diff options
author | Alan Modra <amodra@gmail.com> | 2008-01-28 05:59:24 +0000 |
---|---|---|
committer | Alan Modra <amodra@gmail.com> | 2008-01-28 05:59:24 +0000 |
commit | 47f6dab9a3fb353b0faca52fcc07d2f57c4d906c (patch) | |
tree | 9cc0fcaf801807941794b51c5a6726a21692d0b6 /ld | |
parent | 8693ff0ffb451be8a54dceda84bfc78246271dd9 (diff) | |
download | gdb-47f6dab9a3fb353b0faca52fcc07d2f57c4d906c.zip gdb-47f6dab9a3fb353b0faca52fcc07d2f57c4d906c.tar.gz gdb-47f6dab9a3fb353b0faca52fcc07d2f57c4d906c.tar.bz2 |
Rewrite SPU overlay handling code. Put overlay calls stubs in the
overlays where possible. Use a faster call stub, or optionally at
compile time, a more compact stub. Double size of _ovly_buf_table
so that low bit of _ovly_table.buf can be used as a "present" bit.
Reserve an extra _ovly_table entry for index zero.
Diffstat (limited to 'ld')
-rw-r--r-- | ld/ChangeLog | 12 | ||||
-rw-r--r-- | ld/emultempl/spu_ovl.S | 884 | ||||
-rw-r--r-- | ld/emultempl/spu_ovl.o | bin | 1432 -> 1524 bytes | |||
-rw-r--r-- | ld/emultempl/spuelf.em | 47 | ||||
-rw-r--r-- | ld/testsuite/ChangeLog | 5 | ||||
-rw-r--r-- | ld/testsuite/ld-spu/ovl.d | 213 | ||||
-rw-r--r-- | ld/testsuite/ld-spu/ovl2.d | 90 |
7 files changed, 583 insertions, 668 deletions
diff --git a/ld/ChangeLog b/ld/ChangeLog index 071e5b9..2a72f89 100644 --- a/ld/ChangeLog +++ b/ld/ChangeLog @@ -1,3 +1,15 @@ +2008-01-28 Alan Modra <amodra@bigpond.net.au> + + * emultempl/spu_ovl.S: Rewrite. + * emultempl/spu_ovl.o: Regenerate. + * emultempl/spuelf.em (toe): Delete. + (spu_place_special_section): Add param to control section placement. + Adjust callers. + (spu_elf_load_ovl_mgr): Adjust for struct _spu_elf_section_data + changes. + (spu_before_allocation): Adjust spu_elf_size_stubs call. + (gld${EMULATION_NAME}_finish): Adjust spu_elf_build_stubs call. + 2008-01-25 H.J. Lu <hongjiu.lu@intel.com> PR ld/5670 diff --git a/ld/emultempl/spu_ovl.S b/ld/emultempl/spu_ovl.S index 66dd69b..3f9c83b 100644 --- a/ld/emultempl/spu_ovl.S +++ b/ld/emultempl/spu_ovl.S @@ -19,295 +19,242 @@ Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ -/** - * MFC DMA defn's. - */ +/* MFC DMA defn's. */ #define MFC_GET_CMD 0x40 #define MFC_MAX_DMA_SIZE 0x4000 #define MFC_TAG_UPDATE_ALL 2 #define MFC_TAG_ID 0 +/* Register usage. */ +#define reserved1 $75 +#define parm $75 +#define tab1 reserved1 +#define tab2 reserved1 +#define vma reserved1 +#define oldvma reserved1 +#define newmask reserved1 +#define map reserved1 + +#define reserved2 $76 +#define off1 reserved2 +#define off2 reserved2 +#define present1 reserved2 +#define present2 reserved2 +#define sz reserved2 +#define cmp reserved2 +#define add64 reserved2 +#define cgbits reserved2 +#define off3 reserved2 +#define off4 reserved2 +#define off5 reserved2 +#define tagstat reserved2 + +#define reserved3 $77 +#define buf1 reserved3 +#define buf2 reserved3 +#define rv3 reserved3 +#define ealo reserved3 +#define cmd reserved3 +#define off64 reserved3 +#define tab3 reserved3 +#define tab4 reserved3 +#define tab5 reserved3 + +#define reserved4 $78 +#define ovl reserved4 +#define rv2 reserved4 +#define rv5 reserved4 +#define cgshuf reserved4 +#define newovl reserved4 + +#define reserved5 $79 +#define target reserved5 + +#define save1 $72 +#define rv4 save1 +#define rv7 save1 +#define tagid save1 +#define maxsize save1 +#define pbyte save1 +#define pbit save1 + +#define save2 $73 +#define cur save2 +#define rv6 save2 +#define osize save2 +#define zovl save2 +#define oldovl save2 +#define newvma save2 + +#define save3 $74 +#define rv1 save3 +#define ea64 save3 +#define buf3 save3 +#define genwi save3 +#define newmap save3 +#define oldmask save3 -/** - * Temporary register allocations. - * These are saved/restored here. - */ -#define tab $75 -#define cgbits $75 -#define add64 $75 -#define ealo $75 -#define newmask $75 -#define tagstat $75 -#define bchn $75 -#define rv1 $75 - -#define off $76 -#define off64 $76 -#define maxsize $76 -#define oldmask $76 -#define sz $76 -#define lnkr $76 -#define rv2 $76 - -#define cur $77 -#define cmp $77 -#define buf $77 -#define genwi $77 -#define tagid $77 -#define cmd $77 -#define rv3 $77 - -#define cgshuf $78 - -#define vma $6 - -#define map $7 -#define osize $7 -#define cmp2 $7 - -#define ea64 $8 -#define retval $8 - -#ifdef OVLY_IRQ_SAVE -#define irqtmp $8 -#define irq_stat $9 -#endif - -# Stack quadword minux N -#define SQWM1 -16*1 -#define SQWM2 -16*2 -#define SQWM3 -16*3 -#define SQWM4 -16*4 -#define SQWM5 -16*5 -#define SQWM6 -16*6 -#define SQWM7 -16*7 -#define SQWM8 -16*8 -#define SQWM9 -16*9 -#define SQWM10 -16*10 -#define SQWM11 -16*11 -#define SQWM12 -16*12 -#define SQWM13 -16*13 -#define SQWM14 -16*14 -#define SQWM15 -16*15 -#define SQWM16 -16*16 - - .extern _ovly_table - .extern _ovly_buf_table - -#ifdef OVLY_PRINTFS -#define SPE_C99_VPRINTF 37 -__entry_event_format: - .string "In entry_event_hook segment=0x%08x entry-address=0x%08x\n" -__debug_event_format: - .string "In debug_event_hook link-register=0x%08x %08x %08x %08x\n" -__dma_event_format: - .string "In dma_event_hook vma=0x%08x ea=%08x%08x sz=%08x\n" -__ovly_buf_table_format: - .string "_ovly_buf_table[%08x]=%08x\n" -#endif .text - .align 4 - .type __rv_pattern, @object - .size __rv_pattern, 16 + .align 4 + .type __rv_pattern, @object + .size __rv_pattern, 16 __rv_pattern: - .word 0x00010203, 0x1c1d1e1f, 0x00010203, 0x10111213 - .type __cg_pattern, @object - .size __cg_pattern, 16 + .word 0x00010203, 0x10111213, 0x80808080, 0x80808080 + + .type __cg_pattern, @object + .size __cg_pattern, 16 __cg_pattern: - .word 0x04050607, 0x80808080, 0x80808080, 0x80808080 + .word 0x04050607, 0x80808080, 0x80808080, 0x80808080 + + .type __ovly_current, @object + .size __ovly_current, 16 +__ovly_current: + .space 16 -/** +/* * __ovly_return - stub for returning from overlay functions. * - * inputs: - * $lr link register + * On entry the four slots of $lr are: + * __ovly_return, prev ovl index, caller return addr, undefined. * - * outputs: - * $78 old partition number, to be reloaded - * $79 return address in old partion number + * Load the previous overlay and jump to the caller return address. + * Updates __ovly_current. */ - .global __ovly_return - .type __ovly_return, @function - - .word 0 + .align 4 + .global __ovly_return + .type __ovly_return, @function __ovly_return: - shlqbyi $78, $lr, 4 - shlqbyi $79, $lr, 8 - biz $78, $79 - .size __ovly_return, . - __ovly_return - -/** + ila tab1, _ovly_table - 16 # 0,2 0 + shlqbyi ovl, $lr, 4 # 1,4 0 +#nop + shlqbyi target, $lr, 8 # 1,4 1 +#nop; lnop +#nop; lnop + shli off1, ovl, 4 # 0,4 4 +#lnop +#nop + hbr ovly_ret9, target # 1,15 5 +#nop; lnop +#nop; lnop +#nop + lqx vma, tab1, off1 # 1,6 8 +#nop; lnop +#nop; lnop +#nop; lnop +#nop; lnop +#nop; lnop +#nop + rotqbyi buf1, vma, 12 # 1,4 14 +#nop + stqd save3, -48($sp) # 1,6 15 +#nop + stqd save2, -32($sp) # 1,6 16 +#nop + stqd save1, -16($sp) # 1,6 17 + andi present1, buf1, 1 # 0,2 18 + stqd ovl, (__ovly_current - __ovly_return)($lr) # 1,6 18 +#nop; lnop +#nop + brz present1, __ovly_load_event # 1,4 20 +ovly_ret9: +#nop + bi target # 1,4 21 + +/* * __ovly_load - copy an overlay partion to local store. * - * inputs: - * $78 partition number to be loaded. - * $79 branch target in new partition. - * $lr link register, containing return addr. + * On entry $75 points to a word consisting of the overlay index in + * the top 14 bits, and the target address in the bottom 18 bits. * - * outputs: - * $lr new link register, returning through __ovly_return. - * - * Copy a new overlay partition into local store, or return - * immediately if the partition is already resident. + * Sets up $lr to return via __ovly_return. + * Updates __ovly_current. */ - .global __ovly_load - .type __ovly_load, @function - + .align 3 + .global __ovly_load + .type __ovly_load, @function __ovly_load: -/* Save temporary registers to stack. */ - stqd $6, -16($sp) - stqd $7, -32($sp) - stqd $8, -48($sp) - -#ifdef OVLY_IRQ_SAVE -/* Save irq state, then disable interrupts. */ - stqd $9, -64($sp) - ila irqtmp, __ovly_irq_save - rdch irq_stat, $SPU_RdMachStat - bid irqtmp -__ovly_irq_save: -#endif - -#ifdef OVLY_PRINTFS -//============================================== -// In entry_event_hook segment=0x%08x entry-address=0x%08x -//============================================== -# save registers - stqd $10, SQWM5($sp) - stqd $11, SQWM6($sp) - stqd $12, SQWM7($sp) -# Place input parameters onto the stack to form the -# local storage memory image. - ila $10, __entry_event_format - stqd $10, SQWM12($sp) - ai $10, $sp, SQWM9 - stqd $10, SQWM11($sp) - stqd $sp, SQWM10($sp) - stqd $78, SQWM9($sp) - stqd $79, SQWM8($sp) -# Construct a message consisting of the 8-bit opcode -# and 24-bit local store pointer to the input -# parameters and place it forllowing the stop and signal - ila $10, 0x3ffff # address mask - ilhu $11, SPE_C99_VPRINTF << 8 - ai $12, $sp, SQWM12 # parameter pointer - selb $11, $11, $12, $10 # combine command & address ptr - brsl $10, next1a -next1a: - .type next1a, @function - lqr $12, message1a - cwd $10, message1a-next1a($10) - shufb $11, $11, $12, $10 # insert msg into inst word - stqr $11, message1a # store cmd/ptr into msg word - dsync -# Notify the PPE to perform the assisted call request -# by issing a stop and signal with a signal code -# of 0x2100 (C99 class) - stop 0x2100 -message1a: - .word 0 - -# save registers - stqd $13, SQWM8($sp) - stqd $14, SQWM9($sp) - stqd $15, SQWM10($sp) - stqd $16, SQWM11($sp) - -# initialize loop - il $13, 1 - ila $14, _ovly_buf_table - ila $15, _ovly_buf_table_end - -loop_start1: -# Place input parameters onto the stack to form the -# local storage memory image. - ila $10, __ovly_buf_table_format - stqd $10, SQWM16($sp) - ai $10, $sp, SQWM13 - stqd $10, SQWM15($sp) - stqd $sp, SQWM14($sp) - stqd $13, SQWM13($sp) - lqd $16, 0($14) - rotqby $16, $16, $14 - stqd $16, SQWM12($sp) -# Construct a message consisting of the 8-bit opcode -# and 24-bit local store pointer to the input -# parameters and place it forllowing the stop and signal - ila $10, 0x3ffff # address mask - ilhu $11, SPE_C99_VPRINTF << 8 - ai $12, $sp, SQWM16 # parameter pointer - selb $11, $11, $12, $10 # combine command & address ptr - brsl $10, next1b -next1b: - .type next1b, @function - lqr $12, message1b - cwd $10, message1b-next1b($10) - shufb $11, $11, $12, $10 # insert msg into inst word - stqr $11, message1b # store cmd/ptr into msg word - dsync -# Notify the PPE to perform the assisted call request -# by issing a stop and signal with a signal code -# of 0x2100 (C99 class) - stop 0x2100 -message1b: - .word 0 - -# move to next entry - ai $13, $13, 1 - ai $14, $14, 4 - clgt $16, $15, $14 - brnz $16, loop_start1 - -# restore registers - lqd $16, SQWM11($sp) - lqd $15, SQWM10($sp) - lqd $14, SQWM9($sp) - lqd $13, SQWM8($sp) - lqd $12, SQWM7($sp) - lqd $11, SQWM6($sp) - lqd $10, SQWM5($sp) -//============================================== +#if OVL_STUB_SIZE == 8 +######## +#nop + lqd target, 0(parm) # 1,6 -11 +#nop; lnop +#nop; lnop +#nop; lnop +#nop; lnop +#nop; lnop +#nop + rotqby target, target, parm # 1,4 -5 + ila tab2, _ovly_table - 16 # 0,2 -4 + stqd save3, -48($sp) # 1,6 -4 +#nop + stqd save2, -32($sp) # 1,6 -3 +#nop + stqd save1, -16($sp) # 1,6 -2 + rotmi ovl, target, -18 # 0,4 -1 + hbr ovly_load9, target # 1,15 -1 + ila rv1, __ovly_return # 0,2 0 +#lnop +#nop; lnop +#nop + lqd cur, (__ovly_current - __ovly_return)(rv1) # 1,6 2 + shli off2, ovl, 4 # 0,4 3 + stqd ovl, (__ovly_current - __ovly_return)(rv1) # 1,6 3 + ceq rv2, $lr, rv1 # 0,2 4 + lqd rv3, (__rv_pattern - __ovly_return)(rv1) # 1,6 4 +#nop; lnop +#nop; lnop +#nop + lqx vma, tab2, off2 # 1,6 7 +######## +#else /* OVL_STUB_SIZE == 16 */ +######## + ila tab2, _ovly_table - 16 # 0,2 0 + stqd save3, -48($sp) # 1,6 0 + ila rv1, __ovly_return # 0,2 1 + stqd save2, -32($sp) # 1,6 1 + shli off2, ovl, 4 # 0,4 2 + lqa cur, __ovly_current # 1,6 2 + nop + stqa ovl, __ovly_current # 1,6 3 + ceq rv2, $lr, rv1 # 0,2 4 + lqd rv3, (__rv_pattern - __ovly_return)(rv1) # 1,6 4 +#nop + hbr ovly_load9, target # 1,15 5 +#nop + lqx vma, tab2, off2 # 1,6 6 +#nop + stqd save1, -16($sp) # 1,6 7 +######## #endif -/* Set branch hint to overlay target. */ - hbr __ovly_load_ret, $79 - -/* Get caller's overlay index by back chaining through stack frames. - * Loop until end of stack (back chain all-zeros) or - * encountered a link register we set here. */ - lqd bchn, 0($sp) - ila retval, __ovly_return - -__ovly_backchain_loop: - lqd lnkr, 16(bchn) - lqd bchn, 0(bchn) - ceq cmp, lnkr, retval - ceqi cmp2, bchn, 0 - or cmp, cmp, cmp2 - brz cmp, __ovly_backchain_loop - -/* If we reached the zero back-chain, then lnkr is bogus. Clear the - * part of lnkr that we use later (slot 3). */ - rotqbyi cmp2, cmp2, 4 - andc lnkr, lnkr, cmp2 - -/* Set lr = {__ovly_return, prev ovl ndx, caller return adr, callee ovl ndx}. */ - lqd rv1, (__rv_pattern-__ovly_return+4)(retval) - shufb rv2, retval, lnkr, rv1 - shufb rv3, $lr, $78, rv1 - fsmbi rv1, 0xff - selb rv2, rv2, rv3, rv1 -/* If we have a tail call from one overlay function to another overlay, - then lr is already set up. Don't change it. */ - ceq rv1, $lr, retval - fsmb rv1, rv1 - selb $lr, rv2, $lr, rv1 - -/* Branch to $79 if non-overlay */ - brz $78, __ovly_load_restore - -/* Load values from _ovly_table[$78]. +#nop; lnop +#nop; lnop +#nop + shufb rv4, rv1, cur, rv3 # 1,4 10 +#nop + fsmb rv5, rv2 # 1,4 11 +#nop + rotqmbyi rv6, $lr, -8 # 1,4 12 +#nop + rotqbyi buf2, vma, 12 # 1,4 13 +#nop + lqd save3, -48($sp) # 1,6 14 +#nop; lnop + or rv7, rv4, rv6 # 0,2 16 + lqd save2, -32($sp) # 1,6 16 + andi present2, buf2, 1 # 0,2 17 + lnop # 1,0 17 + selb $lr, rv7, $lr, rv5 # 0,2 18 + lqd save1, -16($sp) # 1,6 18 +#nop + brz present2, __ovly_load_event # 1,4 19 +ovly_load9: +#nop + bi target # 1,4 20 + +/* If we get here, we are about to load a new overlay. + * "vma" contains the relevant entry from _ovly_table[]. * extern struct { * u32 vma; * u32 size; @@ -315,265 +262,166 @@ __ovly_backchain_loop: * u32 buf; * } _ovly_table[]; */ - shli off, $78, 4 - ila tab, _ovly_table - 16 - lqx vma, tab, off - rotqbyi buf, vma, 12 - -/* Load values from _ovly_buf_table[buf]. - * extern struct { - * u32 mapped; - * } _ovly_buf_table[]; - */ - ila tab, _ovly_buf_table - ai off, buf, -1 - shli off, off, 2 - lqx map, tab, off - rotqby cur, map, off - -/* Branch to $79 now if overlay is already mapped. */ - ceq cmp, $78, cur - brnz cmp, __ovly_load_restore - -/* Marker for profiling code. If we get here, we are about to load - * a new overlay. - */ - .global __ovly_load_event - .type __ovly_load_event, @function + .align 3 + .global __ovly_load_event + .type __ovly_load_event, @function __ovly_load_event: - -/* Set _ovly_buf_table[buf].mapped = $78. */ - cwx genwi, tab, off - shufb map, $78, map, genwi - stqx map, tab, off - -/* A new partition needs to be loaded. Prepare for DMA loop. - * _EAR_ is the 64b base EA, filled in at run time by the - * loader, and indicating the value for SPU executable image start. - */ - lqd cgshuf, (__cg_pattern-__ovly_return+4)(retval) - rotqbyi osize, vma, 4 - rotqbyi sz, vma, 8 - lqa ea64, _EAR_ - +#nop + rotqbyi sz, vma, 8 # 1,4 0 +#nop + rotqbyi osize, vma, 4 # 1,4 1 +#nop + lqa ea64, _EAR_ # 1,6 2 +#nop + lqd cgshuf, (__cg_pattern - __ovly_return)($lr) # 1,6 3 + +/* We could predict the branch at the end of this loop by adding a few + instructions, and there are plenty of free cycles to do so without + impacting loop execution time. However, it doesn't make a great + deal of sense since we need to wait for the dma to complete anyway. */ __ovly_xfer_loop: -/* 64b add to compute next ea64. */ - rotqmbyi off64, sz, -4 - cg cgbits, ea64, off64 - shufb add64, cgbits, cgbits, cgshuf - addx add64, ea64, off64 - ori ea64, add64, 0 - -/* Setup DMA parameters, then issue DMA request. */ - rotqbyi ealo, add64, 4 - ila maxsize, MFC_MAX_DMA_SIZE - cgt cmp, osize, maxsize - selb sz, osize, maxsize, cmp - ila tagid, MFC_TAG_ID - wrch $MFC_LSA, vma - wrch $MFC_EAH, ea64 - wrch $MFC_EAL, ealo - wrch $MFC_Size, sz - wrch $MFC_TagId, tagid - ila cmd, MFC_GET_CMD - wrch $MFC_Cmd, cmd - -#ifdef OVLY_PRINTFS -//============================================== -// In dma_event_hook vma=0x%08x ea=%08x%08x sz=%08x -//============================================== -# save registers - stqd $10, SQWM5($sp) - stqd $11, SQWM6($sp) - stqd $12, SQWM7($sp) -# Place input parameters onto the stack to form the -# local storage memory image. - ila $10, __dma_event_format - stqd $10, SQWM14($sp) - ai $10, $sp, SQWM11 - stqd $10, SQWM13($sp) - stqd $sp, SQWM12($sp) - stqd vma, SQWM11($sp) - stqd ea64, SQWM10($sp) - stqd ealo, SQWM9($sp) - stqd sz, SQWM8($sp) -# Construct a message consisting of the 8-bit opcode -# and 24-bit local store pointer to the input -# parameters and place it forllowing the stop and signal - ila $10, 0x3ffff # address mask - ilhu $11, SPE_C99_VPRINTF << 8 - ai $12, $sp, SQWM14 # parameter pointer - selb $11, $11, $12, $10 # combine command & address ptr - brsl $10, next3a -next3a: - .type next3a, @function - lqr $12, message3a - cwd $10, message3a-next3a($10) - shufb $11, $11, $12, $10 # insert msg into inst word - stqr $11, message3a # store cmd/ptr into msg word - dsync -# Notify the PPE to perform the assisted call request -# by issing a stop and signal with a signal code -# of 0x2100 (C99 class) - stop 0x2100 -message3a: - .word 0 - -# restore registers - lqd $12, SQWM7($sp) - lqd $11, SQWM6($sp) - lqd $10, SQWM5($sp) -//============================================== -#endif - -/* Increment vma, decrement size, branch back as needed. */ - a vma, vma, sz - sf osize, sz, osize - brnz osize, __ovly_xfer_loop - -/* Save app's tagmask, wait for DMA complete, restore mask. */ - rdch oldmask, $MFC_RdTagMask +#nop + rotqmbyi off64, sz, -4 # 1,4 4 +#nop; lnop +#nop; lnop +#nop; lnop + cg cgbits, ea64, off64 # 0,2 8 +#lnop +#nop; lnop +#nop + shufb add64, cgbits, cgbits, cgshuf # 1,4 10 +#nop; lnop +#nop; lnop +#nop; lnop + addx add64, ea64, off64 # 0,2 14 +#lnop + ila maxsize, MFC_MAX_DMA_SIZE # 0,2 15 + lnop + ori ea64, add64, 0 # 0,2 16 + rotqbyi ealo, add64, 4 # 1,4 16 + cgt cmp, osize, maxsize # 0,2 17 + wrch $MFC_LSA, vma # 1,6 17 +#nop; lnop + selb sz, osize, maxsize, cmp # 0,2 19 + wrch $MFC_EAH, ea64 # 1,6 19 + ila tagid, MFC_TAG_ID # 0,2 20 + wrch $MFC_EAL, ealo # 1,6 20 + ila cmd, MFC_GET_CMD # 0,2 21 + wrch $MFC_Size, sz # 1,6 21 + sf osize, sz, osize # 0,2 22 + wrch $MFC_TagId, tagid # 1,6 22 + a vma, vma, sz # 0,2 23 + wrch $MFC_Cmd, cmd # 1,6 23 +#nop + brnz osize, __ovly_xfer_loop # 1,4 24 + +/* Now update our data structions while waiting for DMA to complete. + Low bit of .buf needs to be cleared on the _ovly_table entry + corresponding to the evicted overlay, and set on the entry for the + newly loaded