aboutsummaryrefslogtreecommitdiff
path: root/INSTALL
AgeCommit message (Collapse)AuthorFilesLines
2014-06-07Remove redundant C locale settings.Joseph Myers1-6/+6
Various glibc build / install / test code has C locale settings that are redundant with LC_ALL=C. LC_ALL takes precedence over LANG, so anywhere that sets LC_ALL=C (explicitly, or through it being in the default environment for running tests) does not need to set LANG=C. LC_ALL=C also takes precedence over LANGUAGE, since 2001-01-02 Ulrich Drepper <drepper@redhat.com> * intl/dcigettext.c (guess_category_value): Rewrite so that LANGUAGE value is ignored if the selected locale is the C locale. * intl/tst-gettext.c: Set locale for above change. * intl/tst-translit.c: Likewise. and so settings of LANGUAGE=C are also redundant when LC_ALL=C is set. One test also had LC_ALL=C in its -ENV setting, although it's part of the default environment used for tests. This patch removes the redundant settings. It removes a suggestion in install.texi of setting LANGUAGE=C LC_ALL=C for "make install"; the Makefile.in target "install" already sets LC_ALL_C so there's no need for the user to set it (and nor should there be any need for the user to set it). If some build machine tool used by "make install" uses a version of libintl predating that 2001 change, and the user has LANGUAGE set, the removal of LANGUAGE=C from the Makefile.in "install" rule could in principle affect the user's installation. However, I don't think we need to be concerned about pre-2001 build tools. Tested x86_64. * Makefile (install): Don't set LANGUAGE. * Makefile.in (install): Likewise. * assert/Makefile (test-assert-ENV): Remove variable. (test-assert-perr-ENV): Likewise. * elf/Makefile (neededtest4-ENV): Likewise. * iconvdata/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * io/ftwtest-sh (LANG): Remove variable. * libio/Makefile (tst-widetext-ENV): Likewise. * manual/install.texi (Running make install): Don't refer to environment settings for make install. * INSTALL: Regenerated. * nptl/tst-tls6.sh: Don't set LANG. * posix/globtest.sh (LANG): Remove variable. * string/Makefile (tester-ENV): Likewise. (inl-tester-ENV): Likewise. (noinl-tester-ENV): Likewise. * sysdeps/s390/s390-64/Makefile ($(inst_gconvdir)/gconv-modules) [$(cross-compiling) = no]: Don't set LANGUAGE. * timezone/Makefile (build-testdata): Use $(built-program-cmd) without explicit environment settings. localedata/ChangeLog: * tst-fmon.sh: Don't set LANGUAGE. * tst-locale.sh: Likewise.
2014-06-06Don't require test wrappers to preserve environment variables, use more ↵Joseph Myers1-7/+8
consistent environment. One wart in the original support for test wrappers for cross testing, as noted in <https://sourceware.org/ml/libc-alpha/2012-10/msg00722.html>, is the requirement for test wrappers to pass a poorly-defined set of environment variables from the build system to the system running the glibc under test. Although some variables are passed explicitly via $(test-wrapper-env), including LD_* variables that simply can't be passed implicitly because of the side effects they'd have on the build system's dynamic linker, others are passed implicitly, including variables such as GCONV_PATH and LOCPATH that could potentially affect the build system's libc (so effectively relying on any such effects not breaking the wrappers). In addition, the code in cross-test-ssh.sh for preserving environment variables is fragile (it depends on how bash formats a list of exported variables, and could well break for multi-line variable definitions where the contents contain things looking like other variable definitions). This patch moves to explicitly passing environment variables via $(test-wrapper-env). Makefile variables that previously used $(test-wrapper) are split up into -before-env and -after-env parts that can be passed separately to the various .sh files used in testing, so those files can then insert environment settings between the two parts. The common default environment settings in make-test-out are made into a separate makefile variable that can also be passed to scripts, rather than many scripts duplicating those settings (for testing an installed glibc, it is desirable to have the GCONV_PATH setting on just one place, so just that one place needs to support it pointing to an installed sysroot instead of the build tree). The default settings are included in the variables such as $(test-program-prefix), so that if tests do not need any non-default settings they can continue to use single variables rather than the split-up variables. Although this patch cleans up LC_ALL=C settings (that being part of the common defaults), various LANG=C and LANGUAGE=C settings remain. Those are generally unnecessary and I propose a subsequent cleanup to remove them. LC_ALL takes precedence over LANG, and while LANGUAGE takes precedence over LC_ALL, it only does so for settings other than LC_ALL=C. So LC_ALL=C on its own is sufficient to ensure the C locale, and anything that gets LC_ALL=C does not need the other settings. While preparing this patch I noticed some tests with .sh files that appeared to do nothing beyond what the generic makefile support for tests can do (localedata/tst-wctype.sh - the makefiles support -ENV variables and .input files - and localedata/tst-mbswcs.sh - just runs five tests that could be run