nptl: Add rseq registration

The rseq area is placed directly into struct pthread.  rseq
registration failure is not treated as an error, so it is possible
that threads run with inconsistent registration status.

<sys/rseq.h> is not yet installed as a public header.

Co-Authored-By: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>

14 files changed, 935 insertions, 3 deletions

diff --git a/sysdeps/nptl/dl-tls_init_tp.c b/sysdeps/nptl/dl-tls_init_tp.c
index ca494dd..fedb876 100644
--- a/sysdeps/nptl/dl-tls_init_tp.c
+++ b/sysdeps/nptl/dl-tls_init_tp.c
@@ -21,6 +21,7 @@
 #include <list.h>
 #include <pthreadP.h>
 #include <tls.h>
+#include <rseq-internal.h>
 
 #ifndef __ASSUME_SET_ROBUST_LIST
 bool __nptl_set_robust_list_avail;
@@ -57,11 +58,12 @@ __tls_pre_init_tp (void)
 void
 __tls_init_tp (void)
 {
+  struct pthread *pd = THREAD_SELF;
+
   /* Set up thread stack list management.  */
-  list_add (&THREAD_SELF->list, &GL (dl_stack_user));
+  list_add (&pd->list, &GL (dl_stack_user));
 
    /* Early initialization of the TCB.   */
-   struct pthread *pd = THREAD_SELF;
    pd->tid = INTERNAL_SYSCALL_CALL (set_tid_address, &pd->tid);
    THREAD_SETMEM (pd, specific[0], &pd->specific_1stblock[0]);
    THREAD_SETMEM (pd, user_stack, true);
@@ -90,6 +92,8 @@ __tls_init_tp (void)
       }
   }
 
+  rseq_register_current_thread (pd);
+
   /* Set initial thread's stack block from 0 up to __libc_stack_end.
      It will be bigger than it actually is, but for unwind.c/pt-longjmp.c
      purposes this is good enough.  */
diff --git a/sysdeps/unix/sysv/linux/Makefile b/sysdeps/unix/sysv/linux/Makefile
index 29c6c78..eb0f5fc 100644
--- a/sysdeps/unix/sysv/linux/Makefile
+++ b/sysdeps/unix/sysv/linux/Makefile
@@ -131,7 +131,10 @@ ifeq ($(have-GLIBC_2.27)$(build-shared),yesyes)
 tests += tst-ofdlocks-compat
 endif
 
-tests-internal += tst-sigcontext-get_pc
+tests-internal += \
+  tst-rseq \
+  tst-sigcontext-get_pc \
+  # tests-internal
 
 tests-time64 += \
   tst-adjtimex-time64 \
@@ -357,4 +360,8 @@ endif
 
 ifeq ($(subdir),nptl)
 tests += tst-align-clone tst-getpid1
+
+# tst-rseq-nptl is an internal test because it requires a definition of
+# __NR_rseq from the internal system call list.
+tests-internal += tst-rseq-nptl
 endif
diff --git a/sysdeps/unix/sysv/linux/aarch64/bits/rseq.h b/sysdeps/unix/sysv/linux/aarch64/bits/rseq.h
new file mode 100644
index 0000000..9ba9272
--- /dev/null
+++ b/sysdeps/unix/sysv/linux/aarch64/bits/rseq.h
@@ -0,0 +1,43 @@
+/* Restartable Sequences Linux aarch64 architecture header.
+   Copyright (C) 2021 Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+#ifndef _SYS_RSEQ_H
+# error "Never use <bits/rseq.h> directly; include <sys/rseq.h> instead."
+#endif
+
+/* RSEQ_SIG is a signature required before each abort handler code.
+
+   It is a 32-bit value that maps to actual architecture code compiled
+   into applications and libraries.  It needs to be defined for each
+   architecture.  When choosing this value, it needs to be taken into
+   account that generating invalid instructions may have ill effects on
+   tools like objdump, and may also have impact on the CPU speculative
+   execution efficiency in some cases.
