aboutsummaryrefslogtreecommitdiff
path: root/gas
AgeCommit message (Collapse)AuthorFilesLines
2017-12-13This patch enables disassembler_needs_relocs for PRU. It is needed to print ↵Dimitar Dimitrov3-0/+21
correct symbols when disassembling arguments of "call" instructions with a relocation. opcodes * disassemble.c: Enable disassembler_needs_relocs for PRU. gas * testsuite/gas/pru/extern.s: New test for print of U16_PMEMM relocation. * testsuite/gas/pru/extern.d: New test driver.
2017-12-12Don't mask X_add_number containing a register numberAlan Modra2-1/+6
It's obviously wrong to mask SPRs to 8 bits. PR 21118 * config/tc-ppc.c (md_assemble): Don't mask register number.
2017-12-08gas: xtensa: fix comparison of trampoline chain symbolsMax Filippov2-4/+28
Don't use address where symbol gets resolved, as during section relaxation symbols will slide, instead canonicalize symbols and check that they are are the same. This fixes a bug when a relaxed jump goes into the wrong trampoline. gas/ 2017-12-07 Max Filippov <jcmvbkbc@gmail.com> * config/tc-xtensa.c (xg_order_trampoline_chain): Replace xg_order_trampoline_chain_entry call with check for canonicalized symbol equality and offset equality.
2017-12-04Documentation fixAlan Modra2-1/+6
PR 22544 * doc/as.texinfo (8byte): Correct.
2017-12-04Run powerpc vle gas tests for all powerpc ELF targetsAlan Modra19-39/+58
* testsuite/gas/ppc/ppc.exp: Don't exclude VLE tests when little-endian. * testsuite/gas/ppc/efs.d: Add -mbig to assembler options. * testsuite/gas/ppc/efs2.d: Likewise. * testsuite/gas/ppc/lsp-checks.d: Likewise. * testsuite/gas/ppc/lsp.d: Likewise. * testsuite/gas/ppc/spe.d: Likewise. * testsuite/gas/ppc/spe2-checks.d: Likewise. * testsuite/gas/ppc/spe2.d: Likewise. * testsuite/gas/ppc/spe_ambiguous.d: Likewise. * testsuite/gas/ppc/vle-mult-ld-st-insns.d: Likewise. * testsuite/gas/ppc/vle-reloc.d: Likewise. * testsuite/gas/ppc/vle-simple-1.d: Likewise. * testsuite/gas/ppc/vle-simple-2.d: Likewise. * testsuite/gas/ppc/vle-simple-3.d: Likewise. * testsuite/gas/ppc/vle-simple-4.d: Likewise. * testsuite/gas/ppc/vle-simple-5.d: Likewise. * testsuite/gas/ppc/vle-simple-6.d: Likewise. * testsuite/gas/ppc/vle.d: Likewise.
2017-12-03Fix for texinfo 4.8.Jim Wilson2-2/+6
gas/ * doc/c-riscv.texi (RISC-V-Directives): Move @section immediately after @node.
2017-12-01Update and clean up RISC-V gas documentation.Jim Wilson3-19/+134
gas/ * doc/as.texinfo (RISC-V): Alphabetize RISC-V entries. Change RISC-V-Opts to RISC-V-Options. Delete redundant space. Add -fpic and related options to option list. * doc/c-riscv.texi: (RISC-V-Options): Renamed from RISC-V-Opts. (RISC-V Options): Renamed from Options. Add missing period. (-fpic): Also mention -fPIC. (RISC-V Directives): New node.
