aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-01-05libctf: do not print array declarators backwardsNick Alcock2-3/+6
The CTF declarator stack code (used by ctf_type_aname() and thus ultimately by ctf-dump.c and objdump --ctf etc) contains careful code to prepend array declarators to the stack it's building up on the grounds that array declarators are ordered inside out: only they're not, they're ordered outside in. This has led to our (non-upstreamed) compiler emitting array declarators backwards for years, because it looks backwards in the dumper unless it's actually emitted backwards into the CTF so the dumper can wrongly reverse it again: but int[5][6] should be an array of 6 int[5]s, not an array of 5 int[6]'s, so even if the dumper gets it right, actual users calling ctf_array_info are going to see a completely wrong type graph with the wrong bounds in it. Fix trivial. libctf/ChangeLog 2021-01-05 Nick Alcock <nick.alcock@oracle.com> * ctf-decl.c (ctf_decl_push): Don't print array decls backwards.
2021-01-05Prevent flickering when redrawing the TUI source windowHannes Domani2-1/+8
tui_win_info::refresh_window simply calls wrefresh, which internally does a doupdate. This redraws the source background window without the source pad. Then prefresh of the source pad draws the actual source code on top, which flickers. By changing this to wnoutrefresh, the actual drawing on the screen is only done once in the following prefresh, without flickering. gdb/ChangeLog: 2021-01-05 Hannes Domani <ssbssa@yahoo.de> * tui/tui-winsource.c (tui_source_window_base::refresh_window): Call wnoutrefresh instead of tui_win_info::refresh_window.
2021-01-05Redraw both spaces between line numbers and source codeHannes Domani2-1/+8
There a 2 spaces between the numbers and source code, but only one of them was redrawn. So if you increase the source window height, the second space keeps the character of the border rectangle. With this both spaces are redrawn, so the border rectangle character is overwritten. gdb/ChangeLog: 2021-01-05 Hannes Domani <ssbssa@yahoo.de> * tui/tui-source.c (tui_source_window::show_line_number): Redraw second space after line number.
2021-01-05Fix TUI source window drawingHannes Domani2-2/+11
The smaxrow and smaxcol parameters of prefresh are the bottom right corner of the text area inclusive, not exclusive. And if the source window grows bigger in height, the pad has to grow as well. gdb/ChangeLog: 2021-01-05 Hannes Domani <ssbssa@yahoo.de> PR tui/26927 * tui/tui-winsource.c (tui_source_window_base::refresh_window): Fix source pad size in prefresh. (tui_source_window_base::show_source_content): Grow source pad if necessary.
2021-01-05ld sysroot-prefix test failsAlan Modra2-0/+13
* testsuite/ld-scripts/sysroot-prefix.exp: Exclude some targets.
2021-01-05is_relocatable_executable --exclude-libs failureAlan Modra2-1/+11
--exclude-libs makes symbols hidden, but that doesn't prevent them being made dynamic for is_relocatable_executable targets. Fix that. * elflink.c (bfd_elf_link_record_dynamic_symbol): Handle no_export for relocatable executable.
2021-01-05Update libiberty with latest sources from gcc mainlineNick Clifton13-76/+1467
2021-01-05Update config.sub and config.guessAlan Modra3-407/+508
* config.guess: Import from upstream. * config.sub: Likewise.
2021-01-05Re: elf: Allow mixed ordered/unordered inputs for non-relocatable linkAlan Modra3-3/+8
PR ld/26256 * testsuite/ld-elf/pr26256-1b.d: xfail s12z. * testsuite/ld-scripts/crossref.exp (cross1): Don't xfail ia64.
2021-01-05asan: heap buffer overflow in _bfd_vms_slurp_egsdAlan Modra2-2/+5
* vms-alpha.c (_bfd_vms_slurp_egsd): Read flags after size check.
2021-01-05RISC-V: Ouput __global_pointer$ as dynamic symbol when generating dynamic PDE.Nelson Chu2-0/+14
When the ifunc resolver is in the executable, we may relax the variables to gp-relative access instruction in the ifunc resolver, or in other functions that called by the ifunc resolver. But this will cause the uninitialized gp problem since the ifunc need to be resolved at the early runtime, that is at the pre-load stage, but we set the gp until the startup code. At first, we try to add a new dynamic tag, DT_RISCV_GP, to stroe the gp value and let ld.so can init the gp register early, before the pre-load stage. But we need to extend the ABI if we want to add a new dynamic tag. Therefore, in the psabi discussion, we try another solution, which was suggested by the lld and FreeBSD linker experts, to let ld.so set the gp earlier - make sure __global_pointer$ is output as a dynamic symbol when we are generating pde, since we only do the relaxation for it. Afterwards, ld.so can search the DT_SYMTAB to get the gp value, and set the gp register before resolving ifunc. bfd/ * elfnn-riscv.c (allocate_dynrelocs): When we are generating pde, make sure gp symbol is output as a dynamic symbol.