individually from the makefile). So I propose another subsequent cleanup to move those to using the generic support instead of special .sh files. Tested x86_64 (native) and powerpc32 (cross). * Makeconfig (run-program-env): New variable. (run-program-prefix-before-env): Likewise. (run-program-prefix-after-env): Likewise. (run-program-prefix): Define in terms of new variables. (built-program-cmd-before-env): New variable. (built-program-cmd-after-env): Likewise. (built-program-cmd): Define in terms of new variables. (test-program-prefix-before-env): New variable. (test-program-prefix-after-env): Likewise. (test-program-prefix): Define in terms of new variables. (test-program-cmd-before-env): New variable. (test-program-cmd-after-env): Likewise. (test-program-cmd): Define in terms of new variables. * Rules (make-test-out): Use $(run-program-env). * scripts/cross-test-ssh.sh (env_blacklist): Remove variable. (help): Do not mention environment variables. Mention --timeoutfactor option. (timeoutfactor): New variable. (blacklist_exports): Remove function. (exports): Remove variable. (command): Do not include ${exports}. * manual/install.texi (Configuring and compiling): Do not mention test wrappers preserving environment variables. Mention that last assignment to a variable must take precedence. * INSTALL: Regenerated. * benchtests/Makefile (run-bench): Use $(run-program-env). * catgets/Makefile ($(objpfx)test1.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test2.cat): Do not specify environment variables explicitly. ($(objpfx)de/libc.cat): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)test-gencat.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)sample.SJIS.cat): Do not specify environment variables explicitly. * catgets/test-gencat.sh: Use test_program_cmd_before_env, run_program_env and test_program_cmd_after_env arguments. * elf/Makefile ($(objpfx)tst-pathopt.out): Use $(run-program-env). * elf/tst-pathopt.sh: Use run_program_env argument. * iconvdata/Makefile ($(objpfx)iconv-test.out): Use $(test-wrapper-env) and $(run-program-env). * iconvdata/run-iconv-test.sh: Use test_wrapper_env and run_program_env arguments. * iconvdata/tst-table.sh: Do not set GCONV_PATH explicitly. * intl/Makefile ($(objpfx)tst-gettext.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-gettext2.out): Likewise. * intl/tst-gettext.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * intl/tst-gettext2.sh: Likewise. * intl/tst-gettext4.sh: Do not set environment variables explicitly. * intl/tst-gettext6.sh: Likewise. * intl/tst-translit.sh: Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * malloc/tst-mtrace.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * math/Makefile (run-regen-ulps): Use $(run-program-env). * nptl/Makefile ($(objpfx)tst-tls6.out): Use $(run-program-env). * nptl/tst-tls6.sh: Use run_program_env argument. Set LANG=C explicitly with each use of ${test_wrapper_env}. * posix/Makefile ($(objpfx)wordexp-tst.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * posix/tst-getconf.sh: Do not set environment variables explicitly. * posix/wordexp-tst.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * stdio-common/tst-printf.sh: Do not set environment variables explicitly. * stdlib/Makefile ($(objpfx)tst-fmtmsg.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). * stdlib/tst-fmtmsg.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. Split $test calls into $test_pre and $test. * timezone/Makefile (build-testdata): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). localedata/ChangeLog: * Makefile ($(addprefix $(objpfx),$(CTYPE_FILES))): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)sort-test.out): Use $(test-program-prefix-before-env), $(run-program-env) and $(test-program-prefix-after-env). ($(objpfx)tst-fmon.out): Use $(run-program-prefix-before-env), $(run-program-env) and $(run-program-prefix-after-env). ($(objpfx)tst-locale.out): Use $(built-program-cmd-before-env), $(run-program-env) and $(built-program-cmd-after-env). ($(objpfx)tst-trans.out): Use $(run-program-prefix-before-env), $(run-program-env), $(run-program-prefix-after-env), $(test-program-prefix-before-env) and $(test-program-prefix-after-env). ($(objpfx)tst-ctype.out): Use $(test-program-cmd-before-env), $(run-program-env) and $(test-program-cmd-after-env). ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)tst-langinfo-static.out): Likewise. * gen-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * sort-test.sh: Use test_program_prefix_before_env, run_program_env and test_program_prefix_after_env arguments. * tst-ctype.sh: Use tst_ctype_before_env, run_program_env and tst_ctype_after_env arguments. * tst-fmon.sh: Use run_program_prefix_before_env, run_program_env and run_program_prefix_after_env arguments. * tst-langinfo.sh: Use tst_langinfo_before_env, run_program_env and tst_langinfo_after_env arguments. * tst-locale.sh: Use localedef_before_env, run_program_env and localedef_after_env arguments. * tst-mbswcs.sh: Do not set environment variables explicitly. * tst-numeric.sh: Likewise. * tst-rpmatch.sh: Likewise. * tst-trans.sh: Use run_program_prefix_before_env, run_program_env, run_program_prefix_after_env, test_program_prefix_before_env and test_program_prefix_after_env arguments. * tst-wctype.sh: Use tst_wctype_before_env, run_program_env and tst_wctype_after_env arguments.