2017-12-01Use consistent types for holding instructions, instruction masks, etc.Peter Bergner2-32/+44
include/ * opcode/ppc.h (PPC_INT_FMT): Define. (struct powerpc_opcode) <opcode>: Update type. (struct powerpc_opcode) <mask>: Likewise. (struct powerpc_opcode) <bitm>: Likewise. (struct powerpc_opcode) <insert>: Likewise. (struct powerpc_opcode) <extract>: Likewise. (ppc_optional_operand_value): Likewise. gas/ * config/tc-ppc.c (last_insn): Update type. (insn_validate) <omask, mask>: Likewise. (ppc_setup_opcodes) <mask, right_bit>: Likewise. <PRINT_OPCODE_TABLE>: Update types and printf format specifiers. (ppc_insert_operand): Update return and argument types and remove unneeded type casts. <min, max, right, tmp>: Update type. (md_assemble): Remove unneeded type casts. <insn, val, tmp_insn>: Update type. opcodes/ * opcodes/ppc-dis.c (disassemble_init_powerpc): Fix white space. (operand_value_powerpc): Update return and argument type. <value, top>: Update type. (skip_optional_operands): Update argument type. (lookup_powerpc): Likewise. (lookup_vle): Likewise. <table_opcd, table_mask, insn2>: Update type. (lookup_spe2): Update argument type. <table_opcd, table_mask, insn2>: Update type. (print_insn_powerpc) <insn, value>: Update type. Use PPC_INT_FMT for printing instructions and operands. * opcodes/ppc-opc.c (insert_arx, extract_arx, insert_ary, extract_ary, insert_rx, extract_rx, insert_ry, extract_ry, insert_bat, extract_bat, insert_bba, extract_bba, insert_bdm, extract_bdm, insert_bdp, extract_bdp, valid_bo_pre_v2, valid_bo_post_v2, valid_bo, insert_bo, extract_bo, insert_boe, extract_boe, insert_dcmxs, extract_dcmxs, insert_dxd, extract_dxd, insert_dxdn, extract_dxdn, insert_fxm, extract_fxm, insert_li20, extract_li20, insert_ls, extract_ls, insert_esync, extract_esync, insert_mbe, extract_mbe, insert_mb6, extract_mb6, extract_nb, insert_nbi, insert_nsi, extract_nsi, insert_ral, extract_ral, insert_ram, extract_ram, insert_raq, extract_raq, insert_ras, extract_ras, insert_rbs, extract_rbs, insert_rbx, extract_rbx, insert_sci8, extract_sci8, insert_sci8n, extract_sci8n, insert_sd4h, extract_sd4h, insert_sd4w, extract_sd4w, insert_oimm, extract_oimm, insert_sh6, extract_sh6, insert_spr, extract_spr, insert_sprg, extract_sprg, insert_tbr, extract_tbr, insert_xt6, extract_xt6, insert_xtq6, extract_xtq6, insert_xa6, extract_xa6, insert_xb6, extract_xb6, insert_xb6s, extract_xb6s, insert_xc6, extract_xc6, insert_dm, extract_dm, insert_vlesi, extract_vlesi, insert_vlensi, extract_vlensi, insert_vleui, extract_vleui, insert_vleil, extract_vleil, insert_evuimm1_ex0, extract_evuimm1_ex0, insert_evuimm2_ex0, extract_evuimm2_ex0, insert_evuimm4_ex0, extract_evuimm4_ex0, insert_evuimm8_ex0, extract_evuimm8_ex0, insert_evuimm_lt8, extract_evuimm_lt8, insert_evuimm_lt16, extract_evuimm_lt16, insert_rD_rS_even, extract_rD_rS_even, insert_off_lsp, extract_off_lsp, insert_off_spe2, extract_off_spe2, insert_Ddd, extract_Ddd): Update types. (OP, OPTO, OPL, OPVUP, OPVUPRT, A, AFRALFRC_MASK, B, BD8, BD8IO, BD15, BD24, BBO, Y_MASK , AT1_MASK, AT2_MASK, BBOCB, C_LK, C, CTX, UCTX, DX, EVSEL, IA16, I16A, I16L, IM7, LI20, MME, MD, MDS, SC, SC_MASK, SCI8, SCI8BF, SD4, SE_IM5, SE_R, SE_RR, VX, VX_LSP, VX_RA_CONST, VX_RB_CONST, VX_SPE_CRFD, VX_SPE2_CLR, VX_SPE2_SPLATB, VX_SPE2_OCTET, VX_SPE2_DDHH, VX_SPE2_HH, VX_SPE2_EVMAR, VX_SPE2_EVMAR_MASK, VXA, VXR, VXASH, X, EX, XX2, XX3, XX3RC, XX4, Z, XWRA_MASK, XLRT_MASK, XRLARB_MASK, XLRAND_MASK, XRTLRA_MASK, XRTLRARB_MASK, XRTARARB_MASK, XRTBFRARB_MASK, XOPL, XOPL2, XRCL, XRT, XRTRA, XCMP_MASK, XCMPL_MASK, XTO, XTLB, XSYNC, XEH_MASK, XDSS, XFL, XISEL, XL, XLO, XLYLK, XLOCB, XMBAR, XO, XOPS, XS, XFXM, XSPR, XUC, XW, APU): Update types in casts.
