aboutsummaryrefslogtreecommitdiff
path: root/gdb/doc
diff options
context:
space:
mode:
authorStan Shebs <shebs@codesourcery.com>2013-09-16 18:00:34 +0000
committerStan Shebs <shebs@codesourcery.com>2013-09-16 18:00:34 +0000
commit0a7cfe2cf50b450d0cf9db16ee4bd027e08763e8 (patch)
treef03cdc93796ed3410f5dfe1c9e41989cee434455 /gdb/doc
parenta280dbd16004e14560b76141a1aaf1e4659dd33f (diff)
downloadgdb-0a7cfe2cf50b450d0cf9db16ee4bd027e08763e8.zip
gdb-0a7cfe2cf50b450d0cf9db16ee4bd027e08763e8.tar.gz
gdb-0a7cfe2cf50b450d0cf9db16ee4bd027e08763e8.tar.bz2
* README: Update references to writing code for GDB.
* configure.ac (build_warnings): Remove obsolete comment. * configure: Regenerate. * gdbarch.sh: Remove references to gdbint.texinfo. * gdbarch.h: Regenerate. * gdbtypes.c (objfile_type): Remove comments referencing internals manual and D10V. [gdb/doc] Remove the internals manual gdbint.texinfo. * Makefile.in (INFO_DEPS): Remove gdbint.info. (PDFFILES): Remove gdbint.pdf. (HTMLFILES): Remove gdbint/index.html. (HTMLFILES_INSTALL): Remove gdbint. (GDBINT_DOC_FILES): Remove. (dvi): Remove gdbint.dvi. (ps): Remove gdbint.ps. * gdbint.texinfo: Remove file. * gdb.texinfo (Maintenance Commands): Remove reference to gdbint.
Diffstat (limited to 'gdb/doc')
-rw-r--r--gdb/doc/ChangeLog13
-rw-r--r--gdb/doc/Makefile.in53
-rw-r--r--gdb/doc/gdb.texinfo3
-rw-r--r--gdb/doc/gdbint.texinfo8282
4 files changed, 20 insertions, 8331 deletions
diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
index e183332..f5e4a04 100644
--- a/gdb/doc/ChangeLog
+++ b/gdb/doc/ChangeLog
@@ -1,3 +1,16 @@
+2013-09-16 Stan Shebs <stan@codesourcery.com>
+
+ Remove the internals manual gdbint.texinfo.
+ * Makefile.in (INFO_DEPS): Remove gdbint.info.
+ (PDFFILES): Remove gdbint.pdf.
+ (HTMLFILES): Remove gdbint/index.html.
+ (HTMLFILES_INSTALL): Remove gdbint.
+ (GDBINT_DOC_FILES): Remove.
+ (dvi): Remove gdbint.dvi.
+ (ps): Remove gdbint.ps.
+ * gdbint.texinfo: Remove file.
+ * gdb.texinfo (Maintenance Commands): Remove reference to gdbint.
+
2013-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Convenience Functions): Mention new convenience
diff --git a/gdb/doc/Makefile.in b/gdb/doc/Makefile.in
index ba8dd39..60feae3 100644
--- a/gdb/doc/Makefile.in
+++ b/gdb/doc/Makefile.in
@@ -79,13 +79,13 @@ SET_TEXINPUTS = \
TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS
# Files which should be generated via 'info' and installed by 'install-info'
-INFO_DEPS = gdb.info gdbint.info stabs.info annotate.info
+INFO_DEPS = gdb.info stabs.info annotate.info
# Files which should be generated via 'pdf' and installed by 'install-pdf'
-PDFFILES = gdb.pdf gdbint.pdf stabs.pdf refcard.pdf annotate.pdf
+PDFFILES = gdb.pdf stabs.pdf refcard.pdf annotate.pdf
# Files which should be generated via 'html' and installed by 'install-html'
-HTMLFILES = gdb/index.html gdbint/index.html stabs/index.html annotate/index.html
-HTMLFILES_INSTALL = gdb gdbint stabs annotate
+HTMLFILES = gdb/index.html stabs/index.html annotate/index.html
+HTMLFILES_INSTALL = gdb stabs annotate
# There may be alternate predefined collections of switches to configure
# the GDB manual. Normally this is not done in synch with the software
@@ -133,18 +133,6 @@ GDB_DOC_FILES = \
$(GDB_DOC_SOURCE_INCLUDES) \
$(GDB_DOC_BUILD_INCLUDES)
-# Internals Manual
-GDBINT_DOC_SOURCE_INCLUDES = \
- $(srcdir)/fdl.texi \
- $(srcdir)/observer.texi
-GDBINT_DOC_BUILD_INCLUDES = \
- gdb-cfg.texi \
- GDBvn.texi
-GDBINT_DOC_FILES = \
- $(srcdir)/gdbint.texinfo \
- $(GDBINT_DOC_SOURCE_INCLUDES) \
- $(GDBINT_DOC_BUILD_INCLUDES)
-
# Stabs manual: All files
STABS_DOC_SOURCE_INCLUDES = \
$(srcdir)/fdl.texi
@@ -191,8 +179,8 @@ HAVE_NATIVE_GCORE_TARGET = @HAVE_NATIVE_GCORE_TARGET@
all:
info: $(INFO_DEPS)
-dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi annotate.dvi
-ps: gdb.ps gdbint.ps stabs.ps refcard.ps annotate.ps
+dvi: gdb.dvi stabs.dvi refcard.dvi annotate.dvi
+ps: gdb.ps stabs.ps refcard.ps annotate.ps
html: $(HTMLFILES)
pdf: $(PDFFILES)
man: $(MANS)
@@ -530,34 +518,6 @@ gdb.mm: $(GDB_DOC_FILES) links2roff
gdb/index.html: ${GDB_DOC_FILES}
$(MAKEHTML) $(MAKEHTMLFLAGS) $(READLINE_TEXI_INCFLAG) -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
-# Clean these up before each run. Avoids a catch 22 with not being
-# able to re-generate these files (to fix a corruption) because these
-# files contain a corruption.
-GDBINT_TEX_TMPS = gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
- gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
-
-# GDB INTERNALS MANUAL: TeX dvi file
-gdbint.dvi: $(GDBINT_DOC_FILES)
- rm -f $(GDBINT_TEX_TMPS)
- $(TEXI2DVI) -I $(srcdir) $(srcdir)/gdbint.texinfo
-
-gdbint.ps : gdbint.dvi
- $(DVIPS) -o $@ $?
-
-gdbint.pdf: $(GDBINT_DOC_FILES)
- rm -f $(GDBINT_TEX_TMPS)
- $(TEXI2DVI) --pdf -I $(srcdir) $(srcdir)/gdbint.texinfo
-
-# GDB INTERNALS MANUAL: info file
-
-gdbint.info: $(GDBINT_DOC_FILES)
- $(MAKEINFO_CMD) -I $(srcdir) -o gdbint.info $(srcdir)/gdbint.texinfo
-
-# GDB INTERNALS MANUAL: HTML file
-
-gdbint/index.html: $(GDBINT_DOC_FILES)
- $(MAKEHTML) $(MAKEHTMLFLAGS) -I $(srcdir) $(srcdir)/gdbint.texinfo
-
stabs.info: $(STABS_DOC_FILES)
$(MAKEINFO_CMD) -I $(srcdir) -o stabs.info $(srcdir)/stabs.texinfo
@@ -649,7 +609,6 @@ Makefile: Makefile.in $(host_makefile_frag) ../config.status
mostlyclean:
rm -f gdb.mm gdb.ms gdb.me links2roff
rm -f $(GDB_TEX_TMPS)
- rm -f $(GDBINT_TEX_TMPS)
rm -f $(STABS_TEX_TMPS)
rm -f $(ANNOTATE_TEX_TMPS)
rm -f sedref.dvi sedref.tex tmp.sed
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index 65f63e4..60d2877 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -36870,8 +36870,7 @@ including registers which aren't available on the target nor visible
to user; the command @code{maint print register-groups} includes the
groups that each register is a member of; and the command @code{maint
print remote-registers} includes the remote target's register numbers
-and offsets in the `G' packets. @xref{Registers,, Registers, gdbint,
-@value{GDBN} Internals}.
+and offsets in the `G' packets.
These commands take an optional parameter, a file name to which to
write the information.
diff --git a/gdb/doc/gdbint.texinfo b/gdb/doc/gdbint.texinfo
deleted file mode 100644
index b0f133f..0000000
--- a/gdb/doc/gdbint.texinfo
+++ /dev/null
@@ -1,8282 +0,0 @@
-\input texinfo @c -*- texinfo -*-
-@setfilename gdbint.info
-@include gdb-cfg.texi
-@settitle @value{GDBN} Internals
-@setchapternewpage off
-@dircategory Software development
-@direntry
-* Gdb-Internals: (gdbint). The GNU debugger's internals.
-@end direntry
-
-@copying
-Copyright @copyright{} 1990-2013 Free Software Foundation, Inc.
-Contributed by Cygnus Solutions. Written by John Gilmore.
-Second Edition by Stan Shebs.
-
-Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.3 or
-any later version published by the Free Software Foundation; with no
-Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
-Texts. A copy of the license is included in the section entitled ``GNU
-Free Documentation License''.
-@end copying
-
-@ifnottex
-This file documents the internals of the GNU debugger @value{GDBN}.
-
-@insertcopying
-@end ifnottex
-
-@syncodeindex vr fn
-
-@titlepage
-@title @value{GDBN} Internals
-@subtitle A guide to the internals of the GNU debugger
-@author John Gilmore
-@author Cygnus Solutions
-@author Second Edition:
-@author Stan Shebs
-@author Cygnus Solutions
-@page
-@tex
-\def\$#1${{#1}} % Kluge: collect RCS revision info without $...$
-\xdef\manvers{\$Revision$} % For use in headers, footers too
-{\parskip=0pt
-\hfill Cygnus Solutions\par
-\hfill \manvers\par
-\hfill \TeX{}info \texinfoversion\par
-}
-@end tex
-
-@vskip 0pt plus 1filll
-@insertcopying
-@end titlepage
-
-@contents
-
-@node Top
-@c Perhaps this should be the title of the document (but only for info,
-@c not for TeX). Existing GNU manuals seem inconsistent on this point.
-@top Scope of this Document
-
-This document documents the internals of the GNU debugger, @value{GDBN}. It
-includes description of @value{GDBN}'s key algorithms and operations, as well
-as the mechanisms that adapt @value{GDBN} to specific hosts and targets.
-
-@menu
-* Summary::
-* Overall Structure::
-* Algorithms::
-* User Interface::
-* libgdb::
-* Values::
-* Stack Frames::
-* Symbol Handling::
-* Language Support::
-* Host Definition::
-* Target Architecture Definition::
-* Target Descriptions::
-* Target Vector Definition::
-* Native Debugging::
-* Support Libraries::
-* Coding Standards::
-* Misc Guidelines::
-* Porting GDB::
-* Versions and Branches::
-* Start of New Year Procedure::
-* Releasing GDB::
-* Testsuite::
-* Hints::
-
-* GDB Observers:: @value{GDBN} Currently available observers
-* GNU Free Documentation License:: The license for this documentation
-* Concept Index::
-* Function and Variable Index::
-@end menu
-
-@node Summary
-@chapter Summary
-
-@menu
-* Requirements::
-* Contributors::
-@end menu
-
-@node Requirements
-@section Requirements
-@cindex requirements for @value{GDBN}
-
-Before diving into the internals, you should understand the formal
-requirements and other expectations for @value{GDBN}. Although some
-of these may seem obvious, there have been proposals for @value{GDBN}
-that have run counter to these requirements.
-
-First of all, @value{GDBN} is a debugger. It's not designed to be a
-front panel for embedded systems. It's not a text editor. It's not a
-shell. It's not a programming environment.
-
-@value{GDBN} is an interactive tool. Although a batch mode is
-available, @value{GDBN}'s primary role is to interact with a human
-programmer.
-
-@value{GDBN} should be responsive to the user. A programmer hot on
-the trail of a nasty bug, and operating under a looming deadline, is
-going to be very impatient of everything, including the response time
-to debugger commands.
-
-@value{GDBN} should be relatively permissive, such as for expressions.
-While the compiler should be picky (or have the option to be made
-picky), since source code lives for a long time usually, the
-programmer doing debugging shouldn't be spending time figuring out to
-mollify the debugger.
-
-@value{GDBN} will be called upon to deal with really large programs.
-Executable sizes of 50 to 100 megabytes occur regularly, and we've
-heard reports of programs approaching 1 gigabyte in size.
-
-@value{GDBN} should be able to run everywhere. No other debugger is
-available for even half as many configurations as @value{GDBN}
-supports.
-
-@node Contributors
-@section Contributors
-
-The first edition of this document was written by John Gilmore of
-Cygnus Solutions. The current second edition was written by Stan Shebs
-of Cygnus Solutions, who continues to update the manual.
-
-Over the years, many others have made additions and changes to this
-document. This section attempts to record the significant contributors
-to that effort. One of the virtues of free software is that everyone
-is free to contribute to it; with regret, we cannot actually
-acknowledge everyone here.
-
-@quotation
-@emph{Plea:} This section has only been added relatively recently (four
-years after publication of the second edition). Additions to this
-section are particularly welcome. If you or your friends (or enemies,
-to be evenhanded) have been unfairly omitted from this list, we would
-like to add your names!
-@end quotation
-
-A document such as this relies on being kept up to date by numerous
-small updates by contributing engineers as they make changes to the
-code base. The file @file{ChangeLog} in the @value{GDBN} distribution
-approximates a blow-by-blow account. The most prolific contributors to
-this important, but low profile task are Andrew Cagney (responsible
-for over half the entries), Daniel Jacobowitz, Mark Kettenis, Jim
-Blandy and Eli Zaretskii.
-
-Eli Zaretskii and Daniel Jacobowitz wrote the sections documenting
-watchpoints.
-
-Jeremy Bennett updated the sections on initializing a new architecture
-and register representation, and added the section on Frame Interpretation.
-
-
-@node Overall Structure
-
-@chapter Overall Structure
-
-@value{GDBN} consists of three major subsystems: user interface,
-symbol handling (the @dfn{symbol side}), and target system handling (the
-@dfn{target side}).
-
-The user interface consists of several actual interfaces, plus
-supporting code.
-
-The symbol side consists of object file readers, debugging info
-interpreters, symbol table management, source language expression
-parsing, type and value printing.
-
-The target side consists of execution control, stack frame analysis, and
-physical target manipulation.
-
-The target side/symbol side division is not formal, and there are a
-number of exceptions. For instance, core file support involves symbolic
-elements (the basic core file reader is in BFD) and target elements (it
-supplies the contents of memory and the values of registers). Instead,
-this division is useful for understanding how the minor subsystems
-should fit together.
-
-@section The Symbol Side
-
-The symbolic side of @value{GDBN} can be thought of as ``everything
-you can do in @value{GDBN} without having a live program running''.
-For instance, you can look at the types of variables, and evaluate
-many kinds of expressions.
-
-@section The Target Side
-
-The target side of @value{GDBN} is the ``bits and bytes manipulator''.
-Although it may make reference to symbolic info here and there, most
-of the target side will run with only a stripped executable
-available---or even no executable at all, in remote debugging cases.
-
-Operations such as disassembly, stack frame crawls, and register
-display, are able to work with no symbolic info at all. In some cases,
-such as disassembly, @value{GDBN} will use symbolic info to present addresses
-relative to symbols rather than as raw numbers, but it will work either
-way.
-
-@section Configurations
-
-@cindex host
-@cindex target
-@dfn{Host} refers to attributes of the system where @value{GDBN} runs.
-@dfn{Target} refers to the system where the program being debugged
-executes. In most cases they are the same machine, in which case a
-third type of @dfn{Native} attributes come into play.
-
-Defines and include files needed to build on the host are host
-support. Examples are tty support, system defined types, host byte
-order, host float format. These are all calculated by @code{autoconf}
-when the debugger is built.
-
-Defines and information needed to handle the target format are target
-dependent. Examples are the stack frame format, instruction set,
-breakpoint instruction, registers, and how to set up and tear down the stack
-to call a function.
-
-Information that is only needed when the host and target are the same,
-is native dependent. One example is Unix child process support; if the
-host and target are not the same, calling @code{fork} to start the target
-process is a bad idea. The various macros needed for finding the
-registers in the @code{upage}, running @code{ptrace}, and such are all
-in the native-dependent files.
-
-Another example of native-dependent code is support for features that
-are really part of the target environment, but which require
-@code{#include} files that are only available on the host system. Core
-file handling and @code{setjmp} handling are two common cases.
-
-When you want to make @value{GDBN} work as the traditional native debugger
-on a system, you will need to supply both target and native information.
-
-@section Source Tree Structure
-@cindex @value{GDBN} source tree structure
-
-The @value{GDBN} source directory has a mostly flat structure---there
-are only a few subdirectories. A file's name usually gives a hint as
-to what it does; for example, @file{stabsread.c} reads stabs,
-@file{dwarf2read.c} reads @sc{DWARF 2}, etc.
-
-Files that are related to some common task have names that share
-common substrings. For example, @file{*-thread.c} files deal with
-debugging threads on various platforms; @file{*read.c} files deal with
-reading various kinds of symbol and object files; @file{inf*.c} files
-deal with direct control of the @dfn{inferior program} (@value{GDBN}
-parlance for the program being debugged).
-
-There are several dozens of files in the @file{*-tdep.c} family.
-@samp{tdep} stands for @dfn{target-dependent code}---each of these
-files implements debug support for a specific target architecture
-(sparc, mips, etc). Usually, only one of these will be used in a
-specific @value{GDBN} configuration (sometimes two, closely related).
-
-Similarly, there are many @file{*-nat.c} files, each one for native
-debugging on a specific system (e.g., @file{sparc-linux-nat.c} is for
-native debugging of Sparc machines running the Linux kernel).
-
-The few subdirectories of the source tree are:
-
-@table @file
-@item cli
-Code that implements @dfn{CLI}, the @value{GDBN} Command-Line
-Interpreter. @xref{User Interface, Command Interpreter}.
-
-@item gdbserver
-Code for the @value{GDBN} remote server.
-
-@item gdbtk
-Code for Insight, the @value{GDBN} TK-based GUI front-end.
-
-@item mi
-The @dfn{GDB/MI}, the @value{GDBN} Machine Interface interpreter.
-
-@item signals
-Target signal translation code.
-
-@item tui
-Code for @dfn{TUI}, the @value{GDBN} Text-mode full-screen User
-Interface. @xref{User Interface, TUI}.
-@end table
-
-@node Algorithms
-
-@chapter Algorithms
-@cindex algorithms
-
-@value{GDBN} uses a number of debugging-specific algorithms. They are
-often not very complicated, but get lost in the thicket of special
-cases and real-world issues. This chapter describes the basic
-algorithms and mentions some of the specific target definitions that
-they use.
-
-@section Prologue Analysis
-
-@cindex prologue analysis
-@cindex call frame information
-@cindex CFI (call frame information)
-To produce a backtrace and allow the user to manipulate older frames'
-variables and arguments, @value{GDBN} needs to find the base addresses
-of older frames, and discover where those frames' registers have been
-saved. Since a frame's ``callee-saves'' registers get saved by
-younger frames if and when they're reused, a frame's registers may be
-scattered unpredictably across younger frames. This means that
-changing the value of a register-allocated variable in an older frame
-may actually entail writing to a save slot in some younger frame.
-
-Modern versions of GCC emit Dwarf call frame information (``CFI''),
-which describes how to find frame base addresses and saved registers.
-But CFI is not always available, so as a fallback @value{GDBN} uses a
-technique called @dfn{prologue analysis} to find frame sizes and saved
-registers. A prologue analyzer disassembles the function's machine
-code starting from its entry point, and looks for instructions that
-allocate frame space, save the stack pointer in a frame pointer
-register, save registers, and so on. Obviously, this can't be done
-accurately in general, but it's tractable to do well enough to be very
-helpful. Prologue analysis predates the GNU toolchain's support for
-CFI; at one time, prologue analysis was the only mechanism
-@value{GDBN} used for stack unwinding at all, when the function
-calling conventions didn't specify a fixed frame layout.
-
-In the olden days, function prologues were generated by hand-written,
-target-specific code in GCC, and treated as opaque and untouchable by
-optimizers. Looking at this code, it was usually straightforward to
-write a prologue analyzer for @value{GDBN} that would accurately
-understand all the prologues GCC would generate. However, over time
-GCC became more aggressive about instruction scheduling, and began to
-understand more about the semantics of the prologue instructions
-themselves; in response, @value{GDBN}'s analyzers became more complex
-and fragile. Keeping the prologue analyzers working as GCC (and the
-instruction sets themselves) evolved became a substantial task.
-
-@cindex @file{prologue-value.c}
-@cindex abstract interpretation of function prologues
-@cindex pseudo-evaluation of function prologues
-To try to address this problem, the code in @file{prologue-value.h}
-and @file{prologue-value.c} provides a general framework for writing
-prologue analyzers that are simpler and more robust than ad-hoc
-analyzers. When we analyze a prologue using the prologue-value
-framework, we're really doing ``abstract interpretation'' or
-``pseudo-evaluation'': running the function's code in simulation, but
-using conservative approximations of the values registers and memory
-would hold when the code actually runs. For example, if our function
-starts with the instruction:
-
-@example
-addi r1, 42 # add 42 to r1
-@end example
-@noindent
-we don't know exactly what value will be in @code{r1} after executing
-this instruction, but we do know it'll be 42 greater than its original
-value.
-
-If we then see an instruction like:
-
-@example
-addi r1, 22 # add 22 to r1
-@end example
-@noindent
-we still don't know what @code{r1's} value is, but again, we can say
-it is now 64 greater than its original value.
-
-If the next instruction were:
-
-@example
-mov r2, r1 # set r2 to r1's value
-@end example
-@noindent
-then we can say that @code{r2's} value is now the original value of
-@code{r1} plus 64.
-
-It's common for prologues to save registers on the stack, so we'll
-need to track the values of stack frame slots, as well as the
-registers. So after an instruction like this:
-
-@example
-mov (fp+4), r2
-@end example
-@noindent
-then we'd know that the stack slot four bytes above the frame pointer
-holds the original value of @code{r1} plus 64.
-
-And so on.
-
-Of course, this can only go so far before it gets unreasonable. If we
-wanted to be able to say anything about the value of @code{r1} after
-the instruction:
-
-@example
-xor r1, r3 # exclusive-or r1 and r3, place result in r1
-@end example
-@noindent
-then things would get pretty complex. But remember, we're just doing
-a conservative approximation; if exclusive-or instructions aren't
-relevant to prologues, we can just say @code{r1}'s value is now
-``unknown''. We can ignore things that are too complex, if that loss of
-information is acceptable for our application.
-
-So when we say ``conservative approximation'' here, what we mean is an
-approximation that is either accurate, or marked ``unknown'', but
-never inaccurate.
-
-Using this framework, a prologue analyzer is simply an interpreter for
-machine code, but one that uses conservative approximations for the
-contents of registers and memory instead of actual values. Starting
-from the function's entry point, you simulate instructions up to the
-current PC, or an instruction that you don't know how to simulate.
-Now you can examine the state of the registers and stack slots you've
-kept track of.
-
-@itemize @bullet
-
-@item
-To see how large your stack frame is, just check the value of the
-stack pointer register; if it's the original value of the SP
-minus a constant, then that constant is the stack frame's size.
-If the SP's value has been marked as ``unknown'', then that means
-the prologue has done something too complex for us to track, and
-we don't know the frame size.
-
-@item
-To see where we've saved the previous frame's registers, we just
-search the values we've tracked --- stack slots, usually, but
-registers, too, if you want --- for something equal to the register's
-original value. If the calling conventions suggest a standard place
-to save a given register, then we can check there first, but really,
-anything that will get us back the original value will probably work.
-@end itemize
-
-This does take some work. But prologue analyzers aren't
-quick-and-simple pattern patching to recognize a few fixed prologue
-forms any more; they're big, hairy functions. Along with inferior
-function calls, prologue analysis accounts for a substantial portion
-of the time needed to stabilize a @value{GDBN} port. So it's
-worthwhile to look for an approach that will be easier to understand
-and maintain. In the approach described above:
-
-@itemize @bullet
-
-@item
-It's easier to see that the analyzer is correct: you just see
-whether the analyzer properly (albeit conservatively) simulates
-the effect of each instruction.
-
-@item
-It's easier to extend the analyzer: you can add support for new
-instructions, and know that you haven't broken anything that
-wasn't already broken before.
-
-@item
-It's orthogonal: to gather new information, you don't need to
-complicate the code for each instruction. As long as your domain
-of conservative values is already detailed enough to tell you
-what you need, then all the existing instruction simulations are
-already gathering the right data for you.
-
-@end itemize
-
-The file @file{prologue-value.h} contains detailed comments explaining
-the framework and how to use it.
-
-
-@section Breakpoint Handling
-
-@cindex breakpoints
-In general, a breakpoint is a user-designated location in the program
-where the user wants to regain control if program execution ever reaches
-that location.
-
-There are two main ways to implement breakpoints; either as ``hardware''
-breakpoints or as ``software'' breakpoints.
-
-@cindex hardware breakpoints
-@cindex program counter
-Hardware breakpoints are sometimes available as a builtin debugging
-features with some chips. Typically these work by having dedicated
-register into which the breakpoint address may be stored. If the PC
-(shorthand for @dfn{program counter})
-ever matches a value in a breakpoint registers, the CPU raises an
-exception and reports it to @value{GDBN}.
-
-Another possibility is when an emulator is in use; many emulators
-include circuitry that watches the address lines coming out from the
-processor, and force it to stop if the address matches a breakpoint's
-address.
-
-A third possibility is that the target already has the ability to do
-breakpoints somehow; for instance, a ROM monitor may do its own
-software breakpoints. So although these are not literally ``hardware
-breakpoints'', from @value{GDBN}'s point of view they work the same;
-@value{GDBN} need not do anything more than set the breakpoint and wait
-for something to happen.
-
-Since they depend on hardware resources, hardware breakpoints may be
-limited in number; when the user asks for more, @value{GDBN} will
-start trying to set software breakpoints. (On some architectures,
-notably the 32-bit x86 platforms, @value{GDBN} cannot always know
-whether there's enough hardware resources to insert all the hardware
-breakpoints and watchpoints. On those platforms, @value{GDBN} prints
-an error message only when the program being debugged is continued.)
-
-@cindex software breakpoints
-Software breakpoints require @value{GDBN} to do somewhat more work.
-The basic theory is that @value{GDBN} will replace a program
-instruction with a trap, illegal divide, or some other instruction
-that will cause an exception, and then when it's encountered,
-@value{GDBN} will take the exception and stop the program. When the
-user says to continue, @value{GDBN} will restore the original
-instruction, single-step, re-insert the trap, and continue on.
-
-Since it literally overwrites the program being tested, the program area
-must be writable, so this technique won't work on programs in ROM. It
-can also distort the behavior of programs that examine themselves,
-although such a situation would be highly unusual.
-
-Also, the software breakpoint instruction should be the smallest size of
-instruction, so it doesn't overwrite an instruction that might be a jump
-target, and cause disaster when the program jumps into the middle of the
-breakpoint instruction. (Strictly speaking, the breakpoint must be no
-larger than the smallest interval between instructions that may be jump
-targets; perhaps there is an architecture where only even-numbered
-instructions may jumped to.) Note that it's possible for an instruction
-set not to have any instructions usable for a software breakpoint,
-although in practice only the ARC has failed to define such an
-instruction.
-
-Basic breakpoint object handling is in @file{breakpoint.c}. However,
-much of the interesting breakpoint action is in @file{infrun.c}.
-
-@table @code
-@cindex insert or remove software breakpoint
-@findex target_remove_breakpoint
-@findex target_insert_breakpoint
-@item target_remove_breakpoint (@var{bp_tgt})
-@itemx target_insert_breakpoint (@var{bp_tgt})
-Insert or remove a software breakpoint at address
-@code{@var{bp_tgt}->placed_address}. Returns zero for success,
-non-zero for failure. On input, @var{bp_tgt} contains the address of the
-breakpoint, and is otherwise initialized to zero. The fields of the
-@code{struct bp_target_info} pointed to by @var{bp_tgt} are updated
-to contain other information about the breakpoint on output. The field
-@code{placed_address} may be updated if the breakpoint was placed at a
-related address; the field @code{shadow_contents} contains the real
-contents of the bytes where the breakpoint has been inserted,
-if reading memory would return the breakpoint instead of the
-underlying memory; the field @code{shadow_len} is the length of
-memory cached in @code{shadow_contents}, if any; and the field
-@code{placed_size} is optionally set and used by the target, if
-it could differ from @code{shadow_len}.
-
-For example, the remote target @samp{Z0} packet does not require
-shadowing memory, so @code{shadow_len} is left at zero. However,
-the length reported by @code{gdbarch_breakpoint_from_pc} is cached in
-@code{placed_size}, so that a matching @samp{z0} packet can be
-used to remove the breakpoint.
-
-@cindex insert or remove hardware breakpoint
-@findex target_remove_hw_breakpoint
-@findex target_insert_hw_breakpoint
-@item target_remove_hw_breakpoint (@var{bp_tgt})
-@itemx target_insert_hw_breakpoint (@var{bp_tgt})
-Insert or remove a hardware-assisted breakpoint at address
-@code{@var{bp_tgt}->placed_address}. Returns zero for success,
-non-zero for failure. See @code{target_insert_breakpoint} for
-a description of the @code{struct bp_target_info} pointed to by
-@var{bp_tgt}; the @code{shadow_contents} and
-@code{shadow_len} members are not used for hardware breakpoints,
-but @code{placed_size} may be.
-@end table
-
-@section Single Stepping
-
-@section Stepping over runtime loader dynamic symbol resolution code
-@cindex Procedure Linkage Table, stepping over
-@cindex PLT, stepping over
-@cindex resolver, stepping over
-
-If the program uses ELF-style shared libraries, then calls to
-functions in shared libraries go through stubs, which live in a table
-called the PLT (@dfn{Procedure Linkage Table}). The first time the
-function is called, the stub sends control to the dynamic linker,
-which looks up the function's real address, patches the stub so that
-future calls will go directly to the function, and then passes control
-to the function.
-
-If we are stepping at the source level, we don't want to see any of
-this --- we just want to skip over the stub and the dynamic linker.
-The simple approach is to single-step until control leaves the dynamic
-linker.
-
-However, on some systems (e.g., Red Hat's 5.2 distribution) the
-dynamic linker calls functions in the shared C library, so you can't
-tell from the PC alone whether the dynamic linker is still running.
-In this case, we use a step-resume breakpoint to get us past the
-dynamic linker, as if we were using @code{next} to step over a
-function call.
-
-The @code{in_solib_dynsym_resolve_code} function says whether we're in
-the dynamic linker code or not. Normally, this means we single-step.
-However, if @code{gdbarch_skip_solib_resolver} then returns non-zero,
-then its value is an address where we can place a step-resume
-breakpoint to get past the linker's symbol resolution function.
-
-The @code{in_dynsym_resolve_code} hook of the @code{target_so_ops}
-vector can generally be implemented in a pretty portable way, by
-comparing the PC against the address ranges of the dynamic linker's
-sections.
-
-The @code{gdbarch_skip_solib_resolver} implementation is generally
-going to be system-specific, since it depends on internal details of
-the dynamic linker. It's usually not too hard to figure out where to
-put a breakpoint, but it certainly isn't portable.
-@code{gdbarch_skip_solib_resolver} should do plenty of sanity
-checking. If it can't figure things out, returning zero and getting
-the (possibly confusing) stepping behavior is better than signaling an
-error, which will obscure the change in the inferior's state. */
-
-@section Signal Handling
-
-@section Thread Handling
-
-@section Inferior Function Calls
-
-@section Longjmp Support
-
-@cindex @code{longjmp} debugging
-@value{GDBN} has support for figuring out that the target is doing a
-@code{longjmp} and for stopping at the target of the jump, if we are
-stepping. This is done with a few specialized internal breakpoints,
-which are visible in the output of the @samp{maint info breakpoint}
-command.
-
-@findex gdbarch_get_longjmp_target
-To make this work, you need to define a function called
-@code{gdbarch_get_longjmp_target}, which will examine the
-@code{jmp_buf} structure and extract the @code{longjmp} target address.
-Since @code{jmp_buf} is target specific and typically defined in a
-target header not available to @value{GDBN}, you will need to
-determine the offset of the PC manually and return that; many targets
-define a @code{jb_pc_offset} field in the tdep structure to save the
-value once calculated.
-
-@section Watchpoints
-@cindex watchpoints
-
-Watchpoints are a special kind of breakpoints (@pxref{Algorithms,
-breakpoints}) which break when data is accessed rather than when some
-instruction is executed. When you have data which changes without
-your knowing what code does that, watchpoints are the silver bullet to
-hunt down and kill such bugs.
-
-@cindex hardware watchpoints
-@cindex software watchpoints
-Watchpoints can be either hardware-assisted or not; the latter type is
-known as ``software watchpoints.'' @value{GDBN} always uses
-hardware-assisted watchpoints if they are available, and falls back on
-software watchpoints otherwise. Typical situations where @value{GDBN}
-will use software watchpoints are:
-
-@itemize @bullet
-@item
-The watched memory region is too large for the underlying hardware
-watchpoint support. For example, each x86 debug register can watch up
-to 4 bytes of memory, so trying to watch data structures whose size is
-more than 16 bytes will cause @value{GDBN} to use software
-watchpoints.
-
-@item
-The value of the expression to be watched depends on data held in
-registers (as opposed to memory).
-
-@item
-Too many different watchpoints requested. (On some architectures,
-this situation is impossible to detect until the debugged program is
-resumed.) Note that x86 debug registers are used both for hardware
-breakpoints and for watchpoints, so setting too many hardware
-breakpoints might cause watchpoint insertion to fail.
-
-@item
-No hardware-assisted watchpoints provided by the target
-implementation.
-@end itemize
-
-Software watchpoints are very slow, since @value{GDBN} needs to
-single-step the program being debugged and test the value of the
-watched expression(s) after each instruction. The rest of this
-section is mostly irrelevant for software watchpoints.
-
-When the inferior stops, @value{GDBN} tries to establish, among other
-possible reasons, whether it stopped due to a watchpoint being hit.
-It first uses @code{STOPPED_BY_WATCHPOINT} to see if any watchpoint
-was hit. If not, all watchpoint checking is skipped.
-
-Then @value{GDBN} calls @code{target_stopped_data_address} exactly
-once. This method returns the address of the watchpoint which
-triggered, if the target can determine it. If the triggered address
-is available, @value{GDBN} compares the address returned by this
-method with each watched memory address in each active watchpoint.
-For data-read and data-access watchpoints, @value{GDBN} announces
-every watchpoint that watches the triggered address as being hit.
-For this reason, data-read and data-access watchpoints
-@emph{require} that the triggered address be available; if not, read
-and access watchpoints will never be considered hit. For data-write
-watchpoints, if the triggered address is available, @value{GDBN}
-considers only those watchpoints which match that address;
-otherwise, @value{GDBN} considers all data-write watchpoints. For
-each data-write watchpoint that @value{GDBN} considers, it evaluates
-the expression whose value is being watched, and tests whether the
-watched value has changed. Watchpoints whose watched values have
-changed are announced as hit.
-
-@c FIXME move these to the main lists of target/native defns
-
-@value{GDBN} uses several macros and primitives to support hardware
-watchpoints:
-
-@table @code
-@findex TARGET_CAN_USE_HARDWARE_WATCHPOINT
-@item TARGET_CAN_USE_HARDWARE_WATCHPOINT (@var{type}, @var{count}, @var{other})
-Return the number of hardware watchpoints of type @var{type} that are
-possible to be set. The value is positive if @var{count} watchpoints
-of this type can be set, zero if setting watchpoints of this type is
-not supported, and negative if @var{count} is more than the maximum
-number of watchpoints of type @var{type} that can be set. @var{other}
-is non-zero if other types of watchpoints are currently enabled (there
-are architectures which cannot set watchpoints of different types at
-the same time).
-
-@findex TARGET_REGION_OK_FOR_HW_WATCHPOINT
-@item TARGET_REGION_OK_FOR_HW_WATCHPOINT (@var{addr}, @var{len})
-Return non-zero if hardware watchpoints can be used to watch a region
-whose address is @var{addr} and whose length in bytes is @var{len}.
-
-@cindex insert or remove hardware watchpoint
-@findex target_insert_watchpoint
-@findex target_remove_watchpoint
-@item target_insert_watchpoint (@var{addr}, @var{len}, @var{type})
-@itemx target_remove_watchpoint (@var{addr}, @var{len}, @var{type})
-Insert or remove a hardware watchpoint starting at @var{addr}, for
-@var{len} bytes. @var{type} is the watchpoint type, one of the
-possible values of the enumerated data type @code{target_hw_bp_type},
-defined by @file{breakpoint.h} as follows:
-
-@smallexample
- enum target_hw_bp_type
- @{
- hw_write = 0, /* Common (write) HW watchpoint */
- hw_read = 1, /* Read HW watchpoint */
- hw_access = 2, /* Access (read or write) HW watchpoint */
- hw_execute = 3 /* Execute HW breakpoint */
- @};
-@end smallexample
-
-@noindent
-These two macros should return 0 for success, non-zero for failure.
-
-@findex target_stopped_data_address
-@item target_stopped_data_address (@var{addr_p})
-If the inferior has some watchpoint that triggered, place the address
-associated with the watchpoint at the location pointed to by
-@var{addr_p} and return non-zero. Otherwise, return zero. This
-is required for data-read and data-access watchpoints. It is
-not required for data-write watchpoints, but @value{GDBN} uses
-it to improve handling of those also.
-
-@value{GDBN} will only call this method once per watchpoint stop,
-immediately after calling @code{STOPPED_BY_WATCHPOINT}. If the
-target's watchpoint indication is sticky, i.e., stays set after
-resuming, this method should clear it. For instance, the x86 debug
-control register has sticky triggered flags.
-
-@findex target_watchpoint_addr_within_range
-@item target_watchpoint_addr_within_range (@var{target}, @var{addr}, @var{start}, @var{length})
-Check whether @var{addr} (as returned by @code{target_stopped_data_address})
-lies within the hardware-defined watchpoint region described by
-@var{start} and @var{length}. This only needs to be provided if the
-granularity of a watchpoint is greater than one byte, i.e., if the
-watchpoint can also trigger on nearby addresses outside of the watched
-region.
-
-@findex HAVE_STEPPABLE_WATCHPOINT
-@item HAVE_STEPPABLE_WATCHPOINT
-If defined to a non-zero value, it is not necessary to disable a
-watchpoint to step over it. Like @code{gdbarch_have_nonsteppable_watchpoint},
-this is usually set when watchpoints trigger at the instruction
-which will perform an interesting read or write. It should be
-set if there is a temporary disable bit which allows the processor
-to step over the interesting instruction without raising the
-watchpoint exception again.
-
-@findex gdbarch_have_nonsteppable_watchpoint
-@item int gdbarch_have_nonsteppable_watchpoint (@var{gdbarch})
-If it returns a non-zero value, @value{GDBN} should disable a
-watchpoint to step the inferior over it. This is usually set when
-watchpoints trigger at the instruction which will perform an
-interesting read or write.
-
-@findex HAVE_CONTINUABLE_WATCHPOINT
-@item HAVE_CONTINUABLE_WATCHPOINT
-If defined to a non-zero value, it is possible to continue the
-inferior after a watchpoint has been hit. This is usually set
-when watchpoints trigger at the instruction following an interesting
-read or write.
-
-@findex STOPPED_BY_WATCHPOINT
-@item STOPPED_BY_WATCHPOINT (@var{wait_status})
-Return non-zero if stopped by a watchpoint. @var{wait_status} is of
-the type @code{struct target_waitstatus}, defined by @file{target.h}.
-Normally, this macro is defined to invoke the function pointed to by
-the @code{to_stopped_by_watchpoint} member of the structure (of the
-type @code{target_ops}, defined on @file{target.h}) that describes the
-target-specific operations; @code{to_stopped_by_watchpoint} ignores
-the @var{wait_status} argument.