2021-01-04sim: include stdlib.h for atoi()Mike Frysinger10-4/+23
Make sure the files using atoi() include stdlib.h for its prototype. These files were relying on it being included implicitly by others which isn't guaranteed, and newer toolchains produce warnings.
2021-01-04sim: stdlib.h for abs()Mike Frysinger6-0/+16
Make sure the files using abs() include stdlib.h for its prototype. These files were relying on it being included implicitly by others which isn't guaranteed, and newer toolchains produce warnings.
2021-01-05Automatic date update in version.inGDB Administrator1-1/+1
2021-01-04gdb: bfin: use align helperMike Frysinger2-3/+8
2021-01-04sim: update bug URI to https://Mike Frysinger64-33/+159
2021-01-04sim: common: version: add build & homepage info when interactiveMike Frysinger2-0/+20
This mirrors gdb behavior of dumping extra info when being run in interactive mode. It also gives us an excuse to use the otherwise unused sim_print_config.
2021-01-04sim: common: use sim_config_print nameMike Frysinger3-3/+3
Meant to push this variant where naming preference is given to the module the code resides in rather than the operation it performs.
2021-01-04sim: common: add a version output helper w/copyright+license infoMike Frysinger3-1/+31
This mirrors the existing sim_print_help function, and the behavior of all other GNU tools with their --version.
2021-01-04sim: common: rename sim_print_configMike Frysinger3-2/+8
print_sim_config has never been used anywhere, so rename it to follow the sim_* naming style for all other symbols we export.
2021-01-04elf: Allow mixed ordered/unordered inputs for non-relocatable linkH.J. Lu22-25/+354
For non-relocatable link with SHF_LINK_ORDER inputs, allow mixed indirect and data inputs with ordered and unordered inputs: 1. Add pattern to bfd_section for the matching section name pattern in linker script and update BFD_FAKE_SECTION. 2. Sort the consecutive bfd_indirect_link_order sections with the same pattern to allow linker script to overdide input section order. 3. Place unordered sections before ordered sections. 4. Change the offsets of the indirect input sections only. bfd/ PR ld/26256 * elflink.c (compare_link_order): Place unordered sections before ordered sections. (elf_fixup_link_order): Add a link info argument. Allow mixed ordered and unordered input sections for non-relocatable link. Sort the consecutive bfd_indirect_link_order sections with the same pattern. Change the offsets of the bfd_indirect_link_order sections only. (bfd_elf_final_link): Pass info to elf_fixup_link_order. * section.c (bfd_section): Add pattern. (BFD_FAKE_SECTION): Initialize pattern to NULL. * bfd-in2.h: Regenerated. gas/ PR ld/26256 * config/obj-elf.c (obj_elf_change_section): Also filter out SHF_LINK_ORDER. ld/ PR ld/26256 * ldlang.c (gc_section_callback): Set pattern. * testsuite/ld-elf/pr26256-1.s: New file. * testsuite/ld-elf/pr26256-1.t: Likewise. * testsuite/ld-elf/pr26256-1a.d: Likewise. * testsuite/ld-elf/pr26256-1b.d: Likewise. * testsuite/ld-elf/pr26256-2.s: Likewise. * testsuite/ld-elf/pr26256-2.t: Likewise. * testsuite/ld-elf/pr26256-2a.d: Likewise. * testsuite/ld-elf/pr26256-2b-alt.d: Likewise. * testsuite/ld-elf/pr26256-2b.d: Likewise. * testsuite/ld-elf/pr26256-3.s: Likewise. * testsuite/ld-elf/pr26256-3a.d: Likewise. * testsuite/ld-elf/pr26256-3a.t: Likewise. * testsuite/ld-elf/pr26256-3b.d: Likewise. * testsuite/ld-elf/pr26256-3b.t: Likewise.
2021-01-04[gdb/symtab] Remove superfluous end-of-sequence markerTom de Vries4-2/+110
While working on PR26935 I noticed that when running test-case gdb.base/morestack.exp with target board unix/-m32/-fPIE/-pie and ld linker, I get this linetable fragment for morestack.S using readelf -wL: ... CU: ../../../../libgcc/config/i386/morestack.S: Line number Starting address View Stmt 109 0xc9c x ... 838 0xe03 x - 0xe04 636 0 x 637 0x3 x - 0x4 ... but with "maint info line-table" I get: ... INDEX LINE ADDRESS IS-STMT 0 END 0x00000004 Y 1 109 0x00000c9c Y ... 110 838 0x00000e03 Y 111 END 0x00000e04 Y ... So, apparently the entries with addresses 0x0 and 0x3 are filtered out because the addresses are out of range, but the same doesn't happen with the end-of-seq terminator. Fix this by filtering out end-of-seq terminators that do not actually terminate anything. Tested on x86_64-linux. gdb/ChangeLog: 2021-01-04 Tom de Vries <tdevries@suse.de> * buildsym.c (buildsym_compunit::record_line): Filter out end-of-seq terminators that do not terminate anything. gdb/testsuite/ChangeLog: 2021-01-04 Tom de Vries <tdevries@suse.de> * gdb.dwarf2/dw2-out-of-range-end-of-seq.exp: New file.
