aboutsummaryrefslogtreecommitdiff
path: root/gdb/probe.h
AgeCommit message (Collapse)AuthorFilesLines
2023-01-01Update copyright year range in header of all files managed by GDBJoel Brobecker1-1/+1
This commit is the result of running the gdb/copyright.py script, which automated the update of the copyright year range for all source files managed by the GDB project to be updated to include year 2023.
2022-12-31[gdb/cli] Add maintenance ignore-probesTom de Vries1-0/+5
There's a command "disable probes", but SystemTap probes, for instance libc:longjmp cannot be disabled: ... $ gdb -q -batch a.out -ex start -ex "disable probes libc ^longjmp$" ... Probe libc:longjmp cannot be disabled. Probe libc:longjmp cannot be disabled. Probe libc:longjmp cannot be disabled. ... Add a command "maintenance ignore-probes" that ignores probes during get_probes, such that we can easily pretend to use a libc without the libc:longjmp probe: ... (gdb) maint ignore-probes -verbose libc ^longjmp$ ignore-probes filter has been set to: PROVIDER: 'libc' PROBE_NAME: '^longjmp$' OBJNAME: '' (gdb) start ^M ... Ignoring SystemTap probe libc longjmp in /lib64/libc.so.6.^M Ignoring SystemTap probe libc longjmp in /lib64/libc.so.6.^M Ignoring SystemTap probe libc longjmp in /lib64/libc.so.6.^M ... The "Ignoring ..." messages can be suppressed by not using -verbose. Note that as with "disable probes", running simply "maint ignore-probes" ignores all probes. The ignore-probes filter can be reset by using: ... (gdb) maint ignore-probes -reset ignore-probes filter has been reset ... For now, the command is only supported for SystemTap probes. PR cli/27159 Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27159
2022-10-10Change GDB to use frame_info_ptrTom Tromey1-2/+2
This changes GDB to use frame_info_ptr instead of frame_info * The substitution was done with multiple sequential `sed` commands: sed 's/^struct frame_info;/class frame_info_ptr;/' sed 's/struct frame_info \*/frame_info_ptr /g' - which left some issues in a few files, that were manually fixed. sed 's/\<frame_info \*/frame_info_ptr /g' sed 's/frame_info_ptr $/frame_info_ptr/g' - used to remove whitespace problems. The changed files were then manually checked and some 'sed' changes undone, some constructors and some gets were added, according to what made sense, and what Tromey originally did Co-Authored-By: Bruno Larsen <blarsen@redhat.com> Approved-by: Tom Tomey <tom@tromey.com>
2022-06-17event_location -> location_specPedro Alves1-2/+2
Currently, GDB internally uses the term "location" for both the location specification the user input (linespec, explicit location, or an address location), and for actual resolved locations, like the breakpoint locations, or the result of decoding a location spec to SaLs. This is expecially confusing in the breakpoints module, as struct breakpoint has these two fields: breakpoint::location; breakpoint::loc; "location" is the location spec, and "loc" is the resolved locations. And then, we have a method called "locations()", which returns the resolved locations as range... The location spec type is presently called event_location: /* Location we used to set the breakpoint. */ event_location_up location; and it is described like this: /* The base class for all an event locations used to set a stop event in the inferior. */ struct event_location { and even that is incorrect... Location specs are used for finding actual locations in the program in scenarios that have nothing to do with stop events. E.g., "list" works with location specs. To clean all this confusion up, this patch renames "event_location" to "location_spec" throughout, and then all the variables that hold a location spec, they are renamed to include "spec" in their name, like e.g., "location" -> "locspec". Similarly, functions that work with location specs, and currently have just "location" in their name are renamed to include "spec" in their name too. Change-Id: I5814124798aa2b2003e79496e78f95c74e5eddca
2022-01-01Automatic Copyright Year update after running gdb/copyright.pyJoel Brobecker1-1/+1
This commit brings all the changes made by running gdb/copyright.py as per GDB's Start of New Year Procedure. For the avoidance of doubt, all changes in this commits were performed by the script.
2021-01-01Update copyright year range in all GDB filesJoel Brobecker1-1/+1
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2020-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files.
2019-10-15gdb: Update comments that reference VEC or vec.hAndrew Burgess1-1/+1
With the removal of the old VEC mechanism from the code base, update comments that still make reference to VECs. There should be no user visible changes after this commit. gdb/ChangeLog: * linespec.c (decode_digits_ordinary): Update comment. * make-target-delegates: No longer need to handle VEC case. * memrange.c (normalize_mem_ranges): Update comment. * namespace.c (add_using_directive): Update comment. * objc-lang.c (uniquify_strings): Update comment. * ppc-linux-nat.c (struct thread_points): Update comment. * probe.h (find_probes_in_objfile): Update comment. * target.h (enum flash_preserve_mode): Update comment. * varobj.c (varobj_restrict_range): Update comment. * varobj.h (varobj_list_children): Update comment. Change-Id: Iefd2e903705c3e79cd13b43395c7a1c167f9a088
2019-09-02Use gdbarch for probe::get_argument_countAlan Hayward1-1/+1
The probe function get_argument_count does not need a frame, only the current gdbarch. Switch the code to pass gdbarch instead. No functional changes. gdb/ChangeLog: * break-catch-throw.c (fetch_probe_arguments): Use gdbarch. * dtrace-probe.c (dtrace_probe::get_argument_count): Likewise. * probe.c (probe_safe_evaluate_at_pc) (compute_probe_arg) (compile_probe_arg): Likewise. * probe.h (get_argument_count): Likewise. * solib-svr4.c (solib_event_probe_action): Likewise. * stap-probe.c (stap_probe::get_argument_count): Likewise.
2019-07-10Don't include gdbarch.h from defs.hTom Tromey1-0/+2
I touched symtab.h and was surprised to see how many files were rebuilt. I looked into it a bit, and found that defs.h includes gdbarch.h, which in turn includes many things. gdbarch.h is only needed by a minority ofthe files in gdb, so this patch removes the include from defs.h and updates the fallout. I did "wc -l" on the files in build/gdb/.deps; this patch reduces the line count from 139935 to 137030; so there are definitely future build-time savings here. Note that while I configured with --enable-targets=all, it's possible that some *-nat.c file needs an update. I could not test all of these. The buildbot caught a few problems along these lines. gdb/ChangeLog 2019-07-10 Tom Tromey <tom@tromey.com> * defs.h: Don't include gdbarch.h. * aarch64-ravenscar-thread.c, aarch64-tdep.c, alpha-bsd-tdep.h, alpha-linux-tdep.c, alpha-mdebug-tdep.c, arch-utils.h, arm-tdep.h, ax-general.c, btrace.c, buildsym-legacy.c, buildsym.h, c-lang.c, cli/cli-decode.h, cli/cli-dump.c, cli/cli-script.h, cli/cli-style.h, coff-pe-read.h, compile/compile-c-support.c, compile/compile-cplus.h, compile/compile-loc2c.c, corefile.c, cp-valprint.c, cris-linux-tdep.c, ctf.c, d-lang.c, d-namespace.c, dcache.c, dicos-tdep.c, dictionary.c, disasm-selftests.c, dummy-frame.c, dummy-frame.h, dwarf2-frame-tailcall.c, dwarf2expr.c, expression.h, f-lang.c, frame-base.c, frame-unwind.c, frv-linux-tdep.c, gdbarch-selftests.c, gdbtypes.h, go-lang.c, hppa-nbsd-tdep.c, hppa-obsd-tdep.c, i386-dicos-tdep.c, i386-tdep.h, ia64-vms-tdep.c, interps.h, language.c, linux-record.c, location.h, m2-lang.c, m32r-linux-tdep.c, mem-break.c, memattr.c, mn10300-linux-tdep.c, nios2-linux-tdep.c, objfiles.h, opencl-lang.c, or1k-linux-tdep.c, p-lang.c, parser-defs.h, ppc-tdep.h, probe.h, python/py-record-btrace.c, record-btrace.c, record.h, regcache-dump.c, regcache.h, riscv-fbsd-tdep.c, riscv-linux-tdep.c, rust-exp.y, sh-linux-tdep.c, sh-nbsd-tdep.c, source-cache.c, sparc-nbsd-tdep.c, sparc-obsd-tdep.c, sparc-ravenscar-thread.c, sparc64-fbsd-tdep.c, std-regs.c, target-descriptions.h, target-float.c, tic6x-linux-tdep.c, tilegx-linux-tdep.c, top.c, tracefile.c, trad-frame.c, type-stack.h, ui-style.c, utils.c, utils.h, valarith.c, valprint.c, varobj.c, x86-tdep.c, xml-support.h, xtensa-linux-tdep.c, cli/cli-cmds.h: Update. * s390-linux-nat.c, procfs.c, inf-ptrace.c: Likewise.