2017-11-30x86: drop Vec_Disp8Jan Beulich2-54/+28
This is fully redundant with Disp8MemShift being non-zero, and hence can be folded with normal Disp8 handling.
2017-11-30x86/Intel: issue diagnostics for redundant segment override prefixesJan Beulich6-7/+64
While we shouldn't outright reject such (as was wrongly done by commit 4d36230d59 ("x86: Update segment register check in Intel syntax"), as MASM accepts them even silently, issue (by default) a warning for such questionable constructs.
2017-11-30Revert "x86: Update segment register check in Intel syntax"Jan Beulich7-57/+18
This reverts commit 4d36230d59903b92fbe2b53b31ed64a884860f0e. I was committed without maintainer ack and regresses intended functionality. A replacement will be committed shortly.
2017-11-29Give Palmer co-credit for last patch.Jim Wilson1-0/+1
2017-11-29Fix riscv malloc error on small alignment after norvc.Jim Wilson5-11/+23
gas/ * config/tc-riscv.c (riscv_frag_align_code): New local insn_alignment. Early return if bytes less than or equal to insn_alignment. * testsuite/gas/riscv/align-1.l: New. * testsuite/gas/riscv/align-1.s: New. * testsuite/gas/riscv/riscv.exp: Use run_dump_tests. Use run_list_test for align-1.
2017-11-29In x86 -n docs, mention that you need an explicit nop fill byte.Jim Wilson2-1/+7
gas/ PR gas/22464 * doc/c-i386.texi (-n): Clarify docs.
2017-11-29[GAS][AARCH64]Fix a typo for IP1 register alias.Renlin Li4-2/+12
This should be an obvious fix. It corrects the register number for IP1 to 17. gas/ 2017-11-29 Renlin Li <renlin.li@arm.com> * config/tc-aarch64.c (reg_names): Fix IP1 register alias error. * testsuite/gas/aarch64/register_aliases.s: Add IP0 and IP1 tests. * testsuite/gas/aarch64/register_aliases.d: Update.
2017-11-29Support --localedir, --datarootdir and --datadirStefan Stroe2-4/+10
bfd/ * po/Make-in (datadir): Define as @datadir@. (localedir): Define as @localedir@. (gnulocaledir, gettextsrcdir): Use @datarootdir@. binutils/ * po/Make-in (datadir): Define as @datadir@. (localedir): Define as @localedir@. (gnulocaledir, gettextsrcdir): Use @datarootdir@. gas/ * po/Make-in (datadir): Define as @datadir@. (localedir): Define as @localedir@. (gnulocaledir, gettextsrcdir): Use @datarootdir@. gold/ * po/Make-in (datadir): Define as @datadir@. (localedir): Define as @localedir@. (gnulocaledir, gettextsrcdir): Use @datarootdir@. gprof/ * po/Make-in (datadir): Define as @datadir@. (localedir): Define as @localedir@. (gnulocaledir, gettextsrcdir): Use @datarootdir@. ld/ * po/Make-in (datadir): Define as @datadir@. (localedir): Define as @localedir@. (gnulocaledir, gettextsrcdir): Use @datarootdir@. opcodes/ * po/Make-in (datadir): Define as @datadir@. (localedir): Define as @localedir@. (gnulocaledir, gettextsrcdir): Use @datarootdir@.
2017-11-29Use the record_alignment function when creating a .note section, in case the ↵Nick Clifton2-2/+7
user has already created the section. PR 22492 * config/obj-elf.c (obj_elf_version): Use record_alignment rather than bfd_set_section_alignment.
2017-11-27Compress loads/stores with implicit 0 offset.Jim Wilson7-6/+99
gas/ * config/tc-riscv.c (riscv_handle_implicit_zero_offset): New. (riscv_ip): Cases 'k', 'l', 'm', 'n', 'M', 'N', add call to riscv_handle_implicit_zero_offset. At label load_store, replace existing code with call to riscv_handle_implicit_zero_offset. * testsuite/gas/riscv/c-ld.d, testsuite/gas/riscv/c-ld.s: New. * testsuite/gas/riscv/c-lw.d, testsuite/gas/riscv/c-lw.s: New. * testsuite/gas/riscv/riscv.exp: Run new tests.
