aboutsummaryrefslogtreecommitdiff
path: root/bfd/config.bfd
AgeCommit message (Collapse)AuthorFilesLines
2022-10-20Obsolete beosAlan Modra1-1/+2
* config.bfd: Obsolete *-*-beos*. Simplify x86 beos match.
2022-10-19aarch64-pe support for LD, GAS and BFDJedidiah Thompson1-2/+14
Allows aarch64-pe to be targeted natively, not having to use objcopy to convert it from ELF to PE. Based on initial work by Jedidiah Thompson Co-authored-by: Jedidiah Thompson <wej22007@outlook.com> Co-authored-by: Zac Walker <zac.walker@linaro.org>
2022-09-13Add pdb archive formatMark Harmstone1-2/+2
Resubmitted with changes in https://sourceware.org/pipermail/binutils/2022-September/122791.html made.
2022-09-02Add OpenBSD ARM Little Endian BFD support.Frederic Cambus1-2/+1
* config.bfd (arm-*-openbsd*): Restore target.
2022-08-22Add OpenBSD AArch64 Little Endian BFD support.Frederic Cambus1-0/+5
* config.bfd (aarch64-*-openbsd*): Add target.
2022-08-10bfd: Add support for LoongArch64 EFI (efi-*-loongarch64).Youling Tang1-1/+1
This adds support for efi-loongarch64 by virtue of adding a new PEI target pei-loongarch64. This is not a full target and only exists to support EFI at this time. This means that this target does not support relocation processing and is mostly a container format. This format has been added to elf based loongarch64 targets such that efi images can be made natively on Linux. However this target is not valid for use with gas but only with objcopy. We should't limit addresses to 32-bits for 64-bit vma, otherwise there will be "RVA truncated" error when using objcopy on loongarch64. With these changes the resulting file is recognized as an efi image. Any magic number is based on the Microsoft PE specification [1]. The test results are as follows: $ make check-binutils RUNTESTFLAGS='loongarch64.exp' PASS: Check if efi app format is recognized $ objdump -h -f tmpdir/loongarch64copy.o tmpdir/loongarch64copy.o: file format pei-loongarch64 architecture: Loongarch64, flags 0x00000132: EXEC_P, HAS_SYMS, HAS_LOCALS, D_PAGED start address 0x0000000000000000 Sections: Idx Name Size VMA LMA File off Algn 0 .text 0000003c 00000000200000b0 00000000200000b0 00000200 2**2 CONTENTS, ALLOC, LOAD, READONLY, CODE [1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format bfd: * .gitignore (pe-loongarch64igen.c): New. * Makefile.am (pei-loongarch64.lo, pe-loongarch64igen.lo, pei-loongarch64.c, pe-loongarch64igen.c): Add support. * Makefile.in: Likewise. * bfd.c (bfd_get_sign_extend_vma): Add pei-loongarch64. * coff-loongarch64.c: New file. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags, coff_write_object_contents) Add loongarch64 (loongarch64_pei_vec) support. * config.bfd: Likewise. * configure: Likewise. * configure.ac: Likewise. * libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE, GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE, GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT, GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE, GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT, GET_PDATA_ENTRY, _bfd_peLoongArch64_bfd_copy_private_bfd_data_common, _bfd_peLoongArch64_bfd_copy_private_section_data, _bfd_peLoongArch64_get_symbol_info, _bfd_peLoongArch64_only_swap_filehdr_out, _bfd_peLoongArch64_print_private_bfd_data_common, _bfd_peLoongArch64i_final_link_postscript, _bfd_peLoongArch64i_only_swap_filehdr_out, _bfd_peLoongArch64i_swap_aouthdr_in, _bfd_peLoongArch64i_swap_aouthdr_out, _bfd_peLoongArch64i_swap_aux_in, _bfd_peLoongArch64i_swap_aux_out, _bfd_peLoongArch64i_swap_lineno_in, _bfd_peLoongArch64i_swap_lineno_out, _bfd_peLoongArch64i_swap_scnhdr_out, _bfd_peLoongArch64i_swap_sym_in, _bfd_peLoongArch64i_swap_sym_out, _bfd_peLoongArch64i_swap_debugdir_in, _bfd_peLoongArch64i_swap_debugdir_out, _bfd_peLoongArch64i_write_codeview_record, _bfd_peLoongArch64i_slurp_codeview_record, _bfd_peLoongArch64_print_ce_compressed_pdata): New. * peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out, _bfd_XXi_swap_scnhdr_out, pe_print_pdata, _bfd_XX_print_private_bfd_data_common, _bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript): Support COFF_WITH_peLoongArch64, * pei-loongarch64.c: New file. * peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p): Support COFF_WITH_peLoongArch64. (jtab): Add dummy entry that traps. * targets.c (loongarch64_pei_vec): New. binutils * testsuite/binutils-all/loongarch64/loongarch64.exp: New file. * testsuite/binutils-all/loongarch64/pei-loongarch64.d: New test. * testsuite/binutils-all/loongarch64/pei-loongarch64.s: New test. include * coff/loongarch64.h: New file. * coff/pe.h (IMAGE_FILE_MACHINE_LOONGARCH64): New. Signed-off-by: Youling Tang <tangyouling@loongson.cn>
2022-06-27bfd: prune config.bfd's setting of targ_archsJan Beulich1-5/+1
The final "match all" case can take care of a few explicit entries: Purge those. Also move s12z* into proper position (the table is otherwise sorted, after all).
2022-06-27drop XC16x bitsJan Beulich1-4/+0
Commit 04f096fb9e25 ("Move the xc16x target to the obsolete list") moved the architecture from the "obsolete but still available" to the "obsolete / support removed" list in config.bfd, making the architecture impossible to enable (except maybe via "enable everything" options"). Note that I didn't touch */po/*.po{,t} on the assumption that these would be updated by some (half)automatic means.
2022-05-05cris bfd configAlan Modra1-2/+0
cris support will be built into a 32-bit bfd if using --enable-targets=all on a 32-bit host, so we may as well make targmatch.h include cris. * config.bfd (cris): Remove #idef BFD64.
2022-04-13binutils: enable PE on 32bit haiku buildAlexander von Gluck IV1-0/+1
* config.bfd (x86-haiku): Add i386_pei_vec as a selectable format.
