diff options
| -rw-r--r-- | ChangeLog | 32 | ||||
| -rw-r--r-- | manual/argp.texi | 13 | ||||
| -rw-r--r-- | manual/conf.texi | 2 | ||||
| -rw-r--r-- | manual/intro.texi | 6 | ||||
| -rw-r--r-- | manual/sysinfo.texi | 386 | ||||
| -rw-r--r-- | manual/users.texi | 2 | ||||
| -rw-r--r-- | sysdeps/ieee754/ldbl-128/printf_fphex.c | 38 | ||||
| -rw-r--r-- | sysdeps/sparc/sparc64/Makefile | 1 | ||||
| -rw-r--r-- | sysdeps/unix/sysv/linux/sparc/sparc32/Makefile | 3 | ||||
| -rw-r--r-- | sysdeps/unix/sysv/linux/sparc/sparc64/Makefile | 2 |
10 files changed, 445 insertions, 40 deletions
@@ -1,9 +1,39 @@ 2000-04-17 Ulrich Drepper <drepper@redhat.com> + * manual/intro.texi: Change reference from System Information to + System Management. + * manual/users.texi: Likewise. + * manual/conf.texi: Likewise. + * manual/sysinfo.texi: Document mount, umount, and umount2. + Patch by Bryan Henderson <bryanh@giraffe-data.com>. + +2000-04-17 Jakub Jelinek <jakub@redhat.com> + + * sysdeps/ieee754/ldbl-128/printf_fphex.c (PRINT_FPHEX_LONG_DOUBLE): + Create wnumstr as well as numstr to support wide character output + correctly. + +2000-04-15 Jakub Jelinek <jakub@redhat.com> + + * sysdeps/sparc/sparc64/Makefile: Remove sysdep-CFLAGS + modification and move it... + * sysdeps/unix/sysv/linux/sparc/sparc64/Makefile: ...here. + Add -melf64_sparc switch to $(LD) on sparc64-linux. + * sysdeps/unix/sysv/linux/sparc/sparc32/Makefile: Add -melf32_sparc + switch to $(LD) on sparc-linux. + +2000-04-17 Thorsten Kukuk <kukuk@suse.de> + + * sysdeps/unix/sysv/linux/sparc/sparc32/Makefile: Remove setresgid + and setresuid frm sysdep_routines. + +2000-04-17 Ulrich Drepper <drepper@redhat.com> + * manual/Makefile (chapters): Add resource. * manual/time.texi: Move section on resources to... - * manual/resource.texi: ...here. New file. + * manual/resource.texi: ...here. New file. Document ulimit, vlimit, + and vtimes. * manual/setjmp.texi: Adjust back reference. Patch by Bryan Henderson <bryanh@giraffe-data.com>. diff --git a/manual/argp.texi b/manual/argp.texi index 14a9df2..0a5d56d 100644 --- a/manual/argp.texi +++ b/manual/argp.texi @@ -74,10 +74,10 @@ in @var{flags}, calling @code{argp_parse} may result in the program exiting---for instance when an unknown option is encountered. @xref{Program Termination}. -If @var{arg_index} is non-NULL, the index of the first unparsed option +If @var{arg_index} is non-null, the index of the first unparsed option in @var{argv} is returned in it. -The return value is zero for successful parsing, or a unix error code +The return value is zero for successful parsing, or an error code (@pxref{Error Codes}) if an error was detected. Different argp parsers may return arbitrary error codes, but standard ones are @code{ENOMEM} if a memory allocation error occurred, or @code{EINVAL} if an unknown option @@ -556,11 +556,14 @@ combined). Some non-option argument was unrecognized. This occurs when every parser function returns @code{ARGP_KEY_UNKNOWN} -for an argument, in which case parsing stops at that argument. If a -non-NULL value for @var{arg_index} was passed to @code{argp_parse}, the -index of this argument is returned in it, otherwise an error occurs. +for an argument, in which case parsing stops at that argument. If +@var{arg_index} is a null pointer otherwise an error occurs. @end table +In all cases, if a non-null value for @var{arg_index} was passed to +@code{argp_parse}, the index of the first unparsed command-line argument +is passed back in it. + If an error occurs (either detected by argp, or because a parser function returned an error value), then each parser is called with @code{ARGP_KEY_ERROR}, and no further calls are made except the final diff --git a/manual/conf.texi b/manual/conf.texi index a684a5b..9fdaa1c 100644 --- a/manual/conf.texi +++ b/manual/conf.texi @@ -1,4 +1,4 @@ -@node System Configuration, Cryptographic Functions, System Information, Top +@node System Configuration, Cryptographic Functions, System Management, Top @c %MENU% Parameters describing operating system limits @chapter System Configuration