2017-11-27gas: xtensa: speed up find_trampoline_segMax Filippov2-1/+13
find_trampoline_seg takes noticeable time when assembling source with many sections. Cache the result of the most recent search and check it first. No functional changes. gas/ 2017-11-27 Max Filippov <jcmvbkbc@gmail.com> * config/tc-xtensa.c (find_trampoline_seg): Add static variable that caches the result of the most recent search.
2017-11-27gas: xtensa: implement trampoline coalescingMax Filippov7-28/+341
There is a recurring pattern in assembly files generated by a compiler where a lot of jumps in a function are going to the same place. When these jumps are relaxed with trampolines the assembler generates a separate jump thread from each source. Create an index of trampoline jump targets for each segment and see if a jump being relaxed goes to a location from that index, in which case replace its target with a location of existing trampoline jump that results in the shortest path to the original target. gas/ 2017-11-27 Max Filippov <jcmvbkbc@gmail.com> * config/tc-xtensa.c (trampoline_chain_entry, trampoline_chain) (trampoline_chain_index): New structures. (trampoline_index): Add chain_index field. (xg_order_trampoline_chain_entry, xg_sort_trampoline_chain) (xg_find_chain_entry, xg_get_best_chain_entry) (xg_order_trampoline_chain, xg_get_trampoline_chain) (xg_find_best_eq_target, xg_add_location_to_chain) (xg_create_trampoline_chain, xg_get_single_symbol_slot): New functions. (xg_relax_fixups): Call xg_find_best_eq_target to adjust jump target to point to an existing jump. Call xg_create_trampoline_chain to create new jump target. Call xg_add_location_to_chain to add newly created trampoline jump to the corresponding chain. (add_jump_to_trampoline): Extract loop searching for a single slot with a symbol into a separate function, replace that code with a call to that function. (relax_frag_immed): Call xg_find_best_eq_target to adjust jump target to point to an existing jump. * testsuite/gas/xtensa/all.exp: Add trampoline-2 test. * testsuite/gas/xtensa/trampoline.d: Adjust absolute addresses as many duplicate trampoline chains are now coalesced. * testsuite/gas/xtensa/trampoline.s: Add _nop so that objdump stays in sync with instruction stream. * testsuite/gas/xtensa/trampoline-2.l: New test result file. * testsuite/gas/xtensa/trampoline-2.s: New test source file.
2017-11-27gas: xtensa: reuse trampoline placement codeMax Filippov3-91/+23
There's almost exact copy of the trampoline placement code in the search_trampolines function that is used for jumps generated for relaxed branch instructions. Get rid of the duplication and reuse xg_find_best_trampoline function for that. gas/ 2017-11-27 Max Filippov <jcmvbkbc@gmail.com> * config/tc-xtensa.c (search_trampolines, get_best_trampoline): Remove definitions. (xg_find_best_trampoline_for_tinsn): New function. (relax_frag_immed): Replace call to get_best_trampoline with a call to xg_find_best_trampoline_for_tinsn. * testsuite/gas/xtensa/trampoline.d: Adjust absolute addresses as the placement of trampolines for relaxed branches has been changed.
