aboutsummaryrefslogtreecommitdiff
path: root/config-ml.in
diff options
context:
space:
mode:
Diffstat (limited to 'config-ml.in')
-rw-r--r--config-ml.in687
1 files changed, 687 insertions, 0 deletions
diff --git a/config-ml.in b/config-ml.in
new file mode 100644
index 0000000..503f7cf
--- /dev/null
+++ b/config-ml.in
@@ -0,0 +1,687 @@
+# Configure fragment invoked in the post-target section for subdirs
+# wanting multilib support.
+#
+# It is advisable to support a few --enable/--disable options to let the
+# user select which libraries s/he really wants.
+#
+# Subdirectories wishing to use multilib should put the following lines
+# in the "post-target" section of configure.in.
+#
+# if [ "${srcdir}" = "." ] ; then
+# if [ "${with_target_subdir}" != "." ] ; then
+# . ${with_multisrctop}../../config-ml.in
+# else
+# . ${with_multisrctop}../config-ml.in
+# fi
+# else
+# . ${srcdir}/../config-ml.in
+# fi
+#
+# See librx/configure.in in the libg++ distribution for an example of how
+# to handle autoconf'd libraries.
+#
+# Things are complicated because 6 separate cases must be handled:
+# 2 (native, cross) x 3 (absolute-path, relative-not-dot, dot) = 6.
+#
+# srcdir=. is special. It must handle make programs that don't handle VPATH.
+# To implement this, a symlink tree is built for each library and for each
+# multilib subdir.
+#
+# The build tree is layed out as
+#
+# ./
+# libg++
+# newlib
+# m68020/
+# libg++
+# newlib
+# m68881/
+# libg++
+# newlib
+#
+# The nice feature about this arrangement is that inter-library references
+# in the build tree work without having to care where you are. Note that
+# inter-library references also work in the source tree because symlink trees
+# are built when srcdir=.
+#
+# Unfortunately, trying to access the libraries in the build tree requires
+# the user to manually choose which library to use as GCC won't be able to
+# find the right one. This is viewed as the lesser of two evils.
+#
+# Configure variables:
+# ${with_target_subdir} = "." for native, or ${target_alias} for cross.
+# Set by top level Makefile.
+# ${with_multisrctop} = how many levels of multilibs there are in the source
+# tree. It exists to handle the case of configuring in the source tree:
+# ${srcdir} is not constant.
+# ${with_multisubdir} = name of multilib subdirectory (eg: m68020/m68881).
+#
+# Makefile variables:
+# MULTISRCTOP = number of multilib levels in source tree (+1 if cross)
+# (FIXME: note that this is different than ${with_multisrctop}. Check out.).
+# MULTIBUILDTOP = number of multilib levels in build tree
+# MULTIDIRS = list of multilib subdirs (eg: m68000 m68020 ...)
+# (only defined in each library's main Makefile).
+# MULTISUBDIR = installed subdirectory name with leading '/' (eg: /m68000)
+# (only defined in each multilib subdir).
+
+# FIXME: Multilib is currently disabled by default for everything other than
+# newlib. It is up to each target to turn on multilib support for the other
+# libraries as desired.
+
+# We have to handle being invoked by both Cygnus configure and Autoconf.
+#
+# Cygnus configure incoming variables:
+# srcdir, subdir, host, arguments
+#
+# Autoconf incoming variables:
+# srcdir, host, ac_configure_args
+#
+# We *could* figure srcdir and host out, but we'd have to do work that
+# our caller has already done to figure them out and requiring these two
+# seems reasonable.
+# Note that `host' in this case is GCC's `target'. Target libraries are
+# configured for a particular host.
+
+if [ -n "${ac_configure_args}" ]; then
+ Makefile=${ac_file-Makefile}
+ ml_config_shell=${CONFIG_SHELL-/bin/sh}
+ ml_arguments="${ac_configure_args}"
+ ml_realsrcdir=${srcdir}
+else
+ Makefile=${Makefile-Makefile}
+ ml_config_shell=${config_shell-/bin/sh}
+ ml_arguments="${arguments}"
+ if [ -n "${subdir}" -a "${subdir}" != "." ] ; then
+ ml_realsrcdir=${srcdir}/${subdir}
+ else
+ ml_realsrcdir=${srcdir}
+ fi
+fi
+
+# Scan all the arguments and set all the ones we need.