2022-03-31x86: Remove bfd_arch_l1om and bfd_arch_k1omH.J. Lu1-28/+14
Remove bfd_arch_l1om and bfd_arch_k1om since L1OM/K1OM support has been removed from gas, ld and opcodes. bfd/ * Makefile.am (ALL_MACHINES): Remove cpu-l1om.lo and cpu-k1om.lo. (ALL_MACHINES_CFILES): Remove cpu-l1om.c and cpu-k1om.c. * archures.c (bfd_mach_l1om): Removed. (bfd_mach_l1om_intel_syntax): Likewise. (bfd_mach_k1om): Likewise. (bfd_mach_k1om_intel_syntax): Likewise. (bfd_k1om_arch): Likewise. (bfd_l1om_arch): Likewise. (bfd_archures_list): Remove bfd_k1om_arch and bfd_l1om_arch references. * config.bfd (targ_selvecs): Remove l1om_elf64_vec. l1om_elf64_fbsd_vec, k1om_elf64_vec and k1om_elf64_fbsd_vec. (targ_archs): Remove bfd_l1om_arch and bfd_k1om_arch. * configure.ac (k1om_elf64_vec): Removed. (k1om_elf64_fbsd_vec): Likewise. (l1om_elf64_vec): Likewise. (l1om_elf64_fbsd_vec): Likewise. * cpu-k1om.c: Removed. * cpu-l1om.c: Likewise. * elf64-x86-64.c (elf64_l1om_elf_object_p): Removed. (elf64_k1om_elf_object_p): Likewise. (l1om_elf64_vec): Removed. (l1om_elf64_fbsd_vec): Likewise. (k1om_elf64_vec): Likewise. (k1om_elf64_fbsd_vec): Likewise. (ELF_TARGET_OS): Undefine. * targets.c (_bfd_target_vector): Remove k1om_elf64_vec, k1om_elf64_fbsd_vec, l1om_elf64_vec and l1om_elf64_fbsd_vec. * Makefile.in: Regenerate. * bfd-in2.h: Likewise. * configure: Likewise. opcodes/ * configure.ac: Remove bfd_arch_l1om/bfd_arch_k1om references. * disassemble.c (disassembler): Likewise. * configure: Regenerate.
2022-03-16bfd: add AMDGCN architectureSimon Marchi1-0/+5
Add support for the AMDGCN architecture to BFD. This is the bare minimum to get $ ./configure --target=amdgcn-hsa-amdhsa --disable-gas $ make all-binutils working later in this series. The specific AMDGCN models added here are a bit arbitrary, based on what we intend to initially support in GDB. This list will need to be updated in the future anyway. The complete up-to-date list of existing AMDGPU models can be found here: https://llvm.org/docs/AMDGPUUsage.html#processors The ELF format for this architecture is documented here: https://llvm.org/docs/AMDGPUUsage.html#elf-code-object The flags for the "HSA" OS ABI are properly versioned and documented on that page. But the NONE, PAL and MESA3D OS ABIs are not well documented nor versioned. Taking a peek at the LLVM source code, we see that they encode their flags the same way as HSA v3. For example, for PAL: https://github.com/llvm/llvm-project/blob/c8b614cd74a92d85936aed5ac7c642af75ffdc29/llvm/lib/Target/AMDGPU/MCTargetDesc/AMDGPUTargetStreamer.cpp#L601 So at least, we know that all AMDGPU objects (of which AMDGCN objects are a subset of) at the time of writing encode the specific GPU model in the EF_AMDGPU_MACH field of e_flags. bfd/ChangeLog: * Makefile.am (ALL_MACHINES, ALL_MACHINES_CFILES): Add cpu-amdgcn.c. (BFD64_BACKENDS): Add elf64-amdgcn.lo. (BFD64_BACKENDS_CFILES): Add elf64-amdgcn.c. * Makefile.in: Re-generate. * cpu-amdgcn.c: New. * elf64-amdgcn.c: New. * archures.c (bfd_architecture): Add bfd_arch_amdgcn and related mach defines. (bfd_amdgcn_arch): New. (bfd_archures_list): Add bfd_amdgcn_arch. * bfd-in2.h: Re-generate. * config.bfd: Handle amdgcn* target. * configure.ac: Handle amdgcn_elf64_le_vec. * configure: Re-generate. * elf-bfd.h (elf_target_id): Add AMDGCN_ELF_DATA. * targets.c (amdgcn_elf64_le_vec): New. (_bfd_target_vector): Add amdgcn_elf64_le_vec. include/ChangeLog: * elf/amdgpu.h: New. * elf/common.h (ELFOSABI_AMDGPU_HSA): Add. Change-Id: I969f7b14960797e88891c308749a6e341eece5b2
2022-02-28Clarify the wording of the error message when an obsolete configuration is ↵Nick Clifton1-2/+2
encountered. PR 28886 * config.bfd: Update error message for obsolete configurations.
2022-02-09Update the obsolete list and how-to-make-a-release documentation now that ↵Nick Clifton1-3/+3
the 2.38 release is out.
2022-01-02Update year range in copyright notice of binutils filesAlan Modra1-1/+1
The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out */po/*.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.
2021-12-21Obsolete m32c-rtems and m32r-rtemsJoel Sherrill1-1/+1
2020-12-20 Joel Sherrill <joel@rtems.org> bfd/ * config.bfd (m32c-*-rtems*): Remove target. ld/ * configure.tgt (m32c-*-rtems*): Remove target. * configure.tgt (m32r-*-rtems*): Remove target.
2021-12-19Obsolete m32c-rtemsAlan Modra1-0/+1
2021-12-15loongarch32 build failure on 32-bit hostAlan Modra1-1/+1
gas/config/tc-loongarch.c: In function ‘assember_macro_helper’: gas/config/tc-loongarch.c:915:28: error: right shift count >= width of type [-Werror=shift-count-overflow] 915 | hi32 = insn->args[1] >> 32; | ^~ One possible fix is to make offsetT a 64-bit type for loongarch32. This also makes bfd/targmatch.h (generated from bfd/config.bfd) consistent since the loongarch32 match is inside #ifdef BFD64. * config.bfd (loongarch32-*): Set want64.
