| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Problems:
gdb/compile/compile.c
gdb/cp-support.c
gdb/cp-support.h
gdb/gdbtypes.h
gdb/language.c
gdb/linespec.c
|
|
gdb/ChangeLog:
* MAINTAINERS (Write After Approval): Add Stafford Horne.
|
|
I noticed this while looking at the reggroup intializations. It seems
for xtensa the "cpN" reggroup->name is getting assigned to the same text
pointer for each iteration of XTENSA_MAX_COPROCESSOR.
Note, internally reggroup_new() does not do any xstrdup().
gdb/ChangeLog:
2017-08-15 Stafford Horne <shorne@gmail.com>
* xtensa-tdep.c (xtensa_init_reggroups): Use xstrdup for cpname.
|
|
When I made commit 9a6c7d9c021cfeb290d76584db7a01e57e7c3d4e, which
C++-fied gdb/common/environ.[ch], I mistakenly altered the behaviour
of the 'unset environment' command. This command, which should delete
all environment variables, is now resetting the list of variables to
the state they were when GDB was started.
This commit fixes this regression, and also adds a test on
gdb.base/environ.exp which really checks if 'unset environment'
worked.
gdb/ChangeLog:
2017-08-15 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21954
* infcmd.c (unset_environment_command): Use the 'clear' method on
the environment instead of resetting it.
gdb/testsuite/ChangeLog:
2017-08-15 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21954
* gdb.base/environ.exp: Add test to check if 'unset environment'
works.
|
|
gdb/ChangeLog:
* fbsd-nat.c (fbsd_convert_siginfo): Fix compile on big-endian
platforms.
|
|
Newer GCC versions yield colored diagnostic messages by default, which may
be useful when executing GDB interactively from a terminal. But when run
from a GDB test case, the compiler output is written into gdb.log, where
such escape sequences are usually more inhibiting than helpful to the
evaluation of test results. So this patch suppresses that.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (universal_compile_options): New caching proc.
(gdb_compile): Suppress GCC's coloring of messages.
|
|
While working on the previous patch, I noticed that BITS_IN_BYTES can be
replaced by HOST_CHAR_BIT, which is used more widely in gdb.
ChangeLog
2017-08-14 Tom Tromey <tom@tromey.com>
* valprint.c (print_octal_chars): Use HOST_CHAR_BIT.
(print_binary_chars): Likewise.
(BITS_IN_BYTES): Remove.
|
|
PR gdb/21675 points out a few regressions in scalar printing.
One type of regression is due to not carrying over the old handling of
floating point printing -- where a format like "/d" causes a floating
point number to first be cast to a signed integer. This patch restores
this behavior.
The other regression is a longstanding bug in print_octal_chars: one of
the constants was wrong. This patch fixes the constant and adds static
asserts to help catch this sort of error.
ChangeLog
2017-08-14 Tom Tromey <tom@tromey.com>
PR gdb/21675
* valprint.c (LOW_ZERO): Change value to 034.
(print_octal_chars): Add static_asserts for octal constants.
* printcmd.c (print_scalar_formatted): Add 'd' case.
testsuite/ChangeLog
2017-08-14 Tom Tromey <tom@tromey.com>
PR gdb/21675:
* gdb.base/printcmds.exp (test_radices): New function.
* gdb.dwarf2/var-access.exp: Use p/u, not p/d.
* gdb.base/sizeof.exp (check_valueof): Use p/d.
* lib/gdb.exp (get_integer_valueof): Use p/d.
|
|
I happened to notice that add_symbol_file_command leaks "sect_opts".
This patch fixes the leak by changing sect_opts to be a std::vector.
I had to change the logic in the loop a little bit. Previously, it
was incrementing section_index after completing an entry; but this
changes it to push a new entry when the name is seen.
I believe the argument parsing here is mildly incorrect, in that
nothing checks whether the -s option actually had any arguments.
Maybe gdb can crash if "-s NAME" is given without an argument. I
didn't try to fix this in this patch, but I do have another patch I
can send later that fixes it up.
Regression tested on the buildbot.
ChangeLog
2017-08-11 Tom Tromey <tom@tromey.com>
* symfile.c (add_symbol_file_command): Use std::vector.
|
|
This patch adds std::move to few spots where it seems to be missing.
Regression tested by the buildbot.
ChangeLog
2017-08-14 Tom Tromey <tom@tromey.com>
* break-catch-throw.c (handle_gnu_v3_exceptions): Use std::move.
* break-catch-syscall.c (create_syscall_event_catchpoint): Use
std::move.
* break-catch-sig.c (create_signal_catchpoint): Use std::move.
|
|
The documentation was erroneously saying that there is a command named
"show set startup-with-shell", while the correct version is "show
startup-with-shell". This commit fixes obvious mistake.
gdb/doc/ChangeLog:
2017-08-12 Sergio Durigan Junior <sergiodj@redhat.com>
PR gdb/21925
* gdb.texinfo (Starting) <startup-with-shell>: Fix typo ("show
set...").
|
|
The get_valueof procedure allows tests to conveniently make gdb evaluate
an expression an return the value as a string. However, it includes an
end-of-line character in its result. I stumbled on this when trying to
use that result as part of a regex further in a test.