+
+ml_verbose=--verbose
+for option in ${ml_arguments}
+do
+ case $option in
+ --*) ;;
+ -*) option=-$option ;;
+ esac
+
+ case $option in
+ --*=*)
+ optarg=`echo $option | sed -e 's/^[^=]*=//'`
+ ;;
+ esac
+
+ case $option in
+ --disable-*)
+ enableopt=`echo ${option} | sed 's:^--disable-:enable_:;s:-:_:g'`
+ eval $enableopt=no
+ ;;
+ --enable-*)
+ case "$option" in
+ *=*) ;;
+ *) optarg=yes ;;
+ esac
+ enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
+ eval $enableopt="$optarg"
+ ;;
+ --norecursion | --no*)
+ ml_norecursion=yes
+ ;;
+ --silent | --sil* | --quiet | --q*)
+ ml_verbose=--silent
+ ;;
+ --verbose | --v | --verb*)
+ ml_verbose=--verbose
+ ;;
+ --with-*)
+ case "$option" in
+ *=*) ;;
+ *) optarg=yes ;;
+ esac
+ withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
+ eval $withopt="$optarg"
+ ;;
+ --without-*)
+ withopt=`echo ${option} | sed 's:^--::;s:out::;s:-:_:g'`
+ eval $withopt=no
+ ;;
+ esac
+done
+
+# Only do this if --enable-multilib.
+if [ "${enable_multilib}" = yes ]; then
+
+# Compute whether this is the library's top level directory
+# (ie: not a multilib subdirectory, and not a subdirectory like libg++/src).
+# ${with_multisubdir} tells us we're in the right branch, but we could be
+# in a subdir of that.
+# ??? The previous version could void this test by separating the process into
+# two files: one that only the library's toplevel configure.in ran (to
+# configure the multilib subdirs), and another that all configure.in's ran to
+# update the Makefile. It seemed reasonable to collapse all multilib support
+# into one file, but it does leave us with having to perform this test.
+ml_toplevel_p=no
+if [ -z "${with_multisubdir}" ]; then
+ if [ "${srcdir}" = "." ]; then
+ # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
+ # ${with_target_subdir} = "." for native, otherwise target alias.
+ if [ "${with_target_subdir}" = "." ]; then
+ if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
+ ml_toplevel_p=yes
+ fi
+ else
+ if [ -f ${ml_realsrcdir}/../../config-ml.in ]; then
+ ml_toplevel_p=yes
+ fi
+ fi
+ else
+ # Use ${ml_realsrcdir} instead of ${srcdir} here to account for ${subdir}.
+ if [ -f ${ml_realsrcdir}/../config-ml.in ]; then
+ ml_toplevel_p=yes
+ fi
+ fi
+fi
+
+# If this is the library's top level directory, set multidirs to the
+# multilib subdirs to support. This lives at the top because we need
+# `multidirs' set right away.
+
+if [ "${ml_toplevel_p}" = yes ]; then
+
+multidirs=
+for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
+ dir=`echo $i | sed -e 's/;.*$//'`
+ if [ "${dir}" = "." ]; then
+ true
+ else
+ if [ -z "${multidirs}" ]; then
+ multidirs="${dir}"
+ else
+ multidirs="${multidirs} ${dir}"
+ fi
+ fi
+done
+
+# Target libraries are configured for the host they run on, so we check
+# $host here, not $target.
+
+case "${host}" in
+arc-*-elf*)
+ if [ x$enable_biendian != xyes ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *be*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ ;;
+arm-*-*)
+ if [ x"$enable_fpu" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *fpu*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x"$enable_26bit" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *26bit*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x"$enable_underscore" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *under*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x"$enable_interwork" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *interwork*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_biendian = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *le* ) : ;;
+ *be* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ ;;
+m68*-*-*)
+ if [ x$enable_softfloat = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *soft-float* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_m68881 = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *m68881* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_m68000 = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *m68000* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_m68020 = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *m68020* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ ;;
+mips*-*-*)
+ if [ x$enable_single_float = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *single* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_biendian = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *el* ) : ;;
+ *eb* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_softfloat = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *soft-float* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ ;;
+powerpc*-*-* | rs6000*-*-*)
+ if [ x$enable_softfloat = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *soft-float* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_powercpu = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ power | */power | */power/* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_powerpccpu = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *powerpc* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_powerpcos = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *mcall-linux* | *mcall-solaris* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_biendian = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *mlittle* | *mbig* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_sysv = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *mcall-sysv* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_aix = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *mcall-aix* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ ;;
+esac
+
+# Remove extraneous blanks from multidirs.
+# Tests like `if [ -n "$multidirs" ]' require it.
+multidirs=`echo "$multidirs" | sed -e 's/^[ ][ ]*//' -e 's/[ ][ ]*$//' -e 's/[ ][ ]*/ /g'`
+
+# Add code to library's top level makefile to handle building the multilib
+# subdirs.