2019-05-08Convert probes to type-safe registry APITom Tromey1-1/+1
This changes the probes code in elfread.c to use the type-safe registry API. While doing this, I saw that the caller of get_probes owns the probes, so I went through the code and changed the vectors to store unique_ptrs, making the ownership relationship more clear. gdb/ChangeLog 2019-05-08 Tom Tromey <tom@tromey.com> * symfile.h (struct sym_probe_fns) <sym_get_probes>: Change type. * symfile-debug.c (debug_sym_get_probes): Change type. * stap-probe.c (handle_stap_probe): (stap_static_probe_ops::get_probes): Change type. * probe.h (class static_probe_ops) <get_probes>: Change type. * probe.c (class any_static_probe_ops) <get_probes>: Change type. (parse_probes_in_pspace): Update. (find_probes_in_objfile, find_probe_by_pc, collect_probes): Update. (any_static_probe_ops::get_probes): Change type. * elfread.c (elfread_data): New typedef. (probe_key): Change type. (elf_get_probes): Likewise. Update. (probe_key_free): Remove. (_initialize_elfread): Update. * dtrace-probe.c (class dtrace_static_probe_ops) <get_probes>: Change type. (dtrace_process_dof_probe, dtrace_process_dof) (dtrace_static_probe_ops::get_probe): Change type.
2019-01-01Update copyright year range in all GDB files.Joel Brobecker1-1/+1
This commit applies all changes made after running the gdb/copyright.py script. Note that one file was flagged by the script, due to an invalid copyright header (gdb/unittests/basic_string_view/element_access/char/empty.cc). As the file was copied from GCC's libstdc++-v3 testsuite, this commit leaves this file untouched for the time being; a patch to fix the header was sent to gcc-patches first. gdb/ChangeLog: Update copyright year range in all GDB files.
2018-01-02Update copyright year range in all GDB filesJoel Brobecker1-1/+1
gdb/ChangeLog: Update copyright year range in all GDB files
2017-11-22Convert generic probe interface to C++ (and perform some cleanups)Sergio Durigan Junior1-180/+178
This patch converts the generic probe interface (gdb/probe.[ch]) to C++, and also performs some cleanups that were on my TODO list for a while. The main changes were the conversion of 'struct probe' to 'class probe', and 'struct probe_ops' to 'class static_probe_ops'. The former now contains all the "dynamic", generic methods that act on a probe + the generic data related to it; the latter encapsulates a bunch of "static" methods that relate to the probe type, but not to a specific probe itself. I've had to do a few renamings (e.g., on 'struct bound_probe' the field is called 'probe *prob' now, instead of 'struct probe *probe') because GCC was complaining about naming the field using the same name as the class. Nothing major, though. Generally speaking, the logic behind and the design behind the code are the same. Even though I'm sending a series of patches, they need to be tested and committed as a single unit, because of inter-dependencies. But it should be easier to review in separate logical units. I've regtested this patch on BuildBot, no regressions found. gdb/ChangeLog: 2017-11-22 Sergio Durigan Junior <sergiodj@redhat.com> * break-catch-throw.c (fetch_probe_arguments): Use 'probe.prob' instead of 'probe.probe'. * breakpoint.c (create_longjmp_master_breakpoint): Call 'can_evaluate_arguments' and 'get_relocated_address' methods from probe. (create_exception_master_breakpoint): Likewise. (add_location_to_breakpoint): Use 'sal->prob' instead of 'sal->probe'. (bkpt_probe_insert_location): Call 'set_semaphore' method from probe. (bkpt_probe_remove_location): Likewise, for 'clear_semaphore'. * elfread.c (elf_get_probes): Use 'static_probe_ops' instead of 'probe_ops'. (probe_key_free): Call 'delete' on probe. (check_exception_resume): Use 'probe.prob' instead of 'probe.probe'. * location.c (string_to_event_location_basic): Call 'probe_linespec_to_static_ops'. * probe.c (class any_static_probe_ops): New class. (any_static_probe_ops any_static_probe_ops): New variable. (parse_probes_in_pspace): Receive 'static_probe_ops' as argument. Adjust code to reflect change. (parse_probes): Use 'static_probe_ops' instead of 'probe_ops'. Adjust code to reflect change. (find_probes_in_objfile): Call methods to get name and provider from probe. (find_probe_by_pc): Use 'result.prob' instead of 'result.probe'. Call 'get_relocated_address' method from probe. (collect_probes): Adjust comment and argument list to receive 'static_probe_ops' instead of 'probe_ops'. Adjust code to reflect change. Call necessary methods from probe. (compare_probes): Call methods to get name and provider from probes. (gen_ui_out_table_header_info): Receive 'static_probe_ops' instead of 'probe_ops'. Use 'std::vector' instead of VEC, adjust code accordingly. (print_ui_out_not_applicables): Likewise. (info_probes_for_ops): Rename to... (info_probes_for_spops): ...this. Receive 'static_probe_ops' as argument instead of 'probe_ops'. Adjust code. Call necessary methods from probe. (info_probes_command): Use 'info_probes_for_spops'. (enable_probes_command): Pass correct argument to 'collect_probes'. Call methods from probe. (disable_probes_command): Likewise. (get_probe_address): Move to 'any_static_probe_ops::get_address'. (get_probe_argument_count): Move to 'any_static_probe_ops::get_argument_count'. (can_evaluate_probe_arguments): Move to 'any_static_probe_ops::can_evaluate_arguments'. (evaluate_probe_argument): Move to 'any_static_probe_ops::evaluate_argument'. (probe_safe_evaluate_at_pc): Use 'probe.prob' instead of 'probe.probe'. (probe_linespec_to_ops): Rename to... (probe_linespec_to_static_ops): ...this. Adjust code. (probe_any_is_linespec): Rename to... (any_static_probe_ops::is_linespec): ...this. (probe_any_get_probes): Rename to... (any_static_probe_ops::get_probes): ...this. (any_static_probe_ops::type_name): New method. (any_static_probe_ops::gen_info_probes_table_header): New method. (compute_probe_arg): Use 'pc_probe.prob' instead of 'pc_probe.probe'. Call methods from probe. (compile_probe_arg): Likewise. (std::vector<const probe_ops *> all_probe_ops): Delete. (std::vector<const static_probe_ops *> all_static_probe_ops): New variable. (_initialize_probe): Use 'all_static_probe_ops' instead of 'all_probe_ops'. * probe.h (struct info_probe_column) <field_name>: Delete extraneous newline (info_probe_column_s): Delete type and VEC. (struct probe_ops): Delete. Replace with... (class static_probe_ops): ...this and... (clas probe): ...this. (struct bound_probe) <bound_probe>: Delete extraneous newline. Adjust constructor to receive 'probe' instead of 'struct probe'. <probe>: Rename to... <prob>: ...this. Delete extraneous newline. <objfile>: Delete extraneous newline. (register_probe_ops): Delete unused prototype. (info_probes_for_ops): Rename to... (info_probes_for_spops): ...this. Adjust comment. (get_probe_address): Move to 'probe::get_address'. (get_probe_argument_count): Move to 'probe::get_argument_count'. (can_evaluate_probe_arguments): Move to 'probe::can_evaluate_arguments'. (evaluate_probe_argument): Move to 'probe::evaluate_argument'. * solib-svr4.c (struct svr4_info): Adjust comment. (struct probe_and_action) <probe>: Rename to... <prob>: ...this. (register_solib_event_probe): Receive 'probe' instead of 'struct probe' as argument. Use 'prob' instead of 'probe' when applicable. (solib_event_probe_action): Call 'get_argument_count' method from probe. Adjust comment. (svr4_handle_solib_event): Adjust comment. Call 'evaluate_argument' method from probe. (svr4_create_probe_breakpoints): Call 'get_relocated_address' from probe. (svr4_create_solib_event_breakpoints): Use 'probe' instead of 'struct probe'. Call 'can_evaluate_arguments' from probe. * symfile.h: Forward declare 'class probe' instead of 'struct probe'. * symtab.h: Likewise. (struct symtab_and_line) <probe>: Rename to... <prob>: ...this. * tracepoint.c (start_tracing): Use 'prob' when applicable. Call probe methods. (stop_tracing): Likewise.
