aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-02-26Fix two spaces after sentence.Ondřej Bílka19-55/+74
Minor formatting fix that was carried by issuing sed -e"s/\. \([A-Z]\)/. \1/" followed by editing result.
2014-02-26Add macros and inline functions to mips math_private.h file.Steve Ellcey2-8/+169
This is a patch to the MIPS math_private.h file to define HAVE_RM_CTX and implement the ctx macros. I also defined a few other macros and inline functions that I skipped the first time.
2014-02-26Use @Theglibc{} in manual/ipc.texi.Carlos O'Donell2-1/+3
2014-02-26Add a new "Inter-Process Communication" chapter.Carlos O'Donell5-4/+127
This patch adds a new "Inter-Process Communication" chapter to cover the sem*, msg*, and shm* functions. Initially we document only the sem* function signatures and their safety notes.
2014-02-26PowerPC: Update powerpc-fpu ULPs.Adhemerval Zanella2-2/+3499
2014-02-26Simplify calloc implementation.Ondřej Bílka2-109/+10
To make future improvements of allocator simpler we could for now calloc just call malloc and memset. With that we could omit a changes that would duplicate malloc changes anyway.
2014-02-25BZ #16632: Change [_BSD/_SVID]_SOURCE warning.Carlos O'Donell3-3/+12
Source packages that need to support both 2.19 and 2.20 will need to decide to use _BSD_SOURCE and _SVID_SOURCE vs. _DEFAULT_SOURCE. The difficulty in making that decision is that __GLIBC_MINOR__ is itself defined in features.h, but you want to set the feature test macros before including features.h. Therefore to ease the transition we should disable the warning if _DEFAULT_SOURCE is also defined. https://sourceware.org/ml/libc-alpha/2014-02/msg00666.html https://sourceware.org/glibc/wiki/Release/2.20#Packaging_Changes
2014-02-25BZ #16613: Support TLS in audit libraries.Carlos O'Donell9-3/+90
This commit fixes a bug where the dynamic loader would crash when loading audit libraries, via LD_AUDIT, where those libraries used TLS. The dynamic loader was not considering that the audit libraries would use TLS and failed to bump the TLS generation counter leaving TLS usage inconsistent after loading the audit libraries. https://sourceware.org/ml/libc-alpha/2014-02/msg00569.html
2014-02-25misc/sys/select.h (__FD_MASK): Avoid signed integer overflow.Florian Weimer3-2/+7
Shifting into the sign position is currently supported as a GCC extension, but explicitly subjected to future changes. Computation in the unsigned type followed by a cast to the signed type is a GCC extension that will be available forever.
2014-02-25ARM: Add SystemTap probes to longjmp and setjmp.Will Newton5-31/+62
Now the ARM port implements pointer encryption for jmpbufs, gdb needs a SystemTap probe point in longjmp to determine the target PC of a call to longjmp. This patch implements the probe point in longjmp and a similar probe point in setjmp. In order to have all the appropriate registers available to pass to the probe this reorders the layout of jmpbuf, putting the sp and lr registers at the start rather than the end, allowing them to be read and written sequentially. Tested on armv7, no new failures in the glibc testsuite and confirmed that this fixes the gdb.base/longjmp.exp failures in the gdb testsuite. ChangeLog: 2014-02-25 Will Newton <will.newton@linaro.org> * sysdeps/arm/__longjmp.S: Include stap-probe.h. (__longjmp): Restore sp and lr before restoring callee saved registers. Add longjmp and longjmp_target SystemTap probe point. * sysdeps/arm/bits/setjmp.h (__jmp_buf): Update comment. * sysdeps/arm/include/bits/setjmp.h (__JMP_BUF_SP): Define to zero to match jmpbuf layout. * sysdeps/arm/setjmp.S: Include stap-probe.h. (__sigsetjmp): Save sp and lr before saving callee saved registers. Add setjmp SystemTap probe point.
2014-02-25S/390: Regenerate ULPs.Stefan Liebler2-30/+4670
2014-02-25Fix race conditions in pldd that may leave the process stopped after detachingAndreas Schwab3-1/+32
Fixes bug 15804
2014-02-22Remove obsolete SHLIB_COMPAT conditionalization in Versions files.Roland McGrath4-48/+9
2014-02-22Remove unused %include lines from Versions files.Roland McGrath3-4/+5
2014-02-21Generate .test-result files for tests with special rules.Joseph Myers26-93/+288
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html> now proposed for inclusion in glibc, extends the generation of PASS and FAIL status in .test-result files for individual tests to cover tests with their own custom makefile rules. This is just adding $(evaluate-test) calls to all such rules, since tests with multiple commands were previously split into separate tests. Note that the tests the makefiles expect to fail (posix/annexc and conformtest) currently get FAIL listed in the .test-result file, rather than XFAIL; a subsequent patch will introduce a better XFAIL mechanism. Tested x86_64. * Makefile ($(objpfx)c++-types-check.out): Use $(evaluate-test). ($(objpfx)check-local-headers.out): Likewise. ($(objpfx)begin-end-check.out): Likewise. * Makerules (check-abi-%.out): Likewise. * catgets/Makefile ($(objpfx)test1.cat): Likewise. ($(objpfx)test2.cat): Likewise. ($(objpfx)de/libc.cat): Likewise. ($(objpfx)test-gencat.out): Likewise. * conform/Makefile ($(objpfx)run-conformtest.out): Likewise. * elf/Makefile ($(objpfx)order-cmp.out): Likewise. ($(objpfx)noload-mem): Likewise. ($(objpfx)tst-pathopt.out): Likewise. ($(objpfx)tst-rtld-load-self.out): Likewise. ($(objpfx)tst-array1-cmp.out): Likewise. ($(objpfx)tst-array1-static-cmp.out): Likewise. ($(objpfx)tst-array2-cmp.out): Likewise. ($(objpfx)tst-array3-cmp.out): Likewise. ($(objpfx)tst-array4-cmp.out): Likewise. ($(objpfx)tst-array5-cmp.out): Likewise. ($(objpfx)tst-array5-static-cmp.out): Likewise. ($(objpfx)check-textrel.out): Likewise. ($(objpfx)check-execstack.out): Likewise. ($(objpfx)check-localplt.out): Likewise. ($(objpfx)order2-cmp.out): Likewise. ($(objpfx)tst-leaks1-mem): Likewise. ($(objpfx)tst-leaks1-static-mem): Likewise. ($(objpfx)tst-initorder-cmp.out): Likewise. ($(objpfx)tst-initorder2-cmp.out): Likewise. ($(objpfx)tst-unused-dep.out): Likewise. ($(objpfx)tst-unused-dep-cmp.out): Likewise. * grp/Makefile ($(objpfx)tst_fgetgrent.out): Likewise. * iconv/Makefile (test-iconvconfig): Likewise. * iconvdata/Makefile ($(objpfx)mtrace-tst-loading): Likewise. ($(objpfx)iconv-test.out): Likewise. ($(objpfx)tst-tables.out): Likewise. * intl/Makefile ($(objpfx)mtrace-tst-gettext): Likewise. ($(objpfx)tst-gettext.out): Likewise. ($(objpfx)tst-translit.out): Likewise. ($(objpfx)tst-gettext2.out): Likewise. ($(objpfx)tst-gettext4.out): Likewise. ($(objpfx)tst-gettext6.out): Likewise. * io/Makefile ($(objpfx)ftwtest.out): Likewise. * libio/Makefile ($(objpfx)test-freopen.out): Likewise. ($(objpfx)tst-fopenloc-cmp.out): Likewise. ($(objpfx)tst-fopenloc-mem.out): Likewise. * malloc/Makefile ($(objpfx)tst-mtrace.out): Likewise. * misc/Makefile ($(objpfx)tst-error1-mem): Likewise. * posix/Makefile ($(objpfx)globtest.out): Likewise. ($(objpfx)wordexp-tst.out): Likewise. ($(objpfx)annexc.out): Likewise. ($(objpfx)tst-fnmatch-mem): Likewise. ($(objpfx)bug-regex2-mem): Likewise. ($(objpfx)bug-regex14-mem): Likewise. ($(objpfx)bug-regex21-mem): Likewise. ($(objpfx)bug-regex31-mem): Likewise. ($(objpfx)tst-vfork3-mem): Likewise. ($(objpfx)tst-rxspencer-no-utf8-mem): Likewise. ($(objpfx)tst-pcre-mem): Likewise. ($(objpfx)tst-boost-mem): Likewise. ($(objpfx)tst-getconf.out): Likewise. ($(objpfx)bug-ga2-mem): Likewise. ($(objpfx)bug-glob2-mem): Likewise. * resolv/Makefile ($(objpfx)mtrace-tst-leaks): Likewise. ($(objpfx)mtrace-tst-leaks2): Likewise. * stdio-common/Makefile ($(objpfx)tst-unbputc.out): Likewise. ($(objpfx)tst-printf.out): Likewise. ($(objpfx)tst-setvbuf1.out): Likewise. ($(objpfx)tst-setvbuf1-cmp.out): Likewise. * stdlib/Makefile ($(objpfx)isomac.out): Likewise. ($(objpfx)tst-fmtmsg.out): Likewise. * string/Makefile ($(objpfx)tst-svc-cmp.out): Likewise. * sysdeps/x86/Makefile ($(objpfx)tst-xmmymm.out): Likewise. localedata: * Makefile ($(objpfx)sort-test.out): Use $(evaluate-test). ($(objpfx)tst-fmon.out): Likewise. ($(objpfx)tst-numeric.out): Likewise. ($(objpfx)tst-locale.out): Likewise. ($(objpfx)tst-rpmatch.out): Likewise. ($(objpfx)tst-trans.out): Likewise. ($(objpfx)tst-mbswcs.out): Likewise. ($(objpfx)tst-ctype.out): Likewise. ($(objpfx)tst-wctype.out): Likewise. ($(objpfx)tst-langinfo.out): Likewise. ($(objpfx)mtrace-tst-leaks): Likewise. nptl: * Makefile ($(objpfx)tst-stack3-mem): Use $(evaluate-test). ($(objpfx)tst-tls6.out): Likewise. ($(objpfx)tst-cleanup0.out): Likewise. ($(objpfx)tst-cleanup0-cmp.out): Likewise. ($(objpfx)tst-cancel-wrappers.out): Likewise. ($(objpfx)tst-oddstacklimit.out): Likewise. nptl_db: * Makefile ($(objpfx)db-symbols.out): Use $(evaluate-test).
2014-02-21Complete _BSD_SOURCE / _SVID_source followup cleanup.Joseph Myers52-178/+255
This patch completes the headers cleanup consequent on removal of _BSD_SOURCE and _SVID_SOURCE (apart from any subsequent deprecations): * #endif conditionals that referred to BSD or SVID are updated. * Redundant __USE_* tests in cases involving __USE_MISC are removed. This includes cases such as __USE_MISC || __USE_ISOC99, where __USE_MISC is redundant (because __USE_MISC is only ever defined in the default / _DEFAULT_SOURCE / _GNU_SOURCE case, when __USE_ISOC99 is also defined; the same applies to the non-XSI-extended POSIX versions), and cases involving __USE_GNU, where __USE_GNU is redundant (because if __USE_GNU is defined, so are the other __USE_* macros). There may well be other cases of __USE_FOO || __USE_BAR tests that could be simplified because one macro implies the other; this patch only addresses cases involving __USE_MISC. Tested x86_64. * bits/fcntl.h [__USE_MISC]: Remove redundant conditionals. * bits/sigaction.h [__USE_MISC]: Likewise. * bits/waitstatus.h: Update #endif comments. * ctype/ctype.h: Likewise. * dirent/dirent.h: Likewise. [__USE_MISC]: Remove redundant conditionals. * grp/grp.h: Update #endif comments. [__USE_GNU]: Remove redundant conditionals. [__USE_MISC]: Likewise. * inet/netinet/in.h [__USE_GNU]: Likewise. * io/sys/stat.h [__USE_MISC]: Likewise. * libio/bits/stdio-ldbl.h [__USE_MISC]: Likewise. * libio/bits/stdio.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * libio/bits/stdio2.h [__USE_MISC]: Likewise. * libio/stdio.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * math/bits/math-finite.h [__USE_MISC]: Likewise. * math/bits/mathcalls.h [__USE_MISC]: Likewise. * math/math.h: Update #else and #endif comments. [__USE_MISC]: Remove redundant conditionals. * misc/sys/uio.h: Update #endif comments. * posix/bits/unistd.h [__USE_MISC]: Remove redundant conditionals. * posix/glob.h [__USE_MISC]: Likewise. * posix/sys/types.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * posix/sys/wait.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * posix/unistd.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * pwd/pwd.h [__USE_GNU]: Likewise. [__USE_MISC]: Likewise. * resolv/netdb.h [__USE_GNU]: Likewise. * signal/signal.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * stdlib/stdlib.h: Update #else and #endif comments. [__USE_MISC]: Remove redundant conditionals. [__USE_GNU]: Likewise. * string/bits/string2.h [__USE_MISC]: Likewise. * string/string.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * sysdeps/m68k/m680x0/fpu/bits/mathinline.h [__USE_MISC]: Likewise. * sysdeps/mach/hurd/bits/fcntl.h [__USE_MISC]: Likewise. * sysdeps/mach/hurd/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/sigaction.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/bits/fcntl-linux.h: Update #endif comments. [__USE_MISC]: Remove redundant conditionals. * sysdeps/unix/sysv/linux/bits/in.h [__USE_GNU]: Likewise. * sysdeps/unix/sysv/linux/bits/sigaction.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/bits/socket.h [__USE_GNU]: Likewise. * sysdeps/unix/sysv/linux/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/sigaction.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/m68k/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/mips/bits/sigaction.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/mips/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/s390/bits/sigaction.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/s390/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sigaction.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/unix/sysv/linux/x86/bits/stat.h [__USE_MISC]: Likewise. * sysdeps/x86/bits/string.h: Update #endif comments. * sysdeps/x86/fpu/bits/mathinline.h [__USE_MISC]: Remove redundant conditionals. * time/sys/time.h: Update #endif comments. * time/time.h: Likewise. [__USE_MISC]: Remove redundant conditionals.
2014-02-21Update ARM ulps for VFPv4 (bug 16600).Yury Gribov3-23/+351
[BZ #16600] * sysdeps/arm/libm-test-ulps: Update for VFPv4.
2014-02-21Add GLIBC_2.17 to librt in Version.defAndreas Schwab2-0/+5
This is needed because the version is used in SHLIB_COMPAT.