+
+cat > Multi.tem <<\EOF
+
+# FIXME: There should be an @-sign in front of the `if'.
+# Leave out until this is tested a bit more.
+multi-do:
+ if [ -z "$(MULTIDIRS)" ]; then \
+ true; \
+ else \
+ rootpre=`pwd`/; export rootpre; \
+ srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
+ lib=`echo $${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
+ compiler="$(CC)"; \
+ for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \
+ dir=`echo $$i | sed -e 's/;.*$$//'`; \
+ if [ "$${dir}" = "." ]; then \
+ true; \
+ else \
+ if [ -d ../$${dir}/$${lib} ]; then \
+ flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
+ if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(CFLAGS) $${flags}" \
+ CXXFLAGS="$(CXXFLAGS) $${flags}" \
+ LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
+ LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
+ LDFLAGS="$(LDFLAGS) $${flags}" \
+ $(DO)); then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else true; \
+ fi; \
+ fi; \
+ done; \
+ fi
+
+# FIXME: There should be an @-sign in front of the `if'.
+# Leave out until this is tested a bit more.
+multi-clean:
+ if [ -z "$(MULTIDIRS)" ]; then \
+ true; \
+ else \
+ lib=`pwd | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
+ for dir in Makefile $(MULTIDIRS); do \
+ if [ -f ../$${dir}/$${lib}/Makefile ]; then \
+ if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \
+ then true; \
+ else exit 1; \
+ fi; \
+ else true; \
+ fi; \
+ done; \
+ fi
+EOF
+
+cat ${Makefile} Multi.tem > Makefile.tem
+rm -f ${Makefile} Multi.tem
+mv Makefile.tem ${Makefile}
+
+fi # ${ml_toplevel_p} = yes
+
+if [ "${ml_verbose}" = --verbose ]; then
+ echo "Adding multilib support to Makefile in ${ml_realsrcdir}"
+ if [ "${ml_toplevel_p}" = yes ]; then
+ echo "multidirs=${multidirs}"
+ fi
+ echo "with_multisubdir=${with_multisubdir}"
+fi
+
+if [ "${srcdir}" = "." ]; then
+ if [ "${with_target_subdir}" != "." ]; then
+ ml_srcdotdot="../"
+ else
+ ml_srcdotdot=""
+ fi
+else
+ ml_srcdotdot=""
+fi
+
+if [ -z "${with_multisubdir}" ]; then
+ ml_subdir=
+ ml_builddotdot=
+ : # ml_srcdotdot= # already set
+else
+ ml_subdir="/${with_multisubdir}"
+ # The '[^/][^/]*' appears that way to work around a SunOS sed bug.
+ ml_builddotdot=`echo ${with_multisubdir} | sed -e 's:[^/][^/]*:..:g'`/
+ if [ "$srcdir" = "." ]; then
+ ml_srcdotdot=${ml_srcdotdot}${ml_builddotdot}
+ else
+ : # ml_srcdotdot= # already set
+ fi
+fi
+
+if [ "${ml_toplevel_p}" = yes ]; then
+ ml_do='$(MAKE)'
+ ml_clean='$(MAKE)'
+else
+ ml_do=true
+ ml_clean=true
+fi
+
+# TOP is used by newlib and should not be used elsewhere for this purpose.
+# MULTI{SRC,BUILD}TOP are the proper ones to use. MULTISRCTOP is empty
+# when srcdir != builddir. MULTIBUILDTOP is always some number of ../'s.
+# FIXME: newlib needs to be updated to use MULTI{SRC,BUILD}TOP so we can
+# delete TOP. Newlib may wish to continue to use TOP for its own purposes
+# of course.
+# MULTIDIRS is non-empty for the cpu top level Makefile (eg: newlib/Makefile)
+# and lists the subdirectories to recurse into.
+# MULTISUBDIR is non-empty in each cpu subdirectory's Makefile
+# (eg: newlib/h8300h/Makefile) and is the installed subdirectory name with
+# a leading '/'.
+# MULTIDO is used for targets like all, install, and check where
+# $(FLAGS_TO_PASS) augmented with the subdir's compiler option is needed.
+# MULTICLEAN is used for the *clean targets.
+#
+# ??? It is possible to merge MULTIDO and MULTICLEAN into one. They are
+# currently kept separate because we don't want the *clean targets to require
+# the existence of the compiler (which MULTIDO currently requires) and
+# therefore we'd have to record the directory options as well as names
+# (currently we just record the names and use --print-multi-lib to get the
+# options).
