TODO: Convert most items into PRs.

1 files changed, 15 insertions, 1582 deletions

diff --git a/gdb/TODO b/gdb/TODO
index 21e6904..afa64ce 100644
--- a/gdb/TODO
+++ b/gdb/TODO
@@ -45,29 +45,6 @@ Mark
 
 --
 
-RFD: infrun.c: No bpstat_stop_status call after proceed over break?
-http://sourceware.cygnus.com/ml/gdb-patches/2000-q1/msg00665.html
-
-GDB misses watchpoint triggers after proceeding over a breakpoint on
-x86 targets.
-
---
-
-GDB 5.0 doesn't work on Linux/SPARC
-
-There are two parts to this.
-
-      o	  GDB 5.0 doesn't work on GNU/Linux/SPARC32
-
-      o	  GDB 5.0 doesn't work on the new target
-	  GNU/Linux/SPARC64
-
-GDB does build on both these targets.
-
-The first problem is the one that should be fixed.
-
---
-
 		GDB 5.1 - New features
 		======================
 
@@ -121,14 +98,6 @@ The following code cleanups will hopefully be applied to GDB 5.1.
 
 --
 
-Fix copyright notices.
-
-Turns out that ``1998-2000'' isn't considered valid :-(
-
-http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00467.html
-
---
-
 		GDB 5.1 - Known Problems
 		========================
 
@@ -147,6 +116,17 @@ The m88k has suffered bit rot and is known to not build.
 
 --
 
+The BFD directory requires bug-fixed AUTOMAKE et.al.
+
+AUTOMAKE 1.4 incorrectly set the TEXINPUTS environment variable.  It
+contained the full path to texinfo.tex when it should have only
+contained the directory.  The bug has been fixed in the current
+AUTOMAKE sources.  Automake snapshots can be found in:
+	ftp://sourceware.cygnus.com/pub/gdb/snapshots
+and	ftp://sourceware.cygnus.com/pub/binutils
+
+--
+
 Solaris 8 x86 CURSES_H problem
 http://sources.redhat.com/ml/gdb/2000-07/msg00038.html
 
@@ -266,15 +246,17 @@ Deprecate, if not delete, the following:
 
 --
 
-Obsolete the targets.
+Obsolete the targets:
 
 arm*-wince-pe
 mips*-*-pe
 sh*-*-pe
 
+--
+
 Obsolete the protocols:
 
-RDB
+RDB?
 
 ``As of version 5.3, WindRiver has removed the RDB server (RDB
 protocol support is built into gdb).''  -- Till.
@@ -306,283 +288,6 @@ dependency lists.  It isn't done in a consistent way.
 The following are more general cleanups and fixes.  They are not tied
 to any specific release.
 