2014-02-21Allow sys/auxv.h to be used from the testsuite on powerpc and sparc.Adam Conrad5-4/+13
elf/tst-auxv.c includes misc/sys/auxv.h, which ends up not actually being included due to the guard overlap, and getauxval becomes an implicit declaration and implicit pointer conversion which means, at best, the test isn't actually testing what it thinks it is and, at worst, it'll crash and burn on platforms where implict pointer conversion is a Very Bad Thing. * sysdeps/powerpc/bits/hwcap.h: Allow _SYSDEPS_SYSDEP_H guard as a synonym for _SYS_AUXV_H to allow direct inclusion. * sysdeps/sparc/bits/hwcap.h: Likewise. * sysdeps/powerpc/sysdep.h: Define _SYSDEPS_SYSDEP_H instead of _SYS_AUXV_H so we can include sysdep.h and sys/auxv.h together. * sysdeps/sparc/sysdep.h: Likewise.
2014-02-21Minor formatting fixSiddhesh Poyarekar2-2/+6
2014-02-21print length in strrchr benchtestRajalakshmi Srinivasaraghavan2-1/+5
The return criteria of strrchr() is to read till NULL even if the search character is hit. So its better to print len instead of pos.
2014-02-20Fix __ASSUME_SENDMMSG issues (bug 16611).Joseph Myers14-8/+124
Similar to the issues for accept4 and recvmmsg, __ASSUME_SENDMMSG is also confused about whether it relates to function availability or socketcall operation availability, and the conditions for the definition are always wrong (sendmmsg appeared in Linux kernel 3.0, not 2.6.39); this is now bug 16611. This patch splits the macro into separate macros like those for accept4 and recvmmsg, defining them for appropriate kernel versions. Tested x86_64, including that disassembly of the installed shared libraries is unchanged by this patch. [BZ #16611] * sysdeps/unix/sysv/linux/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030000 && __ASSUME_SOCKETCALL] (__ASSUME_SENDMMSG_SOCKETCALL): Define. [__LINUX_KERNEL_VERSION >= 0x030000 && (__i386__ || __x86_64__ || __powerpc__ || __sh__ || __sparc__)] (__ASSUME_SENDMMSG_SYSCALL): Likewise. [__i386__ || __powerpc__ || __sh__ || __sparc__] (__ASSUME_SENDMMSG_SYSCALL_WITH_SOCKETCALL): Likewise. [__ASSUME_SENDMMSG_SOCKETCALL || __ASSUME_SENDMMSG_SYSCALL] (__ASSUME_SENDMMSG): Define instead of using previous [__LINUX_KERNEL_VERSION >= 0x020627] condition. * sysdeps/unix/sysv/linux/aarch64/kernel-features.h (__ASSUME_SENDMMSG_SYSCALL): Define. * sysdeps/unix/sysv/linux/alpha/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030200] (__ASSUME_SENDMMSG_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/arm/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/ia64/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/internal_sendmmsg.S [__ASSUME_SOCKETCALL && !__ASSUME_SENDMMSG_SYSCALL_WITH_SOCKETCALL && !__ASSUME_SENDMMSG_SYSCALL] (__NR_sendmmsg): Undefine. [__ASSUME_SENDMMSG]: Change conditionals to [__ASSUME_SENDMMSG_SOCKETCALL]. * sysdeps/unix/sysv/linux/microblaze/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030300] (__ASSUME_SENDMMSG_SYSCALL): Define. * sysdeps/unix/sysv/linux/mips/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030100] (__ASSUME_SENDMMSG_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/sendmmsg.c [__ASSUME_SOCKETCALL && !__ASSUME_SENDMMSG_SYSCALL_WITH_SOCKETCALL && !__ASSUME_SENDMMSG_SYSCALL] (__NR_sendmmsg): Undefine. [!__ASSUME_SENDMMSG]: Change conditional to [!__ASSUME_SENDMMSG_SOCKETCALL]. * sysdeps/unix/sysv/linux/tile/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030000] (__ASSUME_SENDMMSG_SYSCALL): Define. * sysdeps/unix/sysv/linux/hppa/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030100] (__ASSUME_SENDMMSG_SYSCALL): Define.
2014-02-20Fix __ASSUME_RECVMMSG issues (bug 16610).Joseph Myers14-8/+117
Similar to the issues for accept4, __ASSUME_RECVMMSG is also confused about whether it relates to function availability or socketcall operation availability; this is now bug 16610. Nothing actually tests __ASSUME_RECVMMSG for function availability, but implicit in the definition in kernel-features.h is the idea that it makes sense when the syscall is available and socketcall is not being used. As with accept4, there are architectures where the syscall was added later than the socketcall operation, meaning that assuming glibc is built with recent enough kernel headers, it does not attempt to use socketcall for these operations and __ASSUME_RECVMMSG gets defined for kernels >= 2.6.33 even when the syscall was only added later. This patch splits the macro into separate macros like those used for accept4; having similar macro structure in both cases (and for sendmmsg once I've dealt with that) seems likely to be less confusing than having a different structure on the basis of nothing actually needing to assume the recvmmsg function works. Appropriate definitions are added for all architectures. Architecture-specific note: Tile's kernel-features.h says "TILE glibc support starts with 2.6.36", which is accurate in that 2.6.36 was the first kernel version with Tile support, and on that basis I've made that header define __ASSUME_RECVMMSG_SYSCALL unconditionally. However, Tile's configure.ac has arch_minimum_kernel=2.6.32. Since arch_minimum_kernel is meant to reflect only kernel.org kernel versions, I think that should change to 2.6.36. (If using glibc with kernel versions from before a port went in kernel.org, it's your responsibility to change arch_minimum_kernel in a local patch, and at the same time to adjust any __ASSUME_* definitions that may not be correct for your older kernel; for developing the official glibc it should only ever be necessary to consider what official kernel.org releases support.) Tested x86_64, including that disassembly of the installed shared libraries is unchanged by this patch. [BZ #16610] * sysdeps/unix/sysv/linux/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x020621 && __ASSUME_SOCKETCALL] (__ASSUME_RECVMMSG_SOCKETCALL): Define. [(__LINUX_KERNEL_VERSION >= 0x020621 && (__i386__ || __x86_64__ || __sparc__)) || (__LINUX_KERNEL_VERSION >= 0x020625 && (__powerpc__ || __sh__))] (__ASSUME_RECVMMSG_SYSCALL): Likewise. [__i386__ || __sparc__] (__ASSUME_RECVMMSG_SYSCALL_WITH_SOCKETCALL): Likewise. [__ASSUME_RECVMMSG_SOCKETCALL || __ASSUME_RECVMMSG_SYSCALL] (__ASSUME_RECVMMSG): Define instead of using previous [__LINUX_KERNEL_VERSION >= 0x020621] condition. * sysdeps/unix/sysv/linux/aarch64/kernel-features.h (__ASSUME_RECVMMSG_SYSCALL): Define. * sysdeps/unix/sysv/linux/alpha/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/arm/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/ia64/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/internal_recvmmsg.S [__ASSUME_SOCKETCALL && !__ASSUME_RECVMMSG_SYSCALL_WITH_SOCKETCALL && !__ASSUME_RECVMMSG_SYSCALL] (__NR_recvmmsg): Undefine. [__ASSUME_RECVMMSG]: Change condition to [__ASSUME_RECVMMSG_SOCKETCALL]. * sysdeps/unix/sysv/linux/microblaze/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL): Define. (__ASSUME_RECVMMSG_SYSCALL_WITH_SOCKETCALL): Likewise. * sysdeps/unix/sysv/linux/mips/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_RECVMMSG_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/recvmmsg.c [__ASSUME_SOCKETCALL && !__ASSUME_RECVMMSG_SYSCALL_WITH_SOCKETCALL && !__ASSUME_RECVMMSG_SYSCALL] (__NR_recvmmsg): Undefine. [!__ASSUME_RECVMMSG]: Change condition to [!__ASSUME_RECVMMSG_SOCKETCALL]. * sysdeps/unix/sysv/linux/tile/kernel-features.h (__ASSUME_RECVMMSG_SYSCALL): Define. * sysdeps/unix/sysv/linux/hppa/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x020622] (__ASSUME_RECVMMSG_SYSCALL): Define.