2017-10-27Get rid of VEC(probe_p)Simon Marchi1-12/+4
Replace the remaining usages of VEC(probe_p) with std::vector. Regtested on the buildbot. gdb/ChangeLog: * probe.h: Don't include gdb_vecs.h. (DEF_VEC_P (probe_p)): Remove. (find_probes_in_objfile): Return an std::vector. * probe.c (find_probes_in_objfile): Likewise. * breakpoint.c (breakpoint_objfile_data) <longjmp_probes>: Change type to std::vector. <exception_probes>: Likewise. (free_breakpoint_probes): Don't manually free vectors. (create_longjmp_master_breakpoint): Adjust. (create_exception_master_breakpoint): Adjust. * solib-svr4.c (svr4_create_probe_breakpoints): Change parameter type, adjust. (svr4_create_solib_event_breakpoints): Adjust.
2017-09-12probe: Replace VEC(probe_ops_cp) with std::vectorSimon Marchi1-3/+1
This patch replaces the usage of VEC to store pointers to probe_ops with an std::vector. The sole usage of that vector type is one global variable that holds the ops for the various kinds of probes, so this is pretty straightforward (no allocation/deallocation issues). gdb/ChangeLog: * probe.h (probe_ops_cp): Remove typedef. (DEF_VEC_P (probe_ops_cp)): Remove. (all_probe_ops): Change type to std::vector. * probe.c (info_probes_for_ops): Adjust to vector change. (probe_linespec_to_ops): Likewise. (all_probe_ops): Change type to std::vector. (_initialize_probe): Adjust to vector change. * dtrace-probe.c (_initialize_dtrace_probe): Likewise. * elfread.c (elf_get_probes): Likewise. * stap-probe.c (_initialize_stap_probe): Likewise.
2017-09-12Make collect_probes return an std::vectorSimon Marchi1-6/+17
Change collect_probes so it returns an std::vector<bound_probe> instead of a VEC(bound_probe_s). This allows removing some cleanups. It also seems like enable_probes_command and disable_probes_command were not freeing that vector. The comparison function compare_probes needs to be updated to return a bool indicating whether the first parameter is "less than" the second parameter. I defined two constructors to bound_probe. The default constructor is needed, for example, so the instance in struct bp_location can be constructed without parameters. The constructor with parameters is useful so we can use emplace_back and pass the values directly. The s390 builder on the buildbot shows a weird failure that I can't explain: ../../binutils-gdb/gdb/elfread.c: In function void probe_key_free(bfd*, void*): ../../binutils-gdb/gdb/elfread.c:1346:8: error: types may not be defined in a for-range-declaration [-Werror] for (struct probe *probe : *probes) ^~~~~~ I guess it's a bug with that specific version< of the compiler, since no other gcc gives me that error. It is using: g++ (GCC) 6.3.1 20161221 (Red Hat 6.3.1-1) Any idea about this problem? gdb/ChangeLog: * probe.h (struct bound_probe): Define constructors. * probe.c (bound_probe_s): Remove typedef. (DEF_VEC_O (bound_probe_s)): Remove VEC. (collect_probes): Change return type to std::vector, remove cleanup. (compare_probes): Return bool, change parameter type. Change semantic to "less than". (gen_ui_out_table_header_info): Change parameter to std::vector and update. (exists_probe_with_pops): Likewise. (info_probes_for_ops): Update to std::vector change. (enable_probes_command): Likewise. (disable_probes_command): Likewise.
2017-09-12Make probe_ops::get_probes fill an std::vectorSimon Marchi1-1/+1
This patch changes one usage of VEC to std::vector. It is a relatively straightforward 1:1 change. The implementations of sym_probe_fns::sym_get_probes return a borrowed reference to their probe vectors, meaning that the caller should not free it. In the new code, I made them return a const reference to the vector. This patch and the following one were tested by the buildbot. I didn't see any failures that looked related to this one. gdb/ChangeLog: * probe.h (struct probe_ops) <get_probes>: Change parameter from vec to std::vector. * probe.c (parse_probes_in_pspace): Update. (find_probes_in_objfile): Update. (find_probe_by_pc): Update. (collect_probes): Update. (probe_any_get_probes): Update. * symfile.h (struct sym_probe_fns) <sym_get_probes> Change return type to reference to std::vector. * dtrace-probe.c (dtrace_process_dof_probe): Change parameter to std::vector and update. (dtrace_process_dof): Likewise. (dtrace_get_probes): Likewise. * elfread.c (elf_get_probes): Change return type to std::vector, store an std::vector in bfd_data. (probe_key_free): Update to std::vector. * stap-probe.c (handle_stap_probe): Change parameter to std::vector and update. (stap_get_probes): Likewise. * symfile-debug.c (debug_sym_get_probes): Change return type to std::vector and update.