2014-04-30Increase minimum Linux kernel version to 2.6.32.Joseph Myers1-1/+1
This patch increases the minimum Linux kernel version for glibc to 2.6.32, as discussed in the thread starting at <https://sourceware.org/ml/libc-alpha/2014-01/msg00511.html>. This patch just does the minimal change to arch_minimum_kernel settings (and LIBC_LINUX_VERSION, which determines the minimum kernel headers version, as it doesn't make sense for that to be older than the minimum kernel that can be used at runtime). Followups would be expected to do, roughly and not necessarily precisely in this order: * Remove __LINUX_KERNEL_VERSION checks in kernel-features.h files where those checks are always true / always false for kernels 2.6.32 and above. * Otherwise simplify/improve conditionals in those files (for example, where defining once in the main file then undefining in architecture-specific files makes things clearer than having lots of separate definitions of the same macro), possibly fixing in the process cases where a macro should optimally have been defined for a given architecture but wasn't. (In the review in preparation for this version increase I checked what the right conditions should be for all macros in the main kernel-features.h whose definitions there would have been affected by the increase - but I only fixed that subset of the issues found where --enable-kernel=2.6.32 would have caused a kernel feature to be wrongly assumed to be present, not any cases where a feature is not assumed but could be assumed.) * Remove conditionals on __ASSUME_* where they can now be taken to be always-true, and the definitions when the macros are only used in Linux-specific files. * Split more architectures out of the main kernel-features.h (like ex-ports architectures), once various of the architecture conditionals there have been eliminated so the new architecture-specific files are no larger than actually necessary. Tested x86_64. 2014-03-27 Joseph Myers <joseph@codesourcery.com> [BZ #9894] * sysdeps/unix/sysv/linux/configure.ac (LIBC_LINUX_VERSION): Change to 2.6.32. (arch_minimum_kernel): Change all 2.6.16 settings to 2.6.32. * sysdeps/unix/sysv/linux/configure: Regenerated. * sysdeps/unix/sysv/linux/microblaze/configure.ac: Remove file. * sysdeps/unix/sysv/linux/microblaze/configure: Likewise. * sysdeps/unix/sysv/linux/tile/configure.ac: Likewise. * sysdeps/unix/sysv/linux/tile/configure: Likewise. * README: Update reference to required Linux kernel version. * manual/install.texi (Linux): Update reference to required Linux kernel headers version. * INSTALL: Regenerated.