2014-02-20Fix __ASSUME_ACCEPT4 issues (bug 16609).Joseph Myers16-23/+151
In <https://sourceware.org/ml/libc-alpha/2013-12/msg00008.html>, Aurelien noted issues with the definition of __ASSUME_ACCEPT4, which I discussed in more detail in <https://sourceware.org/ml/libc-alpha/2013-12/msg00014.html>; these are now bug 16609. As previously noted, __ASSUME_ACCEPT4 is used in two ways: * In OS-independent code, to mean "accept4 can be assumed to work rather than fail with ENOSYS". It doesn't matter whether it's implemented with socketcall or a separate syscall. * In Linux-specific code, to mean "the socketcall multiplex syscall can be assumed to handle the accept4 operation. When used in Linux-specific code, it *never* refers to anything relating to the accept4 syscall, only to the socketcall multiplexer. This patch splits the macro into separate __ASSUME_ACCEPT4_SOCKETCALL, __ASSUME_ACCEPT4_SYSCALL and __ASSUME_ACCEPT4 to clarify the different cases involved. A macro __ASSUME_SOCKETCALL is added for convenience in writing logic relating to all socketcall architectures. In addition, to address the issue of architectures where socketcall support for accept4 was added before a separate syscall was added (and so the separate syscall should not be used unless known to be present or fallback to socketcall is available), a fourth macro __ASSUME_ACCEPT4_SYSCALL_WITH_SOCKETCALL is added to indicate that the syscall became available at the same time as socketcall support. This is then used in the relevant places in a conditional determining whether to undefine __NR_accept4 (the simple approach to avoiding the syscall's presence causing problems; I didn't try to implement runtime fallback from the syscall to socketcall). Architecture-specific note: alpha defined __ASSUME_ACCEPT4 for 2.6.33 and later, but actually the syscall was added for alpha in 3.2, so this patch uses the correct condition for __ASSUME_ACCEPT4_SYSCALL there. Tested x86_64, including that disassembly of the installed shared libraries is unchanged by this patch. [BZ #16609] * sysdeps/unix/sysv/linux/kernel-features.h [__i386__ || __powerpc__ || __s390__ || __sh__ || __sparc__] (__ASSUME_SOCKETCALL): Define. [__LINUX_KERNEL_VERSION && __ASSUME_SOCKETCALL] (__ASSUME_ACCEPT4_SOCKETCALL): Likewise. [(__LINUX_KERNEL_VERSION >= 0x02061c && (__x86_64__ || __sparc__)) || (__LINUX_KERNEL_VERSION >= 0x020625 && (__powerpc__ || __sh__))] (__ASSUME_ACCEPT4_SYSCALL): Likewise. [__sparc__] (__ASSUME_ACCEPT4_SYSCALL_WITH_SOCKETCALL): Likewise. [__ASSUME_ACCEPT4_SOCKETCALL || __ASSUME_ACCEPT4_SYSCALL] (__ASSUME_ACCEPT4): Define instead of using previous [__LINUX_KERNEL_VERSION >= 0x02061c && (__i386__ || __x86_64__ || __powerpc__ || __sparc__ || __s390__)] condition. * sysdeps/unix/sysv/linux/aarch64/kernel-features.h (__ASSUME_ACCEPT4): Change to __ASSUME_ACCEPT4_SYSCALL. * sysdeps/unix/sysv/linux/accept4.c [__ASSUME_SOCKETCALL && !__ASSUME_ACCEPT4_SYSCALL_WITH_SOCKETCALL && !__ASSUME_ACCEPT4_SYSCALL] (__NR_accept4): Undefine. [!__ASSUME_ACCEPT4]: Change condition to [!__ASSUME_ACCEPT4_SOCKETCALL]. * sysdeps/unix/sysv/linux/alpha/kernel-features.h (__ASSUME_ACCEPT4): Change to __ASSUME_ACCEPT4_SYSCALL. Correct condition to [__LINUX_KERNEL_VERSION >= 0x030200]. * sysdeps/unix/sysv/linux/arm/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x020624] (__ASSUME_ACCEPT4): Change to __ASSUME_ACCEPT4_SYSCALL. * sysdeps/unix/sysv/linux/i386/accept4.S [__ASSUME_ACCEPT4]: Change conditions to [__ASSUME_ACCEPT4_SOCKETCALL]. * sysdeps/unix/sysv/linux/ia64/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x030300] (__ASSUME_ACCEPT4): Change to __ASSUME_ACCEPT4_SYSCALL. * sysdeps/unix/sysv/linux/internal_accept4.S [__ASSUME_SOCKETCALL && !__ASSUME_ACCEPT4_SYSCALL_WITH_SOCKETCALL && !__ASSUME_ACCEPT4_SYSCALL] (__NR_accept4): Undefine. [__ASSUME_ACCEPT4]: Change condition to [__ASSUME_ACCEPT4_SOCKETCALL]. * sysdeps/unix/sysv/linux/m68k/kernel-features.h (__ASSUME_SOCKETCALL): Define. [__LINUX_KERNEL_VERSION >= 0x02061c] (__ASSUME_ACCEPT4): Remove. * sysdeps/unix/sysv/linux/microblaze/kernel-features.h (__ASSUME_SOCKETCALL): Define. (__ASSUME_ACCEPT4): Remove. [__LINUX_KERNEL_VERSION >= 0x020621] (__ASSUME_ACCEPT4_SYSCALL): Define. * sysdeps/unix/sysv/linux/mips/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x02061f] (__ASSUME_ACCEPT4_SYSCALL): Likewise. * sysdeps/unix/sysv/linux/tile/kernel-features.h (__ASSUME_ACCEPT4): Change to __ASSUME_ACCEPT4_SYSCALL. * sysdeps/unix/sysv/linux/hppa/kernel-features.h [__LINUX_KERNEL_VERSION >= 0x020622] (__ASSUME_ACCEPT4_SYSCALL): Define.
2014-02-20Update ARM HWCAP data.Joseph Myers4-3/+17
This patch updates the ARM HWCAP data (both bits/hwcap.h and dl-procinfo.[ch]) to match Linux 3.13. * sysdeps/unix/sysv/linux/arm/bits/hwcap.h (HWCAP_ARM_VFPD32): New macro. (HWCAP_ARM_LPAE): Likewise. (HWCAP_ARM_EVTSTRM): Likewise. * sysdeps/unix/sysv/linux/arm/dl-procinfo.c (_dl_arm_cap_flags): Add vpfd32, lpae and evtstrm. * sysdeps/unix/sysv/linux/arm/dl-procinfo.h (_DL_HWCAP_COUNT): Increase to 22.