2017-09-04struct symtabs_and_lines -> std::vector<symtab_and_line>Pedro Alves1-6/+8
This replaces "struct symtabs_and_lines" with std::vector<symtab_and_line> in most cases. This removes a number of cleanups. In some cases, the sals objects do not own the sals they point at. Instead they point at some sal that lives on the stack. Typically something like this: struct symtab_and_line sal; struct symtabs_and_lines sals; // fill in sal sals.nelts = 1; sals.sals = &sal; // use sals Instead of switching those cases to std::vector too, such usages are replaced by gdb::array_view<symtab_and_line> instead. This avoids introducing heap allocations. gdb/ChangeLog: 2017-09-04 Pedro Alves <palves@redhat.com> * ax-gdb.c (agent_command_1): Use range-for. * break-catch-throw.c (re_set_exception_catchpoint): Update. * breakpoint.c: Include "common/array-view.h". (init_breakpoint_sal, create_breakpoint_sal): Change sals parameter from struct symtabs_and_lines to array_view<symtab_and_line>. Adjust. Use range-for. Update. (breakpoint_sals_to_pc): Change sals parameter from struct symtabs_and_lines to std::vector reference. (check_fast_tracepoint_sals): Change sals parameter from struct symtabs_and_lines to std::array_view. Use range-for. (decode_static_tracepoint_spec): Return a std::vector instead of symtabs_and_lines. Update. (create_breakpoint): Update. (break_range_command, until_break_command, clear_command): Update. (base_breakpoint_decode_location, bkpt_decode_location) (bkpt_probe_create_sals_from_location) (bkpt_probe_decode_location, tracepoint_decode_location) (tracepoint_probe_decode_location) (strace_marker_create_sals_from_location): Return a std::vector instead of symtabs_and_lines. (strace_marker_create_breakpoints_sal): Update. (strace_marker_decode_location): Return a std::vector instead of symtabs_and_lines. Update. (update_breakpoint_locations): Change struct symtabs_and_lines parameters to gdb::array_view. Adjust. (location_to_sals): Return a std::vector instead of symtabs_and_lines. Update. (breakpoint_re_set_default): Use std::vector instead of struct symtabs_and_lines. (decode_location_default): Return a std::vector instead of symtabs_and_lines. Update. * breakpoint.h: Include "common/array-view.h". (struct breakpoint_ops) <decode_location>: Now returns a std::vector instead of returning a symtabs_and_lines via output parameter. (update_breakpoint_locations): Change sals parameters to use gdb::array_view. * cli/cli-cmds.c (edit_command, list_command): Update to use std::vector and gdb::array_view. (ambiguous_line_spec): Adjust to use gdb::array_view and range-for. (compare_symtabs): Rename to ... (cmp_symtabs): ... this. Change parameters to symtab_and_line const reference and adjust. (filter_sals): Rewrite using std::vector and standard algorithms. * elfread.c (elf_gnu_ifunc_resolver_return_stop): Simplify. (jump_command): Update to use std::vector. * linespec.c (struct linespec_state) <canonical_names>: Update comment. (add_sal_to_sals_basic): Delete. (add_sal_to_sals, filter_results, convert_results_to_lsals) (decode_line_2, create_sals_line_offset) (convert_address_location_to_sals, convert_linespec_to_sals) (convert_explicit_location_to_sals, parse_linespec) (event_location_to_sals, decode_line_full, decode_line_1) (decode_line_with_current_source) (decode_line_with_last_displayed, decode_objc) (decode_digits_list_mode, decode_digits_ordinary, minsym_found) (linespec_result::~linespec_result): Adjust to use std::vector instead of symtabs_and_lines. * linespec.h (linespec_sals::sals): Now a std::vector. (struct linespec_result): Use std::vector, bool, and in-class initialization. (decode_line_1, decode_line_with_current_source) (decode_line_with_last_displayed): Return std::vector. * macrocmd.c (info_macros_command): Use std::vector. * mi/mi-main.c (mi_cmd_trace_find): Use std::vector. * probe.c (parse_probes_in_pspace, parse_probes): Adjust to use std::vector. * probe.h (parse_probes): Return a std::vector. * python/python.c (gdbpy_decode_line): Use std::vector and gdb::array_view. * source.c (select_source_symtab, line_info): Use std::vector. * stack.c (func_command): Use std::vector. * symtab.h (struct symtabs_and_lines): Delete. * tracepoint.c (tfind_line_command, scope_info): Use std::vector.
2017-01-01update copyright year range in GDB filesJoel Brobecker1-1/+1
This applies the second part of GDB's End of Year Procedure, which updates the copyright year range in all of GDB's files. gdb/ChangeLog: Update copyright year range in all GDB files.
2016-01-19Limit breakpoint re-set to the current program spacePedro Alves1-0/+1
Currently, we always re-set all locations of all breakpoints. This commit makes us re-set only locations of the current program space. If we loaded symbols to a program space (e.g., "file" command or some shared library was loaded), GDB must run through all breakpoints and determine if any new locations need to be added to the breakpoint. However, there's no reason to recreate locations for _other_ program spaces, as those haven't changed. Similarly, when we create a new inferior, through e.g., a fork, GDB must run through all breakpoints and determine if any new locations need to be added to the breakpoint. There's no reason to destroy the locations of the parent inferior and other inferiors. We know those won't change. In addition to being inneficient, resetting breakpoints of inferiors that are currently running is problematic, because: - some targets can't read memory while the inferior is running. - the inferior might exit while we're re-setting its breakpoints, which may confuse prologue skipping. I went through all the places where we call breakpoint_re_set, and it seems to me that all can be changed to only re-set locations of the current program space. The patch that reversed threads order in "info threads" etc. happened to make gdb.threads/fork-plus-thread.exp expose this problem when testing on x86/-m32. The problem was latent and masked out by chance by the code-cache: https://sourceware.org/ml/gdb-patches/2016-01/msg00213.html Tested on x86-64 F20, native (-m64/-m32) and extended-remote gdbserver. Fixes the regression discussed in the url above with --target_board=unix/-m32: -FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited +PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: inferior 1 exited -FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left (timeout) -FAIL: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left (the program exited) +PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: no threads left +PASS: gdb.threads/fork-plus-threads.exp: detach-on-fork=off: only inferior 1 left gdb/ChangeLog: 2016-01-19 Pedro Alves <palves@redhat.com> * ax-gdb.c (agent_command_1): Adjust call to decode_line_full. * break-catch-throw.c (re_set_exception_catchpoint): Pass the current program space down to linespec decoding and breakpoint location updating. * breakpoint.c (parse_breakpoint_sals): Adjust calls to decode_line_full. (until_break_command): Adjust calls to decode_line_1. (base_breakpoint_decode_location, bkpt_decode_location): Add 'search_pspace' parameter. Pass it along. (bkpt_probe_create_sals_from_location): Adjust calls to parse_probes. (tracepoint_decode_location, tracepoint_probe_decode_location) (strace_marker_decode_location): Add 'search_pspace' parameter. Pass it along. (all_locations_are_pending): Rewrite to take a breakpoint and program space as arguments instead. (hoist_existing_locations): New function. (update_breakpoint_locations): Add 'filter_pspace' parameter. Use hoist_existing_locations instead of always removing all locations, and adjust to all_locations_are_pending change. (location_to_sals): Add 'search_pspace' parameter. Pass it along. Don't disable the breakpoint if there are other locations in another program space. (breakpoint_re_set_default): Adjust to pass down the current program space as filter program space. (decode_location_default): Add 'search_pspace' parameter and pass it along. (prepare_re_set_context): Don't switch program space here. (breakpoint_re_set): Use save_current_space_and_thread instead of save_current_program_space. * breakpoint.h (struct breakpoint_ops) <decode_location>: Add 'search_pspace' parameter. (update_breakpoint_locations): Add 'filter_pspace' parameter. * cli/cli-cmds.c (edit_command, list_command): Adjust calls to decode_line_1. * elfread.c (elf_gnu_ifunc_resolver_return_stop): Pass the current program space as filter program space. * linespec.c (struct linespec_state) <search_pspace>: New field. (create_sals_line_offset, convert_explicit_location_to_sals) (parse_linespec): Pass the search program space down. (linespec_state_constructor): Add 'search_pspace' parameter. Store it. (linespec_parser_new): Add 'search_pspace' parameter and pass it along. (linespec_lex_to_end): Adjust. (decode_line_full, decode_line_1): Add 'search_pspace' parameter and pass it along. (decode_line_with_last_displayed): Adjust. (collect_symtabs_from_filename, symtabs_from_filename): New 'search_pspace' parameter. Use it. (find_function_symbols): Pass the search program space down. * linespec.h (decode_line_1, decode_line_full): Add 'search_pspace' parameter. * probe.c (parse_probes_in_pspace): New function, factored out from ... (parse_probes): ... this. Add 'search_pspace' parameter and use it. * probe.h (parse_probes): Add pspace' parameter. * python/python.c (gdbpy_decode_line): Adjust. * tracepoint.c (scope_info): Adjust.