You can see this for example by adding a puts in
gdb.dwarf2/implref-struct.exp:get_members:
set members [get_valueof "" ${var} ""]
puts "<$members>"
The output is
<{a = 0, b = 1, c = 2}
>
This is because the regex in get_valueof is too greedy, the captured
portion matches anything up to the gdb_prompt, including the end of line
characters. This patch changes it to capture everything but end of line
characters.
The output of the puts becomes:
<{a = 0, b = 1, c = 2}>
I tested this by running gdb.dwarf2/implref-array.exp and
gdb.dwarf2/implref-struct.exp, the two only current users of that
procedure.
gdb/testsuite/ChangeLog:
* lib/gdb.exp (get_valueof): Don't capture end-of-line
characters.
|
|
- Make skiplist_entry a class with private data members.
- Move all construction logic to the ctor.
- Make skip_file_p etc be methods of skiplist_entry.
- Use std::list for the skip entries chain. Make the list own its
elements.
- Get rid of the ALL_SKIPLIST_ENTRIES/ALL_SKIPLIST_ENTRIES_SAFE
macros, use range-for / iterators instead.
- function_name_is_marked_for_skip 'function_sal' argument must be
non-NULL, so make it a reference instead.
All skiplist_entry invariants are now controlled by skiplist_entry
methods/internals. Some gdb_asserts disappear for being redundant.
gdb/ChangeLog:
2017-08-11 Pedro Alves <palves@redhat.com>
* infrun.c (process_event_stop_test): Adjust
function_name_is_marked_for_skip call.
* skip.c: Include <list>.
(skiplist_entry): Make it a class with private fields, and
getters/setters.
(skiplist_entry_chain): Delete.
(skiplist_entries): New.
(skiplist_entry_count): Delete.
(highest_skiplist_entry_num): New.
(ALL_SKIPLIST_ENTRIES, ALL_SKIPLIST_ENTRIES_SAFE): Delete.
(add_skiplist_entry): Delete.
(skiplist_entry::skiplist_entry): New.
(skiplist_entry::add_entry): New.
(skip_file_command, skip_function): Adjust.
(compile_skip_regexp): Delete.
(skip_command): Don't compile regexp here. Adjust to use
skiplist_entry::add_entry.
(skip_info): Adjust to use range-for and getters.
(skip_enable_command, skip_disable_command): Adjust to use
range-for and setters.
(skip_delete_command): Adjust to use std::list.
(add_skiplist_entry): Delete.
(skip_file_p): Delete, refactored as ...
(skiplist_entry::do_skip_file_p): ... this new method.
(skip_gfile_p): Delete, refactored as ...
(skiplist_entry::do_gskip_file_p): ... this new method.
(skip_function_p, skip_rfunction_p): Delete, refactored as ...
(skiplist_entry::skip_function_p): ... this new method.
(function_name_is_marked_for_skip): Now returns bool, and takes
the function sal by const reference. Adjust to use range-for and
skiplist_entry methods.
(_initialize_step_skip): Remove references to
skiplist_entry_chain, skiplist_entry_count.
* skip.h (function_name_is_marked_for_skip): Now returns bool, and
takes the function sal by const reference.
|
|
It is required that unwinder->sniffer should set *this_cache to NULL if
the unwinder is not applicable or exception is thrown, so
78ac5f831692f70b841044961069e50d4ba6a76f adds clear_pointer_cleanup to set
*this_cache to NULL in case of exception in order to fix PR 14100.
https://sourceware.org/ml/gdb-patches/2012-08/msg00075.html
This patch removes that clear_pointer_cleanup, and catch all exception in
the caller of unwinder->sniffer. In case of exception, reset *this_case.
gdb:
2017-08-11 Yao Qi <yao.qi@linaro.org>
* dwarf2-frame.c (clear_pointer_cleanup): Remove.
(dwarf2_frame_cache): Remove reset_cache_cleanup.
(dwarf2_frame_cache):
* frame-unwind.c (frame_unwind_try_unwinder): Catch
RETURN_MASK_ALL and set *this_case to NULL.
* frame-unwind.h: Update comments.
|
|
This patch adds dwarf2_frame_state_reg_info ctor, dtor, copy ctor,
assignment operator, and move assignment. This patch also adds unit test
to execute_cfa_program to cover the changes.
gdb:
2017-08-11 Yao Qi <yao.qi@linaro.org>
* dwarf2-frame.c (dwarf2_frame_state_alloc_regs): Remove.
(dwarf2_frame_state_copy_regs): Remove.
(dwarf2_frame_state_free_regs): Remove.
(dwarf2_frame_state::~dwarf2_frame_state): Remove.
(dwarf2_restore_rule): Call method .alloc_regs instead of
dwarf2_frame_state_alloc_regs.
(execute_cfa_program): Likewise. Call dwarf2_frame_state_reg_info
constructor. Call std::move.
(dwarf2_fetch_cfa_info): Don't call dwarf2_frame_state_copy_regs.
(dwarf2_frame_cache): Likewise.
[GDB_SELF_TEST]: Include selftest.h and
selftest-arch.h.
[GDB_SELF_TEST] (execute_cfa_program_test): New function.
(_initialize_dwarf2_frame) [GDB_SELF_TEST]: Register
execute_cfa_program_test.
* dwarf2-frame.h (dwarf2_frame_state_reg_info): Add ctor, dtor,
copy ctor, assignment operator, move assignment.
<alloc_regs>: New method.
<swap>: New method.