2014-02-19Move tests of clog10 from libm-test.inc to auto-libm-test-in.Joseph Myers6-164/+34006
This patch moves tests of clog10 to auto-libm-test-in. Note that this means gen-auto-libm-tests will now depend on the recent MPC 1.0.2 release which added a fix for a bug that made gen-auto-libm-tests hang for clog10. (It still can't conveniently be used for cacos cacosh casin casinh catan catanh csin csinh because of extreme slowness of those functions for special cases in MPC; at least some slow cases of csin / csinh are fixed in MPC trunk, but not in a release.) Tested x86_64 and x86 and ulps updated accordingly. * math/auto-libm-test-in: Add tests of clog10. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (clog10_test_data): Use AUTO_TESTS_c_c. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2014-02-19Properly fix memory leak in _nss_dns_gethostbyname4_r with big DNS answerAndreas Schwab8-49/+95
Instead of trying to guess whether the second buffer needs to be freed set a flag at the place it is allocated
2014-02-18Move tests of fma from libm-test.inc to auto-libm-test-in.Joseph Myers5-901/+15468
This patch moves tests of fma to auto-libm-test-in, adding the required support to gen-auto-libm-tests. Because fma can have exact zero results depending on the rounding mode, results of fma cannot always be determined from a single value computed in higher precision with a sticky bit. Thus, this patch adds support for recomputing results with the original MPFR/MPC function in the case where an exact zero is involved. (This also affects some results for cpow; when we start testing cpow in all rounding modes, I think it will be most appropriate to make those tests use IGNORE_ZERO_INF_SIGN, since ISO C does not attempt to determine signs of zero results, or special caes in general, for cpow, and I think signs of zero for cpow are beyond the scope of glibc's accuracy goals.) Simply treating the existing test inputs for fma like those for other functions (i.e., as representing the given value rounded up or down to any of the supported floating-point formats) increases the size of auto-libm-test-out by about 16MB (i.e., about half the file is fma test data). While rounded versions of tests are perfectly reasonable test inputs for fma, in this case having them seems excessive, so this patch allows functions to specify in gen-auto-libm-tests that the given test inputs are only to be interpreted exactly, not as corresponding to values rounded up and down. This reduces the size of the generated test data for fma to a more reasonable 2MB. A consequence of this patch is that fma is now tested for correct presence or absence of "inexact" exceptions, where previously this wasn't tested because I didn't want to try to add that test coverage manually to all the existing tests. As far as I know, the existing fma implementations are already correct in this regard. This patch provides the first cases where the gen-auto-libm-tests support for distinguishing before-rounding/after-rounding underflow actually produces separate entries in auto-libm-test-out (for functions without exactly determined results, the affected cases are all considered underflow-optional, so this only affects functions like fma with exactly determined results). I didn't see any signs of problems with this logic in the output. Tested x86_64 and x86. * math/auto-libm-test-in: Add tests of fma. * math/auto-libm-test-out: Regenerated. * math/libm-test.inc (fma_test_data): Use AUTO_TESTS_fff_f. (fma_towardzero_test_data): Likewise. (fma_downward_test_data): Likewise. (fma_upward_test_data): Likewise. * math/gen-auto-libm-tests.c (rounding_mode_desc): Add field mpc_mode. (rounding_modes): Add values for new field. (func_calc_method): Add value mpfr_fff_f. (func_calc_desc): Add mpfr_fff_f union field. (test_function): Add field exact_args. (FUNC): Add macro argument EXACT_ARGS. (FUNC_mpfr_f_f): Update call to FUNC. (FUNC_mpfr_f_f): Likewise. (FUNC_mpfr_ff_f): Likewise. (FUNC_mpfr_if_f): Likewise. (FUNC_mpc_c_f): Likewise. (FUNC_mpc_c_c): Likewise. (test_functions): Add fma. Update calls to FUNC. (handle_input_arg): Add argument exact_args. (add_test): Update call to handle_input_arg. (calc_generic_results): Add argument mode. Handle mpfr_fff_f. (output_for_one_input_case): Update call to calc_generic_results. Recalculate exact zero results in each rounding mode.
2014-02-18Fix gen-auto-libm-tests sticky bit setting for negative results.Joseph Myers6-4338/+4479
gen-auto-libm-tests has a bug in the logic for setting a sticky bit based on the ternary value from MPFR: it is correct for positive results, but for negative results mpz_setbit acts as if a two's complement representation is used, whereas the low bit needs setting based on the sign-magnitude representation GMP actually uses. (This showed up in converting fma tests to use auto-libm-test-in / gen-auto-libm-tests.) This patch fixes the problem by negating the mpz_t value to set its low bit. There are lots of changes to auto-libm-test-out (mainly 1ulp fixes to ldbl-128 expected results), but only a few ulps updates are needed on x86 / x86_64. In one case, a corrected expectation showed up a spurious underflow exception where the correct result is slightly outside the underflowing range. Tested x86_64 and x86 and ulps updated accordingly. * math/gen-auto-libm-tests.c (adjust_real): Ensure integers are non-negative before setting low bit. * math/auto-libm-test-in: Mark one asin test possibly having spurious underflow. * math/auto-libm-test-out: Regenerated. * sysdeps/i386/fpu/libm-test-ulps: Update. * sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
2014-02-17[MicroBlaze]: Move MicroBlaze from ports to sysdeps.David Holsgrove100-0/+14
2014-02-17 David Holsgrove <david.holsgrove@xilinx.com> * sysdeps/microblaze: Move directory from ports/sysdeps/microblaze. * sysdeps/unix/sysv/linux/microblaze: Move directory from ports/sysdeps/unix/sysv/linux/microblaze. * README: Add missing listing for microblaze*-*-linux-gnu. Signed-off-by: David Holsgrove <david.holsgrove@xilinx.com>
2014-02-16Deduplicate resolv/nss_dns/dns-host.cOndřej Bílka1-10/+7
In resolv/nss_dns/dns-host.c one of code path duplicated code after that. We merge these paths.
2014-02-16ia64: relocate out of ports/ subdirMike Frysinger512-125/+33
2014-02-15Generate .test-result files for ordinary tests.Tomas Dohnalek5-4/+62
This patch, an updated version of <https://sourceware.org/ml/libc-alpha/2014-01/msg00193.html>, starts the process of generating explicit PASS or FAIL status for individual glibc tests. It's based on Tomas Dohnalek's patch <https://sourceware.org/ml/libc-alpha/2012-10/msg00278.html>, but is deliberately more minimal: it doesn't try to cover any tests outside of $(tests) / $(xtests) (that's for a later patch), nor does it put the result together in an overall summary file (again, a later patch): it just generates the .test-result files. Thus, this patch keeps the overall logic for when a testsuite run finishes completely unchanged: a test failing will terminate the run. I think we *should* move to a more conventional approach where plain "make check" does not terminate for an individual test failure, unless e.g. you say "make stop-on-test-failure=y check", but that sort of policy change is best done as a separate patch once the infrastructure is in place to generate summary files for completed test runs (which will entirely consist of PASS and XFAIL lines if the testsuite run reaches the point of generating them, until such a policy change is made). Tested x86_64. 2014-02-14 Tomas Dohnalek <tdohnale@redhat.com> Joseph Myers <joseph@codesourcery.com> * Makeconfig (test-name): New variable. (evaluate-test): Likewise. * Makerules (do-test-clean): Remove .test-result files. (common-mostlyclean): Likewise. * Rules ($(objpfx)%.out): Use $(evaluate-test) in both rules. * scripts/evaluate-test.sh: New file.