2021-11-23AArch64: Add support for AArch64 EFI (efi-*-aarch64).Tamar Christina1-2/+2
This adds support for efi-*-aarch64 by virtue of adding a new PEI target pei-aarch64-little. This is not a full target and only exists to support EFI at this time. This means that this target does not support relocation processing and is mostly a container format. This format has been added to elf based aarch64 targets such that efi images can be made natively on Linux. However this target is not valid for use with gas but only with objcopy. With these changes the resulting file is recognized as an efi image by third party tools: > pecli info hello.efi Metadata ================================================================================ MD5: 598c32a778b0f0deebe977fef8578c4e SHA1: 4580121edd5cb4dc40f51b28f171fd15250df84c SHA256: 3154bd7cf42433d1c957f6bf55a17ad8c57ed41b29df2d485703349fd6ff1d5c Imphash: Size: 47561 bytes Type: PE32+ executable (EFI application) (stripped to external PDB), for MS Windows Compile Time: 1970-01-01 00:00:00 (UTC - 0x0 ) Entry point: 0x2000 (section .text) Sections ================================================================================ Name RWX VirtSize VirtAddr RawAddr RawSize Entropy md5 .text R-X 0x5bb0 0x2000 0x400 0x5c00 6.39 551fbc264256a3f387de8a891500ae0d .reloc R-- 0xc 0x8000 0x6000 0x200 0.02 0c45f6d812d079821c1d54c09ab89e1d .data RW- 0x1d88 0x9000 0x6200 0x1e00 4.18 5d1137c09f01289dc62bf754f7290db3 .dynamic RW- 0xf0 0xb000 0x8000 0x200 0.34 5c94ed3206f05a277e6f04fbf131f131 .rela R-- 0xe58 0xc000 0x8200 0x1000 1.87 8b5c6bc30f3acb7ca7bf2e6789d68519 .dynsym R-- 0x138 0xd000 0x9200 0x200 0.96 bdcf5101da51aadc663ca8859f88138c Imports ================================================================================ Any magic number is based on the Microsoft PE specification [1]. [1] https://docs.microsoft.com/en-us/windows/win32/debug/pe-format bfd/ChangeLog: 2021-10-21 Tamar Christina <tamar.christina@arm.com> PR binutils/26206 * .gitignore (pe-aarch64igen.c): New. * Makefile.am (pei-aarch64.lo, pe-aarch64igen.lo, pei-aarch64.c, pe-aarch64igen.c): Add support. * Makefile.in: Likewise. * bfd.c (bfd_get_sign_extend_vma): Add pei-aarch64-little. * coff-aarch64.c: New file. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags, coff_write_object_contents) Add aarch64 (aarch64_pei_vec) support. * config.bfd: Likewise. * configure: Likewise. * configure.ac: Likewise. * libpei.h (GET_OPTHDR_IMAGE_BASE, PUT_OPTHDR_IMAGE_BASE, GET_OPTHDR_SIZE_OF_STACK_RESERVE, PUT_OPTHDR_SIZE_OF_STACK_RESERVE, GET_OPTHDR_SIZE_OF_STACK_COMMIT, PUT_OPTHDR_SIZE_OF_STACK_COMMIT, GET_OPTHDR_SIZE_OF_HEAP_RESERVE, PUT_OPTHDR_SIZE_OF_HEAP_RESERVE, GET_OPTHDR_SIZE_OF_HEAP_COMMIT, PUT_OPTHDR_SIZE_OF_HEAP_COMMIT, GET_PDATA_ENTRY, _bfd_peAArch64_bfd_copy_private_bfd_data_common, _bfd_peAArch64_bfd_copy_private_section_data, _bfd_peAArch64_get_symbol_info, _bfd_peAArch64_only_swap_filehdr_out, _bfd_peAArch64_print_private_bfd_data_common, _bfd_peAArch64i_final_link_postscript, _bfd_peAArch64i_only_swap_filehdr_out, _bfd_peAArch64i_swap_aouthdr_in, _bfd_peAArch64i_swap_aouthdr_out, _bfd_peAArch64i_swap_aux_in, _bfd_peAArch64i_swap_aux_out, _bfd_peAArch64i_swap_lineno_in, _bfd_peAArch64i_swap_lineno_out, _bfd_peAArch64i_swap_scnhdr_out, _bfd_peAArch64i_swap_sym_in, _bfd_peAArch64i_swap_sym_out, _bfd_peAArch64i_swap_debugdir_in, _bfd_peAArch64i_swap_debugdir_out, _bfd_peAArch64i_write_codeview_record, _bfd_peAArch64i_slurp_codeview_record, _bfd_peAArch64_print_ce_compressed_pdata): New. * peXXigen.c (_bfd_XXi_swap_aouthdr_in, _bfd_XXi_swap_aouthdr_out, pe_print_pdata, _bfd_XX_print_private_bfd_data_common, _bfd_XX_bfd_copy_private_section_data, _bfd_XXi_final_link_postscript): Support COFF_WITH_peAArch64, * pei-aarch64.c: New file. * peicode.h (coff_swap_scnhdr_in, pe_ILF_build_a_bfd, pe_ILF_object_p): Support COFF_WITH_peAArch64. (jtab): Add dummy entry that traps. * targets.c (aarch64_pei_vec): New. binutils/ChangeLog: 2021-10-21 Tamar Christina <tamar.christina@arm.com> PR binutils/26206 * NEWS: Add new support. * objcopy.c (convert_efi_target): Add efi-*-aarch64 support. * testsuite/binutils-all/aarch64/pei-aarch64-little.d: New test. * testsuite/binutils-all/aarch64/pei-aarch64-little.s: New test. include/ChangeLog: 2021-10-21 Tamar Christina <tamar.christina@arm.com> PR binutils/26206 * coff/aarch64.h: New file. * coff/pe.h (IMAGE_FILE_MACHINE_ARM64): New.
2021-10-24LoongArch bfd supportliuzhensong1-0/+15
2021-10-22 Chenghua Xu <xuchenghua@loongson.cn> Zhensong Liu <liuzhensong@loongson.cn> Weinan Liu <liuweinan@loongson.cn> bfd/ * Makefile.am: Add LoongArch. * archures.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * cpu-loongarch.c: New. * elf-bfd.h: Add LoongArch. * elf.c: Add LoongArch elfcore_grok_xxx. * elfnn-loongarch.c: New. * elfxx-loongarch.c: New. * elfxx-loongarch.h: New. * reloc.c: Add LoongArch BFD RELOC ENUM. * targets.c: Add LoongArch target. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * po/BLD-POTFILES.in: Regenerate. * po/SRC-POTFILES.in: Regenerate. include/ * elf/common.h: Add NT_LARCH_{CPUCFG,CSR,LSX,LASX}. * elf/loongarch.h: New.
2021-09-13Re: Deprecate a.out support for NetBSD targetsAlan Modra1-1/+2
* config.bfd: Correct m68-*-*bsd* obsolete target match.
2021-09-02Add support for the haiku operating system. These are the os support ↵Alexander von Gluck IV1-0/+34
patches we have been grooming and maintaining for quite a few years over on git.haiku-os.org. All of these architectures are working and most have been stable for quite some time.
2021-08-13ns32k configuryAlan Modra1-1/+4
Since ns32k-netbsd is as yet not removed, just marked obsolete, the target should still be accepted with --enable-obsolete. I also enabled ns32k-openbsd in ld since there doesn't seem to be a good reason why that target is not supported there but is elsewhere. bfd/ * config.bfd: Allow ns32k-netbsd. ld/ * configure.tgt: Allow ns32k-openbsd.
2021-08-11Deprecate a.out support for NetBSD targets.John Ericson1-15/+28
As discussed previously, a.out support is now quite deprecated, and in some cases removed, in both Binutils itself and NetBSD, so this legacy default makes little sense. `netbsdelf*` and `netbsdaout*` still work allowing the user to be explicit about there choice. Additionally, the configure script warns about the change as Nick Clifton requested. One possible concern was the status of NetBSD on NS32K, where only a.out was supported. But per [1] NetBSD has removed support, and if it were to come back, it would be with ELF. The binutils implementation is therefore marked obsolete, per the instructions in the last message. With that patch and this one applied, I have confirmed the following: --target=i686-unknown-netbsd --target=i686-unknown-netbsdelf builds completely --target=i686-unknown-netbsdaout properly fails because target is deprecated. --target=vax-unknown-netbsdaout builds completely except for gas, where the target is deprecated. [1]: https://mail-index.netbsd.org/tech-toolchain/2021/07/19/msg004025.html --- bfd/config.bfd | 43 +++++++++++++-------- bfd/configure.ac | 5 +-- binutils/testsuite/binutils-all/nm.exp | 2 +- binutils/testsuite/lib/binutils-common.exp | 7 +--- config/picflag.m4 | 4 +- gas/configure.tgt | 9 +++-- gas/testsuite/gas/arm/blx-bl-convert.d | 2 +- gas/testsuite/gas/arm/blx-local-thumb.d | 2 +- gas/testsuite/gas/sh/basic.exp | 2 +- gdb/configure.host | 34 +++++++---------- gdb/configure.tgt | 2 +- gdb/testsuite/gdb.asm/asm-source.exp | 6 +-- intl/configure | 2 +- ld/configure.tgt | 44 +++++++++++----------- ld/testsuite/ld-arm/arm-elf.exp | 4 +- ld/testsuite/ld-elf/elf.exp | 2 +- ld/testsuite/ld-elf/shared.exp | 4 +- libiberty/configure | 4 +-
2021-07-21Remove `netbsdpe` supportJohn Ericson1-4/+0
netbsdpe was deprecated in c2ce831330e10dab4703094491f80b6b9a5c2289. Since then, a release has passed (2.37), and it was marked obselete in 5c9cbf07f3f972ecffe13d858010b3179df17b32. Unless I am mistaken, that means we can now remove support altogether. All branches in the "active" code are remove, and the target is additionally marked as obsolete next to the other removed ones for libbfd and gdb. Per [1] from the NetBSD toolchain list, PE/COFF support was removed a decade ago. Furthermore, the sole mention of this target in the binutils commit history was in 2002. Together, I'm led to believe this target hasn't seen much attention in quite a while. [1]: https://mail-index.netbsd.org/tech-toolchain/2021/06/16/msg003996.html bfd/ * config.bfd: Remove netbsdpe entry. binutils/ * configure.ac: Remove netbsdpe entry. * testsuite/lib/binutils-common.exp (is_pecoff_format): Likewise. * configure: Regenerate. gas/ * configure.tgt: Remove netbsdpe entry. gdb/ * configure.tgt: Add netbsdpe to removed targets. ld/ * configure.tgt: Remove netbsdpe entry. * testsuite/ld-bootstrap/bootstrap.exp: Likewise.