---
-
-Investigate changing --target=a29k-amd-udi to a29k-*-coff* and
-rationalize *.mt files.  The got-ya is in remote-eb.c - it has its own
-custom tty manipulation - it should be using the serial object.
-
---
-
-Rename read_register{,_pid}() to read_unsigned_register{,_pid}().
-
---
-
-Problem with weak functions
-http://sourceware.cygnus.com/ml/gdb/2000-05/msg00060.html
-
-Dan Nicolaescu writes:
-> It seems that gdb-4.95.1  does not display correctly the function when
-> stoping in weak functions. 
-> 
-> It stops in a function that is defined as weak, not in the function
-> that is actually run... 
-
---
-
-Follow through `make check' with --enable-shared.
-
-When the srcware tree is configured with --enable-shared, the `expect'
-program won't run properly.  Jim Wilson found out gdb has a local hack
-to set LD_LIBRARY_PATH, but, AFAIK, no other project has been hacked
-similarly.
-
-http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00845.html
-
---
-
-Delete macro TARGET_BYTE_ORDER_SELECTABLE.
-
-Patches in the database.
-
---
-
-printcmd.c (print_address_numeric):
-
-NOTE: This assumes that the significant address information is kept in
-the least significant bits of ADDR - the upper bits were either zero
-or sign extended.  Should ADDRESS_TO_POINTER() or some
-ADDRESS_TO_PRINTABLE() be used to do the conversion?
-
---
-
-The BFD directory requires bug-fixed AUTOMAKE et.al.
-
-AUTOMAKE 1.4 incorrectly set the TEXINPUTS environment variable.  It
-contained the full path to texinfo.tex when it should have only
-contained the directory.  The bug has been fixed in the current
-AUTOMAKE sources.  Automake snapshots can be found in:
-	ftp://sourceware.cygnus.com/pub/gdb/snapshots
-and	ftp://sourceware.cygnus.com/pub/binutils
-
---
-
-Find something better than DEFAULT_BFD_ARCH, DEFAULT_BFD_VEC to
-determine the default isa/byte-order.
-
---
-
-Rely on BFD_BIG_ENDIAN and BFD_LITTLE_ENDIAN instead of host dependent
-BIG_ENDIAN and LITTLE_ENDIAN.
-
---
-
-Eliminate more compiler warnings.
-
-Of course there also needs to be the usual debate over which warnings
-are valid and how to best go about this.
-
-One method: choose a single option; get agreement that it is
-reasonable; try it out to see if there isn't anything silly about it
-(-Wunused-parameters is an example of that) then incrementally hack
-away.
-
-The other method is to enable all warnings and eliminate them from one
-file at a time.
-
---
-
-Elimination of ``(catch_errors_ftype *) func''.
-
-Like make_cleanup_func it isn't portable.
-http://sourceware.cygnus.com/ml/gdb-patches/2000-q1/msg00791.html
-http://sourceware.cygnus.com/ml/gdb-patches/2000-q1/msg00814.html
-
---
-
-Nuke #define CONST_PTR.
-
---
-
-Nuke USG define.
-
---
-
-[PATCH/5] src/intl/Makefile.in:distclean additions
-http://sourceware.cygnus.com/ml/gdb-patches/2000-04/msg00363.html
-
-Do not forget to merge the patch back into the trunk.
-
---
-
-Rationalize the host-endian code (grep for HOST_BYTE_ORDER).
-
-At present defs.h includes <endian.h> (which is linux specific) yet
-almost nothing depends on it.  Suggest "gdb_endian.h" which can also
-handle <machine/endian.h> and only include that where it is really
-needed.
-
---
-
-Replace savestring() with something from libiberty.
-
-An xstrldup()? but that would have different semantics.
-
---
-
-Rationalize use of floatformat_unknown in GDB sources.
-
-Instead of defaulting to floatformat_unknown, should hosts/targets
-specify the value explicitly?
-
-http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00447.html
-
---
-
-Add a ``name'' member to include/floatformat.h:struct floatformat.
-Print that name in gdbarch.c.
-
---
-
-Sort out the harris mess in include/floatformat.h (it hardwires two
-different floating point formats).
-
---
-
-See of the GDB local floatformat_do_doublest() and libiberty's
-floatformat_to_double (which was once GDB's ...) can be merged some
-how.
-
---
-
-Eliminate mmalloc(), mstrsave() et.al. from GDB.
-
-Also eliminate it from defs.h.
-
---
-
-Eliminate PTR.  ISO-C allows ``void *''.
-
---
-
-Eliminate abort ().
-
-GDB should never abort.  GDB should either throw ``error ()'' or
-``internal_error ()''.  Better still GDB should naturally unwind with
-an error status.
-
---
-
-GDB probably doesn't build on FreeBSD pre 2.2.x
-http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00378.html
-
-Fixes to get FreeBSD working on 2.2.x, 3.x and 4.x caused the code to
-suffer bit rot.
-
---
-
-Deprecate "fg".  Apparently ``fg'' is actually continue.
-
-http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00417.html
-
---
-
-Deprecate current use of ``floatformat_unknown''.
-
-Require all targets to explicitly provide their float format instead
-of defaulting to floatformat unknown.  Doing the latter leads to nasty
-bugs.
-
-http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00447.html
-
---
-
-Rationalize floatformat_to_double() vs floatformat_to_doublest().
-
-Looks like GDB migrated floatformat_to_double() to libiberty but then
-turned around and created a ..._to_doublest() the latter containing
-several bug fixes.
-
-http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00472.html
-
---
-
-Move floatformat_ia64_ext to libiberty/include floatformat.[ch].
-
-http://sourceware.cygnus.com/ml/gdb-patches/2000-05/msg00466.html
-
---
-
-The ``maintenance deprecate set endian big'' command doesn't notice
-that it is deprecating ``set endian'' and not ``set endian big'' (big
-is implemented using an enum).  Is anyone going to notice this?
-
---
-
-When tab expanding something like ``set arch<tab>'' ignore the
-deprecated ``set archdebug'' and expand to ``set architecture''.
-
---
-
-Eliminate ``arm_register_names[j] = (char *) regnames[j]'' and the
-like from arm-tdep.c.
-
---
-
-Fix uses of ->function.cfunc = set_function().
-
-The command.c code calls sfunc() when a set command.  Rather than
-change it suggest fixing the callback function so that it is more
-useful.  See:
-
-http://sourceware.cygnus.com/ml/gdb-patches/2000-06/msg00062.html
-
-See also ``Fix implementation of  ``target xxx''.'' below.
-
---
-
-IRIX 3.x support is probably broken.
-
---
-
-Delete sim/SIM_HAVE_BREAKPOINTS and gdb/SIM_HAS_BREAKPOINTS.
-http://sourceware.cygnus.com/ml/gdb-patches/2000-07/msg00042.html
-
-Apart from the d30v, are there any sim/common simulators that make use
-of this?
-
-A brief summary of what happened is that sim/common/sim-break.c was
-created as a good idea.  It turned out a better idea was to use
-SIM_SIGBREAK and have GDB pass back sim_resume (..., SIGBREAK).
-
---
-
-Move remote_remove_hw_breakpoint, remote_insert_hw_breakpoint,
-remote_remove_watchpoint, remote_insert_watchpoint into target vector.
-
---
-
-Eliminate ``extern'' from C files.
-
---
-
-Replace ``STREQ()'' et.al. with ``strcmp() == 0'' et.al.
-
-Extreme care is recommeded - perhaps only modify tests that are
-exercised by the testsuite (as determined using some type of code
-coverage analysis).
-
---
-
-Replace the file gdb/CONTRIBUTE with a file that is generated from the
-gdb/doc/*.texinfo directory.
-
---
-
-Rewrite/break up sparcl-tdep.c so that it uses ser*.c as the mechanism
-for accessing either the serial or UDP port.
-
---
 
 			New Features and Fixes
 			======================
@@ -592,255 +297,6 @@ fundamental architectural change.
 
