly. This patch removes the configure test and makes all uses of $(exceptions) use -fexceptions directly. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_gcc_exceptions): Remove configure test. * configure: Regenerated. * sysdeps/arm/configure.ac (libc_cv_gcc_exceptions): Do not set variable. (exceptions): Likewise. * sysdeps/arm/configure: Regenerated. * config.make.in (exceptions): Remove variable. * Makeconfig (uses-callbacks): Use -fexceptions instead of $(exceptions). * debug/Makefile (CFLAGS-dprintf_chk.c): Likewise. (CFLAGS-vdprintf_chk.c): Likewise. (CFLAGS-printf_chk.c): Likewise. (CFLAGS-fprintf_chk.c): Likewise. (CFLAGS-vprintf_chk.c): Likewise. (CFLAGS-vfprintf_chk.c): Likewise. (CFLAGS-gets_chk.c): Likewise. (CFLAGS-fgets_chk.c): Likewise. (CFLAGS-fgets_u_chk.c): Likewise. (CFLAGS-fread_chk.c): Likewise. (CFLAGS-fread_u_chk.c): Likewise. (CFLAGS-wprintf_chk.c): Likewise. (CFLAGS-fwprintf_chk.c): Likewise. (CFLAGS-vwprintf_chk.c): Likewise. (CFLAGS-vfwprintf_chk.c): Likewise. (CFLAGS-fgetws_chk.c): Likewise. (CFLAGS-fgetws_u_chk.c): Likewise. * libio/Makefile (CFLAGS-fileops.c): Likewise. (CFLAGS-fputc.c): Likewise. (CFLAGS-fputwc.c): Likewise. (CFLAGS-freopen64.c): Likewise. (CFLAGS-freopen.c): Likewise. (CFLAGS-fseek.c): Likewise. (CFLAGS-fseeko64.c): Likewise. (CFLAGS-fseeko.c): Likewise. (CFLAGS-ftello64.c): Likewise. (CFLAGS-ftello.c): Likewise. (CFLAGS-fwide.c): Likewise. (CFLAGS-genops.c): Likewise. (CFLAGS-getc.c): Likewise. (CFLAGS-getchar.c): Likewise. (CFLAGS-getwc.c): Likewise. (CFLAGS-getwchar.c): Likewise. (CFLAGS-iofclose.c): Likewise. (CFLAGS-iofflush.c): Likewise. (CFLAGS-iofgetpos64.c): Likewise. (CFLAGS-iofgetpos.c): Likewise. (CFLAGS-iofgets.c): Likewise. (CFLAGS-iofgetws.c): Likewise. (CFLAGS-iofputs.c): Likewise. (CFLAGS-iofputws.c): Likewise. (CFLAGS-iofread.c): Likewise. (CFLAGS-iofsetpos64.c): Likewise. (CFLAGS-iofsetpos.c): Likewise. (CFLAGS-ioftell.c): Likewise. (CFLAGS-iofwrite.c): Likewise. (CFLAGS-iogetdelim.c): Likewise. (CFLAGS-iogetline.c): Likewise. (CFLAGS-iogets.c): Likewise. (CFLAGS-iogetwline.c): Likewise. (CFLAGS-ioputs.c): Likewise. (CFLAGS-ioseekoff.c): Likewise. (CFLAGS-ioseekpos.c): Likewise. (CFLAGS-iosetbuffer.c): Likewise. (CFLAGS-iosetvbuf.c): Likewise. (CFLAGS-ioungetc.c): Likewise. (CFLAGS-ioungetwc.c): Likewise. (CFLAGS-oldfileops.c): Likewise. (CFLAGS-oldiofclose.c): Likewise. (CFLAGS-oldiofgetpos64.c): Likewise. (CFLAGS-oldiofgetpos.c): Likewise. (CFLAGS-oldiofsetpos64.c): Likewise. (CFLAGS-oldiofsetpos.c): Likewise. (CFLAGS-peekc.c): Likewise. (CFLAGS-putc.c): Likewise. (CFLAGS-putchar.c): Likewise. (CFLAGS-putwc.c): Likewise. (CFLAGS-putwchar.c): Likewise. (CFLAGS-rewind.c): Likewise. (CFLAGS-wfileops.c): Likewise. (CFLAGS-wgenops.c): Likewise. (CFLAGS-oldiofopen.c): Likewise. (CFLAGS-iofopen.c): Likewise. (CFLAGS-iofopen64.c): Likewise. (CFLAGS-oldtmpfile.c): Likewise. * stdio-common/Makefile (CFLAGS-vfprintf.c): Likewise. (CFLAGS-fprintf.c): Likewise. (CFLAGS-printf.c): Likewise. (CFLAGS-vfwprintf.c): Likewise. (CFLAGS-vfscanf.c): Likewise. (CFLAGS-vfwscanf.c): Likewise. (CFLAGS-fscanf.c): Likewise. (CFLAGS-scanf.c): Likewise. (CFLAGS-isoc99_vfscanf.c): Likewise. (CFLAGS-isoc99_vscanf.c): Likewise. (CFLAGS-isoc99_fscanf.c): Likewise. (CFLAGS-isoc99_scanf.c): Likewise. * wcsmbs/Makefile (CFLAGS-isoc99_wscanf.c): Likewise. (CFLAGS-isoc99_fwscanf.c): Likewise. (CFLAGS-isoc99_vwscanf.c): Likewise. (CFLAGS-isoc99_vfwscanf.c): Likewise.