2021-01-04gdb: introduce scoped debug printsSimon Marchi14-12/+162
I spent a lot of time reading infrun debug logs recently, and I think they could be made much more readable by being indented, to clearly see what operation is done as part of what other operation. In the current format, there are no visual cues to tell where things start and end, it's just a big flat list. It's also difficult to understand what caused a given operation (e.g. a call to resume_1) to be done. To help with this, I propose to add the new scoped_debug_start_end structure, along with a bunch of macros to make it convenient to use. The idea of scoped_debug_start_end is simply to print a start and end message at construction and destruction. It also increments/decrements a depth counter in order to make debug statements printed during this range use some indentation. Some care is taken to handle the fact that debug can be turned on or off in the middle of such a range. For example, a "set debug foo 1" command in a breakpoint command, or a superior GDB manually changing the debug_foo variable. Two macros are added in gdbsupport/common-debug.h, which are helpers to define module-specific macros: - scoped_debug_start_end: takes a message that is printed both at construction / destruction, with "start: " and "end: " prefixes. - scoped_debug_enter_exit: prints hard-coded "enter" and "exit" messages, to denote the entry and exit of a function. I added some examples in the infrun module to give an idea of how it can be used and what the result looks like. The macros are in capital letters (INFRUN_SCOPED_DEBUG_START_END and INFRUN_SCOPED_DEBUG_ENTER_EXIT) to mimic the existing SCOPE_EXIT, but that can be changed if you prefer something else. Here's an excerpt of the debug statements printed when doing "continue", where a displaced step is started: [infrun] proceed: enter [infrun] proceed: addr=0xffffffffffffffff, signal=GDB_SIGNAL_DEFAULT [infrun] global_thread_step_over_chain_enqueue: enqueueing thread Thread 0x7ffff75a5640 (LWP 2289301) in global step over chain [infrun] start_step_over: enter [infrun] start_step_over: stealing global queue of threads to step, length = 1 [infrun] start_step_over: resuming [Thread 0x7ffff75a5640 (LWP 2289301)] for step-over [infrun] resume_1: step=1, signal=GDB_SIGNAL_0, trap_expected=1, current thread [Thread 0x7ffff75a5640 (LWP 2289301)] at 0x5555555551bd [displaced] displaced_step_prepare_throw: displaced-stepping Thread 0x7ffff75a5640 (LWP 2289301) now [displaced] prepare: selected buffer at 0x5555555550c2 [displaced] prepare: saved 0x5555555550c2: 1e fa 31 ed 49 89 d1 5e 48 89 e2 48 83 e4 f0 50 [displaced] amd64_displaced_step_copy_insn: copy 0x5555555551bd->0x5555555550c2: c7 45 fc 00 00 00 00 eb 13 8b 05 d4 2e 00 00 83 [displaced] displaced_step_prepare_throw: prepared successfully thread=Thread 0x7ffff75a5640 (LWP 2289301), original_pc=0x5555555551bd, displaced_pc=0x5555555550c2 [displaced] resume_1: run 0x5555555550c2: c7 45 fc 00 [infrun] infrun_async: enable=1 [infrun] prepare_to_wait: prepare_to_wait [infrun] start_step_over: [Thread 0x7ffff75a5640 (LWP 2289301)] was resumed. [infrun] operator(): step-over queue now empty [infrun] start_step_over: exit [infrun] proceed: start: resuming threads, all-stop-on-top-of-non-stop [infrun] proceed: resuming Thread 0x7ffff7da7740 (LWP 2289296) [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [Thread 0x7ffff7da7740 (LWP 2289296)] at 0x7ffff7f7d9b7 [infrun] prepare_to_wait: prepare_to_wait [infrun] proceed: resuming Thread 0x7ffff7da6640 (LWP 2289300) [infrun] resume_1: thread Thread 0x7ffff7da6640 (LWP 2289300) has pending wait status status->kind = stopped, signal = GDB_SIGNAL_TRAP (currently_stepping=0). [infrun] prepare_to_wait: prepare_to_wait [infrun] proceed: [Thread 0x7ffff75a5640 (LWP 2289301)] resumed [infrun] proceed: resuming Thread 0x7ffff6da4640 (LWP 2289302) [infrun] resume_1: thread Thread 0x7ffff6da4640 (LWP 2289302) has pending wait status status->kind = stopped, signal = GDB_SIGNAL_TRAP (currently_stepping=0). [infrun] prepare_to_wait: prepare_to_wait [infrun] proceed: end: resuming threads, all-stop-on-top-of-non-stop [infrun] proceed: exit We can easily see where the call to `proceed` starts and end. We can also see why there are a bunch of resume_1 calls, it's because we are resuming threads, emulating all-stop on top of a non-stop target. We also see that debug statements nest well with other modules that have been migrated to use the "new" debug statement helpers (because they all use debug_prefixed_vprintf in the end. I think this is desirable, for example we could see the debug statements about reading the DWARF info of a library nested under the debug statements about loading that library. Of course, modules that haven't been migrated to use the "new" helpers will still print without indentations. This will be one good reason to migrate them. I think the runtime cost (when debug statements are disabled) of this is reasonable, given the improvement in readability. There is the cost of the conditionals (like standard debug statements), one more condition (if (m_must_decrement_print_depth)) and the cost of constructing a stack object, which means copying a fews pointers. Adding the print in fetch_inferior_event breaks some tests that use "set debug infrun", because it prints a debug statement after the prompt. I adapted these tests to cope with it, by using the "-prompt" switch of gdb_test_multiple to as if this debug statement is part of the expected prompt. It's unfortunate that we have to do this, but I think the debug print is useful, and I don't want a few tests to get in the way of adding good debug output. gdbsupport/ChangeLog: * common-debug.h (debug_print_depth): New. (struct scoped_debug_start_end): New. (scoped_debug_start_end): New. (scoped_debug_enter_exit): New. * common-debug.cc (debug_prefixed_vprintf): Print indentation. gdb/ChangeLog: * debug.c (debug_print_depth): New. * infrun.h (INFRUN_SCOPED_DEBUG_START_END): New. (INFRUN_SCOPED_DEBUG_ENTER_EXIT): New. * infrun.c (start_step_over): Use INFRUN_SCOPED_DEBUG_ENTER_EXIT. (proceed): Use INFRUN_SCOPED_DEBUG_ENTER_EXIT and INFRUN_SCOPED_DEBUG_START_END. (fetch_inferior_event): Use INFRUN_SCOPED_DEBUG_ENTER_EXIT. gdbserver/ChangeLog: * debug.cc (debug_print_depth): New. gdb/testsuite/ChangeLog: * gdb.base/ui-redirect.exp: Expect infrun debug print after prompt. * gdb.threads/ia64-sigill.exp: Likewise. * gdb.threads/watchthreads-reorder.exp: Likewise. Change-Id: I7c3805e6487807aa63a1bae318876a0c69dce949
2021-01-04gdb: use infrun_debug_printf in print_target_wait_resultsSimon Marchi2-25/+15
The code in print_target_wait_results uses a single call to debug_printf in order to make sure a single timestamp is emitted, despite printing multiple lines. The result is: 941502.043284 [infrun] target_wait (-1.0.0, status) = [infrun] 649832.649832.0 [process 649832], [infrun] status->kind = stopped, signal = GDB_SIGNAL_TRAP I find this decision a bit counter productive, because it messes up the alignment of the three lines. We don't care that three (slightly different) timestamps are printed. I suggest to change this function to use infrun_debug_printf, with this result: 941601.425771 [infrun] print_target_wait_results: target_wait (-1.0.0 [process -1], status) = 941601.425824 [infrun] print_target_wait_results: 651481.651481.0 [process 651481], 941601.425867 [infrun] print_target_wait_results: status->kind = stopped, signal = GDB_SIGNAL_TRAP Note that the current code only prints the waiton_ptid as a string between square brackets if pid != -1. I don't think this complexity is needed in a debug print. I made it so it's always printed, which I think results in a much simpler function. gdb/ChangeLog: * infrun.c (print_target_wait_results): Use infrun_debug_printf. Change-Id: I817bd10286b8e641a6c751ac3a1bd1ddf9b18ce0
2021-01-04gdb: make "set debug timestamp" work nice with new debug printoutsSimon Marchi2-15/+24
New in v2: - implement by modifying vprintf_unfiltered rather than debug_prefixed_vprintf. I tried enabling debug timestamps, and realized that it doesn't play well with the revamp of the debug printouts I've been working on: $ ./gdb -q -nx --data-directory=data-directory -ex "set debug infrun" -ex "set debug timestamp" a.out Reading symbols from a.out... (gdb) start Temporary breakpoint 1 at 0x1131: file test.c, line 2. Starting program: /home/smarchi/build/binutils-gdb-all-targets/gdb/a.out 939897.769338 [infrun] infrun_async: 939897.769383 enable=1 939897.769409 939897.915218 [infrun] proceed: 939897.915281 addr=0x7ffff7fd0100, signal=GDB_SIGNAL_0 939897.915315 939897.915417 [infrun] start_step_over: 939897.915464 stealing global queue of threads to step, length = 0 939897.915502 939897.915567 [infrun] operator(): 939897.915601 step-over queue now empty 939897.915633 939897.915690 [infrun] proceed: 939897.915729 resuming process 636244 939897.915768 939897.915892 [infrun] resume_1: 939897.915954 