 --
 
-Hardware watchpoint problems on x86 OSes, including Linux:
-
-1. Delete/disable hardware watchpoints should free hardware debug
-registers. 
-2. Watch for different values on a viariable with one hardware debug
-register.
-
-According to Eli Zaretskii <eliz@delorie.com>:
-
-These are not GDB/ia32 issues per se: the above features are all
-implemented in the DJGPP port of GDB and work in v5.0.  Every
-x86-based target should be able to lift the relevant parts of
-go32-nat.c and use them almost verbatim.  You get debug register
-sharing through reference counts, and the ability to watch large
-regions (up to 16 bytes) using multiple registers.  (The required
-infrastructure in high-level GDB application code, mostly in
-breakpoint.c, is also working since v5.0.)
-
---
-
-Add built-by, build-date, tm, xm, nm and anything else into gdb binary
-so that you can see how the GDB was created.
-
---
-
-Add an "info bfd" command that displays supported object formats,
-similarly to objdump -i.
-
-Is there a command already?
-
---
-
-Fix ``I'm sorry, Dave, I can't do that.'' from symfile.c.
-
-This requires internationalization.
-
---
-
-Add support for:
- 
-(gdb) p fwprintf(stdout,L"%S\n", f)
-No symbol "L" in current context.
-
---
-
-Cleanup configury support for optional sub-directories.
-
-Check how GCC handles multiple front ends for an example of how things
-could work.  A tentative first step is to rationalize things so that
-all sub directories are handled in a fashion similar to gdb/mi.
-
-See also automake above.
-
---
-
-Add a transcript mechanism to GDB.
-
-Such a mechanism might log all gdb input and output to a file in a
-form that would allow it to be replayed.  It could involve ``gdb
---transcript=FILE'' or it could involve ``(gdb) transcript file''.
-
---
-
-Can the xdep files be replaced by autoconf?
-
---
-
-Document trace machinery
-
---
-
-Document ui-out and ui-file.
-
-http://sourceware.cygnus.com/ml/gdb/2000-04/msg00121.html
-
---
-
-Update texinfo.tex to latest?
-
---
-
-Incorporate agentexpr.texi into gdb.texinfo
-
-agentexpr.texi mostly describes the details of the byte code used for
-tracepoints, not the internals of the support for this in GDB.  So it
-looks like gdb.texinfo is a better place for this information.
-
-http://sourceware.cygnus.com/ml/gdb-patches/2000-04/msg00566.html
-
---
-
-Document overlay machinery.
-
---
-
-``(gdb) catch signal SIGNAL''
-
-Overlaps with ``handle SIGNAL'' but the implied behavior is different.
-You can attach commands to a catch but not a handle.  A handle has a
-limited number of hardwired actions.
-
---
-
-Fix TUI
-
-     o  readline/*.h bitrot
-
-        The TUI isn't up-to-date with
-        respect to the readline currently
-        bundled with GDB.  Importing a
-        new readline is on the 5.1 wish
-        list so this can only get worse.
-
-        Grep for things like term_cursor_move.
-
-        (To be honest, I don't see anyone
-        importing a new readline before 5.1 is
-        out)
-
-     o  tui.c:va_catch_errors() bitrot
-
-        This nasty piece of work used knowledge
-        of the internals of GDBs error functions :-(
-        Ever since those internals were cleaned
-        up this code has been broken. :-(
-
-     o  tuiWin.c:c_makeVisibleWithNewHeight() broken
-        tuiLayout.c:_extractDisplayStartAddr() broken
-
-        Both these function call find_line_pc()
-        incorrectly (wrong args, wrong return value).
-
-        I suspect this bug has always been there!
-        It had been hidden because those files
-        didn't include the necessary header files
-        from gdb proper :-(
-
-     o  tuiRegs() host dependant
-
-        Not suprisingly, this isn't a very portable
-        section of code.  However, I'm sure people
-        could live with no regs in the short to
-        medium term.
-
-     o  defs.h: #include "tui.h" et.al.
-
-        I'm not sure where this came from.
-        It was a really bad idea.
-
-        To get things to compile I did a nasty
-        hack (Just declare what was needed and
-        replace any expressions like xx->y.z()
-        in GDB proper with function calls).  I
-        could commit it slightly cleaned up if
-        you like.
-
-        Medium Term. the #ifdef TUI and TuiDo()
-        should be changed to hooks (like GDBTK).
-        The gdb-events.[hc] is there for that
-        purpose (1)
-
-     o  tui.c:_tuiReset() host dependant
-
-        tui.c contains a lump of termio[s]
-        I suspect an equivalent block of
-        code can be lifted from readline.
-        An equivalent readline function may
-        even be available.
-
-     o  curses.h vs ncurses.h.
-
-        Simple portability problem.
-
-     o  subsetCompare()
-
-        This function is a mystery - where is it?
-
-     o  tui-file.[hc] cleanup
-
-        This can be significantly simplified.
-
-     o  The code should be pacified. (-Werror -W...)
-
-        There are plenty of #includes,
-        duplicate #includes, missing function decls
-        and the like.
-
-        Some of the problems I found were through
-        fixing a few of the warnings.
-
-     o  The code should be GNUtified.
-
-        It would be very nice to have this code
-        look like the rest of GDB.  That way people
-        would be more accepting of it as a true
-        gdb component.
-
-        Until it is GNUtified it is going to stick
-        out like a sore thumb to the programmer.
-
-     o  The code should be clearly copyrighted
-
-        (FSF, with due credit to HP)
-
---
-
-Add support for ``gdb --- PROGRAM ARGS ...''.
-Add support for ``gdb -cmd=...''
-
-Along with many variations.  Check:
-
-????? for a full discussion.
-
-for a discussion.
-
---
-
-Implement ``(gdb) !ls''.
-
-Which is very different from ``(gdb) ! ls''.  Implementing the latter
-is trivial.
-
-http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00034.html
-
---
-
-Change the (char *list[]) to (const char (*)[]) so that dynamic lists can
-be passed.
-
---
-
-When tab expanding something like ``set arch<tab>'' ignore the
-deprecated ``set archdebug'' and expand to ``set architecture''.
-
---
-
-Replace the code that uses the host FPU with an emulator of the target
-FPU.
-
---
-
-The "ocd reset" command needs to flush the dcache, which requires breaking
-the abstraction layer between the target independent and target code.  One
-way to address this is provide a generic "reset" command and target vector.
-
-http://sources.redhat.com/ml/gdb-patches/2000-10/msg00011.html
-
---
-
 			Language Support
 			================
 
@@ -869,133 +325,10 @@ each other.
 