2021-07-18Move pending-obsolesence targets onto the obsolete list.Nick Clifton1-6/+4
* config.bfd: Move pending obsoletion targets to obsolete list.
2021-06-29Add the netbsdpe configuration to the list of obsolete targets.Nick Clifton1-1/+1
* config.bfd (obsolete configurations): Add netbsdpe.
2021-06-09Fix the creation of archives for Sparc Solaris2 targets by eliminating the ↵Nick Clifton1-2/+3
support for generic SPARC ELF files. PR 27666 bfd * config.bfd: Do not add the sparc_elf32_vec or sparc_elf64_vec vectors to Sparc Solaris2 targets. ld * testsuite/ld-sparc/sparc.exp: Do not run the sparctests or sparc64tests for Solaris2 targets.
2021-02-11Remove ia64 from obsolete listAlan Modra1-1/+0
* config.bfd: Remove ia64 from obsolete list.
2021-02-09Remove arm-symbianelfAlan Modra1-5/+1
* configure.ac: Delete arm*-*-symbianelf* entry. * configure: Regenerate. bfd/ * config.bfd (arm*-*-symbianelf*): Move from obsolete to removed. * configure.ac: Delete symbian entries. * elf-bfd.h (enum elf_target_os): Delete is_symbian. * elf32-arm.c: Remove symbian support. Formatting. * targets.c: Delete symbian entries. * configure: Regenerate. binutils/ * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Remove symbianelf. gas/ * Makefile.am (TARG_ENV_HFILES): Remove config/te-symbian.h. * config/tc-arm.c (elf32_arm_target_format): Remove TE_SYMBIAN support. * config/te-symbian.h: Delete. * configure.tgt: Remove arm-*-symbianelf*. * testsuite/gas/arm/arch4t-eabi.d: Don't mention symbianelf in target selection. * testsuite/gas/arm/arch4t.d: Likewise. * testsuite/gas/arm/got_prel.d: Likewise. * testsuite/gas/arm/mapdir.d: Likewise. * testsuite/gas/arm/mapmisc.d: Likewise. * testsuite/gas/arm/mapsecs.d: Likewise. * testsuite/gas/arm/mapshort-eabi.d: Likewise. * testsuite/gas/arm/thumb-eabi.d: Likewise. * testsuite/gas/arm/thumb.d: Likewise. * testsuite/gas/arm/thumbrel.d: Likewise. * Makefile.in: Regenerate. * po/POTFILES.in: Regenerate. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove earmsymbian.c. Don't include symbian dep file. * configure.tgt: Remove arm*-*-symbianelf* entry. * emulparams/armsymbian.sh: Delete. * ld.texi: Don't mention symbian. * scripttempl/armbpabi.sc: Delete. * testsuite/ld-arm/symbian-seg1.d: Delete. * testsuite/ld-arm/symbian-seg1.s: Delete. * testsuite/ld-arm/arm-elf.exp: Don't run symbian-seg1. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2021-02-01Add Genode target supportEmery Hemingway1-3/+3
* configure.tgt: Add *-*-genode* as a target for AArch64 and x86.
2021-01-06sparc-sun-solaris2 and sparc64-sun-solaris2 configAlan Modra1-1/+2
A bunch of ld tests fail on these targets due to the test specifying -melf32_sparc or -melf64_sparc, which according to ld/configure.tgt are valid. However, config.bfd lacks the corresponding bfd target resulting in an error. Fix that by adding target_selvecs. bfd/ * config.bfd (sparc-*-solaris2*): Add sparc_elf32_vec. (sparc64-*-solaris2*): Add sparc_elf64_vec and sparc_elf32_vec. ld/ * testsuite/ld-sparc/sparc.exp (sparc64tests): Set text-segment base for some tests. * testsuite/ld-sparc/gotop32.dd: Match solaris output. * testsuite/ld-sparc/gotop32.sd: Likewise. * testsuite/ld-sparc/gotop32.td: Likewise. * testsuite/ld-sparc/gotop64.dd: Likewise. * testsuite/ld-sparc/gotop64.sd: Likewise. * testsuite/ld-sparc/gotop64.td: Likewise. * testsuite/ld-sparc/tlsg32.sd: Likewise. * testsuite/ld-sparc/tlsg64.sd: Likewise. * testsuite/ld-sparc/tlspie32.dd: Likewise. * testsuite/ld-sparc/tlspie64.dd: Likewise. * testsuite/ld-sparc/tlssunbin32.dd: Likewise. * testsuite/ld-sparc/tlssunbin32.sd: Likewise. * testsuite/ld-sparc/tlssunbin32.td: Likewise. * testsuite/ld-sparc/tlssunbin64.dd: Likewise. * testsuite/ld-sparc/tlssunbin64.sd: Likewise. * testsuite/ld-sparc/tlssunbin64.td: Likewise. * testsuite/ld-sparc/tlssunnopic32.dd: Likewise. * testsuite/ld-sparc/tlssunnopic32.sd: Likewise. * testsuite/ld-sparc/tlssunnopic64.dd: Likewise. * testsuite/ld-sparc/tlssunnopic64.sd: Likewise. * testsuite/ld-sparc/tlssunpic32.dd: Likewise. * testsuite/ld-sparc/tlssunpic32.sd: Likewise. * testsuite/ld-sparc/tlssunpic32.td: Likewise. * testsuite/ld-sparc/tlssunpic64.dd: Likewise. * testsuite/ld-sparc/tlssunpic64.sd: Likewise. * testsuite/ld-sparc/tlssunpic64.td: Likewise. * testsuite/ld-sparc/wdispcall.dd: Likewise.
