aboutsummaryrefslogtreecommitdiff
path: root/opcodes/ChangeLog
AgeCommit message (Collapse)AuthorFilesLines
2022-11-22opcodes: Correct address for ARC's "isa_config" aux regShahab Vahedi1-0/+5
This patch changes the address for "isa_config" auxiliary register from 0xC2 to the correct value 0xC1. Moreover, it only exists in arc700+ and not all ARCs. opcodes/ChangeLog: * arc-regs.h: Change isa_config address to 0xc1. isa_config exists for ARC700 and ARCV2 and not ARCALL.
2022-10-31RX assembler: switch arguments of thw MVTACGU insn.Yoshinori Sato1-0/+5
2022-09-22opcodes: SH fix bank register disassemble.Yoshinori Sato1-0/+5
* sh-dis.c (print_insn_sh): Enforce bit7 of LDC Rm,Rn_BANK and STC Rm_BANK,Rn is always 1.
2022-07-21Add ChangeLog entry from previous commitPeter Bergner1-0/+10
2022-07-18opcodes/arc: Implement style support in the disassemblerClaudiu Zissulescu1-0/+10
Update the ARC disassembler to supply style information to the disassembler output. The output formatting remains unchanged. opcodes/ChangeLog: * disassemble.c (disassemble_init_for_target): Set created_styled_output for ARC based targets. * arc-dis.c (find_format_from_table): Use fprintf_styled_ftype instead of fprintf_ftype throughout. (find_format): Likewise. (print_flags): Likewise. (print_insn_arc): Likewise. Signed-off-by: Claudiu Zissulescu <claziss@gmail.com>
2022-07-08Add markers for 2.39 branchNick Clifton1-0/+4
2022-07-04opcodes/avr: Implement style support in the disassemblerMarcus Nilsson1-0/+9
* disassemble.c: (disassemble_init_for_target): Set created_styled_output for AVR based targets. * avr-dis.c: (print_insn_avr): Use fprintf_styled_ftype instead of fprintf_ftype throughout. (avr_operand): Pass in and fill disassembler_style when parsing operands.
2022-04-07IBM zSystems: Add support for z16 as CPU name.Andreas Krebbel1-0/+5
So far z16 was identified as arch14. After the machine has been announced we can now add the real name. gas/ChangeLog: * config/tc-s390.c (s390_parse_cpu): Add z16 as alternate CPU name. * doc/as.texi: Add z16 and arch14 to CPU string list. * doc/c-s390.texi: Add z16 to CPU string list. opcodes/ChangeLog: * s390-mkopc.c (main): Enable z16 as CPU string in the opcode table.
2022-03-16opcodes: handle bfd_amdgcn_arch in configure scriptSimon Marchi1-0/+5
There isn't an actual opcodes implementation for the AMDGCN arch (yet), this is just the bare minimum to get $ ./configure --target=amdgcn-hsa-amdhsa --disable-gas $ make all-binutils working later in this series. opcodes/ChangeLog: * configure.ac: Handle bfd_amdgcn_arch. * configure: Re-generate. Change-Id: Ib7d7c5533a803ed8b2a293e9275f667ed781ce79
2022-03-06MIPS/opcodes: Fix alias annotation for branch instructionsMaciej W. Rozycki1-0/+8
Correct issues with INSN2_ALIAS annotation for branch instructions: - regular MIPS BEQZ/L and BNEZ/L assembly instructions are idioms for BEQ/L and BNE/L respectively with the `rs' operand equal to $0, - microMIPS 32-bit BEQZ and BNEZ assembly instructions are idioms for BEQ and BNE respectively with the `rt' operand equal to $0, - regular MIPS BAL assembly instruction is an idiom for architecture levels of up to the MIPSr5 ISA and a machine instruction on its own from the MIPSr6 ISA up. Add missing annotation to BEQZ/L and BNEZ/L accordingly then and add a new entry for BAL for the MIPSr6 ISA, correcting a disassembly bug: $ mips-linux-gnu-objdump -m mips:isa64r6 -M no-aliases -d bal.o bal.o: file format elf32-tradlittlemips Disassembly of section .text: 00000000 <foo>: 0: 04110000 0x4110000 ... $ Add test cases accordingly. Parts for regular MIPS BEQZ/L and BNEZ/L instructions from Sagar Patel. 