overlay. Note that no overlay may in fact be evicted + as _ovly_buf_table[] starts with all zeros. Don't zap .buf entry + for zero index! Also of course update the _ovly_buf_table entry. */ +#nop + lqd newovl, (__ovly_current - __ovly_return)($lr) # 1,6 25 +#nop; lnop +#nop; lnop +#nop; lnop +#nop; lnop +#nop; lnop + shli off3, newovl, 4 # 0,4 31 +#lnop + ila tab3, _ovly_table - 16 # 0,2 32 +#lnop +#nop + fsmbi pbyte, 1 # 1,4 33 +#nop; lnop +#nop + lqx vma, tab3, off3 # 1,6 35 +#nop; lnop + andi pbit, pbyte, 1 # 0,2 37 + lnop +#nop; lnop +#nop; lnop +#nop; lnop + or newvma, vma, pbit # 0,2 41 + rotqbyi buf3, vma, 12 # 1,4 41 +#nop; lnop +#nop + stqx newvma, tab3, off3 # 1,6 43 +#nop; lnop + shli off4, buf3, 2 # 1,4 45 +#lnop + ila tab4, _ovly_buf_table # 0,2 46 +#lnop +#nop; lnop +#nop; lnop +#nop + lqx map, tab4, off4 # 1,6 49 +#nop + cwx genwi, tab4, off4 # 1,4 50 +#nop; lnop +#nop; lnop +#nop; lnop +#nop; lnop +#nop + rotqby oldovl, map, off4 # 1,4 55 + nop + shufb newmap, newovl, map, genwi # 0,4 56 #if MFC_TAG_ID < 16 - ilh newmask, 1 << MFC_TAG_ID + ila newmask, 1 << MFC_TAG_ID # 0,2 57 #else - ilhu newmask, 1 << (MFC_TAG_ID - 16) -#endif - wrch $MFC_WrTagMask, newmask - ila tagstat, MFC_TAG_UPDATE_ALL - wrch $MFC_WrTagUpdate, tagstat - rdch tagstat, $MFC_RdTagStat - sync - wrch $MFC_WrTagMask, oldmask - -#ifdef OVLY_PRINTFS -//============================================== -// In debug_event_hook link-register=0x%08x %08x %08x %08x -//============================================== -# save registers - stqd $10, SQWM5($sp) - stqd $11, SQWM6($sp) - stqd $12, SQWM7($sp) -# Place input parameters onto the stack to form the -# local storage memory image. - ila $10, __debug_event_format - stqd $10, SQWM14($sp) - ai $10, $sp, SQWM11 - stqd $10, SQWM13($sp) - stqd $sp, SQWM12($sp) - stqd $lr, SQWM11($sp) - rotqbyi $10, $lr, 4 - stqd $10, SQWM10($sp) - rotqbyi $10, $10, 4 - stqd $10, SQWM9($sp) - rotqbyi $10, $10, 4 - stqd $10, SQWM8($sp) -# Construct a message consisting of the 8-bit opcode -# and 24-bit local store pointer to the input -# parameters and place it forllowing the stop and signal - ila $10, 0x3ffff # address mask - ilhu $11, SPE_C99_VPRINTF << 8 - ai $12, $sp, SQWM14 # parameter pointer - selb $11, $11, $12, $10 # combine command & address ptr - brsl $10, next2a -next2a: - .type next2a, @function - lqr $12, message2a - cwd $10, message2a-next2a($10) - shufb $11, $11, $12, $10 # insert msg into inst word - stqr $11, message2a # store cmd/ptr into msg word - dsync -# Notify the PPE to perform the assisted call request -# by issing a stop and signal with a signal code -# of 0x2100 (C99 class) - stop 0x2100 -message2a: - .word 0 - -# save registers - stqd $13, SQWM8($sp) - stqd $14, SQWM9($sp) - stqd $15, SQWM10($sp) - stqd $16, SQWM11($sp) - -# initialize loop - il $13, 1 - ila $14, _ovly_buf_table - ila $15, _ovly_buf_table_end - -loop_start2: -# Place input parameters onto the stack to form the -# local storage memory image. - ila $10, __ovly_buf_table_format - stqd $10, SQWM16($sp) - ai $10, $sp, SQWM13 - stqd $10, SQWM15($sp) - stqd $sp, SQWM14($sp) - stqd $13, SQWM13($sp) - lqd $16, 0($14) - rotqby $16, $16, $14 - stqd $16, SQWM12($sp) -# Construct a message consisting of the 8-bit opcode -# and 24-bit local store pointer to the input -# parameters and place it forllowing the stop and signal - ila $10, 0x3ffff # address mask - ilhu $11, SPE_C99_VPRINTF << 8 - ai $12, $sp, SQWM16 # parameter pointer - selb $11, $11, $12, $10 # combine command & address ptr - brsl $10, next2b -next2b: - .type next2b, @function - lqr $12, message2b - cwd $10, message2b-next2b($10) - shufb $11, $11, $12, $10 # insert msg into inst word - stqr $11, message2b # store cmd/ptr into msg word - dsync -# Notify the PPE to perform the assisted call request -# by issing a stop and signal with a signal code -# of 0x2100 (C99 class) - stop 0x2100 -message2b: - .word 0 - -# move to next entry - ai $13, $13, 1 - ai $14, $14, 4 - clgt $16, $15, $14 - brnz $16, loop_start2 - -# restore registers - lqd $16, SQWM11($sp) - lqd $15, SQWM10($sp) - lqd $14, SQWM9($sp) - lqd $13, SQWM8($sp) - lqd $12, SQWM7($sp) - lqd $11, SQWM6($sp) - lqd $10, SQWM5($sp) -//============================================== + ilhu newmask, 1 << (MFC_TAG_ID - 16) # 0,2 57 #endif +#lnop +#nop; lnop +#nop; lnop + stqx newmap, tab4, off4 # 1,6 60 + +/* Save app's tagmask, wait for DMA complete, restore mask. */ + ila tagstat, MFC_TAG_UPDATE_ALL # 0,2 61 + rdch oldmask, $MFC_RdTagMask # 1,6 61 +#nop + wrch $MFC_WrTagMask, newmask # 1,6 62 +#nop + wrch $MFC_WrTagUpdate, tagstat # 1,6 63 +#nop + rdch tagstat, $MFC_RdTagStat # 1,6 64 +#nop + sync # 1,4 65 +/* Any hint prior to the sync is