-
-@value{GDBN} does not require the non-zero value returned by
-@code{STOPPED_BY_WATCHPOINT} to be 100% correct, so if a target cannot
-determine for sure whether the inferior stopped due to a watchpoint,
-it could return non-zero ``just in case''.
-@end table
-
-@subsection Watchpoints and Threads
-@cindex watchpoints, with threads
-
-@value{GDBN} only supports process-wide watchpoints, which trigger
-in all threads. @value{GDBN} uses the thread ID to make watchpoints
-act as if they were thread-specific, but it cannot set hardware
-watchpoints that only trigger in a specific thread. Therefore, even
-if the target supports threads, per-thread debug registers, and
-watchpoints which only affect a single thread, it should set the
-per-thread debug registers for all threads to the same value. On
-@sc{gnu}/Linux native targets, this is accomplished by using
-@code{ALL_LWPS} in @code{target_insert_watchpoint} and
-@code{target_remove_watchpoint} and by using
-@code{linux_set_new_thread} to register a handler for newly created
-threads.
-
-@value{GDBN}'s @sc{gnu}/Linux support only reports a single event
-at a time, although multiple events can trigger simultaneously for
-multi-threaded programs. When multiple events occur, @file{linux-nat.c}
-queues subsequent events and returns them the next time the program
-is resumed. This means that @code{STOPPED_BY_WATCHPOINT} and
-@code{target_stopped_data_address} only need to consult the current
-thread's state---the thread indicated by @code{inferior_ptid}. If
-two threads have hit watchpoints simultaneously, those routines
-will be called a second time for the second thread.
-
-@subsection x86 Watchpoints
-@cindex x86 debug registers
-@cindex watchpoints, on x86
-
-The 32-bit Intel x86 (a.k.a.@: ia32) processors feature special debug
-registers designed to facilitate debugging. @value{GDBN} provides a
-generic library of functions that x86-based ports can use to implement
-support for watchpoints and hardware-assisted breakpoints. This
-subsection documents the x86 watchpoint facilities in @value{GDBN}.
-
-(At present, the library functions read and write debug registers directly, and are
-thus only available for native configurations.)
-
-To use the generic x86 watchpoint support, a port should do the
-following:
-
-@itemize @bullet
-@findex I386_USE_GENERIC_WATCHPOINTS
-@item
-Define the macro @code{I386_USE_GENERIC_WATCHPOINTS} somewhere in the
-target-dependent headers.
-
-@item
-Include the @file{config/i386/nm-i386.h} header file @emph{after}
-defining @code{I386_USE_GENERIC_WATCHPOINTS}.
-
-@item
-Add @file{i386-nat.o} to the value of the Make variable
-@code{NATDEPFILES} (@pxref{Native Debugging, NATDEPFILES}).
-
-@item
-Provide implementations for the @code{I386_DR_LOW_*} macros described
-below. Typically, each macro should call a target-specific function
-which does the real work.
-@end itemize
-
-The x86 watchpoint support works by maintaining mirror images of the
-debug registers. Values are copied between the mirror images and the
-real debug registers via a set of macros which each target needs to
-provide:
-
-@table @code
-@findex I386_DR_LOW_SET_CONTROL
-@item I386_DR_LOW_SET_CONTROL (@var{val})
-Set the Debug Control (DR7) register to the value @var{val}.
-
-@findex I386_DR_LOW_SET_ADDR
-@item I386_DR_LOW_SET_ADDR (@var{idx}, @var{addr})
-Put the address @var{addr} into the debug register number @var{idx}.
-
-@findex I386_DR_LOW_RESET_ADDR
-@item I386_DR_LOW_RESET_ADDR (@var{idx})
-Reset (i.e.@: zero out) the address stored in the debug register
-number @var{idx}.
-
-@findex I386_DR_LOW_GET_STATUS
-@item I386_DR_LOW_GET_STATUS
-Return the value of the Debug Status (DR6) register. This value is
-used immediately after it is returned by
-@code{I386_DR_LOW_GET_STATUS}, so as to support per-thread status
-register values.
-@end table
-
-For each one of the 4 debug registers (whose indices are from 0 to 3)
-that store addresses, a reference count is maintained by @value{GDBN},
-to allow sharing of debug registers by several watchpoints. This
-allows users to define several watchpoints that watch the same
-expression, but with different conditions and/or commands, without
-wasting debug registers which are in short supply. @value{GDBN}
-maintains the reference counts internally, targets don't have to do
-anything to use this feature.
-
-The x86 debug registers can each watch a region that is 1, 2, or 4
-bytes long. The ia32 architecture requires that each watched region
-be appropriately aligned: 2-byte region on 2-byte boundary, 4-byte
-region on 4-byte boundary. However, the x86 watchpoint support in
-@value{GDBN} can watch unaligned regions and regions larger than 4
-bytes (up to 16 bytes) by allocating several debug registers to watch
-a single region. This allocation of several registers per a watched
-region is also done automatically without target code intervention.
-
-The generic x86 watchpoint support provides the following API for the
-@value{GDBN}'s application code:
-
-@table @code
-@findex i386_region_ok_for_watchpoint
-@item i386_region_ok_for_watchpoint (@var{addr}, @var{len})
-The macro @code{TARGET_REGION_OK_FOR_HW_WATCHPOINT} is set to call
-this function. It counts the number of debug registers required to
-watch a given region, and returns a non-zero value if that number is
-less than 4, the number of debug registers available to x86
-processors.
-
-@findex i386_stopped_data_address
-@item i386_stopped_data_address (@var{addr_p})
-The target function
-@code{target_stopped_data_address} is set to call this function.
-This
-function examines the breakpoint condition bits in the DR6 Debug
-Status register, as returned by the @code{I386_DR_LOW_GET_STATUS}
-macro, and returns the address associated with the first bit that is
-set in DR6.
-
-@findex i386_stopped_by_watchpoint
-@item i386_stopped_by_watchpoint (void)
-The macro @code{STOPPED_BY_WATCHPOINT}
-is set to call this function. The
-argument passed to @code{STOPPED_BY_WATCHPOINT} is ignored. This
-function examines the breakpoint condition bits in the DR6 Debug
-Status register, as returned by the @code{I386_DR_LOW_GET_STATUS}
-macro, and returns true if any bit is set. Otherwise, false is
-returned.
-
-@findex i386_insert_watchpoint
-@findex i386_remove_watchpoint
-@item i386_insert_watchpoint (@var{addr}, @var{len}, @var{type})
-@itemx i386_remove_watchpoint (@var{addr}, @var{len}, @var{type})
-Insert or remove a watchpoint. The macros
-@code{target_insert_watchpoint} and @code{target_remove_watchpoint}
-are set to call these functions. @code{i386_insert_watchpoint} first
-looks for a debug register which is already set to watch the same
-region for the same access types; if found, it just increments the
-reference count of that debug register, thus implementing debug
-register sharing between watchpoints. If no such register is found,
-the function looks for a vacant debug register, sets its mirrored
-value to @var{addr}, sets the mirrored value of DR7 Debug Control
-register as appropriate for the @var{len} and @var{type} parameters,
-and then passes the new values of the debug register and DR7 to the
-inferior by calling @code{I386_DR_LOW_SET_ADDR} and
-@code{I386_DR_LOW_SET_CONTROL}. If more than one debug register is
-required to cover the given region, the above process is repeated for
-each debug register.
-
-@code{i386_remove_watchpoint} does the opposite: it resets the address
-in the mirrored value of the debug register and its read/write and
-length bits in the mirrored value of DR7, then passes these new
-values to the inferior via @code{I386_DR_LOW_RESET_ADDR} and
-@code{I386_DR_LOW_SET_CONTROL}. If a register is shared by several
-watchpoints, each time a @code{i386_remove_watchpoint} is called, it
-decrements the reference count, and only calls
-@code{I386_DR_LOW_RESET_ADDR} and @code{I386_DR_LOW_SET_CONTROL} when
-the count goes to zero.
-
-@findex i386_insert_hw_breakpoint
-@findex i386_remove_hw_breakpoint
-@item i386_insert_hw_breakpoint (@var{bp_tgt})
-@itemx i386_remove_hw_breakpoint (@var{bp_tgt})
-These functions insert and remove hardware-assisted breakpoints. The
-macros @code{target_insert_hw_breakpoint} and
-@code{target_remove_hw_breakpoint} are set to call these functions.
-The argument is a @code{struct bp_target_info *}, as described in
-the documentation for @code{target_insert_breakpoint}.
-These functions work like @code{i386_insert_watchpoint} and
-@code{i386_remove_watchpoint}, respectively, except that they set up
-the debug registers to watch instruction execution, and each
-hardware-assisted breakpoint always requires exactly one debug
-register.
-
-@findex i386_cleanup_dregs
-@item i386_cleanup_dregs (void)
-This function clears all the reference counts, addresses, and control
-bits in the mirror images of the debug registers. It doesn't affect
-the actual debug registers in the inferior process.
-@end table
-
-@noindent
-@strong{Notes:}
-@enumerate 1
-@item
-x86 processors support setting watchpoints on I/O reads or writes.
-However, since no target supports this (as of March 2001), and since
-@code{enum target_hw_bp_type} doesn't even have an enumeration for I/O
-watchpoints, this feature is not yet available to @value{GDBN} running
-on x86.
-
-@item
-x86 processors can enable watchpoints locally, for the current task
-only, or globally, for all the tasks. For each debug register,
-there's a bit in the DR7 Debug Control register that determines
-whether the associated address is watched locally or globally. The
-current implementation of x86 watchpoint support in @value{GDBN}
-always sets watchpoints to be locally enabled, since global
-watchpoints might interfere with the underlying OS and are probably
-unavailable in many platforms.
-@end enumerate
-
-@section Checkpoints
-@cindex checkpoints
-@cindex restart
-In the abstract, a checkpoint is a point in the execution history of
-the program, which the user may wish to return to at some later time.
-
-Internally, a checkpoint is a saved copy of the program state, including
-whatever information is required in order to restore the program to that
-state at a later time. This can be expected to include the state of
-registers and memory, and may include external state such as the state
-of open files and devices.
-
-There are a number of ways in which checkpoints may be implemented
-in gdb, e.g.@: as corefiles, as forked processes, and as some opaque
-method implemented on the target side.
-
-A corefile can be used to save an image of target memory and register
-state, which can in principle be restored later --- but corefiles do
-not typically include information about external entities such as
-open files. Currently this method is not implemented in gdb.
-
-A forked process can save the state of user memory and registers,
-as well as some subset of external (kernel) state. This method
-is used to implement checkpoints on Linux, and in principle might
-be used on other systems.
-
-Some targets, e.g.@: simulators, might have their own built-in
-method for saving checkpoints, and gdb might be able to take
-advantage of that capability without necessarily knowing any
-details of how it is done.
-
-
-@section Observing changes in @value{GDBN} internals
-@cindex observer pattern interface
-@cindex notifications about changes in internals
-
-In order to function properly, several modules need to be notified when
-some changes occur in the @value{GDBN} internals. Traditionally, these
-modules have relied on several paradigms, the most common ones being
-hooks and gdb-events. Unfortunately, none of these paradigms was
-versatile enough to become the standard notification mechanism in
-@value{GDBN}. The fact that they only supported one ``client'' was also
-a strong limitation.
-
-A new paradigm, based on the Observer pattern of the @cite{Design
-Patterns} book, has therefore been implemented. The goal was to provide
-a new interface overcoming the issues with the notification mechanisms
-previously available. This new interface needed to be strongly typed,
-easy to extend, and versatile enough to be used as the standard
-interface when adding new notifications.
-
-See @ref{GDB Observers} for a brief description of the observers
-currently implemented in GDB. The rationale for the current
-implementation is also briefly discussed.
-
-@node User Interface
-
-@chapter User Interface
-
-@value{GDBN} has several user interfaces, of which the traditional
-command-line interface is perhaps the most familiar.
-
-@section Command Interpreter
-
-@cindex command interpreter
-@cindex CLI
-The command interpreter in @value{GDBN} is fairly simple. It is designed to
-allow for the set of commands to be augmented dynamically, and also
-has a recursive subcommand capability, where the first argument to
-a command may itself direct a lookup on a different command list.
-
-For instance, the @samp{set} command just starts a lookup on the
-@code{setlist} command list, while @samp{set thread} recurses
-to the @code{set_thread_cmd_list}.
-
-@findex add_cmd
-@findex add_com
-To add commands in general, use @code{add_cmd}. @code{add_com} adds to
-the main command list, and should be used for those commands. The usual
-place to add commands is in the @code{_initialize_@var{xyz}} routines at
-the ends of most source files.
-
-@findex add_setshow_cmd
-@findex add_setshow_cmd_full
-To add paired @samp{set} and @samp{show} commands, use
-@code{add_setshow_cmd} or @code{add_setshow_cmd_full}. The former is
-a slightly simpler interface which is useful when you don't need to
-further modify the new command structures, while the latter returns
-the new command structures for manipulation.
-
-@cindex deprecating commands
-@findex deprecate_cmd
-Before removing commands from the command set it is a good idea to
-deprecate them for some time. Use @code{deprecate_cmd} on commands or
-aliases to set the deprecated flag. @code{deprecate_cmd} takes a
-@code{struct cmd_list_element} as it's first argument. You can use the
-return value from @code{add_com} or @code{add_cmd} to deprecate the
-command immediately after it is created.
-
-The first time a command is used the user will be warned and offered a
-replacement (if one exists). Note that the replacement string passed to
-@code{deprecate_cmd} should be the full name of the command, i.e., the
-entire string the user should type at the command line.
-
-@anchor{UI-Independent Output}
-@section UI-Independent Output---the @code{ui_out} Functions
-@c This section is based on the documentation written by Fernando
-@c Nasser <fnasser@redhat.com>.
-
-@cindex @code{ui_out} functions
-The @code{ui_out} functions present an abstraction level for the
-@value{GDBN} output code. They hide the specifics of different user
-interfaces supported by @value{GDBN}, and thus free the programmer
-from the need to write several versions of the same code, one each for
-every UI, to produce output.
-
-@subsection Overview and Terminology
-
-In general, execution of each @value{GDBN} command produces some sort
-of output, and can even generate an input request.
-
-Output can be generated for the following purposes:
-
-@itemize @bullet
-@item
-to display a @emph{result} of an operation;
-
-@item
-to convey @emph{info} or produce side-effects of a requested
-operation;
-
-@item
-to provide a @emph{notification} of an asynchronous event (including
-progress indication of a prolonged asynchronous operation);
-
-@item
-to display @emph{error messages} (including warnings);
-
-@item
-to show @emph{debug data};
-
-@item
-to @emph{query} or prompt a user for input (a special case).
-@end itemize
-
-@noindent
-This section mainly concentrates on how to build result output,
-although some of it also applies to other kinds of output.
-
-Generation of output that displays the results of an operation
-involves one or more of the following:
-
-@itemize @bullet
-@item
-output of the actual data
-
-@item
-formatting the output as appropriate for console output, to make it
-easily readable by humans
-
-@item
-machine oriented formatting--a more terse formatting to allow for easy
-parsing by programs which read @value{GDBN}'s output
-
-@item
-annotation, whose purpose is to help legacy GUIs to identify interesting
-parts in the output
-@end itemize
-
-The @code{ui_out} routines take care of the first three aspects.
-Annotations are provided by separate annotation routines. Note that use
-of annotations for an interface between a GUI and @value{GDBN} is
-deprecated.
-
-Output can be in the form of a single item, which we call a @dfn{field};
-a @dfn{list} consisting of identical fields; a @dfn{tuple} consisting of
-non-identical fields; or a @dfn{table}, which is a tuple consisting of a
-header and a body. In a BNF-like form:
-
-@table @code
-@item <table> @expansion{}
-@code{<header> <body>}
-@item <header> @expansion{}
-@code{@{ <column> @}}
-@item <column> @expansion{}
-@code{<width> <alignment> <title>}
-@item <body> @expansion{}
-@code{@{<row>@}}
-@end table
-
-
-@subsection General Conventions
-
-Most @code{ui_out} routines are of type @code{void}, the exceptions are
-@code{ui_out_stream_new} (which returns a pointer to the newly created
-object) and the @code{make_cleanup} routines.
-
-The first parameter is always the @code{ui_out} vector object, a pointer
-to a @code{struct ui_out}.
-
-The @var{format} parameter is like in @code{printf} family of functions.
-When it is present, there must also be a variable list of arguments
-sufficient used to satisfy the @code{%} specifiers in the supplied
-format.
-
-When a character string argument is not used in a @code{ui_out} function
-call, a @code{NULL} pointer has to be supplied instead.
-
-
-@subsection Table, Tuple and List Functions
-
-@cindex list output functions
-@cindex table output functions
-@cindex tuple output functions
-This section introduces @code{ui_out} routines for building lists,
-tuples and tables. The routines to output the actual data items
-(fields) are presented in the next section.
-
-To recap: A @dfn{tuple} is a sequence of @dfn{fields}, each field
-containing information about an object; a @dfn{list} is a sequence of
-fields where each field describes an identical object.
-
-Use the @dfn{table} functions when your output consists of a list of
-rows (tuples) and the console output should include a heading. Use this
-even when you are listing just one object but you still want the header.
-
-@cindex nesting level in @code{ui_out} functions
-Tables can not be nested. Tuples and lists can be nested up to a
-maximum of five levels.
-
-The overall structure of the table output code is something like this:
-
-@smallexample
- ui_out_table_begin
- ui_out_table_header
- @dots{}
- ui_out_table_body
- ui_out_tuple_begin
- ui_out_field_*
- @dots{}
- ui_out_tuple_end
- @dots{}
- ui_out_table_end
-@end smallexample
-
-Here is the description of table-, tuple- and list-related @code{ui_out}
-functions:
-
-@deftypefun void ui_out_table_begin (struct ui_out *@var{uiout}, int @var{nbrofcols}, int @var{nr_rows}, const char *@var{tblid})
-The function @code{ui_out_table_begin} marks the beginning of the output
-of a table. It should always be called before any other @code{ui_out}
-function for a given table. @var{nbrofcols} is the number of columns in
-the table. @var{nr_rows} is the number of rows in the table.
-@var{tblid} is an optional string identifying the table. The string
-pointed to by @var{tblid} is copied by the implementation of
-@code{ui_out_table_begin}, so the application can free the string if it
-was @code{malloc}ed.
-
-The companion function @code{ui_out_table_end}, described below, marks
-the end of the table's output.
-@end deftypefun
-
-@deftypefun void ui_out_table_header (struct ui_out *@var{uiout}, int @var{width}, enum ui_align @var{alignment}, const char *@var{colhdr})
-@code{ui_out_table_header} provides the header information for a single
-table column. You call this function several times, one each for every
-column of the table, after @code{ui_out_table_begin}, but before
-@code{ui_out_table_body}.
-
-The value of @var{width} gives the column width in characters. The
-value of @var{alignment} is one of @code{left}, @code{center}, and
-@code{right}, and it specifies how to align the header: left-justify,
-center, or right-justify it. @var{colhdr} points to a string that
-specifies the column header; the implementation copies that string, so
-column header strings in @code{malloc}ed storage can be freed after the
-call.
-@end deftypefun
-
-@deftypefun void ui_out_table_body (struct ui_out *@var{uiout})
-This function delimits the table header from the table body.
-@end deftypefun
-
-@deftypefun void ui_out_table_end (struct ui_out *@var{uiout})
-This function signals the end of a table's output. It should be called
-after the table body has been produced by the list and field output
-functions.
-
-There should be exactly one call to @code{ui_out_table_end} for each
-call to @code{ui_out_table_begin}, otherwise the @code{ui_out} functions
-will signal an internal error.
-@end deftypefun
-
-The output of the tuples that represent the table rows must follow the
-call to @code{ui_out_table_body} and precede the call to
-@code{ui_out_table_end}. You build a tuple by calling
-@code{ui_out_tuple_begin} and @code{ui_out_tuple_end}, with suitable
-calls to functions which actually output fields between them.
-
-@deftypefun void ui_out_tuple_begin (struct ui_out *@var{uiout}, const char *@var{id})
-This function marks the beginning of a tuple output. @var{id} points
-to an optional string that identifies the tuple; it is copied by the
-implementation, and so strings in @code{malloc}ed storage can be freed
-after the call.
-@end deftypefun
-
-@deftypefun void ui_out_tuple_end (struct ui_out *@var{uiout})
-This function signals an end of a tuple output. There should be exactly
-one call to @code{ui_out_tuple_end} for each call to
-@code{ui_out_tuple_begin}, otherwise an internal @value{GDBN} error will
-be signaled.
-@end deftypefun
-
-@deftypefun {struct cleanup *} make_cleanup_ui_out_tuple_begin_end (struct ui_out *@var{uiout}, const char *@var{id})
-This function first opens the tuple and then establishes a cleanup
-(@pxref{Misc Guidelines, Cleanups}) to close the tuple.
-It provides a convenient and correct implementation of the
-non-portable@footnote{The function cast is not portable ISO C.} code sequence:
-@smallexample
-struct cleanup *old_cleanup;
-ui_out_tuple_begin (uiout, "...");
-old_cleanup = make_cleanup ((void(*)(void *)) ui_out_tuple_end,
- uiout);
-@end smallexample
-@end deftypefun
-
-@deftypefun void ui_out_list_begin (struct ui_out *@var{uiout}, const char *@var{id})
-This function marks the beginning of a list output. @var{id} points to
-an optional string that identifies the list; it is copied by the
-implementation, and so strings in @code{malloc}ed storage can be freed
-after the call.
-@end deftypefun
-
-@deftypefun void ui_out_list_end (struct ui_out *@var{uiout})
-This function signals an end of a list output. There should be exactly
-one call to @code{ui_out_list_end} for each call to
-@code{ui_out_list_begin}, otherwise an internal @value{GDBN} error will
-be signaled.
-@end deftypefun
-
-@deftypefun {struct cleanup *} make_cleanup_ui_out_list_begin_end (struct ui_out *@var{uiout}, const char *@var{id})
-Similar to @code{make_cleanup_ui_out_tuple_begin_end}, this function
-opens a list and then establishes cleanup
-(@pxref{Misc Guidelines, Cleanups})
-that will close the list.
-@end deftypefun
-
-@subsection Item Output Functions
-
-@cindex item output functions
-@cindex field output functions
-@cindex data output
-The functions described below produce output for the actual data
-items, or fields, which contain information about the object.
-
-Choose the appropriate function accordingly to your particular needs.
-
-@deftypefun void ui_out_field_fmt (struct ui_out *@var{uiout}, char *@var{fldname}, char *@var{format}, ...)
-This is the most general output function. It produces the
-representation of the data in the variable-length argument list
-according to formatting specifications in @var{format}, a
-@code{printf}-like format string. The optional argument @var{fldname}
-supplies the name of the field. The data items themselves are
-supplied as additional arguments after @var{format}.
-
-This generic function should be used only when it is not possible to
-use one of the specialized versions (see below).
-@end deftypefun
-
-@deftypefun void ui_out_field_int (struct ui_out *@var{uiout}, const char *@var{fldname}, int @var{value})
-This function outputs a value of an @code{int} variable. It uses the
-@code{"%d"} output conversion specification. @var{fldname} specifies
-the name of the field.
-@end deftypefun
-
-@deftypefun void ui_out_field_fmt_int (struct ui_out *@var{uiout}, int @var{width}, enum ui_align @var{alignment}, const char *@var{fldname}, int @var{value})
-This function outputs a value of an @code{int} variable. It differs from
-@code{ui_out_field_int} in that the caller specifies the desired @var{width} and @var{alignment} of the output.
-@var{fldname} specifies
-the name of the field.
-@end deftypefun
-
-@deftypefun void ui_out_field_core_addr (struct ui_out *@var{uiout}, const char *@var{fldname}, struct gdbarch *@var{gdbarch}, CORE_ADDR @var{address})
-This function outputs an address as appropriate for @var{gdbarch}.
-@end deftypefun
-
-@deftypefun void ui_out_field_string (struct ui_out *@var{uiout}, const char *@var{fldname}, const char *@var{string})
-This function outputs a string using the @code{"%s"} conversion
-specification.
-@end deftypefun
-
-Sometimes, there's a need to compose your output piece by piece using
-functions that operate on a stream, such as @code{value_print} or
-@code{fprintf_symbol_filtered}. These functions accept an argument of
-the type @code{struct ui_file *}, a pointer to a @code{ui_file} object
-used to store the data stream used for the output. When you use one
-of these functions, you need a way to pass their results stored in a
-@code{ui_file} object to the @code{ui_out} functions. To this end,
-you first create a @code{ui_stream} object by calling
-@code{ui_out_stream_new}, pass the @code{stream} member of that
-@code{ui_stream} object to @code{value_print} and similar functions,
-and finally call @code{ui_out_field_stream} to output the field you
-constructed. When the @code{ui_stream} object is no longer needed,
-you should destroy it and free its memory by calling
-@code{ui_out_stream_delete}.
-
-@deftypefun {struct ui_stream *} ui_out_stream_new (struct ui_out *@var{uiout})
-This function creates a new @code{ui_stream} object which uses the
-same output methods as the @code{ui_out} object whose pointer is
-passed in @var{uiout}. It returns a pointer to the newly created
-@code{ui_stream} object.
-@end deftypefun
-
-@deftypefun void ui_out_stream_delete (struct ui_stream *@var{streambuf})
-This functions destroys a @code{ui_stream} object specified by
-@var{streambuf}.
-@end deftypefun
-
-@deftypefun void ui_out_field_stream (struct ui_out *@var{uiout}, const char *@var{fieldname}, struct ui_stream *@var{streambuf})
-This function consumes all the data accumulated in
-@code{streambuf->stream} and outputs it like
-@code{ui_out_field_string} does. After a call to
-@code{ui_out_field_stream}, the accumulated data no longer exists, but
-the stream is still valid and may be used for producing more fields.
-@end deftypefun
-
-@strong{Important:} If there is any chance that your code could bail
-out before completing output generation and reaching the point where
-@code{ui_out_stream_delete} is called, it is necessary to set up a
-cleanup, to avoid leaking memory and other resources. Here's a
-skeleton code to do that:
-
-@smallexample
- struct ui_stream *mybuf = ui_out_stream_new (uiout);
- struct cleanup *old = make_cleanup (ui_out_stream_delete, mybuf);
- ...
- do_cleanups (old);
-@end smallexample
-
-If the function already has the old cleanup chain set (for other kinds
-of cleanups), you just have to add your cleanup to it:
-
-@smallexample
- mybuf = ui_out_stream_new (uiout);
- make_cleanup (ui_out_stream_delete, mybuf);
-@end smallexample
-
-Note that with cleanups in place, you should not call
-@code{ui_out_stream_delete} directly, or you would attempt to free the
-same buffer twice.
-
-@subsection Utility Output Functions
-
-@deftypefun void ui_out_field_skip (struct ui_out *@var{uiout}, const char *@var{fldname})
-This function skips a field in a table. Use it if you have to leave
-an empty field without disrupting the table alignment. The argument
-@var{fldname} specifies a name for the (missing) filed.
-@end deftypefun
-
-@deftypefun void ui_out_text (struct ui_out *@var{uiout}, const char *@var{string})
-This function outputs the text in @var{string} in a way that makes it
-easy to be read by humans. For example, the console implementation of
-this method filters the text through a built-in pager, to prevent it
-from scrolling off the visible portion of the screen.
-
-Use this function for printing relatively long chunks of text around
-the actual field data: the text it produces is not aligned according
-to the table's format. Use @code{ui_out_field_string} to output a
-string field, and use @code{ui_out_message}, described below, to
-output short messages.
-@end deftypefun
-
-@deftypefun void ui_out_spaces (struct ui_out *@var{uiout}, int @var{nspaces})
-This function outputs @var{nspaces} spaces. It is handy to align the
-text produced by @code{ui_out_text} with the rest of the table or
-list.
-@end deftypefun
-
-@deftypefun void ui_out_message (struct ui_out *@var{uiout}, int @var{verbosity}, const char *@var{format}, ...)
-This function produces a formatted message, provided that the current
-verbosity level is at least as large as given by @var{verbosity}. The
-current verbosity level is specified by the user with the @samp{set
-verbositylevel} command.@footnote{As of this writing (April 2001),
-setting verbosity level is not yet implemented, and is always returned
-as zero. So calling @code{ui_out_message} with a @var{verbosity}
-argument more than zero will cause the message to never be printed.}
-@end deftypefun
-
-@deftypefun void ui_out_wrap_hint (struct ui_out *@var{uiout}, char *@var{indent})
-This function gives the console output filter (a paging filter) a hint
-of where to break lines which are too long. Ignored for all other
-output consumers. @var{indent}, if non-@code{NULL}, is the string to
-be printed to indent the wrapped text on the next line; it must remain
-accessible until the next call to @code{ui_out_wrap_hint}, or until an
-explicit newline is produced by one of the other functions. If
-@var{indent} is @code{NULL}, the wrapped text will not be indented.
-@end deftypefun
-
-@deftypefun void ui_out_flush (struct ui_out *@var{uiout})
-This function flushes whatever output has been accumulated so far, if
-the UI buffers output.
-@end deftypefun
-
-
-@subsection Examples of Use of @code{ui_out} functions
-
-@cindex using @code{ui_out} functions
-@cindex @code{ui_out} functions, usage examples
-This section gives some practical examples of using the @code{ui_out}
-functions to generalize the old console-oriented code in
-@value{GDBN}. The examples all come from functions defined on the
-@file{breakpoints.c} file.
-
-This example, from the @code{breakpoint_1} function, shows how to
-produce a table.
-
-The original code was:
-
-@smallexample
- if (!found_a_breakpoint++)
- @{
- annotate_breakpoints_headers ();
-
- annotate_field (0);
- printf_filtered ("Num ");
- annotate_field (1);
- printf_filtered ("Type ");
- annotate_field (2);
- printf_filtered ("Disp ");
- annotate_field (3);
- printf_filtered ("Enb ");
- if (addressprint)
- @{
- annotate_field (4);
- printf_filtered ("Address ");
- @}
- annotate_field (5);
- printf_filtered ("What\n");
-
- annotate_breakpoints_table ();
- @}
-@end smallexample
-
-Here's the new version:
-
-@smallexample
- nr_printable_breakpoints = @dots{};
-
- if (addressprint)
- ui_out_table_begin (ui, 6, nr_printable_breakpoints, "BreakpointTable");
- else
- ui_out_table_begin (ui, 5, nr_printable_breakpoints, "BreakpointTable");
-
- if (nr_printable_breakpoints > 0)
- annotate_breakpoints_headers ();
- if (nr_printable_breakpoints > 0)
- annotate_field (0);
- ui_out_table_header (uiout, 3, ui_left, "number", "Num"); /* 1 */
- if (nr_printable_breakpoints > 0)
- annotate_field (1);
- ui_out_table_header (uiout, 14, ui_left, "type", "Type"); /* 2 */
- if (nr_printable_breakpoints > 0)
- annotate_field (2);
- ui_out_table_header (uiout, 4, ui_left, "disp", "Disp"); /* 3 */
- if (nr_printable_breakpoints > 0)
- annotate_field (3);
- ui_out_table_header (uiout, 3, ui_left, "enabled", "Enb"); /* 4 */
- if (addressprint)
- @{
- if (nr_printable_breakpoints > 0)
- annotate_field (4);
- if (print_address_bits <= 32)
- ui_out_table_header (uiout, 10, ui_left, "addr", "Address");/* 5 */
- else
- ui_out_table_header (uiout, 18, ui_left, "addr", "Address");/* 5 */
- @}
- if (nr_printable_breakpoints > 0)
- annotate_field (5);
- ui_out_table_header (uiout, 40, ui_noalign, "what", "What"); /* 6 */
- ui_out_table_body (uiout);
- if (nr_printable_breakpoints > 0)
- annotate_breakpoints_table ();
-@end smallexample
-
-This example, from the @code{print_one_breakpoint} function, shows how
-to produce the actual data for the table whose structure was defined
-in the above example. The original code was:
-
-@smallexample
- annotate_record ();
- annotate_field (0);
- printf_filtered ("%-3d ", b->number);
- annotate_field (1);
- if ((int)b->type > (sizeof(bptypes)/sizeof(bptypes[0]))
- || ((int) b->type != bptypes[(int) b->type].type))
- internal_error ("bptypes table does not describe type #%d.",
- (int)b->type);
- printf_filtered ("%-14s ", bptypes[(int)b->type].description);
- annotate_field (2);
- printf_filtered ("%-4s ", bpdisps[(int)b->disposition]);
- annotate_field (3);
- printf_filtered ("%-3c ", bpenables[(int)b->enable]);
- @dots{}
-@end smallexample
-
-This is the new version:
-
-@smallexample
- annotate_record ();
- ui_out_tuple_begin (uiout, "bkpt");
- annotate_field (0);
- ui_out_field_int (uiout, "number", b->number);
- annotate_field (1);
- if (((int) b->type > (sizeof (bptypes) / sizeof (bptypes[0])))
- || ((int) b->type != bptypes[(int) b->type].type))
- internal_error ("bptypes table does not describe type #%d.",
- (int) b->type);
- ui_out_field_string (uiout, "type", bptypes[(int)b->type].description);
- annotate_field (2);
- ui_out_field_string (uiout, "disp", bpdisps[(int)b->disposition]);
- annotate_field (3);
- ui_out_field_fmt (uiout, "enabled", "%c", bpenables[(int)b->enable]);
- @dots{}
-@end smallexample
-
-This example, also from @code{print_one_breakpoint}, shows how to
-produce a complicated output field using the @code{print_expression}
-functions which requires a stream to be passed. It also shows how to
-automate stream destruction with cleanups. The original code was:
-
-@smallexample
- annotate_field (5);
- print_expression (b->exp, gdb_stdout);
-@end smallexample
-
-The new version is:
-
-@smallexample
- struct ui_stream *stb = ui_out_stream_new (uiout);
- struct cleanup *old_chain = make_cleanup_ui_out_stream_delete (stb);
- ...
- annotate_field (5);
- print_expression (b->exp, stb->stream);
- ui_out_field_stream (uiout, "what", local_stream);
-@end smallexample
-
-This example, also from @code{print_one_breakpoint}, shows how to use
-@code{ui_out_text} and @code{ui_out_field_string}. The original code
-was:
-
-@smallexample
- annotate_field (5);
- if (b->dll_pathname == NULL)
- printf_filtered ("<any library> ");
- else
- printf_filtered ("library \"%s\" ", b->dll_pathname);
-@end smallexample
-
-It became:
-
-@smallexample
- annotate_field (5);
- if (b->dll_pathname == NULL)
- @{
- ui_out_field_string (uiout, "what", "<any library>");
- ui_out_spaces (uiout, 1);
- @}
- else
- @{
- ui_out_text (uiout, "library \"");
- ui_out_field_string (uiout, "what", b->dll_pathname);
- ui_out_text (uiout, "\" ");
- @}
-@end smallexample
-
-The following example from @code{print_one_breakpoint} shows how to
-use @code{ui_out_field_int} and @code{ui_out_spaces}. The original
-code was:
-
-@smallexample
- annotate_field (5);
- if (b->forked_inferior_pid != 0)
- printf_filtered ("process %d ", b->forked_inferior_pid);
-@end smallexample
-
-It became:
-
-@smallexample
- annotate_field (5);
- if (b->forked_inferior_pid != 0)
- @{
- ui_out_text (uiout, "process ");
- ui_out_field_int (uiout, "what", b->forked_inferior_pid);
- ui_out_spaces (uiout, 1);
- @}
-@end smallexample
-
-Here's an example of using @code{ui_out_field_string}. The original
-code was:
-
-@smallexample
- annotate_field (5);
- if (b->exec_pathname != NULL)
- printf_filtered ("program \"%s\" ", b->exec_pathname);
-@end smallexample
-
-It became:
-
-@smallexample
- annotate_field (5);
- if (b->exec_pathname != NULL)
- @{
- ui_out_text (uiout, "program \"");
- ui_out_field_string (uiout, "what", b->exec_pathname);
- ui_out_text (uiout, "\" ");
- @}
-@end smallexample
-
-Finally, here's an example of printing an address. The original code:
-
-@smallexample
- annotate_field (4);
- printf_filtered ("%s ",
- hex_string_custom ((unsigned long) b->address, 8));
-@end smallexample
-
-It became:
-
-@smallexample
- annotate_field (4);
- ui_out_field_core_addr (uiout, "Address", b->address);
-@end smallexample
-
-
-@section Console Printing
-
-@section TUI
-
-@node libgdb
-
-@chapter libgdb
-
-@section libgdb 1.0
-@cindex @code{libgdb}
-@code{libgdb} 1.0 was an abortive project of years ago. The theory was
-to provide an API to @value{GDBN}'s functionality.
-
-@section libgdb 2.0
-@cindex @code{libgdb}
-@code{libgdb} 2.0 is an ongoing effort to update @value{GDBN} so that is
-better able to support graphical and other environments.
-
-Since @code{libgdb} development is on-going, its architecture is still
-evolving. The following components have so far been identified:
-
-@itemize @bullet
-@item
-Observer - @file{gdb-events.h}.
-@item
-Builder - @file{ui-out.h}
-@item
-Event Loop - @file{event-loop.h}
-@item
-Library - @file{gdb.h}
-@end itemize
-
-The model that ties these components together is described below.
-
-@section The @code{libgdb} Model
-
-A client of @code{libgdb} interacts with the library in two ways.
-
-@itemize @bullet
-@item
-As an observer (using @file{gdb-events}) receiving notifications from
-@code{libgdb} of any internal state changes (break point changes, run
-state, etc).
-@item
-As a client querying @code{libgdb} (using the @file{ui-out} builder) to
-obtain various status values from @value{GDBN}.
-@end itemize
-
-Since @code{libgdb} could have multiple clients (e.g., a GUI supporting
-the existing @value{GDBN} CLI), those clients must co-operate when
-controlling @code{libgdb}. In particular, a client must ensure that
-@code{libgdb} is idle (i.e.@: no other client is using @code{libgdb})
-before responding to a @file{gdb-event} by making a query.
-
-@section CLI support
-
-At present @value{GDBN}'s CLI is very much entangled in with the core of
-@code{libgdb}. Consequently, a client wishing to include the CLI in
-their interface needs to carefully co-ordinate its own and the CLI's
-requirements.
-
-It is suggested that the client set @code{libgdb} up to be bi-modal
-(alternate between CLI and client query modes). The notes below sketch
-out the theory:
-
-@itemize @bullet
-@item
-The client registers itself as an observer of @code{libgdb}.
-@item
-The client create and install @code{cli-out} builder using its own
-versions of the @code{ui-file} @code{gdb_stderr}, @code{gdb_stdtarg} and
-@code{gdb_stdout} streams.
-@item
-The client creates a separate custom @code{ui-out} builder that is only
-used while making direct queries to @code{libgdb}.
-@end itemize
-
-When the client receives input intended for the CLI, it simply passes it
-along. Since the @code{cli-out} builder is installed by default, all
-the CLI output in response to that command is routed (pronounced rooted)
-through to the client controlled @code{gdb_stdout} et.@: al.@: streams.
-At the same time, the client is kept abreast of internal changes by
-virtue of being a @code{libgdb} observer.
-
-The only restriction on the client is that it must wait until
-@code{libgdb} becomes idle before initiating any queries (using the
-client's custom builder).
-
-@section @code{libgdb} components
-
-@subheading Observer - @file{gdb-events.h}
-@file{gdb-events} provides the client with a very raw mechanism that can
-be used to implement an observer. At present it only allows for one
-observer and that observer must, internally, handle the need to delay
-the processing of any event notifications until after @code{libgdb} has
-finished the current command.
-
-@subheading Builder - @file{ui-out.h}
-@file{ui-out} provides the infrastructure necessary for a client to
-create a builder. That builder is then passed down to @code{libgdb}
-when doing any queries.
-
-@subheading Event Loop - @file{event-loop.h}
-@c There could be an entire section on the event-loop
-@file{event-loop}, currently non-re-entrant, provides a simple event
-loop. A client would need to either plug its self into this loop or,
-implement a new event-loop that @value{GDBN} would use.