2022-03-06 Maciej W. Rozycki <macro@orcam.me.uk> binutils/ * testsuite/binutils-all/mips/mips1-branch-alias.d: New test. * testsuite/binutils-all/mips/mips1-branch-noalias.d: New test. * testsuite/binutils-all/mips/mips2-branch-alias.d: New test. * testsuite/binutils-all/mips/mips2-branch-noalias.d: New test. * testsuite/binutils-all/mips/mips32r6-branch-alias.d: New test. * testsuite/binutils-all/mips/mips32r6-branch-noalias.d: New test. * testsuite/binutils-all/mips/micromips-branch-alias.d: New test. * testsuite/binutils-all/mips/micromips-branch-noalias.d: New test. * testsuite/binutils-all/mips/mips-branch-alias.s: New test source. * testsuite/binutils-all/mips/micromips-branch-alias.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new tests. 2022-03-06 Sagar Patel <sagarmp@cs.unc.edu> Maciej W. Rozycki <macro@orcam.me.uk> opcodes/ * mips-opc.c (mips_builtin_opcodes): Fix INSN2_ALIAS annotation for "bal", "beqz", "beqzl", "bnez" and "bnezl" instructions. * micromips-opc.c (micromips_opcodes): Likewise for "beqz" and "bnez" instructions.
2022-02-17Updated Serbian translations for the bfd, gold, ld and opcodes directoriesNick Clifton1-0/+4
2022-02-14microblaze: fix fsqrt collicion to build on glibc-2.35Sergei Trofimovich1-0/+5
* microblaze-opcm.h: Renamed 'fsqrt' to 'microblaze_fsqrt'. * microblaze-opc.h: Follow 'fsqrt' rename.
2022-01-24Update Bulgarian, French, Romaniam and Ukranian translation for some of the ↵Nick Clifton1-0/+5
sub-directories
2022-01-22Change version number to 2.38.50 and regenerate filesNick Clifton1-0/+5
2022-01-22Add markers for 2.38 branchNick Clifton1-0/+4
2022-01-17Update the config.guess and config.sub files from the master repository and ↵Nick Clifton1-0/+5
regenerate files.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-12-02Allow the --visualize-jumps feature to work with the AVR disassembler.Marcus Nilsson1-0/+5
* avr-dis.c (avr_operand); Pass in disassemble_info and fill in insn_type on branching instructions.
2021-11-26opcodes/riscv: add disassembler options support to libopcodesAndrew Burgess1-0/+9
In preparation for the next commit, which will add GDB support for RISC-V disassembler options, this commit restructures how the disassembler options are managed within libopcodes. The implementation provided here is based on this mailing list patch which was never committed: https://sourceware.org/pipermail/binutils/2021-January/114944.html which in turn took inspiration from the MIPS implementation of the same feature. The biggest changes from the original mailing list post are: 1. The GDB changes have been split into a separate patch, and 2. The `riscv_option_args_privspec` variable, which held the valid priv-spec values is now gone, instead we use the `riscv_priv_specs` array from bfd/cpu-riscv.c instead. Co-authored-by: Simon Cook <simon.cook@embecosm.com> include/ChangeLog: * dis-asm.h (disassembler_options_riscv): Declare. opcodes/ChangeLog: * riscv-dis.c (enum riscv_option_arg_t): New enum typedef. (riscv_options): New static global. (disassembler_options_riscv): New function. (print_riscv_disassembler_options): Rewrite to use disassembler_options_riscv.
2021-11-25Fix building the AArch64 assembler and disassembler when assertions are ↵Nick Clifton1-0/+7
disabled. PR 28614 * aarch64-asm.c: Replace assert(0) with real code. * aarch64-dis.c: Likewise. * aarch64-opc.c: Likewise.
2021-11-25Updated French translation for the opcodes directory.Nick Clifton1-0/+4
* po/fr.po; Updated French translation.