(struct dwarf2_frame_state): Delete dtor.
(dwarf2_frame_state_alloc_regs): Remove declaration.
* sparc-tdep.c (sparc_execute_dwarf_cfa_vendor_op): Don't call
dwarf2_frame_state_alloc_regs, use .alloc_regs instead.
|
|
This patch adds ctor and dtor to dwarf2_frame_state, so that we can
remove one cleanup "old_chain".
gdb:
2017-08-11 Yao Qi <yao.qi@linaro.org>
* dwarf2-frame.c (dwarf2_frame_state_free): Remove.
(dwarf2_frame_state::dwarf2_frame_state): New.
(dwarf2_frame_state::~dwarf2_frame_state): New.
(dwarf2_fetch_cfa_info): Update.
(dwarf2_frame_cache): Remove old_chain. Change 'fs' to an object
rather than a pointer. Update code.
* dwarf2-frame.h (struct dwarf2_frame_state): Declare ctor and
dtor.
<data_align, code_align, retaddr_column>: Change them to const.
<armcc_cfa_offsets_sf, armcc_cfa_offsets_reversed>: Change them
to bool.
|
|
dwarf2_frame_state_reg.exp_len is only used together with .loc.exp, so
it makes more sense to exp_len to the union as well.
gdb:
2017-08-11 Yao Qi <yao.qi@linaro.org>
* dwarf2-frame.h (struct dwarf2_frame_state_reg) <exp_len>: Remove.
<loc.exp>: New field.
* dwarf2-frame.c (execute_cfa_program): Update.
(dwarf2_frame_prev_register): Update.
|
|
Currently, if you try to use the array version of
gdb::unique_xmalloc_ptr (i.e., std::unique_ptr) in order to have
access to operator[], like:
gdb::unique_xmalloc_ptr<char[]> buf ((char *) xmalloc (10));
return buf[0];
then the build fails, like:
/usr/include/c++/5.3.1/bits/unique_ptr.h: In instantiation of ‘std::unique_ptr<_Tp [], _Dp>::~unique_ptr() [with _Tp = char; _Dp = gdb::xfree_deleter<char []>]’:
main.c:30:61: required from here
/usr/include/c++/5.3.1/bits/unique_ptr.h:484:17: error: no match for call to ‘(std::unique_ptr<char [], gdb::xfree_deleter<char []> >::deleter_type {aka gdb::xfree_deleter<char []>}) (char*&)’
get_deleter()(__ptr);
^
In file included from src/gdb/common/common-defs.h:92:0,
from src/gdb/defs.h:28,
from src/gdb/main.c:20:
src/gdb/common/gdb_unique_ptr.h:34:8: note: candidate: void gdb::xfree_deleter<T>::operator()(T*) const [with T = char []]
void operator() (T *ptr) const { xfree (ptr); }
^
src/gdb/common/gdb_unique_ptr.h:34:8: note: no known conversion for argument 1 from ‘char*’ to ‘char (*)[]’
Makefile:1911: recipe for target 'main.o' failed
make: *** [main.o] Error 1
The problem is that we're missing an xfree_deleter specialization for
arrays.
gdb/ChangeLog:
2017-08-10 Pedro Alves <palves@redhat.com>
* common/gdb_unique_ptr.h (xfree_deleter<T[]>): Define.
|
|
FreeBSD's native target uses linked-lists to keep track of pending fork
events and fake vfork done events. Replace the first list with std::list
and the second with std::forward_list.
gdb/ChangeLog:
* fbsd-nat.c (struct fbsd_fork_info): Remove.
(fbsd_pending_children): Use std::list.
(fbsd_remember_child): Likewise.
(fbsd_is_child_pending): Likewise.
(fbsd_pending_vfork_done): Use std::forward_list.
(fbsd_add_vfork_done): Likewise.
(fbsd_is_vfork_done_pending): Likewise.
(fbsd_next_vfork_done): Likewise.
|
|
- Use a custom deleter with std::unique_ptr to free() memory returned
by kinfo_getvmmap().
- Use std::string with string_printf() to generate the pathname of the
procfs 'map' file.
- Use gdb::byte_vector to manage the dynamic buffer for
TARGET_OBJECT_AUXV and the dynamically allocated array of LWP IDs.
gdb/ChangeLog:
* fbsd-nat.c [HAVE_KINFO_GETVMMAP] (struct free_deleter): New.
(fbsd_find_memory_regions): Use free_deleter with std::unique_ptr.
[!HAVE_KINFO_GETVMMAP] (fbsd_find_memory_regions): Use std::string
for `mapfilename'.
(fbsd_xfer_partial): Use gdb::byte_vector.
(fbsd_add_threads): Likewise.
|
|
gdb/ChangeLog:
* fbsd-nat.c: [!HAVE_KINFO_GETVMMAP]: Include <sys/user.h> and
"filestuff.h".
(fbsd_find_memory_regions): Fix `mapfile' initialization.
|
|
The documentation for the cmd_list field of the Z0 packet refers to its
content as a conditional expression, which seems like a copy-paste error
from the cond_list field.
gdb/doc/ChangeLog:
* gdb.texinfo (Packets): Fix Z0 cmd_list doc referring to
conditional expression.
|
|
I happened to notice that skiplist_entry, in skip.c, contains a
gdb::optional<compiled_regex> -- but that this object's destructor is
never run. This can result in a memory leak.