-
-The event-loop will eventually be made re-entrant. This is so that
-@value{GDBN} can better handle the problem of some commands blocking
-instead of returning.
-
-@subheading Library - @file{gdb.h}
-@file{libgdb} is the most obvious component of this system. It provides
-the query interface. Each function is parameterized by a @code{ui-out}
-builder. The result of the query is constructed using that builder
-before the query function returns.
-
-@node Values
-@chapter Values
-@section Values
-
-@cindex values
-@cindex @code{value} structure
-@value{GDBN} uses @code{struct value}, or @dfn{values}, as an internal
-abstraction for the representation of a variety of inferior objects
-and @value{GDBN} convenience objects.
-
-Values have an associated @code{struct type}, that describes a virtual
-view of the raw data or object stored in or accessed through the
-value.
-
-A value is in addition discriminated by its lvalue-ness, given its
-@code{enum lval_type} enumeration type:
-
-@cindex @code{lval_type} enumeration, for values.
-@table @code
-@item @code{not_lval}
-This value is not an lval. It can't be assigned to.
-
-@item @code{lval_memory}
-This value represents an object in memory.
-
-@item @code{lval_register}
-This value represents an object that lives in a register.
-
-@item @code{lval_internalvar}
-Represents the value of an internal variable.
-
-@item @code{lval_internalvar_component}
-Represents part of a @value{GDBN} internal variable. E.g., a
-structure field.
-
-@cindex computed values
-@item @code{lval_computed}
-These are ``computed'' values. They allow creating specialized value
-objects for specific purposes, all abstracted away from the core value
-support code. The creator of such a value writes specialized
-functions to handle the reading and writing to/from the value's
-backend data, and optionally, a ``copy operator'' and a
-``destructor''.
-
-Pointers to these functions are stored in a @code{struct lval_funcs}
-instance (declared in @file{value.h}), and passed to the
-@code{allocate_computed_value} function, as in the example below.
-
-@smallexample
-static void
-nil_value_read (struct value *v)
-@{
- /* This callback reads data from some backend, and stores it in V.
- In this case, we always read null data. You'll want to fill in
- something more interesting. */
-
- memset (value_contents_all_raw (v),
- value_offset (v),
- TYPE_LENGTH (value_type (v)));
-@}
-
-static void
-nil_value_write (struct value *v, struct value *fromval)
-@{
- /* Takes the data from FROMVAL and stores it in the backend of V. */
-
- to_oblivion (value_contents_all_raw (fromval),
- value_offset (v),
- TYPE_LENGTH (value_type (fromval)));
-@}
-
-static struct lval_funcs nil_value_funcs =
- @{
- nil_value_read,
- nil_value_write
- @};
-
-struct value *
-make_nil_value (void)
-@{
- struct type *type;
- struct value *v;
-
- type = make_nils_type ();
- v = allocate_computed_value (type, &nil_value_funcs, NULL);
-
- return v;
-@}
-@end smallexample
-
-See the implementation of the @code{$_siginfo} convenience variable in
-@file{infrun.c} as a real example use of lval_computed.
-
-@end table
-
-@node Stack Frames
-@chapter Stack Frames
-
-@cindex frame
-@cindex call stack frame
-A frame is a construct that @value{GDBN} uses to keep track of calling
-and called functions.
-
-@cindex unwind frame
-@value{GDBN}'s frame model, a fresh design, was implemented with the
-need to support @sc{dwarf}'s Call Frame Information in mind. In fact,
-the term ``unwind'' is taken directly from that specification.
-Developers wishing to learn more about unwinders, are encouraged to
-read the @sc{dwarf} specification, available from
-@url{http://www.dwarfstd.org}.
-
-@findex frame_register_unwind
-@findex get_frame_register
-@value{GDBN}'s model is that you find a frame's registers by
-``unwinding'' them from the next younger frame. That is,
-@samp{get_frame_register} which returns the value of a register in
-frame #1 (the next-to-youngest frame), is implemented by calling frame
-#0's @code{frame_register_unwind} (the youngest frame). But then the
-obvious question is: how do you access the registers of the youngest
-frame itself?
-
-@cindex sentinel frame
-@findex get_frame_type
-@vindex SENTINEL_FRAME
-To answer this question, @value{GDBN} has the @dfn{sentinel} frame, the
-``-1st'' frame. Unwinding registers from the sentinel frame gives you
-the current values of the youngest real frame's registers. If @var{f}
-is a sentinel frame, then @code{get_frame_type (@var{f}) @equiv{}
-SENTINEL_FRAME}.
-
-@section Selecting an Unwinder
-
-@findex frame_unwind_prepend_unwinder
-@findex frame_unwind_append_unwinder
-The architecture registers a list of frame unwinders (@code{struct
-frame_unwind}), using the functions
-@code{frame_unwind_prepend_unwinder} and
-@code{frame_unwind_append_unwinder}. Each unwinder includes a
-sniffer. Whenever @value{GDBN} needs to unwind a frame (to fetch the
-previous frame's registers or the current frame's ID), it calls
-registered sniffers in order to find one which recognizes the frame.
-The first time a sniffer returns non-zero, the corresponding unwinder
-is assigned to the frame.
-
-@section Unwinding the Frame ID
-@cindex frame ID
-
-Every frame has an associated ID, of type @code{struct frame_id}.
-The ID includes the stack base and function start address for
-the frame. The ID persists through the entire life of the frame,
-including while other called frames are running; it is used to
-locate an appropriate @code{struct frame_info} from the cache.
-
-Every time the inferior stops, and at various other times, the frame
-cache is flushed. Because of this, parts of @value{GDBN} which need
-to keep track of individual frames cannot use pointers to @code{struct
-frame_info}. A frame ID provides a stable reference to a frame, even
-when the unwinder must be run again to generate a new @code{struct
-frame_info} for the same frame.
-
-The frame's unwinder's @code{this_id} method is called to find the ID.
-Note that this is different from register unwinding, where the next
-frame's @code{prev_register} is called to unwind this frame's
-registers.
-
-Both stack base and function address are required to identify the
-frame, because a recursive function has the same function address for
-two consecutive frames and a leaf function may have the same stack
-address as its caller. On some platforms, a third address is part of
-the ID to further disambiguate frames---for instance, on IA-64
-the separate register stack address is included in the ID.
-
-An invalid frame ID (@code{outer_frame_id}) returned from the
-@code{this_id} method means to stop unwinding after this frame.
-
-@code{null_frame_id} is another invalid frame ID which should be used
-when there is no frame. For instance, certain breakpoints are attached
-to a specific frame, and that frame is identified through its frame ID
-(we use this to implement the "finish" command). Using
-@code{null_frame_id} as the frame ID for a given breakpoint means
-that the breakpoint is not specific to any frame. The @code{this_id}
-method should never return @code{null_frame_id}.
-
-@section Unwinding Registers
-
-Each unwinder includes a @code{prev_register} method. This method
-takes a frame, an associated cache pointer, and a register number.
-It returns a @code{struct value *} describing the requested register,
-as saved by this frame. This is the value of the register that is
-current in this frame's caller.
-
-The returned value must have the same type as the register. It may
-have any lvalue type. In most circumstances one of these routines
-will generate the appropriate value:
-
-@table @code
-@item frame_unwind_got_optimized
-@findex frame_unwind_got_optimized
-This register was not saved.
-
-@item frame_unwind_got_register
-@findex frame_unwind_got_register
-This register was copied into another register in this frame. This
-is also used for unchanged registers; they are ``copied'' into the
-same register.
-
-@item frame_unwind_got_memory
-@findex frame_unwind_got_memory
-This register was saved in memory.
-
-@item frame_unwind_got_constant
-@findex frame_unwind_got_constant
-This register was not saved, but the unwinder can compute the previous
-value some other way.
-
-@item frame_unwind_got_address
-@findex frame_unwind_got_address
-Same as @code{frame_unwind_got_constant}, except that the value is a target
-address. This is frequently used for the stack pointer, which is not
-explicitly saved but has a known offset from this frame's stack
-pointer. For architectures with a flat unified address space, this is
-generally the same as @code{frame_unwind_got_constant}.
-@end table
-
-@node Symbol Handling
-
-@chapter Symbol Handling
-
-Symbols are a key part of @value{GDBN}'s operation. Symbols include
-variables, functions, and types.
-
-Symbol information for a large program can be truly massive, and
-reading of symbol information is one of the major performance
-bottlenecks in @value{GDBN}; it can take many minutes to process it
-all. Studies have shown that nearly all the time spent is
-computational, rather than file reading.
-
-One of the ways for @value{GDBN} to provide a good user experience is
-to start up quickly, taking no more than a few seconds. It is simply
-not possible to process all of a program's debugging info in that
-time, and so we attempt to handle symbols incrementally. For instance,
-we create @dfn{partial symbol tables} consisting of only selected
-symbols, and only expand them to full symbol tables when necessary.
-
-@section Symbol Reading
-
-@cindex symbol reading
-@cindex reading of symbols
-@cindex symbol files
-@value{GDBN} reads symbols from @dfn{symbol files}. The usual symbol
-file is the file containing the program which @value{GDBN} is
-debugging. @value{GDBN} can be directed to use a different file for
-symbols (with the @samp{symbol-file} command), and it can also read
-more symbols via the @samp{add-file} and @samp{load} commands. In
-addition, it may bring in more symbols while loading shared
-libraries.
-
-@findex find_sym_fns
-Symbol files are initially opened by code in @file{symfile.c} using
-the BFD library (@pxref{Support Libraries}). BFD identifies the type
-of the file by examining its header. @code{find_sym_fns} then uses
-this identification to locate a set of symbol-reading functions.
-
-@findex add_symtab_fns
-@cindex @code{sym_fns} structure
-@cindex adding a symbol-reading module
-Symbol-reading modules identify themselves to @value{GDBN} by calling
-@code{add_symtab_fns} during their module initialization. The argument
-to @code{add_symtab_fns} is a @code{struct sym_fns} which contains the
-name (or name prefix) of the symbol format, the length of the prefix,
-and pointers to four functions. These functions are called at various
-times to process symbol files whose identification matches the specified
-prefix.
-
-The functions supplied by each module are:
-
-@table @code
-@item @var{xyz}_symfile_init(struct sym_fns *sf)
-
-@cindex secondary symbol file
-Called from @code{symbol_file_add} when we are about to read a new
-symbol file. This function should clean up any internal state (possibly
-resulting from half-read previous files, for example) and prepare to
-read a new symbol file. Note that the symbol file which we are reading
-might be a new ``main'' symbol file, or might be a secondary symbol file
-whose symbols are being added to the existing symbol table.
-
-The argument to @code{@var{xyz}_symfile_init} is a newly allocated
-@code{struct sym_fns} whose @code{bfd} field contains the BFD for the
-new symbol file being read. Its @code{private} field has been zeroed,
-and can be modified as desired. Typically, a struct of private
-information will be @code{malloc}'d, and a pointer to it will be placed
-in the @code{private} field.
-
-There is no result from @code{@var{xyz}_symfile_init}, but it can call
-@code{error} if it detects an unavoidable problem.
-
-@item @var{xyz}_new_init()
-
-Called from @code{symbol_file_add} when discarding existing symbols.
-This function needs only handle the symbol-reading module's internal
-state; the symbol table data structures visible to the rest of
-@value{GDBN} will be discarded by @code{symbol_file_add}. It has no
-arguments and no result. It may be called after
-@code{@var{xyz}_symfile_init}, if a new symbol table is being read, or
-may be called alone if all symbols are simply being discarded.
-
-@item @var{xyz}_symfile_read(struct sym_fns *sf, CORE_ADDR addr, int mainline)
-
-Called from @code{symbol_file_add} to actually read the symbols from a
-symbol-file into a set of psymtabs or symtabs.
-
-@code{sf} points to the @code{struct sym_fns} originally passed to
-@code{@var{xyz}_sym_init} for possible initialization. @code{addr} is
-the offset between the file's specified start address and its true
-address in memory. @code{mainline} is 1 if this is the main symbol
-table being read, and 0 if a secondary symbol file (e.g., shared library
-or dynamically loaded file) is being read.@refill
-@end table
-
-In addition, if a symbol-reading module creates psymtabs when
-@var{xyz}_symfile_read is called, these psymtabs will contain a pointer
-to a function @code{@var{xyz}_psymtab_to_symtab}, which can be called
-from any point in the @value{GDBN} symbol-handling code.
-
-@table @code
-@item @var{xyz}_psymtab_to_symtab (struct partial_symtab *pst)
-
-Called from @code{psymtab_to_symtab} (or the @code{PSYMTAB_TO_SYMTAB} macro) if
-the psymtab has not already been read in and had its @code{pst->symtab}
-pointer set. The argument is the psymtab to be fleshed-out into a
-symtab. Upon return, @code{pst->readin} should have been set to 1, and
-@code{pst->symtab} should contain a pointer to the new corresponding symtab, or
-zero if there were no symbols in that part of the symbol file.
-@end table
-
-@section Partial Symbol Tables
-
-@value{GDBN} has three types of symbol tables:
-
-@itemize @bullet
-@cindex full symbol table
-@cindex symtabs
-@item
-Full symbol tables (@dfn{symtabs}). These contain the main
-information about symbols and addresses.
-
-@cindex psymtabs
-@item
-Partial symbol tables (@dfn{psymtabs}). These contain enough
-information to know when to read the corresponding part of the full
-symbol table.
-
-@cindex minimal symbol table
-@cindex minsymtabs
-@item
-Minimal symbol tables (@dfn{msymtabs}). These contain information
-gleaned from non-debugging symbols.
-@end itemize
-
-@cindex partial symbol table
-This section describes partial symbol tables.
-
-A psymtab is constructed by doing a very quick pass over an executable
-file's debugging information. Small amounts of information are
-extracted---enough to identify which parts of the symbol table will
-need to be re-read and fully digested later, when the user needs the
-information. The speed of this pass causes @value{GDBN} to start up very
-quickly. Later, as the detailed rereading occurs, it occurs in small
-pieces, at various times, and the delay therefrom is mostly invisible to
-the user.
-@c (@xref{Symbol Reading}.)
-
-The symbols that show up in a file's psymtab should be, roughly, those
-visible to the debugger's user when the program is not running code from
-that file. These include external symbols and types, static symbols and
-types, and @code{enum} values declared at file scope.
-
-The psymtab also contains the range of instruction addresses that the
-full symbol table would represent.
-
-@cindex finding a symbol
-@cindex symbol lookup
-The idea is that there are only two ways for the user (or much of the
-code in the debugger) to reference a symbol:
-
-@itemize @bullet
-@findex find_pc_function
-@findex find_pc_line
-@item
-By its address (e.g., execution stops at some address which is inside a
-function in this file). The address will be noticed to be in the
-range of this psymtab, and the full symtab will be read in.
-@code{find_pc_function}, @code{find_pc_line}, and other
-@code{find_pc_@dots{}} functions handle this.
-
-@cindex lookup_symbol
-@item
-By its name
-(e.g., the user asks to print a variable, or set a breakpoint on a
-function). Global names and file-scope names will be found in the
-psymtab, which will cause the symtab to be pulled in. Local names will
-have to be qualified by a global name, or a file-scope name, in which
-case we will have already read in the symtab as we evaluated the
-qualifier. Or, a local symbol can be referenced when we are ``in'' a
-local scope, in which case the first case applies. @code{lookup_symbol}
-does most of the work here.
-@end itemize
-
-The only reason that psymtabs exist is to cause a symtab to be read in
-at the right moment. Any symbol that can be elided from a psymtab,
-while still causing that to happen, should not appear in it. Since
-psymtabs don't have the idea of scope, you can't put local symbols in
-them anyway. Psymtabs don't have the idea of the type of a symbol,
-either, so types need not appear, unless they will be referenced by
-name.
-
-It is a bug for @value{GDBN} to behave one way when only a psymtab has
-been read, and another way if the corresponding symtab has been read
-in. Such bugs are typically caused by a psymtab that does not contain
-all the visible symbols, or which has the wrong instruction address
-ranges.
-
-The psymtab for a particular section of a symbol file (objfile) could be
-thrown away after the symtab has been read in. The symtab should always
-be searched before the psymtab, so the psymtab will never be used (in a
-bug-free environment). Currently, psymtabs are allocated on an obstack,
-and all the psymbols themselves are allocated in a pair of large arrays
-on an obstack, so there is little to be gained by trying to free them
-unless you want to do a lot more work.
-
-Whether or not psymtabs are created depends on the objfile's symbol
-reader. The core of @value{GDBN} hides the details of partial symbols
-and partial symbol tables behind a set of function pointers known as
-the @dfn{quick symbol functions}. These are documented in
-@file{symfile.h}.
-
-@section Types
-
-@unnumberedsubsec Fundamental Types (e.g., @code{FT_VOID}, @code{FT_BOOLEAN}).
-
-@cindex fundamental types
-These are the fundamental types that @value{GDBN} uses internally. Fundamental
-types from the various debugging formats (stabs, ELF, etc) are mapped
-into one of these. They are basically a union of all fundamental types
-that @value{GDBN} knows about for all the languages that @value{GDBN}
-knows about.
-
-@unnumberedsubsec Type Codes (e.g., @code{TYPE_CODE_PTR}, @code{TYPE_CODE_ARRAY}).
-
-@cindex type codes
-Each time @value{GDBN} builds an internal type, it marks it with one
-of these types. The type may be a fundamental type, such as
-@code{TYPE_CODE_INT}, or a derived type, such as @code{TYPE_CODE_PTR}
-which is a pointer to another type. Typically, several @code{FT_*}
-types map to one @code{TYPE_CODE_*} type, and are distinguished by
-other members of the type struct, such as whether the type is signed
-or unsigned, and how many bits it uses.
-
-@unnumberedsubsec Builtin Types (e.g., @code{builtin_type_void}, @code{builtin_type_char}).
-
-These are instances of type structs that roughly correspond to
-fundamental types and are created as global types for @value{GDBN} to
-use for various ugly historical reasons. We eventually want to
-eliminate these. Note for example that @code{builtin_type_int}
-initialized in @file{gdbtypes.c} is basically the same as a
-@code{TYPE_CODE_INT} type that is initialized in @file{c-lang.c} for
-an @code{FT_INTEGER} fundamental type. The difference is that the
-@code{builtin_type} is not associated with any particular objfile, and
-only one instance exists, while @file{c-lang.c} builds as many
-@code{TYPE_CODE_INT} types as needed, with each one associated with
-some particular objfile.
-
-@section Object File Formats
-@cindex object file formats
-
-@subsection a.out
-
-@cindex @code{a.out} format
-The @code{a.out} format is the original file format for Unix. It
-consists of three sections: @code{text}, @code{data}, and @code{bss},
-which are for program code, initialized data, and uninitialized data,
-respectively.
-
-The @code{a.out} format is so simple that it doesn't have any reserved
-place for debugging information. (Hey, the original Unix hackers used
-@samp{adb}, which is a machine-language debugger!) The only debugging
-format for @code{a.out} is stabs, which is encoded as a set of normal
-symbols with distinctive attributes.
-
-The basic @code{a.out} reader is in @file{dbxread.c}.
-
-@subsection COFF
-
-@cindex COFF format
-The COFF format was introduced with System V Release 3 (SVR3) Unix.
-COFF files may have multiple sections, each prefixed by a header. The
-number of sections is limited.
-
-The COFF specification includes support for debugging. Although this
-was a step forward, the debugging information was woefully limited.
-For instance, it was not possible to represent code that came from an
-included file. GNU's COFF-using configs often use stabs-type info,
-encapsulated in special sections.
-
-The COFF reader is in @file{coffread.c}.
-
-@subsection ECOFF
-
-@cindex ECOFF format
-ECOFF is an extended COFF originally introduced for Mips and Alpha
-workstations.
-
-The basic ECOFF reader is in @file{mipsread.c}.
-
-@subsection XCOFF
-
-@cindex XCOFF format
-The IBM RS/6000 running AIX uses an object file format called XCOFF.
-The COFF sections, symbols, and line numbers are used, but debugging
-symbols are @code{dbx}-style stabs whose strings are located in the
-@code{.debug} section (rather than the string table). For more
-information, see @ref{Top,,,stabs,The Stabs Debugging Format}.
-
-The shared library scheme has a clean interface for figuring out what
-shared libraries are in use, but the catch is that everything which
-refers to addresses (symbol tables and breakpoints at least) needs to be
-relocated for both shared libraries and the main executable. At least
-using the standard mechanism this can only be done once the program has
-been run (or the core file has been read).
-
-@subsection PE
-
-@cindex PE-COFF format
-Windows 95 and NT use the PE (@dfn{Portable Executable}) format for their
-executables. PE is basically COFF with additional headers.
-
-While BFD includes special PE support, @value{GDBN} needs only the basic
-COFF reader.
-
-@subsection ELF
-
-@cindex ELF format
-The ELF format came with System V Release 4 (SVR4) Unix. ELF is
-similar to COFF in being organized into a number of sections, but it
-removes many of COFF's limitations. Debugging info may be either stabs
-encapsulated in ELF sections, or more commonly these days, DWARF.
-
-The basic ELF reader is in @file{elfread.c}.
-
-@subsection SOM
-
-@cindex SOM format
-SOM is HP's object file and debug format (not to be confused with IBM's
-SOM, which is a cross-language ABI).
-
-The SOM reader is in @file{somread.c}.
-
-@section Debugging File Formats
-
-This section describes characteristics of debugging information that
-are independent of the object file format.
-
-@subsection stabs
-
-@cindex stabs debugging info
-@code{stabs} started out as special symbols within the @code{a.out}
-format. Since then, it has been encapsulated into other file
-formats, such as COFF and ELF.
-
-While @file{dbxread.c} does some of the basic stab processing,
-including for encapsulated versions, @file{stabsread.c} does
-the real work.
-
-@subsection COFF
-
-@cindex COFF debugging info
-The basic COFF definition includes debugging information. The level
-of support is minimal and non-extensible, and is not often used.
-
-@subsection Mips debug (Third Eye)
-
-@cindex ECOFF debugging info
-ECOFF includes a definition of a special debug format.
-
-The file @file{mdebugread.c} implements reading for this format.
-
-@c mention DWARF 1 as a formerly-supported format
-
-@subsection DWARF 2
-
-@cindex DWARF 2 debugging info
-DWARF 2 is an improved but incompatible version of DWARF 1.
-
-The DWARF 2 reader is in @file{dwarf2read.c}.
-
-@subsection Compressed DWARF 2
-
-@cindex Compressed DWARF 2 debugging info
-Compressed DWARF 2 is not technically a separate debugging format, but
-merely DWARF 2 debug information that has been compressed. In this
-format, every object-file section holding DWARF 2 debugging
-information is compressed and prepended with a header. (The section
-is also typically renamed, so a section called @code{.debug_info} in a
-DWARF 2 binary would be called @code{.zdebug_info} in a compressed
-DWARF 2 binary.) The header is 12 bytes long:
-
-@itemize @bullet
-@item
-4 bytes: the literal string ``ZLIB''
-@item
-8 bytes: the uncompressed size of the section, in big-endian byte
-order.
-@end itemize
-
-The same reader is used for both compressed an normal DWARF 2 info.
-Section decompression is done in @code{zlib_decompress_section} in
-@file{dwarf2read.c}.
-
-@subsection DWARF 3
-
-@cindex DWARF 3 debugging info
-DWARF 3 is an improved version of DWARF 2.
-
-@subsection SOM
-
-@cindex SOM debugging info
-Like COFF, the SOM definition includes debugging information.
-
-@section Adding a New Symbol Reader to @value{GDBN}
-
-@cindex adding debugging info reader
-If you are using an existing object file format (@code{a.out}, COFF, ELF, etc),
-there is probably little to be done.
-
-If you need to add a new object file format, you must first add it to
-BFD. This is beyond the scope of this document.
-
-You must then arrange for the BFD code to provide access to the
-debugging symbols. Generally @value{GDBN} will have to call swapping
-routines from BFD and a few other BFD internal routines to locate the
-debugging information. As much as possible, @value{GDBN} should not
-depend on the BFD internal data structures.
-
-For some targets (e.g., COFF), there is a special transfer vector used
-to call swapping routines, since the external data structures on various
-platforms have different sizes and layouts. Specialized routines that
-will only ever be implemented by one object file format may be called
-directly. This interface should be described in a file
-@file{bfd/lib@var{xyz}.h}, which is included by @value{GDBN}.
-
-@section Memory Management for Symbol Files
-
-Most memory associated with a loaded symbol file is stored on
-its @code{objfile_obstack}. This includes symbols, types,
-namespace data, and other information produced by the symbol readers.
-
-Because this data lives on the objfile's obstack, it is automatically
-released when the objfile is unloaded or reloaded. Therefore one
-objfile must not reference symbol or type data from another objfile;
-they could be unloaded at different times.
-
-User convenience variables, et cetera, have associated types. Normally
-these types live in the associated objfile. However, when the objfile
-is unloaded, those types are deep copied to global memory, so that
-the values of the user variables and history items are not lost.
-
-
-@node Language Support
-
-@chapter Language Support
-
-@cindex language support
-@value{GDBN}'s language support is mainly driven by the symbol reader,
-although it is possible for the user to set the source language
-manually.
-
-@value{GDBN} chooses the source language by looking at the extension
-of the file recorded in the debug info; @file{.c} means C, @file{.f}
-means Fortran, etc. It may also use a special-purpose language
-identifier if the debug format supports it, like with DWARF.
-
-@section Adding a Source Language to @value{GDBN}
-
-@cindex adding source language
-To add other languages to @value{GDBN}'s expression parser, follow the
-following steps:
-
-@table @emph
-@item Create the expression parser.
-
-@cindex expression parser
-This should reside in a file @file{@var{lang}-exp.y}. Routines for
-building parsed expressions into a @code{union exp_element} list are in
-@file{parse.c}.
-
-@cindex language parser
-Since we can't depend upon everyone having Bison, and YACC produces
-parsers that define a bunch of global names, the following lines
-@strong{must} be included at the top of the YACC parser, to prevent the
-various parsers from defining the same global names:
-
-@smallexample
-#define yyparse @var{lang}_parse
-#define yylex @var{lang}_lex
-#define yyerror @var{lang}_error
-#define yylval @var{lang}_lval
-#define yychar @var{lang}_char
-#define yydebug @var{lang}_debug
-#define yypact @var{lang}_pact
-#define yyr1 @var{lang}_r1
-#define yyr2 @var{lang}_r2
-#define yydef @var{lang}_def
-#define yychk @var{lang}_chk
-#define yypgo @var{lang}_pgo
-#define yyact @var{lang}_act
-#define yyexca @var{lang}_exca
-#define yyerrflag @var{lang}_errflag
-#define yynerrs @var{lang}_nerrs
-@end smallexample
-
-At the bottom of your parser, define a @code{struct language_defn} and
-initialize it with the right values for your language. Define an
-@code{initialize_@var{lang}} routine and have it call
-@samp{add_language(@var{lang}_language_defn)} to tell the rest of @value{GDBN}
-that your language exists. You'll need some other supporting variables
-and functions, which will be used via pointers from your
-@code{@var{lang}_language_defn}. See the declaration of @code{struct
-language_defn} in @file{language.h}, and the other @file{*-exp.y} files,
-for more information.
-
-@item Add any evaluation routines, if necessary
-
-@cindex expression evaluation routines
-@findex evaluate_subexp
-@findex prefixify_subexp
-@findex length_of_subexp
-If you need new opcodes (that represent the operations of the language),
-add them to the enumerated type in @file{expression.h}. Add support
-code for these operations in the @code{evaluate_subexp} function
-defined in the file @file{eval.c}. Add cases
-for new opcodes in two functions from @file{parse.c}:
-@code{prefixify_subexp} and @code{length_of_subexp}. These compute
-the number of @code{exp_element}s that a given operation takes up.
-
-@item Update some existing code
-
-Add an enumerated identifier for your language to the enumerated type
-@code{enum language} in @file{defs.h}.
-
-Update the routines in @file{language.c} so your language is included.
-These routines include type predicates and such, which (in some cases)
-are language dependent. If your language does not appear in the switch
-statement, an error is reported.
-
-@vindex current_language
-Also included in @file{language.c} is the code that updates the variable
-@code{current_language}, and the routines that translate the
-@code{language_@var{lang}} enumerated identifier into a printable
-string.
-
-@findex _initialize_language
-Update the function @code{_initialize_language} to include your
-language. This function picks the default language upon startup, so is
-dependent upon which languages that @value{GDBN} is built for.
-
-@findex allocate_symtab
-Update @code{allocate_symtab} in @file{symfile.c} and/or symbol-reading
-code so that the language of each symtab (source file) is set properly.
-This is used to determine the language to use at each stack frame level.
-Currently, the language is set based upon the extension of the source
-file. If the language can be better inferred from the symbol
-information, please set the language of the symtab in the symbol-reading
-code.
-
-@findex print_subexp
-@findex op_print_tab
-Add helper code to @code{print_subexp} (in @file{expprint.c}) to handle any new
-expression opcodes you have added to @file{expression.h}. Also, add the
-printed representations of your operators to @code{op_print_tab}.
-
-@item Add a place of call
-
-@findex parse_exp_1
-Add a call to @code{@var{lang}_parse()} and @code{@var{lang}_error} in
-@code{parse_exp_1} (defined in @file{parse.c}).
-
-@item Edit @file{Makefile.in}
-
-Add dependencies in @file{Makefile.in}. Make sure you update the macro
-variables such as @code{HFILES} and @code{OBJS}, otherwise your code may
-not get linked in, or, worse yet, it may not get @code{tar}red into the
-distribution!
-@end table
-
-
-@node Host Definition
-
-@chapter Host Definition
-
-With the advent of Autoconf, it's rarely necessary to have host
-definition machinery anymore. The following information is provided,
-mainly, as an historical reference.
-
-@section Adding a New Host
-
-@cindex adding a new host
-@cindex host, adding
-@value{GDBN}'s host configuration support normally happens via Autoconf.
-New host-specific definitions should not be needed. Older hosts
-@value{GDBN} still use the host-specific definitions and files listed
-below, but these mostly exist for historical reasons, and will
-eventually disappear.
-
-@table @file
-@item gdb/config/@var{arch}/@var{xyz}.mh
-This file is a Makefile fragment that once contained both host and
-native configuration information (@pxref{Native Debugging}) for the
-machine @var{xyz}. The host configuration information is now handled
-by Autoconf.
-
-Host configuration information included definitions for @code{CC},
-@code{SYSV_DEFINE}, @code{XM_CFLAGS}, @code{XM_ADD_FILES},
-@code{XM_CLIBS}, @code{XM_CDEPS}, etc.; see @file{Makefile.in}.
-
-New host-only configurations do not need this file.
-
-@end table
-
-(Files named @file{gdb/config/@var{arch}/xm-@var{xyz}.h} were once
-used to define host-specific macros, but were no longer needed and
-have all been removed.)
-
-@subheading Generic Host Support Files
-
-@cindex generic host support
-There are some ``generic'' versions of routines that can be used by
-various systems.
-
-@table @file
-@cindex remote debugging support
-@cindex serial line support
-@item ser-unix.c
-This contains serial line support for Unix systems. It is included by
-default on all Unix-like hosts.
-
-@item ser-pipe.c
-This contains serial pipe support for Unix systems. It is included by
-default on all Unix-like hosts.
-
-@item ser-mingw.c
-This contains serial line support for 32-bit programs running under
-Windows using MinGW.
-
-@item ser-go32.c
-This contains serial line support for 32-bit programs running under DOS,
-using the DJGPP (a.k.a.@: GO32) execution environment.
-
-@cindex TCP remote support
-@item ser-tcp.c
-This contains generic TCP support using sockets. It is included by
-default on all Unix-like hosts and with MinGW.
-@end table
-
-@section Host Conditionals
-
-When @value{GDBN} is configured and compiled, various macros are
-defined or left undefined, to control compilation based on the
-attributes of the host system. While formerly they could be set in
-host-specific header files, at present they can be changed only by
-setting @code{CFLAGS} when building, or by editing the source code.
-
-These macros and their meanings (or if the meaning is not documented
-here, then one of the source files where they are used is indicated)
-are:
-
-@ftable @code
-@item @value{GDBN}INIT_FILENAME
-The default name of @value{GDBN}'s initialization file (normally
-@file{.gdbinit}).
-
-@item CRLF_SOURCE_FILES
-@cindex DOS text files
-Define this if host files use @code{\r\n} rather than @code{\n} as a
-line terminator. This will cause source file listings to omit @code{\r}
-characters when printing and it will allow @code{\r\n} line endings of files
-which are ``sourced'' by gdb. It must be possible to open files in binary
-mode using @code{O_BINARY} or, for fopen, @code{"rb"}.
-
-@item DEFAULT_PROMPT
-@cindex prompt
-The default value of the prompt string (normally @code{"(gdb) "}).
-
-@item DEV_TTY
-@cindex terminal device
-The name of the generic TTY device, defaults to @code{"/dev/tty"}.
-
-@item ISATTY
-Substitute for isatty, if not available.
-
-@item FOPEN_RB
-Define this if binary files are opened the same way as text files.
-
-@item PRINTF_HAS_LONG_LONG
-Define this if the host can handle printing of long long integers via
-the printf format conversion specifier @code{ll}. This is set by the
-@code{configure} script.
-
-@item LSEEK_NOT_LINEAR
-Define this if @code{lseek (n)} does not necessarily move to byte number
-@code{n} in the file. This is only used when reading source files. It
-is normally faster to define @code{CRLF_SOURCE_FILES} when possible.
-
-@item lint
-Define this to help placate @code{lint} in some situations.
-
-@item volatile
-Define this to override the defaults of @code{__volatile__} or
-@code{/**/}.
-@end ftable
-
-
-@node Target Architecture Definition
-
-@chapter Target Architecture Definition
-
-@cindex target architecture definition
-@value{GDBN}'s target architecture defines what sort of
-machine-language programs @value{GDBN} can work with, and how it works
-with them.
-
-The target architecture object is implemented as the C structure
-@code{struct gdbarch *}. The structure, and its methods, are generated
-using the Bourne shell script @file{gdbarch.sh}.
-
-@menu
-* OS ABI Variant Handling::
-* Initialize New Architecture::
-* Registers and Memory::
-* Pointers and Addresses::
-* Address Classes::
-* Register Representation::
-* Frame Interpretation::
-* Inferior Call Setup::
-* Adding support for debugging core files::
-* Defining Other Architecture Features::
-* Adding a New Target::
-@end menu
-
-@node OS ABI Variant Handling
-@section Operating System ABI Variant Handling
-@cindex OS ABI variants
-
-@value{GDBN} provides a mechanism for handling variations in OS
-ABIs. An OS ABI variant may have influence over any number of
-variables in the target architecture definition. There are two major
-components in the OS ABI mechanism: sniffers and handlers.
-
-A @dfn{sniffer} examines a file matching a BFD architecture/flavour pair
-(the architecture may be wildcarded) in an attempt to determine the
-OS ABI of that file. Sniffers with a wildcarded architecture are considered
-to be @dfn{generic}, while sniffers for a specific architecture are
-considered to be @dfn{specific}. A match from a specific sniffer
-overrides a match from a generic sniffer. Multiple sniffers for an
-architecture/flavour may exist, in order to differentiate between two
-different operating systems which use the same basic file format. The
-OS ABI framework provides a generic sniffer for ELF-format files which
-examines the @code{EI_OSABI} field of the ELF header, as well as note
-sections known to be used by several operating systems.
-
-@cindex fine-tuning @code{gdbarch} structure
-A @dfn{handler} is used to fine-tune the @code{gdbarch} structure for the
-selected OS ABI. There may be only one handler for a given OS ABI
-for each BFD architecture.
-
-The following OS ABI variants are defined in @file{defs.h}:
-
-@table @code
-
-@findex GDB_OSABI_UNINITIALIZED
-@item GDB_OSABI_UNINITIALIZED
-Used for struct gdbarch_info if ABI is still uninitialized.
-
-@findex GDB_OSABI_UNKNOWN
-@item GDB_OSABI_UNKNOWN
-The ABI of the inferior is unknown. The default @code{gdbarch}
-settings for the architecture will be used.
-
-@findex GDB_OSABI_SVR4
-@item GDB_OSABI_SVR4
-UNIX System V Release 4.
-
-@findex GDB_OSABI_HURD
-@item GDB_OSABI_HURD
-GNU using the Hurd kernel.
-
-@findex GDB_OSABI_SOLARIS
-@item GDB_OSABI_SOLARIS
-Sun Solaris.
-
-@findex GDB_OSABI_OSF1
-@item GDB_OSABI_OSF1
-OSF/1, including Digital UNIX and Compaq Tru64 UNIX.
-
-@findex GDB_OSABI_LINUX
-@item GDB_OSABI_LINUX
-GNU using the Linux kernel.
-
-@findex GDB_OSABI_FREEBSD_AOUT
-@item GDB_OSABI_FREEBSD_AOUT
-FreeBSD using the @code{a.out} executable format.
-
-@findex GDB_OSABI_FREEBSD_ELF
-@item GDB_OSABI_FREEBSD_ELF
-FreeBSD using the ELF executable format.
-
-@findex GDB_OSABI_NETBSD_AOUT
-@item GDB_OSABI_NETBSD_AOUT
-NetBSD using the @code{a.out} executable format.
-
-@findex GDB_OSABI_NETBSD_ELF
-@item GDB_OSABI_NETBSD_ELF
-NetBSD using the ELF executable format.
-
-@findex GDB_OSABI_OPENBSD_ELF
-@item GDB_OSABI_OPENBSD_ELF
-OpenBSD using the ELF executable format.
-
-@findex GDB_OSABI_WINCE
-@item GDB_OSABI_WINCE
-Windows CE.
-
-@findex GDB_OSABI_GO32
-@item GDB_OSABI_GO32
-DJGPP.
-
-@findex GDB_OSABI_IRIX
-@item GDB_OSABI_IRIX
-Irix.
-
-@findex GDB_OSABI_INTERIX
-@item GDB_OSABI_INTERIX
-Interix (Posix layer for MS-Windows systems).
-
-@findex GDB_OSABI_HPUX_ELF
-@item GDB_OSABI_HPUX_ELF
-HP/UX using the ELF executable format.
-
-@findex GDB_OSABI_HPUX_SOM
-@item GDB_OSABI_HPUX_SOM
-HP/UX using the SOM executable format.
-
-@findex GDB_OSABI_QNXNTO
-@item GDB_OSABI_QNXNTO
-QNX Neutrino.
-
-@findex GDB_OSABI_CYGWIN
-@item GDB_OSABI_CYGWIN
-Cygwin.
-
-@findex GDB_OSABI_AIX
-@item GDB_OSABI_AIX
-AIX.
-
-@end table
-
-Here are the functions that make up the OS ABI framework:
-
-@deftypefun {const char *} gdbarch_osabi_name (enum gdb_osabi @var{osabi})
-Return the name of the OS ABI corresponding to @var{osabi}.
-@end deftypefun
-
-@deftypefun void gdbarch_register_osabi (enum bfd_architecture @var{arch}, unsigned long @var{machine}, enum gdb_osabi @var{osabi}, void (*@var{init_osabi})(struct gdbarch_info @var{info}, struct gdbarch *@var{gdbarch}))
-Register the OS ABI handler specified by @var{init_osabi} for the
-architecture, machine type and OS ABI specified by @var{arch},
-@var{machine} and @var{osabi}. In most cases, a value of zero for the
-machine type, which implies the architecture's default machine type,
-will suffice.
-@end deftypefun
-
-@deftypefun void gdbarch_register_osabi_sniffer (enum bfd_architecture @var{arch}, enum bfd_flavour @var{flavour}, enum gdb_osabi (*@var{sniffer})(bfd *@var{abfd}))
-Register the OS ABI file sniffer specified by @var{sniffer} for the
-BFD architecture/flavour pair specified by @var{arch} and @var{flavour}.
-If @var{arch} is @code{bfd_arch_unknown}, the sniffer is considered to
-be generic, and is allowed to examine @var{flavour}-flavoured files for
-any architecture.