2016-01-01GDB copyright headers update after running GDB's copyright.py script.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2015-09-02Improve error reporting when handling SystemTap SDT probesSergio Durigan Junior1-6/+14
This patch improves the error reporting when handling SystemTap SDT probes. "Handling", in this case, mostly means "parsing". On gdb/probe.h, only trivial changes on functions' comments in order to explicitly mention that some of them can throw exceptions. This is just to make the API a bit more clear. On gdb/stap-probe.c, I have s/internal_error/error/ on two functions that are responsible for parsing specific bits of the probes' arguments: stap_get_opcode and stap_get_expected_argument_type. It is not correct to call internal_error on such situations because it is not really GDB's fault if the probes have malformed arguments. I also improved the error reported on stap_get_expected_argument_type by also including the probe name on it. Aside from that, and perhaps most importantly, I added a check on stap_get_arg to make sure that we don't try to extract an argument from a probe that has no arguments. This check issues an internal_error, because it really means that GDB is doing something it shouldn't. Although it can be considered almost trivial, and despite the fact that I am the maintainer for this part of the code, I am posting this patch for review. I will wait a few days, and if nobody has anything to say, I will go ahead and push it. gdb/ChangeLog: 2015-09-01 Sergio Durigan Junior <sergiodj@redhat.com> * probe.h (struct probe_ops) <get_probe_argument_count, evaluate_probe_argument, enable_probe, disable_probe>: Mention in the comment that the function can throw an exception. (get_probe_argument_count): Likewise. (evaluate_probe_argument): Likewise. * stap-probe.c (stap_get_opcode): Call error instead of internal_error. (stap_get_expected_argument_type): Likewise. Add argument 'probe'. Improve error message by mentioning the probe's name. (stap_parse_probe_arguments): Adjust call to stap_get_expected_argument_type. (stap_get_arg): Add comment. Assert that 'probe->args_parsed' is not zero. Call internal_error if GDB requests an argument but the probe has no arguments.
2015-08-11Explicit locations: use new location APIKeith Seitz1-2/+4
This patch converts the code base to use the new struct event_location API being introduced. This patch preserves the current functionality and adds no new features. The "big picture" API usage introduced by this patch may be illustrated with a simple exmaple. Where previously developers would write: void my_command (char *arg, int from_tty) { create_breakpoint (..., arg, ...); ... } one now uses: void my_command (char *arg, int from_tty) { struct event_locaiton *location; struct cleanup *back_to; location = string_to_event_locaiton (&arg, ...); back_to = make_cleanup_delete_event_location (location); create_breakpoint (..., location, ...); do_cleanups (back_to); } Linespec-decoding functions (now called location-decoding) such as decode_line_full no longer skip argument pointers over processed input. That functionality has been moved into string_to_event_location as demonstrated above. gdb/ChangeLog * ax-gdb.c: Include location.h. (agent_command_1) Use linespec location instead of address string. * break-catch-throw.c: Include location.h. (re_set_exception_catchpoint): Use linespec locations instead of address strings. * breakpoint.c: Include location.h. (create_overlay_event_breakpoint, create_longjmp_master_breakpoint) (create_std_terminate_master_breakpoint) (create_exception_master_breakpoint, update_breakpoints_after_exec): Use linespec location instead of address string. (print_breakpoint_location): Use locations and event_location_to_string. Print extra_string for pending locations for non-MI streams. (print_one_breakpoint_location): Use locations and event_location_to_string. (init_raw_breakpoint_without_location): Initialize b->location. (create_thread_event_breakpoint): Use linespec location instead of address string. (init_breakpoint_sal): Likewise. Only save extra_string if it is non-NULL and not the empty string. Use event_location_to_string instead of `addr_string'. Constify `p' and `endp'. Use skip_spaces_const/skip_space_const instead of non-const versions. Copy the location into the breakpoint. If LOCATION is NULL, save the breakpoint address as a linespec location instead of an address string. (create_breakpoint_sal): Change `addr_string' parameter to a struct event_location. All uses updated. (create_breakpoints_sal): Likewise for local variable `addr_string'. (parse_breakpoint_sals): Use locations instead of address strings. Remove check for empty linespec with conditional. Refactor. (decode_static_tracepoint_spec): Make argument const and update function. (create_breakpoint): Change `arg' to a struct event_location and rename. Remove `copy_arg' and `addr_start'. If EXTRA_STRING is empty, set it to NULL. Don't populate `canonical' for pending breakpoints. Pass `extra_string' to find_condition_and_thread. Clear `extra_string' if `rest' was NULL. Do not error with "garbage after location" if setting a dprintf breakpoint. Copy the location into the breakpoint instead of an address string. (break_command_1): Use string_to_event_location and pass this to create_breakpoint instead of an address string. Check against `arg_cp' for a probe linespec. (dprintf_command): Use string_to_event_location and pass this to create_breakpoint instead of an address string. Throw an exception if no format string was specified. (print_recreate_ranged_breakpoint): Use event_location_to_string instead of address strings. (break_range_command, until_break_command) (init_ada_exception_breakpoint): Use locations instead of address strings. (say_where): Print out extra_string for pending locations. (base_breakpoint_dtor): Delete `location' and `location_range_end' of the breakpoint. (base_breakpoint_create_sals_from_location): Use struct event_location instead of address string. Remove `addr_start' and `copy_arg' parameters. (base_breakpoint_decode_location): Use struct event_location instead of address string. (bkpt_re_set): Use locations instead of address strings. Use event_location_empty_p to check for unset location. (bkpt_print_recreate): Use event_location_to_string instead of an address string. Print out extra_string for pending locations. (bkpt_create_sals_from_location, bkpt_decode_location) (bkpt_probe_create_sals_from_location): Use struct event_location instead of address string. (bkpt_probe_decode_location): Use struct event_location instead of address string. (tracepoint_print_recreate): Use event_location_to_string to recreate the tracepoint. (tracepoint_create_sals_from_location, tracepoint_decode_location) (tracepoint_probe_create_sals_from_location) (tracepoint_probe_decode_location): Use struct event_location instead of address string. (dprintf_print_recreate): Use event_location_to_string to recreate the dprintf. (dprintf_re_set): Remove check for valid/missing format string. (strace_marker_create_sals_from_location) (strace_marker_create_breakpoints_sal, strace_marker_decode_location) (update_static_tracepoint): Use struct event_location instead of address string. (location_to_sals): Likewise. Pass `extra_string' to find_condition_and_thread. For newly resolved pending breakpoint locations, clear the location's string representation. Assert that the breakpoint's condition string is NULL when condition_not_parsed. (breakpoint_re_set_default, create_sals_from_location_default) (decode_location_default, trace_command, ftrace_command) (strace_command, create_tracepoint_from_upload): Use locations instead of address strings. * breakpoint.h (struct breakpoint_ops) <create_sals_from_location>: Use struct event_location