2021-01-06RISC-V: Implement support for big endian targets.Marcus Comstedt1-2/+12
RISC-V instruction/code is always little endian, but data might be big-endian. Therefore, we can not use the original bfd_get/bfd_put to get/put the code for big endian targets. Add new riscv_get_insn and riscv_put_insn to always get/put code as little endian can resolve the problem. Just remember to update them once we have supported the 48-bit/128-bit instructions in the future patches. bfd/ * config.bfd: Added targets riscv64be*-*-*, riscv32be*-*-* and riscvbe*-*-*. Also added riscv_elf[32|64]_be_vec. * configure.ac: Handle riscv_elf[32|64]_be_vec. * configure: Regenerate. * elfnn-riscv.c: Include <limits.h> and define CHAR_BIT for riscv_is_insn_reloc. (riscv_get_insn): RISC-V instructions are always little endian, but bfd_get may be used for big-endian, so add new riscv_get_insn to handle the insturctions. (riscv_put_insn): Likewsie. (riscv_is_insn_reloc): Check if we are relocaing an instruction. (perform_relocation): Call riscv_is_insn_reloc to decide if we should use riscv_[get|put]_insn or bfd_[get|put]. (riscv_zero_pcrel_hi_reloc): Use riscv_[get|put]_insn, bfd_[get|put]l32 or bfd_[get|put]l16 for code. (riscv_elf_relocate_section): Likewise. (riscv_elf_finish_dynamic_symbol): Likewise. (riscv_elf_finish_dynamic_sections): Likewise. (_bfd_riscv_relax_call): Likewise. (_bfd_riscv_relax_lui): Likewise. (_bfd_riscv_relax_align): Likewise. (_bfd_riscv_relax_pc): Likewise. (riscv_elf_object_p): Handled for big endian. (TARGET_BIG_SYM, TARGET_BIG_NAME): Defined. * targets.c: Add riscv_elf[32|64]_be_vec. (_bfd_target_vector): Likewise. gas/ * config/tc-riscv.c (riscv_target_format): Add elf64-bigriscv and elf32-bigriscv. (install_insn): Always write instructions as little endian. (riscv_make_nops): Likewise. (md_convert_frag_branch): Likewise. (md_number_to_chars): Write data in target endianness. (options, md_longopts): Add -mbig-endian and -mlittle-endian options. (md_parse_option): Handle the endian options. * config/tc-riscv.h: Only define TARGET_BYTES_BIG_ENDIAN if not already defined. * configure.tgt: Added riscv64be*, riscv32be*, riscvbe*. ld/ * configure.tgt: Added riscvbe-*-*, riscv32be*-*-*, riscv64be*-*-*, riscv32be*-*-linux*, and riscv64be*-*-linux*. * Makefile.am: Added eelf32briscv.c, eelf32briscv_ilp32f.c and eelf32briscv_ilp32.c. * Makefile.in: Regenerate. * emulparams/elf32briscv.sh: Added. * emulparams/elf32briscv_ilp32.sh: Likewise. * emulparams/elf32briscv_ilp32f.sh: Likewise. * emulparams/elf64briscv.sh: Likewise. * emulparams/elf64briscv_lp64.sh: Likewise. * emulparams/elf64briscv_lp64f.sh: Likewise.
2021-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2020-10-06PR26667, Add powerpc64le-*-freebsd* supportBrandon Bergren1-0/+5
PR 26667 bfd/ * config.bfd: Add powerpc64le-*-freebsd*. * configure.ac: Add powerpc_elf64_fbsd_le_vec. * elf64-ppc.c (TARGET_LITTLE_SYM, TARGET_LITTLE_NAME): Define for freebsd. * targets.c (powerpc_elf64_fbsd_le_vec): Declare. (_bfd_target_vector): Add it. * configure: Regenerate. ld/ * Makefile.am (ALL_64_EMULATION_SOURCES): Add eelf64lppc_fbsd.c. Include $(DEPDIR)/eelf64lppc_fbsd.Pc. * configure.tgt: Add powerpc64le-*-freebsd*. * emulparams/elf64lppc_fbsd.sh: New file. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2020-10-05Add NetBSD AArch64 Little Endian and Big Endian BFD support.Nick Clifton1-2/+2
bfd * config.bfd (aarch64-*-netbsd*, aarch64_be-*-netbsd*): Add target.
2020-09-16elf/x86-64: Adjust relocation for PE/x86-64 inputsH.J. Lu1-8/+8
PE linker calls _bfd_relocate_contents to resolve relocation, instead of bfd_perform_relocation. But ELF linker calls bfd_perform_relocation, not _bfd_relocate_contents. When linking PE/x86-64 inputs to generate ELF output, we need to adjust PE/x86-64 relocations in bfd_perform_relocation. Enable PE/x86-64 in bfd together with PEI/x86-64. Update run_ld_link_tests to handle bzip2 binary inputs. bfd/ PR ld/26583 * config.bfd (targ64_selvecs, targ_selvecs): Add x86_64_pe_vec to x86_64_pei_vec. * reloc.c: Include "coff/internal.h". (bfd_perform_relocation): Adjust relocation for PE/x86-64 inputs. ld/ PR ld/26583 * testsuite/ld-x86-64/pe-x86-64-1.od: New file. * testsuite/ld-x86-64/pe-x86-64-1a.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64-1b.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64-1c.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64-2.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-2a.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64-2b.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64-2c.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64-3.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-3a.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64-3b.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64-3c.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64-3d.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64-4.od: Likewise. * testsuite/ld-x86-64/pe-x86-64-4a.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64-4b.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64-4c.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64-4d.obj.bz2: Likewise. * testsuite/ld-x86-64/pe-x86-64.exp: Likewise. * testsuite/lib/ld-lib.exp (run_ld_link_tests): Handle bz2 binary inputs.
2020-08-13Obsolete ia64Alan Modra1-0/+1
* config.bfd: Obsolete ia64*-*-*.
2020-08-13Obsolete arm-symbianelfAlan Modra1-0/+1
* config.bfd: Obsolete arm*-*-symbianelf*.
2020-07-24Move the xc16x target to the obsolete listNick Clifton1-1/+1
2020-07-09Remove powerpc PE supportAlan Modra1-5/+1
Plus some leftover powerpc lynxos support. bfd/ * coff-ppc.c: Delete. * pe-ppc.c: Delete. * pei-ppc.c: Delete. * Makefile.am (BFD32_BACKENDS, BFD32_BACKENDS_CFILES): Remove PE PPC. * coffcode.h (coff_set_arch_mach_hook, coff_set_flags): Remove PPCMAGIC code. (coff_write_object_contents): Remove PPC_PE code. * config.bfd: Move powerpcle-pe to removed targets. * configure.ac: Remove powerpc PE entries. * libcoff-in.h (ppc_allocate_toc_section): Delete. (ppc_process_before_allocation): Delete. * peXXigen.c: Remove POWERPC_LE_PE code and comments. * targets.c: Remove powerpc PE vectors. * po/SRC-POTFILES.in: Regenerate. * libcoff.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils/ * dlltool.c: Remove powerpc PE support and comments. * configure.ac: Remove powerpc PE dlltool config. * configure: Regenerate. gas/ * config/obj-coff.h: Remove TE_PE support. * config/tc-ppc.c: Likewise. * config/tc-ppc.h: Likewise. * configure.tgt: Remove powerpc PE and powerpc lynxos. * testsuite/gas/cfi/cfi.exp (cfi-common-6): Remove powerpc PE condition. * testsuite/gas/macros/macros.exp: Don't xfail powerpc PE. include/ * coff/powerpc.h: Delete. ld/ * emulparams/ppcpe.sh: Delete. * scripttempl/ppcpe.sc: Delete. * emulparams/ppclynx.sh: Delete. * Makefile.am (ALL_EMULATION_SOURCES): Remove ppc PE and lynxos. * configure.tgt: Likewise. * emultempl/beos.em: Remove powerpc PE support. * emultempl/pe.em: Likewise. * po/BLD-POTFILES.in: Regenerate. * Makefile.in: Regenerate.