2017-11-27gas: xtensa: rewrite xg_relax_trampolineMax Filippov5-301/+284
Replace linked list of trampoline frags with an ordered array, so that instead of indexing fixups trampolines could be indexed. Keep each array in the trampoline_seg structure, so there's no need to rebuild it for every new processed segment. Don't run relaxation for each trampoline frag, instead run it for each fixup in the current segment that needs relaxation at the beginning of each relaxation pass. This way the complexity of this process drops from about O(n^2 * m) to about O(log n * m), where n is the number of trampoline frags and m is the number of fixups that need relaxation in the segment. gas/ 2017-11-27 Max Filippov <jcmvbkbc@gmail.com> * config/tc-xtensa.c (trampoline_index): New structure. (trampoline_seg): Replace trampoline list with trampoline index. (xg_find_trampoline, xg_add_trampoline_to_index) (xg_remove_trampoline_from_index, xg_add_trampoline_to_seg) (xg_is_trampoline_frag_full, xg_get_fulcrum) (xg_find_best_trampoline, xg_relax_fixup, xg_relax_fixups) (xg_is_relaxable_fixup): New functions. (J_MARGIN): New macro. (xtensa_create_trampoline_frag): Use xg_add_trampoline_to_seg instead of open-coded addition to the linked list. (dump_trampolines): Iterate through the trampoline_seg::index. (cached_fixupS, cached_fixup, fixup_cacheS, fixup_cache) (fixup_order, xtensa_make_cached_fixup) (xtensa_realloc_fixup_cache, xtensa_cache_relaxable_fixups) (xtensa_find_first_cached_fixup, xtensa_delete_cached_fixup) (xtensa_add_cached_fixup, check_and_update_trampolines): Remove definitions. (xg_relax_trampoline): Extract logic into separate functions, replace body with a call to xg_relax_fixups. (search_trampolines): Replace search in linked list with search in index. Change data type of address-tracking variables from int to offsetT. Replace abs with labs. (xg_append_jump): Finish the trampoline frag if it's full. (add_jump_to_trampoline): Remove trampoline frag from the index if the frag is full. * config/tc-xtensa.h (xtensa_frag_type): Remove next_trampoline. * testsuite/gas/xtensa/trampoline.d: Adjust absolute addresses as the placement of trampolines has slightly changed. * testsuite/gas/xtensa/trampoline.s: Add _nop so that objdump stays in sync with instruction stream.
2017-11-27gas: xtensa: merge trampoline_frag into xtensa_frag_typeMax Filippov3-67/+83
The split between fragS and trampoline_frag doesn't save much space, but makes trampolines management much more awkward. Merge trampoline_frag data into the xtensa_frag_type, which is a part of fragS. No functional changes. gas/ 2017-11-27 Max Filippov <jcmvbkbc@gmail.com> * config/tc-xtensa.c (init_trampoline_frag): Replace pointer to struct trampoline_frag parameter with pointer to fragS. (xg_append_jump): Remove jump_around parameter. (struct trampoline_frag): Remove. (struct trampoline_seg): Change type of trampoline_list from struct trampoline_frag to fragS. (xtensa_create_trampoline_frag): Don't allocate struct trampoline_frag. Initialize new fragS::tc_frag_data fields. (dump_trampolines, xg_relax_trampoline, search_trampolines) (get_best_trampoline, init_trampoline_frag) (add_jump_to_trampoline, relax_frag_immed): Replace pointer to struct trampoline_frag with a pointer to fragS. (xg_append_jump): Remove jump_around parameter, use fragS::tc_frag_data.jump_around_fix instead. (xg_relax_trampoline, init_trampoline_frag) (add_jump_to_trampoline): Don't pass jump_around parameter to xg_append_jump. * config/tc-xtensa.h (struct xtensa_frag_type): Add new fields: needs_jump_around, next_trampoline and jump_around_fix.
2017-11-27gas: xtensa: reuse find_trampoline_segMax Filippov2-22/+23
xtensa_create_trampoline_frag has opencoded fragment equivalent to find_trampoline_seg. Drop the fragment and use find_trampoline_seg instead. No functional changes. gas/ 2017-11-27 Max Filippov <jcmvbkbc@gmail.com> * config/tc-xtensa.c (find_trampoline_seg): Move above the first use. (xtensa_create_trampoline_frag): Replace trampoline seg search code with a call to find_trampoline_seg.
2017-11-27gas: xtensa: extract jump assembling for trampolinesMax Filippov2-102/+64
init_trampoline_frag, add_jump_to_trampoline and xg_relax_trampoline add a jump to the end of a trampoline frag. Extract it into a separate funciton and use it in all these places. No functional changes. gas/ 2017-11-27 Max Filippov <jcmvbkbc@gmail.com> * config/tc-xtensa.c (xg_append_jump): New function. (xg_relax_trampoline, init_trampoline_frag) (add_jump_to_trampoline): Replace trampoline jump assembling code with a call to xg_append_jump.
2017-11-27gas: extract xg_relax_trampoline from xtensa_relax_fragMax Filippov2-159/+174
To make measurement and changes easier extract trampoline relaxation function. No functional changes. gas/ 2017-11-27 Max Filippov <jcmvbkbc@gmail.com> * config/tc-xtensa.c (xg_relax_trampoline): New function. (xtensa_relax_frag): Replace trampoline relaxation code with a call to xg_relax_trampoline.