2021-10-27opcodes: Fix RPATH not being set for dynamic libbfd dependencyMaciej W. Rozycki1-0/+8
If built as a shared library, libopcodes has a load-time dependency on libbfd, which is recorded in the dynamic section, however without a corresponding RPATH entry for the directory to find libbfd in. This causes loading to fail whenever libbfd is only pulled by libopcodes indirectly and libbfd has been installed in a directory that is not in the dynamic loader's search path. It does not happen with the programs included with binutils or GDB, because they all also pull libbfd when using libopcodes, but it can happen with external software, e.g.: $ gdbserver --help gdbserver: error while loading shared libraries: libbfd-[...].so: cannot open shared object file: No such file or directory $ (not our `gdbserver'). Indirect dynamic dependencies are handled by libtool automatically by adding RPATH entries as required, however our setup for libopcodes prevents this from happening by linking in libbfd with an explicit file reference sneaked through to the linker directly behind libtool's back via the `-Wl' linker command-line option rather than via `-l' combined with a suitable library search path specified via `-L', as it would be usually the case, or just referring to the relevant .la file in a fully libtool-enabled configuration such as ours. According to an observation in the discussion back in 2007[1][2][3] that has led to the current arrangement it is to prevent libtool from picking up the wrong version of libbfd. It does not appear to be needed though, not at least with our current libtool incarnation, as directly referring `libbfd.la' does exactly what it should, as previously suggested[4], and with no link-time reference to the installation directory other than to set RPATH. Uninstalled version of libopcodes has libbfd's build-time location prepended to RPATH too, as also expected. Use a direct reference to `libbfd.la' then, making the load error quoted above go away. Alternatively `-L' and `-l' could be used to the same effect, but it seems an unnecessary complication and just another way to circumvent rather than making use of libtool. References: [1] "compile failure due to undefined symbol", <https://sourceware.org/ml/binutils/2007-08/msg00476.html> [2] same, <https://sourceware.org/ml/binutils/2007-09/msg00000.html> [3] same, <https://sourceware.org/ml/binutils/2007-10/msg00019.html> [4] same, <https://sourceware.org/ml/binutils/2007-10/msg00034.html> opcodes/ * Makefile.am: Remove obsolete comment. * configure.ac: Refer `libbfd.la' to link shared BFD library except for Cygwin. * Makefile.in: Regenerate. * configure: Regenerate.
2021-09-27configure: regenerate in all projects that use libtool.m4Nick Alcock1-0/+4
(including sim/, which has no changelog.) bfd/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. binutils/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. gas/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. gprof/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. ld/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. libctf/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. * Makefile.in: Regenerate. opcodes/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate. zlib/ChangeLog 2021-09-27 Nick Alcock <nick.alcock@oracle.com> * configure: Regenerate.
2021-09-25PowerPC: Enable mfppr mfppr32, mtppr and mtppr32 extended mnemonics on POWER5Peter Bergner1-0/+5
SPR 896 and the mfppr mfppr32, mtppr and mtppr32 extended mnemonics were added in ISA 2.03, so enable them on POWER5 and later. opcodes/ * ppc-opc.c (powerpc_opcodes) <mfppr, mfppr32, mtppr, mtppr32>: Enable on POWER5 and later. gas/ * testsuite/gas/ppc/power5.s: New test. * testsuite/gas/ppc/power5.d: Likewise. * testsuite/gas/ppc/ppc.exp: Run it. * testsuite/gas/ppc/power7.s: Remove tests for mfppr, mfppr32, mtppr and mtppr32. * testsuite/gas/ppc/power7.d: Likewise.