This patch fixes the bug by applying a bit more C++: changing this
code to use new and delete, and std::unique_ptr; and removing cleanups
in the process.
Built and regression tested on x86-64 Fedora 25.
ChangeLog
2017-08-09 Tom Tromey <tom@tromey.com>
* skip.c (skiplist_entry): New constructor.
(skiplist_entry::enabled, skiplist_entry::function_is_regexp)
(skiplist_entry::file_is_glob): Now bool.
(skiplist_entry::file, skiplist_entry::function): Now
std::string.
(make_skip_entry): Return a unique_ptr. Use new.
(free_skiplist_entry, free_skiplist_entry_cleanup)
(make_free_skiplist_entry_cleanup): Remove.
(skip_command, skip_disable_command, add_skiplist_entry)
(skip_form_bytes, compile_skip_regexp, skip_command, skip_info)
(skip_file_p, skip_gfile_p, skip_function_p, skip_rfunction_p)
(function_name_is_marked_for_skip): Update.
(skip_delete_command): Update. Use delete.
|
|
Recommit with missing header files added.
gdb/
* aarch64-linux-tdep.c: Include "auxv.h" and "elf/common.h".
(aarch64_linux_core_read_description): New function.
(aarch64_linux_init_abi): Register gdbarch_core_read_description.
|
|
This reverts commit b1a6c1cea365f80b90c0bca795c8d16fa0681560.
|
|
Currently, AArch64 only have one target description which is tdesc_aarch64. So,
we haven't implemented any target description detection mechanism for core file.
This patch is an initial implementation of core_read_description method. Future
features can use this to return selected description.
gdb/
* aarch64-linux-tdep.c (aarch64_linux_core_read_description): New
function.
(aarch64_linux_init_abi): Register gdbarch_core_read_description.
|
|
To help avoid issues like the one fixed by e88e8651cf34 ("Fix memory
leak in cp-support.c").
gdb/ChangeLog:
2017-08-09 Pedro Alves <palves@redhat.com>
* cp-name-parser.y (cp_comp_to_string): Return a
gdb::unique_xmalloc_ptr<char>.
* cp-support.c (replace_typedefs_qualified_name)
(replace_typedefs): Adjust to use gdb::unique_xmalloc_ptr<char>.
(cp_canonicalize_string_full): Use op= instead of explicit
convertion.
(cp_class_name_from_physname, method_name_from_physname)
(cp_func_name, cp_remove_params): Adjust to use
gdb::unique_xmalloc_ptr<char>.
* cp-support.h (cp_comp_to_string): Return a
gdb::unique_xmalloc_ptr<char>.
* python/py-type.c (typy_lookup_type): Adjust to use
gdb::unique_xmalloc_ptr<char>.
|
|
Fix:
/export/gnu/import/git/sources/binutils-gdb/gdb/dwarf2read.c: In function ‘const char* dwarf2_string_attr(die_info*, unsigned int, dwarf2_cu*)’:
/export/gnu/import/git/sources/binutils-gdb/gdb/dwarf2read.c:17626:39: error: enum constant in boolean context [-Werror=int-in-bool-context]
|| attr->form == DW_FORM_string || DW_FORM_GNU_str_index
* dwarf2read.c (dwarf2_string_attr): Fix a typo.
|
|
The return value of cp_comp_to_string was never freed, creating a
sizable memory leak detectable with valgrind.
==21225== 8 bytes in 1 blocks are definitely lost in loss record 4,599 of 10,949^M
==21225== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)^M
==21225== by 0x4C2FDEF: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)^M
==21225== by 0x76CB31: d_growable_string_resize (cp-demangle.c:3963)^M
==21225== by 0x76CB31: d_growable_string_init (cp-demangle.c:3942)^M
==21225== by 0x76CB31: cplus_demangle_print (cp-demangle.c:4308)^M
==21225== by 0x4C9535: cp_comp_to_string(demangle_component*, int) (cp-name-parser.y:1972)^M
==21225== by 0x53E1D4: cp_canonicalize_string_full[abi:cxx11](char const*, char const* (*)(type*, void*), void*) (cp-support.c:530)^M
==21225== by 0x53E360: cp_canonicalize_string_no_typedefs[abi:cxx11](char const*) (cp-support.c:548)^M
==21225== by 0x5D51D2: find_linespec_symbols(linespec_state*, VEC_symtab_ptr*, char const*, VEC_symbolp**, VEC_bound_minimal_symbol_d**) (linespec.c:4030)^M
==21225== by 0x5D6CF6: linespec_parse_basic (linespec.c:1907)
==21279== 32 bytes in 1 blocks are definitely lost in loss record 6,066 of 10,947^M
==21279== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)^M
==21279== by 0x4C2FDEF: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)^M
==21279== by 0x76CB31: d_growable_string_resize (cp-demangle.c:3963)^M
==21279== by 0x76CB31: d_growable_string_init (cp-demangle.c:3942)^M
==21279== by 0x76CB31: cplus_demangle_print (cp-demangle.c:4308)^M
==21279== by 0x4C9535: cp_comp_to_string(demangle_component*, int) (cp-name-parser.y:1972)^M
==21279== by 0x53EF14: cp_canonicalize_string[abi:cxx11](char const*) (cp-support.c:569)^M
==21279== by 0x561B75: dwarf2_canonicalize_name(char const*, dwarf2_cu*, obstack*) [clone .isra.210] (dwarf2read.c:20159)
This patch fixes the leak. It is a regression by 2f408ecb.
gdb:
2017-08-09 Alex Lindsay <alexlindsay239@gmail.com>
Yao Qi <yao.qi@linaro.org>
* cp-support.c (cp_canonicalize_string_full): Use
gdb::unique_xmalloc_ptr<char>.