step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [process 636244] at 0x7ffff7fd0100 939897.915991 939897.916119 [infrun] prepare_to_wait: 939897.916153 prepare_to_wait 939897.916201 939897.916661 [infrun] target_wait (-1.0.0, status) = [infrun] 636244.636244.0 [process 636244], [infrun] status->kind = stopped, signal = GDB_SIGNAL_TRAP 939897.916734 [infrun] handle_inferior_event: 939897.916768 status->kind = stopped, signal = GDB_SIGNAL_TRAP 939897.916799 This is due to debug_prefixed_vprintf being implemented as three separate calls to debug_printf / debug_vprintf. Each call gets its own timestamp and newline, curtesy of vprintf_unfiltered. My first idea was to add a "line_start" parameter to debug_vprintf, allowing the caller to say whether the print is the start of the line. A debug timestamp would only be printed if line_start was true. However, that was much more invasive than the simple fix implemented in this patch. My second idea was to make debug_prefixed_vprintf use string_printf and issue a single call to debug_printf. That would however prevent future use of styling in the debug messages. What is implemented in this patch is the same as is implemented in GDBserver: the timestamp-printing code in GDB tracks whether the last debug output ended with a newline. If so, it prints a timestamp on the next debug output. After the fix, it looks like this: $ ./gdb -q -nx --data-directory=data-directory -ex "set debug infrun" -ex "set debug timestamp" a.out Reading symbols from a.out... (gdb) start Temporary breakpoint 1 at 0x1131: file test.c, line 2. Starting program: /home/smarchi/build/binutils-gdb-all-targets/gdb/a.out 941112.135662 [infrun] infrun_async: enable=1 941112.279930 [infrun] proceed: addr=0x7ffff7fd0100, signal=GDB_SIGNAL_0 941112.280064 [infrun] start_step_over: stealing global queue of threads to step, length = 0 941112.280125 [infrun] operator(): step-over queue now empty 941112.280194 [infrun] proceed: resuming process 646228 941112.280332 [infrun] resume_1: step=0, signal=GDB_SIGNAL_0, trap_expected=0, current thread [process 646228] at 0x7ffff7fd0100 941112.280480 [infrun] prepare_to_wait: prepare_to_wait 941112.281004 [infrun] target_wait (-1.0.0, status) = [infrun] 646228.646228.0 [process 646228], [infrun] status->kind = stopped, signal = GDB_SIGNAL_TRAP 941112.281078 [infrun] handle_inferior_event: status->kind = stopped, signal = GDB_SIGNAL_TRAP gdb/ChangeLog: * utils.c (vfprintf_unfiltered): Print timestamp only when previous debug output ended with a newline. Change-Id: Idcfe3acc7e3d0f526a5f0a43a5e0884bf93c41ae
2021-01-04gdb/testsuite: avoid reading files through the remote protocol in ↵Simon Marchi18-48/+208
gdb.server/*.exp When I run some tests in gdb.server (fox example gdb.server/ext-attach.exp) on Ubuntu 20.04 with separate debug info for glibc installed, they often time out. This is because GDB reads the debug info through the remote protocol which is particularly slow: attach 316937 Attaching to program: /home/smarchi/build/binutils-gdb-all-targets/gdb/testsuite/outputs/gdb.server/ext-attach/ext-attach, process 316937 Reading /lib/x86_64-linux-gnu/libc.so.6 from remote target... warning: File transfers from remote targets can be slow. Use "set sysroot" to access files locally instead. Reading /lib64/ld-linux-x86-64.so.2 from remote target... Reading symbols from target:/lib/x86_64-linux-gnu/libc.so.6... Reading /lib/x86_64-linux-gnu/libc-2.31.so from remote target... Reading /lib/x86_64-linux-gnu/.debug/libc-2.31.so from remote target... Reading /usr/lib/debug//lib/x86_64-linux-gnu/libc-2.31.so from remote target... FAIL: gdb.server/ext-attach.exp: attach to remote program 1 (timeout) This is avoided in gdbserver boards by adding "set sysroot" to GDBFLAGS (see boards/local-board.exp), which makes GDB read files from the local filesystem. But gdb.server tests spawn GDBserver directly, so are ran even when using the default unix board, where the "set sysroot" isn't used. Modify these tests to append "set sysroot" to the GDBFLAGS, a bit like lib/local-board.exp does. One special case is gdb.server/sysroot.exp, whose intent is to test different "set sysroot" values. For this one, increase the timeout when testing the "target:" sysroot. gdb/testsuite/ChangeLog: * gdb.server/abspath.exp: Append "set sysroot" to GDBFLAGS. * gdb.server/connect-without-multi-process.exp: Likewise. * gdb.server/exit-multiple-threads.exp: Likewise. * gdb.server/ext-attach.exp: Likewise. * gdb.server/ext-restart.exp: Likewise. * gdb.server/ext-run.exp: Likewise. * gdb.server/ext-wrapper.exp: Likewise. * gdb.server/multi-ui-errors.exp: Likewise. * gdb.server/no-thread-db.exp: Likewise. * gdb.server/reconnect-ctrl-c.exp: Likewise. * gdb.server/run-without-local-binary.exp: Likewise. * gdb.server/server-kill.exp: Likewise. * gdb.server/server-run.exp: Likewise. * gdb.server/solib-list.exp: Likewise. * gdb.server/stop-reply-no-thread.exp: Likewise. * gdb.server/wrapper.exp: Likewise. * gdb.server/sysroot.exp: Increase timeout when testing the target: sysroot. Change-Id: I7451bcc737f90e2cd0b977e9f09da3710774b0bf