+
+   aarch64 -mbig-endian generates mixed endianness code vs data:
+   little-endian code and big-endian data.  Ensure the RSEQ_SIG signature
+   matches code endianness.  */
+
+#define RSEQ_SIG_CODE  0xd428bc00  /* BRK #0x45E0.  */
+
+#ifdef __AARCH64EB__
+# define RSEQ_SIG_DATA 0x00bc28d4  /* BRK #0x45E0.  */
+#else
+# define RSEQ_SIG_DATA RSEQ_SIG_CODE
+#endif
+
+#define RSEQ_SIG       RSEQ_SIG_DATA
diff --git a/sysdeps/unix/sysv/linux/arm/bits/rseq.h b/sysdeps/unix/sysv/linux/arm/bits/rseq.h
new file mode 100644
index 0000000..0542b26
--- /dev/null
+++ b/sysdeps/unix/sysv/linux/arm/bits/rseq.h
@@ -0,0 +1,83 @@
+/* Restartable Sequences Linux arm architecture header.
+   Copyright (C) 2021 Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+#ifndef _SYS_RSEQ_H
+# error "Never use <bits/rseq.h> directly; include <sys/rseq.h> instead."
+#endif
+
+/*
+   RSEQ_SIG is a signature required before each abort handler code.
+
+   It is a 32-bit value that maps to actual architecture code compiled
+   into applications and libraries.  It needs to be defined for each
+   architecture.  When choosing this value, it needs to be taken into
+   account that generating invalid instructions may have ill effects on
+   tools like objdump, and may also have impact on the CPU speculative
+   execution efficiency in some cases.
+
+   - ARM little endian
+
+   RSEQ_SIG uses the udf A32 instruction with an uncommon immediate operand
+   value 0x5de3.  This traps if user-space reaches this instruction by mistake,
+   and the uncommon operand ensures the kernel does not move the instruction
+   pointer to attacker-controlled code on rseq abort.
+
+   The instruction pattern in the A32 instruction set is:
+
+   e7f5def3    udf    #24035    ; 0x5de3
+
+   This translates to the following instruction pattern in the T16 instruction
+   set:
+
+   little endian:
+   def3        udf    #243      ; 0xf3
+   e7f5        b.n    <7f5>
+
+   - ARMv6+ big endian (BE8):
+
+   ARMv6+ -mbig-endian generates mixed endianness code vs data: little-endian
+   code and big-endian data.  The data value of the signature needs to have its
+   byte order reversed to generate the trap instruction:
+
+   Data: 0xf3def5e7
+
+   Translates to this A32 instruction pattern:
+
+   e7f5def3    udf    #24035    ; 0x5de3
+
+   Translates to this T16 instruction pattern:
+
+   def3        udf    #243      ; 0xf3
+   e7f5        b.n    <7f5>
+
+   - Prior to ARMv6 big endian (BE32):
+
+   Prior to ARMv6, -mbig-endian generates big-endian code and data
+   (which match), so the endianness of the data representation of the
+   signature should not be reversed.  However, the choice between BE32
+   and BE8 is done by the linker, so we cannot know whether code and
+   data endianness will be mixed before the linker is invoked.  So rather
+   than try to play tricks with the linker, the rseq signature is simply
+   data (not a trap instruction) prior to ARMv6 on big endian.  This is
+   why the signature is expressed as data (.word) rather than as
+   instruction (.inst) in assembler.  */
+
+#ifdef __ARMEB__
+# define RSEQ_SIG    0xf3def5e7      /* udf    #24035    ; 0x5de3 (ARMv6+) */
+#else
+# define RSEQ_SIG    0xe7f5def3      /* udf    #24035    ; 0x5de3 */
+#endif
diff --git a/sysdeps/unix/sysv/linux/bits/rseq.h b/sysdeps/unix/sysv/linux/bits/rseq.h
new file mode 100644
index 0000000..46cf5d1
--- /dev/null
+++ b/sysdeps/unix/sysv/linux/bits/rseq.h
@@ -0,0 +1,29 @@
+/* Restartable Sequences architecture header.  Stub version.
+   Copyright (C) 2021 Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+#ifndef _SYS_RSEQ_H
+# error "Never use <bits/rseq.h> directly; include <sys/rseq.h> instead."
+#endif
+
+/* RSEQ_SIG is a signature required before each abort handler code.