instead of address string. Update all uses. <decode_location>: Likewise. (struct breakpoint) <addr_string>: Change to struct event_location and rename `location'. <addr_string_range_end>: Change to struct event_location and rename `location_range_end'. (create_breakpoint): Use struct event_location instead of address string. * cli/cli-cmds.c: Include location.h. (edit_command, list_command): Use locations instead of address strings. * elfread.c: Include location.h. (elf_gnu_ifunc_resolver_return_stop): Use event_location_to_string. * guile/scm-breakpoint.c: Include location.h. (bpscm_print_breakpoint_smob): Use event_location_to_string. (gdbscm_register_breakpoint): Use locations instead of address strings. * linespec.c: Include location.h. (struct ls_parser) <stream>: Change to const char *. (PARSER_STREAM): Update. (lionespec_lexer_lex_keyword): According to find_condition_and_thread, keywords must be followed by whitespace. (canonicalize_linespec): Save a linespec location into `canonical'. Save a canonical linespec into `canonical'. (parse_linespec): Change `argptr' to const char * and rename `arg'. All uses updated. Update function description. (linespec_parser_new): Initialize `parser'. Update initialization of parsing stream. (event_location_to_sals): New function. (decode_line_full): Change `argptr' to a struct event_location and rename it `location'. Use locations instead of address strings. Call event_location_to_sals instead of parse_linespec. (decode_line_1): Likewise. (decode_line_with_current_source, decode_line_with_last_displayed) Use locations instead of address strings. (decode_objc): Likewise. Change `argptr' to const char * and rename `arg'. (destroy_linespec_result): Delete the linespec result's location instead of freeing the address string. * linespec.h (struct linespec_result) <addr_string>: Change to struct event_location and rename to ... <location>: ... this. (decode_line_1, decode_line_full): Change `argptr' to struct event_location. All callers updated. * mi/mi-cmd-break.c: Include language.h, location.h, and linespec.h. (mi_cmd_break_insert_1): Use locations instead of address strings. Throw an error if there was "garbage" at the end of the specified linespec. * probe.c: Include location.h. (parse_probes): Change `argptr' to struct event_location. Use event locations instead of address strings. * probe.h (parse_probes): Change `argptr' to struct event_location. * python/py-breakpoint.c: Include location.h. (bppy_get_location): Constify local variable `str'. Use event_location_to_string. (bppy_init): Use locations instead of address strings. * python/py-finishbreakpoint.c: Include location.h. (bpfinishpy_init): Remove local variable `addr_str'. Use locations instead of address strings. * python/python.c: Include location.h. (gdbpy_decode_line): Use locations instead of address strings. * remote.c: Include location.h. (remote_download_tracepoint): Use locations instead of address strings. * spu-tdep.c: Include location.h. (spu_catch_start): Remove local variable `buf'. Use locations instead of address strings. * tracepoint.c: Include location.h. (scope_info): Use locations instead of address strings. (encode_source_string): Constify parameter `src'. * tracepoint.h (encode_source_string): Likewise. gdb/testsuite/ChangeLog * gdb.base/dprintf-pending.exp: Update dprintf "without format" test. Add tests for missing ",FMT" and ",".
2015-02-17New commands `enable probe' and `disable probe'.Jose E. Marchesi1-0/+12
This patch adds the above-mentioned commands to the generic probe abstraction implemented in probe.[ch]. The effects associated to enabling or disabling a probe depend on the type of probe being handled, and is triggered by invoking two back-end hooks in `probe_ops'. In case some particular probe type does not support the notion of enabling and/or disabling, the corresponding fields on `probe_ops' can be initialized to NULL. This is the case of SystemTap probes. gdb/ChangeLog: 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com> * stap-probe.c (stap_probe_ops): Add NULLs in the static stap_probe_ops for `enable_probe' and `disable_probe'. * probe.c (enable_probes_command): New function. (disable_probes_command): Likewise. (_initialize_probe): Define the cli commands `enable probe' and `disable probe'. (parse_probe_linespec): New function. (info_probes_for_ops): Use parse_probe_linespec. * probe.h (probe_ops): New hooks `enable_probe' and `disable_probe'. gdb/doc/ChangeLog: 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com> * gdb.texinfo (Static Probe Points): Cover the `enable probe' and `disable probe' commands.
2015-02-17Adapt `info probes' to support printing probes of different types.Jose E. Marchesi1-0/+6
A "probe type" (backend for the probe abstraction implemented in probe.[ch]) can extend the information printed by `info probes' by defining additional columns. This means that when `info probes' is used to print all the probes regardless of their types, some of the columns will be "not applicable" to some of the probes (like, say, the Semaphore column only makes sense for SystemTap probes). This patch makes `info probes' fill these slots with "n/a" marks (currently it breaks the table) and not include headers for which no actual probe has been found in the list of defined probes. This patch also adds support for a new generic column "Type", that displays the type of each probe. SystemTap probes identify themselves as "stap" probes. gdb/ChangeLog: 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com> * probe.c (print_ui_out_not_applicables): New function. (exists_probe_with_pops): Likewise. (info_probes_for_ops): Do not include column headers for probe types for which no probe has been actually found on any object. Also invoke `print_ui_out_not_applicables' in order to match the column rows with the header when probes of several types are listed. Print the "Type" column. * probe.h (probe_ops): Added a new probe operation `type_name'. * stap-probe.c (stap_probe_ops): Add `stap_type_name'. (stap_type_name): New function.
2015-01-01Update year range in copyright notice of all files owned by the GDB project.Joel Brobecker1-1/+1
gdb/ChangeLog: Update year range in copyright notice of all files.
2014-10-14Only call {set,clear}_semaphore probe function if they are not NULLSergio Durigan Junior1-2/+2
This patch is a response to what I commented on: <https://sourceware.org/ml/gdb-patches/2014-10/msg00046.html> When reviewing Jose's USDT probe support patches. Basically, in his patch he had to create dummy functions for the set_semaphore and the clear_semaphore methods of probe_ops (gdb/probe.h), because those functions were called inconditionally from inside gdb/breakpoint.c and gdb/tracepoint.c. However, the semaphore concept may not apply to all types of probes, and this is the case here: USDT probes do not have semaphores (although SDT probes do). Anyway, this is a simple (almost obvious) patch to guard the call to {set,clear}_semaphore. It does not introduce any regression on a Fedora 20 x86_64. I will apply it in a few days in case there is no comment. gdb/ChangeLog: 2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com> * breakpoint.c (bkpt_probe_insert_location): Call set_semaphore only if it is not NULL. (bkpt_probe_remove_location): Likewise, for clear_semaphore. * probe.h (struct probe_ops) <set_semaphore>: Update comment. (struct probe_ops) <clear_semaphore>: Likewise. * tracepoint.c (start_tracing): Call set_semaphore only if it is not NULL. (stop_tracing): Likewise, for clear_semaphore.
2014-06-18constify probe.c functionTom Tromey1-1/+1
This constifies an argument to info_probes_for_ops. 2014-06-18 Tom Tromey <tromey@redhat.com> * probe.c (info_probes_for_ops): Make "arg" const. * probe.h (info_probes_for_ops): Update.