2014-03-14Do not terminate default test runs on test failure.Joseph Myers1-0/+6
This patch is an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00198.html> and <https://sourceware.org/ml/libc-alpha/2014-03/msg00180.html>. Normal practice for software testsuites is that rather than terminating immediately when a test fails, they continue running and report at the end on how many tests passed or failed. The principle behind the glibc testsuite stopping on failure was probably that the expected state is no failures and so any failure indicates a problem such as miscompilation. In practice, while this is fairly close to true for native testing on x86_64 and x86 (kernel bugs and race conditions can still cause intermittent failures), it's less likely to be the case on other platforms, and so people testing glibc run the testsuite with "make -k" and then examine the logs to determine whether the failures are what they expect to fail on that platform, possibly with some automation for the comparison. This patch switches the glibc testsuite to the normal convention of not stopping on failure - unless you use stop-on-test-failure=y, in which case it behaves essentially as it did before (and does not generate overall test summaries on failure). Instead, the summary tests.sum may contain tests that FAILed. At the end of the test run, any FAIL or ERROR lines from tests.sum are printed, and then it exits with error status if there were any such lines. In addition, build failures will also cause the test run to stop - this has the justification that those *do* indicate serious problems that should be promptly fixed and aren't generally hard to fix (but apart from that, avoiding the build stopping on those failures seems harder). Note that unlike the previous patches in this series, this *does* require people with automation around testing glibc to change their processes - either to start using tests.sum / xtests.sum to track failures and compare them with expectations (with or without also using "make -k" and examining "make" logs to identify build failures), or else to use stop-on-test-failure=y and ignore the new tests.sum / xtests.sum mechanism. (If all you check is the exit status from "make check", no changes are needed unless you want to avoid test runs continuing after the first failure.) Tested x86_64. * scripts/evaluate-test.sh: Handle fourth argument to determine whether test run should stop on failure. * Makeconfig (stop-on-test-failure): New variable. (evaluate-test): Pass fourth argument to evaluate-test.sh based on $(stop-on-test-failure). * Makefile (tests): Give a summary of results from testing and exit with failure status if they include an ERROR or FAIL. (xtests): Likewise. * manual/install.texi (Configuring and compiling): Mention stop-on-test-failure=y. * INSTALL: Regenerated.
2014-03-13Regenerate INSTALL.Joseph Myers1-1/+1
2013-12-19Stop partial menu generation in INSTALL fileAllan McRae1-4/+4
The commit d136c6dc resulted in menu text for the "Top" node being added to the INSTALL file on regeneration. As the full menu is not displayed in the plain text file anyway, suppress the menu section completely to avoid the additional text. Also regenerate the INSTALL file to commit a small formatting change introduced in the same commit.
2013-10-30rename configure.in to configure.acMike Frysinger1-1/+1
Autoconf has been deprecating configure.in for quite a long time. Rename all our configure.in and preconfigure.in files to .ac. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-09-10Update pt_chown sections of the manualAllan McRae1-8/+5
The pt-chown binary is discussed in the "Running make install" section without clarification of the needed configure option. Clarify this and simplfy the discription which is already covered in the "Configuring and compiling" section.
2013-09-04Remove --disable-versioning.Joseph Myers1-5/+0
2013-07-21CVE-2013-2207, BZ #15755: Disable pt_chown.Carlos O'Donell1-0/+12
The helper binary pt_chown tricked into granting access to another user's pseudo-terminal. Pre-conditions for the attack: * Attacker with local user account * Kernel with FUSE support * "user_allow_other" in /etc/fuse.conf * Victim with allocated slave in /dev/pts Using the setuid installed pt_chown and a weak check on whether a file descriptor is a tty, an attacker could fake a pty check using FUSE and trick pt_chown to grant ownership of a pty descriptor that the current user does not own. It cannot access /dev/pts/ptmx however. In most modern distributions pt_chown is not needed because devpts is enabled by default. The fix for this CVE is to disable building and using pt_chown by default. We still provide a configure option to enable hte use of pt_chown but distributions do so at their own risk.
2013-07-04Fix lock elision help text in INSTALL and configureSiddhesh Poyarekar1-1/+1
2013-07-02Add a configure option to enable lock elision and disable by defaultAndi Kleen1-0/+3
Can be enabled with --enable-lock-elision=yes at configure time.
2013-06-26Require GCC 4.4 or later to build glibc.Joseph Myers1-2/+2
2013-06-24Regenerate INSTALL fileSiddhesh Poyarekar1-3/+4
2013-03-12Remove mention of i386-pc-linux-gnu.Carlos O'Donell1-3/+8
The GNU C Library does not support building for i386 therefore we remove mention of this configuration from the INSTALL file.