+
+   It is a 32-bit value that maps to actual architecture code compiled
+   into applications and libraries.  It needs to be defined for each
+   architecture.  When choosing this value, it needs to be taken into
+   account that generating invalid instructions may have ill effects on
+   tools like objdump, and may also have impact on the CPU speculative
+   execution efficiency in some cases.  */
diff --git a/sysdeps/unix/sysv/linux/mips/bits/rseq.h b/sysdeps/unix/sysv/linux/mips/bits/rseq.h
new file mode 100644
index 0000000..a9defee
--- /dev/null
+++ b/sysdeps/unix/sysv/linux/mips/bits/rseq.h
@@ -0,0 +1,62 @@
+/* Restartable Sequences Linux mips architecture header.
+   Copyright (C) 2021 Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+#ifndef _SYS_RSEQ_H
+# error "Never use <bits/rseq.h> directly; include <sys/rseq.h> instead."
+#endif
+
+/* RSEQ_SIG is a signature required before each abort handler code.
+
+   It is a 32-bit value that maps to actual architecture code compiled
+   into applications and libraries.  It needs to be defined for each
+   architecture.  When choosing this value, it needs to be taken into
+   account that generating invalid instructions may have ill effects on
+   tools like objdump, and may also have impact on the CPU speculative
+   execution efficiency in some cases.
+
+   RSEQ_SIG uses the break instruction.  The instruction pattern is:
+
+   On MIPS:
+        0350000d        break     0x350
+
+   On nanoMIPS:
+        00100350        break     0x350
+
+   On microMIPS:
+        0000d407        break     0x350
+
+   For nanoMIPS32 and microMIPS, the instruction stream is encoded as
+   16-bit halfwords, so the signature halfwords need to be swapped
+   accordingly for little-endian.  */
+
+#if defined (__nanomips__)
+# ifdef __MIPSEL__
+#  define RSEQ_SIG      0x03500010
+# else
+#  define RSEQ_SIG      0x00100350
+# endif
+#elif defined (__mips_micromips)
+# ifdef __MIPSEL__
+#  define RSEQ_SIG      0xd4070000
+# else
+#  define RSEQ_SIG      0x0000d407
+# endif
+#elif defined (__mips__)
+# define RSEQ_SIG       0x0350000d
+#else
+/* Unknown MIPS architecture.  */
+#endif
diff --git a/sysdeps/unix/sysv/linux/powerpc/bits/rseq.h b/sysdeps/unix/sysv/linux/powerpc/bits/rseq.h
new file mode 100644
index 0000000..05b3cf7
--- /dev/null
+++ b/sysdeps/unix/sysv/linux/powerpc/bits/rseq.h
@@ -0,0 +1,37 @@
+/* Restartable Sequences Linux powerpc architecture header.
+   Copyright (C) 2021 Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+#ifndef _SYS_RSEQ_H
+# error "Never use <bits/rseq.h> directly; include <sys/rseq.h> instead."
+#endif
+
+/* RSEQ_SIG is a signature required before each abort handler code.
+
+   It is a 32-bit value that maps to actual architecture code compiled
+   into applications and libraries.  It needs to be defined for each
+   architecture.  When choosing this value, it needs to be taken into
+   account that generating invalid instructions may have ill effects on
+   tools like objdump, and may also have impact on the CPU speculative
+   execution efficiency in some cases.
+
+   RSEQ_SIG uses the following trap instruction:
+
+   powerpc-be:    0f e5 00 0b           twui   r5,11
+   powerpc64-le:  0b 00 e5 0f           twui   r5,11
+   powerpc64-be:  0f e5 00 0b           twui   r5,11  */
+
+#define RSEQ_SIG        0x0fe5000b
diff --git a/sysdeps/unix/sysv/linux/rseq-internal.h b/sysdeps/unix/sysv/linux/rseq-internal.h
new file mode 100644
index 0000000..909f547
--- /dev/null
+++ b/sysdeps/unix/sysv/linux/rseq-internal.h
@@ -0,0 +1,45 @@
+/* Restartable Sequences internal API.  Linux implementation.