2015-10-15Remove -static-libgcc configure test.Joseph Myers1-2/+0
There is a configure test for -static-libgcc. GCC added this option in version 3.0, so this test is obsolete; this patch removes it. Tested for x86_64 and x86 (testsuite, and that installed shared libraries are unchanged by the patch). * configure.ac (libc_cv_gcc_static_libgcc): Remove configure test. * configure: Regenerated. * config.make.in (static-libgcc): Remove variable. * Makerules (build-shlib-helper): Use -static-libgcc instead of $(static-libgcc). (build-module-helper): Likewise.
2015-10-06Add a test case for C++11 thread_local supportFlorian Weimer1-0/+1
This requires a C++ compiler with thread_local support, and a new configure check is needed.
2015-09-18timezone: add a configure flag to disable program installMike Frysinger1-0/+1
Some distros build+install the timezone tools (zic/zdump/tzselect) outside of glibc and use the upstream package directly. Add a configure flag to glibc so they can disable install of those tools. This allows tests to run & pass regardless of the configure flag. Only the install of them is impacted.
2015-06-25Support compilers defaulting to PIEH.J. Lu1-0/+1
To support building glibc with GCC 6 configured with --enable-default-pie, which generates PIE by default, we need to build programs as PIE. But elf/tst-dlopen-aout must not be built as PIE since it tests dlopen on ET_EXEC file and PIE is ET_DYN. [BZ #17841] * Makeconfig (no-pie-ldflag): New. (+link): Set to $(+link-pie) if default to PIE. (+link-tests): Set to $(+link-pie-tests) if default to PIE. * config.make.in (build-pie-default): New. * configure.ac (libc_cv_pie_default): New. Set to yes if -fPIE is default. AC_SUBST. * configure: Regenerated. * elf/Makefile (LDFLAGS-tst-dlopen-aout): New.
2015-03-31Add a testcase for copy reloc against protected dataH.J. Lu1-0/+1
Linkers in some versions of binutils 2.25 and 2.26 don't support protected data symbol with error messsage like: /usr/bin/ld: copy reloc against protected `bar' is invalid /usr/bin/ld: failed to set dynamic section sizes: Bad value We check if linker supports copy reloc against protected data symbol to avoid running the test if linker is broken. [BZ #17711] * config.make.in (have-protected-data): New. * configure.ac: Check linker support for protected data symbol. * configure: Regenerated. * elf/Makefile (modules-names): Add tst-protected1moda and tst-protected1modb if $(have-protected-data) is yes. (tests): Add tst-protected1a and tst-protected1b if $(have-protected-data) is yes. ($(objpfx)tst-protected1a): New. ($(objpfx)tst-protected1b): Likewise. (tst-protected1modb.so-no-z-defs): Likewise. * elf/tst-protected1a.c: New file. * elf/tst-protected1b.c: Likewise. * elf/tst-protected1mod.h: Likewise. * elf/tst-protected1moda.c: Likewise. * elf/tst-protected1modb.c: Likewise.
2014-12-10Use -Werror by default, add --disable-werror.Joseph Myers1-0/+1
As discussed starting at <https://sourceware.org/ml/libc-alpha/2014-11/msg00323.html>, this patch makes the glibc build use -Werror by default to avoid accidentally adding new warnings to the build. The configure option --disable-werror can be used to disable this. -Wno-error=undef is temporarily used because the build isn't clean regarding -Wundef warnings. The idea is that once the remaining -Wundef warnings have been cleaned up (in at least one configuration), -Wno-error=undef will be removed. I get a clean build and test on x86_64 (GCC 4.9 branch) with this patch. The expectation is that this may well break the build for some other configurations, and people seeing such breakage should make appropriate fixes to fix or suppress the warnings for their configurations. In some cases that may involve using pragmas as the right fix (I think that will be right for the -Wno-inline issue for MIPS I referred to in <https://sourceware.org/ml/libc-alpha/2012-11/msg00798.html>, for example), in some cases -Wno-error in sysdeps makefiles (__restore_rt in MIPS sigaction, for example), in some cases substantive fixes for the warnings. Note that if, with a view to listing all the warnings then fixing them all, you just look for "warning:" in output from building and testing with --disable-werror, you'll see lots of warnings from the linker about functions such as tmpnam. Those warnings can be ignored - only compiler warnings are relevant to -Werror, not linker warnings. * configure.ac (--disable-werror): New configure option. (enable_werror): New AC_SUBST. * configure: Regenerated. * config.make.in (enable-werror): New variable. * Makeconfig [$(enable-werror) = yes] (+gccwarn): Add -Werror -Wno-error=undef. (+gccwarn-c): Do not use -Werror=implicit-function-declaration. * manual/install.texi (Configuring and compiling): Document --disable-werror. * INSTALL: Regenerated. * debug/Makefile (CFLAGS-tst-chk1.c): Add -Wno-error. (CFLAGS-tst-chk2.c): Likewise. (CFLAGS-tst-chk3.c): Likewise. (CFLAGS-tst-chk4.cc): Likewise. (CFLAGS-tst-chk5.cc): Likewise. (CFLAGS-tst-chk6.cc): Likewise. (CFLAGS-tst-lfschk1.c): Likewise. (CFLAGS-tst-lfschk2.c): Likewise. (CFLAGS-tst-lfschk3.c): Likewise. (CFLAGS-tst-lfschk4.cc): Likewise. (CFLAGS-tst-lfschk5.cc): Likewise. (CFLAGS-tst-lfschk6.cc): Likewise.