 --
 
-Add support for Modula3
-
-Get DEC/Compaq to contribute their Modula-3 support.
-
---
-
-		Remote Protocol Support
-		=======================
-
---
-
-Revised UDP support (was: Re: [Fwd: [patch] UDP transport support])
-http://sourceware.cygnus.com/ml/gdb-patches/2000-04/msg00000.html
-
-(Broken) support for GDB's remote protocol across UDP is to be
-included in the follow-on release.
-
-It should be noted that UDP can only work when the [Gg] packet fits in
-a single UDP packet.
-
-There is also much debate over the merit of this.
-
---
-
-Migrate qfThreadInfo packet -> qThreadInfo. (Andrew Cagney)
-
-Add support for packet enable/disable commands with these thread
-packets.  General cleanup.
-
-[PATCH] Document the ThreadInfo remote protocol queries
-http://sourceware.cygnus.com/ml/gdb-patches/2000-q1/msg00832.html
-
-[PATCH] "info threads" queries for remote.c
-http://sourceware.cygnus.com/ml/gdb-patches/2000-q1/msg00831.html
-
---
-
-Remote protocol doco feedback.
-
-Too much feedback to mention needs to be merged in (901660).  Search
-for the word ``remote''.
-
-
-http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00023.html
-http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00056.html
-http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00382.html
-
---
-
-GDB doesn't recover gracefully from remote protocol errors.
-
-GDB wasn't checking for NAKs from the remote target.  Instead a NAK is
-ignored and a timeout is required before GDB retries.  A pre-cursor to
-fixing this this is making GDB's remote protocol packet more robust.
-
-While downloading to a remote protocol target, gdb ignores packet
-errors in so far as it will continue to download with chunk N+1 even
-if chunk N was not correctly sent.  This causes gdb.base/remote.exp to
-take a painfully long time to run.  As a PS that test needs to be
-fixed so that it builds on 16 bit machines.
-
---
-
-Fix the ``!'' packet.
-
-JT reported that the existing targets do, in fact return ``OK'' so it
-is possible to merge remote and extended-remote targets.
-
---
-
-Drop ``<address>'' from the [SsCc] packets.
-
-I don't think that GDB generates them so having it in the protocol is
-silly.
-
---
-
-Fix doco on the ``q'' packet.
-
-It has evolved into a generic RPC.  The notes should reflect this and,
-perhaps, the ``Q'' packet can be deprecated.
-
-The doco should mention that ``OK'' is a valid packet response.
-
-The doco should explain why ``OK'' needs to be a valid packet
-response.
-
---
-
-Add the cycle step command.
-
-http://sourceware.cygnus.com/ml/gdb/2000-q1/msg00237.html
-
---
-
-Resolve how to scale things to support very large packets.
-
---
-
-Resolve how to handle a target that changes things like its endianess
-on the fly - should it be returned in the ``T'' packet?
-
-Underlying problem is that the register file is target endian.  If the
-target endianess changes gdb doesn't know.
-
-Suggest encoding registers as NN!VALUE.
-
---
-
-GDB should allow incomming packets to be larger than outgoing ones.  A
-fully loaded T packet (containing all registers) can be very large -
-definitly larger than a corresponding Gg packet.
-
---
 
 			Symbol Support
 			==============
 
-If / when GDB starts to support the debugging of multi-processor
-(rather than multi-thread) applications the symtab code will need to
-be updated a little so that several independent symbol tables are
-active at a given time.
-
-The other interesting change is a clarification of the exact meaning
-of CORE_ADDR and that has had consequences for a few targets (that
-were abusing that data type).
-
 --
 
 Investiagate ways of reducing memory.
@@ -1006,27 +339,6 @@ Investigate ways of improving load time.
 
 --
 
-Get the d10v to use POINTER_TO_ADDRESS and ADDRESS_TO_POINTER.
-
-Consequence of recent symtab clarification.  No marks for figuring out
-who maintains the d10v.
-
---
-
-Get the MIPS to correctly sign extend all address <-> pointer
-conversions.
-
-Consequence of recent symtab clarification.  No marks for figuring out
-who maintains the MIPS.
-
---
-
-GDB truncates 64 bit enums.
-
-http://sourceware.cygnus.com/ml/gdb-patches/2000-06/msg00290.html
-
---
-
 			Testsuite Support
 			=================
 
@@ -1042,24 +354,6 @@ Better C++ testsuite.
 
 --
 
-Look at adding a GDB specific testsuite directory so that white box
-tests of key internals can be added (eg ui_file).
-
---
-
-Separate out tests that involve the floating point (FP).
-
-(Something for people brining up new targets).  FP and non-fp tests
-are combined.  I think there should be set of basic tests that
-exercise pure integer support and then a more expanded set that
-exercise FP and FP/integer interactions.
-
-As an example, the MIPS, for n32 as problems with passing FP's and
-structs.  Since most inferior call tests include FP it is difficult to
-determine of the integer tests are ok.
-
---
-
 		Architectural Changes: General
 		==============================
 
@@ -1069,157 +363,6 @@ down into a more digestible set of cleanups and fixes.
 