2017-11-27When creating a .note section to contain a version note, set the section ↵Nick Clifton2-0/+7
alignment to 4 bytes. PR 22492 * config/obj-elf.c (obj_elf_version): Set the alignment of the .note section.
2017-11-26gas: Update x86 sse-noavx testsH.J. Lu6-0/+16
This fixed: FAIL: i386 SSE without AVX equivalent FAIL: x86-64 SSE without AVX equivalent FAIL: x86-64 (ILP32) SSE without AVX equivalent on x86-64. * testsuite/gas/i386/sse-noavx.s: Add tests for fisttps and fisttpl. * testsuite/gas/i386/x86-64-sse-noavx.s: Likewise. * testsuite/gas/i386/ilp32/x86-64-sse-noavx.d: Updated. * testsuite/gas/i386/sse-noavx.d: Likewise. * testsuite/gas/i386/x86-64-sse-noavx.d: Likewise.
2017-11-24Add reference to implicit use in _bfd_elf_is_local_label_name.Jim Wilson2-2/+13
gas/ * write.h (FAKE_LABEL_CHAR): Expand comment.
2017-11-24x86: reject further invalid AVX-512 masking constructsJan Beulich6-3/+62
For one the register type used for masking should be validated. And then we shouldn't accept input producing encodings which will #UD when executed, as is the case when EVEX.Z is set while EVEX.AAA is zero.
2017-11-24x86: don't omit disambiguating suffixes from "fi*"Jan Beulich10-13/+25
"fi*" typically come in two (loads/stores: three) flavors, distinguished by the suffix. Don't omit the 's' one when disassembling.
2017-11-23Fix vax/ns32k/mmix gas testsuite regression.Jim Wilson2-1/+4
gas/ * testsuite/gas/all/err-fakelabel.s (dg-error): Also accept fatal error string.
2017-11-23Fix build error with --enable-targets=all.Jim Wilson3-0/+13
gas/ * as.c (INITIALIZING_EMULS): Define. * config/obj-multi.h (FAKE_LABEL_NAME): When INITIALIZING_EMULS set, don't define it.
2017-11-23Add Disp8MemShift for AVX512 VAES instructions.Igor Tsimbalist18-96/+215
opcodes/ * i386-opc.tbl: Add Disp8MemShift for AVX512 VAES instructions. * i386-tbl.h: Regenerate. gas/ * testsuite/gas/i386/avx512f_vaes-intel.d: Regenerate. * testsuite/gas/i386/avx512f_vaes.d: Likewise. * testsuite/gas/i386/avx512f_vaes-wig1-intel.d: Likewise. * testsuite/gas/i386/avx512f_vaes-wig1.d: Likewise. * testsuite/gas/i386/avx512vl_vaes-intel.d: Likewise. * testsuite/gas/i386/avx512vl_vaes.d: Likewise. * testsuite/gas/i386/x86-64-avx512f_vaes.s: Add instructions with disp8*N. * testsuite/gas/i386/x86-64-avx512f_vaes-intel.d: Regenerate. * testsuite/gas/i386/x86-64-avx512f_vaes.d: Likewise. * testsuite/gas/i386/x86-64-avx512f_vaes-wig.s: Add instructions with disp8*N. * testsuite/gas/i386/x86-64-avx512f_vaes-wig1-intel.d: Regenerate. * testsuite/gas/i386/x86-64-avx512f_vaes-wig1.d: Likewise. * testsuite/gas/i386/x86-64-avx512vl_vaes-intel.d: Regenerate. * testsuite/gas/i386/x86-64-avx512vl_vaes.d: Likewise. * testsuite/gas/i386/x86-64-avx512vl_vaes-wig.s: Add instructions with disp8*N. * testsuite/gas/i386/x86-64-avx512vl_vaes-wig1-intel.d: Regenerate. * testsuite/gas/i386/x86-64-avx512vl_vaes-wig1.d: Regenerate.
2017-11-23x86: fix AVX-512 16-bit addressingJan Beulich5-5/+28
Despite EVEX encodings not being available in real and VM86 modes, 16-bit addressing still needs to be handled properly for 16-bit protected mode as well as 16-bit addressing in 32-bit mode. Neither should displacements be dropped silently by the assembler, nor should the disassembler fail to correctly scale 8-bit displacements.