lost. A hint here allows the branch + to complete 15 cycles after the hint. With no hint the branch will + take 18 or 19 cycles. */ + ila tab5, _ovly_table - 16 # 0,2 66 + hbr do_load99, target # 1,15 66 + shli off5, oldovl, 4 # 0,4 67 + wrch $MFC_WrTagMask, oldmask # 1,6 67 + ceqi zovl, oldovl, 0 # 0,2 68 +#lnop +#nop; lnop +#nop + fsm zovl, zovl # 1,4 70 +#nop + lqx oldvma, tab5, off5 # 1,6 71 +#nop + lqd save3, -48($sp) # 1,6 72 +#nop; lnop + andc pbit, pbit, zovl # 0,2 74 + lqd save2, -32($sp) # 1,6 74 +#nop; lnop +#nop; lnop + andc oldvma, oldvma, pbit # 0,2 77 + lqd save1, -16($sp) # 1,6 77 +#nop; lnop + nop + stqx oldvma, tab5, off5 # 1,6 79 +#nop; lnop - .global _ovly_debug_event - .type _ovly_debug_event, @function + .global _ovly_debug_event + .type _ovly_debug_event, @function _ovly_debug_event: -/* GDB inserts debugger trap here. */ nop - -__ovly_load_restore: -#ifdef OVLY_IRQ_SAVE -/* Conditionally re-enable interrupts. */ - andi irq_stat, irq_stat, 1 - ila irqtmp, __ovly_irq_restore - binze irq_stat, irqtmp -__ovly_irq_restore: - lqd $9, -64($sp) -#endif - -/* Restore saved registers. */ - lqd $8, -48($sp) - lqd $7, -32($sp) - lqd $6, -16($sp) - -__ovly_load_ret: /* Branch to target address. */ - bi $79 +do_load99: + bi target # 1,4 81 - .size __ovly_load, . - __ovly_load + .size __ovly_load, . - __ovly_load diff --git a/ld/emultempl/spu_ovl.o b/ld/emultempl/spu_ovl.o Binary files differindex a68eea3..d5b37e1 100644 --- a/ld/emultempl/spu_ovl.o +++ b/ld/emultempl/spu_ovl.o diff --git a/ld/emultempl/spuelf.em b/ld/emultempl/spuelf.em index e8333a4..7e618a5 100644 --- a/ld/emultempl/spuelf.em +++ b/ld/emultempl/spuelf.em @@ -58,8 +58,6 @@ static const struct _ovl_stream ovl_mgr_stream = { ovl_mgr + sizeof (ovl_mgr) }; -static asection *toe = NULL; - static int is_spu_target (void) @@ -84,7 +82,8 @@ spu_after_open (void) gld${EMULATION_NAME}_after_open (); } -/* Add section S at the end of output section OUTPUT_NAME. +/* If O is NULL, add section S at the end of output section OUTPUT_NAME. + If O is not NULL, add section S at the beginning of output section O. Really, we should be duplicating ldlang.c map_input_to_output_sections logic here, ie. using the linker script to find where the section @@ -95,11 +94,11 @@ spu_after_open (void) overlay manager code somewhere else. */ static void -spu_place_special_section (asection *s, const char *output_name) +spu_place_special_section (asection *s, asection *o, const char *output_name) { lang_output_section_statement_type *os; - os = lang_output_section_find (output_name); + os = lang_output_section_find (o != NULL ? o->name : output_name); if (os == NULL) { const char *save = s->name; @@ -107,6 +106,15 @@ spu_place_special_section (asection *s, const char *output_name) gld${EMULATION_NAME}_place_orphan (s); s->name = save; } + else if (o != NULL && os->children.head != NULL) + { + lang_statement_list_type add; + + lang_list_init (&add); + lang_add_section (&add, s, os); + *add.tail = os->children.head; + os->children.head = add.head; + } else lang_add_section (&os->children, s, os); @@ -154,7 +162,7 @@ spu_elf_load_ovl_mgr (void) for (in = ovl_is->the_bfd->sections; in != NULL; in = in->next) if ((in->flags & (SEC_ALLOC | SEC_LOAD)) == (SEC_ALLOC | SEC_LOAD)) - spu_place_special_section (in, ".text"); + spu_place_special_section (in, NULL, ".text"); } } @@ -164,7 +172,7 @@ spu_elf_load_ovl_mgr (void) os = os->next) if (os->bfd_section != NULL && spu_elf_section_data (os->bfd_section) != NULL - && spu_elf_section_data (os->bfd_section)->ovl_index != 0) + && spu_elf_section_data (os->bfd_section)->u.o.ovl_index != 0) { if (os->bfd_section->alignment_power < 4) os->bfd_section->alignment_power = 4; @@ -192,20 +200,15 @@ spu_before_allocation (void) /* Find overlays by inspecting section vmas. */ if (spu_elf_find_overlays (output_bfd, &link_info)) { - asection *stub, *ovtab; + int ret; - if (!spu_elf_size_stubs (output_bfd, &link_info, non_overlay_stubs, - stack_analysis, &stub, &ovtab, &toe)) + ret = spu_elf_size_stubs (output_bfd, &link_info, + spu_place_special_section, + non_overlay_stubs); + if (ret == 0) einfo ("%X%P: can not size overlay stubs: %E\n"); - - if (stub != NULL) - { - spu_place_special_section (stub, ".text"); - spu_place_special_section (ovtab, ".data"); - spu_place_special_section (toe, ".toe"); - - spu_elf_load_ovl_mgr (); - } + else if (ret == 2) + spu_elf_load_ovl_mgr (); } /* We must not cache anything from the preliminary sizing. */ @@ -235,10 +238,8 @@ gld${EMULATION_NAME}_finish (void) einfo ("%X%P: %A exceeds local store range\n", s); } - if (toe != NULL - && !spu_elf_build_stubs (&link_info, - emit_stub_syms || link_info.emitrelocations, - toe)) + if (!spu_elf_build_stubs (&link_info, + emit_stub_syms || link_info.emitrelocations)) einfo ("%X%P: can not build overlay stubs: %E\n"); finish_default (); diff --git a/ld/testsuite/ChangeLog b/ld/testsuite/ChangeLog index ec1018e..ed802de 100644 --- a/ld/testsuite/ChangeLog +++ b/ld/testsuite/ChangeLog @@ -1,3 +1,8 @@ +2008-01-28 Alan Modra <amodra@bigpond.net.au> + + * ld-spu/ovl.d: Update. + * ld-spu/ovl2.d: Update. + 2008-01-26 Alan Modra <amodra@bigpond.net.au> * ld-elf/loadaddr.t: New, extracted from.. diff --git a/ld/testsuite/ld-spu/ovl.d b/ld/testsuite/ld-spu/ovl.d index c624659..0cd8788 100644 --- a/ld/testsuite/ld-spu/ovl.d +++ b/ld/testsuite/ld-spu/ovl.d @@ -7,65 +7,90 @@ Disassembly of section \.text: 00000100 <_start>: - 100: 1c f8 00 81 ai \$1,\$1,-32 - 104: 48 20 00 00 xor \$0,\$0,\$0 - 108: 24 00 00 80 stqd \$0,0\(\$1\) - 10c: 24 00 40 80 stqd \$0,16\(\$1\) - 110: 33 00 04 00 brsl \$0,130 <00000000\.ovl_call\.f1_a1> # 130 - 110: SPU_REL16 f1_a1 - 114: 33 00 04 80 brsl \$0,138 <00000000\.ovl_call\.f2_a1> # 138 - 114: SPU_REL16 f2_a1 - 118: 33 00 07 00 brsl \$0,150 <00000000\.ovl_call\.f1_a2> # 150 - 118: SPU_REL16 f1_a2 - 11c: 42 00 ac 09 ila \$9,344 # 158 - 11c: SPU_ADDR18 f2_a2 - 120: 35 20 04 80 bisl \$0,\$9 - 124: 1c 08 00 81 ai \$1,\$1,32 # 20 - 128: 32 7f fb 00 br 100 <_start> # 100 - 128: SPU_REL16 _start +.* ai \$1,\$1,-32 +.* xor \$0,\$0,\$0 +.* stqd \$0,0\(\$1\) +.* stqd \$0,16\(\$1\) +.* brsl \$0,.* <00000000\.ovl_call\.f1_a1>.* +.*SPU_REL16 f1_a1 +.* brsl \$0,.* <00000000\.ovl_call\.f2_a1>.* +.*SPU_REL16 f2_a1 +.* brsl \$0,.* <00000000\.ovl_call\.f1_a2>.* +.*SPU_REL16 f1_a2 +#.* ila \$9,328 # 148 +.* ila \$9,352 # 160 +.*SPU_ADDR18 f2_a2 +.* bisl \$0,\$9 +.* ai \$1,\$1,32 # 20 +.* br 100 <_start> # 100 +.*SPU_REL16 _start 0000012c <f0>: - 12c: 35 00 00 00 bi \$0 +.* bi \$0 + +#00000130 <00000000\.ovl_call\.f1_a1>: +#.* brsl \$75,.* <__ovly_load>.* +#.*00 04 04 00.* +# +#00000138 <00000000\.ovl_call\.f2_a1>: +#.* brsl \$75,.* <__ovly_load>.* +#.*00 04 04 04.* +# +#00000140 <00000000\.ovl_call\.f1_a2>: +#.* brsl \$75,.* <__ovly_load>.* +#.*00 08 04 00.* +# +#00000148 <00000000\.ovl_call\.f2_a2>: +#.* brsl \$75,.* <__ovly_load>.* +#.*00 08 04 24.* +# +#00000150 <00000000\.ovl_call\.f4_a1>: +#.* brsl \$75,.* <__ovly_load>.* +#.*00 04 04 10.* +# +#00000158 <00000000.ovl_call.14:8>: +#.* brsl \$75,.* <__ovly_load>.* +#.*00 08 04 34.* 00000130 <00000000\.ovl_call\.f1_a1>: - 130: 42 02 00 4f ila \$79,1024 # 400 - 134: 32 00 02 80 br 148 .* - 134: SPU_REL16 \*ABS\*\+0x148 - -00000138 <00000000\.ovl_call\.f2_a1>: - 138: 42 02 02 4f ila \$79,1028 # 404 - 13c: 32 00 01 80 br 148 .* - 13c: SPU_REL16 \*ABS\*\+0x148 - -00000140 <00000000\.ovl_call\.f4_a1>: - 140: 42 02 08 4f ila \$79,1040 # 410 - 144: 40 20 00 00 nop \$0 - 148: 42 00 00 ce ila \$78,1 - 14c: 32 00 0a 80 br 1a0 <__ovly_load> # 1a0 - 14c: SPU_REL16 __ovly_load - -00000150 <00000000\.ovl_call\.f1_a2>: - 150: 42 02 00 4f ila \$79,1024 # 400 - 154: 32 00 02 80 br 168 .* - 154: SPU_REL16 \*ABS\*\+0x168 - -00000158 <00000000\.ovl_call\.f2_a2>: - 158: 42 02 12 4f ila \$79,1060 # 424 - 15c: 32 00 01 80 br 168 .* - 15c: SPU_REL16 \*ABS\*\+0x168 - -00000160 <00000000\.ovl_call\.14:8>: - 160: 42 02 1a 4f ila \$79,1076 # 434 - 164: 40 20 00 00 nop \$0 - 168: 42 00 01 4e ila \$78,2 - 16c: 32 00 06 80 br 1a0 <__ovly_load> # 1a0 - 16c: SPU_REL16 __ovly_load +.* ila \$78,1 +.* lnop +.* ila \$79,1024 # 400 +.* br .* <__ovly_load>.* + +00000140 <00000000\.ovl_call\.f2_a1>: +.* ila \$78,1 +.* lnop +.* ila \$79,1028 # 404 +.* br .* <__ovly_load>.* + +00000150 <00000000.ovl_call.f1_a2>: +.* ila \$78,2 +.* lnop +.* ila \$79,1024 # 400 +.* br .* <__ovly_load>.* + +00000160 <00000000\.ovl_call\.f2_a2>: +.* ila \$78,2 +.* lnop +.* ila \$79,1060 # 424 +.* br .* <__ovly_load>.* + +00000170 <00000000\.ovl_call\.f4_a1>: +.* ila \$78,1 +.* lnop +.* ila \$79,1040 # 410 +.* br .* <__ovly_load>.* + +00000180 <00000000.ovl_call.14:8>: +.* ila \$78,2 +.* lnop +.* ila \$79,1076 # 434 +.* br .* <__ovly_load>.* + #... [0-9a-f]+ <__ovly_return>: -[0-9a-f ]+: 3f e1 00 4e shlqbyi \$78,\$0,4 -[0-9a-f ]+: 3f e2 00 4f shlqbyi \$79,\$0,8 -[0-9a-f ]+: 25 00 27 ce biz \$78,\$79 - +#... [0-9a-f]+ <__ovly_load>: #... [0-9a-f]+ <_ovly_debug_event>: @@ -73,67 +98,75 @@ Disassembly of section \.text: Disassembly of section \.ov_a1: 00000400 <f1_a1>: - 400: 32 00 01 80 br 40c <f3_a1> # 40c - 400: SPU_REL16 f3_a1 +.* br .* <f3_a1>.* +.*SPU_REL16 f3_a1 00000404 <f2_a1>: - 404: 42 00 a0 03 ila \$3,320 # 140 - 404: SPU_ADDR18 f4_a1 - 408: 35 00 00 00 bi \$0 +#.* ila \$3,336 # 150 +.* ila \$3,368 # 170 +.*SPU_ADDR18 f4_a1 +.* bi \$0 0000040c <f3_a1>: - 40c: 35 00 00 00 bi \$0 +.* bi \$0 00000410 <f4_a1>: - 410: 35 00 00 00 bi \$0 +.