 --
 
-Cleanup software single step.
-
-At present many targets implement software single step by directly
-blatting memory (see rs6000-tdep.c).  Those targets should register
-the applicable breakpoints using the breakpoint framework.  Perhaphs a
-new internal breakpoint class ``step'' is needed.
-
---
-
-Replace READ_FP() with FRAME_HANDLE().
-
-READ_FP() is a hangover from the days of the vax when the ABI really
-did have a frame pointer register.  Modern architectures typically
-construct a virtual frame-handle from the stack pointer and various
-other bits of string.
-
-Unfortunately GDB still treats this synthetic FP register as though it
-is real.  That in turn really confuses users (arm and ``print $fp'' VS
-``info registers fp'').  The synthetic FP should be separated out of
-the true register set presented to the user.
-
---
-
-Register Cache Cleanup (below from Andrew Cagney)
-
-I would depict the current register architecture as something like:
-
-        High GDB  -->   Low GDB
-            |              |
-           \|/            \|/
-            --- REG NR -----
-                   |
-    register + REGISTER_BYTE(reg_nr)
-                   |
-                  \|/
-        -------------------------
-        |  extern register[]    |
-        -------------------------
-
-where neither the high (valops.c et.al.) or low gdb (*-tdep.c) are
-really clear on what mechanisms they should be using to manipulate that
-buffer.   Further, much code assumes, dangerously, that registers are
-contigious.  Having got mips-tdep.c to support multiple ABIs, believe
-me, that is a bad assumption.  Finally, that register cache layout is
-determined by the current remote/local target and _not_ the less
-specific target ISA.  In fact, in many cases it is determined by the
-somewhat arbitrary layout of the [gG] packets!
-
-
-How I would like the register file to work is more like:
-
-
-          High GDB
-             |
-            \|/
-       pseudo reg-nr
-             |
-        map pseudo <->
-        random cache
-        bytes       
-             |
-            \|/
-        ------------
-        | register |
-        |  cache   |
-        ------------
-            /|\
-             |
-        map random cache
-        bytes to target
-        dependent i-face
-            /|\
-             |
-       target dependent
-        such as [gG] packet
-        or ptrace buffer
-
-The main objectives being:
-
-        o       a clear separation between the low
-                level target and the high level GDB
-
-        o       a mechanism that solves the general
-                problem of register aliases, overlaps
-                etc instead of treating them as optional
-                extras that can be wedged in as an after
-                thought (that is a reasonable description
-                of the current code).
-
-                Identify then solve the hard case and the
-                rest just falls out.  GDB solved the easy
-                case and then tried to ignore the real
-                world :-)
-
-        o       a removal of the assumption that the
-                mapping between the register cache
-                and virtual registers is largely static.
-                If you flip the USR/SSR stack register
-                select bit in the status-register then
-                the corresponding stack registers should
-                reflect the change.
-
-        o       a mechanism that clearly separates the
-                gdb internal register cache from any
-                target (not architecture) dependent
-                specifics such as [gG] packets.
-
-Of course, like anything, it sounds good in theory.  In reality, it
-would have to contend with many<->many relationships at both the
-virt<->cache and cache<->target level.  For instance:
-
-        virt<->cache
-                Modifying an mmx register may involve
-                scattering values across both FP and
-                mmpx specific parts of a buffer
-
-        cache<->target
-                When writing back a SP it may need to
-                both be written to both SP and USP.
-
-
-Hmm,
-
-Rather than let this like the last time it was discussed, just slip, I'm
-first going to add this e-mail (+ references) to TODO.  I'd then like to
-sketch out a broad strategy I think could get us there.
-
-
-First thing I'd suggest is separating out the ``extern registers[]''
-code so that we can at least identify what is using it.  At present
-things are scattered across many files.  That way we can at least
-pretend that there is a cache instead of a global array :-)
-
-I'd then suggest someone putting up a proposal for the pseudo-reg /
-high-level side interface so that code can be adopted to it.  For old
-code, initially a blanket rename of write_register_bytes() to
-deprecated_write_register_bytes() would help.
-
-Following that would, finaly be the corresponding changes to the target.
-
---
-
-Check that GDB can handle all BFD architectures (Andrew Cagney)
-
-There should be a test that checks that BFD/GDB are in sync with
-regard to architecture changes.  Something like a test that first
-queries GDB for all supported architectures and then feeds each back
-to GDB..  Anyone interested in learning how to write tests?  :-)
-
---
-
 		Architectural Change: Multi-arch et al.
 		=======================================
 
@@ -1237,82 +380,6 @@ will become much easier.
 
 --
 
-GDBARCH cleanup (Andrew Cagney)
-
-The non-generated parts of gdbarch.{sh,h,c} should be separated out
-into arch-utils.[hc].
-
-Document that gdbarch_init_ftype could easily fail because it didn't
-identify an architecture.
-
---
-
-Fix BELIEVE_PPC_PROMOTION.  Change it to BELIEVE_PPC_PROMOTION_P?
-
-At present there is still #ifdef BELIEVE_PPC_PROMOTION code in the
-symtab file.
-
---
-
-Fix target_signal_from_host() etc.
-
-The name is wrong for starters.  ``target_signal'' should probably be
-``gdb_signal''.  ``from_host'' should be ``from_target_signal''.
-After that it needs to be multi-arched and made independent of any
-host signal numbering.
-
-Once this is done, the signal enum can probably be moved to
-include/gdb so that it is available to embedded stubs.
-
---
-
-Update ALPHA so that it uses ``struct frame_extra_info'' instead of
-EXTRA_FRAME_INFO.
-
-This is a barrier to replacing mips_extra_func_info with something
-that works with multi-arch.
-
---
-
-Multi-arch  mips_extra_func_info.
-
-This first needs the alpha to be updated so that it uses ``struct
-frame_extra_info''.
-
---
-
-Rationalize TARGET_SINGLE_FORMAT and TARGET_SINGLE_BIT et al.
-
-Surely one of them is redundant.
-
---
-
-Convert ALL architectures to MULTI-ARCH.
-
---
-
-Select the initial multi-arch ISA / ABI based on --target or similar.
-
-At present the default is based on what ever is first in the BFD
-archures table.  It should be determined based on the ``--target=...''
-name.
-
---
-
-Make MIPS pure multi-arch.
-
-It is only at the multi-arch enabled stage.
-
---
-
-Truly multi-arch.
-
-Enable the code to recognize --enable-targets=.... like BINUTILS does.
-
-Can the tm.h and nm.h files be eliminated by multi-arch.
-
---
-
 	Architectural Change: MI, LIBGDB and scripting languages
 	========================================================
 
@@ -1325,170 +392,6 @@ scripting languages.
 
