| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch removes the vx2 facility flag. It will not be used by GCC
and was a misnomer anyway.
Committed to mainline and 2.28 branch.
include/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h (S390_INSTR_FLAG_VX2): Remove.
(S390_INSTR_FLAG_FACILITY_MASK): Adjust value.
gas/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): Remove S390_INSTR_FLAG_VX2
from cpu_table. Remove vx2, and novx2 from cpu_flags.
opcodes/ChangeLog:
2017-03-21 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Remove vx2 check.
* s390-opc.txt: Remove vx2 instruction flags.
|
|
Instructions for loading or storing 16/32B data from one address type to
another.
gas/ChangeLog
* testsuite/gas/arc/nps400-11.s: New file.
* testsuite/gas/arc/nps400-11.d: New file.
include/ChangeLog
* opcode/arc.h (insn_class_t): Add DMA class.
opcodes/ChangeLog
* arc-nps400-tbl.h: Add cp32/cp16 instructions format.
* arc-opc.c: Add F_NPS_NA, NPS_DMA_IMM_ENTRY, NPS_DMA_IMM_OFFSET.
(insert_nps_imm_offset): New function.
(extract_nps_imm_offset): New function.
(insert_nps_imm_entry): New function.
(extract_nps_imm_entry): New function.
|
|
* doc/as.texinfo (2byte): Note that if no expressions are present
the directive does nothing. Emphasize that the output is
unaligned, and that this can have an effect on the relocations
generated.
(4byte): Simplify description. Refer back to the 2byte
description.
(8byte): Likewise.
|
|
Nick pointed out that I hadn't documented the new -mfpu option
neon-vfpv3 and mentioned that some others were missing.
Having looked through the list only one (neon-fp16) really should be
documented; the other two entries in the real table should not be
documented as they are aliases kept for legacy compatibility reasons.
This patch adds the missing entries and notes in the main table that
the other two entries should not be documented.
I've also fixed a small spelling error in the accompanying text.
* config/tc-arm.c (arm_fpus): Note entires that should not be
documented.
* doc/c-arm.texi (-mfpu): Add missing FPU entries for neon-vfpv3 and
neon-fp16. Fix spelling error.
|
|
GCC recently added neon-vfpv3 as an alias for neon in -mfpu. This patch adds a similar alias in GAS.
* config/tc-arm.c (arm_fpus): Add neon-vfpv3 as an alias for neon.
|
|
In a later commit I'll be adding a new version of the ".nt" flag for an
ARC700 extension (NPS400) which does not require this same special
handling.
In this commit I have restricted the special flag handling to only apply
if we are assembling for ARCv2. This is a restructuring commit, and
there should be no user visible changes after this commit.
gas/ChangeLog:
* config/tc-arc.c (assemble_insn): Only handle ".t" and ".nt"
specially for ARCv2.
|
|
- They can accept 0 in imm field
2017-03-14 Kito Cheng <kito.cheng@gmail.com>
* riscv-opc.c (riscv_opcodes> <c.li>: Use the 'o' immediate encoding.
<c.andi>: Likewise.
<c.addiw> Likewise.
|
|
* config/tc-riscv.c (riscv_pre_output_hook): Fix compile time
warning about discarding a const qualifier.
|
|
gas/ChangeLog
2017-03-02 Kuan-Lin Chen <rufus@andestech.com>
* config/tc-riscv.h (HWARD2_USE_FIXED_ADVANCE_PC): New define.
|
|
gas/ChangeLog:
2017-03-02 Kuan-Lin Chen <rufus@andestech.com>
* config/tc-riscv.c (md_apply_fix): Set fx_frag and
fx_next->fx_frag for CFA_advance_loc relocations.
|
|
gas/ChangeLog:
2017-03-02 Kuan-Lin Chen <rufus@andestech.com>
* config/tc-riscv.c (md_apply_fix): Compute the correct offsets
for CFA relocations.
|
|
R_AARCH64_TLSDESC_ADD_LO12_NC to R_AARCH64_TLSDESC_ADD_LO12.
PR binutils/21202
include * elf/aarch64.h (R_AARCH64_TLSDESC_LD64_LO12_NC): Rename to
R_AARCH64_TLSDESC_LD64_LO12.
(R_AARCH64_TLSDESC_ADD_LO12_NC): Rename to
R_AARCH64_TLSDESC_ADD_LO12_NC.
bfd * reloc.c (BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC): Rename to
BFD_RELOC_AARCH64_TLSDESC_LD64_LO12.
(BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC): Rename to
BFD_RELOC_AARCH64_TLSDESC_ADD_LO12.
* bfd-in2.h: Regenerate.
* libbfd.h: Regenerate.
* elfnn-aarch64.c (IS_AARCH64_TLS_RELAX_RELOC): Update reloc
names.
(IS_AARCH64_TLSDESC_RELOC): Likewise.
(elfNN_aarch64_howto_table): Likewise.
(aarch64_tls_transition_without_check): Likewise.
(aarch64_reloc_got_type): Likewise.
(elfNN_aarch64_final_link_relocate): Likewise.
(elfNN_aarch64_tls_relax): Likewise.
(elfNN_aarch64_relocate_section): Likewise.
(elfNN_aarch64_gc_sweep_hook): Likewise.
(elfNN_aarch64_check_relocs): Likewise.
* elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise.
(_bfd_aarch64_elf_resolve_relocation): Likewise.
gas * config/tc-aarch64.c (reloc_table): Rename
BFD_RELOC_AARCH64_TLSDESC_LD64_LO12_NC to
BFD_RELOC_AARCH64_TLSDESC_LD64_LO12. Rname
BFD_RELOC_AARCH64_TLSDESC_ADD_LO12_NC to
BFD_RELOC_AARCH64_TLSDESC_ADD_LO12.
(md_apply_fix): Likewise.
(aarch64_force_relocation): Likewise.