2021-09-20riscv: print .2byte or .4byte before an unknown instruction encodingAndrew Burgess1-0/+6
When the RISC-V disassembler encounters an unknown instruction, it currently just prints the value of the bytes, like this: Dump of assembler code for function custom_insn: 0x00010132 <+0>: addi sp,sp,-16 0x00010134 <+2>: sw s0,12(sp) 0x00010136 <+4>: addi s0,sp,16 0x00010138 <+6>: 0x52018b 0x0001013c <+10>: 0x9c45 My proposal, in this patch, is to change the behaviour to this: Dump of assembler code for function custom_insn: 0x00010132 <+0>: addi sp,sp,-16 0x00010134 <+2>: sw s0,12(sp) 0x00010136 <+4>: addi s0,sp,16 0x00010138 <+6>: .4byte 0x52018b 0x0001013c <+10>: .2byte 0x9c45 Adding the .4byte and .2byte opcodes. The benefit that I see here is that in the patched version of the tools, the disassembler output can be fed back into the assembler and it should assemble to the same binary format. Before the patch, the disassembler output is invalid assembly. I've started a RISC-V specific test file under binutils so that I can add a test for this change. binutils/ChangeLog: * testsuite/binutils-all/riscv/riscv.exp: New file. * testsuite/binutils-all/riscv/unknown.d: New file. * testsuite/binutils-all/riscv/unknown.s: New file. opcodes/ChangeLog: * riscv-dis.c (riscv_disassemble_insn): Print a .%dbyte opcode before an unknown instruction, '%d' is replaced with the instruction length.
2021-09-02Fix the V850 assembler's generation of relocations for the st.b instruction.Nick Clifton1-0/+6
PR 28292 gas * config/tc-v850.c (handle_lo16): Also accept BFD_RELOC_V850_LO16_SPLIT_OFFSET. * testsuite/gas/v850/split-lo16.s: Add extra line. * testsuite/gas/v850/split-lo16.d: Update expected disassembly. opcodes * v850-opc.c (D16): Use BFD_RELOC_V850_LO16_SPLIT_OFFSET in place of BFD_RELOC_16.
2021-08-17opcodes: Fix the auxiliary register numbers for ARC HSShahab Vahedi1-0/+4
The numbers for the auxiliary registers "tlbindex" and "tlbcommand" of ARCv2HS are incorrect. This patch makes the following changes to correct that error. ,------------.-----------------.---------------. | aux. reg. | old (incorrect) | new (correct) | |------------+-----------------+---------------| | tlbindex | 0x463 | 0x464 | | tlbcommand | 0x464 | 0x465 | `------------^-----------------^---------------' opcodes/ 2021-08-17 Shahab Vahedi <shahab@synopsys.com> * arc-regs.h (DEF): Fix the register numbers.
2021-08-10Updated Serbian and Russian translations for various sub-directoriesNick Clifton1-0/+4
2021-07-27Correct gs264e bfd_mach in mips_arch_choices.Chenghua Xu1-0/+4
opcodes/ * mips-dis.c (mips_arch_choices): Correct gs264e bfd_mach.
2021-07-07Add changelog entries for last commitAndreas Krebbel1-0/+4
2021-07-03Update version number and regenerate filesNick Clifton1-0/+5
2021-07-03Add markers for 2.37 branchNick Clifton1-0/+4
2021-07-02Re: Fix minor NDS32 renaming snafuAlan Modra1-0/+9
Some extern declarations differ in constnes to their definitions too. Let's make sure this sort of thing doesn't happen again, but putting the externs in a header where they belong. gas/ * config/tc-nds32.c (nds32_keyword_gpr): Don't declare. (md_begin): Constify k. opcodes/ * nds32-dis.c (nds32_find_reg_keyword): Constify arg and return. (nds32_parse_audio_ext, nds32_parse_opcode): Constify psys_reg. (nds32_field_table, nds32_opcode_table, nds32_keyword_table), (nds32_opcodes, nds32_operand_fields, nds32_keywords), (nds32_keyword_gpr): Move declarations to.. * nds32-asm.h: ..here, constifying to match definitions.
2021-07-01cgen: split GUILE setting outMike Frysinger1-0/+6
This makes it easier to override to point to an older version of guile. The current cgen code doesn't work with guile-2, so need to point to an older guile-1.8.
2021-07-01opcodes: constify & local meps macrosMike Frysinger1-0/+7
Avoid exporting this common variable name into writable data.
