* config/a29k/tm-a29k.h: Renamed from config/a29k/tm-29k.h.

	* a29k-pinsn.c:  Renamed from am29k-pinsn.c.
	* a29k-tdep.c:  Renamed from am29k-tdep.c.
	* remote-eb.c, config/a29k/tm-ultra3.h:  Include renamed tm-a29k.h.
	* remote-monitor.c, remote-st2000.c, config/a29k/{nm-ultra3.h,
	tm-a29k.h, xm-ultra3.h}, config/romp/rtbsd.mh, doc/gdbinv-s.texi,
	testsuite/gdb.t15/funcargs.exp, testsuite/gdb.t17/callfuncs.exp:
	Map '29k' to 'a29k'.
	* config/a29k/{a29k-kern.mt, a29k-udi.mt, a29k.mt, ultra3.mt}
	(TDEPFILES):  Use renamed a29k-pinsn.o and a29k-tdep.o.
	* config/a29k/{a29k-udi.mt, a29k.mt} (TM_FILE):  Use renamed
	tm-a29k.h.
	* config/a29k/a29k-udi.mt (MT_CFLAGS):  Remove TARGET_AM29K
	define that does not appear anywhere else in the gdb source tree.
	* doc/gdbinit.texinfo:  Document renaming of tm-29k.h to tm-a29k.h.