Parameters diff --git a/manual/intro.texi b/manual/intro.texi index 2ac893e..b3c1b05 100644 --- a/manual/intro.texi +++ b/manual/intro.texi @@ -698,9 +698,9 @@ implemented so that contributors can design their own services. the system user and group databases. @item -@ref{System Information}, describes functions for getting information -about the hardware and software configuration your program is executing -under. +@ref{System Management}, describes functions for controlling and getting +information about the hardware and software configuration your program +is executing under. @item @ref{System Configuration}, tells you how you can get information about diff --git a/manual/sysinfo.texi b/manual/sysinfo.texi index 5bce9a5..152c24e 100644 --- a/manual/sysinfo.texi +++ b/manual/sysinfo.texi @@ -1,19 +1,25 @@ -@node System Information, System Configuration, Users and Groups, Top -@c %MENU% Getting information about the hardware and operating system -@chapter System Information +@node System Management, System Configuration, Users and Groups, Top +@c %MENU% Controlling the system and getting information about it +@chapter System Management + +This chapter describes facilities for controlling the system that +underlies a process (including the operating system and hardware) and +for getting information about it. Anyone can generally use the +informational facilities, but usually only a properly privileged process +can make changes. -This chapter describes functions that return information about the -particular machine that is in use---the type of hardware, the type of -software, and the individual machine's name. @menu * Host Identification:: Determining the name of the machine. * Hardware/Software Type ID:: Determining the hardware type of the machine and what operating system it is running. -* Filesystem handling:: Which is mounted and/or available? +* Filesystem Handling:: Controlling/querying mounts @end menu +To get information on parameters of the system that are built into the +system, such as the maximum length of a filename, @ref{System +Configuration}. @node Host Identification @section Host Identification @@ -182,15 +188,45 @@ possibility. @end deftypefun -@node Filesystem handling -@section Which filesystems are mounted and/or available? +@node Filesystem Handling +@section Controlling/querying mounts + +All files are in filesystems, and before you can access any file, its +filesystem must be mounted. Because of Unix's concept of +@emph{Everything is a file}, mounting of filesystems is central to doing +almost anything. This section explains how to find out what filesystems +are currently mounted and what filesystems are available for mounting, +and how to change what is mounted. + +The classic filesystem is the contents of a disk drive. The concept is +considerably more abstract, though, and lots of things other than disk +drives can be mounted. + +Some block devices don't correspond to traditional devices like disk +drives. For example, a loop device is a block device whose driver uses +a regular file in another filesystem as its medium. So if that regular +file contains appropriate data for a filesystem, you can by mounting the +loop device essentially mount a regular file. + +Some filesystems aren't based on a device of any kind. The ``proc'' +filesystem, for example, contains files whose data is made up by the +filesystem driver on the fly whenever you ask for it. And when you +write to it, the data you write causes changes in the system. No data +gets stored. + +@c It would be good to mention NFS mounts here. + +@menu +* Mount Information:: What is or could be mounted? +* Mount/Unmount/Remount:: Controlling what is mounted and how +@end menu -The Unix concept of @emph{Everything is a file} is based on the -ability to @dfn{mount} filesystems or other things into the -filesystem. For some programs it is desirable and necessary to access -information about whether a certain filesystem is mounted and, if it is, -where, or simply to get lists of all the available filesystems. The -GNU libc provides