* testsuite/gas/aarch64/tls.d: Update regexp.
ld * testsuite/ld-aarch64/ifunc-5r-local.d: Update regexp.
|
|
* doc/as.texinfo (2byte): Tidy up wording. Add note that
overlarge values will produce a warning message and be trunacted.
(4byte): Likewise.
|
|
Many x86 instructions have more than one encodings. Assembler picks
the default one, usually the shortest one. Although the ".s", ".d8"
and ".d32" suffixes can be used to swap register operands or specify
displacement size, they aren't very flexible. This patch adds pseudo
prefixes, {xxx}, to control instruction encoding. The available
pseudo prefixes are {disp8}, {disp32}, {load}, {store}, {vex2}, {vex3}
and {evex}. Pseudo prefixes are preferred over the ".s", ".d8" and
".d32" suffixes, which are deprecated.
gas/
* config/tc-i386.c (_i386_insn): Add dir_encoding and
vec_encoding. Remove swap_operand and need_vrex.
(extra_symbol_chars): Add '}'.
(md_begin): Mark '}' with LEX_BEGIN_NAME. Allow '}' in
mnemonic.
(build_vex_prefix): Don't use 2-byte VEX encoding with
{vex3}. Check dir_encoding and load.
(parse_insn): Check pseudo prefixes. Set dir_encoding.
(VEX_check_operands): Likewise.
(match_template): Check dir_encoding and load.
(parse_real_register): Set vec_encoding instead of need_vrex.
(parse_register): Likewise.
* doc/c-i386.texi: Document {disp8}, {disp32}, {load}, {store},
{vex2}, {vex3} and {evex}. Remove ".s", ".d8" and ".d32"
* testsuite/gas/i386/i386.exp: Run pseudos and x86-64-pseudos.
* testsuite/gas/i386/pseudos.d: New file.
* testsuite/gas/i386/pseudos.s: Likewise.
* testsuite/gas/i386/x86-64-pseudos.d: Likewise.
* testsuite/gas/i386/x86-64-pseudos.s: Likewise.
opcodes/
* i386-gen.c (opcode_modifiers): Replace S with Load.
* i386-opc.h (S): Removed.
(Load): New.
(i386_opcode_modifier): Replace s with load.
* i386-opc.tbl: Add {disp8}, {disp32}, {swap}, {vex2}, {vex3}
and {evex}. Replace S with Load.
* i386-tbl.h: Regenerated.
|
|
Currently, the -maltivec and -mvsx GAS options enable *all* of the altivec
and vsx instructions respecitively that have ever been added. This is in
constract to GCC's -maltivec and -mvsx options, which only enable the oldest
(ie, first) set of altivec and vsx instructions. This patch changes GAS to
mimic GCC's behaviour with respect to -maltivec and -mvsx and it solves a
problem with trying to assemble the lxvx instruction which is different
between POWER8 and POWER9.
opcodes/
* ppc-dis.c (ppc_opts) <altivec>: Do not use PPC_OPCODE_ALTIVEC2;
<vsx>: Do not use PPC_OPCODE_VSX3;
gas/
* testsuite/gas/ppc/altivec2.d (as): Use the -mpower8 option.
(objdump): Use the -Mpower8 option.
|
|
opcodes/
* ppc-opc.c (powerpc_opcodes) <lnia>: New extended mnemonic.
gas/
* testsuite/gas/ppc/power9.d <lnia> New test.
* testsuite/gas/ppc/power9.s: Likewise.
|
|
* doc/as.texinfo (2byte, 4byte, 8byte): Correct @section placement.
|
|
* doc/as.texinfo (2byte, 4byte, 8byte): Document.
* doc/c-arm.texi (2byte, 4byte, 8byte): Omit if ELF.
|
|
Support Intel Control-flow Enforcement Technology (CET) instructions:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
gas/
* config/tc-i386.c (cpu_arch): Add .cet.
* doc/c-i386.texi: Document cet.
* testsuite/gas/i386/cet-intel.d: New file.
* testsuite/gas/i386/cet.d: Likewise.
* testsuite/gas/i386/cet.s: Likewise.
* testsuite/gas/i386/x86-64-cet-intel.d: Likewise.
* testsuite/gas/i386/x86-64-cet.d: Likewise.
* testsuite/gas/i386/x86-64-cet.s: Likewise.
* testsuite/gas/i386/i386.exp: Run Intel CET tests.
opcodes/
* i386-dis.c (REG_0F1E_MOD_3): New enum.
(MOD_0F1E_PREFIX_1): Likewise.
(MOD_0F38F5_PREFIX_2): Likewise.
(MOD_0F38F6_PREFIX_0): Likewise.
(RM_0F1E_MOD_3_REG_7): Likewise.
(PREFIX_MOD_0_0F01_REG_5): Likewise.
(PREFIX_MOD_3_0F01_REG_5_RM_1): Likewise.
(PREFIX_MOD_3_0F01_REG_5_RM_2): Likewise.
(PREFIX_0F1E): Likewise.
(PREFIX_MOD_0_0FAE_REG_5): Likewise.
(PREFIX_0F38F5): Likewise.
(dis386_twobyte): Use PREFIX_0F1E.
(reg_table): Add REG_0F1E_MOD_3.
(prefix_table): Add PREFIX_MOD_0_0F01_REG_5,
PREFIX_MOD_3_0F01_REG_5_RM_1, PREFIX_MOD_3_0F01_REG_5_RM_2,
PREFIX_0F1E, PREFIX_MOD_0_0FAE_REG_5 and PREFIX_0F38F5. Update
PREFIX_0FAE_REG_6 and PREFIX_0F38F6.
(three_byte_table): Use PREFIX_0F38F5.
(mod_table): Use PREFIX_MOD_0_0F01_REG_5, PREFIX_MOD_0_0FAE_REG_5.
Add MOD_0F1E_PREFIX_1, MOD_0F38F5_PREFIX_2, MOD_0F38F6_PREFIX_0.
