aboutsummaryrefslogtreecommitdiff
path: root/gas/NEWS
AgeCommit message (Collapse)AuthorFilesLines
2014-07-01Add support for the AVR Tiny series of microcontrollers.Barney Stratford1-0/+2
* archures.c: add avrtiny architecture for avr target. * bfd-in2.h: Regenerate. * cpu-avr.c (arch_info_struct): add avrtiny arch info. * elf32-avr.c (elf_avr_howto_table): new relocation R_AVR_LDS_STS_16 added for 16 bit LDS/STS instruction of avrtiny arch. (avr_reloc_map): reloc R_AVR_LDS_STS_16 is mapped to BFD_RELOC_AVR_LDS_STS_16. (bfd_elf_avr_final_write_processing): select machine number avrtiny arch. (elf32_avr_object_p): set machine number for avrtiny arch. * libbfd.h: Regenerate. * reloc.c: Add documentation for BFD_RELOC_AVR_LDS_STS_16 reloc. * config/tc-avr.c (mcu_types): Add avrtiny arch. Add avrtiny arch devices attiny4, attiny5, attiny9, attiny10, attiny20 and attiny40. (md_show_usage): Add avrtiny arch in usage message. (avr_operand): validate and issue error for invalid register for avrtiny. add new reloc exp for 16 bit lds/sts instruction. (md_apply_fix): check 16 bit lds/sts operand for out of range and encode. (md_assemble): check ISA for arch and issue diagnostic. * include/elf/avr.h (E_AVR_MACH_AVRTINY): define avrtiny machine number. (R_AVR_LDS_STS_16): define 16 bit lds/sts reloc number. * include/opcode/avr.h (AVR_ISA_TINY): define avrtiny specific ISA. (AVR_ISA_2xxxa): define ISA without LPM. (AVR_ISA_AVRTINY): define avrtiny arch ISA. Add doc for contraint used in 16 bit lds/sts. Adjust ISA group for icall, ijmp, pop and push. Add 16 bit lds/sts encoding and update 32 bit lds/sts constraints. * opcodes/avr-dis.c (avr_operand): Handle constraint j for 16 bit lds/sts. (print_insn_avr): do not select opcode if insn ISA is avrtiny and machine is not avrtiny. * Makefile.am (ALL_EMULATION_SOURCES): add avrtiny emulation source. (eavrtiny.c): add rules for avrtiny emulation source. * Makefile.in: Regenerate. * configure.tgt: Add avrtiny to avr target emulations. * scripttempl/avrtiny.sc: New file. linker script template for avrtiny arch. * emulparams/avrtiny.sh: New file. emulation parameters for avrtiny arch.
2014-04-22Remove support for the (deprecated) openrisc and or32 configurations and replaceChristian Svensson1-0/+2
with support for the new or1k configuration.
2014-03-19Add support for ARM assembler produced by CodeCompositor Studio.Daniel Gutson1-0/+3
* config/tc-arm.c (codecomposer_syntax): New flag that states whether the CCS syntax compatibility mode is on or off. (asmfunc_states): New enum to represent the asmfunc directive state. (asmfunc_state): New variable holding the asmfunc directive state. (comment_chars): Rename to arm_comment_chars. (line_separator_chars): Rename to arm_line_separator_chars. (s_ccs_ref): New function that handles the .ref directive. (asmfunc_debug): New function. (s_ccs_asmfunc): New function that handles the .asmfunc directive. (s_ccs_endasmfunc): New function that handles the .endasmfunc directive. (s_ccs_def): New function that handles the .def directive. (tc_start_label_without_colon): New function. (md_pseudo_table): Added new CCS directives. (arm_ccs_mode): New function that handles the -mccs command line option. (arm_long_opts): Added new -mccs command line option. * config/tc-arm.h (LABELS_WITHOUT_COLONS): New macro. (TC_START_LABEL_WITHOUT_COLON): New macro. (tc_start_label_without_colon): Added extern function declaration. (tc_comment_chars): Define. (tc_line_separator_chars): Define. * app.c (do_scrub_begin): Use tc_line_separator_chars, if defined. * read.c (read_begin): Likewise. * doc/as.texinfo: Add documentation for the -mccs command line option. * doc/c-arm.texi: Likewise. * doc/internals.texi: Document tc_line_separator_chars. * NEWS: Mention the new feature. * gas/arm/ccs.s: New test case. * gas/arm/ccs.d: New expected disassembly.
2014-03-05Update copyright yearsAlan Modra1-1/+1
2013-12-13Add support for Andes NDS32:Kuan-Lin Chen1-0/+2
BFD: * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Add nds32 files. * Makefile.in: Regenerate. * archures.c (bfd_nds32_arch): Add nds32 target. * bfd-in2.h: Regenerate. * config.bfd (nds32*le-*-linux): Add bfd_elf32_nds32lelin_vec and bfd_elf32_nds32belin_vec. (nds32*be-*-linux*): Likewise. (nds32*le-*-*): Add bfd_elf32_nds32le_vec and bfd_elf32_nds32be_vec. (nds32*be-*-*): Likewise. * configure.in (bfd_elf32_nds32be_vec): Add elf32-nds32.lo. (bfd_elf32_nds32le_vec): Likewise. (bfd_elf32_nds32belin_vec): Likewise. (bfd_elf32_nds32lelin_vec): Likewise. * configure: Regenerate. * cpu-nds32.c: New file for nds32. * elf-bfd.h: Add NDS32_ELF_DATA. * elf32-nds32.c: New file for nds32. * elf32-nds32.h: New file for nds32. * libbfd.h: Regenerate. * reloc.c: Add relocations for nds32. * targets.c (bfd_elf32_nds32be_vec): New declaration for nds32. (bfd_elf32_nds32le_vec): Likewise. (bfd_elf32_nds32belin_vec): Likewise. (bfd_elf32_nds32lelin_vec): Likewise. BINUTILS: * readelf.c: Include elf/nds32.h (guess_is_rela): Add case for EM_NDS32. (dump_relocations): Add case for EM_NDS32. (decode_NDS32_machine_flags): New. (get_machine_flags): Add case for EM_NDS32. (is_32bit_abs_reloc): Likewise. (is_16bit_abs_reloc): Likewise. (process_nds32_specific): New. (process_arch_specific): Add case for EM_NDS32. * NEWS: Announce Andes nds32 support. * MAINTAINERS: Add nds32 maintainers. TESTSUITE: * binutils-all/objdump.exp: Add NDS32 cpu. * binutils-all/readelf.r: Skip extra reloc created by NDS32. GAS: * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nds32.c. (TARGET_CPU_HFILES): Add config/tc-nds32.h. * Makefile.in: Regenerate. * configure.in (nds32): Add nds32 target extension config support. * configure.tgt : Add case for nds32-*-elf* and nds32-*-linux*. * configure: Regenerate. * config/tc-nds32.c: New file for nds32. * config/tc-nds32.h: New file for nds32. * doc/Makefile.am (CPU_DOCS): Add c-nds32.texi. * doc/Makefile.in: Regenerate. * doc/as.texinfo: Add nds32 options. * doc/all.texi: Set NDS32. * doc/c-nds32.texi: New file dor nds32 document. * NEWS: Announce Andes nds32 support. TESTSUITE: * gas/all/gas.exp: Add expected failures for NDS32. * gas/elf/elf.exp: Likewise. * gas/lns/lns.exp: Use alternate test. * gas/macros/irp.d: Skip for NDS32. * gas/macros/macros.exp: Skip some tests for the NDS32. * gas/macros/rept.d: Skip for NDS32. * gas/macros/test3.d: Skip for NDS32. * gas/nds32: New directory. * gas/nds32/alu-1.s: New test. * gas/nds32/alu-1.d: Likewise. * gas/nds32/alu-2.s: Likewise. * gas/nds32/alu-2.d: Likewise. * gas/nds32/br-1.d: Likewise. * gas/nds32/br-1.s: Likewise. * gas/nds32/br-2.d: Likewise. * gas/nds32/br-2.s: Likewise. * gas/nds32/ji-jr.d: Likewise. * gas/nds32/ji-jr.s: Likewise. * gas/nds32/ls.d: Likewise. * gas/nds32/ls.s: Likewise. * gas/nds32/lsi.d: Likewise. * gas/nds32/lsi.s: Likewise. * gas/nds32/to-16bit-v1.d: Likewise. * gas/nds32/to-16bit-v1.s: Likewise. * gas/nds32/to-16bit-v2.d: Likewise. * gas/nds32/to-16bit-v2.s: Likewise. * gas/nds32/to-16bit-v3.d: Likewise. * gas/nds32/to-16bit-v3.s: Likewise. * gas/nds32/nds32.exp: New test driver. LD: * Makefile.am (ALL_EMULATION_SOURCES): Add nds32 target. * Makefile.in: Regenerate. * configure.tgt: Add case for nds32*le-*-elf*, nds32*be-*-elf*, nds32*le-*-linux-gnu*, and nds32*be-*-linux-gnu*. * emulparams/nds32belf.sh: New file for nds32. * emulparams/nds32belf_linux.sh: Likewise. * emulparams/nds32belf16m.sh: Likewise. * emulparams/nds32elf.sh: Likewise. * emulparams/nds32elf_linux.sh: Likewise. * emulparams/nds32elf16m.sh: Likewise. * emultempl/nds32elf.em: Likewise. * scripttempl/nds32elf.sc}: Likewise. * gen-doc.texi: Set NDS32. * ld.texinfo: Set NDS32. * NEWS: Announce Andes nds32 support. TESTSUITE: * lib/ld-lib.exp: Add NDS32 to list of targets that do not support shared library generation. * ld-nds32: New directory. * ld-nds32/branch.d: New test. * ld-nds32/branch.ld: New test. * ld-nds32/branch.s: New test. * ld-nds32/diff.d: New test. * ld-nds32/diff.ld: New test. * ld-nds32/diff.s: New test. * ld-nds32/gp.d: New test. * ld-nds32/gp.ld: New test. * ld-nds32/gp.s: New test. * ld-nds32/imm.d: New test. * ld-nds32/imm.ld: New test. * ld-nds32/imm.s: New test. * ld-nds32/imm_symbol.s: New test. * ld-nds32/relax_jmp.d: New test. * ld-nds32/relax_jmp.ld: New test. * ld-nds32/relax_jmp.s: New test. * ld-nds32/relax_load_store.d: New test. * ld-nds32/relax_load_store.ld: New test. * ld-nds32/relax_load_store.s: New test. * ld-nds32/nds32.exp: New file. OPCODES: * Makefile.am (TARGET_LIBOPCODES_CFILES): Add nds32-asm.c and nds32-dis.c. * Makefile.in: Regenerate. * configure.in: Add case for bfd_nds32_arch. * configure: Regenerate. * disassemble.c (ARCH_nds32): Define. * nds32-asm.c: New file for nds32. * nds32-asm.h: New file for nds32. * nds32-dis.c: New file for nds32. * nds32-opc.h: New file for nds32. INCLUDE: * dis-asm.h (print_insn_nds32): Add nds32 target. * elf/nds32.h: New file for nds32. * opcode/nds32.h: New file for nds32.