2021-01-04gdb/testsuite: use clean_restart in gdb.server/server-run.expSimon Marchi2-4/+5
I think this sequence of commands can be replaced with clean_restart. gdb/testsuite/ChangeLog: * gdb.server/server-run.exp: Use clean_restart. Change-Id: If8c3eaa89f4ee58901282f5f1d5d4e1100ce7ac5
2021-01-04gdb/testsuite: use clean_restart in gdb.server/ext-run.expSimon Marchi2-7/+7
I think the sequence of commands here could be replaced with clean_restart. The test starts with GDB not started, so it should not be started when we reach gdb_skip_xml_test. gdb/testsuite/ChangeLog: * gdb.server/ext-run.exp: Use clean_restart. Change-Id: I8c033bad6c52f3d58d6aa377b8355fc633c7aede
2021-01-04gdb/testsuite: use build_executable in gdb.server/stop-reply-no-thread.expSimon Marchi2-1/+6
This test uses prepare_for_testing, then does a clean_restart for each test configuration. prepare_for_testing does a build_executable plus a clean_restart. So the clean_restart inside prepare_for_testing is done for nothing. Change prepare_for_testing to just build_executable to avoid the unnecessary clean_restart. gdb/testsuite/ChangeLog: * gdb.server/stop-reply-no-thread.exp: Use build_executable instead of prepare_for_testing. Change-Id: I8b2a2e90353c57c39c49a3665083331b4882fdd0
2021-01-04gdb/testsuite: use clean_restart in gdb.server/solib-list.expSimon Marchi2-6/+5
I think this sequence of commands can be replaced by clean_restart, despite what the comment says, as long as we don't use the `binfile` argument to clean_restart. gdb/testsuite/ChangeLog: * gdb.server/solib-list.exp: Use clean_restart. Change-Id: I4930564c50a1865cbffe0d660a4296c9d2158084
2021-01-04[gdb/testsuite] Don't require gold for gdb.base/morestack.expTom de Vries3-11/+7
While working on PR26935 I noticed that the test-case requires the gold linker, but doesn't really need it. The -fuse-ld=gold was added to support the printf in the test-case, which prints some information but is not otherwise needed for the test-case. Fix this by removing the printf and the corresponding -fuse-ld=gold. Tested on x86_64-linux. Also checked that the test still fails when the fix from the commit that added the test-case is reverted. gdb/testsuite/ChangeLog: 2021-01-04 Tom de Vries <tdevries@suse.de> * gdb.base/morestack.c: Remove printf. * gdb.base/morestack.exp: Don't use -fuse-ld=gold.
2021-01-04Refactor struct trad_frame_saved_regsLuis Machado37-403/+555
The following patch drops the overloading going on with the trad_frame_saved_reg struct and defines a new struct with a KIND enum and a union of different fields. The new struct looks like this: struct trad_frame_saved_reg { setters/getters ... private: trad_frame_saved_reg_kind m_kind; union { LONGEST value; int realreg; LONGEST addr; const gdb_byte *value_bytes; } m_reg; }; And the enums look like this: /* Describes the kind of encoding a stored register has. */ enum class trad_frame_saved_reg_kind { /* Register value is unknown. */ UNKNOWN = 0, /* Register value is a constant. */ VALUE, /* Register value is in another register. */ REALREG, /* Register value is at an address. */ ADDR, /* Register value is a sequence of bytes. */ VALUE_BYTES }; The patch also adds setters/getters and updates all the users of the old struct. It is worth mentioning that due to the previous overloaded nature of the fields, some tdep files like to store negative offsets and indexes in the ADDR field, so I kept the ADDR as LONGEST instead of CORE_ADDR. Those cases may be better supported by a new enum entry. I have not addressed those cases in this patch to prevent unwanted breakage, given I have no way to test some of the targets. But it would be nice to clean those up eventually. The change to frame-unwind.