(cp_canonicalize_string): Likewise.
|
|
In GDBserver, only tdesc_i386 and tdesc_amd64 are used. There is no point
of generating these *.dat files (which are used to generate *.c files during
GDBserver build.).
gdb:
2017-08-09 Yao Qi <yao.qi@linaro.org>
* features/Makefile (WHICH): Remove i386/ non-linux stuff.
* regformats/i386/amd64-avx-avx512.dat: Remove.
* regformats/i386/amd64-avx-mpx-avx512-pku.dat: Remove.
* regformats/i386/amd64-avx-mpx.dat:Remove.
* regformats/i386/amd64-avx.dat: Remove.
* regformats/i386/amd64-mpx.dat: Remove.
* regformats/i386/i386-avx-avx512.dat: Remove.
* regformats/i386/i386-avx-mpx-avx512-pku.dat: Remove.
* regformats/i386/i386-avx-mpx.dat: Remove.
* regformats/i386/i386-mmx.dat: Remove.
* regformats/i386/i386-mpx.dat: Remove.
gdb/gdbserver:
2017-08-09 Yao Qi <yao.qi@linaro.org>
* configure.srv (srv_i386_regobj): Remove i386-avx.o,
i386-avx-avx512.o, i386-avx-mpx-avx512-pku.o, i386-mpx.o,
i386-avx-mpx.o and i386-mmx.o.
(srv_amd64_regobj): Remove amd64-avx.o, amd64-avx-avx512.o,
amd64-avx-mpx-avx512-pku.o, amd64-mpx.o and amd64-avx-mpx.o.
(srv_i386_xmlfiles): Remove i386/i386-avx.xml,
i386/i386-avx-avx512.xml, i386/i386-avx-mpx-avx512-pku.xml,
i386/i386-mpx.xml, i386/i386-avx-mpx.xml and i386/i386-mmx.xml.
(srv_amd64_xmlfile):i386/amd64-avx.xml, i386/amd64-avx-avx512.xml,
i386/amd64-avx-mpx-avx512-pku.xml, i386/amd64-mpx.xml,
i386/amd64-avx-mpx.xml.
|
|
x32 non-linux target descriptions are not used in GDB or GDBserver. This
patch removes them.
gdb:
2017-08-09 Yao Qi <yao.qi@linaro.org>
* amd64-tdep.h (tdesc_x32): Remove the declaration.
* amd64-tdep.c: Don't include features/i386/x32*.c.
(_initialize_amd64_tdep): Don't call initialize_tdesc_x32*
functions.
* features/Makefile (WHICH): Remove i386/x32, i386/x32-avx,
and i386/x32-avx-avx512.
(XMLTOC): Remove i386/x32-avx.xml, i386/x32-avx-avx512.xml,
and i386/x32.xml.
* features/i386/x32-avx-avx512.c: Removed.
* features/i386/x32-avx-avx512.xml: Removed.
* features/i386/x32-avx.c: Removed.
* features/i386/x32-avx.xml: Removed.
* features/i386/x32.c: Removed.
* features/i386/x32.xml: Removed.
* regformats/i386/x32-avx-avx512.dat: Removed.
* regformats/i386/x32-avx.dat: Removed.
* regformats/i386/x32.dat: Removed.
gdb/gdbserver:
2017-08-09 Yao Qi <yao.qi@linaro.org>
* configure.srv (srv_amd64_regobj): Remove x32.o, x32-avx.o
and x32-avx-avx512.o.
(srv_amd64_xmlfiles): Remove i386/x32.xml, i386/x32-avx.xml
i386/x32-avx-avx512.xml.
|
|
I noticed that the patch pushed previously had an open bug about it, so
add a reference to it.
|
|
Fix a commit cd6c3b4ffc4e ("New gdbarch methods breakpoint_kind_from_pc
and sw_breakpoint_from_kind") regression and restore the use of
`->placed_address' rather than `->reqstd_address' as the location for a
memory breakpoint to be inserted at. Previously
`gdbarch_breakpoint_from_pc' was used that made that adjustment in
`default_memory_insert_breakpoint' from the preinitialized value,
however with the said commit that call is gone, so the passed
`->placed_address' has to be used for the initialization.
The regression manifests itself as the inability to debug any MIPS/Linux
compressed ISA dynamic executable as GDB corrupts the dynamic loader
with one of its implicit breakpoints, causing the program to crash, as
seen for example with the `mips-linux-gnu' target, o32 ABI, MIPS16 code,
and the gdb.base/advance.exp test case:
(gdb) continue
Continuing.
Program received signal SIGBUS, Bus error.