-@end deftypefun
-
-@deftypefun {enum gdb_osabi} gdbarch_lookup_osabi (bfd *@var{abfd})
-Examine the file described by @var{abfd} to determine its OS ABI.
-The value @code{GDB_OSABI_UNKNOWN} is returned if the OS ABI cannot
-be determined.
-@end deftypefun
-
-@deftypefun void gdbarch_init_osabi (struct gdbarch info @var{info}, struct gdbarch *@var{gdbarch}, enum gdb_osabi @var{osabi})
-Invoke the OS ABI handler corresponding to @var{osabi} to fine-tune the
-@code{gdbarch} structure specified by @var{gdbarch}. If a handler
-corresponding to @var{osabi} has not been registered for @var{gdbarch}'s
-architecture, a warning will be issued and the debugging session will continue
-with the defaults already established for @var{gdbarch}.
-@end deftypefun
-
-@deftypefun void generic_elf_osabi_sniff_abi_tag_sections (bfd *@var{abfd}, asection *@var{sect}, void *@var{obj})
-Helper routine for ELF file sniffers. Examine the file described by
-@var{abfd} and look at ABI tag note sections to determine the OS ABI
-from the note. This function should be called via
-@code{bfd_map_over_sections}.
-@end deftypefun
-
-@node Initialize New Architecture
-@section Initializing a New Architecture
-
-@menu
-* How an Architecture is Represented::
-* Looking Up an Existing Architecture::
-* Creating a New Architecture::
-@end menu
-
-@node How an Architecture is Represented
-@subsection How an Architecture is Represented
-@cindex architecture representation
-@cindex representation of architecture
-
-Each @code{gdbarch} is associated with a single @sc{bfd} architecture,
-via a @code{bfd_arch_@var{arch}} in the @code{bfd_architecture}
-enumeration. The @code{gdbarch} is registered by a call to
-@code{register_gdbarch_init}, usually from the file's
-@code{_initialize_@var{filename}} routine, which will be automatically
-called during @value{GDBN} startup. The arguments are a @sc{bfd}
-architecture constant and an initialization function.
-
-@findex _initialize_@var{arch}_tdep
-@cindex @file{@var{arch}-tdep.c}
-A @value{GDBN} description for a new architecture, @var{arch} is created by
-defining a global function @code{_initialize_@var{arch}_tdep}, by
-convention in the source file @file{@var{arch}-tdep.c}. For example,
-in the case of the OpenRISC 1000, this function is called
-@code{_initialize_or1k_tdep} and is found in the file
-@file{or1k-tdep.c}.
-
-@cindex @file{configure.tgt}
-@cindex @code{gdbarch}
-@findex gdbarch_register
-The resulting object files containing the implementation of the
-@code{_initialize_@var{arch}_tdep} function are specified in the @value{GDBN}
-@file{configure.tgt} file, which includes a large case statement
-pattern matching against the @code{--target} option of the
-@code{configure} script. The new @code{struct gdbarch} is created
-within the @code{_initialize_@var{arch}_tdep} function by calling
-@code{gdbarch_register}:
-
-@smallexample
-void gdbarch_register (enum bfd_architecture @var{architecture},
- gdbarch_init_ftype *@var{init_func},
- gdbarch_dump_tdep_ftype *@var{tdep_dump_func});
-@end smallexample
-
-The @var{architecture} will identify the unique @sc{bfd} to be
-associated with this @code{gdbarch}. The @var{init_func} funciton is
-called to create and return the new @code{struct gdbarch}. The
-@var{tdep_dump_func} function will dump the target specific details
-associated with this architecture.
-
-For example the function @code{_initialize_or1k_tdep} creates its
-architecture for 32-bit OpenRISC 1000 architectures by calling:
-
-@smallexample
-gdbarch_register (bfd_arch_or32, or1k_gdbarch_init, or1k_dump_tdep);
-@end smallexample
-
-@node Looking Up an Existing Architecture
-@subsection Looking Up an Existing Architecture
-@cindex @code{gdbarch} lookup
-
-The initialization function has this prototype:
-
-@smallexample
-static struct gdbarch *
-@var{arch}_gdbarch_init (struct gdbarch_info @var{info},
- struct gdbarch_list *@var{arches})
-@end smallexample
-
-The @var{info} argument contains parameters used to select the correct
-architecture, and @var{arches} is a list of architectures which
-have already been created with the same @code{bfd_arch_@var{arch}}
-value.
-
-The initialization function should first make sure that @var{info}
-is acceptable, and return @code{NULL} if it is not. Then, it should
-search through @var{arches} for an exact match to @var{info}, and
-return one if found. Lastly, if no exact match was found, it should
-create a new architecture based on @var{info} and return it.
-
-@findex gdbarch_list_lookup_by_info
-@cindex @code{gdbarch_info}
-The lookup is done using @code{gdbarch_list_lookup_by_info}. It is
-passed the list of existing architectures, @var{arches}, and the
-@code{struct gdbarch_info}, @var{info}, and returns the first matching
-architecture it finds, or @code{NULL} if none are found. If an
-architecture is found it can be returned as the result from the
-initialization function, otherwise a new @code{struct gdbach} will need
-to be created.
-
-The struct gdbarch_info has the following components:
-
-@smallexample
-struct gdbarch_info
-@{
- const struct bfd_arch_info *bfd_arch_info;
- int byte_order;
- bfd *abfd;
- struct gdbarch_tdep_info *tdep_info;
- enum gdb_osabi osabi;
- const struct target_desc *target_desc;
-@};
-@end smallexample
-
-@vindex bfd_arch_info
-The @code{bfd_arch_info} member holds the key details about the
-architecture. The @code{byte_order} member is a value in an
-enumeration indicating the endianism. The @code{abfd} member is a
-pointer to the full @sc{bfd}, the @code{tdep_info} member is
-additional custom target specific information, @code{osabi} identifies
-which (if any) of a number of operating specific ABIs are used by this
-architecture and the @code{target_desc} member is a set of name-value
-pairs with information about register usage in this target.
-
-When the @code{struct gdbarch} initialization function is called, not
-all the fields are provided---only those which can be deduced from the
-@sc{bfd}. The @code{struct gdbarch_info}, @var{info} is used as a
-look-up key with the list of existing architectures, @var{arches} to
-see if a suitable architecture already exists. The @var{tdep_info},
-@var{osabi} and @var{target_desc} fields may be added before this
-lookup to refine the search.
-
-Only information in @var{info} should be used to choose the new
-architecture. Historically, @var{info} could be sparse, and
-defaults would be collected from the first element on @var{arches}.
-However, @value{GDBN} now fills in @var{info} more thoroughly,
-so new @code{gdbarch} initialization functions should not take
-defaults from @var{arches}.
-
-@node Creating a New Architecture
-@subsection Creating a New Architecture
-@cindex @code{struct gdbarch} creation
-
-@findex gdbarch_alloc
-@cindex @code{gdbarch_tdep} when allocating new @code{gdbarch}
-If no architecture is found, then a new architecture must be created,
-by calling @code{gdbarch_alloc} using the supplied @code{@w{struct
-gdbarch_info}} and any additional custom target specific
-information in a @code{struct gdbarch_tdep}. The prototype for
-@code{gdbarch_alloc} is:
-
-@smallexample
-struct gdbarch *gdbarch_alloc (const struct gdbarch_info *@var{info},
- struct gdbarch_tdep *@var{tdep});
-@end smallexample
-
-@cindex @code{set_gdbarch} functions
-@cindex @code{gdbarch} accessor functions
-The newly created struct gdbarch must then be populated. Although
-there are default values, in most cases they are not what is
-required.
-
-For each element, @var{X}, there is are a pair of corresponding accessor
-functions, one to set the value of that element,
-@code{set_gdbarch_@var{X}}, the second to either get the value of an
-element (if it is a variable) or to apply the element (if it is a
-function), @code{gdbarch_@var{X}}. Note that both accessor functions
-take a pointer to the @code{@w{struct gdbarch}} as first
-argument. Populating the new @code{gdbarch} should use the
-@code{set_gdbarch} functions.
-
-The following sections identify the main elements that should be set
-in this way. This is not the complete list, but represents the
-functions and elements that must commonly be specified for a new
-architecture. Many of the functions and variables are described in the
-header file @file{gdbarch.h}.
-
-This is the main work in defining a new architecture. Implementing the
-set of functions to populate the @code{struct gdbarch}.
-
-@cindex @code{gdbarch_tdep} definition
-@code{struct gdbarch_tdep} is not defined within @value{GDBN}---it is up
-to the user to define this struct if it is needed to hold custom target
-information that is not covered by the standard @code{@w{struct
-gdbarch}}. For example with the OpenRISC 1000 architecture it is used to
-hold the number of matchpoints available in the target (along with other
-information).
-
-If there is no additional target specific information, it can be set to
-@code{NULL}.
-
-@node Registers and Memory
-@section Registers and Memory
-
-@value{GDBN}'s model of the target machine is rather simple.
-@value{GDBN} assumes the machine includes a bank of registers and a
-block of memory. Each register may have a different size.
-
-@value{GDBN} does not have a magical way to match up with the
-compiler's idea of which registers are which; however, it is critical
-that they do match up accurately. The only way to make this work is
-to get accurate information about the order that the compiler uses,
-and to reflect that in the @code{gdbarch_register_name} and related functions.
-
-@value{GDBN} can handle big-endian, little-endian, and bi-endian architectures.
-
-@node Pointers and Addresses
-@section Pointers Are Not Always Addresses
-@cindex pointer representation
-@cindex address representation
-@cindex word-addressed machines
-@cindex separate data and code address spaces
-@cindex spaces, separate data and code address
-@cindex address spaces, separate data and code
-@cindex code pointers, word-addressed
-@cindex converting between pointers and addresses
-@cindex D10V addresses
-
-On almost all 32-bit architectures, the representation of a pointer is
-indistinguishable from the representation of some fixed-length number
-whose value is the byte address of the object pointed to. On such
-machines, the words ``pointer'' and ``address'' can be used interchangeably.
-However, architectures with smaller word sizes are often cramped for
-address space, so they may choose a pointer representation that breaks this
-identity, and allows a larger code address space.
-
-@c D10V is gone from sources - more current example?
-
-For example, the Renesas D10V is a 16-bit VLIW processor whose
-instructions are 32 bits long@footnote{Some D10V instructions are
-actually pairs of 16-bit sub-instructions. However, since you can't
-jump into the middle of such a pair, code addresses can only refer to
-full 32 bit instructions, which is what matters in this explanation.}.
-If the D10V used ordinary byte addresses to refer to code locations,
-then the processor would only be able to address 64kb of instructions.
-However, since instructions must be aligned on four-byte boundaries, the
-low two bits of any valid instruction's byte address are always
-zero---byte addresses waste two bits. So instead of byte addresses,
-the D10V uses word addresses---byte addresses shifted right two bits---to
-refer to code. Thus, the D10V can use 16-bit words to address 256kb of
-code space.
-
-However, this means that code pointers and data pointers have different
-forms on the D10V. The 16-bit word @code{0xC020} refers to byte address
-@code{0xC020} when used as a data address, but refers to byte address
-@code{0x30080} when used as a code address.
-
-(The D10V also uses separate code and data address spaces, which also
-affects the correspondence between pointers and addresses, but we're
-going to ignore that here; this example is already too long.)
-
-To cope with architectures like this---the D10V is not the only
-one!---@value{GDBN} tries to distinguish between @dfn{addresses}, which are
-byte numbers, and @dfn{pointers}, which are the target's representation
-of an address of a particular type of data. In the example above,
-@code{0xC020} is the pointer, which refers to one of the addresses
-@code{0xC020} or @code{0x30080}, depending on the type imposed upon it.
-@value{GDBN} provides functions for turning a pointer into an address
-and vice versa, in the appropriate way for the current architecture.
-
-Unfortunately, since addresses and pointers are identical on almost all
-processors, this distinction tends to bit-rot pretty quickly. Thus,
-each time you port @value{GDBN} to an architecture which does
-distinguish between pointers and addresses, you'll probably need to
-clean up some architecture-independent code.
-
-Here are functions which convert between pointers and addresses:
-
-@deftypefun CORE_ADDR extract_typed_address (void *@var{buf}, struct type *@var{type})
-Treat the bytes at @var{buf} as a pointer or reference of type
-@var{type}, and return the address it represents, in a manner
-appropriate for the current architecture. This yields an address
-@value{GDBN} can use to read target memory, disassemble, etc. Note that
-@var{buf} refers to a buffer in @value{GDBN}'s memory, not the
-inferior's.
-
-For example, if the current architecture is the Intel x86, this function
-extracts a little-endian integer of the appropriate length from
-@var{buf} and returns it. However, if the current architecture is the
-D10V, this function will return a 16-bit integer extracted from
-@var{buf}, multiplied by four if @var{type} is a pointer to a function.
-
-If @var{type} is not a pointer or reference type, then this function
-will signal an internal error.
-@end deftypefun
-
-@deftypefun CORE_ADDR store_typed_address (void *@var{buf}, struct type *@var{type}, CORE_ADDR @var{addr})
-Store the address @var{addr} in @var{buf}, in the proper format for a
-pointer of type @var{type} in the current architecture. Note that
-@var{buf} refers to a buffer in @value{GDBN}'s memory, not the
-inferior's.
-
-For example, if the current architecture is the Intel x86, this function
-stores @var{addr} unmodified as a little-endian integer of the
-appropriate length in @var{buf}. However, if the current architecture
-is the D10V, this function divides @var{addr} by four if @var{type} is
-a pointer to a function, and then stores it in @var{buf}.
-
-If @var{type} is not a pointer or reference type, then this function
-will signal an internal error.
-@end deftypefun
-
-@deftypefun CORE_ADDR value_as_address (struct value *@var{val})
-Assuming that @var{val} is a pointer, return the address it represents,
-as appropriate for the current architecture.
-
-This function actually works on integral values, as well as pointers.
-For pointers, it performs architecture-specific conversions as
-described above for @code{extract_typed_address}.
-@end deftypefun
-
-@deftypefun CORE_ADDR value_from_pointer (struct type *@var{type}, CORE_ADDR @var{addr})
-Create and return a value representing a pointer of type @var{type} to
-the address @var{addr}, as appropriate for the current architecture.
-This function performs architecture-specific conversions as described
-above for @code{store_typed_address}.
-@end deftypefun
-
-Here are two functions which architectures can define to indicate the
-relationship between pointers and addresses. These have default
-definitions, appropriate for architectures on which all pointers are
-simple unsigned byte addresses.
-
-@deftypefun CORE_ADDR gdbarch_pointer_to_address (struct gdbarch *@var{gdbarch}, struct type *@var{type}, char *@var{buf})
-Assume that @var{buf} holds a pointer of type @var{type}, in the
-appropriate format for the current architecture. Return the byte
-address the pointer refers to.
-
-This function may safely assume that @var{type} is either a pointer or a
-C@t{++} reference type.
-@end deftypefun
-
-@deftypefun void gdbarch_address_to_pointer (struct gdbarch *@var{gdbarch}, struct type *@var{type}, char *@var{buf}, CORE_ADDR @var{addr})
-Store in @var{buf} a pointer of type @var{type} representing the address
-@var{addr}, in the appropriate format for the current architecture.
-
-This function may safely assume that @var{type} is either a pointer or a
-C@t{++} reference type.
-@end deftypefun
-
-@node Address Classes
-@section Address Classes
-@cindex address classes
-@cindex DW_AT_byte_size
-@cindex DW_AT_address_class
-
-Sometimes information about different kinds of addresses is available
-via the debug information. For example, some programming environments
-define addresses of several different sizes. If the debug information
-distinguishes these kinds of address classes through either the size
-info (e.g, @code{DW_AT_byte_size} in @w{DWARF 2}) or through an explicit
-address class attribute (e.g, @code{DW_AT_address_class} in @w{DWARF 2}), the
-following macros should be defined in order to disambiguate these
-types within @value{GDBN} as well as provide the added information to
-a @value{GDBN} user when printing type expressions.
-
-@deftypefun int gdbarch_address_class_type_flags (struct gdbarch *@var{gdbarch}, int @var{byte_size}, int @var{dwarf2_addr_class})
-Returns the type flags needed to construct a pointer type whose size
-is @var{byte_size} and whose address class is @var{dwarf2_addr_class}.
-This function is normally called from within a symbol reader. See
-@file{dwarf2read.c}.
-@end deftypefun
-
-@deftypefun {char *} gdbarch_address_class_type_flags_to_name (struct gdbarch *@var{gdbarch}, int @var{type_flags})
-Given the type flags representing an address class qualifier, return
-its name.
-@end deftypefun
-@deftypefun int gdbarch_address_class_name_to_type_flags (struct gdbarch *@var{gdbarch}, int @var{name}, int *@var{type_flags_ptr})
-Given an address qualifier name, set the @code{int} referenced by @var{type_flags_ptr} to the type flags
-for that address class qualifier.
-@end deftypefun
-
-Since the need for address classes is rather rare, none of
-the address class functions are defined by default. Predicate
-functions are provided to detect when they are defined.
-
-Consider a hypothetical architecture in which addresses are normally
-32-bits wide, but 16-bit addresses are also supported. Furthermore,
-suppose that the @w{DWARF 2} information for this architecture simply
-uses a @code{DW_AT_byte_size} value of 2 to indicate the use of one
-of these "short" pointers. The following functions could be defined
-to implement the address class functions:
-
-@smallexample
-somearch_address_class_type_flags (int byte_size,
- int dwarf2_addr_class)
-@{
- if (byte_size == 2)
- return TYPE_FLAG_ADDRESS_CLASS_1;
- else
- return 0;
-@}
-
-static char *
-somearch_address_class_type_flags_to_name (int type_flags)
-@{
- if (type_flags & TYPE_FLAG_ADDRESS_CLASS_1)
- return "short";
- else
- return NULL;
-@}
-
-int
-somearch_address_class_name_to_type_flags (char *name,
- int *type_flags_ptr)
-@{
- if (strcmp (name, "short") == 0)
- @{
- *type_flags_ptr = TYPE_FLAG_ADDRESS_CLASS_1;
- return 1;
- @}
- else
- return 0;
-@}
-@end smallexample
-
-The qualifier @code{@@short} is used in @value{GDBN}'s type expressions
-to indicate the presence of one of these ``short'' pointers. For
-example if the debug information indicates that @code{short_ptr_var} is
-one of these short pointers, @value{GDBN} might show the following
-behavior:
-
-@smallexample
-(gdb) ptype short_ptr_var
-type = int * @@short
-@end smallexample
-
-
-@node Register Representation
-@section Register Representation
-
-@menu
-* Raw and Cooked Registers::
-* Register Architecture Functions & Variables::
-* Register Information Functions::
-* Register and Memory Data::
-* Register Caching::
-@end menu
-
-@node Raw and Cooked Registers
-@subsection Raw and Cooked Registers
-@cindex raw register representation
-@cindex cooked register representation
-@cindex representations, raw and cooked registers
-
-@value{GDBN} considers registers to be a set with members numbered
-linearly from 0 upwards. The first part of that set corresponds to real
-physical registers, the second part to any @dfn{pseudo-registers}.
-Pseudo-registers have no independent physical existence, but are useful
-representations of information within the architecture. For example the
-OpenRISC 1000 architecture has up to 32 general purpose registers, which
-are typically represented as 32-bit (or 64-bit) integers. However the
-GPRs are also used as operands to the floating point operations, and it
-could be convenient to define a set of pseudo-registers, to show the
-GPRs represented as floating point values.
-
-For any architecture, the implementer will decide on a mapping from
-hardware to @value{GDBN} register numbers. The registers corresponding to real
-hardware are referred to as @dfn{raw} registers, the remaining registers are
-@dfn{pseudo-registers}. The total register set (raw and pseudo) is called
-the @dfn{cooked} register set.
-
-
-@node Register Architecture Functions & Variables
-@subsection Functions and Variables Specifying the Register Architecture
-@cindex @code{gdbarch} register architecture functions
-
-These @code{struct gdbarch} functions and variables specify the number
-and type of registers in the architecture.
-
-@deftypefn {Architecture Function} CORE_ADDR read_pc (struct regcache *@var{regcache})
-@end deftypefn
-@deftypefn {Architecture Function} void write_pc (struct regcache *@var{regcache}, CORE_ADDR @var{val})
-
-Read or write the program counter. The default value of both
-functions is @code{NULL} (no function available). If the program
-counter is just an ordinary register, it can be specified in
-@code{struct gdbarch} instead (see @code{pc_regnum} below) and it will
-be read or written using the standard routines to access registers. This
-function need only be specified if the program counter is not an
-ordinary register.
-
-Any register information can be obtained using the supplied register
-cache, @var{regcache}. @xref{Register Caching, , Register Caching}.
-
-@end deftypefn
-
-@deftypefn {Architecture Function} void pseudo_register_read (struct gdbarch *@var{gdbarch}, struct regcache *@var{regcache}, int @var{regnum}, const gdb_byte *@var{buf})
-@end deftypefn
-@deftypefn {Architecture Function} void pseudo_register_write (struct gdbarch *@var{gdbarch}, struct regcache *@var{regcache}, int @var{regnum}, const gdb_byte *@var{buf})
-
-These functions should be defined if there are any pseudo-registers.
-The default value is @code{NULL}. @var{regnum} is the number of the
-register to read or write (which will be a @dfn{cooked} register
-number) and @var{buf} is the buffer where the value read will be
-placed, or from which the value to be written will be taken. The
-value in the buffer may be converted to or from a signed or unsigned
-integral value using one of the utility functions (@pxref{Register and
-Memory Data, , Using Different Register and Memory Data
-Representations}).
-
-The access should be for the specified architecture,
-@var{gdbarch}. Any register information can be obtained using the
-supplied register cache, @var{regcache}. @xref{Register Caching, ,
-Register Caching}.
-
-@end deftypefn
-
-@deftypevr {Architecture Variable} int sp_regnum
-@vindex sp_regnum
-@cindex stack pointer
-@cindex @kbd{$sp}
-
-This specifies the register holding the stack pointer, which may be a
-raw or pseudo-register. It defaults to -1 (not defined), but it is an
-error for it not to be defined.
-
-The value of the stack pointer register can be accessed withing
-@value{GDBN} as the variable @kbd{$sp}.
-
-@end deftypevr
-
-@deftypevr {Architecture Variable} int pc_regnum
-@vindex pc_regnum
-@cindex program counter
-@cindex @kbd{$pc}
-
-This specifies the register holding the program counter, which may be a
-raw or pseudo-register. It defaults to -1 (not defined). If
-@code{pc_regnum} is not defined, then the functions @code{read_pc} and
-@code{write_pc} (see above) must be defined.
-
-The value of the program counter (whether defined as a register, or
-through @code{read_pc} and @code{write_pc}) can be accessed withing
-@value{GDBN} as the variable @kbd{$pc}.
-
-@end deftypevr
-
-@deftypevr {Architecture Variable} int ps_regnum
-@vindex ps_regnum
-@cindex processor status register
-@cindex status register
-@cindex @kbd{$ps}
-
-This specifies the register holding the processor status (often called
-the status register), which may be a raw or pseudo-register. It
-defaults to -1 (not defined).
-
-If defined, the value of this register can be accessed withing
-@value{GDBN} as the variable @kbd{$ps}.
-
-@end deftypevr
-
-@deftypevr {Architecture Variable} int fp0_regnum
-@vindex fp0_regnum
-@cindex first floating point register
-
-This specifies the first floating point register. It defaults to
-0. @code{fp0_regnum} is not needed unless the target offers support
-for floating point.
-
-@end deftypevr
-
-@node Register Information Functions
-@subsection Functions Giving Register Information
-@cindex @code{gdbarch} register information functions
-
-These functions return information about registers.
-
-@deftypefn {Architecture Function} {const char *} register_name (struct gdbarch *@var{gdbarch}, int @var{regnum})
-
-This function should convert a register number (raw or pseudo) to a
-register name (as a C @code{const char *}). This is used both to
-determine the name of a register for output and to work out the meaning
-of any register names used as input. The function may also return
-@code{NULL}, to indicate that @var{regnum} is not a valid register.
-
-For example with the OpenRISC 1000, @value{GDBN} registers 0-31 are the
-General Purpose Registers, register 32 is the program counter and
-register 33 is the supervision register (i.e.@: the processor status
-register), which map to the strings @code{"gpr00"} through
-@code{"gpr31"}, @code{"pc"} and @code{"sr"} respectively. This means
-that the @value{GDBN} command @kbd{print $gpr5} should print the value of
-the OR1K general purpose register 5@footnote{
-@cindex frame pointer
-@cindex @kbd{$fp}
-Historically, @value{GDBN} always had a concept of a frame pointer
-register, which could be accessed via the @value{GDBN} variable,
-@kbd{$fp}. That concept is now deprecated, recognizing that not all
-architectures have a frame pointer. However if an architecture does
-have a frame pointer register, and defines a register or
-pseudo-register with the name @code{"fp"}, then that register will be
-used as the value of the @kbd{$fp} variable.}.
-
-The default value for this function is @code{NULL}, meaning
-undefined. It should always be defined.
-
-The access should be for the specified architecture, @var{gdbarch}.
-
-@end deftypefn
-
-@deftypefn {Architecture Function} {struct type *} register_type (struct gdbarch *@var{gdbarch}, int @var{regnum})
-
-Given a register number, this function identifies the type of data it
-may be holding, specified as a @code{struct type}. @value{GDBN} allows
-creation of arbitrary types, but a number of built in types are
-provided (@code{builtin_type_void}, @code{builtin_type_int32} etc),
-together with functions to derive types from these.
-
-Typically the program counter will have a type of ``pointer to
-function'' (it points to code), the frame pointer and stack pointer
-will have types of ``pointer to void'' (they point to data on the stack)
-and all other integer registers will have a type of 32-bit integer or
-64-bit integer.
-
-This information guides the formatting when displaying register
-information. The default value is @code{NULL} meaning no information is
-available to guide formatting when displaying registers.
-
-@end deftypefn
-
-@deftypefn {Architecture Function} void print_registers_info (struct gdbarch *@var{gdbarch}, struct ui_file *@var{file}, struct frame_info *@var{frame}, int @var{regnum}, int @var{all})
-
-Define this function to print out one or all of the registers for the
-@value{GDBN} @kbd{info registers} command. The default value is the
-function @code{default_print_registers_info}, which uses the register
-type information (see @code{register_type} above) to determine how each
-register should be printed. Define a custom version of this function
-for fuller control over how the registers are displayed.
-
-The access should be for the specified architecture, @var{gdbarch},
-with output to the file specified by the User Interface
-Independent Output file handle, @var{file} (@pxref{UI-Independent
-Output, , UI-Independent Output---the @code{ui_out}
-Functions}).
-
-The registers should show their values in the frame specified by
-@var{frame}. If @var{regnum} is -1 and @var{all} is zero, then all
-the ``significant'' registers should be shown (the implementer should
-decide which registers are ``significant''). Otherwise only the value of
-the register specified by @var{regnum} should be output. If
-@var{regnum} is -1 and @var{all} is non-zero (true), then the value of
-all registers should be shown.
-
-By default @code{default_print_registers_info} prints one register per
-line, and if @var{all} is zero omits floating-point registers.
-
-@end deftypefn
-
-@deftypefn {Architecture Function} void print_float_info (struct gdbarch *@var{gdbarch}, struct ui_file *@var{file}, struct frame_info *@var{frame}, const char *@var{args})
-
-Define this function to provide output about the floating point unit and
-registers for the @value{GDBN} @kbd{info float} command respectively.
-The default value is @code{NULL} (not defined), meaning no information
-will be provided.
-
-The @var{gdbarch} and @var{file} and @var{frame} arguments have the same
-meaning as in the @code{print_registers_info} function above. The string
-@var{args} contains any supplementary arguments to the @kbd{info float}
-command.
-
-Define this function if the target supports floating point operations.
-
-@end deftypefn
-
-@deftypefn {Architecture Function} void print_vector_info (struct gdbarch *@var{gdbarch}, struct ui_file *@var{file}, struct frame_info *@var{frame}, const char *@var{args})
-
-Define this function to provide output about the vector unit and
-registers for the @value{GDBN} @kbd{info vector} command respectively.
-The default value is @code{NULL} (not defined), meaning no information
-will be provided.
-
-The @var{gdbarch}, @var{file} and @var{frame} arguments have the
-same meaning as in the @code{print_registers_info} function above. The
-string @var{args} contains any supplementary arguments to the @kbd{info
-vector} command.
-
-Define this function if the target supports vector operations.
-
-@end deftypefn
-
-@deftypefn {Architecture Function} int register_reggroup_p (struct gdbarch *@var{gdbarch}, int @var{regnum}, struct reggroup *@var{group})
-
-@value{GDBN} groups registers into different categories (general,
-vector, floating point etc). This function, given a register,
-@var{regnum}, and group, @var{group}, returns 1 (true) if the register
-is in the group and 0 (false) otherwise.
-
-The information should be for the specified architecture,
-@var{gdbarch}
-
-The default value is the function @code{default_register_reggroup_p}
-which will do a reasonable job based on the type of the register (see
-the function @code{register_type} above), with groups for general
-purpose registers, floating point registers, vector registers and raw
-(i.e not pseudo) registers.
-
-@end deftypefn
-
-@node Register and Memory Data
-@subsection Using Different Register and Memory Data Representations
-@cindex register representation
-@cindex memory representation
-@cindex representations, register and memory
-@cindex register data formats, converting
-@cindex @code{struct value}, converting register contents to
-
-Some architectures have different representations of data objects,
-depending whether the object is held in a register or memory. For
-example:
-
-@itemize @bullet
-
-@item
-The Alpha architecture can represent 32 bit integer values in
-floating-point registers.
-
-@item
-The x86 architecture supports 80-bit floating-point registers. The
-@code{long double} data type occupies 96 bits in memory but only 80
-bits when stored in a register.
-
-@end itemize
-
-In general, the register representation of a data type is determined by
-the architecture, or @value{GDBN}'s interface to the architecture, while
-the memory representation is determined by the Application Binary
-Interface.
-
-For almost all data types on almost all architectures, the two
-representations are identical, and no special handling is needed.
-However, they do occasionally differ. An architecture may define the
-following @code{struct gdbarch} functions to request conversions
-between the register and memory representations of a data type:
-
-@deftypefn {Architecture Function} int gdbarch_convert_register_p (struct gdbarch *@var{gdbarch}, int @var{reg})
-
-Return non-zero (true) if the representation of a data value stored in
-this register may be different to the representation of that same data
-value when stored in memory. The default value is @code{NULL}
-(undefined).
-
-If this function is defined and returns non-zero, the @code{struct
-gdbarch} functions @code{gdbarch_register_to_value} and
-@code{gdbarch_value_to_register} (see below) should be used to perform
-any necessary conversion.
-
-If defined, this function should return zero for the register's native
-type, when no conversion is necessary.
-@end deftypefn
-
-@deftypefn {Architecture Function} void gdbarch_register_to_value (struct gdbarch *@var{gdbarch}, int @var{reg}, struct type *@var{type}, char *@var{from}, char *@var{to})
-
-Convert the value of register number @var{reg} to a data object of
-type @var{type}. The buffer at @var{from} holds the register's value
-in raw format; the converted value should be placed in the buffer at
-@var{to}.
-
-@quotation
-@emph{Note:} @code{gdbarch_register_to_value} and
-@code{gdbarch_value_to_register} take their @var{reg} and @var{type}
-arguments in different orders.
-@end quotation
-
-@code{gdbarch_register_to_value} should only be used with registers
-for which the @code{gdbarch_convert_register_p} function returns a
-non-zero value.
-
-@end deftypefn
-
-@deftypefn {Architecture Function} void gdbarch_value_to_register (struct gdbarch *@var{gdbarch}, struct type *@var{type}, int @var{reg}, char *@var{from}, char *@var{to})
-
-Convert a data value of type @var{type} to register number @var{reg}'
-raw format.
-
-@quotation
-@emph{Note:} @code{gdbarch_register_to_value} and
-@code{gdbarch_value_to_register} take their @var{reg} and @var{type}
-arguments in different orders.
-@end quotation
-
-@code{gdbarch_value_to_register} should only be used with registers
-for which the @code{gdbarch_convert_register_p} function returns a
-non-zero value.
-
-@end deftypefn
-
-@node Register Caching
-@subsection Register Caching
-@cindex register caching
-
-Caching of registers is used, so that the target does not need to be
-accessed and reanalyzed multiple times for each register in
-circumstances where the register value cannot have changed.
-
-@cindex @code{struct regcache}
-@value{GDBN} provides @code{struct regcache}, associated with a
-particular @code{struct gdbarch} to hold the cached values of the raw
-registers. A set of functions is provided to access both the raw
-registers (with @code{raw} in their name) and the full set of cooked
-registers (with @code{cooked} in their name). Functions are provided
-to ensure the register cache is kept synchronized with the values of
-the actual registers in the target.
-
-Accessing registers through the @code{struct regcache} routines will
-ensure that the appropriate @code{struct gdbarch} functions are called
-when necessary to access the underlying target architecture. In general
-users should use the @dfn{cooked} functions, since these will map to the
-@dfn{raw} functions automatically as appropriate.
-
-@findex regcache_cooked_read
-@findex regcache_cooked_write
-@cindex @code{gdb_byte}
-@findex regcache_cooked_read_signed
-@findex regcache_cooked_read_unsigned
-@findex regcache_cooked_write_signed
-@findex regcache_cooked_write_unsigned
-The two key functions are @code{regcache_cooked_read} and
-@code{regcache_cooked_write} which read or write a register from or to
-a byte buffer (type @code{gdb_byte *}). For convenience the wrapper
-functions @code{regcache_cooked_read_signed},
-@code{regcache_cooked_read_unsigned},
-@code{regcache_cooked_write_signed} and
-@code{regcache_cooked_write_unsigned} are provided, which read or
-write the value using the buffer and convert to or from an integral
-value as appropriate.
-
-@node Frame Interpretation
-@section Frame Interpretation
-
-@menu
-* All About Stack Frames::
-* Frame Handling Terminology::
-* Prologue Caches::
-* Functions and Variable to Analyze Frames::
-* Functions to Access Frame Data::
-* Analyzing Stacks---Frame Sniffers::
-@end menu
-
-@node All About Stack Frames
-@subsection All About Stack Frames
-
-@value{GDBN} needs to understand the stack on which local (automatic)
-variables are stored. The area of the stack containing all the local
-variables for a function invocation is known as the @dfn{stack frame}
-for that function (or colloquially just as the @dfn{frame}). In turn the
-function that called the function will have its stack frame, and so on
-back through the chain of functions that have been called.
-
-Almost all architectures have one register dedicated to point to the
-end of the stack (the @dfn{stack pointer}). Many have a second register
-which points to the start of the currently active stack frame (the
-@dfn{frame pointer}). The specific arrangements for an architecture are
-a key part of the ABI.
-
-A diagram helps to explain this. Here is a simple program to compute
-factorials:
-
-@smallexample
-#include <stdio.h>
-int fact (int n)
-@{
- if (0 == n)
- @{
- return 1;
- @}
- else
- @{
- return n * fact (n - 1);
- @}
-@}
-
-main ()
-@{
- int i;
-
- for (i = 0; i < 10; i++)
- @{
- int f = fact (i);
- printf ("%d! = %d\n", i, f);
- @}
-@}
-@end smallexample
-
-Consider the state of the stack when the code reaches line 6 after the
-main program has called @code{fact@w{ }(3)}. The chain of function
-calls will be @code{main ()}, @code{fact@w{ }(3)}, @code{fact@w{
-}(2)}, @code{@w{fact (1)}} and @code{fact@w{ }(0)}.
-
-In this illustration the stack is falling (as used for example by the
-OpenRISC 1000 ABI). The stack pointer (SP) is at the end of the stack
-(lowest address) and the frame pointer (FP) is at the highest address
-in the current stack frame. The following diagram shows how the stack
-looks.
-
-@center @image{stack_frame,14cm}
-
-In each stack frame, offset 0 from the stack pointer is the frame
-pointer of the previous frame and offset 4 (this is illustrating a
-32-bit architecture) from the stack pointer is the return address.
-Local variables are indexed from the frame pointer, with negative
-indexes. In the function @code{fact}, offset -4 from the frame
-pointer is the argument @var{n}. In the @code{main} function, offset
--4 from the frame pointer is the local variable @var{i} and offset -8
-from the frame pointer is the local variable @var{f}@footnote{This is
-a simplified example for illustrative purposes only. Good optimizing
-compilers would not put anything on the stack for such simple
-functions. Indeed they might eliminate the recursion and use of the
-stack entirely!}.
-
-It is very easy to get confused when examining stacks. @value{GDBN}
-has terminology it uses rigorously throughout. The stack frame of the
-function currently executing, or where execution stopped is numbered
-zero. In this example frame #0 is the stack frame of the call to
-@code{fact@w{ }(0)}. The stack frame of its calling function
-(@code{fact@w{ }(1)} in this case) is numbered #1 and so on back
-through the chain of calls.
-
-The main @value{GDBN} data structure describing frames is
- @code{@w{struct frame_info}}. It is not used directly, but only via
-its accessor functions. @code{frame_info} includes information about
-the registers in the frame and a pointer to the code of the function
-with which the frame is associated. The entire stack is represented as
-a linked list of @code{frame_info} structs.
-
-@node Frame Handling Terminology
-@subsection Frame Handling Terminology
-
-It is easy to get confused when referencing stack frames. @value{GDBN}
-uses some precise terminology.
-
-@itemize @bullet
-
-@item
-@cindex THIS frame
-@cindex stack frame, definition of THIS frame
-@cindex frame, definition of THIS frame
-@dfn{THIS} frame is the frame currently under consideration.
-
-@item
-@cindex NEXT frame
-@cindex stack frame, definition of NEXT frame
-@cindex frame, definition of NEXT frame
-The @dfn{NEXT} frame, also sometimes called the inner or newer frame is the
-frame of the function called by the function of THIS frame.
-
-@item
-@cindex PREVIOUS frame
-@cindex stack frame, definition of PREVIOUS frame
-@cindex frame, definition of PREVIOUS frame
-The @dfn{PREVIOUS} frame, also sometimes called the outer or older frame is
-the frame of the function which called the function of THIS frame.
-
-@end itemize
-
-So in the example in the previous section (@pxref{All About Stack
-Frames, , All About Stack Frames}), if THIS frame is #3 (the call to
-@code{fact@w{ }(3)}), the NEXT frame is frame #2 (the call to
-@code{fact@w{ }(2)}) and the PREVIOUS frame is frame #4 (the call to
-@code{main@w{ }()}).
-
-@cindex innermost frame
-@cindex stack frame, definition of innermost frame
-@cindex frame, definition of innermost frame
-The @dfn{innermost} frame is the frame of the current executing
-function, or where the program stopped, in this example, in the middle
-of the call to @code{@w{fact (0))}}. It is always numbered frame #0.
-
-@cindex base of a frame
-@cindex stack frame, definition of base of a frame
-@cindex frame, definition of base of a frame
-The @dfn{base} of a frame is the address immediately before the start
-of the NEXT frame. For a stack which grows down in memory (a
-@dfn{falling} stack) this will be the lowest address and for a stack
-which grows up in memory (a @dfn{rising} stack) this will be the
-highest address in the frame.
-
-@value{GDBN} functions to analyze the stack are typically given a
-pointer to the NEXT frame to determine information about THIS
-frame. Information about THIS frame includes data on where the
-registers of the PREVIOUS frame are stored in this stack frame. In
-this example the frame pointer of the PREVIOUS frame is stored at
-offset 0 from the stack pointer of THIS frame.
-
-@cindex unwinding
-@cindex stack frame, definition of unwinding
-@cindex frame, definition of unwinding
-The process whereby a function is given a pointer to the NEXT
-frame to work out information about THIS frame is referred to as
-@dfn{unwinding}. The @value{GDBN} functions involved in this typically
-include unwind in their name.