(rm_table): Add MOD_0F38F5_PREFIX_2, MOD_0F38F6_PREFIX_0,
RM_0F1E_MOD_3_REG_7. Use PREFIX_MOD_3_0F01_REG_5_RM_1 and
PREFIX_MOD_3_0F01_REG_5_RM_2.
* i386-gen.c (cpu_flag_init): Add CPU_CET_FLAGS.
(cpu_flags): Add CpuCET.
* i386-opc.h (CpuCET): New enum.
(CpuUnused): Commented out.
(i386_cpu_flags): Add cpucet.
* i386-opc.tbl: Add Intel CET instructions.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
|
|
Assembler displays upper case hex numbers and we need to force a good
alignment to avoid matching NOPs at the end.
* testsuite/gas/i386/x86-64-mpx-inval-2.s: Force a good alignment.
* testsuite/gas/i386/x86-64-mpx-inval-2.l: Expect [0-9A-F]+.
|
|
Add asserts that reloc size matches encoding size, and tidy.
* dw2gencfi.c (encoding_size): Return unsigned int.
(emit_expr_encoded): Assert size matches reloc bitsize.
(output_fde): Use unsigned for offset_size and addr_size. Set
addr_size earlier and use in place of constant 4 and uses of
DWARF2_FDE_RELOC_SIZE. Assert it matches reloc bitsize.
|
|
* dw2gencfi.c: Wrap overlong lines. Add parens for emacs
auto reformat. Formatting and whitespace fixes.
|
|
Putting the name, comp_dir and producer strings in the .debug_str section
makes it possible to share them across CUs. This saves a small amount of
space (about ~20K on a glibc libc.so.6 build with debuginfo). And makes
it easier for tools like rpm debugedit to adjust the source paths when
generating separate debuginfo files.
gas/
* dwarf2dbg.c (out_debug_abbrev): Use DW_FORM_strp instead of
DW_FORM_string for DW_AT_name, DW_AT_comp_dir and DW_AT_producer.
(out_debug_info): Accept symbols to name, comp_dir and producer
in the .debug_str section and emit those offsets not full strings.
(out_debug_str): New function that outputs the strings for name,
comp_dir and producer in .debug_str and generates symbols to
those strings.
(out_debug_line): Create a .debug_str section if necessary and
call out_debug_str before calling out_debug_info.
* testsuite/gas/aarch64/dwarf.d: Add extra section symbol to
expected output.
|
|
Fix a commit 6afe8e98a664 ("internal error for backwards .org"),
<https://www.sourceware.org/ml/binutils/2008-06/msg00212.html>,
GAS regression that caused legitimate code to fail assembly with an
"attempt to move .org backwards" error.
For example with the `mips-linux' target we get:
$ cat org.s
.set mips16
la $2, foo
.org 0x1000
.align 2
foo:
.half 0
$ as -o org.o org.s
org.s: Assembler messages:
org.s:3: Error: attempt to move .org backwards
$
where the location pointer is obviously not moved backwards with `.org'.
The cause is positive `stretch' in relaxation due to a PC-relative ADDIU
instruction (produced from the LA macro used) getting expanded from 2 to
4 bytes as `foo' is noticed to be out of range for the short encoding.
This in turn triggers logic in `relax_segment' which concludes in the
processing of an `rs_org' frag produced that the location pointer is
moved backwards while in fact only the amount to space forward to the
location requested has shrunk, resulting in a negative growth of the
frag.
Correct the bad logic then and instead verify that the fixed part of an
`rs_org' frag has not overrun the location requested, as per the comment
already included with the error message:
/* Growth may be negative, but variable part of frag
cannot have fewer than 0 chars. That is, we can't
.org backwards. */
which accurately describes the regression scenario. Move the comment
ahead the conditional noted, for clarity.
Add generic and MIPS test cases for the `.org' pseudo-op, including the
test case discussed though not integrated with the offending commit in
particular, adjusted to work across all targets.
gas/
* write.c (relax_segment) <rs_org>: Only bail out if the fixed
part of the frag has overrun the location requested.
* testsuite/gas/all/org-1.d: New test.
* testsuite/gas/all/org-2.d: New test.
* testsuite/gas/all/org-3.d: New test.
* testsuite/gas/all/org-4.d: New test.
* testsuite/gas/all/org-5.d: New test.
* testsuite/gas/all/org-6.d: New test.
* testsuite/gas/all/org-1.l: New stderr output.
* testsuite/gas/all/org-2.l: New stderr output.
* testsuite/gas/all/org-3.l: New stderr output.
* testsuite/gas/all/org-1.s: New test source.
* testsuite/gas/all/org-2.s: New test source.
* testsuite/gas/all/org-3.s: New test source.
* testsuite/gas/all/org-4.s: New test source.
* testsuite/gas/all/org-5.s: New test source.
* testsuite/gas/all/org-6.s: New test source.
* testsuite/gas/all/gas.exp: Run the new tests.
* testsuite/gas/mips/org-1.d: New test.
* testsuite/gas/mips/org-2.d: New test.
* testsuite/gas/mips/org-3.d: New test.
* testsuite/gas/mips/org-4.d: New test.
* testsuite/gas/mips/org-5.d: New test.
* testsuite/gas/mips/org-6.d: New test.
* testsuite/gas/mips/org-7.d: New test.
* testsuite/gas/mips/org-8.d: New test.
* testsuite/gas/mips/org-9.d: New test.
* testsuite/gas/mips/org-10.d: New test.
* testsuite/gas/mips/org-11.d: New test.
* testsuite/gas/mips/org-12.d: New test.
* testsuite/gas/mips/org-1.l: New stderr output.
* testsuite/gas/mips/org-4.l: New stderr output.
* testsuite/gas/mips/org-5.l: New stderr output.
* testsuite/gas/mips/org-6.l: New stderr output.
* testsuite/gas/mips/org-10.l: New stderr output.
* testsuite/gas/mips/org-1.s: New test source.