some functions to retrieve this information portably. +@node Mount Information, Mount/Unmount/Remount, , Filesystem Handling + +For some programs it is desirable and necessary to access information +about whether a certain filesystem is mounted and, if it is, where, or +simply to get lists of all the available filesystems. The GNU libc +provides some functions to retrieve this information portably. Traditionally Unix systems have a file named @file{/etc/fstab} which describes all possibly mounted filesystems. The @code{mount} program @@ -203,6 +239,13 @@ functions described in this section can do this and they also provide the functionality to convert the external textual representation to the internal representation. +Note that the @file{fstab} and @file{mtab} files are maintained on a +system by @emph{convention}. It is possible for the files not to exist +or not to be consistent with what is really mounted or available to +mount, if the system's administration policy allows it. But programs +that mount and unmount filesystems typically maintain and use these +files as described herein. + @vindex _PATH_FSTAB @vindex _PATH_MNTTAB @vindex FSTAB @@ -215,6 +258,15 @@ defined in @file{fstab.h} and @code{_PATH_MNTTAB}, defined in deprecated and kept only for backward compatibility. The two former names should always be used. +@menu +* fstab:: The @file{fstab} file +* mtab:: The @file{mtab} file +* Other Mount Information:: Other (non-libc) sources of mount information +@end menu + +@node fstab +@subsection The @file{fstab} file + The internal representation for entries of the file is @w{@code{struct fstab}}, defined in @file{fstab.h}. @@ -363,11 +415,12 @@ function is not thread-safe. If an error occurred @code{getfsent} returns a @code{NULL} pointer. @end deftypefun -To access the @file{mtab} file there is a different set of functions and -also a different structure to describe the results. +@node mtab +@subsection The @file{mtab} file +The following functions and data structure access the @file{mtab} file. -@comment fstab.h +@comment mntent.h @comment BSD @deftp {Data Type} {struct mntent} This structure is used with the @code{getmntent}, @code{getmntent_t}, @@ -572,3 +625,300 @@ This function is useful to test whether a specific option is present but when all options have to be processed one is better off with using the @code{getsubopt} function to iterate over all options in the string. @end deftypefun + +@node Other Mount Information +@subsection Other (Non-libc) Sources of Mount Information + +On a system with a Linux kernel and the @code{proc} filesystem, you can +get information on currently mounted filesystems from the file +@file{mounts} in the @code{proc} filesystem. Its format is similar to +that of the @file{mtab} file, but represents what is truly mounted +without relying on facilities outside the kernel to keep @file{mtab} up +to date. + + +@node Mount/Unmount/Remount, , Mount Information, Filesystem Handling + +This section describes the functions for mounting, unmounting, and +remounting filesystems. + +Only the superuser can mount, unmount, or remount a filesystem. + +These functions do not access the @file{fstab} and @file{mtab} files. You +should maintain and use these separately. @xref{Mount Information}. + +The symbols in this section are declared in @file{sys/mount.h}. + +@comment sys/mount.h +@deftypefun {int} mount (const char *@var{special_file}, const char *@var{dir}, const char *@var{fstype}, unsigned long int @var{options}, const void *@var{data}) + +@code{mount} mounts or remounts a filesystem. The two operations are +quite different and are merged rather unnnaturally into this one function. +The @code{MS_REMOUNT} option, explained below, determines whether +@code{mount} mounts or remounts. + +For a mount, the filesystem on the block device represented by the +device special file named @var{special_file} gets mounted over the mount +point @var{dir}. This means that the directory @var{dir} (along with any +files in it) is no longer visible; in its place (and still with the name +@var{dir}) is