2014-02-14Split up rules for tests using mtrace and something else.Joseph Myers4-18/+39
Most glibc tests that use mtrace to verify that there were no memory leaks from the glibc facilities used in a given test depend on the .out file of the previous test so that the mtrace test runs mtrace and nothing else. Two, however, have a single target combining mtrace with something else. In the case of libio/tst-fopenloc.check, the test both compares the output with an expected baseline and runs mtrace. In the case of posix/tst-rxspencer-mem, the test is run (with different command line from the main run) and then mtrace is run, from the same makefile target. This patch splits both of these tests up to use separate makefile targets for each thing tested; in the tst-rxspencer case, a file tst-rxspencer-no-utf8.c is created that just includes tst-rxspencer.c, as is usual for tests where the same code gets tested in different compile-time or runtime configurations. Adding $(evaluate-test) to test commands, as in <https://sourceware.org/ml/libc-alpha/2014-01/msg00194.html>, will no longer need to insert && between multiple commands, as all tests will either have just a single command or already use &&. Tested x86_64. * libio/Makefile ($(objpfx)tst-fopenloc.check): Split into separate $(objpfx)tst-fopenloc-cmp.out and $(objpfx)tst-fopenloc-mem.out targets. (tests): Update dependencies. * posix/Makefile (tests variable): Add tst-rxspencer-no-utf8. (generated): Change tst-rxspencer-mem and tst-rxspencer.mtrace to tst-rxspencer-no-utf8-mem and tst-rxspencer-no-utf8.mtrace. (tst-rxspencer-no-utf8-ARGS): New variable. (tst-rxspencer-no-utf8-ENV): Likewise. (tests target): Depend on $(objpfx)tst-rxspencer-no-utf8-mem instead of $(objpfx)tst-rxspencer-mem. ($(objpfx)tst-rxspencer-mem): Change target to $(objpfx)tst-rxspencer-no-utf8-mem. Depend on $(objpfx)tst-rxspencer-no-utf8.out instead of running test program. * posix/tst-rxspencer-no-utf8.c: New file.
2014-02-14Split up rules for tests that compare output with baselines.Joseph Myers6-50/+124
This patch splits makefile rules that generate a file then run cmp to check the contents of that file into separate rules to generate and compare the file. This simplifies making those tests generate PASS / FAIL results, by removing the need to insert && between commands in the test so that a $(evaluate-test) call is reached. It also avoids the oddity of the .out file being an intermediate file rather than the final result generated, as noted for some of these tests in <https://sourceware.org/ml/libc-alpha/2012-10/msg00894.html>. In many cases, the rule to run the program was no longer needed because the default rules for running test programs on the host to generate a .out file sufficed. (I'm not asserting the commands run after this patch are *exactly* the same as before, simply that the rules did nothing special that appeared deliberate or relevant to anything about what the tests were testing. In cases where the rules redirected stderr as well as stdout, I left the existing rule's redirection in place to avoid changing what gets compared with the expected results.) It's clear there is a lot in common between the various -cmp.out rules and it might be possible in future to refactor them into more generic support for the case of comparing test output against a baseline. (Some baselines are *.exp, some *.expect, some directly embedded in the makefiles, and nptl/tst-cleanupx0.expect appears unused.) Tested x86_64. * elf/Makefile ($(objpfx)order.out): Remove rule. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)order-cmp.out. ($(objpfx)order-cmp.out): New rule. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)tst-array1-cmp.out, $(objpfx)tst-array1-static-cmp.out, $(objpfx)tst-array2-cmp.out, $(objpfx)tst-array3-cmp.out, $(objpfx)tst-array4-cmp.out, $(objpfx)tst-array5-cmp.out and $(objpfx)tst-array5-static-cmp.out. ($(objpfx)tst-array1.out): Remove rule. ($(objpfx)tst-array1-cmp.out): New rule. ($(objpfx)tst-array1-static.out): Remove rule. ($(objpfx)tst-array1-static-cmp.out): New rule. ($(objpfx)tst-array2.out): Remove rule. ($(objpfx)tst-array2-cmp.out): New rule. ($(objpfx)tst-array3.out): Remove rule. ($(objpfx)tst-array3-cmp.out): New rule. ($(objpfx)tst-array4.out): Remove rule. ($(objpfx)tst-array4-cmp.out): New rule. ($(objpfx)tst-array5.out): Remove rule. ($(objpfx)tst-array5-cmp.out): New rule. ($(objpfx)tst-array5-static.out): Remove rule. ($(objpfx)tst-array5-static-cmp.out): New rule. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)order2-cmp.out. ($(objpfx)order2.out): Remove rule. ($(objpfx)order2-cmp.out): New rule. ($(objpfx)tst-initorder.out): Remove rule. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)tst-initorder-cmp.out. ($(objpfx)tst-initorder-cmp.out): New rule. ($(objpfx)tst-initorder2.out): Remove rule. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)tst-initorder2-cmp.out. ($(objpfx)tst-initorder2-cmp.out): New rule. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)tst-unused-dep-cmp.out. ($(objpfx)tst-unused-dep-cmp.out): Do not run cmp. ($(objpfx)tst-unused-dep-cmp.out): New rule. * stdio-common/Makefile [$(run-built-tests) = yes] (tests): Depend on $(objpfx)tst-setvbuf1-cmp.out. ($(objpfx)tst-setvbuf1.out): Do not run cmp. ($(objpfx)tst-setvbuf1-cmp.out): New rule. * string/Makefile [$(run-built-tests) = yes] (tests): Depend $(objpfx)tst-svc-cmp.out instead of $(objpfx)tst-svc.out. ($(objpfx)tst-svc.out): Remove rule. ($(objpfx)tst-svc-cmp.out): New rule. nptl: * Makefile ($(objpfx)tst-cleanup0.out): Do not run cmp. [$(run-built-tests) = yes] (tests): Depend on $(objpfx)tst-cleanup0-cmp.out. ($(objpfx)tst-cleanup0-cmp.out): New rule.
2014-02-13Clean up trivially redundant __USE_MISC conditionals.Joseph Myers14-33/+46
This patch cleans up cases of __USE_MISC that are trivially redundant after the recent substitution of __USE_MISC for __USE_BSD and __USE_SVID: either in constructs such as "defined __USE_MISC || defined __USE_MISC", or else (in the bits/mman.h case) a conditional on __USE_MISC nested inside another __USE_MISC conditional. (The cleanups remaining after this patch are still quite large, but it seems a reasonable piece to separate out.) Tested x86_64. * bits/mman.h [__USE_MISC]: Remove redundant conditionals. * ctype/ctype.h [__USE_MISC]: Likewise. * dirent/dirent.h [__USE_MISC]: Likewise. * grp/grp.h [__USE_MISC]: Likewise. * io/fcntl.h [__USE_MISC]: Likewise. * io/sys/stat.h [__USE_MISC]: Likewise. * libio/stdio.h [__USE_MISC]: Likewise. * posix/unistd.h [__USE_MISC]: Likewise. * pwd/pwd.h [__USE_MISC]: Likewise. * stdlib.h [__USE_MISC]: Likewise. * string/bits/string2.h [__USE_MISC]: Likewise. * string/string.h [__USE_MISC]: Likewise. * time/time.h [__USE_MISC]: Likewise.