* testsuite/gas/mips/org-2.s: New test source.
* testsuite/gas/mips/org-3.s: New test source.
* testsuite/gas/mips/org-4.s: New test source.
* testsuite/gas/mips/org-5.s: New test source.
* testsuite/gas/mips/org-6.s: New test source.
* testsuite/gas/mips/org-7.s: New test source.
* testsuite/gas/mips/org-8.s: New test source.
* testsuite/gas/mips/org-9.s: New test source.
* testsuite/gas/mips/org-10.s: New test source.
* testsuite/gas/mips/org-11.s: New test source.
* testsuite/gas/mips/org-12.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
|
|
gas/
* doc/c-aarch64.texi (AArch64 Extensions): Document rcpc.
|
|
Just like REX.W affects operand size of the implicit rAX/rDX inputs to
PCMPESTR{I,M}, VEX.W does for VPCMPESTR{I,M}. Allow Q or L suffixes on
the instructions.
Similarly the disassembler needs to be adjusted to no longer require
VEX.W to be zero for the instructions to be valid, and to emit proper
suffixes.
Note, however, that this doesn't address the problem of there being no
way to control (at least) {,E}VEX.W for 32- or 16-bit code. Nor does it
address the problem of the many WIG instructions not getting properly
disassembled when VEX.W=1.
|
|
A number of places in elf32-nios.c created dynamic sections but didn't
set the hash table dynobj. That meant we could have duplicate dynamic
sections connected to a number of bfds, so size_dynamic_sections
didn't properly discard or allocate contents.
Also, the entire set of dynamic sections was created in check_relocs
on seeing GOT relocs, when only .got related sections are needed,
probably done to hide segfaults later in finish_dynamic_sections.
The patch fixes these issues and makes the assembler emit errors when
nios2 lacks the necessary pc-relative relocs for subtraction
expressions, rather than silently generating bad code.
eg. ld-elf/merge. I've also tidied uses of elf32_nios2_hash_table and
elf_hash_table.
bfd/
PR 20995
* elf32-nios2.c (nios2_elf32_relocate_section): Use htab
rather than elf32_nios2_hash_table or elf_hash_table.
(create_got_section): Likewise.
(nios2_elf32_finish_dynamic_symbol): Likewise.
(nios2_elf32_adjust_dynamic_symbol): Likewise.
(nios2_elf32_size_dynamic_sections): Likewise.
(nios2_elf32_check_relocs): Delete dynobj, sgot, and srelgot
vars. Use htab equivalents directly instead. Don't create
all dynamic sections on needing just the GOT. Use a goto
rather than a fall-through with reloc test. Ensure
htab->dynobj is set when making dynamic sreloc section.
(nios2_elf32_finish_dynamic_sections): Delete dynobj, use htab
equivalent directly instead. Don't segfault on looking for
.dynamic when dynamic sections have not been created. Don't
segfault on .got.plt being discarded.
(nios2_elf32_size_dynamic_sections): Delete plt and got vars.
Don't set "relocs" on .rela.plt. Do handle .sbss. Delete
fixme and another not so relevant comment.
(nios2_elf_add_symbol_hook): Delete dynobj var. If not
already set, set hash table dynobj on creating .sbss.
gas/
* config/tc-nios2.h (TC_FORCE_RELOCATION_SUB_LOCAL): Define.
ld/
* testsuite/ld-elf/merge.d: xfail for nios.
|
|
This came up because I was looking at ld/tmpdir/addpcis.o and noticed
the odd addends on REL16DX_HA. They ought to both be -4. The error
crept in due REL16DX_HA howto being pc-relative (as indeed it should
be), and code at gas/write.c:1001 after this comment
/* Make it pc-relative. If the back-end code has not
selected a pc-relative reloc, cancel the adjustment
we do later on all pc-relative relocs. */
*not* cancelling the pc-relative adjustment. So I've made a dummy
non-relative split reloc so that the generic code handles this, rather
than attempting to add hacks later in md_apply_fix which would not be
very robust. Having the new internal reloc also makes it easy to
support
addpcis rx,sym@ha
as an equivalent to
addpcis rx,(sym-0f)@ha
0:
The patch also fixes overflow checking, which must test whether the
addi will overflow too since @l relocs don't have any overflow check.
Lastly, since I was poking at md_apply_fix, I arranged to have the
generic gas/write.c code emit errors for subtraction expressions where
we lack reloc support.
include/
* elf/ppc64.h (R_PPC64_16DX_HA): New. Expand fake reloc comment.
* elf/ppc.h (R_PPC_16DX_HA): Likewise.
bfd/
* reloc.c (BFD_RELOC_PPC_16DX_HA): New.
* elf64-ppc.c (ppc64_elf_howto_raw <R_PPC64_16DX_HA>): New howto.
(ppc64_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc64_elf_ha_reloc): Correct overflow test on REL16DX_HA.
(ppc64_elf_relocate_section): Likewise.
* elf32-ppc.c (ppc_elf_howto_raw <R_PPC_16DX_HA>): New howto.
(ppc_elf_reloc_type_lookup): Translate new bfd reloc.
(ppc_elf_check_relocs): Handle R_PPC_16DX_HA to pacify gcc.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (md_assemble): Use BFD_RELOC_PPC_16DX_HA for addpcis.
(md_apply_fix): Remove fx_subsy check. Move code converting to
pcrel reloc earlier and handle BFD_RELOC_PPC_16DX_HA. Remove code
emiiting errors on seeing fx_pcrel set on unexpected relocs, as
that is done now by the generic code via..
* config/tc-ppc.h (TC_FORCE_RELOCATION_SUB_LOCAL): ..this. Define.