2013-09-18binutils/Tristan Gingold1-0/+2
2013-09-18 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.24. gas/ 2013-09-18 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.24. ld/ 2013-09-18 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.24.
2013-06-22 * configure.ac (mips*-*-bsd*, mips*-*-ultrix*, mips*-*-osf*)Richard Sandiford1-0/+2
(mips*-*-ecoff*, mips*-*-pe*, mips*-*-irix* [v4 and earlier]) (mips*-*-lnews*, mips*-*-riscos*): Add gas and ld to noconfigdirs. * configure: Regenerate. gas/ * NEWS: Note removal of ECOFF support. * doc/as.texinfo (--emulation): Update for the removal of MIPS ECOFF. * Makefile.am (TARG_ENV_HFILES): Remove config/te-lnews.h. (MULTI_CFILES): Remove config/e-mipsecoff.c. * Makefile.in: Regenerate. * configure.in: Remove MIPS ECOFF references. (mips-sony-bsd*, mips-*-bsd*, mips-*-lnews*-ecoff, mips-*-*-ecoff): Delete cases. (mips-*-irix5*-*, mips*-*-linux*-*, mips*-*-freebsd*) (mips*-*-kfreebsd*-gnu, mips-*-*-elf): Fold into... (mips-*-*): ...this single case. (mipsbecoff, mipslecoff, mipsecoff): Remove emulations. Expect MIPS emulations to be e-mipself*. * configure: Regenerate. * configure.tgt (mips-sony-bsd*, mips-*-ultrix*, mips-*-osf*) (mips-*-ecoff*, mips-*-pe*, mips-*-irix*, ips-*-lnews*, mips-*-riscos*) (mips-*-sysv*): Remove coff and ecoff cases. * as.c (mipsbecoff, mipslecoff, mipsecoff): Remove. * ecoff.c: Remove reference to MIPS ECOFF. * config/e-mipsecoff.c, config/te-lnews.h: Delete files. * config/tc-mips.c (ECOFF_LITTLE_FORMAT): Delete. (RDATA_SECTION_NAME, mips_target_form): Remove COFF and ECOFF cases. (mips_hi_fixup): Tweak comment. (append_insn): Require a howto. (mips_after_parse_args): Remove OBJ_MAYBE_ECOFF code. gas/testsuite/ * gas/all/gas.exp: Remove reference to mips-ecoff. * gas/mips/branch-misc-1.d, gas/mips/branch-misc-2.d, gas/mips/branch-misc-2-64.d, gas/mips/branch-misc-2pic.d, gas/mips/branch-misc-2pic-64.d, gas/mips/branch-swap.d: Remove skips for mips-*-ecoff. ld/ * NEWS: Document the removal of MIPS ECOFF targets. * ld.texinfo (--gpsize=@var{value}): Use MIPS ELF rather than MIPS ECOFF as an example of a target that supports small data. * ldmain.c (g_switch_value): Likewise. * configure.tgt (mips*-*-pe, mips*-dec-ultrix*, mips*-dec-osf*) (mips*-sgi-irix* [v4 and earlier], mips*el-*-ecoff*, mips*-*-ecoff*) (mips*-*-bsd*, mips*-*-lnews*): Remove cases. * Makefile.am (ALL_EMULATION_SOURCES): Remove emipsbig.c, emipsbsd.c, emipsidt.c, emipsidtl.c, emipslit.c, emipslnews.c and emipspe.c. (emipsbig.c, emipsbsd.c, emipsidt.c, emipsidtl.c, emipslit.c) (emipslnews.c, emipspe.c): Delete rules. * Makefile.in: Regenerate. * emulparams/mipsbig.sh, emulparams/mipsbsd.sh, emulparams/mipsidt.sh, emulparams/mipsidtl.sh, emulparams/mipslit.sh, emulparams/mipslnews.sh, emulparams/mipspe.sh, emultempl/mipsecoff.em: Delete. * emultempl/m68kcoff.em: Update comment to say that MIPS ECOFF support has now been removed. * emultempl/pe.em: Remove TARGET_IS_mipspe checks.
2013-05-02 * archures.c: Add some more MSP430 machine numbers.Nick Clifton1-0/+2
* config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-04-29 * elflink.c (_bfd_elf_gc_mark_extra_sections): Remove mark fromNick Clifton1-0/+3
fragmented .debug_line sections associated with unmarked code sections. * dwarf.c (read_debug_line_header): New function. Reads in a header in a .debug_line section. (display_debug_lines_raw): Use new function. Handle fragmentary .debug_line sections. (display_debug_lines_decoded): Likewise. * readelf.c (process_section_headers): Handle fragmenatry .debug_line sections. (display_debug_section): Likewise. * as.c (Options): Add -gdwarf-sections. (parse_args): Likewise. * as.h (flag_dwarf_sections): Declare. * dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes. (process_entries): When -gdwarf-sections is enabled generate fragmentary .debug_line sections. (out_debug_line): Set the section for the .debug_line section end symbol. * doc/as.texinfo: Document -gdwarf-sections. * NEWS: Mention -gdwarf-sections. * gas/elf/dwarf2-3.d: Fix expected readelf output. * scripttempl/DWARF.sc: Add support for .debug_line.* and .debug_line_end.
2013-02-062013-02-06 Sandra Loosemore <sandra@codesourcery.com>Sandra Loosemore1-0/+2
Andrew Jenner <andrew@codesourcery.com> Based on patches from Altera Corporation. bfd/ * Makefile.am (ALL_MACHINES): Add cpu-nios2.lo. (ALL_MACHINES_CFILES): Add cpu-nios2.c. (BFD_BACKENDS): Add elf32-nios2.lo. (BFD32_BACKENDS_CFILES): Add elf32-nios2.c. * Makefile.in: Regenerated. * configure.in: Add entries for bfd_elf32_bignios2_vec and bfd_elf32_littlenios2_vec. * configure: Regenerated. * config.bfd: Add cases for nios2. * archures.c (enum bfd_architecture): Add bfd_arch_nios2. (bfd_mach_nios2): Define. (bfd_nios2_arch): Declare. (bfd_archures_list): Add bfd_nios2_arch. * targets.c (bfd_elf32_bignios2_vec): Declare. (bfd_elf32_littlenios2_vec): Declare. (_bfd_target_vector): Add entries for bfd_elf32_bignios2_vec and bfd_elf32_littlenios2_vec. * elf-bfd.h (enum elf_target_id): Add NIOS2_ELF_DATA. * reloc.c (enum bfd_reloc_code_real): Add Nios II relocations. * bfd-in2.h: Regenerated. * libbfd.h: Regenerated. * cpu-nios2.c: New file. * elf32-nios2.c: New file. opcodes/ * Makefile.am (TARGET_LIBOPCODES_CFILES): Add nios2-dis.c and nios2-opc.c. * Makefile.in: Regenerated. * configure.in: Add case for bfd_nios2_arch. * configure: Regenerated. * disassemble.c (ARCH_nios2): Define. (disassembler): Add case for bfd_arch_nios2. * nios2-dis.c: New file. * nios2-opc.c: New file. include/ * dis-asm.h (print_insn_big_nios2): Declare. (print_insn_little_nios2): Declare. include/elf * nios2.h: New file. include/opcode/ * nios2.h: New file. gas/ * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c. (TARGET_CPU_HFILES): Add config/tc-nios2.h. * Makefile.in: Regenerated. * configure.tgt: Add case for nios2*-linux*. * config/obj-elf.c: Conditionally include elf/nios2.h. * config/tc-nios2.c: New file. * config/tc-nios2.h: New file. * doc/Makefile.am (CPU_DOCS): Add c-nios2.texi. * doc/Makefile.in: Regenerated. * doc/all.texi: Set NIOSII. * doc/as.texinfo (Overview): Add Nios II options. (Machine Dependencies): Include c-nios2.texi. * doc/c-nios2.texi: New file. * NEWS: Note Altera Nios II support. gas/testsuite/ * gas/nios2/add.d: New. * gas/nios2/add.s: New. * gas/nios2/align_fill.d: New. * gas/nios2/align_fill.s: New. * gas/nios2/align_text.d: New. * gas/nios2/align_text.s: New. * gas/nios2/and.d: New. * gas/nios2/and.s: New. * gas/nios2/branch.d: New. * gas/nios2/branch.s: New. * gas/nios2/break.d: New. * gas/nios2/break.s: New. * gas/nios2/bret.d: New. * gas/nios2/bret.s: New. * gas/nios2/cache.d: New. * gas/nios2/cache.s: New. * gas/nios2/call26.d: New. * gas/nios2/call26.s: New. * gas/nios2/call.d: New. * gas/nios2/call.s: New. * gas/nios2/cmp.d: New. * gas/nios2/cmp.s: New. * gas/nios2/comments.d: New. * gas/nios2/comments.s: New. * gas/nios2/complex.d: New. * gas/nios2/complex.s: New. * gas/nios2/ctl.d: New. * gas/nios2/ctl.s: New. * gas/nios2/custom.d: New. * gas/nios2/custom.s: New. * gas/nios2/etbt.d: New. * gas/nios2/etbt.s: New. * gas/nios2/flushda.d: New. * gas/nios2/flushda.s: New. * gas/nios2/illegal.l: New. * gas/nios2/illegal.s: New. * gas/nios2/jmp.d: New. * gas/nios2/jmp.s: New. * gas/nios2/ldb.d: New. * gas/nios2/ldb.s: New. * gas/nios2/ldh.d: New. * gas/nios2/ldh.s: New. * gas/nios2/ldw.d: New. * gas/nios2/ldw.s: New. * gas/nios2/lineseparator.d: New. * gas/nios2/lineseparator.s: New. * gas/nios2/mov.d: New. * gas/nios2/movia.d: New. * gas/nios2/movia.s: New. * gas/nios2/movi.d: New. * gas/nios2/movi.s: New. * gas/nios2/mov.s: New. * gas/nios2/mul.d: New. * gas/nios2/mul.s: New. * gas/nios2/nios2.exp: New. * gas/nios2/nor.d: New. * gas/nios2/nor.s: New. * gas/nios2/or.d: New. * gas/nios2/or.s: New. * gas/nios2/ret.d: New. * gas/nios2/ret.s: New. * gas/nios2/rol.d: New. * gas/nios2/rol.s: New. * gas/nios2/rotate.d: New. * gas/nios2/rotate.s: New. * gas/nios2/stb.d: New. * gas/nios2/stb.s: New. * gas/nios2/sth.d: New. * gas/nios2/sth.s: New. * gas/nios2/stw.d: New. * gas/nios2/stw.s: New. * gas/nios2/sub.d: New. * gas/nios2/sub.s: New. * gas/nios2/sync.d: New. * gas/nios2/sync.s: New. * gas/nios2/trap.d: New. * gas/nios2/trap.s: New. * gas/nios2/tret.d: New. * gas/nios2/tret.s: New. * gas/nios2/warn_noat.l: New. * gas/nios2/warn_noat.s: New. * gas/nios2/warn_nobreak.l: New. * gas/nios2/warn_nobreak.s: New. * gas/nios2/xor.d: New. * gas/nios2/xor.s: New. ld/ * Makefile.am (enios2elf.c): New rule. * Makefile.in: Regenerated. * configure.tgt: Add case for nios2*-*-*. * emulparams/nios2elf.sh: New file. * NEWS: Note Altera Nios II support. ld/testsuite/ * ld-nios2/emit-relocs-1a.s: New. * ld-nios2/emit-relocs-1b.s: New. * ld-nios2/emit-relocs-1.d: New. * ld-nios2/emit-relocs-1.ld: New. * ld-nios2/gprel.d: New. * ld-nios2/gprel.s: New. * ld-nios2/hilo16.d: New. * ld-nios2/hilo16.s: New. * ld-nios2/hilo16_symbol.s: New. * ld-nios2/imm5.d: New. * ld-nios2/imm5.s: New. * ld-nios2/imm5_symbol.s: New. * ld-nios2/nios2.exp: New. * ld-nios2/pcrel16.d: New. * ld-nios2/pcrel16_label.s: New. * ld-nios2/pcrel16.s: New. * ld-nios2/relax_callr.d: New. * ld-nios2/relax_callr.ld: New. * ld-nios2/relax_callr.s: New. * ld-nios2/relax_cjmp.d: New. * ld-nios2/relax_cjmp.s: New. * ld-nios2/relax_jmp.ld: New. * ld-nios2/relax_section.d: New. * ld-nios2/relax_section.s: New. * ld-nios2/relax_ujmp.d: New. * ld-nios2/relax_ujmp.s: New. * ld-nios2/reloc.d: New. * ld-nios2/reloc.s: New. * ld-nios2/reloc_symbol.s: New. * ld-nios2/s16.d: New. * ld-nios2/s16.s: New. * ld-nios2/s16_symbol.s: New. * ld-nios2/u16.d: New. * ld-nios2/u16.s: New. * ld-nios2/u16_symbol.s: New. * ld-elf/indirect.exp: Skip on targets that don't support -shared -fPIC. * ld-elfcomm/elfcomm.exp: Build with -G0 for nios2. * ld-plugin/lto.exp: Skip shared library tests on targets that don't support them. Skip execution tests on non-native targets. binutils/ * readelf.c: Include elf/nios2.h. (dump_relocations): Add case for EM_ALTERA_NIOS2. (get_nios2_dynamic_type): New. (get_dynamic_type): Add case for EM_ALTERA_NIOS2. (is_32bit_abs_reloc): Fix EM_ALTERA_NIOS2 case. (is_16bit_abs_reloc): Likewise. (is_none_reloc): Add EM_ALTERA_NIOS2 and EM_NIOS32 cases. * NEWS: Note Altera Nios II support. * MAINTAINERS: Add Nios II maintainers.
2013-01-10 * common.h: Fix case of "Meta".Nick Clifton1-0/+2
* metag.h: New file. * dis-asm.h (print_insn_metag): New declaration. * metag.h: New file. * Makefile.am: Add Meta. * Makefile.in: Regenerate. * configure: Regenerate. * configure.in: Add Meta. * disassemble.c: Add Meta support. * metag-dis.c: New file. * Makefile.am: Add Meta. * Makefile.in: Regenerate. * archures.c (bfd_mach_metag): New. * bfd-in2.h: Regenerate. * config.bfd: Add Meta. * configure: Regenerate. * configure.in: Add Meta. * cpu-metag.c: New file. * elf-bfd.h: Add Meta. * elf32-metag.c: New file. * elf32-metag.h: New file. * libbfd.h: Regenerate. * reloc.c: Add Meta relocations. * targets.c: Add Meta. * Makefile.am: Add Meta. * Makefile.in: Regenerate. * config/tc-metag.c: New file. * config/tc-metag.h: New file. * configure.tgt: Add Meta. * doc/Makefile.am: Add Meta. * doc/Makefile.in: Regenerate. * doc/all.texi: Add Meta. * doc/as.texiinfo: Document Meta options. * doc/c-metag.texi: New file. * gas/metag/labelarithmetic.d: New file. * gas/metag/labelarithmetic.s: New file. * gas/metag/metacore12.d: New file. * gas/metag/metacore12.s: New file. * gas/metag/metacore21-invalid.l: New file. * gas/metag/metacore21-invalid.s: New file. * gas/metag/metacore21.d: New file. * gas/metag/metacore21.s: New file. * gas/metag/metacore21ext.d: New file. * gas/metag/metacore21ext.s: New file. * gas/metag/metadsp21-invalid.l: New file. * gas/metag/metadsp21-invalid.s: New file. * gas/metag/metadsp21.d: New file. * gas/metag/metadsp21.s: New file. * gas/metag/metadsp21ext.d: New file. * gas/metag/metadsp21ext.s: New file. * gas/metag/metafpu21.d: New file. * gas/metag/metafpu21.s: New file. * gas/metag/metafpu21ext.d: New file. * gas/metag/metafpu21ext.s: New file. * gas/metag/metag.exp: New file. * gas/metag/tls.d: New file. * gas/metag/tls.s: New file. * Makefile.am: Add Meta. * Makefile.in: Regenerate. * configure.tgt: Add Meta. * emulparams/elf32metag.sh: New file. * emultempl/metagelf.em: New file. * ld-elf/merge.d: Mark Meta as xfail. * ld-gc/start.d: Skip this test on Meta. * ld-gc/personality.d: Skip this test on Meta. * ld-metag/external.s: New file. * ld-metag/metag.exp: New file. * ld-metag/pcrel.d: New file. * ld-metag/pcrel.s: New file. * ld-metag/shared.d: New file. * ld-metag/shared.r: New file. * ld-metag/shared.s: New file. * ld-metag/stub.d: New file. * ld-metag/stub.s: New file. * ld-metag/stub_pic_app.d: New file. * ld-metag/stub_pic_app.r: New file. * ld-metag/stub_pic_app.s: New file. * ld-metag/stub_pic_shared.d: New file. * ld-metag/stub_pic_shared.s: New file. * ld-metag/stub_shared.d: New file. * ld-metag/stub_shared.r: New file. * ld-metag/stub_shared.s: New file. * binutils/readelf.c: (guess_is_rela): Add EM_METAG. (dump_relocations): Add EM_METAG. (get_machine_name): Correct case for Meta. (is_32bit_abs_reloc): Add support for Meta ADDR32 reloc. (is_none_reloc): Add support for Meta NONE reloc.
2012-12-17Add copyright noticesNick Clifton1-0/+8
2012-08-22Move aarch64 announcement into 2.23 section.Nick Clifton1-2/+2
2012-08-13Add support for 64-bit ARM architecture: AArch64Nick Clifton1-0/+2
2012-07-27binutils/Tristan Gingold1-0/+2
2012-07-27 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.23. gas/ 2012-07-27 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.23. ld/ 2012-07-27 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.23.
2012-06-22gas/Roland McGrath1-1/+1
* NEWS: Mention 'rep ret' too. gas/testsuite/ * gas/i386/rep-ret.d: New file. * gas/i386/rep-ret.s: New file. * gas/i386/i386.exp: Add the new test. opcodes/ * i386-opc.tbl: Add RepPrefixOk to ret. * i386-tbl.h: Regenerate.
2012-06-22gas/Roland McGrath1-0/+2
* config/tc-i386.c (parse_insn): Don't complain about REP prefix when the template has opcode_modifier.repprefixok set. * NEWS: Mention the change. gas/testsuite/ * gas/i386/rep-bsf.d: New file. * gas/i386/rep-bsf.s: New file. * gas/i386/i386.exp: Add the new test. opcodes/ * i386-opc.h (RepPrefixOk): New enum constant. (i386_opcode_modifier): New bitfield 'repprefixok'. * i386-gen.c (opcode_modifiers): Add RepPrefixOk. * i386-opc.tbl: Add RepPrefixOk to bsf, bsr, and to all instructions that have IsString. * i386-tbl.h: Regenerate.
2012-05-15 * config/tc-m68hc11.c: Add S12X and XGATE co-processor support.Nick Clifton1-0/+2
Add option to offset S12 addresses into XGATE memory space. Tweak target flags to match other tools. (i.e. -m m68hc11). * doc/as.texinfo: Mention new options. * doc/c-m68hc11.texi: Document new options. * NEWS: Mention new support. * archures.c: Add bfd_arch_m9s12x and bfd_arch_m9s12xg. * config.bfd: Likewise. * cpu-m9s12x.c: New. * cpu-m9s12xg.c: New. * elf32-m68hc12.c: Add S12X and XGATE co-processor support. Add option to offset S12 addresses into XGATE memory space. Fix carry bug in IMM16 (IMM8 low/high) relocate. * Makefile.am (ALL_MACHINES): Add cpu-m9s12x and cpu-m9s12xg. (ALL_MACHINES_CFILES): Likewise. * reloc.c: Add S12X relocs. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * gas/m68hc11/insns9s12x.s: New * gas/m68hc11/insns9s12x.d: New * gas/m68hc11/hexprefix.s: New * gas/m68hc11/hexprefix.d: New * gas/m68hc11/9s12x-exg-sex-tfr.s: New * gas/m68hc11/9s12x-exg-sex-tfr.d: New * gas/m68hc11/insns9s12xg.s: New * gas/m68hc11/insns9s12xg.d: New * gas/m68hc11/9s12x-mov.s: New * gas/m68hc11/9s12x-mov.d: New * gas/m68hc11/m68hc11.exp: Updated * gas/m68hc11/*.d: Brought in line with changed objdump output. * gas/all/gas.exp: XFAIL all hc11/12 targets for redef2,3. * gas/elf/elf.exp: XFAIL all hc11/12 targets for redef. * gas/elf/dwarf2-1.d: Skip for hc11/12 targets. * gas/elf/dwarf2-2.d: Likewise. * ld-m68hc11/xgate-link.s: New. * ld-m68hc11/xgate-link.d: New. * ld-m68hc11/xgate-offset.s: New. * ld-m68hc11/xgate-offset.d: New. * ld-m68hc11/xgate1.s: New. * ld-m68hc11/xgate1.d: New. * ld-m68hc11/xgate2.s: New. * ld-m68hc11/m68hc11.exp: Updated. * ld-m68hc11/*.d: Brought in line with changed objdump output. * ld-gc/gc.exp: Update CFLAGS for m68hc11. * ld-plugin/plugin.exp: Likewise. * ld-srec/srec.exp: XFAIL for m68hc11 and m68hc12. * configure.in: Add S12X and XGATE co-processor support to m68hc11 target. * disassemble.c: Likewise. * configure: Regenerate. * m68hc11-dis.c: Make objdump output more consistent, use hex instead of decimal and use 0x prefix for hex. * m68hc11-opc.c: Add S12X and XGATE opcodes. * dis-asm.h (print_insn_m9s12x): Prototype. (print_insn_m9s12xg): Prototype. * m68hc11.h (R_M68HC12_16B, R_M68HC12_PCREL_9, R_M68HC12_PCREL_10) R_M68HC12_HI8XG, R_M68HC12_LO8XG): New relocations. (E_M68HC11_XGATE_RAMOFFSET): Define. * m68hc11.h: Add XGate definitions. (struct m68hc11_opcode): Add xg_mask field.
2012-05-14Add support for PowerPC VLE.James Lemke1-0/+2
2012-05-14 Catherine Moore <clm@codesourcery.com> * NEWS: Mention PowerPC VLE port. 2012-05-14 James Lemke <jwlemke@codesourcery.com> Catherine Moore <clm@codesourcery.com> bfd/ * bfd.c (bfd_lookup_section_flags): Add section parm. * ecoff.c (bfd_debug_section): Remove flag_info initializer. * elf-bfd.h (bfd_elf_section_data): Move in section_flag_info. (bfd_elf_lookup_section_flags): Add section parm. * elf32-ppc.c (is_ppc_vle): New function. (ppc_elf_modify_segment_map): New function. (elf_backend_modify_segment_map): Define. (has_vle_insns): New define. * elf32-ppc.h (ppc_elf_modify_segment_map): Declare. * elflink.c (bfd_elf_lookup_section_flags): Add return value & parm. Move in logic to omit / include a section. * libbfd-in.h (bfd_link_info): Add section parm. (bfd_generic_lookup_section_flags): Likewise. * reloc.c (bfd_generic_lookup_section_flags): Likewise. * section.c (bfd_section): Move out section_flag_info. (BFD_FAKE_SECTION): Remove flag_info initializer. * targets.c (_bfd_lookup_section_flags): Add section parm. 2012-05-14 Catherine Moore <clm@codesourcery.com> bfd/ * archures.c (bfd_mach_ppc_vle): New. * bfd-in2.h: Regenerated. * cpu-powerpc.c (bfd_powerpc_archs): New entry for vle. * elf32-ppc.c (split16_format_type): New enumeration. (ppc_elf_vle_split16): New function. (HOWTO): Add entries for R_PPC_VLE relocations. (ppc_elf_reloc_type_lookup): Handle PPC_VLE relocations. (ppc_elf_section_flags): New function. (ppc_elf_lookup_section_flags): New function. (ppc_elf_section_processing): New function. (ppc_elf_check_relocs): Handle PPC_VLE relocations. (ppc_elf_relocation_section): Likewise. (elf_backend_lookup_section_flags_hook): Define. (elf_backend_section_flags): Define. (elf_backend_section_processing): Define. * elf32-ppc.h (ppc_elf_section_processing): Declare. * libbfd.h: Regenerated. * reloc.c (BFD_RELOC_PPC_VLE_REL8, BFD_RELOC_PPC_VLE_REL15, BFD_RELOC_PPC_VLE_REL24, BFD_RELOC_PPC_VLE_LO16A, BFD_RELOC_PPC_VLE_LO16D, BFD_RELOC_PPC_VLE_HI16A, BFD_RELOC_PPC_VLE_HI16D, BFD_RELOC_PPC_VLE_HA16A, BFD_RELOC_PPC_VLE_HA16D, BFD_RELOC_PPC_VLE_SDA21, BFD_RELOC_PPC_VLE_SDA21_LO, BFD_RELOC_PPC_VLE_SDAREL_LO16A, BFD_RELOC_PPC_VLE_SDAREL_LO16D, BFD_RELOC_PPC_VLE_SDAREL_HI16A, BFD_RELOC_PPC_VLE_SDAREL_HI16D, BFD_RELOC_PPC_VLE_SDAREL_HA16A, BFD_RELOC_PPC_VLE_SDAREL_HA16D): New bfd relocations. 2012-05-14 James Lemke <jwlemke@codesourcery.com> gas/ * config/tc-ppc.c (insn_validate): New func of existing code to call.. (ppc_setup_opcodes): ..from 2 places here. Revise for second (VLE) opcode table. Add #ifdef'd code to print opcode tables. 2012-05-14 James Lemke <jwlemke@codesourcery.com> gas/ * config/tc-ppc.c (ppc_setup_opcodes): Allow out-of-order for the VLE conditional branches. 2012-05-14 Catherine Moore <clm@codesourcery.com> Maciej W. Rozycki <macro@codesourcery.com> Rhonda Wittels <rhonda@codesourcery.com> gas/ * config/tc-ppc.c (PPC_VLE_SPLIT16A): New macro. (PPC_VLE_SPLIT16D): New macro. (PPC_VLE_LO16A): New macro. (PPC_VLE_LO16D): New macro. (PPC_VLE_HI16A): New macro. (PPC_VLE_HI16D): New macro. (PPC_VLE_HA16A): New macro. (PPC_VLE_HA16D): New macro. (PPC_APUINFO_VLE): New definition. (md_chars_to_number): New function. (md_parse_option): Check for combinations of little endian and -mvle. (md_show_usage): Document -mvle. (ppc_arch): Recognize VLE. (ppc_mach): Recognize bfd_mach_ppc_vle. (ppc_setup_opcodes): Print the opcode table if * config/tc-ppc.h (ppc_frag_check): Declare. * doc/c-ppc.texi: Document -mvle. * NEWS: Mention PowerPC VLE port. 2012-05-14 Catherine Moore <clm@codesourcery.com> gas/ * config/tc-ppc.h (ppc_dw2_line_min_insn_length): Declare. (DWARF2_LINE_MIN_INSN_LENGTH): Redefine. * config/tc-ppc.c (ppc_dw2_line_min_insn_length): New. * dwarf2dbg.c (scale_addr_delta): Handle values of 1 for DWARF2_LINE_MIN_INSN_LENGTH. 2012-05-14 Catherine Moore <clm@codesourcery.com> Maciej W. Rozycki <macro@codesourcery.com> Rhonda Wittels <rhonda@codesourcery.com> gas/testsuite/ * gas/ppc/ppc.exp: Run new tests. * gas/ppc/vle-reloc.d: New test. * gas/ppc/vle-reloc.s: New test. * gas/ppc/vle-simple-1.d: New test. * gas/ppc/vle-simple-1.s: New test. * gas/ppc/vle-simple-2.d: New test. * gas/ppc/vle-simple-2.s: New test. * gas/ppc/vle-simple-3.d: New test. * gas/ppc/vle-simple-3.s: New test. * gas/ppc/vle-simple-4.d: New test. * gas/ppc/vle-simple-4.s: New test. * gas/ppc/vle-simple-5.d: New test. * gas/ppc/vle-simple-5.s: New test. * gas/ppc/vle-simple-6.d: New test. * gas/ppc/vle-simple-6.s: New test. * gas/ppc/vle.d: New test. * gas/ppc/vle.s: New test. 2012-05-14 James Lemke <jwlemke@codesourcery.com> include/elf/ * ppc.h (SEC_PPC_VLE): Remove. 2012-05-14 Catherine Moore <clm@codesourcery.com> James Lemke <jwlemke@codesourcery.com> include/elf/ * ppc.h (R_PPC_VLE_REL8): New reloction. (R_PPC_VLE_REL15): Likewise. (R_PPC_VLE_REL24): Likewise. (R_PPC_VLE_LO16A): Likewise. (R_PPC_VLE_LO16D): Likewise. (R_PPC_VLE_HI16A): Likewise. (R_PPC_VLE_HI16D): Likewise. (R_PPC_VLE_HA16A): Likewise. (R_PPC_VLE_HA16D): Likewise. (R_PPC_VLE_SDA21): Likewise. (R_PPC_VLE_SDA21_LO): Likewise. (R_PPC_VLE_SDAREL_LO16A): Likewise. (R_PPC_VLE_SDAREL_LO16D): Likewise. (R_PPC_VLE_SDAREL_HI16A): Likewise. (R_PPC_VLE_SDAREL_HI16D): Likewise. (R_PPC_VLE_SDAREL_HA16A): Likewise. (R_PPC_VLE_SDAREL_HA16D): Likewise. (SEC_PPC_VLE): Remove. (PF_PPC_VLE): New program header flag. (SHF_PPC_VLE): New section header flag. (vle_opcodes, vle_num_opcodes): New. (VLE_OP): New macro. (VLE_OP_TO_SEG): New macro. 2012-05-14 Catherine Moore <clm@codesourcery.com> Maciej W. Rozycki <macro@codesourcery.com> Rhonda Wittels <rhonda@codesourcery.com> include/opcode/ * ppc.h (PPC_OPCODE_VLE): New definition. (PPC_OP_SA): New macro. (PPC_OP_SE_VLE): New macro. (PPC_OP): Use a variable shift amount. (powerpc_operand): Update comments. (PPC_OPSHIFT_INV): New macro. (PPC_OPERAND_CR): Replace with... (PPC_OPERAND_CR_BIT): ...this and (PPC_OPERAND_CR_REG): ...this. 2012-05-14 James Lemke <jwlemke@codesourcery.com> ld/ * ldlang.c (walk_wild_consider_section): Don't copy section_flag_list. Pass it to callback. (walk_wild_section_general): Pass section_flag_list to callback. (lang_add_section): Add sflag_list parm. Move out logic to keep / omit a section & call bfd_lookup_section_flags. (output_section_callback_fast): Add sflag_list parm. Add new parm to lang_add_section calls. (output_section_callback): Likewise. (check_section_callback): Add sflag_list parm. (lang_place_orphans): Add new parm to lang_add_section calls. (gc_section_callback): Add sflag_list parm. (find_relro_section_callback): Likewise. * ldlang.h (callback_t): Add flag_info parm. (lang_add_section): Add sflag_list parm. * emultempl/armelf.em (elf32_arm_add_stub_section): Add lang_add_section parm. * emultempl/beos.em (gld*_place_orphan): Likewise. * emultempl/elf32.em (gld*_place_orphan): Likewise. * emultempl/hppaelf.em (hppaelf_add_stub_section): Likewise. * emultempl/m68hc1xelf.em (m68hc11elf_add_stub_section): Likewise. * emultempl/mipself.em (mips_add_stub_section): Likewise. * emultempl/mmo.em (mmo_place_orphan): Likewise. * emultempl/pe.em (gld_*_place_orphan): Likewise. * emultempl/pep.em (gld_*_place_orphan): Likewise. * emultempl/ppc64elf.em (ppc_add_stub_section): Likewise. * emultempl/spuelf.em (spu_place_special_section): Likewise. * emultempl/vms.em (vms_place_orphan): Likewise. 2012-05-14 James Lemke <jwlemke@codesourcery.com> ld/testsuite/ * ld-powerpc/powerpc.exp: Create ppceabitests. * ld-powerpc/vle-multiseg.s: New. * ld-powerpc/vle-multiseg-1.d: New. * ld-powerpc/vle-multiseg-1.ld: New. * ld-powerpc/vle-multiseg-2.d: New. * ld-powerpc/vle-multiseg-2.ld: New. * ld-powerpc/vle-multiseg-3.d: New. * ld-powerpc/vle-multiseg-3.ld: New. * ld-powerpc/vle-multiseg-4.d: New. * ld-powerpc/vle-multiseg-4.ld: New. * ld-powerpc/vle-multiseg-5.d: New. * ld-powerpc/vle-multiseg-5.ld: New. * ld-powerpc/vle-multiseg-6.d: New. * ld-powerpc/vle-multiseg-6.ld: New. * ld-powerpc/vle-multiseg-6a.s: New. * ld-powerpc/vle-multiseg-6b.s: New. * ld-powerpc/vle-multiseg-6c.s: New. * ld-powerpc/vle-multiseg-6d.s: New. * ld-powerpc/powerpc.exp: Run new tests. 2012-05-14 Catherine Moore <clm@codesourcery.com> ld/ * NEWS: Mention PowerPC VLE port. 2012-05-14 Catherine Moore <clm@codesourcery.com> ld/testsuite/ * ld-powerpc/apuinfo.rd: Update for VLE. * ld-powerpc/vle-reloc-1.d: New. * ld-powerpc/vle-reloc-1.s: New. * ld-powerpc/vle-reloc-2.d: New. * ld-powerpc/vle-reloc-2.s: New. * ld-powerpc/vle-reloc-3.d: New. * ld-powerpc/vle-reloc-3.s: New. * ld-powerpc/vle-reloc-def-1.s: New. * ld-powerpc/vle-reloc-def-2.s: New. * ld-powerpc/vle-reloc-def-3.s: New. 2012-05-14 James Lemke <jwlemke@codesourcery.com> opcodes/ * ppc-dis.c (get_powerpc_dialect): Use is_ppc_vle. (PPC_OPCD_SEGS, VLE_OPCD_SEGS): New defines. (vle_opcd_indices): New array. (lookup_vle): New function. (disassemble_init_powerpc): Revise for second (VLE) opcode table. (print_insn_powerpc): Likewise. * ppc-opc.c: Likewise. 2012-05-14 Catherine Moore <clm@codesourcery.com> Maciej W. Rozycki <macro@codesourcery.com> Rhonda Wittels <rhonda@codesourcery.com> Nathan Froyd <froydnj@codesourcery.com> opcodes/ * ppc-opc.c (insert_arx, extract_arx): New functions. (insert_ary, extract_ary): New functions. (insert_li20, extract_li20): New functions. (insert_rx, extract_rx): New functions. (insert_ry, extract_ry): New functions. (insert_sci8, extract_sci8): New functions. (insert_sci8n, extract_sci8n): New functions. (insert_sd4h, extract_sd4h): New functions. (insert_sd4w, extract_sd4w): New functions. (insert_vlesi, extract_vlesi): New functions. (insert_vlensi, extract_vlensi): New functions. (insert_vleui, extract_vleui): New functions. (insert_vleil, extract_vleil): New functions. (BI_MASK, BB_MASK, BT): Use PPC_OPERAND_CR_BIT. (BI16, BI32, BO32, B8): New. (B15, B24, CRD32, CRS): New. (CRD, OBF, BFA, CR, CRFS): Use PPC_OPERAND_CR_REG. (DB, IMM20, RD, Rx, ARX, RY, RZ): New. (ARY, SCLSCI8, SCLSCI8N, SE_SD, SE_SDH): New. (SH6_MASK): Use PPC_OPSHIFT_INV. (SI8, UI5, OIMM5, UI7, BO16): New. (VLESIMM, VLENSIMM, VLEUIMM, VLEUIMML): New. (XT6, XA6, XB6, XB6S, XC6): Use PPC_OPSHIFT_INV. (ALLOW8_SPRG): New. (insert_sprg, extract_sprg): Check ALLOW8_SPRG. (OPVUP, OPVUP_MASK OPVUP): New (BD8, BD8_MASK, BD8IO, BD8IO_MASK): New. (EBD8IO, EBD8IO1_MASK, EBD8IO2_MASK, EBD8IO3_MASK): New. (BD15, BD15_MASK, EBD15, EBD15_MASK, EBD15BI, EBD15BI_MASK): New. (BD24,BD24_MASK, C_LK, C_LK_MASK, C, C_MASK): New. (IA16, IA16_MASK, I16A, I16A_MASK, I16L, I16L_MASK): New. (IM7, IM7_MASK, LI20, LI20_MASK, SCI8, SCI8_MASK): New. (SCI8BF, SCI8BF_MASK, SD4, SD4_MASK): New. (SE_IM5, SE_IM5_MASK): New. (SE_R, SE_R_MASK, SE_RR, SE_RR_MASK): New. (EX, EX_MASK, BO16F, BO16T, BO32F, BO32T): New. (BO32DNZ, BO32DZ): New. (NO371, PPCSPE, PPCISEL, PPCEFS, MULHW): Include PPC_OPCODE_VLE. (PPCVLE): New. (powerpc_opcodes): Add new VLE instructions. Update existing instruction to include PPCVLE if supported. * ppc-dis.c (ppc_opts): Add vle entry. (get_powerpc_dialect): New function. (powerpc_init_dialect): VLE support. (print_insn_big_powerpc): Call get_powerpc_dialect. (print_insn_little_powerpc): Likewise. (operand_value_powerpc): Handle negative shift counts. (print_insn_powerpc): Handle 2-byte instruction lengths.
2012-05-03Add support for Motorola XGATE embedded CPUNick Clifton1-0/+2
2012-03-13gas/Roland McGrath1-33/+36
2012-03-12 Roland McGrath <mcgrathr@google.com> * config/tc-arm.c (arm_frag_max_var): New function. * config/tc-arm.h: Declare it. (md_frag_max_var): New macro. * config/tc-i386.c (i386_frag_max_var): New function. * config/tc-i386.h: Declare it. (md_frag_max_var): New macro. * doc/as.texinfo (Bundle directives): New node. (Pseudo Ops): Add it to the menu. * NEWS: Mention new feature. * read.c [md_frag_max_var] (HANDLE_BUNDLE): New macro. [HANDLE_BUNDLE] (bundle_align_p2): New variable. [HANDLE_BUNDLE] (bundle_lock_frchain, bundle_lock_frag): New variables. [HANDLE_BUNDLE] (start_bundle, pending_bundle_size, finish_bundle): New functions. (assemble_one): New function if [HANDLE_BUNDLE], #define directly to md_assembly if not. (read_a_source_file): Call assemble_one in place of md_assemble. (read_a_source_file) [HANDLE_BUNDLE]: Check for unterminated .bundle_lock at end of processing. [HANDLE_BUNDLE] (s_bundle_align_mode, s_bundle_lock, s_bundle_unlock): New functions. [HANDLE_BUNDLE] (potable): Add their entries. * read.h: Declare new functions. gas/testsuite/ 2012-03-12 Roland McGrath <mcgrathr@google.com> * gas/i386/bundle-bad.s: New file. * gas/i386/bundle-bad.d: New file. * gas/i386/bundle-bad.l: New file. * gas/i386/i386.exp: Run it. * gas/arm/bundle.s: New file. * gas/arm/bundle.d: New file. * gas/arm/bundle-lock.s: New file. * gas/arm/bundle-lock.d: New file. * gas/i386/bundle.s: New file. * gas/i386/bundle.d: New file. * gas/i386/x86-64-bundle.s: New file. * gas/i386/x86-64-bundle.d: New file. * gas/i386/bundle-lock.s: New file. * gas/i386/bundle-lock.d: New file. * gas/i386/i386.exp: Run them.
2011-11-02[.]DJ Delorie1-0/+2
* configure.ac (rl78-*-*) New case. * configure: Regenerate. [bfd] * Makefile.am (ALL_MACHINES): Add cpu-rl78.lo. (ALL_MACHINES_CFILES): Add cpu-rl78.c. (BFD32_BACKENDS): Add elf32-rl78.lo. (BFD32_BACKENDS_CFILES): Add elf32-rl78.c. (Makefile.in): Regenerate. * archures.c (bfd_architecture): Define bfd_arch_rl78. (bfd_archures_list): Add bfd_rl78_arch. * config.bfd: Add rl78-*-elf. * configure.in: Add bfd_elf32_rl78_vec. * reloc.c (bfd_reloc_code_type): Add BFD_RELOC_RL78_* relocations. * targets.c (bfd_target_vector): Add bfd_elf32_rl78_vec. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * cpu-rl78.c: New file. * elf32-rl78.c: New file. [binutils] * readelf.c: Include elf/rl78.h (guess_is_rela): Handle EM_RL78. (dump_relocations): Likewise. (get_machine_name): Likewise. (is_32bit_abs_reloc): Likewise. * NEWS: Mention addition of RL78 support. * MAINTAINERS: Add myself as RL78 port maintainer. [gas] * Makefile.am (TARGET_CPU_CFILES): Add tc-rl78.c. (TARGET_CPU_HFILES): Add rc-rl78.h. (EXTRA_DIST): Add rl78-parse.c and rl78-parse.y. (rl78-parse.c, rl78-parse.h, rl78-parse.o, rl78-defs.h): New rules. * Makefile.in: Regenerate. * configure.in: Add rl78 case. * configure: Regenerate. * configure.tgt: Add rl78 case. * config/rl78-defs.h: New file. * config/rl78-parse.y: New file. * config/tc-rl78.c: New file. * config/tc-rl78.h: New file. * NEWS: Add Renesas RL78. * doc/Makefile.am (c-rl78.texi): New. * doc/Makefile.in: Likewise. * doc/all.texi: Enable it. * doc/as.texi: Add it. [include] * dis-asm.h (print_insn_rl78): Declare. [include/elf] * common.h (EM_RL78, EM_78K0R): New. * rl78.h: New. [include/opcode] * rl78.h: New file. [ld] * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32rl78.c. (+eelf32rl78.c): New rule. * Makefile.in: Regenerate. * configure.tgt: Add rl78-*-* case. * emulparams/elf32rl78.sh: New file. * NEWS: Mention addition of Renesas RL78 support. [opcodes] * Makefile.am (TARGET_LIBOPCODES_CFILES): Add rl78-decode.c and rl78-dis.c. (MAINTAINERCLEANFILES): Add rl78-decode.c. (rl78-decode.c): New rule, built from rl78-decode.opc and opc2c. * Makefile.in: Regenerate. * configure.in: Add bfd_rl78_arch case. * configure: Regenerate. * disassemble.c: Define ARCH_rl78. (disassembler): Add ARCH_rl78 case. * rl78-decode.c: New file. * rl78-decode.opc: New file. * rl78-dis.c: New file.
2011-10-28Mention Tilera support in binutils/NEWS, and fix the TILEProWalter Lee1-1/+1
capitalization in gas/NEWs and ld/NEWS.
2011-10-25bfd:Nick Clifton1-0/+2
* Makefile.am (ALL_MACHINES): Add cpu-epiphany.lo . (ALL_MACHINES_CFILES): Add cpu-epiphany.c . (BFD32_BACKENDS): Add elf32-epiphany.lo . (BFD32_BACKENDS_CFILES): Add elf32-epiphany.c . * Makefile.in, bfd-in2.h, configure, libbfd.h: Regenerate. * archures.c (bfd_arch_epiphany): Add. (bfd_mach_epiphany16, bfd_mach_epiphany32): Define. (bfd_epiphany_arch): Declare. (bfd_archures_list): Add &bfd_epiphany_arch. * config.bfd (epiphany-*-elf): New target case. * configure.in (bfd_elf32_epiphany_vec): New target vector case. * reloc.c (BFD_RELOC_EPIPHANY_SIMM8): New relocation. (BFD_RELOC_EPIPHANY_SIMM24, BFD_RELOC_EPIPHANY_HIGH): Likewise. (BFD_RELOC_EPIPHANY_LOW, BFD_RELOC_EPIPHANY_SIMM11): Likewise. (BFD_RELOC_EPIPHANY_IMM11, BFD_RELOC_EPIPHANY_IMM8): Likewise. * targets.c (bfd_elf32_epiphany_vec): Declare. (_bfd_target_vector): Add bfd_elf32_epiphany_vec. * po/SRC-POTFILES.in, po/bfd.pot: Regenerate. * cpu-epiphany.c, elf32-epiphany.c: New files. binutils: * readelf.c (include "elf/epiphany.h") (guess_is_rela, dump_relocation): Handle EM_ADAPTEVA_EPIPHANY. (get_machine_name, is_32bit_abs_reloc, is_32bit_pcrel_reloc): Likewise. (is_16bit_abs_reloc, is_none_reloc): Likewise. * po/binutils.pot: Regenerate. cpu: * cpu/epiphany.cpu, cpu/epiphany.opc: New files. gas: * NEWS: Mention addition of Adapteva Epiphany support. * config/tc-epiphany.c, config/tc-epiphany.h: New files. * Makefile.am (TARGET_CPU_CFILES): Add config/tc-epiphany.c . (TARGET_CPU_HFILES): Add config/tc-epiphany.h . * Makefile.in, configure, doc/Makefile.in, po/POTFILES.in: Regenerate. * configure.in: Also set using_cgen for epiphany. * configure.tgt: Handle epiphany. * doc/Makefile.am (CPU_DOCS): Add c-epiphany.texi . * doc/all.texi: Set EPIPHANY. * doc/as.texinfo: Add EPIPHANY-specific text. * doc/c-epiphany.texi: New file. * po/gas.pot: Regenerate. gas/testsuite: * gas/epiphany: New directory. include: * dis-asm.h (print_insn_epiphany): Declare. * elf/epiphany.h: New file. * elf/common.h (EM_ADAPTEVA_EPIPHANY): Define. ld: * NEWS: Mention addition of Adapteva Epiphany support. * Makefile.am (ALL_EMULATION_SOURCES): Add eelf32epiphany.c . (eelf32epiphany.c): New rule. * Makefile.in: Regenerate. * configure.tgt: Handle epiphany-*-elf. * po/ld.pot: Regenerate. * testsuite/ld-srec/srec.exp: xfail epiphany. * emulparams/elf32epiphany.sh: New file. opcodes: * Makefile.am (HFILES): Add epiphany-desc.h and epiphany-opc.h . (TARGET_LIBOPCODES_CFILES): Add epiphany-asm.c, epiphany-desc.c, epiphany-dis.c, epiphany-ibld.c and epiphany-opc.c . (CLEANFILES): Add stamp-epiphany. (EPIPHANY_DEPS): Set. Make CGEN-generated Epiphany files depend on it. (stamp-epiphany): New rule. * Makefile.in, configure, po/POTFILES.in, po/opcodes.pot: Regenerate. * configure.in: Handle bfd_epiphany_arch. * disassemble.c (ARCH_epiphany): Define. (disassembler): Handle bfd_arch_epiphany. * epiphany-asm.c, epiphany-desc.c, epiphany-desc.h: New files. * epiphany-dis.c, epiphany-ibld.c, epiphany-opc.c: Likewise. * epiphany-opc.h: Likewise.
2011-09-22binutils/Tristan Gingold1-0/+2
2011-09-22 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.22. gas/ 2011-09-22 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.22. ld/ 2011-09-22 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.22.
2011-06-15 * NEWS: Mention addition of TILEPRO and TIKE-Gx support.Nick Clifton1-1/+2
2010-11-05binutils/Tristan Gingold1-0/+3
2010-11-05 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.21. gas/ 2010-11-05 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.21. ld/ 2010-11-05 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.21.
2010-08-25Move gas/ld NEWS from binutils to gas/ld.H.J. Lu1-0/+2
2010-07-23Add support for v850E2 and v850E2V3Nick Clifton1-0/+2
2010-07-15 * gas/NEWS: Add note about --compress-debug-sections.Cary Coutant1-0/+5
* gas/as.c (show_usage): Add --compress-debug-sections and --nocompress-debug-sections.
2010-03-25bfd:Joseph Myers1-0/+2
* Makefile.am (ALL_MACHINES): Add cpu-tic6x.lo. (ALL_MACHINES_CFILES): Add cpu-tic6x.c. (BFD32_BACKENDS): Add elf32-tic6x.lo. (BFD32_BACKENDS_CFILES): Add elf32-tic6x.c. * Makefile.in: Regenerate. * archures.c (bfd_arch_tic6x, bfd_tic6x_arch): New. (bfd_archures_list): Update. * config.bfd (tic6x-*-elf): New. * configure.in (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec): New. * configure: Regenerate. * cpu-tic6x.c, elf32-tic6x.c: New. * reloc.c (BFD_RELOC_C6000_PCR_S21, BFD_RELOC_C6000_PCR_S12, BFD_RELOC_C6000_PCR_S10, BFD_RELOC_C6000_PCR_S7, BFD_RELOC_C6000_ABS_S16, BFD_RELOC_C6000_ABS_L16, BFD_RELOC_C6000_ABS_H16, BFD_RELOC_C6000_SBR_U15_B, BFD_RELOC_C6000_SBR_U15_H, BFD_RELOC_C6000_SBR_U15_W, BFD_RELOC_C6000_SBR_S16, BFD_RELOC_C6000_SBR_L16_B, BFD_RELOC_C6000_SBR_L16_H, BFD_RELOC_C6000_SBR_L16_W, BFD_RELOC_C6000_SBR_H16_B, BFD_RELOC_C6000_SBR_H16_H, BFD_RELOC_C6000_SBR_H16_W, BFD_RELOC_C6000_SBR_GOT_U15_W, BFD_RELOC_C6000_SBR_GOT_L16_W, BFD_RELOC_C6000_SBR_GOT_H16_W, BFD_RELOC_C6000_DSBT_INDEX, BFD_RELOC_C6000_PREL31, BFD_RELOC_C6000_COPY, BFD_RELOC_C6000_ALIGN, BFD_RELOC_C6000_FPHEAD, BFD_RELOC_C6000_NOCMP): New. * targets.c (bfd_elf32_tic6x_be_vec, bfd_elf32_tic6x_le_vec): New. (_bfd_target_vector): Update. * bfd-in2.h, libbfd.h: Regenerate. binutils: * MAINTAINERS: Add self as TI C6X maintainer. * NEWS: Add news entry for TI C6X support. * readelf.c: Include elf/tic6x.h. (guess_is_rela): Handle EM_TI_C6000. (dump_relocations): Likewise. (get_tic6x_dynamic_type): New. (get_dynamic_type): Call it. (get_machine_flags): Handle EF_C6000_REL. (get_osabi_name): Handle machine-specific values only for relevant machines. Handle C6X values. (get_tic6x_segment_type): New. (get_segment_type): Call it. (get_tic6x_section_type_name): New. (get_section_type_name): Call it. (is_32bit_abs_reloc, is_16bit_abs_reloc, is_none_reloc): Handle EM_TI_C6000. gas: * Makefile.am (TARGET_CPU_CFILES): Add config/tc-tic6x.c. (TARGET_CPU_HFILES): Add config/tc-tic6x.h. * Makefile.in: Regenerate. * NEWS: Add news entry for TI C6X support. * app.c (do_scrub_chars): Handle "||^" for TI C6X. Handle TC_PREDICATE_START_CHAR and TC_PREDICATE_END_CHAR. Keep spaces in operands if TC_KEEP_OPERAND_SPACES. * configure.tgt (tic6x-*-*): New. * config/tc-ia64.h (TC_PREDICATE_START_CHAR, TC_PREDICATE_END_CHAR): Define. * config/tc-tic6x.c, config/tc-tic6x.h: New. * doc/Makefile.am (CPU_DOCS): Add c-tic6x.texi. * doc/Makefile.in: Regenerate. * doc/all.texi (TIC6X): Define. * doc/as.texinfo: Add TI C6X documentation. Include c-tic6x.texi. * doc/c-tic6x.texi: New. gas/testsuite: * gas/tic6x: New directory and testcases. include: * dis-asm.h (print_insn_tic6x): Declare. include/elf: * common.h (ELFOSABI_C6000_ELFABI, ELFOSABI_C6000_LINUX): Define. * tic6x.h: New. include/opcode: * tic6x-control-registers.h, tic6x-insn-formats.h, tic6x-opcode-table.h, tic6x.h: New. ld: * Makefile.am (ALL_EMULATIONS): Add eelf32_tic6x_be.o and eelf32_tic6x_le.o. (eelf32_tic6x_be.c, eelf32_tic6x_le.c): New. * NEWS: Add news entry for TI C6X support. * configure.tgt (tic6x-*-*): New. * emulparams/elf32_tic6x_be.sh, emulparams/elf32_tic6x_le.sh: New. ld/testsuite: * ld-elf/flags1.d, ld-elf/merge.d: XFAIL for tic6x-*-*. * ld-elf/sec-to-seg.exp: Set B_test_same_seg to 0 for tic6x-*-*. * ld-tic6x: New directory and testcases. opcodes: * Makefile.am (TARGET_LIBOPCODES_CFILES): Add tic6x-dis.c. * Makefile.in: Regenerate. * configure.in (bfd_tic6x_arch): New. * configure: Regenerate. * disassemble.c (ARCH_tic6x): Define if ARCH_all. (disassembler): Handle TI C6X. * tic6x-dis.c: New.
2010-01-27gas/ChangeLog:Dave Korn1-0/+5
* NEWS: Mention new feature. * config/obj-coff.c (obj_coff_section): Accept digits and use to override default section alignment power if specified. * doc/as.texinfo (.section directive): Update documentation. gas/testsuite/ChangeLog: * gas/pe/section-align-1.s: New test source file. * gas/pe/section-align-1.d: Likewise control script. * gas/pe/section-align-2.s: Likewise ... * gas/pe/section-align-2.d: ... and likewise. * gas/pe/pe.exp: Invoke new testcases.
2009-09-29bfdNick Clifton1-0/+2
* Makefile.am (ALL_MACHINES): Add cpu-rx.lo. (ALL_MACHINES_CFILES): Add cpu-rx.c. (BFD32_BACKENDS): Add elf32-rx.lo. (BFD32_BACKENDS_CFILES): Add elf32-rx.c. * archures.c (bfd_architecture): Add bfd_arch_rx and bfd_mach_rx. Export bfd_rx_arch. (bfd_archures_list): Add bfd_rx_arch. * config.bfd: Add entry for rx-*-elf. * configure.in: Add entries for bfd_elf32_rx_le_vec and bfd_elf32_rx_be_vec. * reloc.c: Add RX relocations. * targets.c: Add RX target vectors. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * cpu-rx.c: New file. * elf32-rx.c: New file. binutils * readelf.c: Add support for RX target. * MAINTAINERS: Add DJ and NickC as maintainers for RX. gas * Makefile.am: Add RX target. * configure.in: Likewise. * configure.tgt: Likewise. * read.c (do_repeat_with_expander): New function. * read.h: Provide a prototype for do_repeat_with_expander. * doc/Makefile.am: Add RX target documentation. * doc/all.texi: Likewise. * doc/as.texinfo: Likewise. * Makefile.in: Regenerate. * NEWS: Mention support for RX architecture. * configure: Regenerate. * doc/Makefile.in: Regenerate. * config/rx-defs.h: New file. * config/rx-parse.y: New file. * config/tc-rx.h: New file. * config/tc-rx.c: New file. * doc/c-rx.texi: New file. gas/testsuite * gas/rx: New directory. * gas/rx/*: New set of test cases. * gas/elf/section2.e-rx: New expected output file. * gas/all/gas.exp: Add support for RX target. * gas/elf/elf.exp: Likewise. * gas/lns/lns.exp: Likewise. * gas/macros/macros.exp: Likewise. include * dis-asm.h: Add prototype for print_insn_rx. include/elf * rx.h: New file. include/opcode * rx.h: New file. ld * Makefile.am: Add rules to build RX emulation. * configure.tgt: Likewise. * NEWS: Mention support for RX architecture. * Makefile.in: Regenerate. * emulparams/elf32rx.sh: New file. * emultempl/rxelf.em: New file. opcodes * Makefile.am: Add RX files. * configure.in: Add support for RX target. * disassemble.c: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * opc2c.c: New file. * rx-decode.c: New file. * rx-decode.opc: New file. * rx-dis.c: New file.
2009-09-04binutils/Tristan Gingold1-0/+3
2009-09-04 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.20. gas/ 2009-09-04 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.20. ld/ 2009-09-04 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.20.
2009-08-07Mention MicroBlaze.Michael Eager1-0/+2
2009-07-23 * config/obj-elf.c (obj_elf_type): Add code to support a type ofNick Clifton1-0/+4
gnu_unique_object. * doc/as.texinfo: Document new feature of .type directive. * NEWS: Mention support for gnu_unique_object symbol type. * common.h (STB_GNU_UNIQUE): Define. * NEWS: Mention the linker's support for symbols with a binding of STB_GNU_UNIQUE. * gas/elf/type.s: Add unique global symbol definition. * gas/elf/type.e: Add expected readelf output for global unique symbol. * elfcpp.h (enum STB): Add STB_GNU_UNIQUE. * readelf.c (get_symbol_binding): For Linux targeted files return UNIQUE for symbols with the STB_GNU_UNIQUE binding. * doc/binutils.texi: Document the meaning of the 'u' symbol binding in the output of nm and objdump --syms. * elf-bfd.h (struct elf_link_hash_entry): Add unique_global field. * elf.c (swap_out_syms): Set binding to STB_GNU_UNIQUE for symbols with the BSF_GNU_UNIQUE flag bit set. * elfcode.h (elf_slurp_symbol_table): Set the BSF_GNU_UNIQUE flag for symbols with STB_GNU_UNIQUE binding. * elflink.c (_bfd_elf_merge_symbol): Set unique_global for symbols with the STB_GNU_UNIQUE binding. (elf_link_add_object_symbols): Set the BSF_GNU_UNIQUE flag for symbols with STB_GNU_UNIQUE binding. Set STB_GNU_UNIQUE for symbols with the unique_global field set. (elf_link_output_extsym): Set unique_global field for symbols with the STB_GNU_UNIQUE binding. * syms.c (struct bfd_symbol): Define BSF_GNU_UNIQUE flag bit. (bfd_print_symbol_vandf): Print a 'u' character for BSF_GNU_UNIQUE symbols. (bfd_decode_symclass): Return a 'u' character for BSF_GNU_UNIQUE symbols. * bfd-in2.h: Regenerate.
2009-07-09 * config/tc-arm.c (it_fsm_post_encode): New forward declaration.Nick Clifton1-0/+2
(set_it_insn_type_nonvoid): New macro. (emit_thumb32_expr): New function. (thumb_insn_size): New function. (emit_insn): New function. (s_arm_elf_inst): New function. (md_pseudo_table): New pseudo-opcode entries added. * doc/c-arm.texi: New directive added. * gas/arm/inst-po.d: New testcase. * gas/arm/inst-po.s: New file. * gas/arm/inst-po-2.d: New testcase. * gas/arm/inst-po-2.s: New file. * gas/arm/inst-po-2.l: New file. * gas/arm/inst-po-3.d: New testcase. * gas/arm/inst-po-3.s: New file. * gas/arm/inst-po-be.d: New testcase.
2009-05-19==> bfd/ChangeLog <==Dave Korn1-0/+2
2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com> * cofflink.c (process_embedded_commands): Ignore "-aligncomm". ==> gas/ChangeLog <== 2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com> * NEWS: Mention new feature. * config/obj-coff.c (obj_coff_common_parse): New function. (obj_coff_comm): Likewise. (coff_pseudo_table): Override default ".comm" definition on PE. * doc/as.texinfo: Document new feature. ==> gas/testsuite/ChangeLog <== 2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com> * gas/pe/: New directory for PE format-specific tests. * gas/pe/aligncomm-a.d: New test pattern file. * gas/pe/aligncomm-a.s: New test source file. * gas/pe/aligncomm-b.d: New test pattern file. * gas/pe/aligncomm-b.s: New test source file. * gas/pe/aligncomm-c.d: New test pattern file. * gas/pe/aligncomm-c.s: New test source file. * gas/pe/aligncomm-d.d: New test pattern file. * gas/pe/aligncomm-d.s: New test source file. * gas/pe/pe.exp: New test control script. * lib/gas-defs.exp (is_pecoff_format): New function. ==> ld/ChangeLog <== 2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com> * NEWS: Mention new feature. * deffile.h (def_file_aligncomm): Add new struct definition. (def_file): Add new def_file_aligncomm member. * deffilep.y (%token): Add new ALIGNCOMM token. (command): Add production rule for ALIGNCOMM. (def_file_free): Free any chained def_file_aligncomm structs. (diropts[]): Add entry for '-aligncomm' .drectve command. (def_aligncomm): New grammar function. * ld.texinfo: Document new feature. * pe-dll.c (process_def_file): Rename from this ... (process_def_file_and_drectve): ... to this, updating all callers, and process any aligncomms chained to the def file after scanning all .drectve sections. (generate_edata): Updated to match. (pe_dll_build_sections): Likewise. ==> ld/testsuite/ChangeLog <== 2009-05-19 Dave Korn <dave.korn.cygwin@gmail.com> * ld-pe/aligncomm-1.c: New test source file. * ld-pe/aligncomm-2.c: Likewise. * ld-pe/aligncomm-3.c: Likewise. * ld-pe/aligncomm-4.c: Likewise. * ld-pe/aligncomm.d: New test pattern file. * ld-pe/direct.exp: Deleted, and content moved into ... * ld-pe/pe-run.exp: ... New common file for all PE run tests. * ld-pe/vers-script.exp: Deleted, and content merged into ... * ld-pe/pe-compile.exp: ... New common file for PE tests needing a compiler, adding aligned common tests. * ld-pe/pe.exp: Update header comment.
2009-04-30include/elfNick Clifton1-0/+5
2009-04-30 Nick Clifton <nickc@redhat.com> * common.h (STT_GNU_IFUNC): Define. elfcpp 2009-04-30 Nick Clifton <nickc@redhat.com> * (enum STT): Add STT_GNU_IFUNC. gas 2009-04-30 Nick Clifton <nickc@redhat.com> * config/obj-elf.c (obj_elf_type): Add support for a gnu_indirect_function type. * config/tc-i386.c (tc_i386_fix_adjustable): Do not adjust fixups against indirect function symbols. * doc/as.texinfo (.type): Document the support for the gnu_indirect_function symbol type. * NEWS: Mention the new feature. gas/testsuite 2009-04-30 Nick Clifton <nickc@redhat.com> * gas/elf/elf.exp: Extend type test to include an ifunc symbol. Provide an alternative test for targets which do not support ifunc symbols. (type.s): Add entry for an ifunc symbol. (type.e): Add ifunc entry to expected symbol dump. (section2.e-armelf): Add entry for ifunc symbol. (type-noifunc.s): New file. (type-noifunc.e): New file. bfd/ 2009-04-30 Nick Clifton <nickc@redhat.com> * elf-bfd.h (struct bfd_elf_section_data): Add indirect_relocs section pointer. (struct elf_obj_data): Add has_ifunc_symbols boolean. * elf.c (swap_out_syms): Convert BSF_GNU_INDIRECT_FUNCTION flags into a STT_GNU_IFUNC symbol type. (_bfd_elf_is_function_type): Accept STT_GNU_IFUNC as a function type. (_bfd_elf_set_osabi): Set the osasbi field to ELFOSABI_LINUX if the binary contains ifunc symbols. * elfcode.h (elf_slurp_symbol_table): Translate the STT_GNU_IFUNC symbol type into a BSF_GNU_INDIRECT_FUNCTION flag. * elf32-i386.c (is_indirect_function): New function. (elf_i386_check_relocs): Create an ifunc output section. (allocate_dynrelocs): Create dynamic relocs in the ifunc output section if necessary. (elf_i386_relocate_section): Emit a reloc against an ifunc symbol if necessary. (elf_i386_add_symbol_hook): New function. Set the has_ifunc_symbols field of the elf_obj_data structure if an ifunc symbol is encountered. (elf_backend_post_process_headers): Define. (elf_backend_add_symbol_hook): Define. (elf_i386_post_process_headers): Rename to elf_i388_fbsd_post_process_headers. * elf64-x86_64.c (IS_X86_64_PCREL_TYPE): New macro. (is_indirect_function): New function. (elf64_x86_64_check_relocs): Create an ifunc output section. (allocate_dynrelocs): Create dynamic relocs in the ifunc output section if necessary. (elf64_x86_64_relocate_section): Emit a reloc against an ifunc symbol if necessary. (elf_i386_add_symbol_hook): Set the has_ifunc_symbols field of the elf_obj_data structure if an ifunc symbol is encountered. (elf_backend_post_process_headers): Define. * elflink.c (_bfd_elf_adjust_dynamic_symbol): Always create a PLT if we have ifunc symbols to handle. (get_ifunc_reloc_section_name): New function. Computes the name for an ifunc section. (_bfd_elf_make_ifunc_reloc_section): New function. Creates a section to hold ifunc relocs. * syms.c (BSF_GNU_INDIRECT_FUNCTION): Define. (bfd_print_symbol_vandf): Handle ifunc symbols. (bfd_decode_symclass): Likewise. * bfd-in2.h: Regenerate. binutils 2009-04-30 Nick Clifton <nickc@redhat.com> * readelf.c (dump_relocations): Display a relocation against an ifunc symbol as if it were a function invocation. (get_symbol_type): Handle STT_GNU_IFUNC. ld 2009-04-30 Nick Clifton <nickc@redhat.com> * NEWS: Mention support for IFUNC symbols. ld/testsuite 2009-04-30 Nick Clifton <nickc@redhat.com> * ld-ifunc: New directory. * ld-ifunc/ifunc.exp: New file: Run the IFUNC tests. * ld-ifunc/prog.c: New file. * ld-ifunc/lib.c: New file.
2009-04-24 * NEWS: Add item about discriminator support.Cary Coutant1-0/+3
* dwarf2dbg.h (struct dwarf2_line_info): Add discriminator field. * dwarf2dbg.c (current): Add discriminator field. (dwarf2_where): Copy discriminator value. (dwarf2_consume_line_info): Set discriminator to 0. (dwarf2_directive_loc): Process discriminator sub-op. (out_leb128): New function. (process_entries): Output DW_LNE_set_discriminator. * doc/as.texinfo: Add discriminator operand to .loc directive. * testsuite/gas/lns/lns-common-1.d: Add test for discriminator. * testsuite/gas/lns/lns-common-1.s: Likewise.
2009-03-02Add support for Score7 architecture.Nick Clifton1-0/+2
2008-12-23Add LM32 port.Nick Clifton1-0/+2
2008-12-23Remove STT_IFUNC support.Nick Clifton1-5/+0
2008-12-03include/elf/Nick Clifton1-0/+5
* common.h (STT_IFUNC): Define. elfcpp/ * elfcpp.h (enum STT): Add STT_IFUNC. bfd/ * syms.c (struct bfd_symbol): Add new flag BSF_INDIRECT_FUNCTION. Remove redundant flag BFD_FORT_COMM_DEFAULT_VALUE. Renumber flags to remove gaps. (bfd_print_symbol_vandf): Return 'i' for BSF_INDIRECT_FUNCTION. (bfd_decode_symclass): Likewise. * elf.c (swap_out_syms): Translate BSF_INDIRECT_FUNCTION into STT_IFUNC. (elf_find_function): Treat STT_IFUNC in the same way as STT_FUNC. (_bfd_elf_is_function_type): Likewise. * elf32-arm.c (arm_elf_find_function): Likewise. (elf32_arm_adjust_dynamic_symbol): Likewise. (elf32_arm_swap_symbol_in): Likewise. (elf32_arm_additional_program_headers): Likewise. * elf32-i386.c (is_indirect_symbol): New function. (elf_i386_check_relocs): Also generate dynamic relocs for relocations against STT_IFUNC symbols. (allocate_dynrelocs): Likewise. (elf_i386_relocate_section): Likewise. * elf64-x86-64.c (is_indirect_symbol): New function. (elf64_x86_64_check_relocs): Also generate dynamic relocs for relocations against STT_IFUNC symbols. (allocate_dynrelocs): Likewise. (elf64_x86_64_relocate_section): Likewise. * elfcode.h (elf_slurp_symbol_table): Translate STT_IFUNC into BSF_INDIRECT_FUNCTION. * elflink.c (_bfd_elf_adjust_dynamic_reloc_section): Add support for STT_IFUNC symbols. (get_ifunc_reloc_section_name): New function. (_bfd_elf_make_ifunc_reloc_section): New function. * elf-bfd.h (struct bfd_elf_section_data): Add indirect_relocs field. * bfd-in2.h: Regenerate. gas/ * config/obj-elf.c (obj_elf_type): Add support for STT_IFUNC type. * doc/as.texinfo: Document new feature. * NEWS: Mention new feature. gas/testsuite/ * gas/elf/type.s: Add test of STT_IFUNC symbol type. * gas/elf/type.e: Update expected disassembly. * gas/elf/elf.exp: Update grep of symbol types. ld/ * NEWS: Mention new feature. * pe-dll.c (process_def_file): Replace use of redundant BFD_FORT_COMM_DEFAULT_VALUE with 0. * scripttempl/elf.sc: Add .rel.ifunc.dyn and .rela.ifunc.dyn sections. ld/testsuite/ * ld-mips-elf/reloc-1-n32.d: Updated expected output for reloc descriptions. * ld-mips-elf/reloc-1-n64.d: Likewise. * ld-i386/ifunc.d: New test. * ld-i386/ifunc.s: Source file for the new test. * ld-i386/i386.exp: Run the new test.
2008-09-28 * NEWS: Mention .cfi_val_encoded_addr.Daniel Jacobowitz1-0/+3
2008-09-08ld/Tristan Gingold1-0/+3
2008-09-08 Tristan Gingold <gingold@adacore.com> * NEWS: Add a marker for the 2.19 features. gas/ 2008-09-08 Tristan Gingold <gingold@adacore.com> * NEWS: Add a marker for the 2.19 features. binutils/ 2008-09-08 Tristan Gingold <gingold@adacore.com> * NEWS: Add a marker for the 2.19 features.
2008-08-06* NEWS: Mention these changes.DJ Delorie1-0/+3
* config/tc-h8300.h (H_TICK_HEX): Define. * config/tc-h8300.c (OPTION_H_TICK_HEX): New. (md_longopts): Add "-h-tick-hex". (md_parse_option): Support it. * doc/c-h8300.texi (H8/300 Options): Document it. * doc/as.texinfo (Overview): Likewise. * config/tc-sh.h (H_TICK_HEX): Define. * config/tc-sh.c (OPTION_H_TICK_HEX): New. (md_longopts): Add "-h-tick-hex". (md_parse_option): Support it. * doc/c-sh.texi (SH Options): Document it. * doc/c-sh64.texi (SH64 Options): Document it. * doc/as.texinfo (Overview): Likewise.
2008-05-02gas/H.J. Lu1-1/+1
2008-05-02 H.J. Lu <hongjiu.lu@intel.com> * NEWS: Mention XSAVE, EPT and MOVBE. * config/tc-i386.c (cpu_arch): Add .movbe and .ept. (md_show_usage): Add .movbe and .ept. * doc/c-i386.texi: Add movbe and ept to -march=. Document .movbe and .ept. gas/testsuite/ 2008-05-02 H.J. Lu <hongjiu.lu@intel.com> * gas/i386/i386.exp: Run movbe, movbe-intel, inval-movbe, ept, ept-intel, inval-ept, x86-64-movbe, x86-64-movbe-intel, x86-64-inval-movbe. x86-64-ept, x86-64-ept-intel and x86-64-inval-ept. * gas/i386/arch-10.s: Add movbe and invept. * gas/i386/x86-64-arch-2.s: Likewise. * gas/i386/ept.d: New file * gas/i386/ept-intel.d: Likewise. * gas/i386/ept.s: Likewise. * gas/i386/inval-ept.l: Likewise. * gas/i386/inval-ept.s: Likewise. * gas/i386/inval-movbe.l: Likewise. * gas/i386/inval-movbe.s: Likewise. * gas/i386/movbe.d: Likewise. * gas/i386/movbe-intel.d: Likewise. * gas/i386/movbe.s: Likewise. * gas/i386/x86-64-inval-ept.l: Likewise. * gas/i386/x86-64-inval-ept.s: Likewise. * gas/i386/x86-64-inval-movbe.l: Likewise. * gas/i386/x86-64-inval-movbe.s: Likewise. * gas/i386/x86-64-ept.d: Likewise. * gas/i386/x86-64-ept-intel.d: Likewise. * gas/i386/x86-64-ept.s: Likewise. * gas/i386/x86-64-movbe.d: Likewise. * gas/i386/x86-64-movbe-intel.d: Likewise. * gas/i386/x86-64-movbe.s: Likewise. * gas/i386/arch-10.d: Updated. * gas/i386/arch-10-1.l: Likewise. * gas/i386/arch-10-2.l: Likewise. * gas/i386/arch-10-3.l: Likewise. * gas/i386/arch-10-4.l: Likewise. * gas/i386/x86-64-arch-2.d: Likewise. opcodes/ 2008-05-02 H.J. Lu <hongjiu.lu@intel.com> * i386-dis.c (MOVBE_Fixup): New. (Mo): Likewise. (PREFIX_0F3880): Likewise. (PREFIX_0F3881): Likewise. (PREFIX_0F38F0): Updated. (prefix_table): Add PREFIX_0F3880 and PREFIX_0F3881. Update PREFIX_0F38F0 and PREFIX_0F38F1 for movbe. (three_byte_table): Use PREFIX_0F3880 and PREFIX_0F3881. * i386-gen.c (cpu_flag_init): Add CPU_MOVBE_FLAGS and CPU_EPT_FLAGS. (cpu_flags): Add CpuMovbe and CpuEPT. * i386-opc.h (CpuMovbe): New. (CpuEPT): Likewise. (CpuLM): Updated. (i386_cpu_flags): Add cpumovbe and cpuept. * i386-opc.tbl: Add entries for movbe and EPT instructions. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.
2008-04-10gas/H.J. Lu1-0/+3
2008-04-10 H.J. Lu <hongjiu.lu@intel.com> * NEWS: Mention -msse-check=[none|error|warning]. * config/tc-i386.c (sse_check): New. (OPTION_MSSE_CHECK): Likewise. (md_assemble): Check SSE instructions if needed. (md_longopts): Add -msse-check. (md_parse_option): Handle OPTION_MSSE_CHECK. (md_show_usage): Show -msse-check=[none|error|warning]. * doc/c-i386.texi: Document -msse-check=[none|error|warning]. gas/testsuite/ 2008-04-10 H.J. Lu <hongjiu.lu@intel.com> * gas/i386/i386.exp: Run sse-check, sse-check-warn, sse-check-error, x86-64-sse-check, x86-64-sse-check-warn and x86-64-sse-check-error. * gas/i386/sse-check.d: New. * gas/i386/sse-check.s: Likewise. * gas/i386/sse-check-error.l: Likewise. * gas/i386/sse-check-error.s: Likewise. * gas/i386/sse-check-warn.d: Likewise. * gas/i386/sse-check-warn.e: Likewise. * gas/i386/x86-64-sse-check.d: Likewise. * gas/i386/x86-64-sse-check-error.l: Likewise. * gas/i386/x86-64-sse-check-error.s: Likewise. * gas/i386/x86-64-sse-check-warn.d: Likewise.
2008-04-10 * listing.c: Add -ag listing flag to show general information inNick Clifton1-0/+5
listings such as gas version, passed options, and time stamp. (listing_general_info): New function. (print_options): New function. (print_single_option): New function. (print_timestamp): New function. (MAX_DATELEN): Define. (listing_print): Add call to listing_general_info. * listing.h (LISTING_GENERAL): Define. (listing_print): Add new parameter. * as.c (show_usage): Print new switch. (parse_args): Parse new switch. (main): Pass command line on to listing_print. * NEWS: Mention this new feature. * doc/as.texinfo: Document the new sub-option. * gas/all/gas.exp: Check the performance of the -ag command line switch.
generated by cgit v1.1 at 2024-08-03 07:13:26 +0000