-
-@cindex sniffing
-@cindex stack frame, definition of sniffing
-@cindex frame, definition of sniffing
-The process of analyzing a target to determine the information that
-should go in struct frame_info is called @dfn{sniffing}. The functions
-that carry this out are called sniffers and typically include sniffer
-in their name. More than one sniffer may be required to extract all
-the information for a particular frame.
-
-@cindex sentinel frame
-@cindex stack frame, definition of sentinel frame
-@cindex frame, definition of sentinel frame
-Because so many functions work using the NEXT frame, there is an issue
-about addressing the innermost frame---it has no NEXT frame. To solve
-this @value{GDBN} creates a dummy frame #-1, known as the
-@dfn{sentinel} frame.
-
-@node Prologue Caches
-@subsection Prologue Caches
-
-@cindex function prologue
-@cindex prologue of a function
-All the frame sniffing functions typically examine the code at the
-start of the corresponding function, to determine the state of
-registers. The ABI will save old values and set new values of key
-registers at the start of each function in what is known as the
-function @dfn{prologue}.
-
-@cindex prologue cache
-For any particular stack frame this data does not change, so all the
-standard unwinding functions, in addition to receiving a pointer to
-the NEXT frame as their first argument, receive a pointer to a
-@dfn{prologue cache} as their second argument. This can be used to store
-values associated with a particular frame, for reuse on subsequent
-calls involving the same frame.
-
-It is up to the user to define the structure used (it is a
-@code{void@w{ }*} pointer) and arrange allocation and deallocation of
-storage. However for general use, @value{GDBN} provides
-@code{@w{struct trad_frame_cache}}, with a set of accessor
-routines. This structure holds the stack and code address of
-THIS frame, the base address of the frame, a pointer to the
-struct @code{frame_info} for the NEXT frame and details of
-where the registers of the PREVIOUS frame may be found in THIS
-frame.
-
-Typically the first time any sniffer function is called with NEXT
-frame, the prologue sniffer for THIS frame will be @code{NULL}. The
-sniffer will analyze the frame, allocate a prologue cache structure
-and populate it. Subsequent calls using the same NEXT frame will
-pass in this prologue cache, so the data can be returned with no
-additional analysis.
-
-@node Functions and Variable to Analyze Frames
-@subsection Functions and Variable to Analyze Frames
-
-These struct @code{gdbarch} functions and variable should be defined
-to provide analysis of the stack frame and allow it to be adjusted as
-required.
-
-@deftypefn {Architecture Function} CORE_ADDR skip_prologue (struct gdbarch *@var{gdbarch}, CORE_ADDR @var{pc})
-
-The prologue of a function is the code at the beginning of the
-function which sets up the stack frame, saves the return address
-etc. The code representing the behavior of the function starts after
-the prologue.
-
-This function skips past the prologue of a function if the program
-counter, @var{pc}, is within the prologue of a function. The result is
-the program counter immediately after the prologue. With modern
-optimizing compilers, this may be a far from trivial exercise. However
-the required information may be within the binary as DWARF2 debugging
-information, making the job much easier.
-
-The default value is @code{NULL} (not defined). This function should always
-be provided, but can take advantage of DWARF2 debugging information,
-if that is available.
-
-@end deftypefn
-
-@deftypefn {Architecture Function} int inner_than (CORE_ADDR @var{lhs}, CORE_ADDR @var{rhs})
-@findex core_addr_lessthan
-@findex core_addr_greaterthan
-
-Given two frame or stack pointers, return non-zero (true) if the first
-represents the @dfn{inner} stack frame and 0 (false) otherwise. This
-is used to determine whether the target has a stack which grows up in
-memory (rising stack) or grows down in memory (falling stack).
-@xref{All About Stack Frames, , All About Stack Frames}, for an
-explanation of @dfn{inner} frames.
-
-The default value of this function is @code{NULL} and it should always
-be defined. However for almost all architectures one of the built-in
-functions can be used: @code{core_addr_lessthan} (for stacks growing
-down in memory) or @code{core_addr_greaterthan} (for stacks growing up
-in memory).
-
-@end deftypefn
-
-@anchor{frame_align}
-@deftypefn {Architecture Function} CORE_ADDR frame_align (struct gdbarch *@var{gdbarch}, CORE_ADDR @var{address})
-@findex align_down
-@findex align_up
-
-The architecture may have constraints on how its frames are
-aligned. For example the OpenRISC 1000 ABI requires stack frames to be
-double-word aligned, but 32-bit versions of the architecture allocate
-single-word values to the stack. Thus extra padding may be needed at
-the end of a stack frame.
-
-Given a proposed address for the stack pointer, this function
-returns a suitably aligned address (by expanding the stack frame).
-
-The default value is @code{NULL} (undefined). This function should be defined
-for any architecture where it is possible the stack could become
-misaligned. The utility functions @code{align_down} (for falling
-stacks) and @code{align_up} (for rising stacks) will facilitate the
-implementation of this function.
-
-@end deftypefn
-
-@deftypevr {Architecture Variable} int frame_red_zone_size
-
-Some ABIs reserve space beyond the end of the stack for use by leaf
-functions without prologue or epilogue or by exception handlers (for
-example the OpenRISC 1000).
-
-This is known as a @dfn{red zone} (AMD terminology). The @sc{amd64}
-(nee x86-64) ABI documentation refers to the @dfn{red zone} when
-describing this scratch area.
-
-The default value is 0. Set this field if the architecture has such a
-red zone. The value must be aligned as required by the ABI (see
-@code{frame_align} above for an explanation of stack frame alignment).
-
-@end deftypevr
-
-@node Functions to Access Frame Data
-@subsection Functions to Access Frame Data
-
-These functions provide access to key registers and arguments in the
-stack frame.
-
-@deftypefn {Architecture Function} CORE_ADDR unwind_pc (struct gdbarch *@var{gdbarch}, struct frame_info *@var{next_frame})
-
-This function is given a pointer to the NEXT stack frame (@pxref{All
-About Stack Frames, , All About Stack Frames}, for how frames are
-represented) and returns the value of the program counter in the
-PREVIOUS frame (i.e.@: the frame of the function that called THIS
-one). This is commonly referred to as the @dfn{return address}.
-
-The implementation, which must be frame agnostic (work with any frame),
-is typically no more than:
-
-@smallexample
-ULONGEST pc;
-pc = frame_unwind_register_unsigned (next_frame, @var{ARCH}_PC_REGNUM);
-return gdbarch_addr_bits_remove (gdbarch, pc);
-@end smallexample
-
-@end deftypefn
-
-@deftypefn {Architecture Function} CORE_ADDR unwind_sp (struct gdbarch *@var{gdbarch}, struct frame_info *@var{next_frame})
-
-This function is given a pointer to the NEXT stack frame
-(@pxref{All About Stack Frames, , All About Stack Frames} for how
-frames are represented) and returns the value of the stack pointer in
-the PREVIOUS frame (i.e.@: the frame of the function that called
-THIS one).
-
-The implementation, which must be frame agnostic (work with any frame),
-is typically no more than:
-
-@smallexample
-ULONGEST sp;
-sp = frame_unwind_register_unsigned (next_frame, @var{ARCH}_SP_REGNUM);
-return gdbarch_addr_bits_remove (gdbarch, sp);
-@end smallexample
-
-@end deftypefn
-
-@deftypefn {Architecture Function} int frame_num_args (struct gdbarch *@var{gdbarch}, struct frame_info *@var{this_frame})
-
-This function is given a pointer to THIS stack frame (@pxref{All
-About Stack Frames, , All About Stack Frames} for how frames are
-represented), and returns the number of arguments that are being
-passed, or -1 if not known.
-
-The default value is @code{NULL} (undefined), in which case the number of
-arguments passed on any stack frame is always unknown. For many
-architectures this will be a suitable default.
-
-@end deftypefn
-
-@node Analyzing Stacks---Frame Sniffers
-@subsection Analyzing Stacks---Frame Sniffers
-
-When a program stops, @value{GDBN} needs to construct the chain of
-struct @code{frame_info} representing the state of the stack using
-appropriate @dfn{sniffers}.
-
-Each architecture requires appropriate sniffers, but they do not form
-entries in @code{@w{struct gdbarch}}, since more than one sniffer may
-be required and a sniffer may be suitable for more than one
-@code{@w{struct gdbarch}}. Instead sniffers are associated with
-architectures using the following functions.
-
-@itemize @bullet
-
-@item
-@findex frame_unwind_append_sniffer
-@code{frame_unwind_append_sniffer} is used to add a new sniffer to
-analyze THIS frame when given a pointer to the NEXT frame.
-
-@item
-@findex frame_base_append_sniffer
-@code{frame_base_append_sniffer} is used to add a new sniffer
-which can determine information about the base of a stack frame.
-
-@item
-@findex frame_base_set_default
-@code{frame_base_set_default} is used to specify the default base
-sniffer.
-
-@end itemize
-
-These functions all take a reference to @code{@w{struct gdbarch}}, so
-they are associated with a specific architecture. They are usually
-called in the @code{gdbarch} initialization function, after the
-@code{gdbarch} struct has been set up. Unless a default has been set, the
-most recently appended sniffer will be tried first.
-
-The main frame unwinding sniffer (as set by
-@code{frame_unwind_append_sniffer)} returns a structure specifying
-a set of sniffing functions:
-
-@cindex @code{frame_unwind}
-@smallexample
-struct frame_unwind
-@{
- enum frame_type type;
- frame_this_id_ftype *this_id;
- frame_prev_register_ftype *prev_register;
- const struct frame_data *unwind_data;
- frame_sniffer_ftype *sniffer;
- frame_prev_pc_ftype *prev_pc;
- frame_dealloc_cache_ftype *dealloc_cache;
-@};
-@end smallexample
-
-The @code{type} field indicates the type of frame this sniffer can
-handle: normal, dummy (@pxref{Functions Creating Dummy Frames, ,
-Functions Creating Dummy Frames}), signal handler or sentinel. Signal
-handlers sometimes have their own simplified stack structure for
-efficiency, so may need their own handlers.
-
-The @code{unwind_data} field holds additional information which may be
-relevant to particular types of frame. For example it may hold
-additional information for signal handler frames.
-
-The remaining fields define functions that yield different types of
-information when given a pointer to the NEXT stack frame. Not all
-functions need be provided. If an entry is @code{NULL}, the next sniffer will
-be tried instead.
-
-@itemize @bullet
-
-@item
-@code{this_id} determines the stack pointer and function (code
-entry point) for THIS stack frame.
-
-@item
-@code{prev_register} determines where the values of registers for
-the PREVIOUS stack frame are stored in THIS stack frame.
-
-@item
-@code{sniffer} takes a look at THIS frame's registers to
-determine if this is the appropriate unwinder.
-
-@item
-@code{prev_pc} determines the program counter for THIS
-frame. Only needed if the program counter is not an ordinary register
-(@pxref{Register Architecture Functions & Variables,
-, Functions and Variables Specifying the Register Architecture}).
-
-@item
-@code{dealloc_cache} frees any additional memory associated with
-the prologue cache for this frame (@pxref{Prologue Caches, , Prologue
-Caches}).
-
-@end itemize
-
-In general it is only the @code{this_id} and @code{prev_register}
-fields that need be defined for custom sniffers.
-
-The frame base sniffer is much simpler. It is a @code{@w{struct
-frame_base}}, which refers to the corresponding @code{frame_unwind}
-struct and whose fields refer to functions yielding various addresses
-within the frame.
-
-@cindex @code{frame_base}
-@smallexample
-struct frame_base
-@{
- const struct frame_unwind *unwind;
- frame_this_base_ftype *this_base;
- frame_this_locals_ftype *this_locals;
- frame_this_args_ftype *this_args;
-@};
-@end smallexample
-
-All the functions referred to take a pointer to the NEXT frame as
-argument. The function referred to by @code{this_base} returns the
-base address of THIS frame, the function referred to by
-@code{this_locals} returns the base address of local variables in THIS
-frame and the function referred to by @code{this_args} returns the
-base address of the function arguments in this frame.
-
-As described above, the base address of a frame is the address
-immediately before the start of the NEXT frame. For a falling
-stack, this is the lowest address in the frame and for a rising stack
-it is the highest address in the frame. For most architectures the
-same address is also the base address for local variables and
-arguments, in which case the same function can be used for all three
-entries@footnote{It is worth noting that if it cannot be determined in any
-other way (for example by there being a register with the name
-@code{"fp"}), then the result of the @code{this_base} function will be
-used as the value of the frame pointer variable @kbd{$fp} in
-@value{GDBN}. This is very often not correct (for example with the
-OpenRISC 1000, this value is the stack pointer, @kbd{$sp}). In this
-case a register (raw or pseudo) with the name @code{"fp"} should be
-defined. It will be used in preference as the value of @kbd{$fp}.}.
-
-@node Inferior Call Setup
-@section Inferior Call Setup
-@cindex calls to the inferior
-
-@menu
-* About Dummy Frames::
-* Functions Creating Dummy Frames::
-@end menu
-
-@node About Dummy Frames
-@subsection About Dummy Frames
-@cindex dummy frames
-
-@value{GDBN} can call functions in the target code (for example by
-using the @kbd{call} or @kbd{print} commands). These functions may be
-breakpointed, and it is essential that if a function does hit a
-breakpoint, commands like @kbd{backtrace} work correctly.
-
-This is achieved by making the stack look as though the function had
-been called from the point where @value{GDBN} had previously stopped.
-This requires that @value{GDBN} can set up stack frames appropriate for
-such function calls.
-
-@node Functions Creating Dummy Frames
-@subsection Functions Creating Dummy Frames
-
-The following functions provide the functionality to set up such
-@dfn{dummy} stack frames.
-
-@deftypefn {Architecture Function} CORE_ADDR push_dummy_call (struct gdbarch *@var{gdbarch}, struct value *@var{function}, struct regcache *@var{regcache}, CORE_ADDR @var{bp_addr}, int @var{nargs}, struct value **@var{args}, CORE_ADDR @var{sp}, int @var{struct_return}, CORE_ADDR @var{struct_addr})
-
-This function sets up a dummy stack frame for the function about to be
-called. @code{push_dummy_call} is given the arguments to be passed
-and must copy them into registers or push them on to the stack as
-appropriate for the ABI.
-
-@var{function} is a pointer to the function
-that will be called and @var{regcache} the register cache from which
-values should be obtained. @var{bp_addr} is the address to which the
-function should return (which is breakpointed, so @value{GDBN} can
-regain control, hence the name). @var{nargs} is the number of
-arguments to pass and @var{args} an array containing the argument
-values. @var{struct_return} is non-zero (true) if the function returns
-a structure, and if so @var{struct_addr} is the address in which the
-structure should be returned.
-
- After calling this function, @value{GDBN} will pass control to the
-target at the address of the function, which will find the stack and
-registers set up just as expected.
-
-The default value of this function is @code{NULL} (undefined). If the
-function is not defined, then @value{GDBN} will not allow the user to
-call functions within the target being debugged.
-
-@end deftypefn
-
-@deftypefn {Architecture Function} {struct frame_id} unwind_dummy_id (struct gdbarch *@var{gdbarch}, struct frame_info *@var{next_frame})
-
-This is the inverse of @code{push_dummy_call} which restores the stack
-pointer and program counter after a call to evaluate a function using
-a dummy stack frame. The result is a @code{@w{struct frame_id}}, which
-contains the value of the stack pointer and program counter to be
-used.
-
-The NEXT frame pointer is provided as argument,
-@var{next_frame}. THIS frame is the frame of the dummy function,
-which can be unwound, to yield the required stack pointer and program
-counter from the PREVIOUS frame.
-
-The default value is @code{NULL} (undefined). If @code{push_dummy_call} is
-defined, then this function should also be defined.
-
-@end deftypefn
-
-@deftypefn {Architecture Function} CORE_ADDR push_dummy_code (struct gdbarch *@var{gdbarch}, CORE_ADDR @var{sp}, CORE_ADDR @var{funaddr}, struct value **@var{args}, int @var{nargs}, struct type *@var{value_type}, CORE_ADDR *@var{real_pc}, CORE_ADDR *@var{bp_addr}, struct regcache *@var{regcache})
-
-If this function is not defined (its default value is @code{NULL}), a dummy
-call will use the entry point of the currently loaded code on the
-target as its return address. A temporary breakpoint will be set
-there, so the location must be writable and have room for a
-breakpoint.
-
-It is possible that this default is not suitable. It might not be
-writable (in ROM possibly), or the ABI might require code to be
-executed on return from a call to unwind the stack before the
-breakpoint is encountered.
-
-If either of these is the case, then push_dummy_code should be defined
-to push an instruction sequence onto the end of the stack to which the
-dummy call should return.
-
-The arguments are essentially the same as those to
-@code{push_dummy_call}. However the function is provided with the
-type of the function result, @var{value_type}, @var{bp_addr} is used
-to return a value (the address at which the breakpoint instruction
-should be inserted) and @var{real pc} is used to specify the resume
-address when starting the call sequence. The function should return
-the updated innermost stack address.
-
-@quotation
-@emph{Note:} This does require that code in the stack can be executed.
-Some Harvard architectures may not allow this.
-@end quotation
-
-@end deftypefn
-
-@node Adding support for debugging core files
-@section Adding support for debugging core files
-@cindex core files
-
-The prerequisite for adding core file support in @value{GDBN} is to have
-core file support in BFD.
-
-Once BFD support is available, writing the apropriate
-@code{regset_from_core_section} architecture function should be all
-that is needed in order to add support for core files in @value{GDBN}.
-
-@node Defining Other Architecture Features
-@section Defining Other Architecture Features
-
-This section describes other functions and values in @code{gdbarch},
-together with some useful macros, that you can use to define the
-target architecture.
-
-@table @code
-
-@item CORE_ADDR gdbarch_addr_bits_remove (@var{gdbarch}, @var{addr})
-@findex gdbarch_addr_bits_remove
-If a raw machine instruction address includes any bits that are not
-really part of the address, then this function is used to zero those bits in
-@var{addr}. This is only used for addresses of instructions, and even then not
-in all contexts.
-
-For example, the two low-order bits of the PC on the Hewlett-Packard PA
-2.0 architecture contain the privilege level of the corresponding
-instruction. Since instructions must always be aligned on four-byte
-boundaries, the processor masks out these bits to generate the actual
-address of the instruction. @code{gdbarch_addr_bits_remove} would then for
-example look like that:
-@smallexample
-arch_addr_bits_remove (CORE_ADDR addr)
-@{
- return (addr &= ~0x3);
-@}
-@end smallexample
-
-@item int address_class_name_to_type_flags (@var{gdbarch}, @var{name}, @var{type_flags_ptr})
-@findex address_class_name_to_type_flags
-If @var{name} is a valid address class qualifier name, set the @code{int}
-referenced by @var{type_flags_ptr} to the mask representing the qualifier
-and return 1. If @var{name} is not a valid address class qualifier name,
-return 0.
-
-The value for @var{type_flags_ptr} should be one of
-@code{TYPE_FLAG_ADDRESS_CLASS_1}, @code{TYPE_FLAG_ADDRESS_CLASS_2}, or
-possibly some combination of these values or'd together.
-@xref{Target Architecture Definition, , Address Classes}.
-
-@item int address_class_name_to_type_flags_p (@var{gdbarch})
-@findex address_class_name_to_type_flags_p
-Predicate which indicates whether @code{address_class_name_to_type_flags}
-has been defined.
-
-@item int gdbarch_address_class_type_flags (@var{gdbarch}, @var{byte_size}, @var{dwarf2_addr_class})
-@findex gdbarch_address_class_type_flags
-Given a pointers byte size (as described by the debug information) and
-the possible @code{DW_AT_address_class} value, return the type flags
-used by @value{GDBN} to represent this address class. The value
-returned should be one of @code{TYPE_FLAG_ADDRESS_CLASS_1},
-@code{TYPE_FLAG_ADDRESS_CLASS_2}, or possibly some combination of these
-values or'd together.
-@xref{Target Architecture Definition, , Address Classes}.
-
-@item int gdbarch_address_class_type_flags_p (@var{gdbarch})
-@findex gdbarch_address_class_type_flags_p
-Predicate which indicates whether @code{gdbarch_address_class_type_flags_p} has
-been defined.
-
-@item const char *gdbarch_address_class_type_flags_to_name (@var{gdbarch}, @var{type_flags})
-@findex gdbarch_address_class_type_flags_to_name
-Return the name of the address class qualifier associated with the type
-flags given by @var{type_flags}.
-
-@item int gdbarch_address_class_type_flags_to_name_p (@var{gdbarch})
-@findex gdbarch_address_class_type_flags_to_name_p
-Predicate which indicates whether @code{gdbarch_address_class_type_flags_to_name} has been defined.
-@xref{Target Architecture Definition, , Address Classes}.
-
-@item void gdbarch_address_to_pointer (@var{gdbarch}, @var{type}, @var{buf}, @var{addr})
-@findex gdbarch_address_to_pointer
-Store in @var{buf} a pointer of type @var{type} representing the address
-@var{addr}, in the appropriate format for the current architecture.
-This function may safely assume that @var{type} is either a pointer or a
-C@t{++} reference type.
-@xref{Target Architecture Definition, , Pointers Are Not Always Addresses}.
-
-@item int gdbarch_believe_pcc_promotion (@var{gdbarch})
-@findex gdbarch_believe_pcc_promotion
-Used to notify if the compiler promotes a @code{short} or @code{char}
-parameter to an @code{int}, but still reports the parameter as its
-original type, rather than the promoted type.
-
-@item gdbarch_bits_big_endian (@var{gdbarch})
-@findex gdbarch_bits_big_endian
-This is used if the numbering of bits in the targets does @strong{not} match
-the endianism of the target byte order. A value of 1 means that the bits
-are numbered in a big-endian bit order, 0 means little-endian.
-
-@item set_gdbarch_bits_big_endian (@var{gdbarch}, @var{bits_big_endian})
-@findex set_gdbarch_bits_big_endian
-Calling set_gdbarch_bits_big_endian with a value of 1 indicates that the
-bits in the target are numbered in a big-endian bit order, 0 indicates
-little-endian.
-
-@item BREAKPOINT
-@findex BREAKPOINT
-This is the character array initializer for the bit pattern to put into
-memory where a breakpoint is set. Although it's common to use a trap
-instruction for a breakpoint, it's not required; for instance, the bit
-pattern could be an invalid instruction. The breakpoint must be no
-longer than the shortest instruction of the architecture.
-
-@code{BREAKPOINT} has been deprecated in favor of
-@code{gdbarch_breakpoint_from_pc}.
-
-@item BIG_BREAKPOINT
-@itemx LITTLE_BREAKPOINT
-@findex LITTLE_BREAKPOINT
-@findex BIG_BREAKPOINT
-Similar to BREAKPOINT, but used for bi-endian targets.
-
-@code{BIG_BREAKPOINT} and @code{LITTLE_BREAKPOINT} have been deprecated in
-favor of @code{gdbarch_breakpoint_from_pc}.
-
-@item const gdb_byte *gdbarch_breakpoint_from_pc (@var{gdbarch}, @var{pcptr}, @var{lenptr})
-@findex gdbarch_breakpoint_from_pc
-@anchor{gdbarch_breakpoint_from_pc} Use the program counter to determine the
-contents and size of a breakpoint instruction. It returns a pointer to
-a static string of bytes that encode a breakpoint instruction, stores the
-length of the string to @code{*@var{lenptr}}, and adjusts the program
-counter (if necessary) to point to the actual memory location where the
-breakpoint should be inserted. On input, the program counter
-(@code{*@var{pcptr}} is the encoded inferior's PC register. If software
-breakpoints are supported, the function sets this argument to the PC's
-plain address. If software breakpoints are not supported, the function
-returns NULL instead of the encoded breakpoint instruction.
-
-Although it is common to use a trap instruction for a breakpoint, it's
-not required; for instance, the bit pattern could be an invalid
-instruction. The breakpoint must be no longer than the shortest
-instruction of the architecture.
-
-Provided breakpoint bytes can be also used by @code{bp_loc_is_permanent} to
-detect permanent breakpoints. @code{gdbarch_breakpoint_from_pc} should return
-an unchanged memory copy if it was called for a location with permanent
-breakpoint as some architectures use breakpoint instructions containing
-arbitrary parameter value.
-
-Replaces all the other @var{BREAKPOINT} macros.
-
-@item int gdbarch_memory_insert_breakpoint (@var{gdbarch}, @var{bp_tgt})
-@itemx gdbarch_memory_remove_breakpoint (@var{gdbarch}, @var{bp_tgt})
-@findex gdbarch_memory_remove_breakpoint
-@findex gdbarch_memory_insert_breakpoint
-Insert or remove memory based breakpoints. Reasonable defaults
-(@code{default_memory_insert_breakpoint} and
-@code{default_memory_remove_breakpoint} respectively) have been
-provided so that it is not necessary to set these for most
-architectures. Architectures which may want to set
-@code{gdbarch_memory_insert_breakpoint} and @code{gdbarch_memory_remove_breakpoint} will likely have instructions that are oddly sized or are not stored in a
-conventional manner.
-
-It may also be desirable (from an efficiency standpoint) to define
-custom breakpoint insertion and removal routines if
-@code{gdbarch_breakpoint_from_pc} needs to read the target's memory for some
-reason.
-
-@item CORE_ADDR gdbarch_adjust_breakpoint_address (@var{gdbarch}, @var{bpaddr})
-@findex gdbarch_adjust_breakpoint_address
-@cindex breakpoint address adjusted
-Given an address at which a breakpoint is desired, return a breakpoint
-address adjusted to account for architectural constraints on
-breakpoint placement. This method is not needed by most targets.
-
-The FR-V target (see @file{frv-tdep.c}) requires this method.
-The FR-V is a VLIW architecture in which a number of RISC-like
-instructions are grouped (packed) together into an aggregate
-instruction or instruction bundle. When the processor executes
-one of these bundles, the component instructions are executed
-in parallel.
-
-In the course of optimization, the compiler may group instructions
-from distinct source statements into the same bundle. The line number
-information associated with one of the latter statements will likely
-refer to some instruction other than the first one in the bundle. So,
-if the user attempts to place a breakpoint on one of these latter
-statements, @value{GDBN} must be careful to @emph{not} place the break
-instruction on any instruction other than the first one in the bundle.
-(Remember though that the instructions within a bundle execute
-in parallel, so the @emph{first} instruction is the instruction
-at the lowest address and has nothing to do with execution order.)
-
-The FR-V's @code{gdbarch_adjust_breakpoint_address} method will adjust a
-breakpoint's address by scanning backwards for the beginning of
-the bundle, returning the address of the bundle.
-
-Since the adjustment of a breakpoint may significantly alter a user's
-expectation, @value{GDBN} prints a warning when an adjusted breakpoint
-is initially set and each time that that breakpoint is hit.
-
-@item int gdbarch_call_dummy_location (@var{gdbarch})
-@findex gdbarch_call_dummy_location
-See the file @file{inferior.h}.
-
-This method has been replaced by @code{gdbarch_push_dummy_code}
-(@pxref{gdbarch_push_dummy_code}).
-
-@item int gdbarch_cannot_fetch_register (@var{gdbarch}, @var{regum})
-@findex gdbarch_cannot_fetch_register
-This function should return nonzero if @var{regno} cannot be fetched
-from an inferior process.
-
-@item int gdbarch_cannot_store_register (@var{gdbarch}, @var{regnum})
-@findex gdbarch_cannot_store_register
-This function should return nonzero if @var{regno} should not be
-written to the target. This is often the case for program counters,
-status words, and other special registers. This function returns 0 as
-default so that @value{GDBN} will assume that all registers may be written.
-
-@item int gdbarch_convert_register_p (@var{gdbarch}, @var{regnum}, struct type *@var{type})
-@findex gdbarch_convert_register_p
-Return non-zero if register @var{regnum} represents data values of type
-@var{type} in a non-standard form.
-@xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}.
-
-@item int gdbarch_fp0_regnum (@var{gdbarch})
-@findex gdbarch_fp0_regnum
-This function returns the number of the first floating point register,
-if the machine has such registers. Otherwise, it returns -1.
-
-@item CORE_ADDR gdbarch_decr_pc_after_break (@var{gdbarch})
-@findex gdbarch_decr_pc_after_break
-This function shall return the amount by which to decrement the PC after the
-program encounters a breakpoint. This is often the number of bytes in
-@code{BREAKPOINT}, though not always. For most targets this value will be 0.
-
-@item DISABLE_UNSETTABLE_BREAK (@var{addr})
-@findex DISABLE_UNSETTABLE_BREAK
-If defined, this should evaluate to 1 if @var{addr} is in a shared
-library in which breakpoints cannot be set and so should be disabled.
-
-@item int gdbarch_dwarf2_reg_to_regnum (@var{gdbarch}, @var{dwarf2_regnr})
-@findex gdbarch_dwarf2_reg_to_regnum
-Convert DWARF2 register number @var{dwarf2_regnr} into @value{GDBN} regnum.
-If not defined, no conversion will be performed.
-
-@item int gdbarch_ecoff_reg_to_regnum (@var{gdbarch}, @var{ecoff_regnr})
-@findex gdbarch_ecoff_reg_to_regnum
-Convert ECOFF register number @var{ecoff_regnr} into @value{GDBN} regnum. If
-not defined, no conversion will be performed.
-
-@item GCC_COMPILED_FLAG_SYMBOL
-@itemx GCC2_COMPILED_FLAG_SYMBOL
-@findex GCC2_COMPILED_FLAG_SYMBOL
-@findex GCC_COMPILED_FLAG_SYMBOL
-If defined, these are the names of the symbols that @value{GDBN} will
-look for to detect that GCC compiled the file. The default symbols
-are @code{gcc_compiled.} and @code{gcc2_compiled.},
-respectively. (Currently only defined for the Delta 68.)
-
-@item gdbarch_get_longjmp_target
-@findex gdbarch_get_longjmp_target
-This function determines the target PC address that @code{longjmp}
-will jump to, assuming that we have just stopped at a @code{longjmp}
-breakpoint. It takes a @code{CORE_ADDR *} as argument, and stores the
-target PC value through this pointer. It examines the current state
-of the machine as needed, typically by using a manually-determined
-offset into the @code{jmp_buf}. (While we might like to get the offset
-from the target's @file{jmpbuf.h}, that header file cannot be assumed
-to be available when building a cross-debugger.)
-
-@item I386_USE_GENERIC_WATCHPOINTS
-An x86-based target can define this to use the generic x86 watchpoint
-support; see @ref{Algorithms, I386_USE_GENERIC_WATCHPOINTS}.
-
-@item gdbarch_in_function_epilogue_p (@var{gdbarch}, @var{addr})
-@findex gdbarch_in_function_epilogue_p
-Returns non-zero if the given @var{addr} is in the epilogue of a function.
-The epilogue of a function is defined as the part of a function where
-the stack frame of the function already has been destroyed up to the
-final `return from function call' instruction.
-
-@item int gdbarch_in_solib_return_trampoline (@var{gdbarch}, @var{pc}, @var{name})
-@findex gdbarch_in_solib_return_trampoline
-Define this function to return nonzero if the program is stopped in the
-trampoline that returns from a shared library.
-
-@item target_so_ops.in_dynsym_resolve_code (@var{pc})
-@findex in_dynsym_resolve_code
-Define this to return nonzero if the program is stopped in the
-dynamic linker.
-
-@item SKIP_SOLIB_RESOLVER (@var{pc})
-@findex SKIP_SOLIB_RESOLVER
-Define this to evaluate to the (nonzero) address at which execution
-should continue to get past the dynamic linker's symbol resolution
-function. A zero value indicates that it is not important or necessary
-to set a breakpoint to get through the dynamic linker and that single
-stepping will suffice.
-
-@item CORE_ADDR gdbarch_integer_to_address (@var{gdbarch}, @var{type}, @var{buf})
-@findex gdbarch_integer_to_address
-@cindex converting integers to addresses
-Define this when the architecture needs to handle non-pointer to address
-conversions specially. Converts that value to an address according to
-the current architectures conventions.
-
-@emph{Pragmatics: When the user copies a well defined expression from
-their source code and passes it, as a parameter, to @value{GDBN}'s
-@code{print} command, they should get the same value as would have been
-computed by the target program. Any deviation from this rule can cause
-major confusion and annoyance, and needs to be justified carefully. In
-other words, @value{GDBN} doesn't really have the freedom to do these
-conversions in clever and useful ways. It has, however, been pointed
-out that users aren't complaining about how @value{GDBN} casts integers
-to pointers; they are complaining that they can't take an address from a
-disassembly listing and give it to @code{x/i}. Adding an architecture
-method like @code{gdbarch_integer_to_address} certainly makes it possible for
-@value{GDBN} to ``get it right'' in all circumstances.}
-
-@xref{Target Architecture Definition, , Pointers Are Not Always
-Addresses}.
-
-@item CORE_ADDR gdbarch_pointer_to_address (@var{gdbarch}, @var{type}, @var{buf})
-@findex gdbarch_pointer_to_address
-Assume that @var{buf} holds a pointer of type @var{type}, in the
-appropriate format for the current architecture. Return the byte
-address the pointer refers to.
-@xref{Target Architecture Definition, , Pointers Are Not Always Addresses}.
-
-@item void gdbarch_register_to_value(@var{gdbarch}, @var{frame}, @var{regnum}, @var{type}, @var{fur})
-@findex gdbarch_register_to_value
-Convert the raw contents of register @var{regnum} into a value of type
-@var{type}.
-@xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}.
-
-@item REGISTER_CONVERT_TO_VIRTUAL(@var{reg}, @var{type}, @var{from}, @var{to})
-@findex REGISTER_CONVERT_TO_VIRTUAL
-Convert the value of register @var{reg} from its raw form to its virtual
-form.
-@xref{Target Architecture Definition, , Raw and Virtual Register Representations}.
-
-@item REGISTER_CONVERT_TO_RAW(@var{type}, @var{reg}, @var{from}, @var{to})
-@findex REGISTER_CONVERT_TO_RAW
-Convert the value of register @var{reg} from its virtual form to its raw
-form.
-@xref{Target Architecture Definition, , Raw and Virtual Register Representations}.
-
-@item const struct regset *regset_from_core_section (struct gdbarch * @var{gdbarch}, const char * @var{sect_name}, size_t @var{sect_size})
-@findex regset_from_core_section
-Return the appropriate register set for a core file section with name
-@var{sect_name} and size @var{sect_size}.
-
-@item SOFTWARE_SINGLE_STEP_P()
-@findex SOFTWARE_SINGLE_STEP_P
-Define this as 1 if the target does not have a hardware single-step
-mechanism. The macro @code{SOFTWARE_SINGLE_STEP} must also be defined.
-
-@item SOFTWARE_SINGLE_STEP(@var{signal}, @var{insert_breakpoints_p})
-@findex SOFTWARE_SINGLE_STEP
-A function that inserts or removes (depending on
-@var{insert_breakpoints_p}) breakpoints at each possible destinations of
-the next instruction. See @file{sparc-tdep.c} and @file{rs6000-tdep.c}
-for examples.
-
-@item set_gdbarch_sofun_address_maybe_missing (@var{gdbarch}, @var{set})
-@findex set_gdbarch_sofun_address_maybe_missing
-Somebody clever observed that, the more actual addresses you have in the
-debug information, the more time the linker has to spend relocating
-them. So whenever there's some other way the debugger could find the
-address it needs, you should omit it from the debug info, to make
-linking faster.
-
-Calling @code{set_gdbarch_sofun_address_maybe_missing} with a non-zero
-argument @var{set} indicates that a particular set of hacks of this sort
-are in use, affecting @code{N_SO} and @code{N_FUN} entries in stabs-format
-debugging information. @code{N_SO} stabs mark the beginning and ending
-addresses of compilation units in the text segment. @code{N_FUN} stabs
-mark the starts and ends of functions.
-
-In this case, @value{GDBN} assumes two things:
-
-@itemize @bullet
-@item
-@code{N_FUN} stabs have an address of zero. Instead of using those
-addresses, you should find the address where the function starts by
-taking the function name from the stab, and then looking that up in the
-minsyms (the linker/assembler symbol table). In other words, the stab
-has the name, and the linker/assembler symbol table is the only place
-that carries the address.
-
-@item
-@code{N_SO} stabs have an address of zero, too. You just look at the
-@code{N_FUN} stabs that appear before and after the @code{N_SO} stab, and
-guess the starting and ending addresses of the compilation unit from them.
-@end itemize
-
-@item int gdbarch_stabs_argument_has_addr (@var{gdbarch}, @var{type})
-@findex gdbarch_stabs_argument_has_addr
-@anchor{gdbarch_stabs_argument_has_addr} Define this function to return
-nonzero if a function argument of type @var{type} is passed by reference
-instead of value.
-
-@item CORE_ADDR gdbarch_push_dummy_call (@var{gdbarch}, @var{function}, @var{regcache}, @var{bp_addr}, @var{nargs}, @var{args}, @var{sp}, @var{struct_return}, @var{struct_addr})
-@findex gdbarch_push_dummy_call
-@anchor{gdbarch_push_dummy_call} Define this to push the dummy frame's call to
-the inferior function onto the stack. In addition to pushing @var{nargs}, the
-code should push @var{struct_addr} (when @var{struct_return} is non-zero), and
-the return address (@var{bp_addr}, in inferior's PC register encoding).
-
-@var{function} is a pointer to a @code{struct value}; on architectures that use
-function descriptors, this contains the function descriptor value.
-
-Returns the updated top-of-stack pointer.
-
-@item CORE_ADDR gdbarch_push_dummy_code (@var{gdbarch}, @var{sp}, @var{funaddr}, @var{using_gcc}, @var{args}, @var{nargs}, @var{value_type}, @var{real_pc}, @var{bp_addr}, @var{regcache})
-@findex gdbarch_push_dummy_code
-@anchor{gdbarch_push_dummy_code} Given a stack based call dummy, push the
-instruction sequence (including space for a breakpoint) to which the
-called function should return.
-
-Set @var{bp_addr} to the address at which the breakpoint instruction
-should be inserted (in inferior's PC register encoding), @var{real_pc} to the
-resume address when starting the call sequence, and return the updated
-inner-most stack address.
-
-By default, the stack is grown sufficient to hold a frame-aligned
-(@pxref{frame_align}) breakpoint, @var{bp_addr} is set to the address
-reserved for that breakpoint (in inferior's PC register encoding), and
-@var{real_pc} set to @var{funaddr}.
-
-This method replaces @w{@code{gdbarch_call_dummy_location (@var{gdbarch})}}.
-
-@item int gdbarch_sdb_reg_to_regnum (@var{gdbarch}, @var{sdb_regnr})
-@findex gdbarch_sdb_reg_to_regnum
-Use this function to convert sdb register @var{sdb_regnr} into @value{GDBN}
-regnum. If not defined, no conversion will be done.
-
-@item enum return_value_convention gdbarch_return_value (struct gdbarch *@var{gdbarch}, struct type *@var{valtype}, struct regcache *@var{regcache}, void *@var{readbuf}, const void *@var{writebuf})
-@findex gdbarch_return_value
-@anchor{gdbarch_return_value} Given a function with a return-value of
-type @var{rettype}, return which return-value convention that function
-would use.
-
-@value{GDBN} currently recognizes two function return-value conventions:
-@code{RETURN_VALUE_REGISTER_CONVENTION} where the return value is found
-in registers; and @code{RETURN_VALUE_STRUCT_CONVENTION} where the return
-value is found in memory and the address of that memory location is
-passed in as the function's first parameter.
-
-If the register convention is being used, and @var{writebuf} is
-non-@code{NULL}, also copy the return-value in @var{writebuf} into
-@var{regcache}.
-
-If the register convention is being used, and @var{readbuf} is
-non-@code{NULL}, also copy the return value from @var{regcache} into
-@var{readbuf} (@var{regcache} contains a copy of the registers from the
-just returned function).