(TC_VALIDATE_FIX_SUB): Define.
ld/
* testsuite/ld-powerpc/addpcis.d: Define ext1 and ext2 at
limits of addpcis range.
|
|
Interpret the `jalr $0, $25' instruction encoding with an R_MIPS_JALR
relocation attached as an alias to `jr $25' and convert the jump to an
equivalent branch where possible, consequently covering the MIPSr6
architecture for the purpose of this optimization too.
bfd/
* elfxx-mips.c (mips_elf_perform_relocation): Also handle the
`jalr $0, $25' instruction encoding.
gas/
* testsuite/gas/mips/jalr4.s: Add `jalr $0, $25' instructions.
* testsuite/gas/mips/jalr4.d: Adjust accordingly. Remove MIPSr6
encoding patterns.
* testsuite/gas/mips/jalr4-n64.d: Likewise.
* testsuite/gas/mips/mipsr6@jalr4.d: New test.
* testsuite/gas/mips/mipsr6@jalr4-n32.d: New test.
* testsuite/gas/mips/mipsr6@jalr4-n64.d: New test.
ld/
* testsuite/ld-mips-elf/jalr4.dd: Adjust for `jalr $0, $25'
instructions.
* testsuite/ld-mips-elf/jalr4-r6.dd: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
|
|
HPUX has a different .comm syntax, and anything in the first column
is a label.
gas/
* testsuite/gas/elf/strtab.s: Don't put directives on first
column or continuation with labels not in first column.
ld/
* testsuite/ld-elf/elf.exp: Xfail pr20995 tests on hppa64-hpux.
Set up HPUX defsym. Run pr14170 tests and build symbol3 objects,
defining HPUX where necessary. Define HPUX for implib tests.
* testsuite/ld-elf/comm-data4.d: Run for hpux.
* testsuite/ld-elf/endsym.d: Likewise.
* testsuite/ld-elf/linkoncerdiff.d: Likewise.
* testsuite/ld-elf/comm-data4.s: Add alternate .comm when HPUX.
* testsuite/ld-elf/comm-data5.s: Likewise.
* testsuite/ld-elf/endsym.s: Likewise.
* testsuite/ld-elf/pr14170c.s: Likewise.
* testsuite/ld-elf/symbol3.s: Likewise.
* testsuite/ld-elf/implib.s: Likewise. Don't start directives
in first column.
* testsuite/ld-elf/linkoncerdiff2.s: Don't use numeric labels.
* testsuite/ld-elf/warn3.d: Run for hpux.
* testsuite/ld-scripts/rgn-at10.d: Xfail for hpux.
* testsuite/ld-scripts/rgn-at11.d: Likewise.
* testsuite/ld-scripts/size-2.d: Remove xfail for hpux.
|
|
This patch supports some additions to the SVE architecture prior to
its public release.
include/
* opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4x16)
(AARCH64_OPND_SVE_IMM_ROT1, AARCH64_OPND_SVE_IMM_ROT2)
(AARCH64_OPND_SVE_Zm3_INDEX, AARCH64_OPND_SVE_Zm3_22_INDEX)
(AARCH64_OPND_SVE_Zm4_INDEX): New aarch64_opnds.
opcodes/
* aarch64-tbl.h (OP_SVE_HMH, OP_SVE_VMU_HSD, OP_SVE_VMVU_HSD)
(OP_SVE_VMVV_HSD, OP_SVE_VMVVU_HSD, OP_SVE_VM_HSD, OP_SVE_VUVV_HSD)
(OP_SVE_VUV_HSD, OP_SVE_VU_HSD, OP_SVE_VVVU_H, OP_SVE_VVVU_S)
(OP_SVE_VVVU_HSD, OP_SVE_VVV_D, OP_SVE_VVV_D_H, OP_SVE_VVV_H)
(OP_SVE_VVV_HSD, OP_SVE_VVV_S, OP_SVE_VVV_S_B, OP_SVE_VVV_SD_BH)
(OP_SVE_VV_BHSDQ, OP_SVE_VV_HSD, OP_SVE_VZVV_HSD, OP_SVE_VZV_HSD)
(OP_SVE_V_HSD): New macros.
(OP_SVE_VMU_SD, OP_SVE_VMVU_SD, OP_SVE_VM_SD, OP_SVE_VUVV_SD)
(OP_SVE_VU_SD, OP_SVE_VVVU_SD, OP_SVE_VVV_SD, OP_SVE_VZVV_SD)
(OP_SVE_VZV_SD, OP_SVE_V_SD): Delete.
(aarch64_opcode_table): Add new SVE instructions.
(aarch64_opcode_table): Use imm_rotate{1,2} instead of imm_rotate
for rotation operands. Add new SVE operands.
* aarch64-asm.h (ins_sve_addr_ri_s4): New inserter.
(ins_sve_quad_index): Likewise.
(ins_imm_rotate): Split into...
(ins_imm_rotate1, ins_imm_rotate2): ...these two inserters.
* aarch64-asm.c (aarch64_ins_imm_rotate): Split into...
(aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2): ...these two
functions.
(aarch64_ins_sve_addr_ri_s4): New function.
(aarch64_ins_sve_quad_index): Likewise.
(do_misc_encoding): Handle "MOV Zn.Q, Qm".
* aarch64-asm-2.c: Regenerate.
* aarch64-dis.h (ext_sve_addr_ri_s4): New extractor.
(ext_sve_quad_index): Likewise.
(ext_imm_rotate): Split into...
(ext_imm_rotate1, ext_imm_rotate2): ...these two extractors.
* aarch64-dis.c (aarch64_ext_imm_rotate): Split into...
(aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2): ...these two
functions.
(aarch64_ext_sve_addr_ri_s4): New function.
(aarch64_ext_sve_quad_index): Likewise.
(aarch64_ext_sve_index): Allow quad indices.
(do_misc_decoding): Likewise.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc.h (FLD_SVE_i3h, FLD_SVE_rot1, FLD_SVE_rot2): New
aarch64_field_kinds.
(OPD_F_OD_MASK): Widen by one bit.
(OPD_F_NO_ZR): Bump accordingly.
(get_operand_field_width): New function.
* aarch64-opc.c (fields): Add new SVE fields.
