aboutsummaryrefslogtreecommitdiff
path: root/ld
diff options
context:
space:
mode:
Diffstat (limited to 'ld')
-rw-r--r--ld/ChangeLog8
-rw-r--r--ld/emultempl/spu_ovl.S55
-rw-r--r--ld/emultempl/spu_ovl.obin1524 -> 1500 bytes
3 files changed, 37 insertions, 26 deletions
diff --git a/ld/ChangeLog b/ld/ChangeLog
index 06bde56..3407aa6 100644
--- a/ld/ChangeLog
+++ b/ld/ChangeLog
@@ -1,3 +1,11 @@
+2008-02-07 Alan Modra <amodra@bigpond.net.au>
+
+ * emultempl/spu_ovl.S: Use low bit of _ovly_table.size as
+ a "present" bit rather than low bit of .buf. Correct indexing
+ into _ovly_buf_table. Use relative loads and stores to access
+ overlay manager local vars.
+ * emultempl/spu_ovl.o: Regenerate.
+
2008-02-04 H.J. Lu <hongjiu.lu@intel.com>
PR 5715
diff --git a/ld/emultempl/spu_ovl.S b/ld/emultempl/spu_ovl.S
index 3f9c83b..92304b2 100644
--- a/ld/emultempl/spu_ovl.S
+++ b/ld/emultempl/spu_ovl.S
@@ -1,6 +1,6 @@
/* Overlay manager for SPU.
- Copyright 2006, 2007 Free Software Foundation, Inc.
+ Copyright 2006, 2007, 2008 Free Software Foundation, Inc.
This file is part of the GNU Binutils.
@@ -46,12 +46,13 @@
#define cgbits reserved2
#define off3 reserved2
#define off4 reserved2
+#define addr4 reserved2
#define off5 reserved2
#define tagstat reserved2
#define reserved3 $77
-#define buf1 reserved3
-#define buf2 reserved3
+#define size1 reserved3
+#define size2 reserved3
#define rv3 reserved3
#define ealo reserved3
#define cmd reserved3
@@ -145,18 +146,18 @@ __ovly_return:
#nop; lnop
#nop; lnop
#nop
- rotqbyi buf1, vma, 12 # 1,4 14
+ rotqbyi size1, vma, 4 # 1,4 14
#nop
stqd save3, -48($sp) # 1,6 15
#nop
stqd save2, -32($sp) # 1,6 16
#nop
stqd save1, -16($sp) # 1,6 17
- andi present1, buf1, 1 # 0,2 18
- stqd ovl, (__ovly_current - __ovly_return)($lr) # 1,6 18
+ andi present1, size1, 1 # 0,2 18
+ stqr ovl, __ovly_current # 1,6 18
#nop; lnop
#nop
- brz present1, __ovly_load_event # 1,4 20
+ brz present1, do_load # 1,4 20
ovly_ret9:
#nop
bi target # 1,4 21
@@ -197,11 +198,11 @@ __ovly_load:
#lnop
#nop; lnop
#nop
- lqd cur, (__ovly_current - __ovly_return)(rv1) # 1,6 2
+ lqr cur, __ovly_current # 1,6 2
shli off2, ovl, 4 # 0,4 3
- stqd ovl, (__ovly_current - __ovly_return)(rv1) # 1,6 3
+ stqr ovl, __ovly_current # 1,6 3
ceq rv2, $lr, rv1 # 0,2 4
- lqd rv3, (__rv_pattern - __ovly_return)(rv1) # 1,6 4
+ lqr rv3, __rv_pattern # 1,6 4
#nop; lnop
#nop; lnop
#nop
@@ -214,11 +215,11 @@ __ovly_load:
ila rv1, __ovly_return # 0,2 1
stqd save2, -32($sp) # 1,6 1
shli off2, ovl, 4 # 0,4 2
- lqa cur, __ovly_current # 1,6 2
+ lqr cur, __ovly_current # 1,6 2
nop
- stqa ovl, __ovly_current # 1,6 3
+ stqr ovl, __ovly_current # 1,6 3
ceq rv2, $lr, rv1 # 0,2 4
- lqd rv3, (__rv_pattern - __ovly_return)(rv1) # 1,6 4
+ lqr rv3, __rv_pattern # 1,6 4
#nop
hbr ovly_load9, target # 1,15 5
#nop
@@ -237,18 +238,18 @@ __ovly_load:
#nop
rotqmbyi rv6, $lr, -8 # 1,4 12
#nop
- rotqbyi buf2, vma, 12 # 1,4 13
+ rotqbyi size2, vma, 4 # 1,4 13
#nop
lqd save3, -48($sp) # 1,6 14
#nop; lnop
or rv7, rv4, rv6 # 0,2 16
lqd save2, -32($sp) # 1,6 16
- andi present2, buf2, 1 # 0,2 17
+ andi present2, size2, 1 # 0,2 17
lnop # 1,0 17
selb $lr, rv7, $lr, rv5 # 0,2 18
lqd save1, -16($sp) # 1,6 18
#nop
- brz present2, __ovly_load_event # 1,4 19
+ brz present2, do_load # 1,4 19
ovly_load9:
#nop
bi target # 1,4 20
@@ -266,6 +267,7 @@ ovly_load9:
.global __ovly_load_event
.type __ovly_load_event, @function
__ovly_load_event:
+do_load:
#nop
rotqbyi sz, vma, 8 # 1,4 0
#nop
@@ -273,7 +275,7 @@ __ovly_load_event:
#nop
lqa ea64, _EAR_ # 1,6 2
#nop
- lqd cgshuf, (__cg_pattern - __ovly_return)($lr) # 1,6 3
+ lqr cgshuf, __cg_pattern # 1,6 3
/* We could predict the branch at the end of this loop by adding a few
instructions, and there are plenty of free cycles to do so without
@@ -316,13 +318,13 @@ __ovly_xfer_loop:
brnz osize, __ovly_xfer_loop # 1,4 24
/* Now update our data structions while waiting for DMA to complete.
- Low bit of .buf needs to be cleared on the _ovly_table entry
+ Low bit of .size needs to be cleared on the _ovly_table entry
corresponding to the evicted overlay, and set on the entry for the
newly loaded overlay. Note that no overlay may in fact be evicted
- as _ovly_buf_table[] starts with all zeros. Don't zap .buf entry
+ as _ovly_buf_table[] starts with all zeros. Don't zap .size entry
for zero index! Also of course update the _ovly_buf_table entry. */
#nop
- lqd newovl, (__ovly_current - __ovly_return)($lr) # 1,6 25
+ lqr newovl, __ovly_current # 1,6 25
#nop; lnop
#nop; lnop
#nop; lnop
@@ -333,7 +335,7 @@ __ovly_xfer_loop:
ila tab3, _ovly_table - 16 # 0,2 32
#lnop
#nop
- fsmbi pbyte, 1 # 1,4 33
+ fsmbi pbyte, 0x100 # 1,4 33
#nop; lnop
#nop
lqx vma, tab3, off3 # 1,6 35
@@ -351,7 +353,7 @@ __ovly_xfer_loop:
#nop; lnop
shli off4, buf3, 2 # 1,4 45
#lnop
- ila tab4, _ovly_buf_table # 0,2 46
+ ila tab4, _ovly_buf_table - 4 # 0,2 46
#lnop
#nop; lnop
#nop; lnop
@@ -359,13 +361,14 @@ __ovly_xfer_loop:
lqx map, tab4, off4 # 1,6 49
#nop
cwx genwi, tab4, off4 # 1,4 50
-#nop; lnop
+ a addr4, tab4, off4 # 0,2 51
+#lnop
#nop; lnop
#nop; lnop
#nop; lnop
#nop
- rotqby oldovl, map, off4 # 1,4 55
- nop
+ rotqby oldovl, map, addr4 # 1,4 55
+#nop
shufb newmap, newovl, map, genwi # 0,4 56
#if MFC_TAG_ID < 16
ila newmask, 1 << MFC_TAG_ID # 0,2 57
@@ -375,7 +378,7 @@ __ovly_xfer_loop:
#lnop
#nop; lnop
#nop; lnop
- stqx newmap, tab4, off4 # 1,6 60
+ stqd newmap, 0(addr4) # 1,6 60
/* Save app's tagmask, wait for DMA complete, restore mask. */
ila tagstat, MFC_TAG_UPDATE_ALL # 0,2 61
diff --git a/ld/emultempl/spu_ovl.o b/ld/emultempl/spu_ovl.o
index d5b37e1..4fe2b25 100644
--- a/ld/emultempl/spu_ovl.o
+++ b/ld/emultempl/spu_ovl.o
Binary files differ