_dl_debug_initialize (ldbase=0, ns=0) at dl-debug.c:51
51 r = &_r_debug;
(gdb) FAIL: gdb.base/advance.exp: Can't run to main
gdb/
PR breakpoints/21886
* mem-break.c (default_memory_insert_breakpoint): Use
`->placed_address' rather than `->reqstd_address' for the
breakpoint location.
|
|
Fix `set architecture' and `set endian' command disassembly regressions
from commit 39503f82427e ("Delegate opcodes to select disassembler in
GDB"), and commit 003ca0fd2286 ("Refactor disassembler selection"), as
well as a MIPS compressed ISA disassembly target regression from commit
6394c606997f ("Don't use print_insn_XXX in GDB"), which caused assertion
failures to trigger.
For example with the `mips-linux-gnu' target we get:
$ cat main.c
int
main (void)
{
return 0;
}
$ gcc -mips32r2 -O2 main.c -o main
$ gcc -mips16 -mips32r2 -O2 main.c -o main16
$ gdb
GNU gdb (GDB) 8.0.50.20170731-git
[...]
(gdb) file main
Reading symbols from main...done.
(gdb) show architecture
The target architecture is set automatically (currently mips:isa32r2)
(gdb) show endian
The target endianness is set automatically (currently big endian)
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>: jr ra
0x00400504 <+4>: move v0,zero
End of assembler dump.
(gdb) set architecture mips:isa64r2
The target architecture is assumed to be mips:isa64r2
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>:
.../gdb/arch-utils.c:979: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->mach == bfd_get_mach (exec_bfd)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
[...]
Command aborted.
(gdb) set architecture auto
The target architecture is set automatically (currently mips:isa32r2)
(gdb) set endian little
The target is assumed to be little endian
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>:
.../gdb/arch-utils.c:978: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->endian == (bfd_big_endian (exec_bfd) ? BFD_ENDIAN_BIG : BFD_ENDIAN_LITTLE)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
[...]
Command aborted.
(gdb) set endian auto
The target endianness is set automatically (currently big endian)
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>:
.../gdb/arch-utils.c:976: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->arch == bfd_get_arch (exec_bfd)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
[...]
Command aborted.
(gdb) set architecture auto
The target architecture is set automatically (currently mips:isa32r2)
(gdb) file main16
Load new symbol table from "main16"? (y or n) y
Reading symbols from main16...done.
(gdb) disassemble main
Dump of assembler code for function main:
0x00400501 <+0>:
.../gdb/arch-utils.c:979: internal-error: int default_print_insn(bfd_vma, disassemble_info*): Assertion `info->mach == bfd_get_mach (exec_bfd)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n) n
Command aborted.
(gdb)
Remove the assertions then, restoring previous semantics:
(gdb) file main
Reading symbols from main...done.
(gdb) set architecture mips:isa64r2
The target architecture is assumed to be mips:isa64r2
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>: jr ra
0x00400504 <+4>: move v0,zero
End of assembler dump.
(gdb) set endian little
The target is assumed to be little endian
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>: j 0x3800c
0x00400504 <+4>: addiu s0,t0,0
End of assembler dump.
(gdb) set architecture i386
The target architecture is assumed to be i386
(gdb) disassemble main
Dump of assembler code for function main:
0x00400500 <+0>: add %eax,%esp
0x00400502 <+2>: add %cl,(%eax)
0x00400504 <+4>: add %al,(%eax)
0x00400506 <+6>: adc %ah,0x0
End of assembler dump.
(gdb) set architecture auto
The target architecture is set automatically (currently mips:isa32r2)
(gdb) set endian auto
The target endianness is set automatically (currently big endian)
(gdb) file main16
Load new symbol table from "main16"? (y or n) y
Reading symbols from main16...done.
(gdb) disassemble main
Dump of assembler code for function main:
0x00400501 <+0>: jr ra
0x00400503 <+2>: li v0,0
End of assembler dump.
(gdb)
gdb/
* arch-utils.c (default_print_insn): Remove arch/mach/endian
assertions.
opcodes/
* disassemble.c (disassembler): Remove arch/mach/endian
assertions.
|
|
As an update to commit ede5f15146ae ("gdbarch.h: Change
gdbarch_info::tdep_info's type to void *") replace the definition of the
`tdep_info' member in `struct gdbarch_info' with an anonymous union,
comprising the original member, with its type reverted to `struct
gdbarch_tdep_info *', a `tdesc_data' member of a `struct tdesc_arch_data
*' type and an `id' member of an `int *' type. Remove now unnecessary
casts throughout use places then, making code easier to read an less
prone to errors, which may happen with casting.
gdb/
* gdbarch.sh (gdbarch_info): Replace the `tdep_info' member with
a union of `tdep_info', `tdesc_data' and `id'.
* aarch64-tdep.c (aarch64_gdbarch_init): Use `info.tdesc_data'
rather than `info.tdep_info'.
* amd64-linux-tdep.c (amd64_linux_init_abi): Likewise.
* i386-linux-tdep.c (i386_linux_init_abi): Likewise.
* i386-tdep.c (i386_gdbarch_init): Likewise.
* mips-linux-tdep.c (mips_linux_init_abi): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* rs6000-tdep.c (rs6000_gdbarch_init): Likewise.
* ppc-linux-tdep.c (ppu2spu_sniffer): Use `info.id' rather than
`info.tdep_info'.
(ppc_linux_init_abi): Use `info.tdesc_data' rather than
`info.tdep_info'.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* spu-multiarch.c (spu_gdbarch): Use `info.id' rather than
`info.tdep_info'.
* spu-tdep.c (spu_gdbarch_init): Likewise.