2021-07-01opcodes: cleanup nds32 variablesMike Frysinger1-0/+17
For the variables that don't need to be exported, mark them static. For the ones shared between modules, add a "nds32_" prefix to avoid collisions with these common variable names.
2021-07-01opcodes: constify & localize z80 opcodesMike Frysinger1-0/+5
These aren't used outside of this module, and are never modified. Mark it static to avoid bad exported variable name issues.
2021-07-01opcodes: constify & scope microblaze opcodesMike Frysinger1-0/+12
This is exporting the variable "opcodes" as a large writable blob. This is not a namespace friendly name, so add a "microblaze" prefix, and then sprinkle const over its definition & use.
2021-07-01opcodes: constify aarch64_opcode_tablesMike Frysinger1-1/+6
This table is huge (~350k), so stop putting it into writable .data since it's only const data.
2021-06-22opcodes: make use of __builtin_popcount when availableAndrew Burgess1-0/+5
This commit provides a small performance improvement when starting up CGEN based disassemblers by making use of __builtin_popcount. The #if check used in this commit was copied from bfd/elf32-arm.c where __builtin_popcount is also used. I ran into this code while investigating some GDB tests that would occasionally timeout. One of the reason these tests were having problems is that the m16c and m32c disassemblers take so long to initialise themselves. Speeding up count_decodable_bits helps, but is not a total solution. Still, this felt like an easy win which added minimal extra complexity, so I figure its worth doing. opcodes/ChangeLog: * cgen-dis.c (count_decodable_bits): Use __builtin_popcount when available.
2021-06-22picojava assembler and disassembler fixesAlan Modra1-0/+5
Commit 54758c3e398d made changes to the picojava support based on https://sourceware.org/pipermail/binutils/2005-November/045136.html An update from picojava to picojava II, I think. Unfortunately the patch neglected any changes to the gas testsuite, resulting in "FAIL: pj" since that date. This patch makes a few relatively simple changes to cure the regression. gas/ * config/tc-pj.c (md_apply_fix): Apply PJ_CODE_REL32 relocs. * testsuite/gas/pj/ops.s: Update jsr, ret, getstatic, putstatic, getfield, putfield, invokevirtual, invokespecial, invokestatic, invokeinterface, goto_w, jsr_w assembly. Delete version 1 picojava opcodes. * testsuite/gas/pj/ops.d: Match expected output. opcodes/ * pj-dis.c (print_insn_pj): Don't print trailing tab. Do print separator for pcrel insns.
2021-06-19ubsan: vax: pointer overflowAlan Modra1-0/+4
"VAX export class call relocation test" fails with ubsan on a 32-bit host. * vax-dis.c (print_insn_vax): Avoid pointer overflow.
2021-06-19Fix another strncpy warningAlan Modra1-0/+5
* tic30-dis.c (get_register_operand): Don't ask strncpy to fill entire buffer.
2021-06-17powerpc: move cell "or rx,rx,rx" hintsAlan Modra1-0/+5
* ppc-opc.c (powerpc_opcodes): Move cell db*cyc to proper location in table.
2021-06-03PR1202, mcore disassembler: wrong address looptAlan Modra1-0/+6
Fixes a 16 year old bug report, which even came with a patch. opcodes/ PR 1202 * mcore-dis.c (print_insn_mcore): Correct loopt disassembly. Use unsigned int for inst. gas/ PR 1202 * testsuite/gas/mcore/allinsn.d: Correct loopt expected output.
2021-06-02arc: Construct disassembler options dynamicallyShahab Vahedi1-0/+8
The idea of this change is simple: Populate a data structure, namely "disasm_option_and_arg_t" from "include/dis-asm.h", to encompass the disassembly options and their possible arguments. This will make it easier to manage or extend those options by adapting entries in a data structure, "arc_options". There will be lesser need to hard-code the options in the code itself. Moreover, ARC GDB will use this population function, "disassembler_options_arc ()", to enable the "set disassembler-option" for ARC targets. The gdb change will be in a separate patch though. The changes in this patch can be divided into: 1) Introduction of "disassembler_options_arc ()" that will return a "disasm_option_and_arg_t" structure representing the disassembly options and their likely arguments. 2) New data type "arc_options_arg_t" and new data "arc_options". These are the internals for keeping track of options and arguments entries that can easily be extended. 3) To print the options, the "print_arc_disassembler_options ()" has been adjusted to use this dynamically built structure instead of having them hard-coded inside. To see this in effect, one can look into the output of: $ ./binutils/objdump --help ... The following ARC specific disassembler options are... ... include/ChangeLog: * dis-asm.h (disassembler_options_arc): New prototype. opcodes/ChangeLog: * arc-dis.c (arc_option_arg_t): New enumeration. (arc_options): New variable. (disassembler_options_arc): New function. (print_arc_disassembler_options): Reimplement in terms of "disassembler_options_arc".
