From 6bb11ab3b2e75cc4db2c2f63b0ba903c92313406 Mon Sep 17 00:00:00 2001 From: "H.J. Lu" Date: Tue, 20 Nov 2012 14:41:26 +0000 Subject: Fix sim build when configured with --enable-plugins * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS condition. * common/acinclude.m4: Define lt_cv_dlopen_libs. * arm/configure: Regenerate. * avr/configure: Regenerate. * bfin/configure: Regenerate. * common/configure: Regenerate. * cr16/configure: Regenerate. * cris/configure: Regenerate. * d10v/configure: Regenerate. * erc32/configure: Regenerate. * frv/configure: Regenerate. * h8300/configure: Regenerate. * igen/configure: Regenerate. * iq2000/configure: Regenerate. * lm32/configure: Regenerate. * m32c/configure: Regenerate. * m32r/configure: Regenerate. * m68hc11/configure: Regenerate. * mcore/configure: Regenerate. * microblaze/configure: Regenerate. * mips/configure: Regenerate. * mn10300/configure: Regenerate. * moxie/configure: Regenerate. * ppc/configure: Regenerate. * rl78/configure: Regenerate. * rx/configure: Regenerate. * sh/configure: Regenerate. * sh64/configure: Regenerate. * testsuite/configure: Regenerate. * v850/configure: Regenerate. --- sim/ppc/configure | 1533 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1533 insertions(+) (limited to 'sim/ppc') diff --git a/sim/ppc/configure b/sim/ppc/configure index fd89cb6..50a16c9 100755 --- a/sim/ppc/configure +++ b/sim/ppc/configure @@ -2450,6 +2450,1539 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + + + +# serial 56 LT_INIT + + +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. + + + +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters + + + +# LT_INIT([OPTIONS]) +# ------------------ +# LT_INIT + +# Old names: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. + + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +# _LT_SETUP + + +# _LT_PREPARE_SED_QUOTE_VARS +# -------------------------- +# Define a few sed substitution that help us do robust quoting. + + +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from `configure', and `config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# `config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +# _LT_PROG_LTMAIN + + +## ------------------------------------- ## +## Accumulate code for creating libtool. ## +## ------------------------------------- ## + +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the `libtool' +# label. + + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. + + +# Initialize. + + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. + + +# Initialize. + + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- + + + +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. + + + + +## ------------------------ ## +## FIXME: Eliminate VARNAME ## +## ------------------------ ## + + +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. + + + +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- + + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ + + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- + + + +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- + + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- + + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- + + + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ + + + + +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to `config.status' so that its +# declaration there will have the same value as in `configure'. VARNAME +# must have a single quote delimited value for this to work. + + + +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' + + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script + + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name + + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. + + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- + + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ + + + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into `config.status', and then the shell code to quote escape them in +# for loops in `config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +#_LT_CONFIG_COMMANDS + + +# Initialize. + + +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# `#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' + + + +# C support is built-in for now + + + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +# _LT_LANG + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +# _LT_TAG_COMPILER +# ---------------- +# _LT_TAG_COMPILER + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- + + + +# _LT_DARWIN_LINKER_FEATURES +# -------------------------- +# Checks for linker and compiler features on darwin + + +# _LT_SYS_MODULE_PATH_AIX +# ----------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +# _LT_SYS_MODULE_PATH_AIX + + +# _LT_SHELL_INIT(ARG) +# ------------------- +# _LT_SHELL_INIT + + + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script which will find a shell with a builtin +# printf (which we can use as an echo command). +# _LT_PROG_ECHO_BACKSLASH + + +# _LT_ENABLE_LOCK +# --------------- +# _LT_ENABLE_LOCK + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +# _LT_COMPILER_OPTION + +# Old name: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +# _LT_LINKER_OPTION + +# Old name: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +# LT_CMD_MAX_LEN +#--------------- +# LT_CMD_MAX_LEN + +# Old name: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +# _LT_HEADER_DLFCN +# ---------------- +# _LT_HEADER_DLFCN + + +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +# _LT_TRY_DLOPEN_SELF + + +# LT_SYS_DLOPEN_SELF +# ------------------ +# LT_SYS_DLOPEN_SELF + +# Old