2014-03-03change probes to be program-space-independentTom Tromey1-12/+37
This changes the probes to be independent of the program space. After this, when a probe's address is needed, it is determined by applying offsets at the point of use. This introduces a bound_probe object, similar to bound minimal symbols. Objects of this type are used when it's necessary to pass a probe and its corresponding objfile. This removes the backlink from probe to objfile, which was primarily used to fetch the architecture to use. This adds a get_probe_address function which calls a probe method to compute the probe's relocated address. Similarly, it adds an objfile parameter to the semaphore methods so they can do the relocation properly as well. 2014-03-03 Tom Tromey <tromey@redhat.com> * break-catch-throw.c (fetch_probe_arguments): Use bound probes. * breakpoint.c (create_longjmp_master_breakpoint): Use get_probe_address. (add_location_to_breakpoint, bkpt_probe_insert_location) (bkpt_probe_remove_location): Update. * breakpoint.h (struct bp_location) <probe>: Now a bound_probe. * elfread.c (elf_symfile_relocate_probe): Remove. (elf_probe_fns): Update. (insert_exception_resume_breakpoint): Change type of "probe" parameter to bound_probe. (check_exception_resume): Update. * objfiles.c (objfile_relocate1): Don't relocate probes. * probe.c (bound_probe_s): New typedef. (parse_probes): Use get_probe_address. Set sal's objfile. (find_probe_by_pc): Return a bound_probe. (collect_probes): Return a VEC(bound_probe_s). (compare_probes): Update. (gen_ui_out_table_header_info): Change type of "probes" parameter. Update. (info_probes_for_ops): Update. (get_probe_address): New function. (probe_safe_evaluate_at_pc): Update. * probe.h (struct probe_ops) <get_probe_address>: New field. <set_semaphore, clear_semaphore>: Add objfile parameter. (struct probe) <objfile>: Remove field. <arch>: New field. <address>: Update comment. (struct bound_probe): New. (find_probe_by_pc): Return a bound_probe. (get_probe_address): Declare. * solib-svr4.c (struct probe_and_action) <address>: New field. (hash_probe_and_action, equal_probe_and_action): Update. (register_solib_event_probe): Add address parameter. (solib_event_probe_at): Update. (svr4_create_probe_breakpoints): Add objfile parameter. Use get_probe_address. * stap-probe.c (struct stap_probe) <sem_addr>: Update comment. (stap_get_probe_address): New function. (stap_can_evaluate_probe_arguments, compute_probe_arg) (compile_probe_arg): Update. (stap_set_semaphore, stap_clear_semaphore): Compute semaphore's address. (handle_stap_probe): Don't relocate the probe. (stap_relocate): Remove. (stap_gen_info_probes_table_values): Update. (stap_probe_ops): Remove stap_relocate. * symfile-debug.c (debug_sym_relocate_probe): Remove. (debug_sym_probe_fns): Update. * symfile.h (struct sym_probe_fns) <sym_relocate_probe>: Remove. * symtab.c (init_sal): Use memset. * symtab.h (struct symtab_and_line) <objfile>: New field. * tracepoint.c (start_tracing, stop_tracing): Update.
2014-03-03comment fixesTom Tromey1-7/+6
This fixes up a few mildly erroneous comments in probe.h. 2014-03-03 Tom Tromey <tromey@redhat.com> * probe.h (parse_probes, find_probe_by_pc) (find_probes_in_objfile): Fix comments.
2014-01-01Update Copyright year range in all files maintained by GDB.Joel Brobecker1-1/+1
2013-12-10Sanitize access to gdbarch on the SDT probe API (and fix ARM bug)Sergio Durigan Junior1-4/+8
This patch sanitizes the access to gdbarch made by various functions of the SDT probe API. Before this patch, gdbarch was being accessed via the probe's objfile; however, this proved to cause a bug on 32-bit ARM targets because during the parsing of the probe's arguments the code needed to access some pseudo-registers of the architecture, and this information is not fully correct on the objfile's gdbarch. Basically, the approach taken was to instead pass the current/selected frame to the parsing and evaluation functions, so that they can extract the gdbarch directly from the frame. It solved the ARM bug reported above, and also contributed to make the API cleaner. Tested on x86_64 and 32-bit ARM. 2013-12-11 Sergio Durigan Junior <sergiodj@redhat.com> * break-catch-throw.c (fetch_probe_arguments): Pass selected frame to get_probe_argument_count and evaluate_probe_argument. * probe.c (get_probe_argument_count): Adjust declaration to accept frame. Pass frame to probe_ops's get_probe_argument_count. (evaluate_probe_argument): Likewise, for evaluate_probe_argument. (probe_safe_evaluate_at_pc): Pass frame to get_probe_argument_count and evaluate_probe_argument. * probe.h (struct probe_ops) <get_probe_argument_count, evaluate_probe_argument>: Adjust declarations to accept frame. (get_probe_argument_count, evaluate_probe_argument): Likewise. * solib-svr4.c (solib_event_probe_action): Get current frame. Pass it to get_probe_argument_count. (svr4_handle_solib_event): Get current frame. Pass it to get_probe_argument_count and evaluate_probe_argument. * stap-probe.c (stap_parse_probe_arguments): Adjust declaration to accept gdbarch. Do not obtain it from the probe's objfile. (stap_get_probe_argument_count): Adjust declaration to accept frame. Obtain gdbarch from the frame. Call generic can_evaluate_probe_arguments. Pass gdbarch to stap_parse_probe_arguments. (stap_get_arg): Adjust declaration to accept gdbarch. Pass it to stap_parse_probe_arguments. (stap_evaluate_probe_argument): Adjust declaration to accept frame. Obtain gdbarch from the frame. Pass gdbarch to stap_get_arg. (stap_compile_to_ax): Pass agent_expr's gdbarch to stap_get_arg. (compute_probe_arg): Obtain gdbarch from frame. Pass frame to get_probe_argument_count and evaluate_probe_argument.
2013-07-242013-07-24 Sergio Durigan Junior <sergiodj@redhat.com>Sergio Durigan Junior1-0/+12
* breakpoint.c (create_longjmp_master_breakpoint): Check if probe interface can evaluate arguments. Fallback to the old mode if it cannot. (create_exception_master_breakpoint): Likewise. * elfread.c (elf_can_evaluate_probe_arguments): New function. (struct sym_probe_fns elf_probe_fns): Export function above to the probe interface. * probe.c (can_evaluate_probe_arguments): New function. * probe.h (struct probe_ops) <can_evaluate_probe_arguments>: New function pointer. (can_evaluate_probe_arguments): New function prototype. * solib-svr4.c (svr4_create_solib_event_breakpoints): Check if probe interface can evaluate arguments. Fallback to the old mode if it cannot. * stap-probe.c (stap_get_probe_argument_count): Check if probe interface can evaluate arguments. Warning the user if it cannot. (stap_can_evaluate_probe_arguments): New function. (struct probe_ops stap_probe_ops): Export function above to the probe interface. * symfile.h (struct sym_probe_fns) <can_evaluate_probe_arguments>: New function pointer.
2013-06-042013-06-04 Gary Benson <gbenson@redhat.com>Gary Benson1-0/+10
* probe.h (get_probe_argument_count): New declaration. (evaluate_probe_argument): Likewise. * probe.c (get_probe_argument_count): New function. (evaluate_probe_argument): Likewise. (probe_safe_evaluate_at_pc): Use the above new functions.
2013-01-01Update years in copyright notice for the GDB files.Joel Brobecker1-1/+1
Two modifications: 1. The addition of 2013 to the copyright year range for every file; 2. The use of a single year range, instead of potentially multiple year ranges, as approved by the FSF.