* gdbarch.h: Regenerate.
|
|
The dwarf2_string_attr did not allow DW_FORM_GNU_str_index as a form for
string types. This manifested as null strings in the namespace_name
lookup (replaced with "(anonymous namespace)") when debugging
Fission-compiled code.
gdb/ChangeLog:
* dwarf2read.c (dwarf2_string_attr): Allow DW_FORM_GNU_strp_alt.
|
|
The recent change introducing gdb_argv introduced some build failures in
remote-sim.c.
/home/emaisin/src/binutils-gdb/gdb/remote-sim.c: In function 'void gdbsim_load(target_ops*, const char*, int)':
/home/emaisin/src/binutils-gdb/gdb/remote-sim.c:573:22: error: conflicting declaration 'gdb_argv argv'
gdb_argv argv (args);
^
/home/emaisin/src/binutils-gdb/gdb/remote-sim.c:565:10: note: previous declaration as 'char** argv'
char **argv;
^~~~
/home/emaisin/src/binutils-gdb/gdb/remote-sim.c: In function 'void gdbsim_open(const char*, int)':
/home/emaisin/src/binutils-gdb/gdb/remote-sim.c:730:25: error: declaration of 'gdb_argv args' shadows a parameter
gdb_argv args (arg_buf);
In gdbsim_load, the new gdb_argv object conflicts with old char **argv
variable. I think the old variable should be removed.
In gdbsim_open, the new gdb_argv object conflicts with the args
parameter. This patch renames it to argv.
Built-tested for a mips host.
gdb/ChangeLog:
* remote-sim.c (gdbsim_load): Remove char **argv local variable.
(gdbsim_open): Rename gdb_argv args object to argv.
|
|
This patch changes most sites calling tilde_expand to use
gdb::unique_xmalloc_ptr, rather than a cleanup. It also changes
scan_expression_with_cleanup to return a unique pointer, because the
patch was already touching code in that area.
Regression tested on the buildbot.
ChangeLog
2017-08-05 Tom Tromey <tom@tromey.com>
* compile/compile-object-load.c (compile_object_load): Use
gdb::unique_xmalloc_ptr.
* cli/cli-dump.c (scan_filename): Rename from
scan_filename_with_cleanup. Change return type.
(scan_expression): Rename from scan_expression_with_cleanup.
Change return type.
(dump_memory_to_file, dump_value_to_file, restore_command):
Use gdb::unique_xmalloc_ptr. Update.
* cli/cli-cmds.c (find_and_open_script): Use
gdb::unique_xmalloc_ptr.
* tracefile-tfile.c (tfile_open): Use gdb::unique_xmalloc_ptr.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols): Use gdb::unique_xmalloc_ptr.
* symfile.c (symfile_bfd_open, generic_load)
(add_symbol_file_command, remove_symbol_file_command): Use
gdb::unique_xmalloc_ptr.
* source.c (openp): Use gdb::unique_xmalloc_ptr.
* psymtab.c (maintenance_print_psymbols): Use
gdb::unique_xmalloc_ptr.
* corelow.c (core_open): Use gdb::unique_xmalloc_ptr.
* breakpoint.c (save_breakpoints): Use gdb::unique_xmalloc_ptr.
* solib.c (solib_map_sections): Use gdb::unique_xmalloc_ptr.
(reload_shared_libraries_1): Likewise.
|
|
I ran the gdb.rust tests against Rust 1.20 (beta) and saw a few
failures. The failures all came because a particular item moved to a
different module. Since the particular choice of module name isn't
important here, I simply widened the allowable results.
Tested locally against rustc 1.19, 1.20, and 1.21.
testsuite/ChangeLog
2017-08-05 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Allow String to appear in a different
namespace.
|
|
This removes the few remaining cleanups in the Rust language code.
The main difficulty here was that the earlier code allocated VEC heads
on an obstack. The new code instead introduces an object that
allocates and maintains the storage for whatever vectors are needed
during the parse.
Regression tested on the buildbot.
ChangeLog
2017-08-05 Tom Tromey <tom@tromey.com>
* rust-exp.y (rust_op_ptr, set_field): Remove typedefs.
(rust_op_vector, rust_set_vector): New typedefs.
(current_parser): New global.
(work_obstack): Change to pointer type. Update all users.
(rust_ast, pstate): Remove globals.
(struct rust_parser): New.
(%union) <params, field_inits>: Change type.
(start, tuple_expr, unit_expr, struct_expr_list, literal)
(field_expr, expr_list, maybe_expr_list, type_list): Update.
(ast_call_ish, ast_path, ast_function_type, ast_tuple_type)
(convert_params_to_types, convert_params_to_expression): Change
type of "params".
(ast_string): Change type of "fields".
(rust_parse): Make a rust_parser. Remove cleanups.
(rust_lex_tests): Make and install an auto_obstack.
|
|
When I verify my target description changes, I build GDB and GDBserver for
x32, but it failed.
/../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c: In function ‘const target_desc* get_ipa_tdesc(int)’:
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c:184:10: error: ‘X86_TDESC_AVX512’ was not declared in this scope
case X86_TDESC_AVX512:
^
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c:185:14: error: ‘tdesc_x32_avx512_linux’ was not declared in this scope
return tdesc_x32_avx512_linux;
^
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c: In function ‘void initialize_low_tracepoint()’:
../../../binutils-gdb/gdb/gdbserver/linux-amd64-ipa.c:282:36: error: ‘init_registers_x32_avx512_linux’ was not declared in this scope
init_registers_x32_avx512_linux ();
^
ipa_x32_linux_regobj use to be there, but removed by
22049425ce40324139be82d9a6ec518c46b65815 by mistake.
gdb/gdbserver:
2017-08-04 Yao Qi <yao.qi@linaro.org>
* configure.srv (ipa_x32_linux_regobj): New.