 --
 
-Implement generic ``(gdb) commmand > file''
-
-Once everything is going through ui_file it should be come fairly
-easy.
-
-http://sourceware.cygnus.com/ml/gdb/2000-04/msg00104.html
-
---
-
-Replace gdb_stdtarg with gdb_targout (and possibly gdb_targerr).
-
-gdb_stdtarg is easily confused with gdb_stdarg.
-
---
-
-Extra ui_file methods - dump.
-
-Very useful for whitebox testing.
-
---
-
-Eliminate error_begin().
-
-With ui_file, there is no need for the statefull error_begin ()
-function.
-
---
-
-Send normal output to gdb_stdout.
-Send error messages to gdb_stderror.
-Send debug and log output log gdb_stdlog.
-
-GDB still contains many cases where (f)printf or printf_filtered () is
-used when it should be sending the messages to gdb_stderror or
-gdb_stdlog.  The thought of #defining printf to something has crossed
-peoples minds ;-)
-
---
-
-Re-do GDB's output pager.
-
-GDB's output pager still relies on people correctly using *_filtered
-for gdb_stdout and *_unfiltered for gdb_stdlog / gdb_stderr.
-Hopefully, with all normal output going to gdb_stdout, the pager can
-just look at the ui_file that the output is on and then use that to
-decide what to do about paging.  Sounds good in theory.
-
---
-
-Check/cleanup MI documentation.
-
-The list of commands specified in the documentation needs to be
-checked against the mi-cmds.c table in a mechanical way (so that they
-two can be kept up-to-date).
-
---
-
-Convert MI into libgdb
-
-MI provides a text interface into what should be many of the libgdb
-functions.  The implementation of those functions should be separated
-into the MI interface and the functions proper.  Those functions being
-moved to gdb/lib say.
-
---
-
-Create libgdb.h
-
-The first part can already be found in defs.h.
-
---
-
-MI's input does not use buffering.
-
-At present the MI interface reads raw characters of from an unbuffered
-FD.  This is to avoid several nasty buffer/race conditions.  That code
-should be changed so that it registers its self with the event loop
-(on the input FD) and then push commands up to MI as they arrive.
-
-The serial code already does this.
-
---
-
-Make MI interface accessible from existing CLI.
-
---
-
-Add a breakpoint-edit command to MI.
-
-It would be similar to MI's breakpoint create but would apply to an
-existing breakpoint.  It saves the need to delete/create breakpoints
-when ever they are changed.
-
---
-
-Add directory path to MI breakpoint.
-
-That way the GUI's task of finding the file within which the
-breakpoint was set is simplified.
-
---
-
-Add a mechanism to reject certain expression classes to MI
-
-There are situtations where you don't want GDB's expression
-parser/evaluator to perform inferior function calls or variable
-assignments.  A way of restricting the expression parser so that such
-operations are not accepted would be very helpful.
-
---
-
-Remove sideffects from libgdb breakpoint create function.
-
-The user can use the CLI to create a breakpoint with partial
-information - no file (gdb would use the file from the last
-breakpoint).
-
-The libgdb interface currently affects that environment which can lead
-to confusion when a user is setting breakpoints via both the MI and
-the CLI.
-
-This is also a good example of how getting the CLI ``right'' will be
-hard.
-
---
-
-Move gdb_lasterr to ui_out?
-
-The way GDB throws errors and records them needs a re-think.  ui_out
-handles the correct output well.  It doesn't resolve what to do with
-output / error-messages when things go wrong.
-
---
-
-do_setshow_command contains a 1024 byte buffer.
-
-The function assumes that there will never be any more than 1024 bytes
-of enum.  It should use mem_file.
-
---
-
-Should struct cmd_list_element . completer take the command as an
-argument?
-
---
-
-Should the bulk of top.c:line_completion_function() be moved to
-command.[hc]?  complete_on_cmdlist() and complete_on_enums() could
-then be made private.
-
---
-
-top.c (execute_command): Should a command being valid when the target
-is running be made an attribute (predicate) to the command rather than
-an explicit set of tests.
-
---
-
-top.c (execute_command): Should the bulk of this function be moved
-into command.[hc] so that top.c doesn't grub around in the command
-internals?
-
---
-
 		Architectural Change: Async
 		===========================
 
@@ -1502,476 +405,6 @@ the remote targets ``async'' and ``extended-async''.
 