2020-07-01obsolete xc16xAlan Modra1-0/+1
The xc16x md_apply_fix code is just so broken that in my opinion the target should never have been accepted, and from a quick look at commit logs for the target it appears that no one has ever contributed fixes for anything. This target has just been a 14 year burden on global binutils and cgen maintainers. That's not how free software is supposed to work. bfd/ * config.bfd: Obsolete xc16x. gas/ * config/tc-xc16x.c (md_apply_fix): Add FIXME.
2020-06-30Remove x86 NaCl target supportH.J. Lu1-18/+2
NaCl has been deprecated: https://developer.chrome.com/native-client/migration and NaCl will completely disappear in 2021: https://lists.llvm.org/pipermail/llvm-dev/2020-April/141107.html Remove x86 NaCl target support from bfd, binutils, gas and ld. bfd/ * archures.c (bfd_mach_i386_nacl): Removed. (bfd_mach_i386_i386_nacl): Likewise. (bfd_mach_x86_64_nacl): Likewise. (bfd_mach_x64_32_nacl): Likewise. * config.bfd: Remove *-*-nacl* targets. * configure.ac: Remove x86 NaCl target vectors. * cpu-i386.c (bfd_arch_i386_onebyte_nop_fill): Removed. (bfd_x64_32_nacl_arch): Likewise. (bfd_x86_64_nacl_arch): Likewise. (bfd_i386_nacl_arch): Likewise. (bfd_x64_32_arch_intel_syntax): Updated. * elf32-i386.c: Don't include "elf-nacl.h". (elf_i386_nacl_plt): Removed. (elf_i386_nacl_plt0_entry): Likewise. (elf_i386_nacl_plt_entry): Likewise. (elf_i386_nacl_pic_plt0_entry): Likewise. (elf_i386_nacl_pic_plt_entry): Likewise. (elf_i386_nacl_eh_frame_plt): Likewise. (elf_i386_nacl_plt): Likewise. (elf32_i386_nacl_elf_object_p): Likewise. (elf_i386_get_synthetic_symtab): Updated. (elf_i386_link_setup_gnu_properties): Likewise. * elf64-x86-64.c: Don't include "elf-nacl.h". (elf_x86_64_nacl_plt): Removed. (elf64_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_nacl_plt0_entry): Likewise. (elf_x86_64_nacl_plt_entry): Likewise. (elf_x86_64_nacl_eh_frame_plt): Likewise. (elf_x86_64_nacl_plt): Likewise. (elf32_x86_64_nacl_elf_object_p): Likewise. (elf_x86_64_get_synthetic_symtab): Updated. (elf_x86_64_link_setup_gnu_properties): Likewise. * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Likewise. * targets.c: Remove x86 NaCl target vectors. * bfd-in2.h: Regenerated. * configure: Likewise. binutils/ * NEWS: Mention x86 NaCl target support removal. * dwarf.c (init_dwarf_regnames_by_bfd_arch_and_mach): Remove x86 NaCl target support. * testsuite/binutils-all/elfedit-1.d: Likewise. * testsuite/binutils-all/i386/i386.exp: Likewise. * testsuite/binutils-all/x86-64/objects.exp: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/x86-64.exp: Likewise. gas/ * NEWS: Mention x86 NaCl target support removal. * config/tc-i386.c: Remove x86 NaCl target support. * config/tc-i386.h: Likewise. * configure.tgt: Likewise. * testsuite/gas/i386/i386.exp: Likewise. * testsuite/gas/i386/iamcu-1.d: Likewise. * testsuite/gas/i386/iamcu-2.d: Likewise. * testsuite/gas/i386/iamcu-3.d: Likewise. * testsuite/gas/i386/iamcu-4.d: Likewise. * testsuite/gas/i386/iamcu-5.d: Likewise. * testsuite/gas/i386/k1om.d: Likewise. * testsuite/gas/i386/l1om.d: Likewise. ld/ * Makefile.am (ALL_EMULATION_SOURCES): Remove eelf_i386_nacl.c, eelf32_x86_64_nacl.c, eelf_x86_64_nacl.c. Remove x86 NaCl dep files. * NEWS: Mention x86 NaCl target support removal. * configure.tgt: Remove x86 NaCl target support. * testsuite/ld-elf/binutils.exp: Likewise. * testsuite/ld-elf/elf.exp: Likewise. * testsuite/ld-elfvers/vers.exp: Likewise. * testsuite/ld-i386/align-branch-1.d: Likewise. * testsuite/ld-i386/export-class.exp: Likewise. * testsuite/ld-i386/i386.exp: Likewise. * testsuite/ld-i386/load1.d: Likewise. * testsuite/ld-i386/pie1.d: Likewise. * testsuite/ld-i386/pr12570a.d: Likewise. * testsuite/ld-i386/pr12570b.d: Likewise. * testsuite/ld-i386/pr19636-1d.d: Likewise. * testsuite/ld-i386/pr19636-1l.d: Likewise. * testsuite/ld-i386/pr19636-2c.d: Likewise. * testsuite/ld-i386/pr19636-2d.d: Likewise. * testsuite/ld-i386/pr19636-2e.d: Likewise. * testsuite/ld-i386/pr20244-1a.d: Likewise. * testsuite/ld-i386/pr20244-1b.d: Likewise. * testsuite/ld-i386/pr20244-2a.d: Likewise. * testsuite/ld-i386/pr20244-2b.d: Likewise. * testsuite/ld-i386/pr20244-2c.d: Likewise. * testsuite/ld-i386/pr20244-4a.d: Likewise. * testsuite/ld-i386/pr20244-4b.d: Likewise. * testsuite/ld-i386/pr21884.d: Likewise. * testsuite/ld-ifunc/binutils.exp: Likewise. * testsuite/ld-ifunc/ifunc-10-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-10-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-11-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-11-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-12-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-12-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-13-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-13-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14c-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14d-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14e-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-14f-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-15-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-15-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-16-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-17b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-18b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-19b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64-now.d: Likewise. * testsuite/ld-ifunc/ifunc-2-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-20-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-20-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-21-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-21-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-22-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-22-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-5r-local-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-6b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7a-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-7b-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-8-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-8-x86-64.d: Likewise. * testsuite/ld-ifunc/ifunc-9-i386.d: Likewise. * testsuite/ld-ifunc/ifunc-9-x86-64.d: Likewise. * testsuite/ld-ifunc/pr17154-i386-now.d: Likewise. * testsuite/ld-ifunc/pr17154-i386.