* linux-amd64-ipa.c (get_ipa_tdesc): Use X86_TDESC_AVX_AVX512
instead of X86_TDESC_AVX512.
(initialize_low_tracepoint): Call
init_registers_x32_avx_avx512_linux.
|
|
This patch fixes the build failure for target i686-w64-mingw32,
In file included from ../../binutils-gdb/gdb/defs.h:786:0,
from ../../binutils-gdb/gdb/gdb.c:19:
../../binutils-gdb/gdb/utils.h:188:20: error: ‘nullptr_t’ has not been declared
bool operator!= (nullptr_t)
^
../../binutils-gdb/gdb/utils.h:193:20: error: ‘nullptr_t’ has not been declared
bool operator== (nullptr_t)
^
gdb:
2017-08-04 Yao Qi <yao.qi@linaro.org>
* utils.h (gdb_argv): Add namespace std for nullptr_t.
|
|
|
|
After the previous patches in this series, make_cleanup_freeargv and
gdb_buildargv are now unused and can be removed.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* utils.c (make_cleanup_freeargv, do_freeargv, gdb_buildargv):
Remove.
* utils.h (make_cleanup_freeargv, gdb_buildargv): Remove.
|
|
This changes one spot in the Python code to use gdb_argv. This
removes the last cleanup from the Python layer.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* python/py-param.c (compute_enum_values): Use gdb_argv.
|
|
This introduces gdb_argv, a class wrapping an "argv" pointer; that is,
a pointer to a NULL-terminated array of char*, where both the array
and each non-NULL element in the array are xmalloc'd.
This patch then changes most users of gdb_buildargv to use gdb_argv
instead.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* utils.h (struct gdb_argv_deleter): New.
(gdb_argv): New class.
* utils.c (gdb_argv::reset): New method.
* tracepoint.c (delete_trace_variable_command): Use gdb_argv.
* tracefile.c (tsave_command): Use gdb_argv.
* top.c (new_ui_command): Use gdb_argv.
* symmisc.c (maintenance_print_symbols)
(maintenance_print_msymbols, maintenance_expand_symtabs): Use gdb_argv.
* symfile.c (symbol_file_command, generic_load)
(remove_symbol_file_command): Use gdb_argv.
* stack.c (backtrace_command): Use gdb_argv.
* source.c (add_path, show_substitute_path_command)
(unset_substitute_path_command, set_substitute_path_command):
Use gdb_argv.
* skip.c (skip_command): Use gdb_argv. Use gdb_buildargv.
* ser-mingw.c (pipe_windows_open): Use gdb_argv.
* remote.c (extended_remote_run, remote_put_command)
(remote_get_command, remote_delete_command): Use gdb_argv.
* remote-sim.c (gdbsim_load, gdbsim_create_inferior)
(gdbsim_open): Use gdb_argv.
* python/py-cmd.c (gdbpy_string_to_argv): Use gdb_argv.
* psymtab.c (maintenance_print_psymbols): Use gdb_argv.
* procfs.c (procfs_info_proc): Use gdb_argv.
* interps.c (interpreter_exec_cmd): Use gdb_argv.
* infrun.c (handle_command): Use gdb_argv.
* inferior.c (add_inferior_command, clone_inferior_command):
Use gdb_argv.
* guile/scm-string.c (gdbscm_string_to_argv): Use gdb_argv.
* exec.c (exec_file_command): Use gdb_argv.
* cli/cli-cmds.c (alias_command): Use gdb_argv.
* compile/compile.c (build_argc_argv): Use gdb_argv.
|
|
This removes cleanups from gdbpy_decode_line, in favor of a use of
unique_xmalloc_ptr.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_decode_line): Use unique_xmalloc_ptr.
|
|
This changes a few places in the Python code to avoid manual memory
management, in favor of letting std::string do the work.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* python/python.c (compute_python_string): Return std::string.
(gdbpy_eval_from_control_command): Update.
(do_start_initialization): Use std::string.
* python/py-varobj.c (py_varobj_iter_next): Use string_printf, not
xstrprintf.
* python/py-breakpoint.c (local_setattro): Use string_printf, not
xstrprintf.
|
|
This changes the users of do_restore_instream_cleanup to use a
scoped_restore instead. This patch is broken out because it warrants
some additional attention: in particular it's unclear to me whether
current_ui can change in the body of these functions -- but if it can,
then the cleanup would have modified a different UI's instream member.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* top.h (do_restore_instream_cleanup): Remove.
* top.c (do_restore_instream_cleanup): Remove.
(read_command_file): Use scoped_restore.
* cli/cli-script.c (execute_user_command): Use scoped_restore.
|
|
This changes a couple of places to use a scoped_restore when
manipulating command_nest_depth.
ChangeLog
2017-08-03 Tom Tromey <tom@tromey.com>
* cli/cli-script.c (execute_user_command)
(execute_control_command): Use scoped_restore.
|