2017-11-23x86-64: always use unsigned 32-bit reloc for 32-bit addressing w/o base regJan Beulich4-2/+21
Except for %eip-relative addressing, where we don't have a suitable relocation type silently wrapping at the 4G boundary, consistently force use of R_X86_64_32 (in ELF terms) instead of its sign-extending counterpart. This wasn't right in case there was no base register in the addressing expression.
2017-11-23x86: drop redundant VSIB handling codeJan Beulich2-7/+6
The vecsib && !base_reg case is already being handled (in a more correct manner) by earlier code.
2017-11-23x86: correct UDnJan Beulich9-11/+21
Make the assembler recognize UD0, supporting only the newer form expecting a ModR/M byte. Make assembler and disassembler properly emit / expect a ModR/M byte for UD1. For the testsuite, as arch-4 already tests all UDn, avoid producing a huge delta for other tests using UD2B by making them use UD2 instead.
2017-11-23x86/Intel: don't report multiple errors for a single insn operandJan Beulich4-8/+11
Multiple errors are more confusing than helpful, as the more generic one often implies a sufficiently different adjustment than would actually be needed to fix the code. Additionally it makes it more cumbersome to add missing error checks, as the testsuite then needs extra updating.
2017-11-22Riscv ld-elf/stab failure and fake label cleanup.Jim Wilson10-14/+57
* as.c: Include write.h. (common_emul_init): Use FAKE_LABEL_NAME. * ecoff.c (add_file, ecoff_directive_end, ecoff_directive_loc): Likewise. (ecoff_build_symbols): Use FAKE_LABEL_CHAR. * expr.c (get_symbol_name): Use FAKE_LABEL_CHAR. Accept only if input_from_string is TRUE. * read.c (input_from_string): New. (read_symbol_name): Use FAKE_LABEL_CHAR. Accept only if input_from_string is TRUE. (temp_ilp): Set input_from_string to TRUE. (restore_ilp): Set input_from_string to FALSE. * read.h (input_from_string): Declare. * symbols.c: Include write.h (S_IS_LOCAL): Check for FAKE_LABEL_CHAR. (symbol_relc_make_sym): Fix comment refering to default fake label string. * write.h (FAKE_LABEL_CHAR): New. * config/tc-riscv.h (FAKE_LABEL_CHAR): Define. * testsuite/gas/all/err-fakelabel.s: New.
2017-11-22Update docs on filling text with nops.Jim Wilson2-3/+8
gas/ * doc/as.texinfo (.align): Change some to most for text nop fill. (.balign, .p2align): Likewise.
2017-11-22[GAS/ARM] Clarify relation between reg_expected_msgs and arm_reg_typeThomas Preud'homme2-23/+33
Uses of reg_expected_msgs rely on each arm_reg_type enumerator to have a message entry in the same order as the enumerator declaration. This is not clearly stated in the definition of both the arm_reg_type enum and the reg_expected_msgs. Worse, there is nothing to ensure both are kept in sync. As an attempt towards this, this patch uses C99 array designators to ensure that each message is associated with the right arm_reg_type. A comment is also added near the definition of arm_reg_type to point to the reg_expected_msgs array. Finally, the array is synced with arm_reg_type by adding the missing error message for REG_TYPE_RNB. 2017-11-22 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (arm_reg_type): Comment on the link with reg_expected_msgs. (reg_expected_msgs): Initialize using array designators with arm_reg_type index.
2017-11-22[ARC] Fix handling of ARCv2 H-register class.claziss2-0/+15
For ARCv2, h-regs are only valid unitl r31. gas/ 2017-11-21 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/hregs-err.s: New test. opcodes/ 2017-11-21 Claudiu Zissulescu <claziss@synopsys.com> * arc-opc.c (insert_rhv2): Check h-regs range.
2017-11-21x86: Add tests for -n option of x86 assemblerH.J. Lu5-0/+58
The -n command-line of x86 assembler disables optimization of alignment directives, like ".balign 8, 0x90", with multi-byte nop instructions such as leal 0(%esi),%esi. PR gas/22464 * testsuite/gas/i386/align-1.s: New file. * testsuite/gas/i386/align-1a.d: Likewise. * testsuite/gas/i386/align-1b.d: Likewise. * testsuite/gas/i386/i386.exp: Run align-1a and align-1b.