(operand_general_constraint_met_p): Handle new SVE operands.
(aarch64_print_operand): Likewise.
* aarch64-opc-2.c: Regenerate.
gas/
* doc/c-aarch64.texi: Document that sve implies fp16, simd and compnum.
* config/tc-aarch64.c (parse_vector_type_for_operand): Allow .q
to be used with SVE registers.
(parse_operands): Handle new SVE operands.
(aarch64_features): Make "sve" require F16 rather than FP. Also
require COMPNUM.
* testsuite/gas/aarch64/sve.s: Add tests for new instructions.
Include compnum tests.
* testsuite/gas/aarch64/sve.d: Update accordingly.
* testsuite/gas/aarch64/sve-invalid.s: Add tests for new instructions.
* testsuite/gas/aarch64/sve-invalid.l: Update accordingly. Also
update expected output for new FMOV and MOV alternatives.
|
|
This patch adds a named "compnum" feature for the ARMv8.3-A FCADD
and FCMLA extensions.
include/
* opcode/aarch64.h (AARCH64_FEATURE_COMPNUM): New macro.
(AARCH64_ARCH_V8_3): Include AARCH64_FEATURE_COMPNUM.
opcodes/
* aarch64-tbl.h (aarch64_feature_simd_v8_3): Replace with...
(aarch64_feature_compnum): ...this.
(SIMD_V8_3): Replace with...
(COMPNUM): ...this.
(CNUM_INSN): New macro.
(aarch64_opcode_table): Use it for the complex number instructions.
gas/
* doc/c-aarch64.texi: Add a "compnum" entry.
* config/tc-aarch64.c (aarch64_features): Likewise,
* testsuite/gas/aarch64/advsimd-compnum.s: New test.
* testsuite/gas/aarch64/advsimd-compnum.d: Likewise.
|
|
Opcodes F6/1 and F7/1 are aliases of F6/0 and F7/0 in all modes. This
complements commit 8b89fe14b5 ("X86: Decode opcode 0x82 as opcode 0x80
in 32-bit mode"), just that here 64-bit mode is also covered.
|
|
gas/ChangeLog:
Test cases for the architecture level aware SPARC ASI work.
* gas/testsuite/gas/sparc/sparc.exp: 2 new tests
* gas/testsuite/gas/sparc/asi-bump-warn.s: New test
* gas/testsuite/gas/sparc/asi-bump-warn.l: Likewise
* gas/testsuite/gas/sparc/asi-arch-error.s: Likewise
* gas/testsuite/gas/sparc/asi-arch-error.l: Likewise
|
|
Discard R_MIPS_JALR and R_MICROMIPS_JALR relocations associated with
jumps that cannot be converted to an equivalent branch right away in
`mips_elf_calculate_relocation' rather than letting them through to
`mips_elf_perform_relocation'. This includes cross-mode jumps which
need to flip the ISA bit or jumps to a misaligned location that cannot
be encoded with a branch, in addition to preemptible symbol references
already handled.
Cross-mode jumps are actually already rejected as the conversion is made
in `mips_elf_perform_relocation', so in this case this change only saves
some processing. Jumps to a misaligned location are however converted,
with bits causing misalignment lost, making resulting code functionally
different even if the lone effect is avoiding an address error exception
with an instruction fetch at the jump destination requested.
Add test cases suitable, also including GAS verification to confirm that
the JALR relocations explicitly requested have indeed been output in the
intermediate objects used.
bfd/
* elfxx-mips.c (mips_elf_calculate_relocation) <R_MIPS_JALR>
<R_MICROMIPS_JALR>: Discard relocation if `cross_mode_jump_p'
or misaligned.
gas/
* testsuite/gas/mips/jalr4.d: New test.
* testsuite/gas/mips/jalr4-n32.d: New test.
* testsuite/gas/mips/jalr4-n64.d: New test.
* testsuite/gas/mips/jalr4.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
ld/
* testsuite/ld-mips-elf/jalr4.dd: New test.
* testsuite/ld-mips-elf/mips-elf.exp: Run the new test.
|
|
This adds support of new instructions to the S/390 specific parts.
The important feature of the new instruction set is the support of
single and extended precision floating point vector operations.
Note: arch12 is NOT the official name of the new CPU. It just
continues the series of archXX options supported as alternate names.
The archXX terminology refers to the edition number of the Principle
of Operations manual. The official CPU name will be added later while
keeping support of the arch12 for backwards compatibility.
No testsuite regressions.
Committed to mainline.
Bye,
-Andreas-
opcodes/ChangeLog:
2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-mkopc.c (main): Accept arch12 as cpu string and vx2 as
facility.
* s390-opc.c: Add new operand description macros, new instruction
types, instruction masks, and new .insn instruction types.
* s390-opc.txt: Add new arch12 instructions.
include/ChangeLog:
2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h (enum s390_opcode_cpu_val): New value
S390_OPCODE_ARCH12.
(S390_INSTR_FLAG_VX2): New macro definition.
gas/ChangeLog:
2017-02-23 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (s390_parse_cpu): New entry for arch12.
* doc/as.texinfo: Document arch12 as cpu type.
* doc/c-s390.texi: Likewise.
* testsuite/gas/s390/s390.exp: Run arch12 specific tests.
* testsuite/gas/s390/zarch-arch12.d: New test.
* testsuite/gas/s390/zarch-arch12.s: New test.
* testsuite/gas/s390/zarch-z13.d: Rename some mnemonics in the
output patterns.
|
|
With this change an architecture level bump due to assembly ASIs will show
up as a warning/error depending on options passed to gas.
Tested with sparc64-linux-gnu, and it does not introduce any regressions.
gas/ChangeLog:
Add support for associating SPARC ASIs with an architecture level.
* config/tc-sparc.c (parse_sparc_asi): New encode SPARC ASIs.
opcodes/ChangeLog:
Add support for associating SPARC ASIs with an architecture level.