 --
 
-Asynchronous expression evaluator
-
-Inferior function calls hang GDB.
-
---
-
-Fix implementation of  ``target xxx''.
-
-At present when the user specifies ``target xxxx'', the CLI maps that
-directly onto a target open method.  It is then assumed that the
-target open method should do all sorts of complicated things as this
-is the only chance it has.  Check how the various remote targets
-duplicate the target operations.  Check also how the various targets
-behave differently for purely arbitrary reasons.
-
-What should happen is that ``target xxxx'' should call a generic
-``target'' function and that should then co-ordinate the opening of
-``xxxx''.  This becomes especially important when you're trying to
-open an asynchronous target that may need to perform background tasks
-as part of the ``attach'' phase.
-
-Unfortunately, due to limitations in the old/creaking command.h
-interface, that isn't possible.  The function being called isn't told
-of the ``xxx'' or any other context information.
-
-Consequently a precursor to fixing ``target xxxx'' is to clean up the
-CLI code so that it passes to the callback function (attatched to a
-command) useful information such as the actual command and a context
-for that command.  Other changes such as making ``struct command''
-opaque may also help.
-
-See also:
-http://sourceware.cygnus.com/ml/gdb-patches/2000-06/msg00062.html
-
---
-
-Make "target xxx" command interruptible.
-
-As things become async this becomes possible.  A target would start
-the connect and then return control to the event loop.  A cntrl-c
-would notify the target that the operation is to be abandoned and the
-target code could respond.
-
---
-
-Add a "suspend" subcommand of the "continue" command to suspend gdb
-while continuing  execution of the subprocess.  Useful when you are
-debugging servers and you want to dodge out and initiate a connection
-to a server running under gdb.
-
-[hey async!!]
-
---
-
-			TODO FAQ
-			========
-
-Frequently requested but not approved requests.
-
---
-
-Eliminate unused argument warnings using ATTRIBUTE_UNUSED.
-
-The benefits on this one are thought to be marginal - GDBs design
-means that unused parameters are very common.  GCC 3.0 will also
-include the option -Wno-unused-parameter which means that ``-Wall
--Wno-unused-parameters -Werror'' can be specified.
-
---
-
-
-
-			Legacy Wish List
-			================
-
-This list is not up to date, and opinions vary about the importance or
-even desirability of some of the items.  If you do fix something, it
-always pays to check the below.
-
---
-
-@c This does not work (yet if ever).  FIXME.
-@c @item --parse=@var{lang} @dots{}
-@c Configure the @value{GDBN} expression parser to parse the listed languages.
-@c @samp{all} configures @value{GDBN} for all supported languages.  To get a
-@c list of all supported languages, omit the argument.  Without this
-@c option, @value{GDBN} is configured to parse all supported languages.
-
---
-
-START_INFERIOR_TRAPS_EXPECTED need never be defined to 2, since that
-is its default value.  Clean this up.
-
---
-
-It should be possible to use symbols from shared libraries before we know
-exactly where the libraries will be loaded.  E.g. "b perror" before running
-the program.  This could maybe be done as an extension of the "breakpoint
-re-evaluation" after new symbols are loaded.
-
---
-
-Make single_step() insert and remove breakpoints in one operation.
-
-[If this is talking about having single_step() insert the breakpoints,
-run the target then pull the breakpoints then it is wrong.  The
-function has to return as control has to eventually be passed back to
-the main event loop.]
-
---
-
-Speed up single stepping by avoiding extraneous ptrace calls.
-
---
-
-Speed up single stepping by not inserting and removing breakpoints
-each time the inferior starts and stops.
-
-Breakpoints should not be inserted and deleted all the time.  Only the
-one(s) there should be removed when we have to step over one.  Support
-breakpoints that don't have to be removed to step over them.
-
-[this has resulted in numerous debates.  The issue isn't clear cut]
-
---
-
-Provide "voodoo" debugging of core files.  This creates a zombie
-process as a child of the debugger, and loads it up with the data,
-stack, and regs of the core file.  This allows you to call functions
-in the executable, to manipulate the data in the core file.
-
-[you wish]
-
---
-
-GDB reopens the source file on every line, as you "next" through it.
-
-[still true? I've a memory of this being fixed]
-
---
-
-Perhaps "i source" should take an argument like that of "list".
-
---
-
-Remove "at 0xnnnn" from the "b foo" response, if `print address off' and if
-it matches the source line indicated.
-
---
-
-The prompt at end of screen should accept space as well as CR.
-
---
-
-Backtrace should point out what the currently selected frame is, in
-its display, perhaps showing "@3 foo (bar, ...)" or ">3 foo (bar,
-...)" rather than "#3 foo (bar, ...)".
-
---
-
-"i program" should work for core files, and display more info, like what
-actually caused it to die.
-
---
-
-"x/10i" should shorten the long name, if any, on subsequent lines.
-
---
-
-"next" over a function that longjumps, never stops until next time you happen
-to get to that spot by accident.  E.g. "n" over execute_command which has
-an error.
-
---
-
-"set zeroprint off", don't bother printing members of structs which
-are entirely zero.  Useful for those big structs with few useful
-members.
-
---
-
-GDB does four ioctl's for every command, probably switching terminal modes
-to/from inferior or for readline or something.
-
---
-
-terminal_ours versus terminal_inferior: cache state.  Switch should be a noop
-if the state is the same, too.
-
---
-
-"i frame" shows wrong "arglist at" location, doesn't show where the args
-should be found, only their actual values.
-
---
-
-There should be a way for "set" commands to validate the new setting
-before it takes effect.
-
---
-
-"ena d" is ambiguous, why?  "ena delete" seems to think it is a command!
-
---
-
-i line VAR produces "Line number not known for symbol ``var''.".  I
-thought we were stashing that info now!
-
---
-
-We should be able to write to random files at hex offsets like adb.
-
---
-
-[elena - delete this]
-
-Handle add_file with separate text, data, and bss addresses.  Maybe
-handle separate addresses for each segment in the object file?
-
---
-
-[Jimb/Elena delete this one]
-
-Handle free_named_symtab to cope with multiply-loaded object files
-in a dynamic linking environment.  Should remember the last copy loaded,
-but not get too snowed if it finds references to the older copy.
-
---
-
-[elena delete this also]
-
-Remove all references to:
-	text_offset