2017-11-21[ARC] Improve printing of pc-relative instructions.claziss23-155/+193
opcodes/ 2017-11-21 Claudiu Zissulescu <claziss@synopsys.com> * arc-dis.c (print_insn_arc): Pretty print pc-relative offsets. * arc-opc.c (SIMM21_A16_5): Make it pc-relative. gas/ 2017-11-21 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/b.d : Update test. * testsuite/gas/arc/bl.d: Likewise. * testsuite/gas/arc/jli-1.d: Likewise. * testsuite/gas/arc/lp.d: Likewise. * testsuite/gas/arc/pcl-relocs.d: Likewise. * testsuite/gas/arc/pcrel-relocs.d: Likewise. * testsuite/gas/arc/pic-relocs.d: Likewise. * testsuite/gas/arc/plt-relocs.d: Likewise. * testsuite/gas/arc/pseudos.d: Likewise. * testsuite/gas/arc/relax-avoid2.d: Likewise. * testsuite/gas/arc/relax-avoid3.d: Likewise. * testsuite/gas/arc/relax-b.d: Likewise. * testsuite/gas/arc/tls-relocs.d: Likewise. * testsuite/gas/arc/relax-add01.d: Likewise. * testsuite/gas/arc/relax-add04.d: Likewise. * testsuite/gas/arc/relax-ld01.d: Likewise. * testsuite/gas/arc/relax-sub01.d: Likewise. * testsuite/gas/arc/relax-sub02.d: Likewise. * testsuite/gas/arc/relax-sub04.d: Likewise. * testsuite/gas/arc/pcl-print.s: New file. * testsuite/gas/arc/pcl-print.d: Likewise. * testsuite/gas/arc/nps400-12.d: Likewise. ld/ 2017-11-21 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/ld-arc/jli-simple.d: Update test.
2017-11-21xtensa error messageAlan Modra2-16/+11
* config/tc-xtensa.c (finish_vinsn): Avoid multiple ngettext calls in error message.
2017-11-21mingw gas testsuite fixAlan Modra2-0/+5
Some x86_64 targets pad sections with nops. * testsuite/gas/i386/x86-64-reg-bad.l: Accept trailing padding.
2017-11-16Add new AArch64 FP16 FM{A|S} instructions.Tamar Christina5-2/+15
This patch separates the new FP16 instructions backported from Armv8.4-a to Armv8.2-a into a new flag order to distinguish them from the rest of the already existing optional FP16 instructions in Armv8.2-a. The new flag "+fp16fml" is available from Armv8.2-a and implies +fp16 and is mandatory on Armv8.4-a. gas/ * config/tc-aarch64.c (fp16fml): New. * doc/c-aarch64.texi (fp16fml): New. * testsuite/gas/aarch64/armv8_2-a-crypto-fp16.d (fp16): Make fp16fml. * testsuite/gas/aarch64/armv8_3-a-crypto-fp16.d (fp16): Make fp16fml. include/ * opcode/aarch64.h: (AARCH64_FEATURE_F16_FML): New. (AARCH64_ARCH_V8_4): Enable AARCH64_FEATURE_F16_FML by default. opcodes/ * aarch64-tbl.h (aarch64_feature_fp_16_v8_2): Require AARCH64_FEATURE_F16_FML and AARCH64_FEATURE_F16.
2017-11-16Correct AArch64 crypto dependencies.Tamar Christina1-0/+7
The crypto options depend on SIMD and FP, the documentation states so but the dependency is not there the code. We have mostly gotten away with this due to the default flags for the architectures (e.g. Armv8.2-a implies +simd) but this discrepancy needs to be addressed. gas/ 2017-11-16 Tamar Christina <tamar.christina@arm.com> * opcodes/aarch64-tbl.h (aarch64_feature_crypto): Add ARCH64_FEATURE_SIMD and AARCH64_FEATURE_FP. (aarch64_feature_crypto_v8_2, aarch64_feature_sm4): Likewise. (aarch64_feature_sha3): Likewise.
2017-11-16Update documentation for Arvm8.4-A changes to AArch64.Tamar Christina2-3/+16
gas/ 2017-11-16 Tamar Christina <tamar.christina@arm.com> * doc/c-aarch64.texi (armv8.4-a, sha2, sha3, sm4): New. (dotprod): Update default note.
generated by cgit v1.1 at 2025-02-09 07:15:07 +0000