2014-09-16Remove bitrotten --enable-oldest-abi (bug 6652).Joseph Myers1-1/+0
This patch removes the --enable-oldest-abi configure option, which has long been bitrotten (as reported in bug 6652). The principle of removing this option was agreed in the thread starting at <https://sourceware.org/ml/libc-alpha/2013-07/msg00174.html>. Tested for x86_64 and x86 that the installed shared libraries other than libc.so are unchanged by this patch and that libc.so disassembly and symbol versions are unchanged (debug info changes because of changed line numbers in csu/version.c). [BZ #6652] * Makeconfig (soversions-default-setname): Remove variable. ($(common-objpfx)soversions.i): Don't pass default_setname to soversions.awk. * Makerules ($(common-objpfx)abi-versions.h): Don't pass oldest_abi to abi-versions.awk. * config.h.in (GLIBC_OLDEST_ABI): Remove macro undefine. * config.make.in (oldest-abi): Remove variable. * configure.ac (--enable-oldest-abi): Remove configure option. * configure: Regenerated. * csu/version.c (banner) [GLIBC_OLDEST_ABI]: Remove conditional text. * scripts/abi-versions.awk: Do not handle oldest_abi variable. * scripts/soversions.awk: Do not handle default_setname variable. * sysdeps/mach/hurd/configure.ac: Do not handle oldest_abi variable. * sysdeps/mach/hurd/configure: Regenerated. * sysdeps/unix/sysv/linux/configure.ac: Do not handle oldest_abi variable. * sysdeps/unix/sysv/linux/configure: Regenerated.
2014-05-09S/390: Port of lock elision to System/zDominik Vogt1-0/+1
Added support for TX lock elision of pthread mutexes on s390 and s390x. This may improve lock scaling of existing programs on TX capable systems. The lock elision code is only built with --enable-lock-elision=yes and then requires a GCC version supporting the TX builtins. With lock elision default mutexes are elided via __builtin_tbegin, if the cpu supports transactions. By default lock elision is not enabled and the elision code is not built.
2014-04-06PowerPC: define _CALL_ELF if compiler does notAdhemerval Zanella1-0/+1
This patch makes the configure adds -D_CALL_ELF=1 when compiler does not define _CALL_ELF (versions before powerpc64le support). It cleans up compiler warnings on old compiler where _CALL_ELF is not defined on powerpc64(be) builds. It does by add a new config.make variable for configure-deduced CPPFLAGS and accumulate into that (confix-extra-cppflags). It also generalizes libc_extra_cflags so it accumulates in sysdeps configure fragmenets.
2014-03-13stop supporting bash-1.xMike Frysinger1-2/+0
We've stopped supporting toolchain packages older than 2009, so punting bash-1.x is reasonable when bash-2 was released almost 20 years ago.
2014-03-13delete ksh checksMike Frysinger1-2/+0
Nothing in the tree uses ksh anymore, so punt these checks.
2013-09-04Remove --disable-versioning.Joseph Myers1-1/+0
2013-07-21CVE-2013-2207, BZ #15755: Disable pt_chown.Carlos O'Donell1-0/+1
The helper binary pt_chown tricked into granting access to another user's pseudo-terminal. Pre-conditions for the attack: * Attacker with local user account * Kernel with FUSE support * "user_allow_other" in /etc/fuse.conf * Victim with allocated slave in /dev/pts Using the setuid installed pt_chown and a weak check on whether a file descriptor is a tty, an attacker could fake a pty check using FUSE and trick pt_chown to grant ownership of a pty descriptor that the current user does not own. It cannot access /dev/pts/ptmx however. In most modern distributions pt_chown is not needed because devpts is enabled by default. The fix for this CVE is to disable building and using pt_chown by default. We still provide a configure option to enable hte use of pt_chown but distributions do so at their own risk.
2013-03-20Move system-specific settings out of toplevel configure.in and config.make.in.Joseph Myers1-8/+0
2013-03-19Add support for rtld directory different from slib directoryAndreas Schwab1-0/+1
generated by cgit v1.1 at 2024-11-23 05:11:39 +0000