+   Copyright (C) 2021 Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+#ifndef RSEQ_INTERNAL_H
+#define RSEQ_INTERNAL_H
+
+#include <sysdep.h>
+#include <errno.h>
+#include <kernel-features.h>
+#include <stdio.h>
+#include <sys/rseq.h>
+
+#ifdef RSEQ_SIG
+static inline void
+rseq_register_current_thread (struct pthread *self)
+{
+  int ret = INTERNAL_SYSCALL_CALL (rseq,
+                                   &self->rseq_area, sizeof (self->rseq_area),
+                                   0, RSEQ_SIG);
+  if (INTERNAL_SYSCALL_ERROR_P (ret))
+    THREAD_SETMEM (self, rseq_area.cpu_id, RSEQ_CPU_ID_REGISTRATION_FAILED);
+}
+#else /* RSEQ_SIG */
+static inline void
+rseq_register_current_thread (struct pthread *self)
+{
+  THREAD_SETMEM (self, rseq_area.cpu_id, RSEQ_CPU_ID_REGISTRATION_FAILED);
+}
+#endif /* RSEQ_SIG */
+
+#endif /* rseq-internal.h */
diff --git a/sysdeps/unix/sysv/linux/s390/bits/rseq.h b/sysdeps/unix/sysv/linux/s390/bits/rseq.h
new file mode 100644
index 0000000..3030e38
--- /dev/null
+++ b/sysdeps/unix/sysv/linux/s390/bits/rseq.h
@@ -0,0 +1,37 @@
+/* Restartable Sequences Linux s390 architecture header.
+   Copyright (C) 2021 Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+#ifndef _SYS_RSEQ_H
+# error "Never use <bits/rseq.h> directly; include <sys/rseq.h> instead."
+#endif
+
+/* RSEQ_SIG is a signature required before each abort handler code.
+
+   It is a 32-bit value that maps to actual architecture code compiled
+   into applications and libraries.  It needs to be defined for each
+   architecture.  When choosing this value, it needs to be taken into
+   account that generating invalid instructions may have ill effects on
+   tools like objdump, and may also have impact on the CPU speculative
+   execution efficiency in some cases.
+
+   RSEQ_SIG uses the trap4 instruction.  As Linux does not make use of the
+   access-register mode nor the linkage stack this instruction will always
+   cause a special-operation exception (the trap-enabled bit in the DUCT
+   is and will stay 0).  The instruction pattern is
+       b2 ff 0f ff        trap4   4095(%r0)  */
+
+#define RSEQ_SIG        0xB2FF0FFF
diff --git a/sysdeps/unix/sysv/linux/sys/rseq.h b/sysdeps/unix/sysv/linux/sys/rseq.h
new file mode 100644
index 0000000..c8edff5
--- /dev/null
+++ b/sysdeps/unix/sysv/linux/sys/rseq.h
@@ -0,0 +1,174 @@
+/* Restartable Sequences exported symbols.  Linux header.
+   Copyright (C) 2021 Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+#ifndef _SYS_RSEQ_H
+#define _SYS_RSEQ_H	1
+
+/* Architecture-specific rseq signature.  */
+#include <bits/rseq.h>
+
+#include <stdint.h>
+#include <sys/cdefs.h>
+#include <bits/endian.h>
+
+#ifdef __has_include
+# if __has_include ("linux/rseq.h")
+#  define __GLIBC_HAVE_KERNEL_RSEQ
+# endif
+#else
+# include <linux/version.h>
+# if LINUX_VERSION_CODE >= KERNEL_VERSION (4, 18, 0)
+#  define __GLIBC_HAVE_KERNEL_RSEQ
+# endif
+#endif
+
+#ifdef __GLIBC_HAVE_KERNEL_RSEQ
+/* We use the structures declarations from the kernel headers.  */
+# include <linux/rseq.h>
+#else /* __GLIBC_HAVE_KERNEL_RSEQ */
+/* We use a copy of the include/uapi/linux/rseq.h kernel header.  */
+
+enum rseq_cpu_id_state
+  {
+    RSEQ_CPU_ID_UNINITIALIZED = -1,
+    RSEQ_CPU_ID_REGISTRATION_FAILED = -2,
+  };
+
+enum rseq_flags
+  {
+    RSEQ_FLAG_UNREGISTER = (1 << 0),
+  };
+
+enum rseq_cs_flags_bit
+  {
+    RSEQ_CS_FLAG_NO_RESTART_ON_PREEMPT_BIT = 0,
+    RSEQ_CS_FLAG_NO_RESTART_ON_SIGNAL_BIT = 1,
+    RSEQ_CS_FLAG_NO_RESTART_ON_MIGRATE_BIT = 2,
+  };
+
+enum rseq_cs_flags
+  {
+    RSEQ_CS_FLAG_NO_RESTART_ON_PREEMPT =
+      (1U << RSEQ_CS_FLAG_NO_RESTART_ON_PREEMPT_BIT),
+    RSEQ_CS_FLAG_NO_RESTART_ON_SIGNAL =
+      (1U << RSEQ_CS_FLAG_NO_RESTART_ON_SIGNAL_BIT),
+    RSEQ_CS_FLAG_NO_RESTART_ON_MIGRATE =
+      (1U << RSEQ_CS_FLAG_NO_RESTART_ON_MIGRATE_BIT),