+
+sed -e "s:^TOP[ ]*=[ ]*\([./]*\)[ ]*$:TOP = ${ml_builddotdot}\1:" \
+ -e "s:^MULTISRCTOP[ ]*=.*$:MULTISRCTOP = ${ml_srcdotdot}:" \
+ -e "s:^MULTIBUILDTOP[ ]*=.*$:MULTIBUILDTOP = ${ml_builddotdot}:" \
+ -e "s:^MULTIDIRS[ ]*=.*$:MULTIDIRS = ${multidirs}:" \
+ -e "s:^MULTISUBDIR[ ]*=.*$:MULTISUBDIR = ${ml_subdir}:" \
+ -e "s:^MULTIDO[ ]*=.*$:MULTIDO = $ml_do:" \
+ -e "s:^MULTICLEAN[ ]*=.*$:MULTICLEAN = $ml_clean:" \
+ ${Makefile} > Makefile.tem
+rm -f ${Makefile}
+mv Makefile.tem ${Makefile}
+
+# If this is the library's top level, configure each multilib subdir.
+# This is done at the end because this is the loop that runs configure
+# in each multilib subdir and it seemed reasonable to finish updating the
+# Makefile before going on to configure the subdirs.
+
+if [ "${ml_toplevel_p}" = yes ]; then
+
+# We must freshly configure each subdirectory. This bit of code is
+# actually partially stolen from the main configure script. FIXME.
+
+if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then
+
+ if [ "${ml_verbose}" = --verbose ]; then
+ echo "Running configure in multilib subdirs ${multidirs}"
+ echo "pwd: `pwd`"
+ fi
+
+ ml_origdir=`pwd`
+ ml_libdir=`echo $ml_origdir | sed -e 's,^.*/,,'`
+ # cd to top-level-build-dir/${with_target_subdir}
+ cd ..
+
+ for ml_dir in ${multidirs}; do
+
+ if [ "${ml_verbose}" = --verbose ]; then
+ echo "Running configure in multilib subdir ${ml_dir}"
+ echo "pwd: `pwd`"
+ fi
+
+ if [ -d ${ml_dir} ]; then true; else mkdir ${ml_dir}; fi
+ if [ -d ${ml_dir}/${ml_libdir} ]; then true; else mkdir ${ml_dir}/${ml_libdir}; fi
+
+ # Eg: if ${ml_dir} = m68000/m68881, dotdot = ../../
+ dotdot=../`echo ${ml_dir} | sed -e 's|[^/]||g' -e 's|/|../|g'`
+
+ case ${srcdir} in
+ ".")
+ echo Building symlink tree in `pwd`/${ml_dir}/${ml_libdir}
+ if [ "${with_target_subdir}" != "." ]; then
+ ml_unsubdir="../"
+ else
+ ml_unsubdir=""
+ fi
+ (cd ${ml_dir}/${ml_libdir};
+ ../${dotdot}${ml_unsubdir}symlink-tree ../${dotdot}${ml_unsubdir}${ml_libdir} "")
+ if [ -f ${ml_dir}/${ml_libdir}/Makefile ]; then
+ if [ x"${MAKE}" = x ]; then
+ (cd ${ml_dir}/${ml_libdir}; make distclean)
+ else
+ (cd ${ml_dir}/${ml_libdir}; ${MAKE} distclean)
+ fi
+ fi
+ ml_newsrcdir="."
+ ml_srcdiroption=
+ multisrctop=${dotdot}
+ ;;
+ *)
+ case "${srcdir}" in
+ /*) # absolute path
+ ml_newsrcdir=${srcdir}
+ ;;
+ *) # otherwise relative
+ ml_newsrcdir=${dotdot}${srcdir}
+ ;;
+ esac
+ ml_srcdiroption="-srcdir=${ml_newsrcdir}"
+ multisrctop=
+ ;;
+ esac
+
+ case "${progname}" in
+ /*) ml_recprog=${progname} ;;
+ *) ml_recprog=${dotdot}${progname} ;;
+ esac
+
+ # FIXME: POPDIR=${PWD=`pwd`} doesn't work here.
+ ML_POPDIR=`pwd`
+ cd ${ml_dir}/${ml_libdir}
+
+ if [ -f ${ml_newsrcdir}/configure ]; then
+ ml_recprog=${ml_newsrcdir}/configure
+ fi
+ if eval ${ml_config_shell} ${ml_recprog} \
+ --with-multisubdir=${ml_dir} --with-multisrctop=${multisrctop} \
+ ${ml_arguments} ${ml_srcdiroption} ; then
+ true
+ else
+ exit 1
+ fi
+
+ cd ${ML_POPDIR}
+
+ done
+
+ cd ${ml_origdir}
+fi
+
+fi # ${ml_toplevel_p} = yes
+fi # ${enable_multilib} = yes