* is to constify the parameter being passed to the unwinding functions, given we now accept a "const gdb_byte *" for value bytes. Tested on aarch64-linux/Ubuntu 20.04/18.04 and by building GDB with --enable-targets=all. gdb/ChangeLog: 2021-01-04 Luis Machado <luis.machado@linaro.org> Update all users of trad_frame_saved_reg to use the new member functions. Remote all struct keywords from declarations of trad_frame_saved_reg types, except on forward declarations. * aarch64-tdep.c: Update. * alpha-mdebug-tdep.c: Update. * alpha-tdep.c: Update. * arc-tdep.c: Update. * arm-tdep.c: Update. * avr-tdep.c: Update. * cris-tdep.c: Update. * csky-tdep.c: Update. * frv-tdep.c: Update. * hppa-linux-tdep.c: Update. * hppa-tdep.c: Update. * hppa-tdep.h: Update. * lm32-tdep.c: Update. * m32r-linux-tdep.c: Update. * m32r-tdep.c: Update. * m68hc11-tdep.c: Update. * mips-tdep.c: Update. * moxie-tdep.c: Update. * riscv-tdep.c: Update. * rs6000-tdep.c: Update. * s390-linux-tdep.c: Update. * s390-tdep.c: Update. * score-tdep.c: Update. * sparc-netbsd-tdep.c: Update. * sparc-sol2-tdep.c: Update. * sparc64-fbsd-tdep.c: Update. * sparc64-netbsd-tdep.c: Update. * sparc64-obsd-tdep.c: Update. * sparc64-sol2-tdep.c: Update. * tilegx-tdep.c: Update. * v850-tdep.c: Update. * vax-tdep.c: Update. * frame-unwind.c (frame_unwind_got_bytes): Make parameter const. * frame-unwind.h (frame_unwind_got_bytes): Likewise. * trad-frame.c: Update. Remove TF_REG_* enum. (trad_frame_alloc_saved_regs): Add a static assertion to check for a trivially-constructible struct. (trad_frame_reset_saved_regs): Adjust to use member function. (trad_frame_value_p): Likewise. (trad_frame_addr_p): Likewise. (trad_frame_realreg_p): Likewise. (trad_frame_value_bytes_p): Likewise. (trad_frame_set_value): Likewise. (trad_frame_set_realreg): Likewise. (trad_frame_set_addr): Likewise. (trad_frame_set_unknown): Likewise. (trad_frame_set_value_bytes): Likewise. (trad_frame_get_prev_register): Likewise. * trad-frame.h: Update. (trad_frame_saved_reg_kind): New enum. (struct trad_frame_saved_reg) <addr, realreg, data>: Remove. <m_kind, m_reg>: New member fields. <set_value, set_realreg, set_addr, set_unknown, set_value_bytes> <kind, value, realreg, addr, value_bytes, is_value, is_realreg> <is_addr, is_unknown, is_value_bytes>: New member functions.
2021-01-04When displaying ARM private file flag bits, use a 0x prefix.Alexander Fedotov3-4/+10
* elf32-arm.c (elf32_arm_print_private_bfd_data): Prefix hex value of private flags with 0x. * elfnn-aarch64.c (elfNN_aarch64_print_private_bfd_data): Likewise.
2021-01-04PR26822, How to prevent a STT_FILE with absolute path in the linked imageAlan Modra40-78/+127
bfd/ PR 26822 * elflink.c (elf_link_input_bfd): Use the file base name in linker generated STT_FILE symbols. ld/ PR 26822 * testsuite/ld-arm/non-contiguous-arm2.d: Adjust STT_FILE symbol match. * testsuite/ld-arm/non-contiguous-arm3.d: Likewise. * testsuite/ld-arm/non-contiguous-arm5.d: Likewise. * testsuite/ld-arm/non-contiguous-arm6.d: Likewise. * testsuite/ld-i386/tlsbin.rd: Likewise. * testsuite/ld-i386/tlsbin2.rd: Likewise. * testsuite/ld-i386/tlsbindesc.rd: Likewise. * testsuite/ld-i386/tlsdesc.rd: Likewise. * testsuite/ld-i386/tlsnopic.rd: Likewise. * testsuite/ld-i386/tlspic.rd: Likewise. * testsuite/ld-i386/tlspic2.rd: Likewise. * testsuite/ld-mips-elf/global-local-symtab-sort-n64.d: Likewise. * testsuite/ld-mips-elf/global-local-symtab-sort-n64t.d: Likewise. * testsuite/ld-mips-elf/global-local-symtab-sort-o32.d: Likewise. * testsuite/ld-mips-elf/global-local-symtab-sort-o32t.d: Likewise. * testsuite/ld-plugin/pr17973.d: Likewise. * testsuite/ld-tic6x/shlib-1.rd: Likewise. * testsuite/ld-tic6x/shlib-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1b.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1r.rd: Likewise. * testsuite/ld-tic6x/shlib-app-1rb.rd: Likewise. * testsuite/ld-tic6x/shlib-noindex.rd: Likewise. * testsuite/ld-tic6x/static-app-1.rd: Likewise. * testsuite/ld-tic6x/static-app-1b.rd: Likewise. * testsuite/ld-tic6x/static-app-1r.rd: Likewise. * testsuite/ld-tic6x/static-app-1rb.rd: Likewise. * testsuite/ld-x86-64/tlsbin.rd: Likewise. * testsuite/ld-x86-64/tlsbin2.rd: Likewise. * testsuite/ld-x86-64/tlsbindesc.rd: Likewise. * testsuite/ld-x86-64/tlsdesc.rd: Likewise. * testsuite/ld-x86-64/tlspic.rd: Likewise. * testsuite/ld-x86-64/tlspic2.rd: Likewise. * testsuite/ld-xtensa/tlsbin.rd: Likewise. * testsuite/ld-xtensa/tlspic.rd: Likewise.
2021-01-04PR27102, gas: "section symbols are already global"Alan Modra2-3/+8
PR 27102 * symbols.c (S_SET_EXTERNAL): Revise section symbol warning message and register symbol error message.