2021-05-29PowerPC table driven -Mraw disassemblyAlan Modra1-0/+15
opcodes/ * ppc-dis.c (lookup_powerpc): Test deprecated field when -Many. Don't special case PPC_OPCODE_RAW. (lookup_prefix): Likewise. (lookup_vle, lookup_spe2): Similarly. Add dialect parameter and.. (print_insn_powerpc): ..update caller. * ppc-opc.c (EXT): Define. (powerpc_opcodes): Mark extended mnemonics with EXT. (prefix_opcodes, vle_opcodes): Likewise. (XISEL, XISEL_MASK): Add cr field and simplify. (powerpc_opcodes): Use XISEL with extended isel mnemonics and sort all isel variants to where the base mnemonic belongs. Sort dstt, dststt and dssall. gas/ * testsuite/gas/ppc/raw.s, * testsuite/gas/ppc/raw.d: New test. * testsuite/gas/ppc/ppc.exp: Run it.
2021-05-29MIPS/opcodes: Reorder legacy COP0, COP2, COP3 opcode instructionsMaciej W. Rozycki1-0/+5
Group legacy instructions using the COP0, COP2, COP3 opcodes together and by their coprocessor number, and move them towards the end of the opcode table. No functional change. With the addition of explicit ISA exclusions this is maybe not strictly necessary anymore as the individual legacy instructions are not supposed to match ISA levels or CPU implementations that have discarded them or replaced with a new instruction each, but let's not have them scattered randomly across blocks of unrelated instruction sets where someone chose to put them previously. Perhaps they could be put back in alphabetical order in the main instruction block, but let's leave it for another occasion. opcodes/ * mips-opc.c (mips_builtin_opcodes): Reorder legacy COP0, COP2, COP3 opcode instructions.
2021-05-29MIPS/opcodes: Accurately record coprocessor opcode CPU/ISA membershipMaciej W. Rozycki1-0/+10
Adjust opcode table entries for coprocessor instructions that have been removed from certain ISA levels or CPU implementations as follows: - remove CP0 memory access instructions from MIPS II up as the LWC0 and SWC0 opcodes have been reused for the LL and SC instructions respectively[1]; strictly speaking LWC0 and SWC0 have never really been defined in the first place[2], but let's keep them for now in case an odd implementation did, - remove CP0 branch instructions from MIPS IV[3] and MIPS32[4] up, as they have been removed as from those ISAs, - remove CP0 control register move instructions from MIPS32 up, as they have been removed as from that ISA[5], - remove the RFE instruction from MIPS III[6] and MIPS32[7] up, as it has been removed as from those ISAs in favour to ERET, - remove CP2 instructions from Vr5400 CPUs as their encodings have been reused for the multimedia instruction set extensions[8] and no CP2 registers exist[9], - remove CP3 memory access instructions from MIPS III up as coprocessor 3 has been removed as from that ISA[10][11] and from MIPS32 up as the LWC3 opcode has been reused for the PREF instruction and consequently all the four memory access instructions removed from the ISA (though the COP3 opcode has been retained)[12]. Update the testsuite accordingly. References: [1] Charles Price, "MIPS IV Instruction Set", MIPS Technologies, Inc., Revision 3.2, September, 1995, Table A-38 "CPU Instruction Encoding - MIPS II Architecture", p. A-178 [2] same, Section A.2.5.1 "Coprocessor Load and Store", p. A-12 [3] "MIPS R10000 Microprocessor User's Manual", Version 2.0, MIPS Technologies, Inc., January 29, 1997, Section 14.25 "CP0 Instructions", Subsection "Branch on Coprocessor 0", p. 285 [4] "MIPS32 Architecture For Programmers, Volume II: The MIPS32 Instruction Set", MIPS Technologies, Inc., Document Number: MD00086, Revision 1.00, June 9, 2003, Table A-9 "MIPS32 COP0 Encoding of rs Field", p. 242 [5] same [6] Joe Heinrich, "MIPS R4000 Microprocessor User's Manual", Second Edition, MIPS Technologies, Inc., April 1, 1994, Figure A-2 "R4000 Opcode Bit Encoding", p. A-182 [8] "Vr5432 64-bit MIPS RISC Microprocessor User's Manual, Volume 1", NEC Electronics Inc., Document No. U13751EU5V0UM00, May 2000, Section 1.2.3 "CPU Instruction Set Overview", p. 9 [9] "Vr5432 64-bit MIPS RISC Microprocessor User's Manual, Volume 2", NEC Electronics Inc., Document No. U13751EU5V0UM00, May 2000, Section 19.2 "Multimedia Instruction Format", p. 681 [10] Charles Price, "MIPS IV Instruction Set", MIPS Technologies, Inc., Revision 3.2, September, 1995, Section A 8.3.4 "Coprocessor 3 - COP3 and CP3 load/store", p. A-176 [11] same, Table A-39 "CPU Instruction Encoding - MIPS III Architecture", p. A-179 [12] "MIPS32 Architecture For Programmers, Volume II: The MIPS32 Instruction Set", MIPS Technologies, Inc., Document Number: MD00086, Revision 1.00, August 29, 2002, Table A-2 "MIPS32 Encoding of the Opcode Field", p. 241 opcodes/ * mips-opc.c (mips_builtin_opcodes): Update exclusion list for "ldc2", "ldc3", "lwc0", "lwc2", "lwc3", "sdc2", "sdc3", "swc0", "swc2", "swc3", "cfc0", "ctc0", "bc2f", "bc2fl", "bc2t", "bc2tl", "cfc2", "ctc2", "dmfc2", "dmtc2", "mfc2", "mtc2", "bc3f", "bc3fl", "bc3t", "bc3tl", "cfc3", "ctc3", "mfc3", "mtc3", "bc0f", "bc0fl", "bc0t", "bc0tl", "rfe", "c2", "c3", "cop2", and "cop3" entries. gas/ * testsuite/gas/mips/mips32@isa-override-1.d: Update for LDC3 instruction removal. * testsuite/gas/mips/mips32r2@isa-override-1.d: Likewise.
2021-05-29MIPS/opcodes: Remove DMFC3 and DMTC3 instructionsMaciej W. Rozycki1-0/+5
Coprocessor 3 has been removed from the MIPS ISA as from MIPS III[1][2] with the LDC3 and SDC3 instructions having been replaced with LD and SD instructions respectively and therefore the doubleword move instructions from and to that coprocessor have never materialized (for 32-bit ISAs coprocessor 3 has likewise been removed as from MIPS32r2[3]). Remove the DMFC3 and DMTC3 instructions from the opcode table then to avoid confusion. References: [1] Charles Price, "MIPS IV Instruction Set", MIPS Technologies, Inc., Revision 3.2, September, 1995, Section A 8.3.4 "Coprocessor 3 - COP3 and CP3 load/store", p. A-176 [2] same, Table A-39 "CPU Instruction Encoding - MIPS III Architecture", p. A-179 [3] "MIPS32 Architecture For Programmers, Volume II: The MIPS32 Instruction Set", MIPS Technologies, Inc., Document Number: MD00086, Revision 2.00, June 9, 2003, Table A-2 "MIPS32 Encoding of the Opcode Field", p. 317 opcodes/ * mips-opc.c (mips_builtin_opcodes): Remove "dmfc3" and "dmtc3" entries and associated comments.
generated by cgit v1.1 at 2024-09-08 08:17:55 +0000