-
-@emph{Maintainer note: This method replaces separate predicate, extract,
-store methods. By having only one method, the logic needed to determine
-the return-value convention need only be implemented in one place. If
-@value{GDBN} were written in an @sc{oo} language, this method would
-instead return an object that knew how to perform the register
-return-value extract and store.}
-
-@emph{Maintainer note: This method does not take a @var{gcc_p}
-parameter, and such a parameter should not be added. If an architecture
-that requires per-compiler or per-function information be identified,
-then the replacement of @var{rettype} with @code{struct value}
-@var{function} should be pursued.}
-
-@emph{Maintainer note: The @var{regcache} parameter limits this methods
-to the inner most frame. While replacing @var{regcache} with a
-@code{struct frame_info} @var{frame} parameter would remove that
-limitation there has yet to be a demonstrated need for such a change.}
-
-@item void gdbarch_skip_permanent_breakpoint (@var{gdbarch}, @var{regcache})
-@findex gdbarch_skip_permanent_breakpoint
-Advance the inferior's PC past a permanent breakpoint. @value{GDBN} normally
-steps over a breakpoint by removing it, stepping one instruction, and
-re-inserting the breakpoint. However, permanent breakpoints are
-hardwired into the inferior, and can't be removed, so this strategy
-doesn't work. Calling @code{gdbarch_skip_permanent_breakpoint} adjusts the
-processor's state so that execution will resume just after the breakpoint.
-This function does the right thing even when the breakpoint is in the delay slot
-of a branch or jump.
-
-@item CORE_ADDR gdbarch_skip_trampoline_code (@var{gdbarch}, @var{frame}, @var{pc})
-@findex gdbarch_skip_trampoline_code
-If the target machine has trampoline code that sits between callers and
-the functions being called, then define this function to return a new PC
-that is at the start of the real function.
-
-@item int gdbarch_deprecated_fp_regnum (@var{gdbarch})
-@findex gdbarch_deprecated_fp_regnum
-If the frame pointer is in a register, use this function to return the
-number of that register.
-
-@item int gdbarch_stab_reg_to_regnum (@var{gdbarch}, @var{stab_regnr})
-@findex gdbarch_stab_reg_to_regnum
-Use this function to convert stab register @var{stab_regnr} into @value{GDBN}
-regnum. If not defined, no conversion will be done.
-
-@item TARGET_CHAR_BIT
-@findex TARGET_CHAR_BIT
-Number of bits in a char; defaults to 8.
-
-@item int gdbarch_char_signed (@var{gdbarch})
-@findex gdbarch_char_signed
-Non-zero if @code{char} is normally signed on this architecture; zero if
-it should be unsigned.
-
-The ISO C standard requires the compiler to treat @code{char} as
-equivalent to either @code{signed char} or @code{unsigned char}; any
-character in the standard execution set is supposed to be positive.
-Most compilers treat @code{char} as signed, but @code{char} is unsigned
-on the IBM S/390, RS6000, and PowerPC targets.
-
-@item int gdbarch_double_bit (@var{gdbarch})
-@findex gdbarch_double_bit
-Number of bits in a double float; defaults to @w{@code{8 * TARGET_CHAR_BIT}}.
-
-@item int gdbarch_float_bit (@var{gdbarch})
-@findex gdbarch_float_bit
-Number of bits in a float; defaults to @w{@code{4 * TARGET_CHAR_BIT}}.
-
-@item int gdbarch_int_bit (@var{gdbarch})
-@findex gdbarch_int_bit
-Number of bits in an integer; defaults to @w{@code{4 * TARGET_CHAR_BIT}}.
-
-@item int gdbarch_long_bit (@var{gdbarch})
-@findex gdbarch_long_bit
-Number of bits in a long integer; defaults to @w{@code{4 * TARGET_CHAR_BIT}}.
-
-@item int gdbarch_long_double_bit (@var{gdbarch})
-@findex gdbarch_long_double_bit
-Number of bits in a long double float;
-defaults to @w{@code{2 * gdbarch_double_bit (@var{gdbarch})}}.
-
-@item int gdbarch_long_long_bit (@var{gdbarch})
-@findex gdbarch_long_long_bit
-Number of bits in a long long integer; defaults to
-@w{@code{2 * gdbarch_long_bit (@var{gdbarch})}}.
-
-@item int gdbarch_ptr_bit (@var{gdbarch})
-@findex gdbarch_ptr_bit
-Number of bits in a pointer; defaults to
-@w{@code{gdbarch_int_bit (@var{gdbarch})}}.
-
-@item int gdbarch_short_bit (@var{gdbarch})
-@findex gdbarch_short_bit
-Number of bits in a short integer; defaults to @w{@code{2 * TARGET_CHAR_BIT}}.
-
-@item void gdbarch_virtual_frame_pointer (@var{gdbarch}, @var{pc}, @var{frame_regnum}, @var{frame_offset})
-@findex gdbarch_virtual_frame_pointer
-Returns a @code{(@var{register}, @var{offset})} pair representing the virtual
-frame pointer in use at the code address @var{pc}. If virtual frame
-pointers are not used, a default definition simply returns
-@code{gdbarch_deprecated_fp_regnum} (or @code{gdbarch_sp_regnum}, if
-no frame pointer is defined), with an offset of zero.
-
-@c need to explain virtual frame pointers, they are recorded in agent
-@c expressions for tracepoints
-
-@item TARGET_HAS_HARDWARE_WATCHPOINTS
-If non-zero, the target has support for hardware-assisted
-watchpoints. @xref{Algorithms, watchpoints}, for more details and
-other related macros.
-
-@item int gdbarch_print_insn (@var{gdbarch}, @var{vma}, @var{info})
-@findex gdbarch_print_insn
-This is the function used by @value{GDBN} to print an assembly
-instruction. It prints the instruction at address @var{vma} in
-debugged memory and returns the length of the instruction, in bytes.
-This usually points to a function in the @code{opcodes} library
-(@pxref{Support Libraries, ,Opcodes}). @var{info} is a structure (of
-type @code{disassemble_info}) defined in the header file
-@file{include/dis-asm.h}, and used to pass information to the
-instruction decoding routine.
-
-@item frame_id gdbarch_dummy_id (@var{gdbarch}, @var{frame})
-@findex gdbarch_dummy_id
-@anchor{gdbarch_dummy_id} Given @var{frame} return a @w{@code{struct
-frame_id}} that uniquely identifies an inferior function call's dummy
-frame. The value returned must match the dummy frame stack value
-previously saved by @code{call_function_by_hand}.
-
-@item void gdbarch_value_to_register (@var{gdbarch}, @var{frame}, @var{type}, @var{buf})
-@findex gdbarch_value_to_register
-Convert a value of type @var{type} into the raw contents of a register.
-@xref{Target Architecture Definition, , Using Different Register and Memory Data Representations}.
-
-@end table
-
-Motorola M68K target conditionals.
-
-@ftable @code
-@item BPT_VECTOR
-Define this to be the 4-bit location of the breakpoint trap vector. If
-not defined, it will default to @code{0xf}.
-
-@item REMOTE_BPT_VECTOR
-Defaults to @code{1}.
-
-@end ftable
-
-@node Adding a New Target
-@section Adding a New Target
-
-@cindex adding a target
-The following files add a target to @value{GDBN}:
-
-@table @file
-@cindex target dependent files
-
-@item gdb/@var{ttt}-tdep.c
-Contains any miscellaneous code required for this target machine. On
-some machines it doesn't exist at all.
-
-@item gdb/@var{arch}-tdep.c
-@itemx gdb/@var{arch}-tdep.h
-This is required to describe the basic layout of the target machine's
-processor chip (registers, stack, etc.). It can be shared among many
-targets that use the same processor architecture.
-
-@end table
-
-(Target header files such as
-@file{gdb/config/@var{arch}/tm-@var{ttt}.h},
-@file{gdb/config/@var{arch}/tm-@var{arch}.h}, and
-@file{config/tm-@var{os}.h} are no longer used.)
-
-@findex _initialize_@var{arch}_tdep
-A @value{GDBN} description for a new architecture, arch is created by
-defining a global function @code{_initialize_@var{arch}_tdep}, by
-convention in the source file @file{@var{arch}-tdep.c}. For
-example, in the case of the OpenRISC 1000, this function is called
-@code{_initialize_or1k_tdep} and is found in the file
-@file{or1k-tdep.c}.
-
-The object file resulting from compiling this source file, which will
-contain the implementation of the
-@code{_initialize_@var{arch}_tdep} function is specified in the
-@value{GDBN} @file{configure.tgt} file, which includes a large case
-statement pattern matching against the @code{--target} option of the
-@kbd{configure} script.
-
-@quotation
-@emph{Note:} If the architecture requires multiple source files, the
-corresponding binaries should be included in
-@file{configure.tgt}. However if there are header files, the
-dependencies on these will not be picked up from the entries in
-@file{configure.tgt}. The @file{Makefile.in} file will need extending to
-show these dependencies.
-@end quotation
-
-@findex gdbarch_register
-A new struct gdbarch, defining the new architecture, is created within
-the @code{_initialize_@var{arch}_tdep} function by calling
-@code{gdbarch_register}:
-
-@smallexample
-void gdbarch_register (enum bfd_architecture architecture,
- gdbarch_init_ftype *init_func,
- gdbarch_dump_tdep_ftype *tdep_dump_func);
-@end smallexample
-
-This function has been described fully in an earlier
-section. @xref{How an Architecture is Represented, , How an
-Architecture is Represented}.
-
-The new @code{@w{struct gdbarch}} should contain implementations of
-the necessary functions (described in the previous sections) to
-describe the basic layout of the target machine's processor chip
-(registers, stack, etc.). It can be shared among many targets that use
-the same processor architecture.
-
-@node Target Descriptions
-@chapter Target Descriptions
-@cindex target descriptions
-
-The target architecture definition (@pxref{Target Architecture Definition})
-contains @value{GDBN}'s hard-coded knowledge about an architecture. For
-some platforms, it is handy to have more flexible knowledge about a specific
-instance of the architecture---for instance, a processor or development board.
-@dfn{Target descriptions} provide a mechanism for the user to tell @value{GDBN}
-more about what their target supports, or for the target to tell @value{GDBN}
-directly.
-
-For details on writing, automatically supplying, and manually selecting
-target descriptions, see @ref{Target Descriptions, , , gdb,
-Debugging with @value{GDBN}}. This section will cover some related
-topics about the @value{GDBN} internals.
-
-@menu
-* Target Descriptions Implementation::
-* Adding Target Described Register Support::
-@end menu
-
-@node Target Descriptions Implementation
-@section Target Descriptions Implementation
-@cindex target descriptions, implementation
-
-Before @value{GDBN} connects to a new target, or runs a new program on
-an existing target, it discards any existing target description and
-reverts to a default gdbarch. Then, after connecting, it looks for a
-new target description by calling @code{target_find_description}.
-
-A description may come from a user specified file (XML), the remote
-@samp{qXfer:features:read} packet (also XML), or from any custom
-@code{to_read_description} routine in the target vector. For instance,
-the remote target supports guessing whether a MIPS target is 32-bit or
-64-bit based on the size of the @samp{g} packet.
-
-If any target description is found, @value{GDBN} creates a new gdbarch
-incorporating the description by calling @code{gdbarch_update_p}. Any
-@samp{<architecture>} element is handled first, to determine which
-architecture's gdbarch initialization routine is called to create the
-new architecture. Then the initialization routine is called, and has
-a chance to adjust the constructed architecture based on the contents
-of the target description. For instance, it can recognize any
-properties set by a @code{to_read_description} routine. Also
-see @ref{Adding Target Described Register Support}.
-
-@node Adding Target Described Register Support
-@section Adding Target Described Register Support
-@cindex target descriptions, adding register support
-
-Target descriptions can report additional registers specific to an
-instance of the target. But it takes a little work in the architecture
-specific routines to support this.
-
-A target description must either have no registers or a complete
-set---this avoids complexity in trying to merge standard registers
-with the target defined registers. It is the architecture's
-responsibility to validate that a description with registers has
-everything it needs. To keep architecture code simple, the same
-mechanism is used to assign fixed internal register numbers to
-standard registers.
-
-If @code{tdesc_has_registers} returns 1, the description contains
-registers. The architecture's @code{gdbarch_init} routine should:
-
-@itemize @bullet
-
-@item
-Call @code{tdesc_data_alloc} to allocate storage, early, before
-searching for a matching gdbarch or allocating a new one.
-
-@item
-Use @code{tdesc_find_feature} to locate standard features by name.
-
-@item
-Use @code{tdesc_numbered_register} and @code{tdesc_numbered_register_choices}
-to locate the expected registers in the standard features.
-
-@item
-Return @code{NULL} if a required feature is missing, or if any standard
-feature is missing expected registers. This will produce a warning that
-the description was incomplete.
-
-@item
-Free the allocated data before returning, unless @code{tdesc_use_registers}
-is called.
-
-@item
-Call @code{set_gdbarch_num_regs} as usual, with a number higher than any
-fixed number passed to @code{tdesc_numbered_register}.
-
-@item
-Call @code{tdesc_use_registers} after creating a new gdbarch, before
-returning it.
-
-@end itemize
-
-After @code{tdesc_use_registers} has been called, the architecture's
-@code{register_name}, @code{register_type}, and @code{register_reggroup_p}
-routines will not be called; that information will be taken from
-the target description. @code{num_regs} may be increased to account
-for any additional registers in the description.
-
-Pseudo-registers require some extra care:
-
-@itemize @bullet
-
-@item
-Using @code{tdesc_numbered_register} allows the architecture to give
-constant register numbers to standard architectural registers, e.g.@:
-as an @code{enum} in @file{@var{arch}-tdep.h}. But because
-pseudo-registers are always numbered above @code{num_regs},
-which may be increased by the description, constant numbers
-can not be used for pseudos. They must be numbered relative to
-@code{num_regs} instead.
-
-@item
-The description will not describe pseudo-registers, so the
-architecture must call @code{set_tdesc_pseudo_register_name},
-@code{set_tdesc_pseudo_register_type}, and
-@code{set_tdesc_pseudo_register_reggroup_p} to supply routines
-describing pseudo registers. These routines will be passed
-internal register numbers, so the same routines used for the
-gdbarch equivalents are usually suitable.
-
-@end itemize
-
-
-@node Target Vector Definition
-
-@chapter Target Vector Definition
-@cindex target vector
-
-The target vector defines the interface between @value{GDBN}'s
-abstract handling of target systems, and the nitty-gritty code that
-actually exercises control over a process or a serial port.
-@value{GDBN} includes some 30-40 different target vectors; however,
-each configuration of @value{GDBN} includes only a few of them.
-
-@menu
-* Managing Execution State::
-* Existing Targets::
-@end menu
-
-@node Managing Execution State
-@section Managing Execution State
-@cindex execution state
-
-A target vector can be completely inactive (not pushed on the target
-stack), active but not running (pushed, but not connected to a fully
-manifested inferior), or completely active (pushed, with an accessible
-inferior). Most targets are only completely inactive or completely
-active, but some support persistent connections to a target even
-when the target has exited or not yet started.
-
-For example, connecting to the simulator using @code{target sim} does
-not create a running program. Neither registers nor memory are
-accessible until @code{run}. Similarly, after @code{kill}, the
-program can not continue executing. But in both cases @value{GDBN}
-remains connected to the simulator, and target-specific commands
-are directed to the simulator.
-
-A target which only supports complete activation should push itself
-onto the stack in its @code{to_open} routine (by calling
-@code{push_target}), and unpush itself from the stack in its
-@code{to_mourn_inferior} routine (by calling @code{unpush_target}).
-
-A target which supports both partial and complete activation should
-still call @code{push_target} in @code{to_open}, but not call
-@code{unpush_target} in @code{to_mourn_inferior}. Instead, it should
-call either @code{target_mark_running} or @code{target_mark_exited}
-in its @code{to_open}, depending on whether the target is fully active
-after connection. It should also call @code{target_mark_running} any
-time the inferior becomes fully active (e.g.@: in
-@code{to_create_inferior} and @code{to_attach}), and
-@code{target_mark_exited} when the inferior becomes inactive (in
-@code{to_mourn_inferior}). The target should also make sure to call
-@code{target_mourn_inferior} from its @code{to_kill}, to return the
-target to inactive state.
-
-@node Existing Targets
-@section Existing Targets
-@cindex targets
-
-@subsection File Targets
-
-Both executables and core files have target vectors.
-
-@subsection Standard Protocol and Remote Stubs
-
-@value{GDBN}'s file @file{remote.c} talks a serial protocol to code that
-runs in the target system. @value{GDBN} provides several sample
-@dfn{stubs} that can be integrated into target programs or operating
-systems for this purpose; they are named @file{@var{cpu}-stub.c}. Many
-operating systems, embedded targets, emulators, and simulators already
-have a @value{GDBN} stub built into them, and maintenance of the remote
-protocol must be careful to preserve compatibility.
-
-The @value{GDBN} user's manual describes how to put such a stub into
-your target code. What follows is a discussion of integrating the
-SPARC stub into a complicated operating system (rather than a simple
-program), by Stu Grossman, the author of this stub.
-
-The trap handling code in the stub assumes the following upon entry to
-@code{trap_low}:
-
-@enumerate
-@item
-%l1 and %l2 contain pc and npc respectively at the time of the trap;
-
-@item
-traps are disabled;
-
-@item
-you are in the correct trap window.
-@end enumerate
-
-As long as your trap handler can guarantee those conditions, then there
-is no reason why you shouldn't be able to ``share'' traps with the stub.
-The stub has no requirement that it be jumped to directly from the
-hardware trap vector. That is why it calls @code{exceptionHandler()},
-which is provided by the external environment. For instance, this could
-set up the hardware traps to actually execute code which calls the stub
-first, and then transfers to its own trap handler.
-
-For the most point, there probably won't be much of an issue with
-``sharing'' traps, as the traps we use are usually not used by the kernel,
-and often indicate unrecoverable error conditions. Anyway, this is all
-controlled by a table, and is trivial to modify. The most important
-trap for us is for @code{ta 1}. Without that, we can't single step or
-do breakpoints. Everything else is unnecessary for the proper operation
-of the debugger/stub.
-
-From reading the stub, it's probably not obvious how breakpoints work.
-They are simply done by deposit/examine operations from @value{GDBN}.
-
-@subsection ROM Monitor Interface
-
-@subsection Custom Protocols
-
-@subsection Transport Layer
-
-@subsection Builtin Simulator
-
-
-@node Native Debugging
-
-@chapter Native Debugging
-@cindex native debugging
-
-Several files control @value{GDBN}'s configuration for native support:
-
-@table @file
-@vindex NATDEPFILES
-@item gdb/config/@var{arch}/@var{xyz}.mh
-Specifies Makefile fragments needed by a @emph{native} configuration on
-machine @var{xyz}. In particular, this lists the required
-native-dependent object files, by defining @samp{NATDEPFILES=@dots{}}.
-Also specifies the header file which describes native support on
-@var{xyz}, by defining @samp{NAT_FILE= nm-@var{xyz}.h}. You can also
-define @samp{NAT_CFLAGS}, @samp{NAT_ADD_FILES}, @samp{NAT_CLIBS},
-@samp{NAT_CDEPS}, @samp{NAT_GENERATED_FILES}, etc.; see @file{Makefile.in}.
-
-@emph{Maintainer's note: The @file{.mh} suffix is because this file
-originally contained @file{Makefile} fragments for hosting @value{GDBN}
-on machine @var{xyz}. While the file is no longer used for this
-purpose, the @file{.mh} suffix remains. Perhaps someone will
-eventually rename these fragments so that they have a @file{.mn}
-suffix.}
-
-@item gdb/config/@var{arch}/nm-@var{xyz}.h
-(@file{nm.h} is a link to this file, created by @code{configure}). Contains C
-macro definitions describing the native system environment, such as
-child process control and core file support.
-
-@item gdb/@var{xyz}-nat.c
-Contains any miscellaneous C code required for this native support of
-this machine. On some machines it doesn't exist at all.
-@end table
-
-There are some ``generic'' versions of routines that can be used by
-various systems. These can be customized in various ways by macros
-defined in your @file{nm-@var{xyz}.h} file. If these routines work for
-the @var{xyz} host, you can just include the generic file's name (with
-@samp{.o}, not @samp{.c}) in @code{NATDEPFILES}.
-
-Otherwise, if your machine needs custom support routines, you will need
-to write routines that perform the same functions as the generic file.
-Put them into @file{@var{xyz}-nat.c}, and put @file{@var{xyz}-nat.o}
-into @code{NATDEPFILES}.
-
-@table @file
-@item inftarg.c
-This contains the @emph{target_ops vector} that supports Unix child
-processes on systems which use ptrace and wait to control the child.
-
-@item procfs.c
-This contains the @emph{target_ops vector} that supports Unix child
-processes on systems which use /proc to control the child.
-
-@item fork-child.c
-This does the low-level grunge that uses Unix system calls to do a ``fork
-and exec'' to start up a child process.
-
-@item infptrace.c
-This is the low level interface to inferior processes for systems using
-the Unix @code{ptrace} call in a vanilla way.
-@end table
-
-@section ptrace
-
-@section /proc
-
-@section win32
-
-@section shared libraries
-
-@subsection AIX Shared Library Support
-
-Shared library support on AIX is based on reading some data provided
-by the loader. With a live process, this information is accessed
-via a @code{ptrace} call (@code{PT_LDINFO}), while it is obtained
-by reading the @samp{.ldinfo} section when debugging from a core file.
-In both cases, the data has the same format, provided by the
-@file{sys/ldr.h} system header file.
-
-Internally, the relevant portions of the loader information is
-transformed into an XML representation, which lists all objects
-currently mapped in memory. The associated DTD can be found in
-@file{gdb/features/library-list-aix.dtd}. For each library element,
-the following parameters are reported:
-
-@itemize @minus
-
-@item
-@code{name}, the path name of an object. This is usually the name
-of an archive, or the name of the main executable.
-
-@item
-If the @code{name} parameter refers to an archive, @code{member} provides
-the name of the object inside the archive on which the program depends.
-Otherwise, this field should be omitted.
-
-@item
-@code{text_addr}, the address where the @code{.text} section was mapped
-in memory.
-
-@item
-@code{text_size}, the size of the @code{.text} section.
-
-@item
-@code{data_addr}, the address where the @code{.data} section was mapped
-in memory.
-
-@item
-@code{data_size}, the size of the @code{.data} section.
-
-@end itemize
-
-By convention, the library list always has at least one element, and
-the first entry always refers to the main executable.
-
-Below is an example of such XML representation for a small program:
-
-@smallexample
-<library-list-aix version="1.0">
- <library name="simple"
- text_addr="0x0000000010000000"
- text_size="128720"
- data_addr="0x0000000020000f00"
- data_size="31148">
- </library>
- <library name="/lib/libc.a"
- member="shr.o"
- text_addr="0x00000000d0100700"
- text_size="4152684"
- data_addr="0x00000000f0633e50"
- data_size="875944">
- </library>
-</library-list-aix>
-@end smallexample
-
-In that example, the list shows that the main executable is named
-@file{simple}, and its text section was loaded at 0x10000000.
-This program depends on member @file{shr.o} from the @file{/lib/libc.a}
-archive, whose text and data sections were loaded at (resp.)
-0xd0100700 and 0xf0633e50.
-
-@section Native Conditionals
-@cindex native conditionals
-
-When @value{GDBN} is configured and compiled, various macros are
-defined or left undefined, to control compilation when the host and
-target systems are the same. These macros should be defined (or left
-undefined) in @file{nm-@var{system}.h}.
-
-@table @code
-
-@item I386_USE_GENERIC_WATCHPOINTS
-An x86-based machine can define this to use the generic x86 watchpoint
-support; see @ref{Algorithms, I386_USE_GENERIC_WATCHPOINTS}.
-
-@item START_INFERIOR_TRAPS_EXPECTED
-@findex START_INFERIOR_TRAPS_EXPECTED
-When starting an inferior, @value{GDBN} normally expects to trap
-twice; once when
-the shell execs, and once when the program itself execs. If the actual
-number of traps is something other than 2, then define this macro to
-expand into the number expected.
-
-@end table
-
-@node Support Libraries
-
-@chapter Support Libraries
-
-@section BFD
-@cindex BFD library
-
-BFD provides support for @value{GDBN} in several ways:
-
-@table @emph
-@item identifying executable and core files
-BFD will identify a variety of file types, including a.out, coff, and
-several variants thereof, as well as several kinds of core files.
-
-@item access to sections of files
-BFD parses the file headers to determine the names, virtual addresses,
-sizes, and file locations of all the various named sections in files
-(such as the text section or the data section). @value{GDBN} simply
-calls BFD to read or write section @var{x} at byte offset @var{y} for
-length @var{z}.
-
-@item specialized core file support
-BFD provides routines to determine the failing command name stored in a
-core file, the signal with which the program failed, and whether a core
-file matches (i.e.@: could be a core dump of) a particular executable
-file.
-
-@item locating the symbol information
-@value{GDBN} uses an internal interface of BFD to determine where to find the
-symbol information in an executable file or symbol-file. @value{GDBN} itself
-handles the reading of symbols, since BFD does not ``understand'' debug
-symbols, but @value{GDBN} uses BFD's cached information to find the symbols,
-string table, etc.
-@end table
-
-@section opcodes
-@cindex opcodes library
-
-The opcodes library provides @value{GDBN}'s disassembler. (It's a separate
-library because it's also used in binutils, for @file{objdump}).
-
-@section readline
-@cindex readline library
-The @code{readline} library provides a set of functions for use by applications
-that allow users to edit command lines as they are typed in.
-
-@section libiberty
-@cindex @code{libiberty} library
-
-The @code{libiberty} library provides a set of functions and features
-that integrate and improve on functionality found in modern operating
-systems. Broadly speaking, such features can be divided into three
-groups: supplemental functions (functions that may be missing in some
-environments and operating systems), replacement functions (providing
-a uniform and easier to use interface for commonly used standard
-functions), and extensions (which provide additional functionality
-beyond standard functions).
-
-@value{GDBN} uses various features provided by the @code{libiberty}
-library, for instance the C@t{++} demangler, the @acronym{IEEE}
-floating format support functions, the input options parser
-@samp{getopt}, the @samp{obstack} extension, and other functions.
-
-@subsection @code{obstacks} in @value{GDBN}
-@cindex @code{obstacks}
-
-The obstack mechanism provides a convenient way to allocate and free
-chunks of memory. Each obstack is a pool of memory that is managed
-like a stack. Objects (of any nature, size and alignment) are
-allocated and freed in a @acronym{LIFO} fashion on an obstack (see
-@code{libiberty}'s documentation for a more detailed explanation of
-@code{obstacks}).
-
-The most noticeable use of the @code{obstacks} in @value{GDBN} is in
-object files. There is an obstack associated with each internal
-representation of an object file. Lots of things get allocated on
-these @code{obstacks}: dictionary entries, blocks, blockvectors,
-symbols, minimal symbols, types, vectors of fundamental types, class
-fields of types, object files section lists, object files section
-offset lists, line tables, symbol tables, partial symbol tables,
-string tables, symbol table private data, macros tables, debug
-information sections and entries, import and export lists (som),
-unwind information (hppa), dwarf2 location expressions data. Plus
-various strings such as directory names strings, debug format strings,
-names of types.
-
-An essential and convenient property of all data on @code{obstacks} is
-that memory for it gets allocated (with @code{obstack_alloc}) at
-various times during a debugging session, but it is released all at
-once using the @code{obstack_free} function. The @code{obstack_free}
-function takes a pointer to where in the stack it must start the
-deletion from (much like the cleanup chains have a pointer to where to
-start the cleanups). Because of the stack like structure of the
-@code{obstacks}, this allows to free only a top portion of the
-obstack. There are a few instances in @value{GDBN} where such thing
-happens. Calls to @code{obstack_free} are done after some local data
-is allocated to the obstack. Only the local data is deleted from the
-obstack. Of course this assumes that nothing between the
-@code{obstack_alloc} and the @code{obstack_free} allocates anything
-else on the same obstack. For this reason it is best and safest to
-use temporary @code{obstacks}.
-
-Releasing the whole obstack is also not safe per se. It is safe only
-under the condition that we know the @code{obstacks} memory is no
-longer needed. In @value{GDBN} we get rid of the @code{obstacks} only
-when we get rid of the whole objfile(s), for instance upon reading a
-new symbol file.
-
-@section gnu-regex
-@cindex regular expressions library
-
-Regex conditionals.
-
-@table @code
-@item C_ALLOCA
-
-@item NFAILURES
-
-@item RE_NREGS
-
-@item SIGN_EXTEND_CHAR
-
-@item SWITCH_ENUM_BUG
-
-@item SYNTAX_TABLE
-
-@item Sword
-
-@item sparc
-@end table
-
-@section Array Containers
-@cindex Array Containers
-@cindex VEC
-
-Often it is necessary to manipulate a dynamic array of a set of
-objects. C forces some bookkeeping on this, which can get cumbersome
-and repetitive. The @file{vec.h} file contains macros for defining
-and using a typesafe vector type. The functions defined will be
-inlined when compiling, and so the abstraction cost should be zero.
-Domain checks are added to detect programming errors.
-
-An example use would be an array of symbols or section information.
-The array can be grown as symbols are read in (or preallocated), and
-the accessor macros provided keep care of all the necessary
-bookkeeping. Because the arrays are type safe, there is no danger of
-accidentally mixing up the contents. Think of these as C++ templates,
-but implemented in C.
-
-Because of the different behavior of structure objects, scalar objects
-and of pointers, there are three flavors of vector, one for each of
-these variants. Both the structure object and pointer variants pass
-pointers to objects around --- in the former case the pointers are
-stored into the vector and in the latter case the pointers are
-dereferenced and the objects copied into the vector. The scalar
-object variant is suitable for @code{int}-like objects, and the vector
-elements are returned by value.
-
-There are both @code{index} and @code{iterate} accessors. The iterator
-returns a boolean iteration condition and updates the iteration
-variable passed by reference. Because the iterator will be inlined,
-the address-of can be optimized away.
-
-The vectors are implemented using the trailing array idiom, thus they
-are not resizeable without changing the address of the vector object
-itself. This means you cannot have variables or fields of vector type
---- always use a pointer to a vector. The one exception is the final
-field of a structure, which could be a vector type. You will have to
-use the @code{embedded_size} & @code{embedded_init} calls to create
-such objects, and they will probably not be resizeable (so don't use
-the @dfn{safe} allocation variants). The trailing array idiom is used
-(rather than a pointer to an array of data), because, if we allow
-@code{NULL} to also represent an empty vector, empty vectors occupy
-minimal space in the structure containing them.
-
-Each operation that increases the number of active elements is
-available in @dfn{quick} and @dfn{safe} variants. The former presumes
-that there is sufficient allocated space for the operation to succeed
-(it dies if there is not). The latter will reallocate the vector, if
-needed. Reallocation causes an exponential increase in vector size.
-If you know you will be adding N elements, it would be more efficient
-to use the reserve operation before adding the elements with the
-@dfn{quick} operation. This will ensure there are at least as many
-elements as you ask for, it will exponentially increase if there are
-too few spare slots. If you want reserve a specific number of slots,
-but do not want the exponential increase (for instance, you know this
-is the last allocation), use a negative number for reservation. You
-can also create a vector of a specific size from the get go.
-
-You should prefer the push and pop operations, as they append and
-remove from the end of the vector. If you need to remove several items
-in one go, use the truncate operation. The insert and remove
-operations allow you to change elements in the middle of the vector.
-There are two remove operations, one which preserves the element
-ordering @code{ordered_remove}, and one which does not
-@code{unordered_remove}. The latter function copies the end element
-into the removed slot, rather than invoke a memmove operation. The
-@code{lower_bound} function will determine where to place an item in
-the array using insert that will maintain sorted order.
-
-If you need to directly manipulate a vector, then the @code{address}
-accessor will return the address of the start of the vector. Also the
-@code{space} predicate will tell you whether there is spare capacity in the
-vector. You will not normally need to use these two functions.
-
-Vector types are defined using a
-@code{DEF_VEC_@{O,P,I@}(@var{typename})} macro. Variables of vector
-type are declared using a @code{VEC(@var{typename})} macro. The
-characters @code{O}, @code{P} and @code{I} indicate whether
-@var{typename} is an object (@code{O}), pointer (@code{P}) or integral
-(@code{I}) type. Be careful to pick the correct one, as you'll get an
-awkward and inefficient API if you use the wrong one. There is a
-check, which results in a compile-time warning, for the @code{P} and
-@code{I} versions, but there is no check for the @code{O} versions, as
-that is not possible in plain C.
-
-An example of their use would be,
-
-@smallexample
-DEF_VEC_P(tree); // non-managed tree vector.
-
-struct my_struct @{
- VEC(tree) *v; // A (pointer to) a vector of tree pointers.
-@};
-
-struct my_struct *s;
-
-if (VEC_length(tree, s->v)) @{ we have some contents @}
-VEC_safe_push(tree, s->v, decl); // append some decl onto the end
-for (ix = 0; VEC_iterate(tree, s->v, ix, elt); ix++)
- @{ do something with elt @}
-
-@end smallexample
-
-The @file{vec.h} file provides details on how to invoke the various
-accessors provided. They are enumerated here:
-
-@table @code
-@item VEC_length
-Return the number of items in the array,
-
-@item VEC_empty
-Return true if the array has no elements.
-
-@item VEC_last
-@itemx VEC_index
-Return the last or arbitrary item in the array.
-
-@item VEC_iterate
-Access an array element and indicate whether the array has been
-traversed.
-
-@item VEC_alloc
-@itemx VEC_free
-Create and destroy an array.
-
-@item VEC_embedded_size
-@itemx VEC_embedded_init
-Helpers for embedding an array as the final element of another struct.
-
-@item VEC_copy
-Duplicate an array.
-
-@item VEC_space
-Return the amount of free space in an array.
-
-@item VEC_reserve
-Ensure a certain amount of free space.
-
-@item VEC_quick_push
-@itemx VEC_safe_push
-Append to an array, either assuming the space is available, or making
-sure that it is.
-
-@item VEC_pop
-Remove the last item from an array.
-
-@item VEC_truncate
-Remove several items from the end of an array.
-
-@item VEC_safe_grow
-Add several items to the end of an array.
-
-@item VEC_replace
-Overwrite an item in the array.
-
-@item VEC_quick_insert
-@itemx VEC_safe_insert
-Insert an item into the middle of the array. Either the space must
-already exist, or the space is created.
-
-@item VEC_ordered_remove
-@itemx VEC_unordered_remove
-Remove an item from the array, preserving order or not.
-
-@item VEC_block_remove
-Remove a set of items from the array.
-
-@item VEC_address
-Provide the address of the first element.
-
-@item VEC_lower_bound
-Binary search the array.
-
-@end table
-
-@section include
-
-@node Coding Standards
-
-@chapter Coding Standards
-@cindex coding standards
-
-@section @value{GDBN} C Coding Standards
-
-@value{GDBN} follows the GNU coding standards, as described in
-@file{etc/standards.texi}. This file is also available for anonymous
-FTP from GNU archive sites. @value{GDBN} takes a strict interpretation
-of the standard; in general, when the GNU standard recommends a practice
-but does not require it, @value{GDBN} requires it.
-
-@value{GDBN} follows an additional set of coding standards specific to
-@value{GDBN}, as described in the following sections.
-
-@subsection ISO C
-
-@value{GDBN} assumes an ISO/IEC 9899:1990 (a.k.a.@: ISO C90) compliant
-compiler.
-
-@value{GDBN} does not assume an ISO C or POSIX compliant C library.
-
-@subsection Formatting
-
-@cindex source code formatting
-The standard GNU recommendations for formatting must be followed
-strictly. Any @value{GDBN}-specific deviation from GNU
-recomendations is described below.
-
-A function declaration should not have its name in column zero. A
-function definition should have its name in column zero.
-
-@smallexample
-/* Declaration */
-static void foo (void);
-/* Definition */
-void
-foo (void)
-@{
-@}
-@end smallexample
-
-@emph{Pragmatics: This simplifies scripting. Function definitions can
-be found using @samp{^function-name}.}
-
-There must be a space between a function or macro name and the opening
-parenthesis of its argument list (except for macro definitions, as
-required by C). There must not be a space after an open paren/bracket
-or before a close paren/bracket.
-
-While additional whitespace is generally helpful for reading, do not use
-more than one blank line to separate blocks, and avoid adding whitespace
-after the end of a program line (as of 1/99, some 600 lines had
-whitespace after the semicolon). Excess whitespace causes difficulties
-for @code{diff} and @code{patch} utilities.
-
-Pointers are declared using the traditional K&R C style:
-
-@smallexample
-void *foo;
-@end smallexample
-
-@noindent
-and not:
-
-@smallexample
-void * foo;
-void* foo;
-@end smallexample
-
-In addition, whitespace around casts and unary operators should follow
-the following guidelines:
-
-@multitable @columnfractions .2 .2 .8
-@item Use... @tab ...instead of @tab
-
-@item @code{!x}
-@tab @code{! x}
-@item @code{~x}
-@tab @code{~ x}
-@item @code{-x}
-@tab @code{- x}
-@tab (unary minus)
-@item @code{(foo) x}
-@tab @code{(foo)x}
-@tab (cast)
-@item @code{*x}
-@tab @code{* x}
-@tab (pointer dereference)
-@end multitable
-
-Any two or more lines in code should be wrapped in braces, even if
-they are comments, as they look like separate statements:
-
-@smallexample
-if (i)
- @{
- /* Return success. */
- return 0;
- @}
-@end smallexample
-
-@noindent
-and not:
-
-@smallexample
-if (i)
- /* Return success. */
- return 0;
-@end smallexample
-
-@subsection Comments
-
-@cindex comment formatting
-The standard GNU requirements on comments must be followed strictly.
-
-Block comments must appear in the following form, with no @code{/*}- or
-@code{*/}-only lines, and no leading @code{*}:
-
-@smallexample
-/* Wait for control to return from inferior to debugger. If inferior
- gets a signal, we may decide to start it up again instead of
- returning. That is why there is a loop in this function. When
- this function actually returns it means the inferior should be left
- stopped and @value{GDBN} should read more commands. */
-@end smallexample
-
-(Note that this format is encouraged by Emacs; tabbing for a multi-line
-comment works correctly, and @kbd{M-q} fills the block consistently.)
-
-Put a blank line between the block comments preceding function or
-variable definitions, and the definition itself.
-
-In general, put function-body comments on lines by themselves, rather
-than trying to fit them into the 20 characters left at the end of a
-line, since either the comment or the code will inevitably get longer
-than will fit, and then somebody will have to move it anyhow.
-
-@subsection C Usage
-
-@cindex C data types
-Code must not depend on the sizes of C data types, the format of the
-host's floating point numbers, the alignment of anything, or the order
-of evaluation of expressions.
-
-@cindex function usage
-Use functions freely. There are only a handful of compute-bound areas
-in @value{GDBN} that might be affected by the overhead of a function
-call, mainly in symbol reading. Most of @value{GDBN}'s performance is
-limited by the target interface (whether serial line or system call).
-
-However, use functions with moderation. A thousand one-line functions
-are just as hard to understand as a single thousand-line function.
-
-@emph{Macros are bad, M'kay.}
-(But if you have to use a macro, make sure that the macro arguments are
-protected with parentheses.)
-
-@cindex types
-
-Declarations like @samp{struct foo *} should be used in preference to
-declarations like @samp{typedef struct foo @{ @dots{} @} *foo_ptr}.
-
-Zero constant (@code{0}) is not interchangeable with a null pointer
-constant (@code{NULL}) anywhere. @sc{gcc} does not give a warning for
-such interchange. Specifically:
-
-@multitable @columnfractions .2 .5
-@item incorrect
-@tab @code{if (pointervar) @{@}}
-@item incorrect
-@tab @code{if (!pointervar) @{@}}
-@item incorrect
-@tab @code{if (pointervar != 0) @{@}}
-@item incorrect
-@tab @code{if (pointervar == 0) @{@}}
-@item correct
-@tab @code{if (pointervar != NULL) @{@}}
-@item correct
-@tab @code{if (pointervar == NULL) @{@}}
-@end multitable
-
-@subsection Function Prototypes
-@cindex function prototypes
-
-Prototypes must be used when both @emph{declaring} and @emph{defining}
-a function. Prototypes for @value{GDBN} functions must include both the
-argument type and name, with the name matching that used in the actual
-function definition.