2021-01-04RISC-V: Fix the merged orders of Z* extension for linker.Nelson Chu4-35/+14
Similar to the commit 6729e2c2af2bd94408430734316597843718a484, we have to check the first char of the Z* extensions, to make sure that they follow the order of the standard extensions. bfd/ * elfxx-riscv.c (riscv_compare_subsets): Removed static. * elfxx-riscv.h: Add declaration. * elfnn-riscv.c (riscv_merge_multi_letter_ext): Use riscv_compare_subsets to check the orders. (riscv_skip_prefix): Removed. (riscv_prefix_cmp): Removed.
2021-01-04PR26741, benign use after free in riscv_parse_prefixed_extAlan Modra2-1/+7
ISO/IEC 9899:1999 C standard "J.2 Undefined behavior" says the following is undefined behaviour: "The value of a pointer that refers to space deallocated by a call to the free or realloc function is used (7.20.3)." PR 26741 * elfxx-riscv.c (riscv_parse_prefixed_ext): Free subset after calculating subset version length.
2021-01-04In libctf, make AC_CONFIG_MACRO_DIR consistent with ACLOCAL_AMFLAGSNicolas Boulenguez3-2/+11
PR 27117 * configure.ac: Make AC_CONFIG_MACRO_DIR consistent with ACLOCAL_AMFLAGS -I dirs. * configure: Regenerate.
2021-01-04PR27101, as: Reject (byte) .align 0x100000000Alan Modra2-2/+8
This allows alignments up to 2**TC_ALIGN_LIMIT, which might be larger than an unsigned int can hold. PR 27101 * read.c (s_align): Use a large enough type for "align" to hold the result of get_absolute_expression.
2021-01-04Automatic date update in version.inGDB Administrator1-1/+1
2021-01-02gdb: fix typos in comments in target-float.cSimon Marchi2-2/+6
gdb/ChangeLog: * target-float.c: Fix typos. Change-Id: Ib65e90746d0a7c77c3fbead81139facb40b91977
2021-01-03PR27140, ppc32 segmentation fault in make_stubAlan Modra2-4/+13
This fixes a thinko in commit fa40fbe4849. st_other global entry bits are relevant only for 64-bit ELFv2. PowerPC gold leaves local sym vector of st_other bits as NULL for 32-bit, hence the segfault. PR 27140 * powerpc.cc (Target_powerpc::Branch_info::make_stub): Only access object->st_other() when 64-bit. (Stub_table::add_long_branch_entry): Ignore "other" when 32-bit.
2021-01-02sim: common: add align_{up,down} to match gdbMike Frysinger5-18/+19
We have ALIGN_{8,16,PAGE} and FLOOR_PAGE macros (where PAGE is defined as 4k) which were imported from the ppc sim. But no other sim utilizes these and hardcoding the sizes in the name is a bit limiting. Let's delete these and import the two general macros that gdb uses: align_up(addr, bytes) align_down(addr, bytes) This in turn allows us to cut over the Blackfin code immediately.
2021-01-03Automatic date update in version.inGDB Administrator1-1/+1
2021-01-02Fix pretty printer of main_type.flds_bnds.boundsHannes Domani2-5/+10
In struct dynamic_prop the members kind and data were renamed to m_kind and m_data. And flag_upper_bound_is_count is actually in bounds directly, not in its high member. gdb/ChangeLog: 2021-01-02 Hannes Domani <ssbssa@yahoo.de> * gdb-gdb.py.in: Fix main_type.flds_bnds.bounds pretty printer.
2021-01-02Automatic date update in version.inGDB Administrator1-1/+1
2021-01-01Manual updates of copyright year range not covered by gdb/copyright.pyJoel Brobecker5-5/+13
gdb/ChangeLog: * gdbarch.sh: Update copyright year range. gdb/doc/ChangeLog: * gdb.texinfo, refcard.tex: Update copyright year range.
2021-01-01Update copyright year range in all GDB filesJoel Brobecker6323-6322/+6326
This commits the result of running gdb/copyright.py as per our Start of New Year procedure... gdb/ChangeLog Update copyright year range in copyright header of all GDB files.
2021-01-01gdb/copyright.py: Also update sources in "gdbserver" and "gdbsupport"Joel Brobecker2-1/+8
This commit adjusts GDB's copyright.py script, following two past changes: - gdb/gdbserver/ being move to the toplevel directory; - gdb/common/ being renamed to gdbsupport/. gdb/ChangeLog: * copyright.py (get_update_list): Add "gdbserver" and "gdbsupport" to the list of directories to update.
2021-01-01Update copyright year in version message for gdb, gdbserver and gdbreplayJoel Brobecker5-3/+12
gdb/ChangeLog: * top.c (print_gdb_version): Update copyright year. gdbserver/ChangeLog: * server.cc (gdbserver_version): Update copyright year. * gdbreplay.cc (gdbreplay_version): Likewise.
generated by cgit v1.1 at 2024-08-03 12:35:54 +0000