+  };
+
+/* struct rseq_cs is aligned on 32 bytes to ensure it is always
+   contained within a single cache-line.  It is usually declared as
+   link-time constant data.  */
+struct rseq_cs
+  {
+    /* Version of this structure.  */
+    uint32_t version;
+    /* enum rseq_cs_flags.  */
+    uint32_t flags;
+    uint64_t start_ip;
+    /* Offset from start_ip.  */
+    uint64_t post_commit_offset;
+    uint64_t abort_ip;
+  } __attribute__ ((__aligned__ (32)));
+
+/* struct rseq is aligned on 32 bytes to ensure it is always
+   contained within a single cache-line.
+
+   A single struct rseq per thread is allowed.  */
+struct rseq
+  {
+    /* Restartable sequences cpu_id_start field.  Updated by the
+       kernel.  Read by user-space with single-copy atomicity
+       semantics.  This field should only be read by the thread which
+       registered this data structure.  Aligned on 32-bit.  Always
+       contains a value in the range of possible CPUs, although the
+       value may not be the actual current CPU (e.g. if rseq is not
+       initialized).  This CPU number value should always be compared
+       against the value of the cpu_id field before performing a rseq
+       commit or returning a value read from a data structure indexed
+       using the cpu_id_start value.  */
+    uint32_t cpu_id_start;
+    /* Restartable sequences cpu_id field.  Updated by the kernel.
+       Read by user-space with single-copy atomicity semantics.  This
+       field should only be read by the thread which registered this
+       data structure.  Aligned on 32-bit.  Values
+       RSEQ_CPU_ID_UNINITIALIZED and RSEQ_CPU_ID_REGISTRATION_FAILED
+       have a special semantic: the former means "rseq uninitialized",
+       and latter means "rseq initialization failed".  This value is
+       meant to be read within rseq critical sections and compared
+       with the cpu_id_start value previously read, before performing
+       the commit instruction, or read and compared with the
+       cpu_id_start value before returning a value loaded from a data
+       structure indexed using the cpu_id_start value.  */
+    uint32_t cpu_id;
+    /* Restartable sequences rseq_cs field.
+
+       Contains NULL when no critical section is active for the current
+       thread, or holds a pointer to the currently active struct rseq_cs.
+
+       Updated by user-space, which sets the address of the currently
+       active rseq_cs at the beginning of assembly instruction sequence
+       block, and set to NULL by the kernel when it restarts an assembly
+       instruction sequence block, as well as when the kernel detects that
+       it is preempting or delivering a signal outside of the range
+       targeted by the rseq_cs.  Also needs to be set to NULL by user-space
+       before reclaiming memory that contains the targeted struct rseq_cs.
+
+       Read and set by the kernel.  Set by user-space with single-copy
+       atomicity semantics.  This field should only be updated by the
+       thread which registered this data structure.  Aligned on 64-bit.  */
+    union
+      {
+        uint64_t ptr64;
+# ifdef __LP64__
+        uint64_t ptr;
+# else /* __LP64__ */
+        struct
+          {
+#if __BYTE_ORDER == __BIG_ENDIAN
+            uint32_t padding; /* Initialized to zero.  */
+            uint32_t ptr32;
+#  else /* LITTLE */
+            uint32_t ptr32;
+            uint32_t padding; /* Initialized to zero.  */
+#  endif /* ENDIAN */
+          } ptr;
+# endif /* __LP64__ */
+      } rseq_cs;
+
+    /* Restartable sequences flags field.
+
+       This field should only be updated by the thread which
+       registered this data structure.  Read by the kernel.
+       Mainly used for single-stepping through rseq critical sections
+       with debuggers.