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64-now.d: Likewise. * testsuite/ld-ifunc/pr17154-x86-64.d: Likewise. * testsuite/ld-plugin/lto.exp: Likewise. * testsuite/ld-x86-64/align-branch-1.d: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Likewise. * testsuite/ld-x86-64/line.exp: Likewise. * testsuite/ld-x86-64/load1a.d: Likewise. * testsuite/ld-x86-64/load1b.d: Likewise. * testsuite/ld-x86-64/load1c.d: Likewise. * testsuite/ld-x86-64/load1d.d: Likewise. * testsuite/ld-x86-64/pie3.d: Likewise. * testsuite/ld-x86-64/pr18160.d: Likewise. * testsuite/ld-x86-64/pr19013-x32.d: Likewise. * testsuite/ld-x86-64/pr19013.d: Likewise. * testsuite/ld-x86-64/pr19636-2d.d: Likewise. * testsuite/ld-x86-64/pr19636-2l.d: Likewise. * testsuite/ld-x86-64/pr20253-1b.d: Likewise. * testsuite/ld-x86-64/pr20253-1d.d: Likewise. * testsuite/ld-x86-64/pr20253-1f.d: Likewise. * testsuite/ld-x86-64/pr20253-1h.d: Likewise. * testsuite/ld-x86-64/pr20253-1j.d: Likewise. * testsuite/ld-x86-64/pr20253-1l.d: Likewise. * testsuite/ld-x86-64/pr21884.d: Likewise. * testsuite/ld-x86-64/pr22393-3a.rd: Likewise. * testsuite/ld-x86-64/pr22393-3b.rd: Likewise. * testsuite/ld-x86-64/tlsgd10.dd: Likewise. * testsuite/ld-x86-64/tlsgd5.dd: Likewise. * testsuite/ld-x86-64/tlsgd8.dd: Likewise. * testsuite/ld-x86-64/x86-64.exp: Likewise. * emulparams/elf32_x86_64_nacl.sh: Removed. * emulparams/elf_i386_nacl.sh: Likewise. * emulparams/elf_x86_64_nacl.sh: Likewise. * testsuite/ld-i386/emit-relocs-nacl.rd: Likewise. * testsuite/ld-i386/load1-nacl.d: Likewise. * testsuite/ld-i386/pie1-nacl.d: Likewise. * testsuite/ld-i386/plt-nacl.pd: Likewise. * testsuite/ld-i386/plt-pic-nacl.pd: Likewise. * testsuite/ld-i386/pr17709-nacl.rd: Likewise. * testsuite/ld-i386/pr19636-1d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2c-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2d-nacl.d: Likewise. * testsuite/ld-i386/pr19636-2e-nacl.d: Likewise. * testsuite/ld-i386/pr19827-nacl.rd: Likewise. * testsuite/ld-i386/pr21884-nacl.d: Likewise. * testsuite/ld-i386/pr21884-nacl.t: Likewise. * testsuite/ld-i386/tlsbin-nacl.rd: Likewise. * testsuite/ld-i386/tlsbin2-nacl.rd: Likewise. * testsuite/ld-i386/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-i386/tlsnopic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic-nacl.rd: Likewise. * testsuite/ld-i386/tlspic2-nacl.rd: Likewise. * testsuite/ld-x86-64/ilp32-4-nacl.d: Likewise. * testsuite/ld-x86-64/load1a-nacl.d: Likewise. * testsuite/ld-x86-64/load1b-nacl.d: Likewise. * testsuite/ld-x86-64/load1c-nacl.d: Likewise. * testsuite/ld-x86-64/load1d-nacl.d: Likewise. * testsuite/ld-x86-64/pie3-nacl.d: Likewise. * testsuite/ld-x86-64/plt-nacl.pd: Likewise. * testsuite/ld-x86-64/pr17709-nacl.rd: Likewise. * testsuite/ld-x86-64/pr19013-nacl.d: Likewise. * testsuite/ld-x86-64/pr19636-2d-nacl.d: Likewise. * testsuite/ld-x86-64/pr19827-nacl.rd: Likewise. * testsuite/ld-x86-64/pr21884-nacl.d: Likewise. * testsuite/ld-x86-64/pr21884-nacl.t: Likewise. * testsuite/ld-x86-64/split-by-file-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbin2-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.pd: Likewise. * testsuite/ld-x86-64/tlsdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlsgdesc-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic-nacl.rd: Likewise. * testsuite/ld-x86-64/tlspic2-nacl.rd: Likewise. * Makefile.in: Regenerated. * po/BLD-POTFILES.in: Likewise.
2020-06-16Really remove tic30-aout supportAlan Modra1-6/+4
bfd/ * aout-tic30.c: Delete file. * Makefile.am (BFD32_BACKENDS): Remove aout-tic30.lo. (BFD32_BACKENDS_CFILES): Remove aout-tic30.c. * config.bfd (c30-*-*aout*, tic30-*-*aout*): Remove entry. (xc16x-*-elf): Sort properly. * configure.ac: Remove tic30_aout_vec. * targets.c: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. gas/ * config/tc-tic30.h: Remove OBJ_AOUT support. * configure.tgt: Delete tic30-*-*aout* entry. ld/ * emulparams/tic30aout.sh: Delete file. * scripttempl/tic30aout.sc: Delete file. * Makefile.am: Remove etic30aout.c from ALL_EMULATION_SOURCES and delete dependency. * configure.tgt: Delete tic30-*-*aout* entry. * testsuite/ld-scripts/sane1.d: Delete tic30-*-aout mention. * testsuite/ld-scripts/segment-start.d: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate.
2020-06-15Obsolete PowerPC PE, winnt and cygwin targetsAlan Modra1-0/+1
The PowerPC PE support is so old and bitrotted that it ought to be removed. Test results for a cross from x86_64 with no C cross compiler currently shows 109 fails. I don't think anyone cares about the target. This FIXME in bfd/peXXigen.c has been around since 1999, git commit 277d1b5e453: /* FIXME: This file has various tests of POWERPC_LE_PE. Those tests worked when the code was in peicode.h, but no longer work now that the code is in peigen.c. PowerPC NT is said to be dead. If anybody wants to revive the code, you will have to figure out how to handle those issues. */ and this one in gas/config/tc-ppc.c since 1995, git commit cd557d83d61: * FIXME: I just noticed this. This doesn't work at all really. It it * setting bits that bfd probably neither understands or uses. The * correct approach (?) will have to incorporate extra fields attached * to the section to hold the system specific stuff. (krk) * config.bfd: Obsolete powerpcle-*-pe targets.