-
-All external functions should have a declaration in a header file that
-callers include, that declaration should use the @code{extern} modifier.
-The only exception concerns @code{_initialize_*} functions, which must
-be external so that @file{init.c} construction works, but shouldn't be
-visible to random source files.
-
-Where a source file needs a forward declaration of a static function,
-that declaration must appear in a block near the top of the source file.
-
-@subsection File Names
-
-Any file used when building the core of @value{GDBN} must be in lower
-case. Any file used when building the core of @value{GDBN} must be 8.3
-unique. These requirements apply to both source and generated files.
-
-@emph{Pragmatics: The core of @value{GDBN} must be buildable on many
-platforms including DJGPP and MacOS/HFS. Every time an unfriendly file
-is introduced to the build process both @file{Makefile.in} and
-@file{configure.in} need to be modified accordingly. Compare the
-convoluted conversion process needed to transform @file{COPYING} into
-@file{copying.c} with the conversion needed to transform
-@file{version.in} into @file{version.c}.}
-
-Any file non 8.3 compliant file (that is not used when building the core
-of @value{GDBN}) must be added to @file{gdb/config/djgpp/fnchange.lst}.
-
-@emph{Pragmatics: This is clearly a compromise.}
-
-When @value{GDBN} has a local version of a system header file (ex
-@file{string.h}) the file name based on the POSIX header prefixed with
-@file{gdb_} (@file{gdb_string.h}). These headers should be relatively
-independent: they should use only macros defined by @file{configure},
-the compiler, or the host; they should include only system headers; they
-should refer only to system types. They may be shared between multiple
-programs, e.g.@: @value{GDBN} and @sc{gdbserver}.
-
-For other files @samp{-} is used as the separator.
-
-@subsection Include Files
-
-A @file{.c} file should include @file{defs.h} first.
-
-A @file{.c} file should directly include the @code{.h} file of every
-declaration and/or definition it directly refers to. It cannot rely on
-indirect inclusion.
-
-A @file{.h} file should directly include the @code{.h} file of every
-declaration and/or definition it directly refers to. It cannot rely on
-indirect inclusion. Exception: The file @file{defs.h} does not need to
-be directly included.
-
-An external declaration should only appear in one include file.
-
-An external declaration should never appear in a @code{.c} file.
-Exception: a declaration for the @code{_initialize} function that
-pacifies @option{-Wmissing-declaration}.
-
-A @code{typedef} definition should only appear in one include file.
-
-An opaque @code{struct} declaration can appear in multiple @file{.h}
-files. Where possible, a @file{.h} file should use an opaque
-@code{struct} declaration instead of an include.
-
-All @file{.h} files should be wrapped in:
-
-@smallexample
-#ifndef INCLUDE_FILE_NAME_H
-#define INCLUDE_FILE_NAME_H
-header body
-#endif
-@end smallexample
-
-@section @value{GDBN} Python Coding Standards
-
-@value{GDBN} follows the published @code{Python} coding standards in
-@uref{http://www.python.org/dev/peps/pep-0008/, @code{PEP008}}.
-
-In addition, the guidelines in the
-@uref{http://google-styleguide.googlecode.com/svn/trunk/pyguide.html,
-Google Python Style Guide} are also followed where they do not
-conflict with @code{PEP008}.
-
-@subsection @value{GDBN}-specific exceptions
-
-There are a few exceptions to the published standards.
-They exist mainly for consistency with the @code{C} standards.
-
-@c It is expected that there are a few more exceptions,
-@c so we use itemize here.
-
-@itemize @bullet
-
-@item
-Use @code{FIXME} instead of @code{TODO}.
-
-@end itemize
-
-@node Misc Guidelines
-
-@chapter Misc Guidelines
-
-This chapter covers topics that are lower-level than the major
-algorithms of @value{GDBN}.
-
-@section Cleanups
-@cindex cleanups
-
-Cleanups are a structured way to deal with things that need to be done
-later.
-
-When your code does something (e.g., @code{xmalloc} some memory, or
-@code{open} a file) that needs to be undone later (e.g., @code{xfree}
-the memory or @code{close} the file), it can make a cleanup. The
-cleanup will be done at some future point: when the command is finished
-and control returns to the top level; when an error occurs and the stack
-is unwound; or when your code decides it's time to explicitly perform
-cleanups. Alternatively you can elect to discard the cleanups you
-created.
-
-Syntax:
-
-@table @code
-@item struct cleanup *@var{old_chain};
-Declare a variable which will hold a cleanup chain handle.
-
-@findex make_cleanup
-@item @var{old_chain} = make_cleanup (@var{function}, @var{arg});
-Make a cleanup which will cause @var{function} to be called with
-@var{arg} (a @code{char *}) later. The result, @var{old_chain}, is a
-handle that can later be passed to @code{do_cleanups} or
-@code{discard_cleanups}. Unless you are going to call
-@code{do_cleanups} or @code{discard_cleanups}, you can ignore the result
-from @code{make_cleanup}.
-
-@findex do_cleanups
-@item do_cleanups (@var{old_chain});
-Do all cleanups added to the chain since the corresponding
-@code{make_cleanup} call was made.
-
-@findex discard_cleanups
-@item discard_cleanups (@var{old_chain});
-Same as @code{do_cleanups} except that it just removes the cleanups from
-the chain and does not call the specified functions.
-@end table
-
-Cleanups are implemented as a chain. The handle returned by
-@code{make_cleanups} includes the cleanup passed to the call and any
-later cleanups appended to the chain (but not yet discarded or
-performed). E.g.:
-
-@smallexample
-make_cleanup (a, 0);
-@{
- struct cleanup *old = make_cleanup (b, 0);
- make_cleanup (c, 0)
- ...
- do_cleanups (old);
-@}
-@end smallexample
-
-@noindent
-will call @code{c()} and @code{b()} but will not call @code{a()}. The
-cleanup that calls @code{a()} will remain in the cleanup chain, and will
-be done later unless otherwise discarded.@refill
-
-Your function should explicitly do or discard the cleanups it creates.
-Failing to do this leads to non-deterministic behavior since the caller
-will arbitrarily do or discard your functions cleanups. This need leads
-to two common cleanup styles.
-
-The first style is try/finally. Before it exits, your code-block calls
-@code{do_cleanups} with the old cleanup chain and thus ensures that your
-code-block's cleanups are always performed. For instance, the following
-code-segment avoids a memory leak problem (even when @code{error} is
-called and a forced stack unwind occurs) by ensuring that the
-@code{xfree} will always be called:
-
-@smallexample
-struct cleanup *old = make_cleanup (null_cleanup, 0);
-data = xmalloc (sizeof blah);
-make_cleanup (xfree, data);
-... blah blah ...
-do_cleanups (old);
-@end smallexample
-
-The second style is try/except. Before it exits, your code-block calls
-@code{discard_cleanups} with the old cleanup chain and thus ensures that
-any created cleanups are not performed. For instance, the following
-code segment, ensures that the file will be closed but only if there is
-an error:
-
-@smallexample
-FILE *file = fopen ("afile", "r");
-struct cleanup *old = make_cleanup (close_file, file);
-... blah blah ...
-discard_cleanups (old);
-return file;
-@end smallexample
-
-Some functions, e.g., @code{fputs_filtered()} or @code{error()}, specify
-that they ``should not be called when cleanups are not in place''. This
-means that any actions you need to reverse in the case of an error or
-interruption must be on the cleanup chain before you call these
-functions, since they might never return to your code (they
-@samp{longjmp} instead).
-
-@section Per-architecture module data
-@cindex per-architecture module data
-@cindex multi-arch data
-@cindex data-pointer, per-architecture/per-module
-
-The multi-arch framework includes a mechanism for adding module
-specific per-architecture data-pointers to the @code{struct gdbarch}
-architecture object.
-
-A module registers one or more per-architecture data-pointers using:
-
-@deftypefn {Architecture Function} {struct gdbarch_data *} gdbarch_data_register_pre_init (gdbarch_data_pre_init_ftype *@var{pre_init})
-@var{pre_init} is used to, on-demand, allocate an initial value for a
-per-architecture data-pointer using the architecture's obstack (passed
-in as a parameter). Since @var{pre_init} can be called during
-architecture creation, it is not parameterized with the architecture.
-and must not call modules that use per-architecture data.
-@end deftypefn
-
-@deftypefn {Architecture Function} {struct gdbarch_data *} gdbarch_data_register_post_init (gdbarch_data_post_init_ftype *@var{post_init})
-@var{post_init} is used to obtain an initial value for a
-per-architecture data-pointer @emph{after}. Since @var{post_init} is
-always called after architecture creation, it both receives the fully
-initialized architecture and is free to call modules that use
-per-architecture data (care needs to be taken to ensure that those
-other modules do not try to call back to this module as that will
-create in cycles in the initialization call graph).
-@end deftypefn
-
-These functions return a @code{struct gdbarch_data} that is used to
-identify the per-architecture data-pointer added for that module.
-
-The per-architecture data-pointer is accessed using the function:
-
-@deftypefn {Architecture Function} {void *} gdbarch_data (struct gdbarch *@var{gdbarch}, struct gdbarch_data *@var{data_handle})
-Given the architecture @var{arch} and module data handle
-@var{data_handle} (returned by @code{gdbarch_data_register_pre_init}
-or @code{gdbarch_data_register_post_init}), this function returns the
-current value of the per-architecture data-pointer. If the data
-pointer is @code{NULL}, it is first initialized by calling the
-corresponding @var{pre_init} or @var{post_init} method.
-@end deftypefn
-
-The examples below assume the following definitions:
-
-@smallexample
-struct nozel @{ int total; @};
-static struct gdbarch_data *nozel_handle;
-@end smallexample
-
-A module can extend the architecture vector, adding additional
-per-architecture data, using the @var{pre_init} method. The module's
-per-architecture data is then initialized during architecture
-creation.
-
-In the below, the module's per-architecture @emph{nozel} is added. An
-architecture can specify its nozel by calling @code{set_gdbarch_nozel}
-from @code{gdbarch_init}.
-
-@smallexample
-static void *
-nozel_pre_init (struct obstack *obstack)
-@{
- struct nozel *data = OBSTACK_ZALLOC (obstack, struct nozel);
- return data;
-@}
-@end smallexample
-
-@smallexample
-extern void
-set_gdbarch_nozel (struct gdbarch *gdbarch, int total)
-@{
- struct nozel *data = gdbarch_data (gdbarch, nozel_handle);
- data->total = nozel;
-@}
-@end smallexample
-
-A module can on-demand create architecture dependent data structures
-using @code{post_init}.
-
-In the below, the nozel's total is computed on-demand by
-@code{nozel_post_init} using information obtained from the
-architecture.
-
-@smallexample
-static void *
-nozel_post_init (struct gdbarch *gdbarch)
-@{
- struct nozel *data = GDBARCH_OBSTACK_ZALLOC (gdbarch, struct nozel);
- nozel->total = gdbarch@dots{} (gdbarch);
- return data;
-@}
-@end smallexample
-
-@smallexample
-extern int
-nozel_total (struct gdbarch *gdbarch)
-@{
- struct nozel *data = gdbarch_data (gdbarch, nozel_handle);
- return data->total;
-@}
-@end smallexample
-
-@section Wrapping Output Lines
-@cindex line wrap in output
-
-@findex wrap_here
-Output that goes through @code{printf_filtered} or @code{fputs_filtered}
-or @code{fputs_demangled} needs only to have calls to @code{wrap_here}
-added in places that would be good breaking points. The utility
-routines will take care of actually wrapping if the line width is
-exceeded.
-
-The argument to @code{wrap_here} is an indentation string which is
-printed @emph{only} if the line breaks there. This argument is saved
-away and used later. It must remain valid until the next call to
-@code{wrap_here} or until a newline has been printed through the
-@code{*_filtered} functions. Don't pass in a local variable and then
-return!
-
-It is usually best to call @code{wrap_here} after printing a comma or
-space. If you call it before printing a space, make sure that your
-indentation properly accounts for the leading space that will print if
-the line wraps there.
-
-Any function or set of functions that produce filtered output must
-finish by printing a newline, to flush the wrap buffer, before switching
-to unfiltered (@code{printf}) output. Symbol reading routines that
-print warnings are a good example.
-
-@section Memory Management
-
-@value{GDBN} does not use the functions @code{malloc}, @code{realloc},
-@code{calloc}, @code{free} and @code{asprintf}.
-
-@value{GDBN} uses the functions @code{xmalloc}, @code{xrealloc} and
-@code{xcalloc} when allocating memory. Unlike @code{malloc} et.al.@:
-these functions do not return when the memory pool is empty. Instead,
-they unwind the stack using cleanups. These functions return
-@code{NULL} when requested to allocate a chunk of memory of size zero.
-
-@emph{Pragmatics: By using these functions, the need to check every
-memory allocation is removed. These functions provide portable
-behavior.}
-
-@value{GDBN} does not use the function @code{free}.
-
-@value{GDBN} uses the function @code{xfree} to return memory to the
-memory pool. Consistent with ISO-C, this function ignores a request to
-free a @code{NULL} pointer.
-
-@emph{Pragmatics: On some systems @code{free} fails when passed a
-@code{NULL} pointer.}
-
-@value{GDBN} can use the non-portable function @code{alloca} for the
-allocation of small temporary values (such as strings).
-
-@emph{Pragmatics: This function is very non-portable. Some systems
-restrict the memory being allocated to no more than a few kilobytes.}
-
-@value{GDBN} uses the string function @code{xstrdup} and the print
-function @code{xstrprintf}.
-
-@emph{Pragmatics: @code{asprintf} and @code{strdup} can fail. Print
-functions such as @code{sprintf} are very prone to buffer overflow
-errors.}
-
-
-@section Compiler Warnings
-@cindex compiler warnings
-
-With few exceptions, developers should avoid the configuration option
-@samp{--disable-werror} when building @value{GDBN}. The exceptions
-are listed in the file @file{gdb/MAINTAINERS}. The default, when
-building with @sc{gcc}, is @samp{--enable-werror}.
-
-This option causes @value{GDBN} (when built using GCC) to be compiled
-with a carefully selected list of compiler warning flags. Any warnings
-from those flags are treated as errors.
-
-The current list of warning flags includes:
-
-@table @samp
-@item -Wall
-Recommended @sc{gcc} warnings.
-
-@item -Wdeclaration-after-statement
-
-@sc{gcc} 3.x (and later) and @sc{c99} allow declarations mixed with
-code, but @sc{gcc} 2.x and @sc{c89} do not.
-
-@item -Wpointer-arith
-
-@item -Wformat-nonliteral
-Non-literal format strings, with a few exceptions, are bugs - they
-might contain unintended user-supplied format specifiers.
-Since @value{GDBN} uses the @code{format printf} attribute on all
-@code{printf} like functions this checks not just @code{printf} calls
-but also calls to functions such as @code{fprintf_unfiltered}.
-
-@item -Wpointer-sign
-This helps make sure @value{GDBN} code uses @code{gdb_byte} which is
-really @code{unsigned char} for raw bytes instead of @code{char},
-whose signedness is host-dependent. @sc{gcc} enables this with
-@code{-Wall} since version 4.0. We enable it explicitly too to be
-decoupled from future @sc{gcc} (or other compiler)'s defaults.
-
-@item -Wno-unused-parameter
-Due to the way that @value{GDBN} is implemented many functions have
-unused parameters. Consequently this warning is avoided. The macro
-@code{ATTRIBUTE_UNUSED} is not used as it leads to false negatives ---
-it is not an error to have @code{ATTRIBUTE_UNUSED} on a parameter that
-is being used.
-
-@item -Wno-unused
-@itemx -Wno-switch
-@itemx -Wno-char-subscripts
-These are warnings which might be useful for @value{GDBN}, but are
-currently too noisy to enable with @samp{-Werror}.
-
-@end table
-
-@section Internal Error Recovery
-
-During its execution, @value{GDBN} can encounter two types of errors.
-User errors and internal errors. User errors include not only a user
-entering an incorrect command but also problems arising from corrupt
-object files and system errors when interacting with the target.
-Internal errors include situations where @value{GDBN} has detected, at
-run time, a corrupt or erroneous situation.
-
-When reporting an internal error, @value{GDBN} uses
-@code{internal_error} and @code{gdb_assert}.
-
-@value{GDBN} must not call @code{abort} or @code{assert}.
-
-@emph{Pragmatics: There is no @code{internal_warning} function. Either
-the code detected a user error, recovered from it and issued a
-@code{warning} or the code failed to correctly recover from the user
-error and issued an @code{internal_error}.}
-
-@section Command Names
-
-GDB U/I commands are written @samp{foo-bar}, not @samp{foo_bar}.
-
-@section Clean Design and Portable Implementation
-
-@cindex design
-In addition to getting the syntax right, there's the little question of
-semantics. Some things are done in certain ways in @value{GDBN} because long
-experience has shown that the more obvious ways caused various kinds of
-trouble.
-
-@cindex assumptions about targets
-You can't assume the byte order of anything that comes from a target
-(including @var{value}s, object files, and instructions). Such things
-must be byte-swapped using @code{SWAP_TARGET_AND_HOST} in
-@value{GDBN}, or one of the swap routines defined in @file{bfd.h},
-such as @code{bfd_get_32}.
-
-You can't assume that you know what interface is being used to talk to
-the target system. All references to the target must go through the
-current @code{target_ops} vector.
-
-You can't assume that the host and target machines are the same machine
-(except in the ``native'' support modules). In particular, you can't
-assume that the target machine's header files will be available on the
-host machine. Target code must bring along its own header files --
-written from scratch or explicitly donated by their owner, to avoid
-copyright problems.
-
-@cindex portability
-Insertion of new @code{#ifdef}'s will be frowned upon. It's much better
-to write the code portably than to conditionalize it for various
-systems.
-
-@cindex system dependencies
-New @code{#ifdef}'s which test for specific compilers or manufacturers
-or operating systems are unacceptable. All @code{#ifdef}'s should test
-for features. The information about which configurations contain which
-features should be segregated into the configuration files. Experience
-has proven far too often that a feature unique to one particular system
-often creeps into other systems; and that a conditional based on some
-predefined macro for your current system will become worthless over
-time, as new versions of your system come out that behave differently
-with regard to this feature.
-
-Adding code that handles specific architectures, operating systems,
-target interfaces, or hosts, is not acceptable in generic code.
-
-@cindex portable file name handling
-@cindex file names, portability
-One particularly notorious area where system dependencies tend to
-creep in is handling of file names. The mainline @value{GDBN} code
-assumes Posix semantics of file names: absolute file names begin with
-a forward slash @file{/}, slashes are used to separate leading
-directories, case-sensitive file names. These assumptions are not
-necessarily true on non-Posix systems such as MS-Windows. To avoid
-system-dependent code where you need to take apart or construct a file
-name, use the following portable macros:
-
-@table @code
-@findex HAVE_DOS_BASED_FILE_SYSTEM
-@item HAVE_DOS_BASED_FILE_SYSTEM
-This preprocessing symbol is defined to a non-zero value on hosts
-whose filesystems belong to the MS-DOS/MS-Windows family. Use this
-symbol to write conditional code which should only be compiled for
-such hosts.
-
-@findex IS_DIR_SEPARATOR
-@item IS_DIR_SEPARATOR (@var{c})
-Evaluates to a non-zero value if @var{c} is a directory separator
-character. On Unix and GNU/Linux systems, only a slash @file{/} is
-such a character, but on Windows, both @file{/} and @file{\} will
-pass.
-
-@findex IS_ABSOLUTE_PATH
-@item IS_ABSOLUTE_PATH (@var{file})
-Evaluates to a non-zero value if @var{file} is an absolute file name.
-For Unix and GNU/Linux hosts, a name which begins with a slash
-@file{/} is absolute. On DOS and Windows, @file{d:/foo} and
-@file{x:\bar} are also absolute file names.
-
-@findex FILENAME_CMP
-@item FILENAME_CMP (@var{f1}, @var{f2})
-Calls a function which compares file names @var{f1} and @var{f2} as
-appropriate for the underlying host filesystem. For Posix systems,
-this simply calls @code{strcmp}; on case-insensitive filesystems it
-will call @code{strcasecmp} instead.
-
-@findex DIRNAME_SEPARATOR
-@item DIRNAME_SEPARATOR
-Evaluates to a character which separates directories in
-@code{PATH}-style lists, typically held in environment variables.
-This character is @samp{:} on Unix, @samp{;} on DOS and Windows.
-
-@findex SLASH_STRING
-@item SLASH_STRING
-This evaluates to a constant string you should use to produce an
-absolute filename from leading directories and the file's basename.
-@code{SLASH_STRING} is @code{"/"} on most systems, but might be
-@code{"\\"} for some Windows-based ports.
-@end table
-
-In addition to using these macros, be sure to use portable library
-functions whenever possible. For example, to extract a directory or a
-basename part from a file name, use the @code{dirname} and
-@code{basename} library functions (available in @code{libiberty} for
-platforms which don't provide them), instead of searching for a slash
-with @code{strrchr}.
-
-Another way to generalize @value{GDBN} along a particular interface is with an
-attribute struct. For example, @value{GDBN} has been generalized to handle
-multiple kinds of remote interfaces---not by @code{#ifdef}s everywhere, but
-by defining the @code{target_ops} structure and having a current target (as
-well as a stack of targets below it, for memory references). Whenever
-something needs to be done that depends on which remote interface we are
-using, a flag in the current target_ops structure is tested (e.g.,
-@code{target_has_stack}), or a function is called through a pointer in the
-current target_ops structure. In this way, when a new remote interface
-is added, only one module needs to be touched---the one that actually
-implements the new remote interface. Other examples of
-attribute-structs are BFD access to multiple kinds of object file
-formats, or @value{GDBN}'s access to multiple source languages.
-
-Please avoid duplicating code. For example, in @value{GDBN} 3.x all
-the code interfacing between @code{ptrace} and the rest of
-@value{GDBN} was duplicated in @file{*-dep.c}, and so changing
-something was very painful. In @value{GDBN} 4.x, these have all been
-consolidated into @file{infptrace.c}. @file{infptrace.c} can deal
-with variations between systems the same way any system-independent
-file would (hooks, @code{#if defined}, etc.), and machines which are
-radically different don't need to use @file{infptrace.c} at all.
-
-All debugging code must be controllable using the @samp{set debug
-@var{module}} command. Do not use @code{printf} to print trace
-messages. Use @code{fprintf_unfiltered(gdb_stdlog, ...}. Do not use
-@code{#ifdef DEBUG}.
-
-@node Porting GDB
-
-@chapter Porting @value{GDBN}
-@cindex porting to new machines
-
-Most of the work in making @value{GDBN} compile on a new machine is in
-specifying the configuration of the machine. Porting a new
-architecture to @value{GDBN} can be broken into a number of steps.
-
-@itemize @bullet
-
-@item
-Ensure a @sc{bfd} exists for executables of the target architecture in
-the @file{bfd} directory. If one does not exist, create one by
-modifying an existing similar one.
-
-@item
-Implement a disassembler for the target architecture in the @file{opcodes}
-directory.
-
-@item
-Define the target architecture in the @file{gdb} directory
-(@pxref{Adding a New Target, , Adding a New Target}). Add the pattern
-for the new target to @file{configure.tgt} with the names of the files
-that contain the code. By convention the target architecture
-definition for an architecture @var{arch} is placed in
-@file{@var{arch}-tdep.c}.
-
-Within @file{@var{arch}-tdep.c} define the function
-@code{_initialize_@var{arch}_tdep} which calls
-@code{gdbarch_register} to create the new @code{@w{struct
-gdbarch}} for the architecture.
-
-@item
-If a new remote target is needed, consider adding a new remote target
-by defining a function
-@code{_initialize_remote_@var{arch}}. However if at all possible
-use the @value{GDBN} @emph{Remote Serial Protocol} for this and implement
-the server side protocol independently with the target.
-
-@item
-If desired implement a simulator in the @file{sim} directory. This
-should create the library @file{libsim.a} implementing the interface
-in @file{remote-sim.h} (found in the @file{include} directory).
-
-@item
-Build and test. If desired, lobby the @sc{gdb} steering group to
-have the new port included in the main distribution!
-
-@item
-Add a description of the new architecture to the main @value{GDBN} user
-guide (@pxref{Configuration Specific Information, , Configuration
-Specific Information, gdb, Debugging with @value{GDBN}}).
-
-@end itemize
-
-@node Versions and Branches
-@chapter Versions and Branches
-
-@section Versions
-
-@value{GDBN}'s version is determined by the file
-@file{gdb/version.in} and takes one of the following forms:
-
-@table @asis
-@item @var{major}.@var{minor}
-@itemx @var{major}.@var{minor}.@var{patchlevel}
-an official release (e.g., 6.2 or 6.2.1)
-@item @var{major}.@var{minor}.@var{patchlevel}.DATE
-a snapshot; the string @samp{DATE} is replace with the date from
-@file{bfd/version.h}
-@item @var{major}.@var{minor}.@var{patchlevel}.DATE-cvs
-a @sc{cvs} check out; the string @samp{DATE} is replace with the date from
-@file{bfd/version.h}
-@item @var{major}.@var{minor}.@var{patchlevel}.DATE (@var{vendor})
-a vendor specific release of @value{GDBN}, that while based on@*
-@var{major}.@var{minor}.@var{patchlevel}.DATE,
-may include additional changes
-@end table
-
-@value{GDBN}'s mainline uses the @var{major} and @var{minor} version
-numbers from the most recent release branch, with a @var{patchlevel}
-of 50. At the time each new release branch is created, the mainline's
-@var{major} and @var{minor} version numbers are updated.
-
-@value{GDBN}'s release branch is similar. When the branch is cut, the
-@var{patchlevel} is changed from 50 to 90. As draft releases are
-drawn from the branch, the @var{patchlevel} is incremented. Once the
-first release (@var{major}.@var{minor}) has been made, the
-@var{patchlevel} is set to 0 and updates have an incremented
-@var{patchlevel}.
-
-For snapshots, and @sc{cvs} check outs, it is also possible to
-identify the @sc{cvs} origin:
-
-@table @asis
-@item @var{major}.@var{minor}.50.@var{YYYY}@var{MM}@var{DD}
-drawn from the @sc{head} of mainline @sc{cvs} (e.g., 6.1.50.20020302)
-@item @var{major}.@var{minor}.90.@var{YYYY}@var{MM}@var{DD}
-@itemx @var{major}.@var{minor}.91.@var{YYYY}@var{MM}@var{DD} @dots{}
-drawn from a release branch prior to the release (e.g.,
-6.1.90.20020304)
-@item @var{major}.@var{minor}.0.@var{YYYY}@var{MM}@var{DD}
-@itemx @var{major}.@var{minor}.1.@var{YYYY}@var{MM}@var{DD} @dots{}
-drawn from a release branch after the release (e.g., 6.2.0.20020308)
-@end table
-
-If the previous @value{GDBN} version is 6.1 and the current version is
-6.2, then, substituting 6 for @var{major} and 1 or 2 for @var{minor},
-here's an illustration of a typical sequence:
-
-@smallexample
- <HEAD>
- |
-6.1.50.20020302-cvs
- |
- +--------------------------.
- | <gdb_6_2-branch>
- | |
-6.2.50.20020303-cvs 6.1.90 (draft #1)
- | |
-6.2.50.20020304-cvs 6.1.90.20020304-cvs
- | |
-6.2.50.20020305-cvs 6.1.91 (draft #2)
- | |
-6.2.50.20020306-cvs 6.1.91.20020306-cvs
- | |
-6.2.50.20020307-cvs 6.2 (release)
- | |
-6.2.50.20020308-cvs 6.2.0.20020308-cvs
- | |
-6.2.50.20020309-cvs 6.2.1 (update)
- | |
-6.2.50.20020310-cvs <branch closed>
- |
-6.2.50.20020311-cvs
- |
- +--------------------------.
- | <gdb_6_3-branch>
- | |
-6.3.50.20020312-cvs 6.2.90 (draft #1)
- | |
-@end smallexample
-
-@section Release Branches
-@cindex Release Branches
-
-@value{GDBN} draws a release series (6.2, 6.2.1, @dots{}) from a
-single release branch, and identifies that branch using the @sc{cvs}
-branch tags:
-
-@smallexample
-gdb_@var{major}_@var{minor}-@var{YYYY}@var{MM}@var{DD}-branchpoint
-gdb_@var{major}_@var{minor}-branch
-gdb_@var{major}_@var{minor}-@var{YYYY}@var{MM}@var{DD}-release
-@end smallexample
-
-@emph{Pragmatics: To help identify the date at which a branch or
-release is made, both the branchpoint and release tags include the
-date that they are cut (@var{YYYY}@var{MM}@var{DD}) in the tag. The
-branch tag, denoting the head of the branch, does not need this.}
-
-@section Vendor Branches
-@cindex vendor branches
-
-To avoid version conflicts, vendors are expected to modify the file
-@file{gdb/version.in} to include a vendor unique alphabetic identifier
-(an official @value{GDBN} release never uses alphabetic characters in
-its version identifier). E.g., @samp{6.2widgit2}, or @samp{6.2 (Widgit
-Inc Patch 2)}.
-
-@section Experimental Branches
-@cindex experimental branches
-
-@subsection Guidelines
-
-@value{GDBN} permits the creation of branches, cut from the @sc{cvs}
-repository, for experimental development. Branches make it possible
-for developers to share preliminary work, and maintainers to examine
-significant new developments.
-
-The following are a set of guidelines for creating such branches:
-
-@table @emph
-
-@item a branch has an owner
-The owner can set further policy for a branch, but may not change the
-ground rules. In particular, they can set a policy for commits (be it
-adding more reviewers or deciding who can commit).
-
-@item all commits are posted
-All changes committed to a branch shall also be posted to
-@email{gdb-patches@@sourceware.org, the @value{GDBN} patches
-mailing list}. While commentary on such changes are encouraged, people
-should remember that the changes only apply to a branch.
-
-@item all commits are covered by an assignment
-This ensures that all changes belong to the Free Software Foundation,
-and avoids the possibility that the branch may become contaminated.
-
-@item a branch is focused
-A focused branch has a single objective or goal, and does not contain
-unnecessary or irrelevant changes. Cleanups, where identified, being
-be pushed into the mainline as soon as possible.
-
-@item a branch tracks mainline
-This keeps the level of divergence under control. It also keeps the
-pressure on developers to push cleanups and other stuff into the
-mainline.
-
-@item a branch shall contain the entire @value{GDBN} module
-The @value{GDBN} module @code{gdb} should be specified when creating a
-branch (branches of individual files should be avoided). @xref{Tags}.
-
-@item a branch shall be branded using @file{version.in}
-The file @file{gdb/version.in} shall be modified so that it identifies
-the branch @var{owner} and branch @var{name}, e.g.,
-@samp{6.2.50.20030303_owner_name} or @samp{6.2 (Owner Name)}.
-
-@end table
-
-@subsection Tags
-@anchor{Tags}
-
-To simplify the identification of @value{GDBN} branches, the following
-branch tagging convention is strongly recommended:
-
-@table @code
-
-@item @var{owner}_@var{name}-@var{YYYYMMDD}-branchpoint
-@itemx @var{owner}_@var{name}-@var{YYYYMMDD}-branch
-The branch point and corresponding branch tag. @var{YYYYMMDD} is the
-date that the branch was created. A branch is created using the
-sequence: @anchor{experimental branch tags}
-@smallexample
-cvs rtag @var{owner}_@var{name}-@var{YYYYMMDD}-branchpoint gdb
-cvs rtag -b -r @var{owner}_@var{name}-@var{YYYYMMDD}-branchpoint \
- @var{owner}_@var{name}-@var{YYYYMMDD}-branch gdb
-@end smallexample
-
-@item @var{owner}_@var{name}-@var{yyyymmdd}-mergepoint
-The tagged point, on the mainline, that was used when merging the branch
-on @var{yyyymmdd}. To merge in all changes since the branch was cut,
-use a command sequence like:
-@smallexample
-cvs rtag @var{owner}_@var{name}-@var{yyyymmdd}-mergepoint gdb
-cvs update \
- -j@var{owner}_@var{name}-@var{YYYYMMDD}-branchpoint
- -j@var{owner}_@var{name}-@var{yyyymmdd}-mergepoint
-@end smallexample
-@noindent
-Similar sequences can be used to just merge in changes since the last
-merge.
-
-@end table
-
-@noindent
-For further information on @sc{cvs}, see
-@uref{http://www.gnu.org/software/cvs/, Concurrent Versions System}.
-
-@node Start of New Year Procedure
-@chapter Start of New Year Procedure
-@cindex new year procedure
-
-At the start of each new year, the following actions should be performed:
-
-@itemize @bullet
-@item
-Rotate the ChangeLog file
-
-The current @file{ChangeLog} file should be renamed into
-@file{ChangeLog-YYYY} where YYYY is the year that has just passed.
-A new @file{ChangeLog} file should be created, and its contents should
-contain a reference to the previous ChangeLog. The following should
-also be preserved at the end of the new ChangeLog, in order to provide
-the appropriate settings when editing this file with Emacs:
-@smallexample
-Local Variables:
-mode: change-log
-left-margin: 8
-fill-column: 74
-version-control: never
-coding: utf-8
-End:
-@end smallexample
-
-@item
-Add an entry for the newly created ChangeLog file (@file{ChangeLog-YYYY})
-in @file{gdb/config/djgpp/fnchange.lst}.
-
-@item
-Update the copyright year in the startup message
-
-Update the copyright year in:
-@itemize @bullet
- @item
- file @file{top.c}, function @code{print_gdb_version}
- @item
- file @file{gdbserver/server.c}, function @code{gdbserver_version}
- @item
- file @file{gdbserver/gdbreplay.c}, function @code{gdbreplay_version}
-@end itemize
-
-@item
-Run the @file{copyright.py} Python script to add the new year in the copyright
-notices of most source files. This script has been tested with Python
-2.6 and 2.7.
-
-@end itemize
-
-@node Releasing GDB
-
-@chapter Releasing @value{GDBN}
-@cindex making a new release of gdb
-
-@section Branch Commit Policy
-
-The branch commit policy is pretty slack. @value{GDBN} releases 5.0,
-5.1 and 5.2 all used the below:
-
-@itemize @bullet
-@item
-The @file{gdb/MAINTAINERS} file still holds.
-@item
-Don't fix something on the branch unless/until it is also fixed in the
-trunk. If this isn't possible, mentioning it in the @file{gdb/PROBLEMS}
-file is better than committing a hack.
-@item
-When considering a patch for the branch, suggested criteria include:
-Does it fix a build? Does it fix the sequence @kbd{break main; run}
-when debugging a static binary?
-@item
-The further a change is from the core of @value{GDBN}, the less likely
-the change will worry anyone (e.g., target specific code).
-@item
-Only post a proposal to change the core of @value{GDBN} after you've
-sent individual bribes to all the people listed in the
-@file{MAINTAINERS} file @t{;-)}
-@end itemize
-
-@emph{Pragmatics: Provided updates are restricted to non-core
-functionality there is little chance that a broken change will be fatal.
-This means that changes such as adding a new architectures or (within
-reason) support for a new host are considered acceptable.}
-
-
-@section Obsoleting code
-
-Before anything else, poke the other developers (and around the source
-code) to see if there is anything that can be removed from @value{GDBN}
-(an old target, an unused file).
-
-Obsolete code is identified by adding an @code{OBSOLETE} prefix to every
-line. Doing this means that it is easy to identify something that has
-been obsoleted when greping through the sources.
-
-The process is done in stages --- this is mainly to ensure that the
-wider @value{GDBN} community has a reasonable opportunity to respond.
-Remember, everything on the Internet takes a week.
-
-@enumerate
-@item
-Post the proposal on @email{gdb@@sourceware.org, the GDB mailing
-list} Creating a bug report to track the task's state, is also highly
-recommended.
-@item
-Wait a week or so.
-@item
-Post the proposal on @email{gdb-announce@@sourceware.org, the GDB
-Announcement mailing list}.
-@item
-Wait a week or so.
-@item
-Go through and edit all relevant files and lines so that they are
-prefixed with the word @code{OBSOLETE}.
-@item
-Wait until the next GDB version, containing this obsolete code, has been
-released.
-@item
-Remove the obsolete code.
-@end enumerate
-
-@noindent
-@emph{Maintainer note: While removing old code is regrettable it is
-hopefully better for @value{GDBN}'s long term development. Firstly it
-helps the developers by removing code that is either no longer relevant
-or simply wrong. Secondly since it removes any history associated with
-the file (effectively clearing the slate) the developer has a much freer
-hand when it comes to fixing broken files.}
-
-
-
-@section Before the Branch
-
-The most important objective at this stage is to find and fix simple
-changes that become a pain to track once the branch is created. For
-instance, configuration problems that stop @value{GDBN} from even
-building. If you can't get the problem fixed, document it in the
-@file{gdb/PROBLEMS} file.
-
-@subheading Prompt for @file{gdb/NEWS}
-
-People always forget. Send a post reminding them but also if you know
-something interesting happened add it yourself. The @code{schedule}
-script will mention this in its e-mail.
-
-@subheading Review @file{gdb/README}
-
-Grab one of the nightly snapshots and then walk through the
-@file{gdb/README} looking for anything that can be improved. The
-@code{schedule} script will mention this in its e-mail.
-
-@subheading Refresh any imported files.
-
-A number of files are taken from external repositories. They include:
-
-@itemize @bullet
-@item
-@file{texinfo/texinfo.tex}
-@item
-@file{config.guess} et.@: al.@: (see the top-level @file{MAINTAINERS}
-file)
-@item
-@file{etc/standards.texi}, @file{etc/make-stds.texi}
-@end itemize
-
-@subheading Check the ARI
-
-@uref{http://sourceware.org/gdb/ari,,A.R.I.} is an @code{awk} script
-(Awk Regression Index ;-) that checks for a number of errors and coding
-conventions. The checks include things like using @code{malloc} instead
-of @code{xmalloc} and file naming problems. There shouldn't be any
-regressions.
-
-@subsection Review the bug data base
-
-Close anything obviously fixed.
-
-@subsection Check all cross targets build
-
-The targets are listed in @file{gdb/MAINTAINERS}.
-
-
-@section Cut the Branch
-
-@subheading Create the branch
-
-@smallexample
-$ u=5.1
-$ v=5.2
-$ V=`echo $v | sed 's/\./_/g'`
-$ D=`date -u +%Y-%m-%d`
-$ echo $u $V $D
-5.1 5_2 2002-03-03
-$ echo cvs -f -d :ext:sourceware.org:/cvs/src rtag \
--D $D-gmt gdb_$V-$D-branchpoint insight
-cvs -f -d :ext:sourceware.org:/cvs/src rtag
--D 2002-03-03-gmt gdb_5_2-2002-03-03-branchpoint insight
-$ ^echo ^^
-...
-$ echo cvs -f -d :ext:sourceware.org:/cvs/src rtag \
--b -r gdb_$V-$D-branchpoint gdb_$V-branch insight
-cvs -f -d :ext:sourceware.org:/cvs/src rtag \
--b -r gdb_5_2-2002-03-03-branchpoint gdb_5_2-branch insight
-$ ^echo ^^
-...
-$
-@end smallexample
-
-@itemize @bullet
-@item
-By using @kbd{-D YYYY-MM-DD-gmt}, the branch is forced to an exact
-date/time.
-@item
-The trunk is first tagged so that the branch point can easily be found.
-@item
-Insight, which includes @value{GDBN}, is tagged at the same time.
-@item
-@file{version.in} gets bumped to avoid version number conflicts.
-@item
-The reading of @file{.cvsrc} is disabled using @file{-f}.
-@end itemize
-
-@subheading Update @file{version.in}
-
-@smallexample
-$ u=5.1
-$ v=5.2
-$ V=`echo $v | sed 's/\./_/g'`
-$ echo $u $v$V
-5.1 5_2
-$ cd /tmp
-$ echo cvs -f -d :ext:sourceware.org:/cvs/src co \
--r gdb_$V-branch src/gdb/version.in
-cvs -f -d :ext:sourceware.org:/cvs/src co
- -r gdb_5_2-branch src/gdb/version.in
-$ ^echo ^^
-U src/gdb/version.in
-$ cd src/gdb
-$ echo $u.90-DATE-cvs > version.in
-$ cat version.in
-5.1.90-DATE-cvs
-$ cvs -f commit version.in
-@end smallexample
-
-@itemize @bullet
-@item
-The string @samp{DATE} is used to substitute the checkout date at
-build time; the date comes from @file{bfd/version.h}.