name: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +# _LT_COMPILER_C_O + + +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +# _LT_COMPILER_FILE_LOCKS + + +# _LT_CHECK_OBJDIR +# ---------------- +# _LT_CHECK_OBJDIR + + +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +# _LT_LINKER_HARDCODE_LIBPATH + + +# _LT_CMD_STRIPLIB +# ---------------- +# _LT_CMD_STRIPLIB + + +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program which can recognize shared library +# _LT_PATH_TOOL_PREFIX + +# Old name: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +# _LT_PATH_MAGIC +# -------------- +# find a file program which can recognize a shared library +# _LT_PATH_MAGIC + + +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +# LT_PATH_LD + +# Old names: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +# _LT_PATH_LD_GNU +#- -------------- +# _LT_PATH_LD_GNU + + +# _LT_CMD_RELOAD +# -------------- +# find reload flag for linker +# -- PORTME Some linkers may need a different reload flag. +# _LT_CMD_RELOAD + + +# _LT_CHECK_MAGIC_METHOD +# ---------------------- +# how to check for library dependencies +# -- PORTME fill in with the dynamic library characteristics +# _LT_CHECK_MAGIC_METHOD + + +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +# LT_PATH_NM + +# Old names: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +# LT_LIB_M +# -------- +# check for math library +# LT_LIB_M + +# Old name: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +# _LT_COMPILER_NO_RTTI + + +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- + # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +# _LT_COMPILER_PIC + + +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +# _LT_LANG_CXX_CONFIG + + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- + + +# Old name: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +# LT_PROG_RC +# ---------- + + +# Old name: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. + + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. + + + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +# _LT_DECL_SED + +#m4_ifndef + +# Old name: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +# _LT_CHECK_SHELL_FEATURES + + +# _LT_PROG_XSI_SHELLFNS +# --------------------- +# Bourne and XSI compatible variants of some useful shell functions. + + +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. + + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ + + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. + + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. + + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. + + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +# _LT_SET_OPTIONS + + +## --------------------------------- ## +## Macros to handle LT_INIT options. ## +## --------------------------------- ## + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- + + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +# LT_OPTION_DEFINE + + +# dlopen +# ------ + + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +# win32-dll + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the `shared' and +# `disable-shared' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +# _LT_ENABLE_SHARED + + + + +# Old names: + + + + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the `static' and +# `disable-static' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +# _LT_ENABLE_STATIC + + + + +# Old names: + + + + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the `fast-install' +# and `disable-fast-install' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +# _LT_ENABLE_FAST_INSTALL + + + + +# Old names: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# LT_INIT options. +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +# _LT_WITH_PIC + + + + +# Old name: +# This is what autoupdate's m4 run will expand. It fires +# the warning (with _au_warn_XXX), outputs it into the +# updated configure.ac (with AC_DIAGNOSE), and then outputs +# the replacement expansion. + + +# This is an auxiliary macro that is also run when +# autoupdate runs m4. It simply calls m4_warning, but +# we need a wrapper so that each warning is emitted only +# once. We break the quoting in m4_warning's argument in +# order to expand this macro's arguments, not AU_DEFUN's. + + +# Finally, this is the expansion that is picked up by +# autoconf. It tells the user to run autoupdate, and +# then outputs the replacement expansion. We do not care +# about autoupdate's warning because that contains +# information on what to do *after* running autoupdate. + + + +## ----------------- ## +## LTDL_INIT Options ## +## ----------------- ## + + + + + + + + + + +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. + + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. + + + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59 which quotes differently. + + + + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. + + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. + + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. + + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- + + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- + + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- + + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- + + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- + + +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# Generated from ltversion.in. + +# serial 3134 ltversion.m4 +# This file is part of GNU Libtool + + + + + + +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 4 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + ## -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2007 -- cgit v1.1