+
+       - RSEQ_CS_FLAG_NO_RESTART_ON_PREEMPT
+           Inhibit instruction sequence block restart on preemption
+           for this thread.
+       - RSEQ_CS_FLAG_NO_RESTART_ON_SIGNAL
+           Inhibit instruction sequence block restart on signal
+           delivery for this thread.
+       - RSEQ_CS_FLAG_NO_RESTART_ON_MIGRATE
+           Inhibit instruction sequence block restart on migration for
+           this thread.  */
+    uint32_t flags;
+  } __attribute__ ((__aligned__ (32)));
+
+#endif /* __GLIBC_HAVE_KERNEL_RSEQ */
+
+#endif /* sys/rseq.h */
diff --git a/sysdeps/unix/sysv/linux/tst-rseq-nptl.c b/sysdeps/unix/sysv/linux/tst-rseq-nptl.c
new file mode 100644
index 0000000..d31d944
--- /dev/null
+++ b/sysdeps/unix/sysv/linux/tst-rseq-nptl.c
@@ -0,0 +1,260 @@
+/* Restartable Sequences NPTL test.
+   Copyright (C) 2021 Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+/* These tests validate that rseq is registered from various execution
+   contexts (main thread, destructor, other threads, other threads created
+   from destructor, forked process (without exec), pthread_atfork handlers,
+   pthread setspecific destructors, signal handlers, atexit handlers).
+
+   See the Linux kernel selftests for extensive rseq stress-tests.  */
+
+#include <stdio.h>
+#include <support/check.h>
+#include <support/xthread.h>
+#include <sys/rseq.h>
+#include <unistd.h>
+
+#ifdef RSEQ_SIG
+# include <array_length.h>
+# include <errno.h>
+# include <error.h>
+# include <pthread.h>
+# include <signal.h>
+# include <stdlib.h>
+# include <string.h>
+# include <support/namespace.h>
+# include <support/xsignal.h>
+# include <syscall.h>
+# include <sys/types.h>
+# include <sys/wait.h>
+# include "tst-rseq.h"
+
+static pthread_key_t rseq_test_key;
+
+static void
+atfork_prepare (void)
+{
+  if (!rseq_thread_registered ())
+    {
+      printf ("error: rseq not registered in pthread atfork prepare\n");
+      support_record_failure ();
+    }
+}
+
+static void
+atfork_parent (void)
+{
+  if (!rseq_thread_registered ())
+    {
+      printf ("error: rseq not registered in pthread atfork parent\n");
+      support_record_failure ();
+    }
+}
+
+static void
+atfork_child (void)
+{
+  if (!rseq_thread_registered ())
+    {
+      printf ("error: rseq not registered in pthread atfork child\n");
+      support_record_failure ();
+    }
+}
+
+static void
+rseq_key_destructor (void *arg)
+{
+  /* Cannot use deferred failure reporting after main returns.  */
+  if (!rseq_thread_registered ())
+    FAIL_EXIT1 ("rseq not registered in pthread key destructor");
+}
+
+static void
+atexit_handler (void)
+{
+  /* Cannot use deferred failure reporting after main returns.  */
+  if (!rseq_thread_registered ())
+    FAIL_EXIT1 ("rseq not registered in atexit handler");
+}
+
+/* Used to avoid -Werror=stringop-overread warning with
+   pthread_setspecific and GCC 11.  */
+static char one = 1;
+
+static void
+do_rseq_main_test (void)
+{
+  TEST_COMPARE (atexit (atexit_handler), 0);
+  rseq_test_key = xpthread_key_create (rseq_key_destructor);
+  TEST_COMPARE (pthread_atfork (atfork_prepare, atfork_parent, atfork_child), 0);
+  xraise (SIGUSR1);
+  TEST_COMPARE (pthread_setspecific (rseq_test_key, &one), 0);
+  TEST_VERIFY_EXIT (rseq_thread_registered ());
+}
+
+static void
+cancel_routine (void *arg)
+{
+  if (!rseq_thread_registered ())
+    {
+      printf ("error: rseq not registered in cancel routine\n");
+      support_record_failure ();
+    }