2020-04-27x86: Add i386 PE big-object supportTamar Christina1-2/+2
The 64-bit version of binutils got support for the PE COFF BIG OBJ format a couple of years ago. The BIG OBJ format is a slightly different COFF format which extends the size of the number of section field in the header from a uint16_t to a uint32_t and so greatly increases the number of sections allowed. However the 32-bit version of bfd never got support for this. The GHC Haskell compiler generates a great deal of symbols due to it's use of -ffunction-sections and -fdata-sections. This meant that we could not build the 32-bit version of the GHC Compiler for many releases now as binutils didn't have this support. This patch adds the support to the 32-bit port of binutils as well and also does come cleanup in the code. bfd/ChangeLog: * coff-i386.c (COFF_WITH_PE_BIGOBJ): New. * coff-x86_64.c (COFF_WITH_PE_BIGOBJ): New. * config.bfd (targ_selvecs): Rename x86_64_pe_be_vec to x86_64_pe_big_vec as it not a big-endian format. (vec i386_pe_big_vec): New. * configure.ac: Likewise. * targets.c: Likewise. * configure: Regenerate. * pe-i386.c (TARGET_SYM_BIG, TARGET_NAME_BIG, COFF_WITH_PE_BIGOBJ): New. * pe-x86_64.c (TARGET_SYM_BIG, TARGET_NAME_BIG): New. (x86_64_pe_be_vec): Moved. gas/ChangeLog: * NEWS: Add news entry for big-obj. * config/tc-i386.c (i386_target_format): Support new format. * doc/c-i386.texi: Add i386 support. * testsuite/gas/pe/big-obj.d: Rename test to not be x64 specific. * testsuite/gas/pe/pe.exp (big-obj): Make test run on i386 as well. ld/ChangeLog: * pe-dll.c (pe_detail_list): Add pe-bigobj-i386.
2020-02-01Move pending obsolete targets onto the definitely obsolete listNick Clifton1-1/+1
2020-01-02Add support for the GBZ80, Z180, and eZ80 variants of the Z80 architecure. ↵Sergey Belyashov1-2/+7
Add an ELF based target for these as well. PR 25224 bfd * Makefile.am: Add z80-elf target support. * configure.ac: Likewise. * targets.c: Likewise. * config.bfd: Add z80-elf target support and new arches: ez80 and z180. * elf32-z80.c: New file. * archures.c: Add new z80 architectures: eZ80 and Z180. * coffcode.h: Likewise. * cpu-z80.c: Likewise. * bfd-in2.h: Likewise plus additional Z80 relocations. * coff-z80.c: Add new relocations for Z80 target and local label check. gas * config/tc-z80.c: Add new architectures: Z180 and eZ80. Add support for assembler code generated by SDCC. Add new relocation types. Add z80-elf target support. * config/tc-z80.h: Add z80-elf target support. Enable dollar local labels. Local labels starts from ".L". * testsuite/gas/all/fwdexp.d: Fix failure due to symbol conflict. * testsuite/gas/all/fwdexp.s: Likewise. * testsuite/gas/z80/suffix.d: Fix failure on ELF target. * testsuite/gas/z80/z80.exp: Add new tests * testsuite/gas/z80/dollar.d: New file. * testsuite/gas/z80/dollar.s: New file. * testsuite/gas/z80/ez80_adl_all.d: New file. * testsuite/gas/z80/ez80_adl_all.s: New file. * testsuite/gas/z80/ez80_adl_suf.d: New file. * testsuite/gas/z80/ez80_isuf.s: New file. * testsuite/gas/z80/ez80_z80_all.d: New file. * testsuite/gas/z80/ez80_z80_all.s: New file. * testsuite/gas/z80/ez80_z80_suf.d: New file. * testsuite/gas/z80/r800_extra.d: New file. * testsuite/gas/z80/r800_extra.s: New file. * testsuite/gas/z80/r800_ii8.d: New file. * testsuite/gas/z80/r800_z80_doc.d: New file. * testsuite/gas/z80/z180.d: New file. * testsuite/gas/z80/z180.s: New file. * testsuite/gas/z80/z180_z80_doc.d: New file. * testsuite/gas/z80/z80_doc.d: New file. * testsuite/gas/z80/z80_doc.s: New file. * testsuite/gas/z80/z80_ii8.d: New file. * testsuite/gas/z80/z80_ii8.s: New file. * testsuite/gas/z80/z80_in_f_c.d: New file. * testsuite/gas/z80/z80_in_f_c.s: New file. * testsuite/gas/z80/z80_op_ii_ld.d: New file. * testsuite/gas/z80/z80_op_ii_ld.s: New file. * testsuite/gas/z80/z80_out_c_0.d: New file. * testsuite/gas/z80/z80_out_c_0.s: New file. * testsuite/gas/z80/z80_reloc.d: New file. * testsuite/gas/z80/z80_reloc.s: New file. * testsuite/gas/z80/z80_sli.d: New file. * testsuite/gas/z80/z80_sli.s: New file. ld * Makefile.am: Add new target z80-elf * configure.tgt: Likewise. * emultempl/z80.em: Add support for eZ80 and Z180 architectures. * emulparams/elf32z80.sh: New file. * emultempl/z80elf.em: Likewise. * testsuite/ld-z80/arch_ez80_adl.d: Likewise. * testsuite/ld-z80/arch_ez80_z80.d: Likewise. * testsuite/ld-z80/arch_r800.d: Likewise. * testsuite/ld-z80/arch_z180.d: Likewise. * testsuite/ld-z80/arch_z80.d: Likewise. * testsuite/ld-z80/comb_arch_ez80_z80.d: Likewise. * testsuite/ld-z80/comb_arch_z180.d: Likewise. * testsuite/ld-z80/labels.s: Likewise. * testsuite/ld-z80/relocs.s: Likewise. * testsuite/ld-z80/relocs_b_ez80.d: Likewise. * testsuite/ld-z80/relocs_b_z80.d: Likewise. * testsuite/ld-z80/relocs_f_z80.d: Likewise. * testsuite/ld-z80/z80.exp: Likewise. opcodes * z80-dis.c: Add support for eZ80 and Z80 instructions.
2020-01-01Update year range in copyright notice of binutils filesAlan Modra1-1/+1
2019-12-17Remove tic80 supportAlan Modra1-5/+0
This is one way of fixing ubsan bug reports, just delete the code. The assembler support was removed back in 2005 along with other non-BFD assemblers, but somehow the remainder of the port stayed in. bfd/ * coff-tic80.c: Delete file. * cpu-tic80.c: Delete file. * archures.c: Remove tic80 support. * coffcode.h: Likewise. * coffswap.h: Likewise. * targets.c: Likewise. * config.bfd: Likewise. * configure.ac: Likewise. * Makefile.am: Likewise. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * po/SRC-POTFILES.in: Regenerate. binutils/ * testsuite/binutils-all/objcopy.exp: Remove tic80 support. * testsuite/binutils-all/objdump.exp: Likewise. gas/ * doc/as.texi: Remove mention of tic80. include/ * coff/tic80.h: Delete file. * opcode/tic80.h: Delete file. ld/ * emulparams/tic80coff.sh: Delete file. * scripttempl/tic80coff.sc: Delete file. * configure.tgt: Remove tic80 support. * Makefile.am: Likewise. * Makefile.in: Regenerate. * po/BLD-POTFILES.in: Regenerate. opcodes/ * tic80-dis.c: Delete file. * tic80-opc.c: Delete file. * disassemble.c: Remove tic80 support. * disassemble.h: Likewise. * Makefile.am: Likewise. * configure.ac: Likewise. * Makefile.in: Regenerate. * configure: Regenerate. * po/POTFILES.in: Regenerate.
generated by cgit v1.1 at 2024-09-08 20:20:20 +0000