-	data_offset
-	text_data_start
-	text_end
-	exec_data_offset
-	...
-now that we have BFD.  All remaining are in machine dependent files.
-
---
-
-Re-organize help categories into things that tend to fit on a screen
-and hang together.
-
---
-
-Add in commands like ADB's for searching for patterns, etc.  We should
-be able to examine and patch raw unsymboled binaries as well in gdb as
-we can in adb.  (E.g. increase the timeout in /bin/login without source).
-
-[actually, add ADB interface :-]
-
---
-
-When doing "step" or "next", if a few lines of source are skipped between
-the previous line and the current one, print those lines, not just the
-last line of a multiline statement.
-
---
-
-Handling of "&" address-of operator needs some serious overhaul
-for ANSI C and consistency on arrays and functions.
-  For "float point[15];":
-ptype &point[4]   ==> Attempt to take address of non-lvalue.
-  For "char *malloc();":
-ptype malloc	  ==> "char *()";  should be same as
-ptype &malloc     ==> "char *(*)()"
-call printf ("%x\n", malloc)   ==> weird value, should be same as
-call printf ("%x\n", &malloc)  ==> correct value
-
---
-
-Fix dbxread.c symbol reading in the presence of interrupts.  It
-currently leaves a cleanup to blow away the entire symbol table when a
-QUIT occurs.  (What's wrong with that? -kingdon, 28 Oct 1993).
-
-[I suspect that the grype was that, on a slow system, you might want
-to cntrl-c and get just half the symbols and then load the rest later
-- scary to be honest]
-
---
-
-Mipsread.c reads include files depth-first, because the dependencies
-in the psymtabs are way too inclusive (it seems to me).  Figure out what
-really depends on what, to avoid recursing 20 or 30 times while reading
-real symtabs.
-
---
-
-value_add() should be subtracting the lower bound of arrays, if known,
-and possibly checking against the upper bound for error reporting.
-
---
-
-When listing source lines, check for a preceding \n, to verify that
-the file hasn't changed out from under us.
-
-[fixed by some other means I think.  That hack wouldn't actually work
-reliably - the file might move such that another \n appears. ]
-
---
-
-Get all the remote systems (where the protocol allows it) to be able to
-stop the remote system when the GDB user types ^C (like remote.c
-does).  For ebmon, use ^Ak.
-
---
-
-Possible feature: A version of the "disassemble" command which shows
-both source and assembly code ("set symbol-filename on" is a partial
-solution).
-
-[has this been done?  It was certainly done for MI and GDBtk]
-
---
-
-investigate "x/s 0" (right now stops early) (I think maybe GDB is
-using a 0 address for bad purposes internally).
-
---
-
-Make "info path" and path_command work again (but independent of the
-environment either of gdb or that we'll pass to the inferior).
-
---
-
-Make GDB understand the GCC feature for putting octal constants in
-enums.  Make it so overflow on an enum constant does not error_type
-the whole type.  Allow arbitrarily large enums with type attributes.
-Put all this stuff in the testsuite.
-
---
-
-Make TYPE_CODE_ERROR with a non-zero TYPE_LENGTH more useful (print
-the value in hex; process type attributes).  Add this to the
-testsuite.  This way future compilers can add new types and old
-versions of GDB can do something halfway reasonable.
-
---
-
-Fix mdebugread.c:parse_type to do fundamental types right (see
-rs6000_builtin_type in stabsread.c for what "right" is--the point is
-that the debug format fixes the sizes of these things and it shouldn't
-depend on stuff like TARGET_PTR_BIT and so on.  For mdebug, there seem
-to be separate bt* codes for 64 bit and 32 bit things, and GDB should
-be aware of that).  Also use a switch statement for clarity and speed.
-
---
-
-Investigate adding symbols in target_load--some targets do, some
-don't.
-
---
-
-Put dirname in psymtabs and change lookup*symtab to use dirname (so
-/foo/bar.c works whether compiled by cc /foo/bar.c, or cd /foo; cc
-bar.c).
-
---
-
-Merge xcoffread.c and coffread.c.  Use breakpoint_re_set instead of
-fixup_breakpoints.
-
---
-
-Make a watchpoint which contains a function call an error (it is
-broken now, making it work is probably not worth the effort).
-
---
-
-New test case based on weird.exp but in which type numbers are not
-renumbered (thus multiply defining a type).  This currently causes an
-infinite loop on "p v_comb".
-
---
-
-[Hey! Hint Hint Delete Delete!!!]
-
-Fix 386 floating point so that floating point registers are real
-registers (but code can deal at run-time if they are missing, like
-mips and 68k).  This would clean up "info float" and related stuff.
-
---
-
-gcc -g -c enummask.c then gdb enummask.o, then "p v".  GDB complains
-about not being able to access memory location 0.
-
--------------------- enummask.c
-enum mask
-{
-  ANIMAL = 0,
-  VEGETABLE = 1,
-  MINERAL = 2,
-  BASIC_CATEGORY = 3,
-
-  WHITE = 0,
-  BLUE = 4,
-  GREEN = 8,
-  BLACK = 0xc,
-  COLOR = 0xc,
-
-  ALIVE = 0x10,
-
-  LARGE = 0x20
-} v;
-
---
-
-If try to modify value in file with "set write off" should give
-appropriate error not "cannot access memory at address 0x65e0".
-
---
-
-Allow core file without exec file on RS/6000.
-
---
-
-Make sure "shell" with no arguments works right on DOS.
-
---
-
-Make gdb.ini (as well as .gdbinit) be checked on all platforms, so
-the same directory can be NFS-mounted on unix or DOS, and work the
-same way.
-
---
-
-[Is this another delete???]
-
-Get SECT_OFF_TEXT stuff out of objfile_relocate (might be needed to
-get RS/6000 to work right, might not be immediately relevant).
-
---
-
-Work out some kind of way to allow running the inferior to be done as
-a sub-execution of, eg. breakpoint command lists.  Currently running
-the inferior interupts any command list execution.  This would require
-some rewriting of wait_for_inferior & friends, and hence should
-probably be done in concert with the above.
-
---
-
-Add function arguments to gdb user defined functions.
-
---
-
-Add convenience variables that refer to exec file, symbol file,
-selected frame source file, selected frame function, selected frame
-line number, etc.
-
---
-
-Modify the handling of symbols grouped through BINCL/EINCL stabs to
-allocate a partial symtab for each BINCL/EINCL grouping.  This will
-seriously decrease the size of inter-psymtab dependencies and hence
-lessen the amount that needs to be read in when a new source file is
-accessed. 
-
---
-
-Add a command for searching memory, a la adb.  It specifies size,
-mask, value, start address.  ADB searches until it finds it or hits
-an error (or is interrupted).
-
---
-
-Remove the range and type checking code and documentation, if not
-going to implement.
-
 # Local Variables:
 # mode: text
 # End: