aboutsummaryrefslogtreecommitdiff
path: root/configure
AgeCommit message (Collapse)AuthorFilesLines
2023-01-06configure: remove dependencies on gmp and mpfr when gdb is disabledClément Chigot1-1/+3
Since 991180627851801f1999d1ebbc0e569a17e47c74, the configure checks about GMP and MPFR for gdb builds have been moved to the toplevel configure. However, it doesn't take into account the --disable-gdb option. Meaning that a build without gdb will require these libraries even if not needed. ChangeLog: * configure.ac: Skip GMP and MPFR when --disable-gdb is provided. * configure: Regenerate.
2022-12-21Use toplevel configure for GMP and MPFR for gdbAndrew Pinski1-8/+59
This patch uses the toplevel configure parts for GMP/MPFR for gdb. The only thing is that gdb now requires MPFR for building. Before it was a recommended but not required library. Also this allows building of GMP and MPFR with the toplevel directory just like how it is done for GCC. We now error out in the toplevel configure of the version of GMP and MPFR that is wrong. OK after GDB 13 branches? Build gdb 3 ways: with GMP and MPFR in the toplevel (static library used at that point for both) With only MPFR in the toplevel (GMP distro library used and MPFR built from source) With neither GMP and MPFR in the toplevel (distro libraries used) Changes from v1: * Updated gdb/README and gdb/doc/gdb.texinfo. * Regenerated using unmodified autoconf-2.69 Thanks, Andrew Pinski ChangeLog: * Makefile.def: Add configure-gdb dependencies on all-gmp and all-mpfr. * configure.ac: Split out MPC checking from MPFR. Require GMP and MPFR if the gdb directory exist. * Makefile.in: Regenerate. * configure: Regenerate. gdb/ChangeLog: PR bug/28500 * configure.ac: Remove AC_LIB_HAVE_LINKFLAGS for gmp and mpfr. Use GMPLIBS and GMPINC which is provided by the toplevel configure. * Makefile.in (LIBGMP, LIBMPFR): Remove. (GMPLIBS, GMPINC): Add definition. (INTERNAL_CFLAGS_BASE): Add GMPINC. (CLIBS): Exchange LIBMPFR and LIBGMP for GMPLIBS. * target-float.c: Make the code conditional on HAVE_LIBMPFR unconditional. * top.c: Remove code checking HAVE_LIBMPFR. * configure: Regenerate. * config.in: Regenerate. * README: Update GMP/MPFR section of the config options. * doc/gdb.texinfo: Likewise. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=28500
2022-11-15libsframe: add the SFrame libraryWeimin Pan1-1/+1
libsframe is a library that allows you to: - decode a .sframe section - probe and inspect a .sframe section - encode (and eventually write) a .sframe section. This library is currently being used by the linker, readelf, objdump. This library will also be used by the SFrame unwinder which is still to be upstream'd. The file include/sframe-api.h defines the user-facing APIs for decoding, encoding and probing .sframe sections. A set of error codes together with their error message strings are also defined. Endian flipping is performed automatically at read and write time, if cross-endianness is detected. ChangeLog: * Makefile.def: Add libsframe as new module with its dependencies. * Makefile.in: Regenerated. * binutils/Makefile.am: Add libsframe. * binutils/Makefile.in: Regenerated. * configure: Regenerated * configure.ac: Add libsframe to host_libs. * libsframe/Makefile.am: New file. * libsframe/Makefile.in: New file. * libsframe/aclocal.m4: New file. * libsframe/config.h.in: New file. * libsframe/configure: New file. * libsframe/configure.ac: New file. * libsframe/sframe-error.c: New file. * libsframe/sframe-impl.h: New file. * libsframe/sframe.c: New file. include/ChangeLog: * sframe-api.h: New file. testsuite/ChangeLog: * libsframe/testsuite/Makefile.am: New file. * libsframe/testsuite/Makefile.in: Regenerated. * libsframe/testsuite/libsframe.decode/Makefile.am: New file. * libsframe/testsuite/libsframe.decode/Makefile.in: Regenerated. * libsframe/testsuite/libsframe.decode/decode.exp: New file. * libsframe/testsuite/libsframe.encode/Makefile.am: Likewise. * libsframe/testsuite/libsframe.encode/Makefile.in: Regenerated. * libsframe/testsuite/libsframe.encode/encode.exp: New file. * libsframe/testsuite/libsframe.encode/encode-1.c: Likewise. * libsframe/testsuite/libsframe.decode/be-flipping.c: Likewise. * libsframe/testsuite/libsframe.decode/frecnt-1.c: Likewise. * libsframe/testsuite/libsframe.decode/frecnt-2.c: Likewise. * libsframe/testsuite/libsframe.decode/DATA-BE: New file. * libsframe/testsuite/libsframe.decode/DATA1: Likewise. * libsframe/testsuite/libsframe.decode/DATA2: Likewise.
2022-10-20Reapply "Don't build readline/libreadline.a, when --with-system-readline is ↵Дилян Палаузов1-0/+6
supplied" Commit 228cf97dd3c8 ("Merge configure.ac from gcc project") undid the change originally done in commit 69961a84c9b ("Don't build readline/libreadline.a, when --with-system-readline is supplied"). Re-apply it. Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=18632
2022-10-11Re-apply "Pass PKG_CONFIG_PATH down from top-level Makefile"Simon Marchi1-0/+2
Commit 228cf97dd3c8 ("Merge configure.ac from gcc project") undid the change originally done in de83289ef32e ("Pass PKG_CONFIG_PATH down from top-level Makefile"). Re-apply it. Change-Id: I91138dfca41c43b05e53e445f62e4b27882536bf
2022-10-12Re: Merge configure.ac from gcc projectAlan Modra1-4/+126
Also copy over config.acx.m4, and regenerate.
2022-10-11add --enable-default-compressed-debug-sections-algorithm configure optionMartin Liska1-0/+13
ChangeLog: * configure.ac: Add --enable-default-compressed-debug-sections-algorithm. * configure: Regenerate. gas/ChangeLog: * NEWS: Document the new option. * as.c (flag_compress_debug): Set default algorithm based on the configure option. * configure.ac: Add --enable-default-compressed-debug-sections-algorithm. * configure: Regenerate. * config.in: Likewise. ld/ChangeLog: * NEWS: Document the new option. * configure.ac: Add --enable-default-compressed-debug-sections-algorithm. * configure: Regenerate. * config.in: Likewise. * ldmain.c: Set default algorithm based on the configure option.
2022-10-10Merge configure.ac from gcc projectAlan Modra1-93/+3263
To merge with gcc's copy of configure.ac we need to revert changes to configure.ac in the following gcc commits: dc832fb39fc0 2022-08-25 fc259b522c0f 2022-06-25 Then reapply configure.ac changes in binutils from these binutils commits: 50ad1254d503 2021-01-09 bb368aad297f 2022-03-11 e5f2f7d901ee 2022-07-26 2cac01e3ffff 2022-09-26 Plus copy over gcc's config/ax_cxx_compile_stdcxx.m4, then regenerate configure.
2022-09-26binutils, gdb: support zstd compressed debug sectionsFangrui Song1-0/+10
PR29397 PR29563: Add new configure option --with-zstd which defaults to auto. If pkgconfig/libzstd.pc is found, define HAVE_ZSTD and support zstd compressed debug sections for most tools. * bfd: for addr2line, objdump --dwarf, gdb, etc * gas: support --compress-debug-sections=zstd * ld: support ELFCOMPRESS_ZSTD input and --compress-debug-sections=zstd * objcopy: support ELFCOMPRESS_ZSTD input for --decompress-debug-sections and --compress-debug-sections=zstd * gdb: support ELFCOMPRESS_ZSTD input. The bfd change references zstd symbols, so gdb has to link against -lzstd in this patch. If zstd is not supported, ELFCOMPRESS_ZSTD input triggers an error. We can avoid HAVE_ZSTD if binutils-gdb imports zstd/ like zlib/, but this is too heavyweight, so don't do it for now. ``` % ld/ld-new a.o ld/ld-new: a.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... % ld/ld-new a.o --compress-debug-sections=zstd ld/ld-new: --compress-debug-sections=zstd: ld is not built with zstd support % binutils/objcopy --compress-debug-sections=zstd a.o b.o binutils/objcopy: --compress-debug-sections=zstd: binutils is not built with zstd support % binutils/objcopy b.o --decompress-debug-sections binutils/objcopy: zstd.o: section .debug_abbrev is compressed with zstd, but BFD is not built with zstd support ... ```
2022-09-21configure: Pass CPPFLAGS_FOR_BUILD to subdirsTsukasa OI1-0/+3
Because CPPFLAGS_FOR_BUILD is used in some subdirectories (through bfd/warning.m4), not AC_SUBSTing the variable causes minor issues. Fortunately, it didn't cause severe errors but error messages related to @CPPFLAGS_FOR_BUILD@ (not AC_SUBSTed CPPFLAGS_FOR_BUILD variable passed to subdirectories through Makefile) remain in config.log. To avoid invalid invocation of preprocessor for build environment, we need to set proper CPPFLAGS_FOR_BUILD (may be empty) and pass it to subdirectories that need it. This is what this commit does. ChangeLog: * configure.ac: Pass CPPFLAGS_FOR_BUILD to subdirectories. * configure: Regenerate.
2022-08-10Disable year 2038 support on 32-bit hosts by defaultLuis Machado1-0/+22
With a recent import of gnulib, code has been pulled that tests and enables 64-bit time_t by default on 32-bit hosts that support it. Although gdb can use the gnulib support, bfd doesn't use gnulib and currently doesn't do these checks. As a consequence, if we have a 32-bit host that supports 64-bit time_t, we'll have a mismatch between gdb's notion of time_t and bfd's notion of time_t. This will lead to mismatches in the struct stat size, leading to memory corruption and crashes. This patch disables the year 2038 check for now, which makes things work reliably again. I'd consider this a temporary fix until we have proper bfd checks for the year 2038, if it makes sense. 64-bit hosts seems to be more common these days, so I'm not sure how important it is to have this support enabled and how soon we want to enable it. Thoughts?
2022-06-27[gdb/build] Fix build breaker with --enable-sharedTom de Vries1-2/+6
When building gdb with --enable-shared, I run into: ... ld: build/zlib/libz.a(libz_a-inffast.o): relocation R_X86_64_32S against \ `.rodata' can not be used when making a shared object; recompile with -fPIC ld: build/zlib/libz.a(libz_a-inflate.o): warning: relocation against \ `inflateResetKeep' in read-only section `.text' collect2: error: ld returned 1 exit status make[3]: *** [libbfd.la] Error 1 ... This is a regression since commit a08bdb159bb ("[gdb/build] Fix gdbserver build with -fsanitize=thread"). The problem is that a single case statement in configure is shared to handle special requirements for both the host libiberty and host zlib, which has the effect that only one is handled. Fix this by handling libiberty and zlib each in its own case statement. Build on x86_64-linux, with and without --enable-shared. ChangeLog: 2022-06-27 Tom de Vries <tdevries@suse.de> * configure.ac: Set extra_host_libiberty_configure_flags and extra_host_zlib_configure_flags in separate case statements. * configure: Regenerate.
2022-06-27[gdb/build] Fix gdbserver build with -fsanitize=threadTom de Vries1-1/+1
[ Copied from gcc commit 153689603fd ("[gdb/build] Fix gdbserver build with -fsanitize=thread"). ] When building gdbserver with -fsanitize=thread (added to CFLAGS/CXXFLAGS) we run into: ... ld: ../libiberty/libiberty.a(safe-ctype.o): warning: relocation against \ `__tsan_init' in read-only section `.text' ld: ../libiberty/libiberty.a(safe-ctype.o): relocation R_X86_64_PC32 \ against symbol `__tsan_init' can not be used when making a shared object; \ recompile with -fPIC ld: final link failed: bad value collect2: error: ld returned 1 exit status make[1]: *** [libinproctrace.so] Error 1 ... which looks similar to what is described in commit 78e49486944 ("[gdb/build] Fix gdbserver build with -fsanitize=address"). The gdbserver component builds a shared library libinproctrace.so, which uses libiberty and therefore requires the pic variant. The gdbserver Makefile is setup to use this variant, if available, but it's not there. Fix this by listing gdbserver in the toplevel configure alongside libcc1, as a component that needs the libiberty pic variant, setting: ... extra_host_libiberty_configure_flags=--enable-shared ... Tested on x86_64-linux. ChangeLog: 2022-06-27 Tom de Vries <tdevries@suse.de> * configure.ac: Build libiberty pic variant for gdbserver. * configure: Regenerate.
2022-04-08Pass PKG_CONFIG_PATH down from top-level MakefileSimon Marchi1-0/+2
[Sending to binutils, gdb-patches and gcc-patches, since it touches the top-level Makefile/configure] I have my debuginfod library installed in a non-standard location (/opt/debuginfod), which requires me to set PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config. If I just set it during configure: $ PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config ./configure --with-debuginfod $ make or $ ./configure --with-debuginfod PKG_CONFIG_PATH=/opt/debuginfod/lib/pkg-config $ make Then PKG_CONFIG_PATH is only present (and ignored) during the top-level configure. When running make (which runs gdb's and binutils' configure), PKG_CONFIG_PATH is not set, which results in their configure script not finding the library: checking for libdebuginfod >= 0.179... no configure: error: "--with-debuginfod was given, but libdebuginfod is missing or unusable." Change the top-level configure/Makefile system to capture the value passed when configuring the top-level and pass it down to subdirectories (similar to CFLAGS, LDFLAGS, etc). I don't know much about the top-level build system, so I really don't know if I did this correctly. The changes are: - Use AC_SUBST(PKG_CONFIG_PATH) in configure.ac, so that @PKG_CONFIG_PATH@ gets replaced with the actual PKG_CONFIG_PATH value in config files (i.e. Makefile) - Add a PKG_CONFIG_PATH Makefile variable in Makefile.tpl, initialized to @PKG_CONFIG_PATH@ - Add PKG_CONFIG_PATH to HOST_EXPORTS in Makefile.tpl, which are the variables set when running the sub-configures I initially added PKG_CONFIG_PATH to flags_to_pass, in Makefile.def, but I don't think it's needed. AFAIU, this defines the flags to pass down when calling "make" in subdirectories. We only need PKG_CONFIG_PATH to be passed down during configure. After that, it's captured in gdb/config.status, so even if a "make" causes a re-configure later (because gdb/configure has changed, for example), the PKG_CONFIG_PATH value will be remembered. ChangeLog: * configure.ac: Add AC_SUBST(PKG_CONFIG_PATH). * configure: Re-generate. * Makefile.tpl (HOST_EXPORTS): Pass PKG_CONFIG_PATH. (PKG_CONFIG_PATH): New. * Makefile.in: Re-generate. Change-Id: I91138dfca41c43b05e53e445f62e4b27882536bf
2022-03-11gprofng: a new GNU profilerVladimir Mezentsev1-0/+18
top-level * Makefile.def: Add gprofng module. * configure.ac: Add --enable-gprofng option. * src-release.sh: Add gprofng. * Makefile.in: Regenerate. * configure: Regenerate. * gprofng: New directory. binutils * MAINTAINERS: Add gprofng maintainer. * README-how-to-make-a-release: Add gprofng. include. * collectorAPI.h: New file. * libcollector.h: New file. * libfcollector.h: New file.
2021-09-28top-level configure: setup target_configdirs based on repositoryAndrew Burgess1-0/+10
The top-level configure script is shared between the gcc repository and the binutils-gdb repository. The target_configdirs variable in the configure.ac script, defines sub-directories that contain components that should be built for the target using the target tools. Some components, e.g. zlib, are built as both host and target libraries. This causes problems for binutils-gdb. If we run 'make all' in the binutils-gdb repository we end up trying to build a target version of the zlib library, which requires the target compiler be available. Often the target compiler isn't immediately available, and so the build fails. The problem with zlib impacted a previous attempt to synchronise the top-level configure scripts from gcc to binutils-gdb, see this thread: https://sourceware.org/pipermail/binutils/2019-May/107094.html And I'm in the process of importing libbacktrace in to binutils-gdb, which is also a host and target library, and triggers the same issues. I believe that for binutils-gdb, at least at the moment, there are no target libraries that we need to build. In the configure script we build three lists of things we want to build, $configdirs, $build_configdirs, and $target_configdirs, we also build two lists of things we don't want to build, $skipdirs and $noconfigdirs. We then remove anything that is in the lists of things not to build, from the list of things that should be built. My proposal is to add everything in target_configdirs into skipdirs, if the source tree doesn't contain a gcc/ sub-directory. The result is that for binutils-gdb no target tools or libraries will be built, while for the gcc repository, nothing should change. If a user builds a unified source tree, then the target tools and libraries should still be built as the gcc/ directory will be present. I've tested a build of gcc on x86-64, and the same set of target libraries still seem to get built. On binutils-gdb this change resolves the issues with 'make all'. ChangeLog: * configure: Regenerate. * configure.ac (skipdirs): Add the contents of target_configdirs if we are not building gcc.
2021-09-02Add support for the haiku operating system. These are the os support ↵Alexander von Gluck IV1-1/+1
patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time.
2021-05-29sim: leverage gnulibMike Frysinger1-0/+3
We use getline, so leverage gnulib to provide fallback implementation.
2021-05-04Replace AC_PROG_CC with AC_PROG_CC_C99 in top level configure file.Nick Clifton1-0/+177
2021-05-04 Nick Clifton <nickc@redhat.com> * configure.ac (AC_PROG_CC): Replace with AC_PROG_CC_C99. * configure: Regenerate.
2021-02-09Remove arm-symbianelfAlan Modra1-3/+0
* configure.ac: Delete arm*-*-symbianelf* entry. * configure: Regenerate. bfd/ * config.bfd (arm*-*-symbianelf*): Move from obsolete to removed. * configure.ac: Delete symbian entries. * elf-bfd.h (enum elf_target_os): Delete is_symbian. * elf32-arm.c: Remove symbian support. Formatting. * targets.c: Delete symbian entries. * configure: Regenerate. binutils/ * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Remove symbianelf. gas/ * Makefile.am (TARG_ENV_HFILES): Remove config/te-symbian.h. * config/tc-arm.c (elf32_arm_target_format): Remove TE_SYMBIAN support. * config/te-symbian.h: Delete. * configure.tgt: Remove arm-*-symbianelf*. * testsuite/gas/arm/arch4t-eabi.d: Don't mention symbianelf in target selection. * testsuite/gas/arm/arch4t.d: Likewise. * testsuite/gas/arm/got_prel.d: Likewise. * testsuite/gas/arm/mapdir.d: Likewise. * testsuite/gas/arm/mapmisc.d: Likewise. * testsuite/gas/arm/mapsecs.d: Likewise. * testsuite/gas/arm/mapshort-eabi.d: Likewise. * testsuite/gas/arm/thumb-eabi.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumbrel.d: Likewise. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove earmsymbian.c. Don't include symbian dep file. * configure.tgt: Remove arm*-*-symbianelf* entry. * emulparams/armsymbian.sh: Delete. * ld.texi: Don't mention symbian. * scripttempl/armbpabi.sc: Delete. * testsuite/ld-arm/symbian-seg1.d: Delete. * testsuite/ld-arm/symbian-seg1.s: Delete. * testsuite/ld-arm/arm-elf.exp: Don't run symbian-seg1. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2021-01-11binuitils: Check if AR is usable for LTO buildH.J. Lu1-0/+4
Check if AR is usable for LTO build with --enable-pgo-build=lto: checking for -plugin option... ar: no operation specified Failed: ar --plugin /usr/gcc-11.0.0-x32/libexec/gcc/x86_64-pc-linux-gnu/11.0.0/liblto_plugin.so rc no configure: error: AR with --plugin and rc is required for LTO build instead of build failure later. PR binutils/26766 * configure.ac: * configure: Regenerated.
2021-01-11GCC: Check if AR works with --plugin and rcH.J. Lu1-0/+103
AR from older binutils doesn't work with --plugin and rc: [hjl@gnu-cfl-2 bin]$ touch foo.c [hjl@gnu-cfl-2 bin]$ ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c [hjl@gnu-cfl-2 bin]$ ./ar --plugin /usr/libexec/gcc/x86_64-redhat-linux/10/liblto_plugin.so rc libfoo.a foo.c ./ar: no operation specified [hjl@gnu-cfl-2 bin]$ ./ar --version GNU ar (Linux/GNU Binutils) 2.29.51.0.1.20180112 Copyright (C) 2018 Free Software Foundation, Inc. This program is free software; you may redistribute it under the terms of the GNU General Public License version 3 or (at your option) any later version. This program has absolutely no warranty. [hjl@gnu-cfl-2 bin]$ Check if AR works with --plugin and rc before passing --plugin to AR and RANLIB. PR ld/27173 * configure: Regenerated. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Check if AR works with --plugin and rc before enabling --plugin. config/ PR ld/27173 * gcc-plugin.m4 (GCC_PLUGIN_OPTION): Check if AR works with --plugin and rc before enabling --plugin. libiberty/ PR ld/27173 * configure: Regenerated. zlib/ PR ld/27173 * configure: Regenerated.
2021-01-09Support the PGO build for binutils+gdbH.J. Lu1-2/+98
Add the --enable-pgo-build[=lto] configure option. When binutils+gdb is not built together with GCC, --enable-pgo-build enables the PGO build: 1. First build with -fprofile-generate. 2. Use "make maybe-check-*" to generate profiling data and pass -i to make to ignore errors when generating profiling data. 3. Use "make clean" to remove the previous build. 4. Rebuild with -fprofile-use. With --enable-pgo-build=lto, -flto=jobserver -ffat-lto-objects are used together with -fprofile-generate and -fprofile-use. Add '+' to the command line for recursive make to support -flto=jobserver -ffat-lto-objects. NB: --enable-pgo-build=lto enables the PGO build with LTO while --enable-lto enables LTO support in toolchain. PR binutils/26766 * Makefile.tpl (BUILD_CFLAGS): New. (CFLAGS): Append $(BUILD_CFLAGS). (CXXFLAGS): Likewise. (PGO_BUILD_GEN_FLAGS_TO_PASS): New. (PGO_BUILD_TRAINING_CFLAGS): Likewise. (PGO_BUILD_TRAINING_CXXFLAGS): Likewise. (PGO_BUILD_TRAINING_FLAGS_TO_PASS): Likewise. (PGO_BUILD_TRAINING_MFLAGS): Likewise. (PGO_BUILD_USE_FLAGS_TO_PASS): Likewise. (PGO-TRAINING-TARGETS): Likewise. (PGO_BUILD_TRAINING): Likewise. (all): Add '+' to the command line for recursive make. Support the PGO build. * configure.ac: Add --enable-pgo-build[=lto]. AC_SUBST PGO_BUILD_GEN_CFLAGS, PGO_BUILD_USE_CFLAGS and PGO_BUILD_LTO_CFLAGS. Enable the PGO build in Makefile. * Makefile.in: Regenerated. * configure: Likewise.
2021-01-09GCC: Pass --plugin to AR and RANLIBH.J. Lu1-0/+39
Detect GCC LTO plugin. Pass --plugin to AR and RANLIB to support LTO build. * Makefile.tpl (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. * configure.ac: Include config/gcc-plugin.m4. AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * libtool.m4 (_LT_CMD_OLD_ARCHIVE): Pass --plugin to AR and RANLIB if possible. * Makefile.in: Regenerated. * configure: Likewise. config/ * gcc-plugin.m4 (GCC_PLUGIN_OPTION): New. libiberty/ * Makefile.in (AR): Add @AR_PLUGIN_OPTION@ (RANLIB): Add @RANLIB_PLUGIN_OPTION@. (configure_deps): Depend on ../config/gcc-plugin.m4. * aclocal.m4: Include ../config/gcc-plugin.m4. * configure.ac: AC_SUBST AR_PLUGIN_OPTION and RANLIB_PLUGIN_OPTION. * configure: Regenerated. zlib/ * configure: Regenerated.
2020-07-24config/debuginfod.m4: Use PKG_CHECK_MODULESAaron Merey1-137/+2
Use PKG_CHECK_MODULES to set debuginfod autoconf vars. Also add pkg.m4 to config/. ChangeLog: * config/debuginfod.m4: use PKG_CHECK_MODULES. * config/pkg.m4: New file. * configure: Rebuild. * configure.ac: Remove AC_DEBUGINFOD. ChangeLog/binutils: * Makefile.am: Replace LIBDEBUGINFOD with DEBUGINFOD_LIBS. * Makefile.in: Rebuild. * configure: Rebuild. * doc/Makefile.in: Rebuild. ChangeLog/gdb: * Makefile.in: Replace LIBDEBUGINFOD with DEBUGINFOD_LIBS. * configure: Rebuild.
2020-04-21Since the pdp11-aout target does not support gdb, gdbserver or gprof these ↵Stephen Casner1-0/+3
should be excluded in configure. PR 25830 * configure.ac (noconfigdirs): Exclude gdb & gprof for pdp11. * configure: Rebuild.
2020-02-17Fix gdbserver-without-gdb buildTom Tromey1-7/+11
An earlier patch changed gdbserver to use the already-built top-level gnulib and gdbsupport. However, if one did a build that did not include gdb, then gdbserver would fail to build. The problem is that configure.ac only adds gnulib and gdbsupport to the build when gdb is being built. This patch fixes the problem by arranging for this to happen when gdbserver is built. ChangeLog 2020-02-17 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac (configdirs): Add gnulib and gdbsupport when building gdbserver.
2020-02-07Move gdbserver to top levelTom Tromey1-1/+20
This patch moves gdbserver to the top level. This patch is as close to a pure move as possible -- gdbserver still builds its own variant of gnulib and gdbsupport. Changing this will be done in a separate patch. [v2] Note that, per Simon's review comment, this patch changes the tree so that gdbserver is not built for or1k or score. This makes sense, because there is apparently not actually a gdbserver port here. [v3] This version of the patch also splits out some configury into a new file, gdbserver/configure.host, so that the top-level configure script can simply rely on it in order to decide whether gdbserver should be built. [v4] This version adds documentation and removes some unnecessary top-level dependencies. [v5] Update docs to mention "make all-gdbserver" and change how top-level configure decides whether to build gdbserver, switching to a single, shared script. Tested by the buildbot. ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> Pedro Alves <palves@redhat.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbserver. * gdbserver: New directory, moved from gdb/gdbserver. * configure.ac (host_tools): Add gdbserver. Only build gdbserver on certain systems. * Makefile.in, configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gdbserver. * MAINTAINERS: Add gdbserver. gdb/ChangeLog 2020-02-07 Tom Tromey <tom@tromey.com> * README: Update gdbserver documentation. * gdbserver: Move to top level. * configure.tgt (build_gdbserver): Remove. * configure.ac: Remove --enable-gdbserver. * configure: Rebuild. * Makefile.in (distclean): Don't mention gdbserver. Change-Id: I826b7565b54604711dc7a11edea0499cd51ff39e
2020-01-14Move gdbsupport to the top levelTom Tromey1-5/+5
This patch moves the gdbsupport directory to the top level. This is the next step in the ongoing project to move gdbserver to the top level. The bulk of this patch was created by "git mv gdb/gdbsupport gdbsupport". This patch then adds a build system to gdbsupport and wires it into the top level. Then it changes gdb to use the top-level build. gdbserver, on the other hand, is not yet changed. It still does its own build of gdbsupport. ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * src-release.sh (GDB_SUPPORT_DIRS): Add gdbsupport. * MAINTAINERS: Add gdbsupport. * configure: Rebuild. * configure.ac (configdirs): Add gdbsupport. * gdbsupport: New directory, move from gdb/gdbsupport. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * nat/x86-linux-dregs.c: Include configh.h. * nat/linux-ptrace.c: Include configh.h. * nat/linux-btrace.c: Include configh.h. * defs.h: Include config.h, bfd.h. * configure.ac: Don't source common.host. (CONFIG_OBS, CONFIG_SRCS): Remove gdbsupport files. * configure: Rebuild. * acinclude.m4: Update path. * Makefile.in (SUPPORT, LIBSUPPORT, INCSUPPORT): New variables. (CONFIG_SRC_SUBDIR): Remove gdbsupport. (INTERNAL_CFLAGS_BASE): Add INCSUPPORT. (CLIBS): Add LIBSUPPORT. (CDEPS): Likewise. (COMMON_SFILES): Remove gdbsupport files. (HFILES_NO_SRCDIR): Likewise. (stamp-version): Update path to create-version.sh. (ALLDEPFILES): Remove gdbsupport files. gdb/gdbserver/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * server.h: Include config.h. * gdbreplay.c: Include config.h. * configure: Rebuild. * configure.ac: Don't source common.host. * acinclude.m4: Update path. * Makefile.in (INCSUPPORT): New variable. (INCLUDE_CFLAGS): Add INCSUPPORT. (SFILES): Update paths. (version-generated.c): Update path to create-version.sh. (gdbsupport/%-ipa.o, gdbsupport/%.o): Update paths. gdbsupport/ChangeLog 2020-01-14 Tom Tromey <tom@tromey.com> * common-defs.h: Add GDBSERVER case. Update includes. * acinclude.m4, aclocal.m4, config.in, configure, configure.ac, Makefile.am, Makefile.in, README: New files. * Moved from ../gdb/gdbsupport/ Change-Id: I07632e7798635c1bab389bf885971e584fb4bb78
2020-01-09Add support for debuginfod to the binutils (disable by default, enabled via ↵Aaron Merey1-2/+137
a configure time option). debuginfod is a lightweight web service that indexes ELF/DWARF debugging resources by build-id and serves them over HTTP. This patch enables objdump and readelf to query debuginfod servers when they are otherwise not able to find separate debug files. Binutils can be built with debuginfod using the --with-debuginfod configure option. This requires that libdebuginfod be installed and found at configure time. debuginfod is packaged with elfutils, starting with version 0.178. For more information see https://sourceware.org/elfutils/. toplevel* config/debuginfod.m4: New file. Add macro AC_DEBUGINFOD. Adds new configure option --with-debuginfod. * configure: Regenerate. * configure.ac: Call AC_DEBUGINFOD. binutils* Makefile.am (readelf_LDADD, objdump_LDADD): Add libdebuginfod. * Makefile.in: Regenerate. * NEWS: Update. * config.in: Regenerate. * configure: Regenerate. * configure.ac: Call AC_DEBUGINFOD. * doc/Makefile.in: Regenerate. * doc/binutils.texi: Add section on using binutils with debuginfod. * dwarf.c (debuginfod_fetch_separate_debug_info): New function. Query debuginfod servers for the target debug file. (load_separate_debug_info): Call debuginfod_fetch_separate_debug_info if configured with debuginfod. (load_separate_debug_files): Add file argument to load_separate_debug_info calls. * dwarf.h (get_build_id): Add declaration. * objdump.c (get_build_id): New function. Get build-id of file. * readelf.c (get_build_id): Likewise. * testsuite/binutils-all/debuginfod.exp: New tests. * testsuite/binutils-all/linkdebug.s: Add .note.gnu.build-id section.
2019-08-19Add --with-static-standard-libraries to the top levelTom Tromey1-1/+23
gdb should normally not be linked with -static-libstdc++. Currently this has not caused problems, but it's incompatible with catching an exception thrown from a shared library -- and a subsequent patch changes gdb to do just this. This patch adds a new --with-static-standard-libraries flag to the top-level configure. It defaults to "auto", which means enabled if gcc is being built, and disabled otherwise. ChangeLog 2019-08-19 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Add --with-static-standard-libraries.
2019-06-14Move gnulib to top levelTom Tromey1-0/+8
This patch moves the gdb/gnulib subdirectory to the top level. It adjusts the top-level build system to build gnulib when necessary, and changes gdb to use this. However, gdbserver still builds its own copy of gnulib, just from the new source location. A small hack was needed to ensure that gnulib is only built when gdb is enabled. The Makefile only provides an ordering -- the directory must be mentioned in configdirs to actually be compiled at all. Most of the patch is just a "git mv" of gnulib, though a few minor path adjustments were needed in some files there. Tested by the buildbot. ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * MAINTAINERS: Add gnulib. * gnulib: New directory, move from gdb/gnulib. * configure.ac (host_libs): Add gnulib. * configure: Rebuild. * Makefile.def (host_modules, dependencies): Add gnulib. * Makefile.in: Rebuild. gdb/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * gnulib: Move directory to top-level. * configure.ac: Don't configure gnulib. * configure: Rebuild. * common/common-defs.h: Use new path to gnulib. * Makefile.in (GNULIB_BUILDDIR): Now ../gnulib. (GNULIB_H): Remove. (INCGNU): Look in new gnulib location. (HFILES_NO_SRCDIR): Remove gnulib files. (SUBDIR, REQUIRED_SUBDIRS): Remove gnulib. (generated_files): Remove GNULIB_H. ($(LIBGNU), all-lib): Remove targets. (distclean): Don't mention GNULIB_BUILDDIR. ($(GNULIB_BUILDDIR)/Makefile): Remove target. gdb/gdbserver/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * configure.ac: Use new path to gnulib. * configure: Rebuild. * Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path to gnulib. gnulib/ChangeLog 2019-06-14 Tom Tromey <tom@tromey.com> * update-gnulib.sh: Adjust paths. * Makefile.in: Adjust paths. * configure.ac: Adjust paths. Use ACX_LARGEFILE. * configure: Rebuild.
2019-06-03Revert patch that disables building libctf for non-ELF based targets.Nick Clifton1-16/+0
Revert: binutls 2019-05-29 Nick Clifton <nickc@redhat.com> * configure.ac (LIBCTF): Export. Set to empty for non-ELF based targets. (HAVE_LIBCTF): Define if libctf support is available. * Makefile.am (LIBCTF): Set value to @LIBCTF@. * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being defined. * readelf.c: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. * config.in: Regenerate. top 2019-05-29 Nick Clifton <nickc@redhat.com> * configure.ac (noconfigdirs): Add libctf if the target does not use the ELF file format. * configure: Regenerate.
2019-05-30Revert "Sync top level files with versions from gcc."Nick Clifton1-662/+1
This reverts commit f948b2de97884bfb4e5fc11d40a6bea9e0b096ae.
2019-05-29Sync top level files with versions from gcc.Nick Clifton1-1/+662
top * Makefile.def (target_modules): Add libphobos. (flags_to_pass): Add GDC, GDCFLAGS, GDC_FOR_TARGET and GDCFLAGS_FOR_TARGET. (dependencies): Make libphobos depend on libatomic, libbacktrace configure, and zlib configure. (language): Add language d. * Makefile.in: Rebuild. * Makefile.tpl (BUILD_EXPORTS): Add GDC and GDCFLAGS. (HOST_EXPORTS): Add GDC. (POSTSTAGE1_HOST_EXPORTS): Add GDC and GDC_FOR_BUILD. (BASE_TARGET_EXPORTS): Add GDC. (GDC_FOR_BUILD, GDC, GDCFLAGS): New variables. (GDC_FOR_TARGET, GDC_FLAGS_FOR_TARGET): New variables. (EXTRA_HOST_FLAGS): Add GDC. (STAGE1_FLAGS_TO_PASS): Add GDC. (EXTRA_TARGET_FLAGS): Add GDC and GDCFLAGS. * config-ml.in: Treat GDC and GDCFLAGS like other compiler/flag environment variables. * configure: Rebuild. * configure.ac: Add target-libphobos to target_libraries. Set and substitute GDC_FOR_BUILD and GDC_FOR_TARGET.
2019-05-29Do not build libctf for targets that do not use the ELF file format.Nick Clifton1-0/+16
top * configure.ac (noconfigdirs): Add libctf if the target does not use the ELF file format. * configure: Regenerate. binutils* configure.ac (LIBCTF): Export. Set to empty for non-ELF based targets. (HAVE_LIBCTF): Define if libctf support is available. * Makefile.am (LIBCTF): Set value to @LIBCTF@. * objdump.c: Make CTF code conditional upon HAVE_LIBCTF being defined. * readelf.c: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. * config.in: Regenerate.
2019-05-28libctf: build systemNick Alcock1-1/+1
This ties libctf into the build system, and makes binutils depend on it (used by the next commits). * Makefile.def (host_modules): Add libctf. * Makefile.def (dependencies): Likewise. libctf depends on zlib, libiberty, and bfd. * Makefile.in: Regenerated. * configure.ac (host_libs): Add libctf. * configure: Regenerated. libctf/ * Makefile.am: New. * Makefile.in: Regenerated. * config.h.in: Likewise. * aclocal.m4: Likewise. * configure: Likewise.
2019-01-03Don't build readline/libreadline.a, when --with-system-readline is suppliedДилян Палаузов1-0/+6
https://sourceware.org/bugzilla/show_bug.cgi?id=18632 The bundled libreadline is always built, even if the system is ./configure'd --with-system-readline and the build libreadline.a is not used. Proposed patch: Fix ./configure.ac not to proceed readline/, when --with-system- readline is provided
2018-06-29Introduce @unless/@endunless and postbootstrap Makefile targetsAlexandre Oliva1-5/+15
This patch turns dependencies of non-bootstrap targets on bootstrap targets for bootstrap builds into dependencies on stage_last. This arrangement gets stage1-bubble to run from stage_last if we haven't started a bootstrap yet, and to use the current stage otherwise. This was already the case of target libs, just not of non-bootstrapped host modules. In order to retain preexisting dependencies in non-bootstrap builds, or in gcc-less builds, this introduces support for @unless/@endunless pairs in Makefile.in. There is a remaining possibility of problem if activating, in a tree configured for bootstrap, a parallel build of two or more modules, at least one bootstrapped and one not. In this case, make might decide to build stage_current and stage_last in parallel, the latter will start a submake to build stage1 while the initial make, having satisfied stage_current, proceeds to build the bootstrapped module in non-bootstrapped configurations. The two builds will overlap and will likely conflict. This situation does NOT arise in normal settings, however: a post-bootstrap build of all-host all-target will indeed activate such targets concurrently, but only after building all bootstrapped modules successfully, and it will have both stage_last and stage_current targets already satisfied, so the potential race between builds will not arise. Another remaining problem, that is slightly expanded with this patch, is that of an interrupted build in a tree configured for bootstrap, continued with a non-bootstrapped target. Target modules that were not bootstrapped would already fail to complete the current stage when activated explicitly in the command line for a retry; host modules, however, would attempt to build their bootstrapped dependencies, which is what led to the problem of concurrent builds addressed with this patch. An interrupted or failed build might still recover correctly, if the non-bootstrapped target is activated in both builds, because then make will remove stage_last when its build command is interrupted, so that it will attempt to recreate it with stage1-bubble in the second try. A bootstrap build, however, will not be attempting to build stage_last, so the file will remain and the retry won't go through stage1-bubble. We have lived with that for target modules, so we can probably live with that for host modules too. Another undesirable consequence of this change is that non-boostrapped host modules, in a tree configured for bootstrap, when activated as make all-<module>, will build all of stage1 instead of only the module's usual dependencies. This is intentional and necessary to fix the parallel-build problem. If it's not desirable, disabling the unnecessary bootstrap configuration will suffice to restore the original set of dependencies. for ChangeLog * configure.ac: Introduce support for @unless/@endunless. * Makefile.tpl (dep-kind): Rewrite with cond; return postbootstrap in some cases. (make-postboot-dep, postboot-targets): New. (dependencies): Do not output postbootstrap dependencies at first. Output non-target ones changed for configure to depend on stage_last @if gcc-bootstrap, and the original deps @unless gcc-bootstrap. * configure.in, Makefile.in: Rebuilt.
2018-06-24Regenerate configure and pot files with updated binutils version number.Nick Clifton1-1/+0
2018-06-19Bump to autoconf 2.69 and automake 1.15.1Simon Marchi1-573/+656
When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
2018-06-19This was already applied on the GCC side.Eric Botcazou1-30/+0
* Makefile.def (fortran): Add check-target-libgomp-fortran. * Makefile.tpl (check-target-libgomp-fortran): New phony target. * Makefile.in: Regenerate. * configure: Regenerate.
2018-06-18config: Sync with GCCSimon Marchi1-1/+1
... and re-generate all possible configure files, since they may depend on things in config/. config/ChangeLog: Sync with GCC 2018-06-08 Martin Liska <mliska@suse.cz> * bootstrap-mpx.mk: Remove. 2018-05-10 Martin Liska <mliska@suse.cz> PR bootstrap/64914 * bootstrap-ubsan.mk: Define UBSAN_BOOTSTRAP. 2018-05-09 Joshua Watt <jpewhacker@gmail.com> * ax_pthread.m4: Add file. 2018-05-08 Richard Biener <rguenther@suse.de> PR bootstrap/85571 * bootstrap-lto-noplugin.mk: Disable compare. * bootstrap-lto.mk: Supply contrib/compare-lto for do-compare. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR bootstrap/85490 * bootstrap-cet.mk (STAGE4_CFLAGS): New. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR target/85485 * bootstrap-cet.mk (STAGE2_CFLAGS): Remove -mcet. (STAGE3_CFLAGS): Likewise. 2018-04-24 H.J. Lu <hongjiu.lu@intel.com> PR target/85485 * cet.m4 (GCC_CET_FLAGS): Replace -mcet with -mshstk. 2018-04-19 Jakub Jelinek <jakub@redhat.com> * cet.m4 (GCC_CET_FLAGS): Default to --disable-cet, replace --enable-cet=default with --enable-cet=auto. 2018-04-18 David Malcolm <dmalcolm@redhat.com> PR jit/85384 * acx.m4 (GCC_BASE_VER): Remove \$\$ from sed expression.
2018-05-01Add the Netronome Flow Processor as a build target to the top-level ↵Francois H. Theron1-0/+4
configure.ac file. * configure.ac: Added "nfp" target. * configure: Regenerate.
2018-02-13WebAssembly: Disable subdirectory configuration for unsupported LDMaciej W. Rozycki1-0/+3
Remove an LD subdirectory configuration error: *** ld does not support target wasm32-unknown-none *** see ld/configure.tgt for supported targets make[1]: *** [configure-ld] Error 1 which prevents binutils for the WebAssembly target from being built unless an explicit `--disable-ld' configuration option has been given. Users must not have to disable features selected by default to get a working configuration. / * configure.ac <wasm32-*-*> (noconfigdirs): Add `ld'. * configure: Regenerate.
2018-01-10Update top level configure files by synchronizing them with gcc.Nick Clifton1-134/+160
. * config-ml.in: Sync with gcc sources. * config.guess: Likewise. * config.sub: Likewise. * configure.ac: Likewise. * configure: Regenerate. config * Sync with GCC sources: 2017-11-14 Boris Kolpackov <boris@codesynthesis.com> * gcc-plugin.m4: Add support for MinGW. 2017-11-17 Igor Tsimbalist <igor.v.tsimbalist@intel.com> * cet.m4: New file. 2017-11-15 Alexandre Oliva <aoliva@redhat.com> * bootstrap-debug-lean.mk (do-compare): Use the contrib/compare-debug script. 2017-10-24 H.J. Lu <hongjiu.lu@intel.com> * bootstrap-cet.mk: New file. 2017-06-19 Martin Liska <mliska@suse.cz> * bootstrap-lto-noplugin.mk: Enable -flto in all PGO stages. * bootstrap-lto.mk: Likewise. 2017-06-03 Eric Botcazou <ebotcazou@adacore.com> * mt-android: New file. 2017-02-13 Richard Biener <rguenther@suse.de> * isl.m4: Remove support for ISL 0.14. 2017-01-19 Uros Bizjak <ubizjak@gmail.com> PR target/78478 * ax_check_define.m4: New file. 2017-01-17 Jakub Jelinek <jakub@redhat.com> PR other/79046 * acx.m4 (GCC_BASE_VER): New m4 function. (ACX_TOOL_DIRS): Require GCC_BASE_VER, for --with-gcc-major-version-only use just major number from BASE-VER. 2017-01-06 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE> PR go/78978 * hwcaps.m4 (GCC_CHECK_ASSEMBLER_HWCAP): New macro.
2017-12-12Add gdb for or1k buildStafford Horne1-7/+0
* ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> * configure.ac: Remove logic adding gdb to noconfigsdirs for or1k. * configure: Regenerate. Cc: gcc-patches@gcc.gnu.org
2017-01-23Sync top-level make and configure files with FSF GCC mainline versions.Nick Clifton1-402/+104
* configure.ac: Update year in copyright notice. Sync from FSF GCC mainline, bringing in the following patches. * Makefile.def: Likewise. * Makefile.tpl: Likewise. * configure: Regenerate. * Makefile.in: Regenerate. 2016-12-21 Jakub Jelinek <jakub@redhat.com> * configure.ac: Don't bootstrap libmpx unless --with-build-config includes bootstrap-mpx. 2016-12-01 Matthias Klose <doko@ubuntu.com> * configure.ac: Don't use pkg-config to check for bdw-gc. 2016-11-30 Matthias Klose <doko@ubuntu.com> * Makefile.def: Remove reference to boehm-gc target module. * configure.ac: Include pkg.m4, check for --with-target-bdw-gc options and for the bdw-gc pkg-config module. 2016-11-15 Matthias Klose <doko@ubuntu.com> * config-ml.in: Remove references to GCJ. * configure.ac: Likewise. 2016-09-30 Jakub Jelinek <jakub@redhat.com> * configure.ac: Add target-libffi to target_libraries. Readd libgcj target disablings, modified to only target-libffi. Readd target addition of go to unsupported languages. 2016-09-30 Andrew Haley <aph@redhat.com> * Makefile.def: Remove libjava. * Makefile.tpl: Likewise. * configure.ac: Likewise. 2016-09-26 Anton Kolesov <Anton.Kolesov@synopsys.com> * configure.ac: Disable "sim" directory for arc*-*-*. 2016-09-12 Maciej W. Rozycki <macro@imgtec.com> * configure.ac: Check for the minimum in-tree MPFR version handled.
2016-12-08sync binutils config/ with gccAlan Modra1-1/+1
config/ * acx.m4: Import from gcc. * bootstrap-asan.mk: Likewise. * multi.m4: Likewise. / * configure: Regnerate. gas/ * configure: Regnerate. ld/ * configure: Regnerate. libiberty/ * configure: Regnerate. zlib/ * configure: Regnerate.
2016-12-02Add support for Fushia OS.Josh Conner1-1/+1
* configure.ac: Add fuchsia to targets that use ELF. * configure: Regenerated. bfd * configure.tgt: Add support for fuchsia (OS). gas * configure.tgt: Add support for fuchsia (OS). ld * Makefile.am: Add dependency information for earmelf_fuchsia.c. * Makefile.in: Regenerate. * configure.tgt: Add support for aarch64-*-fuchsia, arm*-*-fuchsia*, and x86_64-*-fuchsia* targets. * emulparams/armelf_fuchsia.sh: New file. * emulparams/armelfb_fuchsia.sh: New file.