2014-02-13Fix memory leak in _nss_dns_gethostbyname4_r with big DNS answerAndreas Schwab3-3/+17
2014-02-13Update MIPS math-tests.h for GCC 4.9 using soft-fp.Joseph Myers3-4/+2207
GCC trunk now uses soft-fp for MIPS64 long double, so supporting integration with hardware exceptions and rounding modes. This patch updates MIPS math-tests.h accordingly not to disable exception and rounding mode tests in this case. Tested mips64 and ulps updated to reflect the newly run tests. * sysdeps/mips/math-tests.h: Include <features.h>. [!__mips_soft_float && _MIPS_SIM != _ABIO32 && __GNUC_PREREQ (4, 9)] (ROUNDING_TESTS_long_double): Do not define. [!__mips_soft_float && _MIPS_SIM != _ABIO32 && __GNUC_PREREQ (4, 9)] (EXCEPTION_TESTS_long_double): Likewise. * sysdeps/mips/mips64/libm-test-ulps: Update.
2014-02-12Combine __USE_BSD and __USE_SVID into __USE_MISC.Joseph Myers65-229/+301
This patch cleans up following the obsoletion of _BSD_SOURCE and _SVID_SOURCE by combining __USE_BSD and __USE_SVID into __USE_MISC. The only non-mechanical part of this patch is the changes to features.h; everything else is simple substitution of __USE_MISC for the old macros. Thus, this patch leaves obviously redundant conditionals such as "defined __USE_MISC || defined __USE_MISC", and does not update #endif comments where they referred to BSD or SVID in words instead of the literal macro name. This is intended to facilitate patch review by separating the less mechanical changes from these purely mechanical changes into a separate patch. (I do intend to integrate all the changes from <https://sourceware.org/ml/libc-alpha/2013-12/msg00226.html>, which I believe includes all the trailing comment updates, in subsequent patches.) Tested x86_64. * include/features.h (__USE_BSD): Remove macro definitions. (__USE_SVID): Likewise. (_BSD_SOURCE): Likewise. (_SVID_SOURCE): Likewise. [!defined _BSD_SOURCE && !defined _SVID_SOURCE]: Remove condition from definition of _DEFAULT_SOURCE. [_BSD_SOURCE || _SVID_SOURCE]: Change condition to [_DEFAULT_SOURCE]. * bits/fcntl.h [__USE_BSD]: Change condition to [__USE_MISC]. * bits/mman.h [__USE_BSD]: Likewise. * bits/termios.h [__USE_BSD]: Likewise. * bits/waitstatus.h [__USE_BSD]: Likewise. * ctype/ctype.h [__USE_SVID]: Likewise. * dirent/dirent.h [__USE_BSD]: Likewise. * grp/grp.h [__USE_SVID]: Likewise. [__USE_BSD]: Likewise. * inet/netinet/igmp.h [__USE_BSD]: Likewise. * io/fcntl.h [__USE_BSD]: Likewise. * io/ftw.h [__USE_BSD]: Likewise. * io/sys/stat.h [__USE_BSD]: Likewise. * libio/bits/stdio-ldbl.h [__USE_BSD]: Likewise. * libio/bits/stdio2.h [__USE_BSD]: Likewise. * libio/stdio.h [__USE_SVID]: Likewise. [__USE_BSD]: Likewise. * math/math.h [__USE_SVID]: Likewise. [__USE_BSD]: Likewise. * misc/bits/syslog-ldbl.h [__USE_BSD]: Likewise. * misc/bits/syslog.h [__USE_BSD]: Likewise. * misc/search.h [__USE_SVID]: Likewise. * misc/sys/mman.h [__USE_BSD]: Likewise. * misc/sys/syslog.h [__USE_BSD]: Likewise. * misc/sys/uio.h [__USE_BSD]: Likewise. * posix/bits/unistd.h [__USE_BSD]: Likewise. * posix/glob.h [__USE_BSD]: Likewise. * posix/regex.h [__USE_BSD]: Likewise. * posix/sys/types.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * posix/sys/utsname.h [__USE_SVID]: Likewise. * posix/sys/wait.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * posix/unistd.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * pwd/pwd.h [__USE_SVID]: Likewise. * resolv/netdb.h [__USE_BSD]: Likewise. * setjmp/setjmp.h [__USE_BSD]: Likewise. * signal/signal.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * socket/sys/socket.h [__USE_BSD]: Likewise. * stdlib/fmtmsg.h [__USE_SVID]: Likewise. * stdlib/stdlib.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * string/bits/string2.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * string/bits/string3.h [__USE_BSD]: Likewise. * string/endian.h [__USE_BSD]: Likewise. * string/string.h [__USE_SVID]: Likewise. [__USE_BSD]: Likewise. * string/strings.h [__USE_BSD]: Likewise. * sysdeps/generic/netinet/ip.h [__USE_BSD]: Likewise. * sysdeps/gnu/netinet/ip_icmp.h [__USE_BSD]: Likewise. * sysdeps/mach/hurd/bits/fcntl.h [__USE_BSD]: Likewise. * sysdeps/mach/hurd/bits/stat.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/mman.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/termios.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/bits/mman-linux.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/bits/sys_errlist.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/bits/termios.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/mips/bits/termios.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/netinet/if_ether.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/netinet/if_fddi.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/netinet/if_tr.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios.h [__USE_BSD]: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios.h [__USE_BSD]: Likewise. * sysdeps/x86/bits/string.h [__USE_BSD]: Likewise. * sysvipc/sys/ipc.h [__USE_SVID]: Likewise. * termios/termios.h [__USE_BSD]: Likewise. * time/sys/time.h [__USE_BSD]: Likewise. * time/time.h [__USE_BSD]: Likewise. [__USE_SVID]: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/mman.h [__USE_BSD]: Change condition to [__USE_MISC].
2014-02-12Remove reference to subdir_lint.out.Joseph Myers2-1/+3
The toplevel Makefile's subdir_targets variable refers to subdir_lint.out. As far as I can tell, this is not defined or referenced anywhere else in the tree. Having .out makefile references that don't refer to the output from testcases seems confusing; this patch removes the reference to subdir_lint.out. Tested x86_64. * Makefile (subdir_targets): Remove subdir_lint.out.
2014-02-12Remove indirection in stdio-common tests dependencies.Joseph Myers2-4/+6
stdio-common/Makefile has the tests target depend on two test output files indirectly through rules do-tst-unbputc and do-tst-printf. I see no reason for such an indirection, and everywhere else the tests just depend on the output files directly, so this patch removes the indirection. Tested x86_64. * stdio-common/Makefile (do-tst-unbputc): Remove target. (do-tst-printf): Likewise. (tests): Depend directly on $(objpfx)tst-unbputc.out and $(objpfx)tst-printf.out.