* include/opcode/sparc.h (sparc_asi): New sparc_asi struct.
* opcodes/sparc-opc.c (asi_table): Updated asi_table and encoding/
decoding of SPARC ASIs.
|
|
|
|
|
|
Fix a functional regression with the `.end' pseudo-op, introduced with
commit ecb4347adecd ("Last take: approval for MIPS_STABS_ELF killing"),
<https://sourceware.org/ml/binutils/2002-06/msg00443.html>, and commit
dcd410fe1544 ("GNU as 2.14 on IRIX 6: crashes with shared libs"),
<https://sourceware.org/ml/binutils/2003-07/msg00415.html>, which caused
symbol values for labels placed between the end of a function's contents
and its terminating `.end' followed by one of the alignment pseudo-ops
to be different depending on whether either `-mdebug', or `-mno-pdr', or
neither of the command-line options is in effect, be it implied or
specified.
Given debug-label-end.s as follows and the `mips-linux' target we have:
$ cat debug-label-end.s
.text
.globl foo
.globl bar
.align 4, 0
.ent foo
foo:
nop
.aent bar
bar:
.insn
.end foo
.align 4, 0
.space 16
.globl baz
.ent baz
baz:
nop
.end baz
.align 4, 0
.space 16
$ as -o debug-label-end.o debug-label-end.s
$ readelf -s debug-label-end.o | grep bar
9: 00000004 0 FUNC GLOBAL DEFAULT 1 bar
$ as -mdebug -o debug-label-end.o debug-label-end.s
$ readelf -s debug-label-end.o | grep bar
9: 00000010 0 FUNC GLOBAL DEFAULT 1 bar
$ as -mno-pdr -o debug-label-end.o debug-label-end.s
$ readelf -s debug-label-end.o | grep bar
8: 00000010 0 FUNC GLOBAL DEFAULT 1 bar
$
The reason is the call to `md_flush_pending_output', which in the case
of `mips*-*-*' targets expands to `mips_emit_delays', which in turn
calls `mips_no_prev_insn', which calls `mips_clear_insn_labels', which
clears the list of outstanding labels. That list is in turn consulted
in `mips_align', called in the interpretation of alignment directives,
and the labels adjusted to the current location.
A call to `md_flush_pending_output' is only made from `s_mips_end' and
then only if `-mpdr' is in effect, which is the default for `*-*-linux*'
and some other `mips*-*-*' targets. A call to `md_flush_pending_output'
is never made from `ecoff_directive_end', which is used in place of
`s_mips_end' when `-mdebug' is in effect. Consequently if `-mno-pdr' or
`-mdebug' is in effect the list of outstanding labels makes it through
to any alignment directive that follows and the labels are differently
interpreted depending on the command-lines options used. And we want
code produced to be always the same.
Call `md_flush_pending_output' unconditionally then in `s_mips_end' and
add such a call from `ecoff_directive_end' as well, as long as the macro
is defined. While `ecoff_directive_end' is shared among targets, the
only one other than `mips*-*-*' actually using it is `alpha*-*-*' and it
does not define `md_flush_pending_output'. So the semantics isn't going
to change for it and neither it has to have its `s_alpha_end' updated
or have code in `ecoff_directive_end' conditionalized.
gas/
* ecoff.c (ecoff_directive_end) [md_flush_pending_output]: Call
`md_flush_pending_output'.
* config/tc-mips.c (s_mips_end) [md_flush_pending_output]: Call
`md_flush_pending_output' unconditionally.
* testsuite/gas/mips/debug-label-end-1.d: New test.
* testsuite/gas/mips/debug-label-end-2.d: New test.
* testsuite/gas/mips/debug-label-end-3.d: New test.
* testsuite/gas/mips/debug-label-end.s: New test source.
* testsuite/gas/mips/mips.exp: Run the new tests.
|
|
|
|
|
|
|
|
PR 21118
* NEWS: Revise powerpc register check.
* config/tc-ppc.c (ppc_optimize_expr, md_assemble): Make "invalid
register expression" a warning.
|
|
Implement the ECOFF `.aent' pseudo-op for ECOFF-style `.mdebug' section
support with ELF objects and, for consistency, also with ECOFF objects.
This is so that the same MIPS source can be assembled without and with
`.mdebug' section generation enabled.
Taking the `gas/testsuite/gas/mips/aent.s' test case source as an
example and the `mips-linux' target we have:
$ as -o aent.o aent.s
$ as -mdebug -o aent.o aent.s
aent.s: Assembler messages:
aent.s:10: Error: unknown pseudo-op: `.aent'
$
because for the !ECOFF_DEBUGGING case (which is the default) the
pseudo-op is already handled by the MIPS backend with `s_mips_ent',
however no handler is present for the opposite case.
For the MIPS target this is a functional regression introduced with
commit ecb4347adecd ("Last take: approval for MIPS_STABS_ELF killing"),
<https://sourceware.org/ml/binutils/2002-06/msg00443.html>, where
support for the `.mdebug' section was added along with its associated
`-mdebug'/`-no-mdebug' command-line options, bringing an inconsistency
between the assembly syntax supported for each of these options as far
as the `.aent' pseudo-op is concerned.
Assembly language documentation available describes the pseudo-op
respectively as follows[1]:
"
.aent name, symno Sets an alternate entry point for the current
procedure. Use this information when you want
to generate information for the debugger. It must
appear inside an .ent/.end pair."
and[2]:
"
.aent name [,symno]
Sets an alternate entry point for the current procedure. Use this
information when you want to generate information for the debugger.
This directive must appear between a pair of .ent and .end directives.
(The optional symno is for compiler use only. It refers to a dense
number in a .T file (symbol table).)"
Copy the approach from `s_mips_ent' then and add `.aent' support to the
`.ent' pseudo-op handler shared between the ELF and ECOFF object file
format backends, by setting BSF_FUNCTION for the symbol requested.