2012-11-09Support --with-pkgversion and --with-bugurl.Joseph Myers1-5/+18
2012-10-31Document general use of test-wrapper and test-wrapper-env.Joseph Myers1-0/+11
2012-10-25Add cross-test-ssh.sh.Joseph Myers1-1/+7
2012-05-23Do not mention old Linux kernel versions in installation documentation.Joseph Myers1-8/+3
2012-05-18Fix INSTALL description for modified files in source dirAndreas Jaeger1-2/+2
2012-05-16Update Texinfo version requirement.Joseph Myers1-8/+8
2012-03-08Clean up glibc manual references to "GNU system" (bug 6911).Joseph Myers1-6/+7
2012-03-01Require binutils 2.20 or later.Joseph Myers1-1/+1
2012-02-28Use Texinfo macros to refer to the GNU C Library within the manual.Joseph Myers1-95/+97
2012-02-27Require GCC 4.3 or later.Joseph Myers1-14/+5
2012-02-27Require Linux kernel headers from "make headers_install", >= 2.6.19.1.Joseph Myers1-32/+30
2012-02-21Fix stray word in line-wrapped comment in install.texi.Joseph Myers1-2/+0
2012-02-21Update or avoid glibc version numbers in manual.Joseph Myers1-15/+14
2012-02-18Remove documentation of upgrading from libc5.Joseph Myers1-29/+13
2012-01-07Fix WSUlrich Drepper1-1/+0
2012-01-07Remove --enable-omitfp supportUlrich Drepper1-14/+6
2010-10-03Remove specific binutils version recommendation in INSTALL file.Ulrich Drepper1-3/+3
2010-05-05Regenerate INSTALLAndreas Schwab1-10/+10
2006-03-06* version.h (VERSION): 2.4glibc-2.4cvs/glibc-2_4cvs/fedora-glibc-20060306T1239Roland McGrath1-95/+26
* README.template: Update for 2.4. * README: Regenerated. * manual/install.texi (Configuring and compiling): Separate build directory is mandatory. Use glibc-2.4 in example. Update --enable-add-ons description. (Supported Configurations): Remove section. * INSTALL: Regenerated.
2006-03-01* Makefile (format-me): Use --plaintext --no-number-sections.Roland McGrath1-14/+14
* NOTES, INSTALL: Regenerated.
2006-02-02* manual/install.texi (Tools for Compilation): Require gcc 3.4,Roland McGrath1-19/+16
recommend 4.1, advise 4.0 for powerpc64, and note 4.1 required for powerpc, s390{x,} with new long double. * INSTALL: Regenerated.
2004-12-22(CFLAGS-tst-align.c): Add -mpreferred-stack-boundary=4.Ulrich Drepper1-53/+125
2007-07-122.5-18.1Jakub Jelinek1-125/+53
2004-08-102004-08-09 Roland McGrath <roland@frob.com>Roland McGrath1-58/+52
* manual/install.texi (Supported Configurations): Replace bug-glibc mention with web URL. * INSTALL: Regenerated. * locale/iso-3166.def: Likewise, in comment. * locale/iso-4217.def: Likewise. * locale/iso-639.def: Likewise. * posix/cpio.h: Remove bug reporting comment.
2004-02-29Update.Andreas Jaeger1-8/+20
2004-02-29 Andreas Jaeger <aj@suse.de> * manual/install.texi (Tools for Compilation): Autoconf 2.53 is required. (Supported Configurations): Add x86_64-*-linux. * INSTALL: Regenerated.
2002-12-10Update.Ulrich Drepper1-13/+4
2002-12-09 Ulrich Drepper <drepper@redhat.com> * sysdeps/unix/sysv/linux/syscalls.list: Add __libc_creat and __libc_select aliases. * sysdeps/unix/sysv/linux/sigwaitinfo.c: Define __libc_sigwaitinfo alias. * sysdeps/unix/sysv/linux/sigwait.c: Define __libc_sigwait alias. * sysdeps/unix/sysv/linux/sigsuspend.c: Define __libc_sigsuspend alias. * sysdeps/unix/sysv/linux/poll.c: Define __libc_poll alias. * sysdeps/unix/syscalls.list: Define __libc_select alias. * sysdeps/posix/waitid.c: Define __libc_waitid alias. * sysdeps/posix/sigpause.c: Define __libc_sigpause and __libc___xpg_sigpause aliases. * sysdeps/generic/pselect.c: Define __libc_pselect alias. * misc/error.c: Remove use of USE_IN_LIBIO.
2002-08-22* configure.in: Make GCC version check require 3.[2-9]* and no others.Roland McGrath1-28/+27
* configure: Regenerated. * manual/install.texi (Tools for Compilation): Say 3.2 is required. (Configuring and compiling): Don't mention older GCC versions any more. * INSTALL: Regenerated. * manual/install.texi (Configuring and compiling, Installation, Running make install, Linux): Linux -> GNU/Linux where appropriate. * elf/rtld.c (_dl_start_final): Move defn before _dl_start so it can be inlined. Declare it with always_inline if [DONT_USE_BOOTSTRAP_MAP] and with noinline otherwise. Remove hack alloca use to prevent inlining, we can ask for it explicitly nowadays.