the root directory of the filesystem on the device. + +As an exception, if the filesystem type (see below) is one which is not +based on a device (e.g. ``proc''), @code{mount} instantiates a +filesystem and mounts it over @var{dir} and ignores @var{special_file}. + +For a remount, @var{dir} specifies the mount point where the filesystem +to be remounted is (and remains) mounted and @var{special_file} is +ignored. Remounting a filesystem means changing the options that control +operations on the filesystem while it is mounted. It does not mean +unmounting and mounting again. + +For a mount, you must identify the type of the filesystem as +@var{fstype}. This type tells the kernel how to access the filesystem +and can be thought of as the name of a filesystem driver. The +acceptable values are system dependent. On a system with a Linux kernel +and the @code{proc} filesystem, the list of possible values is in the +file @file{filesystems} in the @code{proc} filesystem (e.g. type +@kbd{cat /proc/filesystems} to see the list). With a Linux kernel, the +types of filesystems that @code{mount} can mount, and their type names, +depends on what filesystem drivers are configured into the kernel or +loaded as loadable kernel modules. An example of a common value for +@var{fstype} is @code{ext2}. + +For a remount, @code{mount} ignores @var{fstype}. + +@c This is traditionally called "rwflag" for historical reasons. +@c No point in confusing people today, though. +@var{options} specifies a variety of options that apply until the +filesystem in unmounted or remounted. The precise meaning of an option +depends on the filesystem and with some filesystems, an option may have +no effect at all. Furthermore, for some filesystems, some of these +options (but never @code{MS_RDONLY}) can be overridden for individual +file accesses via @code{ioctl}. + +@var{options} is a bit string with bit fields defined using the +following mask and masked value macros: + +@table @code +@item MS_MGC_MASK +This multibit field contains a magic number. If it does not have the value +@code{MS_MGC_VAL}, @code{mount} assumes all the following bits are zero and +the @var{data} argument is a null string, regardless of their actual values. + +@item MS_REMOUNT +This bit on means to remount the filesystem. Off means to mount it. +@c There is a mask MS_RMT_MASK in mount.h that says only two of the options +@c can be reset by remount. But the Linux kernel has it's own version of +@c MS_RMT_MASK that says they all can be reset. As far as I can tell, +@c libc just passes the arguments straight through to the kernel. + +@item MS_RDONLY +This bit on specifies that no writing to the filesystem shall be allowed +while it is mounted. This cannot be overridden by @code{ioctl}. This +option is available on nearly all filesystems. + +@item S_IMMUTABLE +This bit on specifies that no writing to the files in the filesystem +shall be allowed while it is mounted. This can be overridden for a +particular file access by a properly privileged call to @code{ioctl}. +This option is a relatively new invention and is not available on many +filesystems. + +@item S_APPEND +This bit on specifies that the only file writing that shall be allowed +while the filesystem is mounted is appending. Some filesystems allow +this to be overridden for a particular process by a properly privileged +call to @code{ioctl}. This is a relatively new invention and is not +available on many filesystems. + +@item MS_NOSUID +This bit on specifies that Setuid and Setgid permissions on files in the +filesystem shall be ignored while it is mounted. + +@item MS_NOEXEC +This bit on specifies that no files in the filesystem shall be executed +while the filesystem is mounted. + +@item MS_NODEV +This bit on specifies that no device special files in the filesystem +shall be accessible while the filesystem is mounted. + +@item MS_SYNCHRONOUS +This bit on specifies that all writes to the filesystem while it is +mounted shall be synchronous; i.e. data shall be synced before each +write completes rather than held in