+}
+
+static pthread_barrier_t cancel_thread_barrier;
+static pthread_cond_t cancel_thread_cond = PTHREAD_COND_INITIALIZER;
+static pthread_mutex_t cancel_thread_mutex = PTHREAD_MUTEX_INITIALIZER;
+
+static void
+test_cancel_thread (void)
+{
+  pthread_cleanup_push (cancel_routine, NULL);
+  (void) xpthread_barrier_wait (&cancel_thread_barrier);
+  /* Wait forever until cancellation.  */
+  xpthread_cond_wait (&cancel_thread_cond, &cancel_thread_mutex);
+  pthread_cleanup_pop (0);
+}
+
+static void *
+thread_function (void * arg)
+{
+  int i = (int) (intptr_t) arg;
+
+  xraise (SIGUSR1);
+  if (i == 0)
+    test_cancel_thread ();
+  TEST_COMPARE (pthread_setspecific (rseq_test_key, &one), 0);
+  return rseq_thread_registered () ? NULL : (void *) 1l;
+}
+
+static void
+sighandler (int sig)
+{
+  if (!rseq_thread_registered ())
+    {
+      printf ("error: rseq not registered in signal handler\n");
+      support_record_failure ();
+    }
+}
+
+static void
+setup_signals (void)
+{
+  struct sigaction sa;
+
+  sigemptyset (&sa.sa_mask);
+  sigaddset (&sa.sa_mask, SIGUSR1);
+  sa.sa_flags = 0;
+  sa.sa_handler = sighandler;
+  xsigaction (SIGUSR1, &sa, NULL);
+}
+
+static int
+do_rseq_threads_test (int nr_threads)
+{
+  pthread_t th[nr_threads];
+  int i;
+  int result = 0;
+
+  xpthread_barrier_init (&cancel_thread_barrier, NULL, 2);
+
+  for (i = 0; i < nr_threads; ++i)
+    th[i] = xpthread_create (NULL, thread_function,
+                             (void *) (intptr_t) i);
+
+  (void) xpthread_barrier_wait (&cancel_thread_barrier);
+
+  xpthread_cancel (th[0]);
+
+  for (i = 0; i < nr_threads; ++i)
+    {
+      void *v;
+
+      v = xpthread_join (th[i]);
+      if (i != 0 && v != NULL)
+        {
+          printf ("error: join %d successful, but child failed\n", i);
+          result = 1;
+        }
+      else if (i == 0 && v == NULL)
+        {
+          printf ("error: join %d successful, child did not fail as expected\n", i);
+          result = 1;
+        }
+    }
+
+  xpthread_barrier_destroy (&cancel_thread_barrier);
+
+  return result;
+}
+
+static void
+subprocess_callback (void *closure)
+{
+  do_rseq_main_test ();
+}
+
+static void
+do_rseq_fork_test (void)
+{
+  support_isolate_in_subprocess (subprocess_callback, NULL);
+}
+
+static int
+do_rseq_test (void)
+{
+  int t[] = { 1, 2, 6, 5, 4, 3, 50 };
+  int i, result = 0;
+
+  if (!rseq_available ())
+    FAIL_UNSUPPORTED ("kernel does not support rseq, skipping test");
+  setup_signals ();
+  xraise (SIGUSR1);
+  do_rseq_main_test ();
+  for (i = 0; i < array_length (t); i++)
+    if (do_rseq_threads_test (t[i]))
+      result = 1;
+  do_rseq_fork_test ();
+  return result;
+}
+
+static void __attribute__ ((destructor))
+do_rseq_destructor_test (void)
+{
+  /* Cannot use deferred failure reporting after main returns.  */
+  if (do_rseq_test ())
+    FAIL_EXIT1 ("rseq not registered within destructor");
+  xpthread_key_delete (rseq_test_key);
+}
+
+#else /* RSEQ_SIG */
+static int
+do_rseq_test (void)
+{
+  FAIL_UNSUPPORTED ("glibc does not define RSEQ_SIG, skipping test");
+  return 0;
+}
+#endif /* RSEQ_SIG */
+
+static int
+do_test (void)
+{
+  return do_rseq_test ();
+}
+
+#include <support/test-driver.c>
diff --git a/sysdeps/unix/sysv/linux/tst-rseq.c b/sysdeps/unix/sysv/linux/tst-rseq.c
new file mode 100644
index 0000000..926376b
--- /dev/null
+++ b/sysdeps/unix/sysv/linux/tst-rseq.c
@@ -0,0 +1,64 @@
+/* Restartable Sequences single-threaded tests.