2012-07-18 * common/gdb_vecs.h: Moved here from ./gdb_vecs.h.Doug Evans1-0/+5
* common/gdb_vecs.c: New file, contents from utils.c. * common/host-defs.h: New file, contents from defs.h. * utils.h: New file, contents from defs.h. * defs.h: Move all declarations of objects defined in utils.c to utils.h (except QUIT() and related). #include "utils.h", "host-defs.h". * probe.h (probe_p): Move here from gdb_vecs.h. * symfile.c: #include "probe.h" instead of "gdb_vecs.h". * utils.c (free_char_ptr_vec): Moved to common/gdb_vecs.c. (dirnames_to_char_ptr_vec_append, dirnames_to_char_ptr_vec): Ditto. * Makefile.in (SFILES): Add common/gdb_vecs.c. (HFILES_NO_SRCDIR): Add common/gdb_vecs.h, common/host-defs.h, utils.h. (COMMON_OBS): Add gdb_vecs.o. (gdb_vecs.o): New rule.
2012-07-182012-07-18 Sergio Durigan Junior <sergiodj@redhat.com>Sergio Durigan Junior1-12/+11
* elfread.c (elf_get_probe_argument_count): Remove `objfile' argument. (elf_compile_to_ax): Likewise. * infrun.c (insert_exception_resume_from_probe): Likewise. (check_exception_resume): Remove `objfile' variable. * probe.c (find_probe_by_pc): Remove `objfile' argument. (struct probe_and_objfile, probe_and_objfile_s): Delete. (collect_probes): Adjust return value to `VEC (probe_p) *'. (compare_entries): Rename to... (compare_probes): ...this. Adjust function to work with `struct probe *'. Rename variables `ea' and `eb' to `pa' and `pb' respectively. (gen_ui_out_table_header_info): Adjust `probes' argument to be `VEC (probe_p) *'. (print_ui_out_info): Adjust argument to be `struct probe *'. (info_probes_for_ops): Adjust internal computations to use `VEC (probe_p) *'. (probe_safe_evaluate_at_pc): Refactor to not pass `objfile' anymore. * probe.h (struct probe_ops) <get_probe_argument_count, compile_to_ax, gen_info_probes_table_values>: Remove `objfile' argument. (struct probe) <objfile>: New field. (find_probe_by_pc): Remove `objfile' argument. * stap-probe.c (stap_parse_probe_arguments): Likewise. (stap_get_probe_argument_count): Likewise. (stap_get_arg): Likewise. (stap_evaluate_probe_argument): Likewise. (stap_compile_to_ax): Likewise. (compile_probe_arg): Refactor not to pass `objfile' anymore. (handle_stap_probe): Fill `objfile' field from `struct probe'. (stap_gen_info_probes_table_header): Remove `objfile' argument. * symfile.h (struct sym_probe_fns) <sym_evaluate_probe_argument, sym_compile_to_ax>: Likewise.
2012-04-272012-04-27 Sergio Durigan Junior <sergiodj@redhat.com>Sergio Durigan Junior1-0/+221
Tom Tromey <tromey@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> * Makefile.in (SFILES): Add `probe' and `stap-probe'. (COMMON_OBS): Likewise. (HFILES_NO_SRCDIR): Add `probe'. * NEWS: Mention support for static and SystemTap probes. * amd64-tdep.c (amd64_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * arm-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (arm_stap_is_single_operand): New function. (arm_stap_parse_special_token): Likewise. (arm_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * ax-gdb.c (require_rvalue): Removing static declaration. (gen_expr): Likewise. * ax-gdb.h (gen_expr): Declaring function. (require_rvalue): Likewise. * breakpoint.c: Include `gdb_regex.h' and `probe.h'. (bkpt_probe_breakpoint_ops): New variable. (momentary_breakpoint_from_master): Set the `probe' value. (add_location_to_breakpoint): Likewise. (break_command_1): Using proper breakpoint_ops according to the argument passed by the user in the command line. (bkpt_probe_insert_location): New function. (bkpt_probe_remove_location): Likewise. (bkpt_probe_create_sals_from_address): Likewise. (bkpt_probe_decode_linespec): Likewise. (tracepoint_probe_create_sals_from_address): Likewise. (tracepoint_probe_decode_linespec): Likewise. (tracepoint_probe_breakpoint_ops): New variable. (trace_command): Using proper breakpoint_ops according to the argument passed by the user in the command line. (initialize_breakpoint_ops): Initializing breakpoint_ops for static probes on breakpoints and tracepoints. * breakpoint.h (struct bp_location) <probe>: New field. * cli-utils.c (skip_spaces_const): New function. (extract_arg): Likewise. * cli-utils.h (skip_spaces_const): Likewise. (extract_arg): Likewise. * coffread.c (coff_sym_fns): Add `sym_probe_fns' value. * configure.ac: Append `stap-probe.o' to be generated when ELF support is present. * configure: Regenerate. * dbxread.c (aout_sym_fns): Add `sym_probe_fns' value. * elfread.c: Include `probe.h' and `arch-utils.h'. (probe_key): New variable. (elf_get_probes): New function. (elf_get_probe_argument_count): Likewise. (elf_evaluate_probe_argument): Likewise. (elf_compile_to_ax): Likewise. (elf_symfile_relocate_probe): Likewise. (stap_probe_key_free): Likewise. (elf_probe_fns): New variable. (elf_sym_fns): Add `sym_probe_fns' value. (elf_sym_fns_lazy_psyms): Likewise. (elf_sym_fns_gdb_index): Likewise. (_initialize_elfread): Initialize objfile cache for static probes. * gdb_vecs.h (struct probe): New forward declaration. (probe_p): New VEC declaration. * gdbarch.c: Regenerate. * gdbarch.h: Regenerate. * gdbarch.sh (stap_integer_prefix): New variable. (stap_integer_suffix): Likewise. (stap_register_prefix): Likewise. (stap_register_suffix): Likewise. (stap_register_indirection_prefix): Likewise. (stap_register_indirection_suffix): Likewise. (stap_gdb_register_prefix): Likewise. (stap_gdb_register_suffix): Likewise. (stap_is_single_operand): New function. (stap_parse_special_token): Likewise. (struct stap_parse_info): Forward declaration. * i386-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. (i386_elf_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * i386-tdep.h (i386_stap_is_single_operand): New function. (i386_stap_parse_special_token): Likewise. * machoread.c (macho_sym_fns): Add `sym_probe_fns' value. * mipsread.c (ecoff_sym_fns): Likewise. * objfiles.c (objfile_relocate1): Support relocation for static probes. * parse.c (prefixify_expression): Remove static declaration. (initialize_expout): Likewise. (reallocate_expout): Likewise. * parser-defs.h (initialize_expout): Declare function. (reallocate_expout): Likewise. (prefixify_expression): Likewise. * ppc-linux-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (ppc_stap_is_single_operand): New function. (ppc_stap_parse_special_token): Likewise. (ppc_linux_init_abi): Initializing proper fields used by SystemTap probes' arguments parser. * probe.c: New file, for generic statically defined probe support. * probe.h: Likewise. * s390-tdep.c: Including headers needed to perform the parsing of SystemTap probes' arguments. (s390_stap_is_single_operand): New function. (s390_gdbarch_init): Initializing proper fields used by SystemTap probes' arguments parser. * somread.c (som_sym_fns): Add `sym_probe_fns' value. * stap-probe.c: New file, for SystemTap probe support. * stap-probe.h: Likewise. * symfile.h: Include `gdb_vecs.h'. (struct sym_probe_fns): New struct. (struct sym_fns) <sym_probe_fns>: New field. * symtab.c (init_sal): Initialize `probe' field. * symtab.h (struct probe): Forward declaration. (struct symtab_and_line) <probe>: New field. * tracepoint.c (start_tracing): Adjust semaphore on breakpoints locations. (stop_tracing): Likewise. * xcoffread.c (xcoff_sym_fns): Add `sym_probe_fns' value.