2014-02-12Stop io/ftwtest deleting its own output.Joseph Myers2-1/+3
If you rerun "make check" in a tree where some tests have already been run, it will rerun io/ftwtest-sh because that test uses ftwtest.out, the same name to which output is redirected, as its internal temporary file, and then removes it on exit. Clearly tests should not be removing the files to which their output is redirected like that. This patch changes the script to use a different file as its internal temporary file, so the actual output referenced in the makefile isn't removed. Tested x86_64. * io/ftwtest-sh (testout): Change to $tmp/ftwtest-tmp.out.
2014-02-12Make ABI tests generate .out files.Joseph Myers3-10/+21
If you rerun "make check" in a tree where some tests have already been run, it will rerun ABI tests because those do not create an output file. This patch changes those tests to create .out files so they only get rerun if the dependencies (on the ABI baselines and the generated .symlist files) indicate they should be rerun. Tested x86_64. * Makerules (check-abi-%): Change target to $(objpfx)check-abi-%.out. (check-abi target): Update dependencies. (check-abi-pattern variable): Redirect output of diff to $@. (check-abi variable): Likewise. * elf/Makefile (check-abi): Update dependencies.
2014-02-12soft-fp: support after-rounding tininess detection.Joseph Myers13-4/+87
IEEE 754-2008 defines two ways in which tiny results can be detected, "before rounding" (based on the infinite-precision result) and "after rounding" (based on the result when rounded to normal precision as if the exponent range were unbounded). All binary operations on an architecture must use the same choice of how tininess is detected. soft-fp has so far implemented only before-rounding tininess detection. This patch adds support for after-rounding tininess detection. A new macro _FP_TININESS_AFTER_ROUNDING is added that sfp-machine.h must define (soft-fp is meant to be self-contained so the existing tininess.h files aren't used here, though the information going in sfp-machine.h has been taken from them). The soft-fp macros dealing with raising underflow exceptions then handle the cases where the choice matters specially, rounding a copy of the input to the appropriate precision to see if a value that's tiny before rounding isn't tiny after rounding. Tested for mips64 using GCC trunk (which now uses soft-fp on MIPS, so supporting exceptions and rounding modes for long double where not previously supported - this is the immediate motivation for doing this patch now) together with (a) a patch to sysdeps/mips/math-tests.h to enable exceptions / rounding modes tests for long double for GCC 4.9 and later, and (b) corresponding changes applied to libgcc's soft-fp and sfp-machine.h files. In the libgcc context this is also tested on x86_64 (also an after-rounding architecture) with testcases for __float128 that I intend to add to the GCC testsuite when updating soft-fp there. (To be clear: this patch does not fix any glibc bugs that were user-visible in past releases, since after-rounding architectures didn't use soft-fp in any affected case with support for floating-point exceptions - so there is no corresponding Bugzilla bug. Rather, it works together with the GCC changes to use soft-fp on MIPS to allow previously absent long double functionality to work properly, and allows soft-fp to be used in glibc on after-rounding architectures in cases where it couldn't previously be used.) * soft-fp/op-common.h (_FP_DECL): Mark exponent as possibly unused. (_FP_PACK_SEMIRAW): Determine tininess based on rounding shifted value if _FP_TININESS_AFTER_ROUNDING and unrounded value is in subnormal range. (_FP_PACK_CANONICAL): Determine tininess based on rounding to normal precision if _FP_TININESS_AFTER_ROUNDING and unrounded value has largest subnormal exponent. * soft-fp/soft-fp.h [FP_NO_EXCEPTIONS] (_FP_TININESS_AFTER_ROUNDING): Undefine and redefine to 0. * sysdeps/aarch64/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING): New macro. * sysdeps/alpha/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING): Likewise. * sysdeps/arm/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING): Likewise. * sysdeps/mips/mips64/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING): Likewise. * sysdeps/mips/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING): Likewise. * sysdeps/powerpc/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING): Likewise. * sysdeps/sh/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING): Likewise. * sysdeps/sparc/sparc32/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING): Likewise. * sysdeps/sparc/sparc64/soft-fp/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING): Likewise. * sysdeps/tile/sfp-machine.h (_FP_TININESS_AFTER_ROUNDING): Likewise.
2014-02-12Update x86_64 libm-test-ulps on AMD family 21h model 1 (bug 16545).Dylan Alex Simon3-17/+70
2014-02-12Relocate alpha from ports to libcRichard Henderson363-6/+18
Also fixed the following whitespace nits to satisfy the push: sysdeps/alpha/alphaev6/memset.S:142: space before tab in indent. sysdeps/alpha/configure:1: new blank line at EOF. sysdeps/alpha/fpu/e_sqrt.c:126: space before tab in indent. sysdeps/alpha/preconfigure:1: new blank line at EOF. sysdeps/unix/sysv/linux/alpha/syscalls.list:1: new blank line at EOF.
2014-02-12NEWS: Add 16447 to fixed bugs list.Andreas Krebbel1-1/+1
2014-02-11Remove _BSD_SOURCE and _SVID_SOURCE.Joseph Myers10-43/+51
This is a minimal patch to remove _BSD_SOURCE and _SVID_SOURCE from the documented user API, making them into aliases for _DEFAULT_SOURCE with a #warning given, but keeping most of the features.h logic using those macros and all the exising __USE_* conditionals, on the basis that all the consequent cleanups will go in followup patches. Tested x86_64. * include/features.h: Update comment documenting feature test macros. [_BSD_SOURCE || _SVID_SOURCE]: Give #warning. Define _DEFAULT_SOURCE. * manual/creature.texi (_BSD_SOURCE): Remove documentation. (_SVID_SOURCE): Likewise. (_DEFAULT_SOURCE): Update description of default features. (Feature Test Macros): Don't mention _SVID_SOURCE in conjunction with _GNU_SOURCE. * manual/filesys.texi (__ftw_func_t): Do not refer to _BSD_SOURCE. (S_ISVTX): Likewise. * manual/math.texi (Mathematical Constants): Likewise. * manual/signal.texi (Interrupted Primitives): Likewise. * manual/startup.texi (putenv): Do not refer to _SVID_SOURCE. * math/test-matherr.c (_SVID_SOURCE): Do not define. * sysvipc/sys/ipc.h [__USE_SVID && !__USE_XOPEN && __GNUC__ >= 2]: Don't refer to _SVID_SOURCE in warning text.
2014-02-11Regenerate x86_64 ulps.Joseph Myers2-0/+5
2014-02-11Merge MIPS dl-lookup.c into generic file.Joseph Myers4-1029/+31
MIPS has its own version of dl-lookup.c to deal with differences between undefined symbol semantics in the PIC and non-PIC ABIs. This is often liable to get out of date with respect to the generic file (for example, the recent __builtin_expect changes didn't cover ports, and it's not obvious to anyone changing dl-lookup.c that there would be architecture-specific versions). This patch adds a macro that dl-machine.h can define that is used in the appropriate place in dl-lookup.c, so that MIPS no longer needs its own version of that file. Tested for mips64 that the only changes to disassembly of installed shared libraries appear to be ld.so changes attributable to different line numbers and paths in assertions. * elf/dl-lookup.c (ELF_MACHINE_SYM_NO_MATCH): Define if not already defined. (do_lookup_x): Use ELF_MACHINE_SYM_NO_MATCH. * sysdeps/mips/dl-lookup.c: Remove. * sysdeps/mips/dl-machine.h (ELF_MACHINE_SYM_NO_MATCH): New macro.
generated by cgit v1.1 at 2024-11-26 21:24:17 +0000