+   Copyright (C) 2021 Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+/* These tests validate that rseq is registered from main in an executable
+   not linked against libpthread.  */
+
+#include <support/check.h>
+#include <stdio.h>
+#include <sys/rseq.h>
+#include <unistd.h>
+
+#ifdef RSEQ_SIG
+# include <errno.h>
+# include <error.h>
+# include <stdlib.h>
+# include <string.h>
+# include <syscall.h>
+# include "tst-rseq.h"
+
+static void
+do_rseq_main_test (void)
+{
+  TEST_VERIFY_EXIT (rseq_thread_registered ());
+}
+
+static void
+do_rseq_test (void)
+{
+  if (!rseq_available ())
+    {
+      FAIL_UNSUPPORTED ("kernel does not support rseq, skipping test");
+    }
+  do_rseq_main_test ();
+}
+#else /* RSEQ_SIG */
+static void
+do_rseq_test (void)
+{
+  FAIL_UNSUPPORTED ("glibc does not define RSEQ_SIG, skipping test");
+}
+#endif /* RSEQ_SIG */
+
+static int
+do_test (void)
+{
+  do_rseq_test ();
+  return 0;
+}
+
+#include <support/test-driver.c>
diff --git a/sysdeps/unix/sysv/linux/tst-rseq.h b/sysdeps/unix/sysv/linux/tst-rseq.h
new file mode 100644
index 0000000..a476c31
--- /dev/null
+++ b/sysdeps/unix/sysv/linux/tst-rseq.h
@@ -0,0 +1,57 @@
+/* Restartable Sequences tests header.
+   Copyright (C) 2021 Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+#include <errno.h>
+#include <error.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <support/check.h>
+#include <syscall.h>
+#include <sys/rseq.h>
+#include <tls.h>
+
+static inline bool
+rseq_thread_registered (void)
+{
+  return THREAD_GETMEM_VOLATILE (THREAD_SELF, rseq_area.cpu_id) >= 0;
+}
+
+static inline int
+sys_rseq (struct rseq *rseq_abi, uint32_t rseq_len, int flags, uint32_t sig)
+{
+  return syscall (__NR_rseq, rseq_abi, rseq_len, flags, sig);
+}
+
+static inline bool
+rseq_available (void)
+{
+  int rc;
+
+  rc = sys_rseq (NULL, 0, 0, 0);
+  if (rc != -1)
+    FAIL_EXIT1 ("Unexpected rseq return value %d", rc);
+  switch (errno)
+    {
+    case ENOSYS:
+      return false;
+    case EINVAL:
+      /* rseq is implemented, but detected an invalid rseq_len parameter.  */
+      return true;
+    default:
+      FAIL_EXIT1 ("Unexpected rseq error %s", strerror (errno));
+    }
+}
diff --git a/sysdeps/unix/sysv/linux/x86/bits/rseq.h b/sysdeps/unix/sysv/linux/x86/bits/rseq.h
new file mode 100644
index 0000000..9fc909e
--- /dev/null
+++ b/sysdeps/unix/sysv/linux/x86/bits/rseq.h
@@ -0,0 +1,30 @@
+/* Restartable Sequences Linux x86 architecture header.
+   Copyright (C) 2021 Free Software Foundation, Inc.
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Lesser General Public
+   License as published by the Free Software Foundation; either
+   version 2.1 of the License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Lesser General Public License for more details.
+
+   You should have received a copy of the GNU Lesser General Public
+   License along with the GNU C Library; if not, see
+   <https://www.gnu.org/licenses/>.  */
+
+#ifndef _SYS_RSEQ_H
+# error "Never use <bits/rseq.h> directly; include <sys/rseq.h> instead."
+#endif
+
+/* RSEQ_SIG is a signature required before each abort handler code.
+
+   RSEQ_SIG is used with the following reserved undefined instructions, which
+   trap in user-space:
+
+   x86-32:    0f b9 3d 53 30 05 53      ud1    0x53053053,%edi
+   x86-64:    0f b9 3d 53 30 05 53      ud1    0x53053053(%rip),%edi  */
+
+#define RSEQ_SIG        0x53053053