References:
[1] "MIPSpro Assembly Language Programmer's Guide", Silicon Graphics,
Inc., Document Number 007-2418-004, Section 8.1 "Op-Codes", p. 96
<http://techpubs.sgi.com/library/manuals/2000/007-2418-004/pdf/007-2418-004.pdf>
[2] "Digital UNIX Assembly Language Programmer's Guide", Digital
Equipment Corporation, Order Number: AA-PS31D-TE, March 1996,
Chapter 5 "Assembler Directives", p. 5-2
<http://h41361.www4.hpe.com/docs/base_doc/DOCUMENTATION/V40G_PDF/APS31DTE.PDF>
gas/
* ecoff.c (ecoff_directive_ent, add_procedure): Handle `.aent'.
* config/obj-ecoff.c (obj_pseudo_table): Add "aent" entry.
* config/obj-elf.c (ecoff_debug_pseudo_table): Likewise.
* testsuite/gas/mips/aent-2.d: New test.
* testsuite/gas/mips/aent-mdebug.d: New test.
* testsuite/gas/mips/aent-mdebug-2.d: New test.
* testsuite/gas/mips/mips.exp: Run the new tests.
|
|
This patch adds the SVE-specific system registers.
opcodes/
* aarch64-opc.c (aarch64_sys_regs): Add SVE registers.
(aarch64_sys_reg_supported_p): Handle them.
gas/
* testsuite/gas/aarch64/sve-sysreg.s,
testsuite/gas/aarch64/sve-sysreg.d,
testsuite/gas/aarch64/sve-sysreg-invalid.d,
testsuite/gas/aarch64/sve-sysreg-invalid.l: New tests.
|
|
The documentation entry for the SVE feature incorrectly said that
it was enabled by default for ARMv8-A or later. This patch fixes
that and also mentions that +sve implies +simd. (It also implies
+fp, but that follows by transitivity.)
gas/
* doc/c-aarch64.texi: Fix sve entry.
|
|
Fix assembler relaxation step for add, ld, mov, mpy and sub
instructions. Add tests to it.
gas/
2017-02-15 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (md_convert_frag): Remove @pcl relocation
information from input expression.
(assemble_insn): Make sure pcrel is correctly set.
(arc_pcrel_adjust): Compensate for PCL rounding.
* testsuite/gas/arc/relax-add01.d: New file.
* testsuite/gas/arc/relax-add01.s: Likewise.
* testsuite/gas/arc/relax-add02.d: Likewise.
* testsuite/gas/arc/relax-add02.s: Likewise.
* testsuite/gas/arc/relax-add03.d: Likewise.
* testsuite/gas/arc/relax-add03.s: Likewise.
* testsuite/gas/arc/relax-add04.d: Likewise.
* testsuite/gas/arc/relax-add04.s: Likewise.
* testsuite/gas/arc/relax-ld01.d: Likewise.
* testsuite/gas/arc/relax-ld01.s: Likewise.
* testsuite/gas/arc/relax-ld02.d: Likewise.
* testsuite/gas/arc/relax-ld02.s: Likewise.
* testsuite/gas/arc/relax-mov01.d: Likewise.
* testsuite/gas/arc/relax-mov01.s: Likewise.
* testsuite/gas/arc/relax-mov02.d: Likewise.
* testsuite/gas/arc/relax-mov02.s: Likewise.
* testsuite/gas/arc/relax-mpy01.d: Likewise.
* testsuite/gas/arc/relax-mpy01.s: Likewise.
* testsuite/gas/arc/relax-sub01.d: Likewise.
* testsuite/gas/arc/relax-sub01.s: Likewise.
* testsuite/gas/arc/relax-sub02.d: Likewise.
* testsuite/gas/arc/relax-sub02.s: Likewise.
* testsuite/gas/arc/relax-sub03.d: Likewise.
* testsuite/gas/arc/relax-sub03.s: Likewise.
* testsuite/gas/arc/relax-sub04.d: Likewise.
* testsuite/gas/arc/relax-sub04.s: Likewise.
opcodes/
2017-02-15 Claudiu Zissulescu <claziss@synopsys.com>
* arc-opc.c (UIMM6_20R): Define.
(SIMM12_20): Use above.
(SIMM12_20R): Define.
(SIMM3_5_S): Use above.
(UIMM7_A32_11R_S): Define.
(UIMM7_9_S): Use above.
(UIMM3_13R_S): Define.
(SIMM11_A32_7_S): Use above.
(SIMM9_8R): Define.
(UIMM10_A32_8_S): Use above.
(UIMM8_8R_S): Define.
(W6): Use above.
(arc_relax_opcodes): Use all above defines.
|
|
opcodes * arc-regs.h: Distinguish some of the registers different on
ARC700 and HS38 cpus.
gas * testsuite/gas/arc/st.d: Update for 0xe having a name now
|
|
This stops powerpc gas blithely accepting such nonsense as
"addi %f4,%cr3,%r31".
PR 21118
gas/
* NEWS: Mention powerpc register checks.
* config/tc-ppc.c (struct pd_reg): Make value a short. Add flags.
(pre_defined_registers): Delete fpscr and pmr entries. Set
register type in flags.
(cr_names): Set type in flags.
(reg_name_search): Return pointer to struct pd_reg rather than value.
(register_name): Adjust to suit. Set X_md from flags.
(ppc_parse_name): Likewise.
(ppc_optimize_expr): New function.
(md_assemble): Verify expresion reg flags match operand.
* config/tc-ppc.h (md_optimize_expr): Define.
(ppc_optimize_expr): Declare.
include/
* opcode/ppc.h (PPC_OPERAND_*): Reassign values, regs first.
(PPC_OPERAND_SPR, PPC_OPERAND_GQR): Define.
opcodes/
* ppc-opc.c (powerpc_operands): Flag SPR, SPRG and TBR entries
with PPC_OPERAND_SPR. Flag PSQ and PSQM with PPC_OPERAND_GQR.
|