2002-04-06Update.Ulrich Drepper1-60/+64
2002-03-23 Jakub Jelinek <jakub@redhat.com> * sysdeps/generic/brk.c (__curbrk): Declare. * sysdeps/generic/dl-brk.c: Add attribute_hidden to __curbrk. * sysdeps/generic/dl-sbrk.c: Likewise. * sysdeps/unix/arm/dl-brk.S: New file. * sysdeps/unix/bsd/hp/m68k/dl-brk.S: New file. * sysdeps/unix/bsd/osf/alpha/dl-brk.S: New file. * sysdeps/unix/bsd/sun/m68k/dl-brk.S: New file. * sysdeps/unix/bsd/vax/dl-brk.S: New file. * sysdeps/unix/i386/dl-brk.S: New file. * sysdeps/unix/mips/dl-brk.S: New file. * sysdeps/unix/sparc/dl-brk.S: New file. * sysdeps/unix/sysv/linux/alpha/dl-brk.S: New file. * sysdeps/unix/sysv/linux/ia64/dl-brk.S: New file. * sysdeps/unix/sysv/linux/powerpc/dl-brk.S: New file. * sysdeps/unix/sysv/linux/sparc/sparc64/dl-brk.S: New file. * sysdeps/unix/sysv/linux/i386/dl-brk.c: Remove. * sysdeps/unix/sysv/linux/i386/dl-sbrk.c: Remove. 2002-04-03 Andreas Schwab <schwab@suse.de> * Makefile (headers): Add gnu/lib-names.h here instead of install-others. ($(inst_includedir)/gnu/lib-names.h): Remove explicit installation rule. (install-headers): Add dependency on install-headers-nosubdir. * stdio-common/Makefile (headers): Add bits/stdio_lim.h here instead of install-others. ($(inst_includedir)/bits/stdio_lim.h): Remove explicit installation rule. 2002-04-05 Ulrich Drepper <drepper@redhat.com> * manual/users.tex (Enable/Disable Setuid): Fix typo in example. Reported by Sam Roberts <sroberts@uniserve.com>. 2002-04-03 Jakub Jelinek <jakub@redhat.com> * elf/do-rel.h (elf_dynamic_do_rel): Skip relative relocs if l_addr == 0 and ELF_MACHINE_REL_RELATIVE. * sysdeps/alpha/dl-machine.h (ELF_MACHINE_REL_RELATIVE): Define. * sysdeps/ia64/dl-machine.h (ELF_MACHINE_REL_RELATIVE): Define. 2002-04-03 David Mosberger <davidm@hpl.hp.com> * sysdeps/ia64/dl-machine.h (TRAMPOLINE_TEMPLATE): Add unwind info. (RTLD_START): Ditto. (__ia64_init_bootstrap_fdesc_table): Insert stop bit to avoid RAW dependency violation.
2002-02-07Update.Ulrich Drepper1-25/+28
2002-02-06 Ulrich Drepper <drepper@redhat.com> * configure.in: Add --without-tls option. * sysdeps/i386/elf/configure.in: Don't check for TLS support if --without-tls is given. * sysdeps/generic/dl-tls.c: Include <tls.h>. * sysdeps/i386/dl-tls.h: Don't define anything if !USE_TLS.
2001-04-19Update.Andreas Jaeger1-2/+2
* configure.in: Require gettext 0.10.36 or newer. * manual/install.texi (Tools for Compilation): Mention gettext 0.10.36.
2001-03-27Mention s390x.Andreas Jaeger1-1/+2
2001-02-09Regenerate.Andreas Jaeger1-25/+23
2000-11-04Update.Ulrich Drepper1-0/+7
2000-11-03 Ulrich Drepper <drepper@redhat.com> * posix/Versions: Export __sysconf.
2000-09-20Update.Andreas Jaeger1-0/+1
2000-09-20 Andreas Jaeger <aj@suse.de> * iconvdata/Makefile (generated): Add tst-tables.out. * intl/Makefile (generated): Add test output. 2000-09-19 Andreas Jaeger <aj@suse.de> * sunrpc/clnt_simp.c (callrpc): Fix write beyond end of buffer. Reported by Jens-Uwe Mager <jum@helios.de>.
2000-08-09Update.Andreas Jaeger1-17/+14
2000-08-09 Andreas Jaeger <aj@suse.de> * configure.in: Change required make versions. * manual/install.texi (Tools for Compilation): Document required make version. (Supported Configurations): Update list of supported configurations.
generated by cgit v1.1 at 2024-11-19 23:13:46 +0000