1 files changed, 300 insertions, 0 deletions

diff --git a/gdb/a29k-pinsn.c b/gdb/a29k-pinsn.c
new file mode 100644
index 0000000..bd95aef
--- /dev/null
+++ b/gdb/a29k-pinsn.c
@@ -0,0 +1,300 @@
+/* Instruction printing code for the AMD 29000
+   Copyright (C) 1990 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.  Written by Jim Kingdon.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#include "defs.h"
+#include "target.h"
+#include "opcode/a29k.h"
+
+/* Print a symbolic representation of a general-purpose
+   register number NUM on STREAM.
+   NUM is a number as found in the instruction, not as found in
+   debugging symbols; it must be in the range 0-255.  */
+static void
+print_general (num, stream)
+     int num;
+     FILE *stream;
+{
+  if (num < 128)
+    fprintf_filtered (stream, "gr%d", num);
+  else
+    fprintf_filtered (stream, "lr%d", num - 128);
+}
+
+/* Like print_general but a special-purpose register.
+   
+   The mnemonics used by the AMD assembler are not quite the same
+   as the ones in the User's Manual.  We use the ones that the
+   assembler uses.  */
+static void
+print_special (num, stream)
+     int num;
+     FILE *stream;
+{
+  /* Register names of registers 0-SPEC0_NUM-1.  */
+  static char *spec0_names[] = {
+    "vab", "ops", "cps", "cfg", "cha", "chd", "chc", "rbp", "tmc", "tmr",
+    "pc0", "pc1", "pc2", "mmu", "lru"
+    };
+#define SPEC0_NUM ((sizeof spec0_names) / (sizeof spec0_names[0]))
+
+  /* Register names of registers 128-128+SPEC128_NUM-1.  */
+  static char *spec128_names[] = {
+    "ipc", "ipa", "ipb", "q", "alu", "bp", "fc", "cr"
+    };
+#define SPEC128_NUM ((sizeof spec128_names) / (sizeof spec128_names[0]))
+
+  /* Register names of registers 160-160+SPEC160_NUM-1.  */
+  static char *spec160_names[] = {
+    "fpe", "inte", "fps", "sr163", "exop"
+    };
+#define SPEC160_NUM ((sizeof spec160_names) / (sizeof spec160_names[0]))
+
+  if (num < SPEC0_NUM)
+    fprintf_filtered (stream, spec0_names[num]);
+  else if (num >= 128 && num < 128 + SPEC128_NUM)
+    fprintf_filtered (stream, spec128_names[num-128]);
+  else if (num >= 160 && num < 160 + SPEC160_NUM)
+    fprintf_filtered (stream, spec160_names[num-160]);
+  else
+    fprintf_filtered (stream, "sr%d", num);
+}
+
+/* Is an instruction with OPCODE a delayed branch?  */
+static int
+is_delayed_branch (opcode)
+     int opcode;
+{
+  return (opcode == 0xa8 || opcode == 0xa9 || opcode == 0xa0 || opcode == 0xa1
+	  || opcode == 0xa4 || opcode == 0xa5
+	  || opcode == 0xb4 || opcode == 0xb5
+	  || opcode == 0xc4 || opcode == 0xc0
+	  || opcode == 0xac || opcode == 0xad
+	  || opcode == 0xcc);
+}
+
+/* Now find the four bytes of INSN and put them in *INSN{0,8,16,24}.
+   Note that the amd can be set up as either
+   big or little-endian (the tm file says which) and we can't assume
+   the host machine is the same.  */
+static void
+find_bytes (insn, insn0, insn8, insn16, insn24)
+     char *insn;
+     unsigned char *insn0;
+     unsigned char *insn8;
+     unsigned char *insn16;
+     unsigned char *insn24;
+{
+#if TARGET_BYTE_ORDER == BIG_ENDIAN
+  *insn24 = insn[0];
+  *insn16 = insn[1];
+  *insn8  = insn[2];
+  *insn0  = insn[3];
+#else /* Little-endian.  */
+  *insn24 = insn[3];
+  *insn16 = insn[2];
+  *insn8 = insn[1];
+  *insn0 = insn[0];
+#endif /* Little-endian.  */
+}
+
+/* Print one instruction from MEMADDR on STREAM.
+   Return the size of the instruction (always 4 on a29k).  */
+int
+print_insn (memaddr, stream)
+     CORE_ADDR memaddr;
+     FILE *stream;
+{
+  /* The raw instruction.  */
+  char insn[4];
+
+  /* The four bytes of the instruction.  */
+  unsigned char insn24, insn16, insn8, insn0;
+
+  struct a29k_opcode const * opcode;
+
+  read_memory (memaddr, &insn[0], 4);
+
+  find_bytes (insn, &insn0, &insn8, &insn16, &insn24);
+
+  /* Handle the nop (aseq 0x40,gr1,gr1) specially */
+  if ((insn24==0x70) && (insn16==0x40) && (insn8==0x01) && (insn0==0x01)) {
+    fprintf_filtered (stream,"nop");
+    return 4;
+  }
+
+  /* The opcode is always in insn24.  */
+  for (opcode = &a29k_opcodes[0];
+       opcode < &a29k_opcodes[num_opcodes];
+       ++opcode)
+    {
+      if ((insn24<<24) == opcode->opcode)
+	{
+	  char *s;
+	  
+	  fprintf_filtered (stream, "%s ", opcode->name);
+	  for (s = opcode->args; *s != '\0'; ++s)
+	    {
+	      switch (*s)
+		{
+		case 'a':
+		  print_general (insn8, stream);
+		  break;
+		  
+		case 'b':
+		  print_general (insn0, stream);
+		  break;
+
+		case 'c':
+		  print_general (insn16, stream);
+		  break;
+
+		case 'i':
+		  fprintf_filtered (stream, "%d", insn0);
+		  break;
+
+		case 'x':
+		  fprintf_filtered (stream, "%d", (insn16 << 8) + insn0);
+		  break;
+
+		case 'h':
+		  fprintf_filtered (stream, "0x%x",
+				    (insn16 << 24) + (insn0 << 16));
+		  break;
+
+		case 'X':
+		  fprintf_filtered (stream, "%d",
+				    ((insn16 << 8) + insn0) | 0xffff0000);
+		  break;
+
+		case 'P':
+		  /* This output looks just like absolute addressing, but
+		     maybe that's OK (it's what the GDB 68k and EBMON
+		     29k disassemblers do).  */
+		  /* All the shifting is to sign-extend it.  p*/
+		  print_address
+		    (memaddr +
+		     (((int)((insn16 << 10) + (insn0 << 2)) << 14) >> 14),
+		     stream);
+		  break;
+
+		case 'A':
+		  print_address ((insn16 << 10) + (insn0 << 2), stream);
+		  break;
+
+		case 'e':
+		  fprintf_filtered (stream, "%d", insn16 >> 7);
+		  break;
+
+		case 'n':
+		  fprintf_filtered (stream, "0x%x", insn16 & 0x7f);
+		  break;
+
+		case 'v':
+		  fprintf_filtered (stream, "0x%x", insn16);
+		  break;
+
+		case 's':
+		  print_special (insn8, stream);
+		  break;
+
+		case 'u':
+		  fprintf_filtered (stream, "%d", insn0 >> 7);
+		  break;
+
+		case 'r':
+		  fprintf_filtered (stream, "%d", (insn0 >> 4) & 7);
+		  break;
+
+		case 'd':
+		  fprintf_filtered (stream, "%d", (insn0 >> 2) & 3);
+		  break;
+
+		case 'f':
+		  fprintf_filtered (stream, "%d", insn0 & 3);
+		  break;
+
+		case 'F':
+		  fprintf_filtered (stream, "%d", (insn16 >> 2) & 15);
+		  break;
+
+		case 'C':
+		  fprintf_filtered (stream, "%d", insn16 & 3);
+		  break;
+
+		default:
+		  fprintf_filtered (stream, "%c", *s);
+		}
+	    }
+
+	  /* Now we look for a const,consth pair of instructions,
+	     in which case we try to print the symbolic address.  */
+	  if (insn24 == 2)  /* consth */
+	    {
+	      int errcode;
+	      char prev_insn[4];
+	      unsigned char prev_insn0, prev_insn8, prev_insn16, prev_insn24;
+	      
+	      errcode = target_read_memory (memaddr - 4,
+					    &prev_insn[0],
+					    4);
+	      if (errcode == 0)
+		{
+		  /* If it is a delayed branch, we need to look at the
+		     instruction before the delayed brach to handle
+		     things like
+		     
+		     const _foo
+		     call _printf
+		     consth _foo
+		     */
+		  find_bytes (prev_insn, &prev_insn0, &prev_insn8,
+			      &prev_insn16, &prev_insn24);
+		  if (is_delayed_branch (prev_insn24))
+		    {
+		      errcode = target_read_memory
+			(memaddr - 8, &prev_insn[0], 4);
+		      find_bytes (prev_insn, &prev_insn0, &prev_insn8,
+				  &prev_insn16, &prev_insn24);
+		    }
+		}
+		  
+	      /* If there was a problem reading memory, then assume
+		 the previous instruction was not const.  */
+	      if (errcode == 0)
+		{
+		  /* Is it const to the same register?  */
+		  if (prev_insn24 == 3
+		      && prev_insn8 == insn8)
+		    {
+		      fprintf_filtered (stream, "\t; ");
+		      print_address (((insn16 << 24) + (insn0 << 16)
+				      + (prev_insn16 << 8) + (prev_insn0)),
+				     stream);
+		    }
+		}
+	    }
+
+	  return 4;
+	}
+    }
+  fprintf_filtered (stream, ".word 0x%8x",
+		    (insn24 << 24) + (insn16 << 16) + (insn8 << 8) + insn0);
+  return 4;
+}