the buffer cache. + +@item MS_MANDLOCK +This bit on specifies that mandatory locks on files shall be permitted while +the filesystem is mounted. + +@item MS_NOATIME +This bit on specifies that access times of files shall not be updated when +the files are accessed while the filesystem is mounted. + +@item MS_NODIRATIME +This bit on specifies that access times of directories shall not be updated +when the directories are accessed while the filesystem in mounted. + +@c there is also S_QUOTA Linux fs.h (mount.h still uses its former name +@c S_WRITE), but I can't see what it does. Turns on quotas, I guess. + +@end table + +Any bits not covered by the above masks should be set off; otherwise, +results are undefined. + +The meaning of @var{data} depends on the filesystem type and is controlled +entirely by the filesystem driver in the kernel. + +Example: + +@smallexample +@group +#include <sys/mount.h> + +mount("/dev/hdb", "/cdrom", MS_MGC_VAL | MS_RDONLY | MS_NOSUID, ""); + +mount("/dev/hda2", "/mnt", MS_MGC_VAL | MS_REMOUNT, ""); + +@end group +@end smallexample + +Appropriate arguments for @code{mount} are conventionally recorded in +the @file{fstab} table. @xref{Mount Information}. + +The return value is zero if the mount or remount is successful. Otherwise, +it is @code{-1} and @code{errno} is set appropriately. The values of +@code{errno} are filesystem dependent, but here is a general list: + +@table @code +@item EPERM +The process is not superuser. +@item ENODEV +The file system type @var{fstype} is not known to the kernel. +@item ENOTBLK +The file @var{dev} is not a block device special file. +@item EBUSY + +@itemize + +@item +The device is already mounted. + +@item +The mount point is busy. (E.g. it is some process' working directory or +has a filesystem mounted on it already). + +@item +The request is to remount read-only, but there are files open for write. +@end itemize + +@item EINVAL +@itemize + +@item +A remount was attempted, but there is no filesystem mounted over the +specified mount point. + +@item +The supposed filesystem has an invalid superblock. + +@end itemize + +@item EACCESS +@itemize + +@item +The filesystem is inherently read-only (possibly due to a switch on the +device) and the process attempted to mount it read/write (by setting the +@code{MS_RDONLY} bit off). + +@item +@var{special_file} or @var{dir} is not accessible due to file permissions. + +@item +@var{special_file} is not accessible because it is in a filesystem that is +mounted with the @code{MS_NODEV} option. + +@end itemize + +@item EM_FILE +The table of dummy devices is full. @code{mount} needs to create a +dummy device (aka ``unnamed'' device) if the filesystem being mounted is +not one that uses a device. + +@end table + +@end deftypefun + + +@comment sys/mount.h +@deftypefun {int} umount2 (const char *@var{file}, int @var{flags}) + +@code{umount2} unmounts a filesystem. + +You can identify the filesystem to unmount either by the device special +file that contains the filesystem or by the mount point. The effect is +the same. Specify either as the string @var{file}. + +@var{flags} contains the one-bit field identified by the following +mask macro: + +@table @code + +@item MNT_FORCE +This bit on means to force the unmounting even if the filesystem is +busy, by making it unbusy first. If the bit is off and the filesystem is +busy, @code{umount2} fails with @code{errno} = @code{EBUSY}. Depending +on the filesystem, this may override all, some, or no busy conditions. + +@end table + +All other bits in @var{flags} should be set to zero; otherwise, the result +is undefined. + +Example: + +@smallexample +@group +#include <sys/mount.h> + +umount2("/mnt", MNT_FORCE); + +umount2("/dev/hdd1", 0); + +@end group +@end smallexample + +After the filesystem is unmounted, the directory that was the mount point +is visible, as are any files in it. + +As part of unmounting, @code{umount2} syncs the filesystem. + +If the unmounting is successful, the return value is zero. Otherwise, it +is @code{-1} and @code{errno} is set accordingly: + +@table @code +@item EPERM +The process is not superuser. +@item EBUSY +The filesystem cannot be unmounted because it is busy. E.g. it contains +a directory that is some process's working directory or a file that some +process has open. With some filesystems in some cases, you can avoid +this failure with the @code{MNT_FORCE} option. + +@item EINVAL +@var{file} validly refers to a file, but that file is neither a mount +point nor a device special file of a currently mounted filesystem. + +@end table +@end deftypefun + +@comment sys/mount.h +@deftypefun {int} umount (const char *@var{file}) + +@code{umount} does the same thing as @code{umount2} with @var{flags} +set to zeroes. It exists for compatibility. + + +@end deftypefun diff --git a/manual/users.texi b/manual/users.texi index 64bf153..d13139c 100644 --- a/manual/users.texi +++ b/manual/users.texi @@ -1,4 +1,4 @@ -@node Users and Groups, System Information, Name Service Switch, Top +@node Users and Groups, System Management, Name Service Switch, Top @c %MENU% How users are identified and classified @chapter Users and Groups diff --git a/sysdeps/ieee754/ldbl-128/printf_fphex.c b/sysdeps/ieee754/ldbl-128/printf_fphex.c index a6ca7a8..5f20dba 100644 --- a/sysdeps/ieee754/ldbl-128/printf_fphex.c +++ b/sysdeps/ieee754/ldbl-128/printf_fphex.c @@ -1,6 +1,6 @@ /* Print floating point number in hexadecimal notation according to ISO C99. - Copyright (C) 1997, 1998, 1999 Free Software Foundation, Inc. + Copyright (C) 1997, 1998, 1999, 2000 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or @@ -36,23 +36,43 @@ do { \ zero_mantissa = (num0|num1) == 0; \ \ if (sizeof (unsigned long int) > 6) \ - numstr = _itoa_word (num1, numbuf + sizeof numbuf, 16, \ - info->spec == 'A'); \ + { \ + numstr = _itoa_word (num1, numbuf + sizeof numbuf, 16, \ + info->spec == 'A'); \ + wnumstr = _itowa_word (num1, wnumbuf + sizeof wnumbuf, 16, \ + info->spec == 'A'); \ + } \ else \ - numstr = _itoa (num1, numbuf + sizeof numbuf, 16, \ - info->spec == 'A'); \ + { \ + numstr = _itoa (num1, numbuf + sizeof numbuf, 16, \ + info->spec == 'A'); \ + wnumstr = _itowa (num1, wnumbuf + sizeof wnumbuf, 16, \ + info->spec == 'A'); \ + } \ \ while (numstr > numbuf + (sizeof numbuf - 64 / 4)) \ - *--numstr = '0'; \ + { \ + *--numstr = '0'; \ + *--wnumstr = L'0'; \ + } \ \ if (sizeof (unsigned long int) > 6) \ - numstr = _itoa_word (num0, numstr, 16, info->spec == 'A'); \ + { \ + numstr = _itoa_word (num0, numstr, 16, info->spec == 'A'); \ + wnumstr = _itowa_word (num0, wnumstr, 16, info->spec == 'A'); \ + } \ else \ - numstr = _itoa (num0, numstr, 16, info->spec == 'A'); \ + { \ + numstr = _itoa (num0, numstr, 16, info->spec == 'A'); \ + wnumstr = _itowa (num0, wnumstr, 16, info->spec == 'A'); \ + } \ \ /* Fill with zeroes. */ \ while (numstr > numbuf + (sizeof numbuf - 112 / 4)) \ - *--numstr = '0'; \ + { \ + *--numstr = '0'; \ + *--wnumstr = L'0'; \ + } \ \ leading = fpnum.ldbl.ieee.exponent == 0 ? '0' : '1'; \ \ diff --git a/sysdeps/sparc/sparc64/Makefile b/sysdeps/sparc/sparc64/Makefile index 96e5273..312e59e 100644 --- a/sysdeps/sparc/sparc64/Makefile +++ b/sysdeps/sparc/sparc64/Makefile @@ -1,3 +1,2 @@ # The Sparc `long double' is a distinct type we support. long-double-fcts = yes -sysdep-CFLAGS += -fcall-used-g7 diff --git a/sysdeps/unix/sysv/linux/sparc/sparc32/Makefile b/sysdeps/unix/sysv/linux/sparc/sparc32/Makefile index 69c0717..6892f58 100644 --- a/sysdeps/unix/sysv/linux/sparc/sparc32/Makefile +++ b/sysdeps/unix/sysv/linux/sparc/sparc32/Makefile @@ -1,8 +1,9 @@ asm-CPPFLAGS = -D__ASSEMBLY__ ASFLAGS-.os += -fPIC +LD += -melf32_sparc ifeq ($(subdir),misc) -sysdep_routines += setfsgid setfsuid setresgid setresuid +sysdep_routines += setfsgid setfsuid endif # When I get this to work, this is the right thing diff --git a/sysdeps/unix/sysv/linux/sparc/sparc64/Makefile b/sysdeps/unix/sysv/linux/sparc/sparc64/Makefile new file mode 100644 index 0000000..8181e42 --- /dev/null +++ b/sysdeps/unix/sysv/linux/sparc/sparc64/Makefile @@ -0,0 +1,2 @@ +sysdep-CFLAGS += -fcall-used-g7 +LD += -melf64_sparc |