* bi \$0 \.\.\. Disassembly of section \.ov_a2: 00000400 <f1_a2>: - 400: 24 00 40 80 stqd \$0,16\(\$1\) - 404: 24 ff 80 81 stqd \$1,-32\(\$1\) - 408: 1c f8 00 81 ai \$1,\$1,-32 - 40c: 33 7f a4 00 brsl \$0,12c <f0> # 12c - 40c: SPU_REL16 f0 - 410: 33 7f a4 00 brsl \$0,130 <00000000\.ovl_call\.f1_a1> # 130 - 410: SPU_REL16 f1_a1 - 414: 33 00 03 80 brsl \$0,430 <f3_a2> # 430 - 414: SPU_REL16 f3_a2 - 418: 34 00 c0 80 lqd \$0,48\(\$1\) # 30 - 41c: 1c 08 00 81 ai \$1,\$1,32 # 20 - 420: 35 00 00 00 bi \$0 +.* stqd \$0,16\(\$1\) +.* stqd \$1,-32\(\$1\) +.* ai \$1,\$1,-32 +.* brsl \$0,12c <f0> # 12c +.*SPU_REL16 f0 +.* brsl \$0,130 <00000000\.ovl_call\.f1_a1> # 130 +.*SPU_REL16 f1_a1 +.* brsl \$0,430 <f3_a2> # 430 +.*SPU_REL16 f3_a2 +.* lqd \$0,48\(\$1\) # 30 +.* ai \$1,\$1,32 # 20 +.* bi \$0 00000424 <f2_a2>: - 424: 41 00 00 03 ilhu \$3,0 - 424: SPU_ADDR16_HI f4_a2 - 428: 60 80 b0 03 iohl \$3,352 # 160 - 428: SPU_ADDR16_LO f4_a2 - 42c: 35 00 00 00 bi \$0 +.* ilhu \$3,0 +.*SPU_ADDR16_HI f4_a2 +#.* iohl \$3,344 # 158 +.* iohl \$3,384 # 180 +.*SPU_ADDR16_LO f4_a2 +.* bi \$0 00000430 <f3_a2>: - 430: 35 00 00 00 bi \$0 +.* bi \$0 00000434 <f4_a2>: - 434: 32 7f ff 80 br 430 <f3_a2> # 430 - 434: SPU_REL16 f3_a2 +.* br .* <f3_a2>.* +.*SPU_REL16 f3_a2 \.\.\. Disassembly of section .data: -00000440 <_ovly_table>: - 440: 00 00 04 00 .* - 444: 00 00 00 20 .* - 448: 00 00 02 f0 .* +00000440 <_ovly_table-0x10>: + \.\.\. 44c: 00 00 00 01 .* +00000450 <_ovly_table>: 450: 00 00 04 00 .* - 454: 00 00 00 40 .* - 458: 00 00 03 10 .* - 45c: 00 00 00 01 .* + 454: 00 00 00 20 .* +# 458: 00 00 03 40 .* + 458: 00 00 03 70 .* + 45c: 00 00 00 02 .* + 460: 00 00 04 00 .* + 464: 00 00 00 40 .* +# 468: 00 00 03 60 .* + 468: 00 00 03 90 .* + 46c: 00 00 00 02 .* + +00000470 <_ovly_buf_table>: + \.\.\. -00000460 <_ovly_buf_table>: - 460: 00 00 00 00 .* Disassembly of section \.toe: -00000470 <_EAR_>: +00000480 <_EAR_>: \.\.\. Disassembly of section \.note\.spu_name: diff --git a/ld/testsuite/ld-spu/ovl2.d b/ld/testsuite/ld-spu/ovl2.d index bf62e03..1cd1d33 100644 --- a/ld/testsuite/ld-spu/ovl2.d +++ b/ld/testsuite/ld-spu/ovl2.d @@ -7,40 +7,50 @@ Disassembly of section \.text: 00000100 <_start>: - 100: 33 00 06 00 brsl \$0,130 <00000000\.ovl_call\.f1_a1> # 130 - 100: SPU_REL16 f1_a1 - 104: 33 00 03 80 brsl \$0,120 <00000000\.ovl_call\.10:4> # 120 - 104: SPU_REL16 setjmp - 108: 32 7f ff 00 br 100 <_start> # 100 - 108: SPU_REL16 _start +.* brsl \$0,.* <00000000\.ovl_call\.f1_a1>.* +.*SPU_REL16 f1_a1 +.* brsl \$0,.* <00000000\.ovl_call\.10:4>.* +.*SPU_REL16 setjmp +.* br 100 <_start> # 100 +.*SPU_REL16 _start 0000010c <setjmp>: - 10c: 35 00 00 00 bi \$0 +.* bi \$0 00000110 <longjmp>: - 110: 35 00 00 00 bi \$0 - ... - -00000120 <00000000\.ovl_call.10:4>: - 120: 42 00 86 4f ila \$79,268 # 10c - 124: 40 20 00 00 nop \$0 - 128: 42 00 00 4e ila \$78,0 - 12c: 32 00 0a 80 br 180 <__ovly_load> # 180 - 12c: SPU_REL16 __ovly_load - -00000130 <00000000\.ovl_call.f1_a1>: - 130: 42 02 00 4f ila \$79,1024 # 400 - 134: 40 20 00 00 nop \$0 - 138: 42 00 00 ce ila \$78,1 - 13c: 32 00 08 80 br 180 <__ovly_load> # 180 - 13c: SPU_REL16 __ovly_load +.* bi \$0 +.* + +#00000118 <00000000\.ovl_call.f1_a1>: +#.* brsl \$75,.* <__ovly_load>.* +#.*00 04 04 00.* +# +#00000120 <00000000\.ovl_call.10:4>: +#.* brsl \$75,.* <__ovly_load>.* +#.*00 00 01 0c.* +# +#00000128 <_SPUEAR_f1_a2>: +#.* brsl \$75,.* <__ovly_load>.* +#.*00 08 04 00.* + +00000120 <00000000\.ovl_call.f1_a1>: +.* ila \$78,1 +.* lnop +.* ila \$79,1024 # 400 +.* br .* <__ovly_load>.* + +00000130 <00000000\.ovl_call.10:4>: +.* ila \$78,0 +.* lnop +.* ila \$79,268 # 10c +.* br .* <__ovly_load>.* 00000140 <_SPUEAR_f1_a2>: - 140: 42 02 00 4f ila \$79,1024 # 400 - 144: 40 20 00 00 nop \$0 - 148: 42 00 01 4e ila \$78,2 - 14c: 32 00 06 80 br 180 <__ovly_load> # 180 - 14c: SPU_REL16 __ovly_load +.* ila \$78,2 +.* lnop +.* ila \$79,1024 # 400 +.* br .* <__ovly_load>.* + #... Disassembly of section \.ov_a1: @@ -55,21 +65,27 @@ Disassembly of section \.ov_a2: \.\.\. Disassembly of section \.data: -00000410 <_ovly_table>: - 410: 00 00 04 00 .* - 414: 00 00 00 10 .* - 418: 00 00 02 d0 .* +00000410 <_ovly_table-0x10>: + \.\.\. 41c: 00 00 00 01 .* +00000420 <_ovly_table>: 420: 00 00 04 00 .* 424: 00 00 00 10 .* - 428: 00 00 02 e0 .* - 42c: 00 00 00 01 .* +# 428: 00 00 03 10 .* + 428: 00 00 03 30 .* + 42c: 00 00 00 02 .* + 430: 00 00 04 00 .* + 434: 00 00 00 10 .* +# 438: 00 00 03 20 .* + 438: 00 00 03 40 .* + 43c: 00 00 00 02 .* + +00000440 <_ovly_buf_table>: + \.\.\. -00000430 <_ovly_buf_table>: - 430: 00 00 00 00 .* Disassembly of section \.toe: -00000440 <_EAR_>: +00000450 <_EAR_>: \.\.\. Disassembly of section \.note\.spu_name: |