-@item
-@file{.90} and the previous branch version are used as fairly arbitrary
-initial branch version number.
-@end itemize
-
-
-@subheading Update the web and news pages
-
-Something?
-
-@subheading Tweak cron to track the new branch
-
-The file @file{gdbadmin/cron/crontab} contains gdbadmin's cron table.
-This file needs to be updated so that:
-
-@itemize @bullet
-@item
-A daily timestamp is added to the file @file{bfd/version.h}.
-@item
-The new branch is included in the snapshot process.
-@end itemize
-
-@noindent
-See the file @file{gdbadmin/cron/README} for how to install the updated
-cron table.
-
-The file @file{gdbadmin/ss/README} should also be reviewed to reflect
-any changes. That file is copied to both the branch/ and current/
-snapshot directories.
-
-
-@subheading Update the NEWS and README files
-
-The @file{NEWS} file needs to be updated so that on the branch it refers
-to @emph{changes in the current release} while on the trunk it also
-refers to @emph{changes since the current release}.
-
-The @file{README} file needs to be updated so that it refers to the
-current release.
-
-@subheading Post the branch info
-
-Send an announcement to the mailing lists:
-
-@itemize @bullet
-@item
-@email{gdb-announce@@sourceware.org, GDB Announcement mailing list}
-@item
-@email{gdb@@sourceware.org, GDB Discussion mailing list} and
-@email{gdb-testers@@sourceware.org, GDB Testers mailing list}
-@end itemize
-
-@emph{Pragmatics: The branch creation is sent to the announce list to
-ensure that people people not subscribed to the higher volume discussion
-list are alerted.}
-
-The announcement should include:
-
-@itemize @bullet
-@item
-The branch tag.
-@item
-How to check out the branch using CVS.
-@item
-The date/number of weeks until the release.
-@item
-The branch commit policy still holds.
-@end itemize
-
-@section Stabilize the branch
-
-Something goes here.
-
-@section Create a Release
-
-The process of creating and then making available a release is broken
-down into a number of stages. The first part addresses the technical
-process of creating a releasable tar ball. The later stages address the
-process of releasing that tar ball.
-
-When making a release candidate just the first section is needed.
-
-@subsection Create a release candidate
-
-The objective at this stage is to create a set of tar balls that can be
-made available as a formal release (or as a less formal release
-candidate).
-
-@subsubheading Freeze the branch
-
-Send out an e-mail notifying everyone that the branch is frozen to
-@email{gdb-patches@@sourceware.org}.
-
-@subsubheading Establish a few defaults.
-
-@smallexample
-$ b=gdb_5_2-branch
-$ v=5.2
-$ t=/sourceware/snapshot-tmp/gdbadmin-tmp
-$ echo $t/$b/$v
-/sourceware/snapshot-tmp/gdbadmin-tmp/gdb_5_2-branch/5.2
-$ mkdir -p $t/$b/$v
-$ cd $t/$b/$v
-$ pwd
-/sourceware/snapshot-tmp/gdbadmin-tmp/gdb_5_2-branch/5.2
-$ which autoconf
-/home/gdbadmin/bin/autoconf
-$
-@end smallexample
-
-@noindent
-Notes:
-
-@itemize @bullet
-@item
-Check the @code{autoconf} version carefully. You want to be using the
-version documented in the toplevel @file{README-maintainer-mode} file.
-It is very unlikely that the version of @code{autoconf} installed in
-system directories (e.g., @file{/usr/bin/autoconf}) is correct.
-@end itemize
-
-@subsubheading Check out the relevant modules:
-
-@smallexample
-$ for m in gdb insight
-do
-( mkdir -p $m && cd $m && cvs -q -f -d /cvs/src co -P -r $b $m )
-done
-$
-@end smallexample
-
-@noindent
-Note:
-
-@itemize @bullet
-@item
-The reading of @file{.cvsrc} is disabled (@file{-f}) so that there isn't
-any confusion between what is written here and what your local
-@code{cvs} really does.
-@end itemize
-
-@subsubheading Update relevant files.
-
-@table @file
-
-@item gdb/NEWS
-
-Major releases get their comments added as part of the mainline. Minor
-releases should probably mention any significant bugs that were fixed.
-
-Don't forget to include the @file{ChangeLog} entry.
-
-@smallexample
-$ emacs gdb/src/gdb/NEWS
-...
-c-x 4 a
-...
-c-x c-s c-x c-c
-$ cp gdb/src/gdb/NEWS insight/src/gdb/NEWS
-$ cp gdb/src/gdb/ChangeLog insight/src/gdb/ChangeLog
-@end smallexample
-
-@item gdb/README
-
-You'll need to update:
-
-@itemize @bullet
-@item
-The version.
-@item
-The update date.
-@item
-Who did it.
-@end itemize
-
-@smallexample
-$ emacs gdb/src/gdb/README
-...
-c-x 4 a
-...
-c-x c-s c-x c-c
-$ cp gdb/src/gdb/README insight/src/gdb/README
-$ cp gdb/src/gdb/ChangeLog insight/src/gdb/ChangeLog
-@end smallexample
-
-@emph{Maintainer note: Hopefully the @file{README} file was reviewed
-before the initial branch was cut so just a simple substitute is needed
-to get it updated.}
-
-@emph{Maintainer note: Other projects generate @file{README} and
-@file{INSTALL} from the core documentation. This might be worth
-pursuing.}
-
-@item gdb/version.in
-
-@smallexample
-$ echo $v > gdb/src/gdb/version.in
-$ cat gdb/src/gdb/version.in
-5.2
-$ emacs gdb/src/gdb/version.in
-...
-c-x 4 a
-... Bump to version ...
-c-x c-s c-x c-c
-$ cp gdb/src/gdb/version.in insight/src/gdb/version.in
-$ cp gdb/src/gdb/ChangeLog insight/src/gdb/ChangeLog
-@end smallexample
-
-@end table
-
-@subsubheading Do the dirty work
-
-This is identical to the process used to create the daily snapshot.
-
-@smallexample
-$ for m in gdb insight
-do
-( cd $m/src && gmake -f src-release $m.tar )
-done
-@end smallexample
-
-If the top level source directory does not have @file{src-release}
-(@value{GDBN} version 5.3.1 or earlier), try these commands instead:
-
-@smallexample
-$ for m in gdb insight
-do
-( cd $m/src && gmake -f Makefile.in $m.tar )
-done
-@end smallexample
-
-@subsubheading Check the source files
-
-You're looking for files that have mysteriously disappeared.
-@kbd{distclean} has the habit of deleting files it shouldn't.
-
-@smallexample
-$ ( cd gdb/src && cvs -f -q -n update )
-M djunpack.bat
-? gdb-5.1.91.tar
-? proto-toplev
-@dots{} lots of generated files @dots{}
-M gdb/ChangeLog
-M gdb/NEWS
-M gdb/README
-@dots{} lots of generated files @dots{}
-$
-@end smallexample
-
-@noindent
-@emph{Don't worry about the @file{gdb.info-??} or
-@file{gdb/p-exp.tab.c}. They were generated (and yes @file{gdb.info-1}
-was also generated only something strange with CVS means that they
-didn't get suppressed). Fixing it would be nice though.}
-
-@subsubheading Create compressed versions of the release
-
-@smallexample
-$ cp */src/*.tar .
-$ cp */src/*.bz2 .
-$ ls -F
-gdb/ gdb-5.2.tar insight/ insight-5.2.tar
-$ for m in gdb insight
-do
-bzip2 -v -9 -c $m-$v.tar > $m-$v.tar.bz2
-gzip -v -9 -c $m-$v.tar > $m-$v.tar.gz
-done
-$
-@end smallexample
-
-@noindent
-Note:
-
-@itemize @bullet
-@item
-A pipe such as @kbd{bunzip2 < xxx.bz2 | gzip -9 > xxx.gz} is not since,
-in that mode, @code{gzip} does not know the name of the file and, hence,
-can not include it in the compressed file. This is also why the release
-process runs @code{tar} and @code{bzip2} as separate passes.
-@end itemize
-
-@subsection Sanity check the tar ball
-
-Pick a popular machine (Solaris/PPC?) and try the build on that.
-
-@smallexample
-$ bunzip2 < gdb-5.2.tar.bz2 | tar xpf -
-$ cd gdb-5.2
-$ ./configure
-$ make
-@dots{}
-$ ./gdb/gdb ./gdb/gdb
-GNU gdb 5.2
-@dots{}
-(gdb) b main
-Breakpoint 1 at 0x80732bc: file main.c, line 734.
-(gdb) run
-Starting program: /tmp/gdb-5.2/gdb/gdb
-
-Breakpoint 1, main (argc=1, argv=0xbffff8b4) at main.c:734
-734 catch_errors (captured_main, &args, "", RETURN_MASK_ALL);
-(gdb) print args
-$1 = @{argc = 136426532, argv = 0x821b7f0@}
-(gdb)
-@end smallexample
-
-@subsection Make a release candidate available
-
-If this is a release candidate then the only remaining steps are:
-
-@enumerate
-@item
-Commit @file{version.in} and @file{ChangeLog}
-@item
-Tweak @file{version.in} (and @file{ChangeLog} to read
-@var{L}.@var{M}.@var{N}-DATE-cvs so that the version substitution
-process can restart.
-@item
-Make the release candidate available in
-@uref{ftp://sourceware.org/pub/gdb/snapshots/branch}
-@item
-Notify the relevant mailing lists ( @email{gdb@@sourceware.org} and
-@email{gdb-testers@@sourceware.org} that the candidate is available.
-@end enumerate
-
-@subsection Make a formal release available
-
-(And you thought all that was required was to post an e-mail.)
-
-@subsubheading Install on sware
-
-Copy the new files to both the release and the old release directory:
-
-@smallexample
-$ cp *.bz2 *.gz ~ftp/pub/gdb/old-releases/
-$ cp *.bz2 *.gz ~ftp/pub/gdb/releases
-@end smallexample
-
-@noindent
-Clean up the releases directory so that only the most recent releases
-are available (e.g.@: keep 5.2 and 5.2.1 but remove 5.1):
-
-@smallexample
-$ cd ~ftp/pub/gdb/releases
-$ rm @dots{}
-@end smallexample
-
-@noindent
-Update the file @file{README} and @file{.message} in the releases
-directory:
-
-@smallexample
-$ vi README
-@dots{}
-$ rm -f .message
-$ ln README .message
-@end smallexample
-
-@subsubheading Update the web pages.
-
-@table @file
-
-@item htdocs/download/ANNOUNCEMENT
-This file, which is posted as the official announcement, includes:
-@itemize @bullet
-@item
-General announcement.
-@item
-News. If making an @var{M}.@var{N}.1 release, retain the news from
-earlier @var{M}.@var{N} release.
-@item
-Errata.
-@end itemize
-
-@item htdocs/index.html
-@itemx htdocs/news/index.html
-@itemx htdocs/download/index.html
-These files include:
-@itemize @bullet
-@item
-Announcement of the most recent release.
-@item
-News entry (remember to update both the top level and the news directory).
-@end itemize
-These pages also need to be regenerate using @code{index.sh}.
-
-@item download/onlinedocs/
-You need to find the magic command that is used to generate the online
-docs from the @file{.tar.bz2}. The best way is to look in the output
-from one of the nightly @code{cron} jobs and then just edit accordingly.
-Something like:
-
-@smallexample
-$ ~/ss/update-web-docs \
- ~ftp/pub/gdb/releases/gdb-5.2.tar.bz2 \
- $PWD/www \
- /www/sourceware/htdocs/gdb/download/onlinedocs \
- gdb
-@end smallexample
-
-@item download/ari/
-Just like the online documentation. Something like:
-
-@smallexample
-$ /bin/sh ~/ss/update-web-ari \
- ~ftp/pub/gdb/releases/gdb-5.2.tar.bz2 \
- $PWD/www \
- /www/sourceware/htdocs/gdb/download/ari \
- gdb
-@end smallexample
-
-@end table
-
-@subsubheading Shadow the pages onto gnu
-
-Something goes here.
-
-
-@subsubheading Install the @value{GDBN} tar ball on GNU
-
-At the time of writing, the GNU machine was @kbd{gnudist.gnu.org} in
-@file{~ftp/gnu/gdb}.
-
-@subsubheading Make the @file{ANNOUNCEMENT}
-
-Post the @file{ANNOUNCEMENT} file you created above to:
-
-@itemize @bullet
-@item
-@email{gdb-announce@@sourceware.org, GDB Announcement mailing list}
-@item
-@email{info-gnu@@gnu.org, General GNU Announcement list} (but delay it a
-day or so to let things get out)
-@item
-@email{bug-gdb@@gnu.org, GDB Bug Report mailing list}
-@end itemize
-
-@subsection Cleanup
-
-The release is out but you're still not finished.
-
-@subsubheading Commit outstanding changes
-
-In particular you'll need to commit any changes to:
-
-@itemize @bullet
-@item
-@file{gdb/ChangeLog}
-@item
-@file{gdb/version.in}
-@item
-@file{gdb/NEWS}
-@item
-@file{gdb/README}
-@end itemize
-
-@subsubheading Tag the release
-
-Something like:
-
-@smallexample
-$ d=`date -u +%Y-%m-%d`
-$ echo $d
-2002-01-24
-$ ( cd insight/src/gdb && cvs -f -q update )
-$ ( cd insight/src && cvs -f -q tag gdb_5_2-$d-release )
-@end smallexample
-
-Insight is used since that contains more of the release than
-@value{GDBN}.
-
-@subsubheading Mention the release on the trunk
-
-Just put something in the @file{ChangeLog} so that the trunk also
-indicates when the release was made.
-
-@subsubheading Restart @file{gdb/version.in}
-
-If @file{gdb/version.in} does not have the string @samp{DATE} then
-builds will not include the checkout date in their resulting version.
-Having committed all the release changes it can be set to
-@file{5.2.0_DATE-cvs} which will restart things.
-
-Don't forget the @file{ChangeLog}.
-
-@subsubheading Merge into trunk
-
-The files committed to the branch may also need changes merged into the
-trunk.
-
-@subsubheading Revise the release schedule
-
-Post a revised release schedule to @email{gdb@@sourceware.org, GDB
-Discussion List} with an updated announcement. The schedule can be
-generated by running:
-
-@smallexample
-$ ~/ss/schedule `date +%s` schedule
-@end smallexample
-
-@noindent
-The first parameter is approximate date/time in seconds (from the epoch)
-of the most recent release.
-
-Also update the schedule @code{cronjob}.
-
-@section Post release
-
-Remove any @code{OBSOLETE} code.
-
-@node Testsuite
-
-@chapter Testsuite
-@cindex test suite
-
-The testsuite is an important component of the @value{GDBN} package.
-While it is always worthwhile to encourage user testing, in practice
-this is rarely sufficient; users typically use only a small subset of
-the available commands, and it has proven all too common for a change
-to cause a significant regression that went unnoticed for some time.
-
-The @value{GDBN} testsuite uses the DejaGNU testing framework. The
-tests themselves are calls to various @code{Tcl} procs; the framework
-runs all the procs and summarizes the passes and fails.
-
-@section Using the Testsuite
-
-@cindex running the test suite
-To run the testsuite, simply go to the @value{GDBN} object directory (or to the
-testsuite's objdir) and type @code{make check}. This just sets up some
-environment variables and invokes DejaGNU's @code{runtest} script. While
-the testsuite is running, you'll get mentions of which test file is in use,
-and a mention of any unexpected passes or fails. When the testsuite is
-finished, you'll get a summary that looks like this:
-
-@smallexample
- === gdb Summary ===
-
-# of expected passes 6016
-# of unexpected failures 58
-# of unexpected successes 5
-# of expected failures 183
-# of unresolved testcases 3
-# of untested testcases 5
-@end smallexample
-
-To run a specific test script, type:
-@example
-make check RUNTESTFLAGS='@var{tests}'
-@end example
-where @var{tests} is a list of test script file names, separated by
-spaces.
-
-If you use GNU make, you can use its @option{-j} option to run the
-testsuite in parallel. This can greatly reduce the amount of time it
-takes for the testsuite to run. In this case, if you set
-@code{RUNTESTFLAGS} then, by default, the tests will be run serially
-even under @option{-j}. You can override this and force a parallel run
-by setting the @code{make} variable @code{FORCE_PARALLEL} to any
-non-empty value. Note that the parallel @kbd{make check} assumes
-that you want to run the entire testsuite, so it is not compatible
-with some dejagnu options, like @option{--directory}.
-
-The ideal test run consists of expected passes only; however, reality
-conspires to keep us from this ideal. Unexpected failures indicate
-real problems, whether in @value{GDBN} or in the testsuite. Expected
-failures are still failures, but ones which have been decided are too
-hard to deal with at the time; for instance, a test case might work
-everywhere except on AIX, and there is no prospect of the AIX case
-being fixed in the near future. Expected failures should not be added
-lightly, since you may be masking serious bugs in @value{GDBN}.
-Unexpected successes are expected fails that are passing for some
-reason, while unresolved and untested cases often indicate some minor
-catastrophe, such as the compiler being unable to deal with a test
-program.
-
-When making any significant change to @value{GDBN}, you should run the
-testsuite before and after the change, to confirm that there are no
-regressions. Note that truly complete testing would require that you
-run the testsuite with all supported configurations and a variety of
-compilers; however this is more than really necessary. In many cases
-testing with a single configuration is sufficient. Other useful
-options are to test one big-endian (Sparc) and one little-endian (x86)
-host, a cross config with a builtin simulator (powerpc-eabi,
-mips-elf), or a 64-bit host (Alpha).
-
-If you add new functionality to @value{GDBN}, please consider adding
-tests for it as well; this way future @value{GDBN} hackers can detect
-and fix their changes that break the functionality you added.
-Similarly, if you fix a bug that was not previously reported as a test
-failure, please add a test case for it. Some cases are extremely
-difficult to test, such as code that handles host OS failures or bugs
-in particular versions of compilers, and it's OK not to try to write
-tests for all of those.
-
-DejaGNU supports separate build, host, and target machines. However,
-some @value{GDBN} test scripts do not work if the build machine and
-the host machine are not the same. In such an environment, these scripts
-will give a result of ``UNRESOLVED'', like this:
-
-@smallexample
-UNRESOLVED: gdb.base/example.exp: This test script does not work on a remote host.
-@end smallexample
-
-@section Testsuite Parameters
-
-Several variables exist to modify the behavior of the testsuite.
-
-@table @code
-
-@item TRANSCRIPT
-
-Sometimes it is convenient to get a transcript of the commands which
-the testsuite sends to @value{GDBN}. For example, if @value{GDBN}
-crashes during testing, a transcript can be used to more easily
-reconstruct the failure when running @value{GDBN} under @value{GDBN}.
-
-You can instruct the @value{GDBN} testsuite to write transcripts by
-setting the DejaGNU variable @code{TRANSCRIPT} (to any value)
-before invoking @code{runtest} or @kbd{make check}. The transcripts
-will be written into DejaGNU's output directory. One transcript will
-be made for each invocation of @value{GDBN}; they will be named
-@file{transcript.@var{n}}, where @var{n} is an integer. The first
-line of the transcript file will show how @value{GDBN} was invoked;
-each subsequent line is a command sent as input to @value{GDBN}.
-
-@smallexample
-make check RUNTESTFLAGS=TRANSCRIPT=y
-@end smallexample
-
-Note that the transcript is not always complete. In particular, tests
-of completion can yield partial command lines.
-
-@item GDB
-
-Sometimes one wishes to test a different @value{GDBN} than the one in the build
-directory. For example, one may wish to run the testsuite on
-@file{/usr/bin/gdb}.
-
-@smallexample
-make check RUNTESTFLAGS=GDB=/usr/bin/gdb
-@end smallexample
-
-@item GDBSERVER
-
-When testing a different @value{GDBN}, it is often useful to also test a
-different gdbserver.
-
-@smallexample
-make check RUNTESTFLAGS="GDB=/usr/bin/gdb GDBSERVER=/usr/bin/gdbserver"
-@end smallexample
-
-@item INTERNAL_GDBFLAGS
-
-When running the testsuite normally one doesn't want whatever is in
-@file{~/.gdbinit} to interfere with the tests, therefore the test harness
-passes @option{-nx} to @value{GDBN}. One also doesn't want any windowed
-version of @value{GDBN}, e.g., @samp{gdb -tui}, to run.
-This is achieved via @code{INTERNAL_GDBFLAGS}.
-
-@smallexample
-set INTERNAL_GDBFLAGS "-nw -nx"
-@end smallexample
-
-This is all well and good, except when testing an installed @value{GDBN}
-that has been configured with @option{--with-system-gdbinit}. Here one
-does not want @file{~/.gdbinit} loaded but one may want the system
-@file{.gdbinit} file loaded. This can be achieved by pointing @code{$HOME}
-at a directory without a @file{.gdbinit} and by overriding
-@code{INTERNAL_GDBFLAGS} and removing @option{-nx}.
-
-@smallexample
-cd testsuite
-HOME=`pwd` runtest \
- GDB=/usr/bin/gdb \
- GDBSERVER=/usr/bin/gdbserver \
- INTERNAL_GDBFLAGS=-nw
-@end smallexample
-
-@item GDB_PARALLEL
-
-When testing natively (that is, not with a remote host), the
-@value{GDBN} test suite can be run in a fully parallel mode. In this
-mode, each @file{.exp} file can be run separately. The test suite
-will ensure that all the temporary files created by the test suite do
-not clash, by putting them into separate directories. This mode is
-primarily intended for use by the @file{Makefile}.
-
-To use this mode, set the @code{GDB_PARALLEL} on the @command{runtest}
-command line. Before starting the tests, you must ensure that the
-directories @file{cache}, @file{outputs}, and @file{temp} in the test
-suite build directory are either empty or have been deleted.
-@file{cache} in particular is used to share data across invocations of
-@command{runtest}, and files there may affect the test results. Note
-that the @file{Makefile} automatically does these deletions.
-
-@item GDB_INOTIFY
-
-For debugging parallel mode, it is handy to be able to see when a test
-case writes to a file outside of its designated output directory.
-
-If you have the @samp{inotify-tools} package installed, you can set
-the @code{GDB_INOTIFY} variable on the @command{runtest} command line.
-This will cause the test suite to watch for parallel-unsafe file
-creations and report them, both on @samp{stdout} and in the test suite
-@file{.log} file.
-
-This setting is only meaningful in conjunction with
-@code{GDB_PARALLEL}.
-
-@end table
-
-There are two ways to run the testsuite and pass additional parameters
-to DejaGnu. The first is with @kbd{make check} and specifying the
-makefile variable @samp{RUNTESTFLAGS}.
-
-@smallexample
-make check RUNTESTFLAGS=TRANSCRIPT=y
-@end smallexample
-
-The second is to cd to the @file{testsuite} directory and invoke the DejaGnu
-@command{runtest} command directly.
-
-@smallexample
-cd testsuite
-make site.exp
-runtest TRANSCRIPT=y
-@end smallexample
-
-@section Testsuite Configuration
-@cindex Testsuite Configuration
-
-It is possible to adjust the behavior of the testsuite by defining
-the global variables listed below, either in a @file{site.exp} file,
-or in a board file.
-
-@itemize @bullet
-
-@item @code{gdb_test_timeout}
-
-Defining this variable changes the default timeout duration used during
-communication with @value{GDBN}. More specifically, the global variable
-used during testing is @code{timeout}, but this variable gets reset to
-@code{gdb_test_timeout} at the beginning of each testcase, making sure
-that any local change to @code{timeout} in a testcase does not affect
-subsequent testcases.
-
-This global variable comes in handy when the debugger is slower than
-normal due to the testing environment, triggering unexpected @code{TIMEOUT}
-test failures. Examples include when testing on a remote machine, or
-against a system where communications are slow.
-
-If not specifically defined, this variable gets automatically defined
-to the same value as @code{timeout} during the testsuite initialization.
-The default value of the timeout is defined in the file
-@file{gdb/testsuite/config/unix.exp} that is part of the @value{GDBN}
-test suite@footnote{If you are using a board file, it could override
-the test-suite default; search the board file for "timeout".}.
-
-@end itemize
-
-@section Testsuite Organization
-
-@cindex test suite organization
-The testsuite is entirely contained in @file{gdb/testsuite}. While the
-testsuite includes some makefiles and configury, these are very minimal,
-and used for little besides cleaning up, since the tests themselves
-handle the compilation of the programs that @value{GDBN} will run. The file
-@file{testsuite/lib/gdb.exp} contains common utility procs useful for
-all @value{GDBN} tests, while the directory @file{testsuite/config} contains
-configuration-specific files, typically used for special-purpose
-definitions of procs like @code{gdb_load} and @code{gdb_start}.
-
-The tests themselves are to be found in @file{testsuite/gdb.*} and
-subdirectories of those. The names of the test files must always end
-with @file{.exp}. DejaGNU collects the test files by wildcarding
-in the test directories, so both subdirectories and individual files
-get chosen and run in alphabetical order.
-
-The following table lists the main types of subdirectories and what they
-are for. Since DejaGNU finds test files no matter where they are
-located, and since each test file sets up its own compilation and
-execution environment, this organization is simply for convenience and
-intelligibility.
-
-@table @file
-@item gdb.base
-This is the base testsuite. The tests in it should apply to all
-configurations of @value{GDBN} (but generic native-only tests may live here).
-The test programs should be in the subset of C that is valid K&R,
-ANSI/ISO, and C@t{++} (@code{#ifdef}s are allowed if necessary, for instance
-for prototypes).
-
-@item gdb.@var{lang}
-Language-specific tests for any language @var{lang} besides C. Examples are
-@file{gdb.cp} and @file{gdb.java}.
-
-@item gdb.@var{platform}
-Non-portable tests. The tests are specific to a specific configuration
-(host or target), such as HP-UX or eCos. Example is @file{gdb.hp}, for
-HP-UX.
-
-@item gdb.@var{compiler}
-Tests specific to a particular compiler. As of this writing (June
-1999), there aren't currently any groups of tests in this category that
-couldn't just as sensibly be made platform-specific, but one could
-imagine a @file{gdb.gcc}, for tests of @value{GDBN}'s handling of GCC
-extensions.
-
-@item gdb.@var{subsystem}
-Tests that exercise a specific @value{GDBN} subsystem in more depth. For
-instance, @file{gdb.disasm} exercises various disassemblers, while
-@file{gdb.stabs} tests pathways through the stabs symbol reader.
-@end table
-
-@section Writing Tests
-@cindex writing tests
-
-In many areas, the @value{GDBN} tests are already quite comprehensive; you
-should be able to copy existing tests to handle new cases.
-
-You should try to use @code{gdb_test} whenever possible, since it
-includes cases to handle all the unexpected errors that might happen.
-However, it doesn't cost anything to add new test procedures; for
-instance, @file{gdb.base/exprs.exp} defines a @code{test_expr} that
-calls @code{gdb_test} multiple times.
-
-Only use @code{send_gdb} and @code{gdb_expect} when absolutely
-necessary. Even if @value{GDBN} has several valid responses to
-a command, you can use @code{gdb_test_multiple}. Like @code{gdb_test},
-@code{gdb_test_multiple} recognizes internal errors and unexpected
-prompts.
-
-Do not write tests which expect a literal tab character from @value{GDBN}.
-On some operating systems (e.g.@: OpenBSD) the TTY layer expands tabs to
-spaces, so by the time @value{GDBN}'s output reaches expect the tab is gone.
-
-The source language programs do @emph{not} need to be in a consistent
-style. Since @value{GDBN} is used to debug programs written in many different
-styles, it's worth having a mix of styles in the testsuite; for
-instance, some @value{GDBN} bugs involving the display of source lines would
-never manifest themselves if the programs used GNU coding style
-uniformly.
-
-Some testcase results need more detailed explanation:
-
-@table @code
-@item KFAIL
-Known problem of @value{GDBN} itself. You must specify the @value{GDBN} bug
-report number like in these sample tests:
-@smallexample
-kfail "gdb/13392" "continue to marker 2"
-@end smallexample
-or
-@smallexample
-setup_kfail gdb/13392 "*-*-*"
-kfail "continue to marker 2"
-@end smallexample
-
-@item XFAIL
-Known problem of environment. This typically includes @value{NGCC} but it
-includes also many other system components which cannot be fixed in the
-@value{GDBN} project. Sample test with sanity check not knowing the specific
-cause of the problem:
-@smallexample
-# On x86_64 it is commonly about 4MB.
-if @{$stub_size > 25000000@} @{
- xfail "stub size $stub_size is too large"
- return
-@}
-@end smallexample
-
-You should provide bug report number for the failing component of the
-environment, if such bug report is available:
-@smallexample
-if @{[test_compiler_info @{gcc-[0-3]-*@}]
- || [test_compiler_info @{gcc-4-[0-5]-*@}]@} @{
- setup_xfail "gcc/46955" *-*-*
-@}
-gdb_test "python print ttype.template_argument(2)" "&C::c"
-@end smallexample
-@end table
-
-@section Board settings
-In @value{GDBN} testsuite, the tests can be configured or customized in the board
-file by means of @dfn{Board Settings}. Each setting should be consulted by
-test cases that depend on the corresponding feature.
-
-Here are the supported board settings:
-
-@table @code
-
-@item gdb,cannot_call_functions
-The board does not support inferior call, that is, invoking inferior functions
-in @value{GDBN}.
-@item gdb,can_reverse
-The board supports reverse execution.
-@item gdb,no_hardware_watchpoints
-The board does not support hardware watchpoints.
-@item gdb,nofileio
-@value{GDBN} is unable to intercept target file operations in remote and perform
-them on the host.
-@item gdb,noinferiorio
-The board is unable to provide I/O capability to the inferior.
-@c @item gdb,noresults
-@c NEED DOCUMENT.
-@item gdb,nosignals
-The board does not support signals.
-@item gdb,skip_huge_test
-Skip time-consuming tests on the board with slow connection.
-@item gdb,skip_float_tests
-Skip tests related to float points on target board.
-@item gdb,use_precord
-The board supports process record.
-@item gdb_server_prog
-The location of GDBserver. If GDBserver somewhere other than its default
-location is used in test, specify the location of GDBserver in this variable.
-The location is a file name of GDBserver that can be either absolute or
-relative to testsuite subdirectory in build directory.
-@item in_proc_agent
-The location of in-process agent. If in-process agent other than its default
-location is used in test, specify the location of in-process agent in
-this variable. The location is a file name of in-process agent that can be
-either absolute or relative to testsuite subdirectory in build directory.
-@item noargs
-@value{GDBN} does not support argument passing for inferior.
-@item no_long_long
-The board does not support type @code{long long}.
-@c @item use_cygmon
-@c NEED DOCUMENT.
-@item use_gdb_stub
-The tests are running with gdb stub.
-@item gdb,predefined_tsv
-The predefined trace state variables the board has.
-
-@end table
-
-@node Hints
-
-@chapter Hints
-
-Check the @file{README} file, it often has useful information that does not
-appear anywhere else in the directory.
-
-@menu
-* Getting Started:: Getting started working on @value{GDBN}
-* Debugging GDB:: Debugging @value{GDBN} with itself
-@end menu
-
-@node Getting Started
-
-@section Getting Started
-
-@value{GDBN} is a large and complicated program, and if you first starting to
-work on it, it can be hard to know where to start. Fortunately, if you
-know how to go about it, there are ways to figure out what is going on.
-
-This manual, the @value{GDBN} Internals manual, has information which applies
-generally to many parts of @value{GDBN}.
-
-Information about particular functions or data structures are located in
-comments with those functions or data structures. If you run across a
-function or a global variable which does not have a comment correctly
-explaining what is does, this can be thought of as a bug in @value{GDBN}; feel
-free to submit a bug report, with a suggested comment if you can figure
-out what the comment should say. If you find a comment which is
-actually wrong, be especially sure to report that.
-
-Comments explaining the function of macros defined in host, target, or
-native dependent files can be in several places. Sometimes they are
-repeated every place the macro is defined. Sometimes they are where the
-macro is used. Sometimes there is a header file which supplies a
-default definition of the macro, and the comment is there. This manual
-also documents all the available macros.
-@c (@pxref{Host Conditionals}, @pxref{Target
-@c Conditionals}, @pxref{Native Conditionals}, and @pxref{Obsolete
-@c Conditionals})
-
-Start with the header files. Once you have some idea of how
-@value{GDBN}'s internal symbol tables are stored (see @file{symtab.h},
-@file{gdbtypes.h}), you will find it much easier to understand the
-code which uses and creates those symbol tables.
-
-You may wish to process the information you are getting somehow, to
-enhance your understanding of it. Summarize it, translate it to another
-language, add some (perhaps trivial or non-useful) feature to @value{GDBN}, use
-the code to predict what a test case would do and write the test case
-and verify your prediction, etc. If you are reading code and your eyes
-are starting to glaze over, this is a sign you need to use a more active
-approach.
-
-Once you have a part of @value{GDBN} to start with, you can find more
-specifically the part you are looking for by stepping through each
-function with the @code{next} command. Do not use @code{step} or you
-will quickly get distracted; when the function you are stepping through
-calls another function try only to get a big-picture understanding
-(perhaps using the comment at the beginning of the function being
-called) of what it does. This way you can identify which of the
-functions being called by the function you are stepping through is the
-one which you are interested in. You may need to examine the data
-structures generated at each stage, with reference to the comments in
-the header files explaining what the data structures are supposed to
-look like.
-
-Of course, this same technique can be used if you are just reading the
-code, rather than actually stepping through it. The same general
-principle applies---when the code you are looking at calls something
-else, just try to understand generally what the code being called does,
-rather than worrying about all its details.
-
-@cindex command implementation
-A good place to start when tracking down some particular area is with
-a command which invokes that feature. Suppose you want to know how
-single-stepping works. As a @value{GDBN} user, you know that the
-@code{step} command invokes single-stepping. The command is invoked
-via command tables (see @file{command.h}); by convention the function
-which actually performs the command is formed by taking the name of
-the command and adding @samp{_command}, or in the case of an
-@code{info} subcommand, @samp{_info}. For example, the @code{step}
-command invokes the @code{step_command} function and the @code{info
-display} command invokes @code{display_info}. When this convention is
-not followed, you might have to use @code{grep} or @kbd{M-x
-tags-search} in emacs, or run @value{GDBN} on itself and set a
-breakpoint in @code{execute_command}.
-
-@cindex @code{bug-gdb} mailing list
-If all of the above fail, it may be appropriate to ask for information
-on @code{bug-gdb}. But @emph{never} post a generic question like ``I was
-wondering if anyone could give me some tips about understanding
-@value{GDBN}''---if we had some magic secret we would put it in this manual.
-Suggestions for improving the manual are always welcome, of course.
-
-@node Debugging GDB
-
-@section Debugging @value{GDBN} with itself
-@cindex debugging @value{GDBN}
-
-If @value{GDBN} is limping on your machine, this is the preferred way to get it
-fully functional. Be warned that in some ancient Unix systems, like
-Ultrix 4.2, a program can't be running in one process while it is being
-debugged in another. Rather than typing the command @kbd{@w{./gdb
-./gdb}}, which works on Suns and such, you can copy @file{gdb} to
-@file{gdb2} and then type @kbd{@w{./gdb ./gdb2}}.
-
-When you run @value{GDBN} in the @value{GDBN} source directory, it will read
-@file{gdb-gdb.gdb} file (plus possibly @file{gdb-gdb.py} file) that sets up
-some simple things to make debugging gdb easier. The @code{info} command, when
-executed without a subcommand in a @value{GDBN} being debugged by gdb, will pop
-you back up to the top level gdb. See @file{gdb-gdb.gdb} for details.
-
-If you use emacs, you will probably want to do a @code{make TAGS} after
-you configure your distribution; this will put the machine dependent
-routines for your local machine where they will be accessed first by
-@kbd{M-.}
-
-Also, make sure that you've either compiled @value{GDBN} with your local cc, or
-have run @code{fixincludes} if you are compiling with gcc.
-
-@section Submitting Patches
-
-@cindex submitting patches
-Thanks for thinking of offering your changes back to the community of
-@value{GDBN} users. In general we like to get well designed enhancements.
-Thanks also for checking in advance about the best way to transfer the
-changes.
-
-The @value{GDBN} maintainers will only install ``cleanly designed'' patches.
-This manual summarizes what we believe to be clean design for @value{GDBN}.
-
-If the maintainers don't have time to put the patch in when it arrives,
-or if there is any question about a patch, it goes into a large queue
-with everyone else's patches and bug reports.
-
-@cindex legal papers for code contributions
-The legal issue is that to incorporate substantial changes requires a
-copyright assignment from you and/or your employer, granting ownership
-of the changes to the Free Software Foundation. You can get the
-standard documents for doing this by sending mail to @code{gnu@@gnu.org}
-and asking for it. We recommend that people write in "All programs
-owned by the Free Software Foundation" as "NAME OF PROGRAM", so that
-changes in many programs (not just @value{GDBN}, but GAS, Emacs, GCC,
-etc) can be
-contributed with only one piece of legalese pushed through the
-bureaucracy and filed with the FSF. We can't start merging changes until
-this paperwork is received by the FSF (their rules, which we follow
-since we maintain it for them).
-
-Technically, the easiest way to receive changes is to receive each
-feature as a small context diff or unidiff, suitable for @code{patch}.
-Each message sent to me should include the changes to C code and
-header files for a single feature, plus @file{ChangeLog} entries for
-each directory where files were modified, and diffs for any changes
-needed to the manuals (@file{gdb/doc/gdb.texinfo} or
-@file{gdb/doc/gdbint.texinfo}). If there are a lot of changes for a
-single feature, they can be split down into multiple messages.
-
-In this way, if we read and like the feature, we can add it to the
-sources with a single patch command, do some testing, and check it in.
-If you leave out the @file{ChangeLog}, we have to write one. If you leave
-out the doc, we have to puzzle out what needs documenting. Etc., etc.
-
-The reason to send each change in a separate message is that we will not
-install some of the changes. They'll be returned to you with questions
-or comments. If we're doing our job correctly, the message back to you
-will say what you have to fix in order to make the change acceptable.
-The reason to have separate messages for separate features is so that
-the acceptable changes can be installed while one or more changes are
-being reworked. If multiple features are sent in a single message, we
-tend to not put in the effort to sort out the acceptable changes from
-the unacceptable, so none of the features get installed until all are
-acceptable.
-
-If this sounds painful or authoritarian, well, it is. But we get a lot
-of bug reports and a lot of patches, and many of them don't get
-installed because we don't have the time to finish the job that the bug
-reporter or the contributor could have done. Patches that arrive
-complete, working, and well designed, tend to get installed on the day
-they arrive. The others go into a queue and get installed as time
-permits, which, since the maintainers have many demands to meet, may not
-be for quite some time.
-
-Please send patches directly to
-@email{gdb-patches@@sourceware.org, the @value{GDBN} maintainers}.
-
-@section Build Script
-
-@cindex build script
-
-The script @file{gdb_buildall.sh} builds @value{GDBN} with flag
-@option{--enable-targets=all} set. This builds @value{GDBN} with all supported
-targets activated. This helps testing @value{GDBN} when doing changes that
-affect more than one architecture and is much faster than using
-@file{gdb_mbuild.sh}.
-
-After building @value{GDBN} the script checks which architectures are
-supported and then switches the current architecture to each of those to get
-information about the architecture. The test results are stored in log files
-in the directory the script was called from.
-
-@include observer.texi
-
-@node GNU Free Documentation License
-@appendix GNU Free Documentation License
-@include fdl.texi
-
-@node Concept Index
-@unnumbered Concept Index
-
-@printindex cp
-
-@node Function and Variable Index
-@unnumbered Function and Variable Index
-
-@printindex fn
-
-@bye