Remove i370 support

include/
	* elf/i370.h: Delete.
	* opcode/i370.h: Delete.
bfd/
	* Makefile.am: Remove i370 support.
	* archures.c: Likewise.
	* config.bfd: Likewise.
	* configure.ac: Likewise.
	* targets.c: Likewise.
	* cpu-i370.c: Delete.
	* elf32-i370.c: Delete.
	* Makefile.in: Regenerate.
	* bfd-in2.h: Regenerate.
	* configure: Regenerate.
	* po/SRC-POTFILES.in: Regenerate.
opcodes/
	* Makefile.am: Remove i370 support.
	* configure.ac: Likewise.
	* disassemble.c: Likewise.
	* disassemble.h: Likewise.
	* i370-dis.c: Delete.
	* i370-opc.c: Delete.
	* Makefile.in: Regenerate.
	* configure: Regenerate.
	* po/POTFILES.in: Regenerate.
binutils/
	* readelf.c: Remove i370 support.
	* testsuite/binutils-all/objdump.exp: Likewise.
gas/
	* Makefile.am: Remove i370 support.
	* app.c: Likewise.
	* config/obj-elf.c: Likewise.
	* configure.tgt: Likewise.
	* doc/Makefile.am: Likewise.
	* doc/as.texinfo: Likewise.
	* testsuite/gas/all/gas.exp: Likewise.
	* testsuite/gas/elf/warn-2.s: Likewise.
	* testsuite/gas/lns/lns.exp: Likewise.
	* config/tc-i370.c: Delete.
	* config/tc-i370.h: Delete.
	* doc/c-i370.texi: Delete.
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
ld/
	* Makefile.am: Remove i370 support.
	* configure.tgt: Likewise.
	* testsuite/ld-elf/compressed1d.d: Likewise.
	* testsuite/ld-elf/group8a.d: Likewise.
	* testsuite/ld-elf/group8b.d: Likewise.
	* testsuite/ld-elf/group9a.d: Likewise.
	* testsuite/ld-elf/group9b.d: Likewise.
	* testsuite/ld-elf/merge.d: Likewise.
	* testsuite/ld-elf/pr12851.d: Likewise.
	* testsuite/ld-elf/pr12975.d: Likewise.
	* testsuite/ld-elf/pr13177.d: Likewise.
	* testsuite/ld-elf/pr13195.d: Likewise.
	* testsuite/ld-elf/pr17615.d: Likewise.
	* testsuite/ld-elf/pr21562a.d: Likewise.
	* testsuite/ld-elf/pr21562b.d: Likewise.
	* testsuite/ld-elf/pr21562c.d: Likewise.
	* testsuite/ld-elf/pr21562d.d: Likewise.
	* testsuite/ld-elf/pr21562i.d: Likewise.
	* testsuite/ld-elf/pr21562j.d: Likewise.
	* testsuite/ld-elf/pr21562k.d: Likewise.
	* testsuite/ld-elf/pr21562l.d: Likewise.
	* testsuite/ld-elf/pr21562m.d: Likewise.
	* testsuite/ld-elf/pr21562n.d: Likewise.
	* testsuite/ld-elf/pr22677.d: Likewise.
	* testsuite/lib/ld-lib.exp: Likewise.
	* emulparams/elf32i370.sh: Delete.
	* scripttempl/elfi370.sc: Delete.
	* Makefile.in: Regenerate.
	* po/BLD-POTFILES.in: Regenerate.

4 files changed, 0 insertions, 209 deletions

diff --git a/gas/doc/Makefile.am b/gas/doc/Makefile.am
index aee70dd..79d646d 100644
--- a/gas/doc/Makefile.am
+++ b/gas/doc/Makefile.am
@@ -58,7 +58,6 @@ CPU_DOCS = \
 	c-epiphany.texi \
 	c-h8300.texi \
 	c-hppa.texi \
-	c-i370.texi \
 	c-i386.texi \
 	c-ip2k.texi \
 	c-lm32.texi \
diff --git a/gas/doc/Makefile.in b/gas/doc/Makefile.in
index 8939093..d4b0cf8 100644
--- a/gas/doc/Makefile.in
+++ b/gas/doc/Makefile.in
@@ -333,7 +333,6 @@ CPU_DOCS = \
 	c-epiphany.texi \
 	c-h8300.texi \
 	c-hppa.texi \
-	c-i370.texi \
 	c-i386.texi \
 	c-ip2k.texi \
 	c-lm32.texi \
diff --git a/gas/doc/as.texinfo b/gas/doc/as.texinfo
index dfd436f..76ee990 100644
--- a/gas/doc/as.texinfo
+++ b/gas/doc/as.texinfo
@@ -7532,9 +7532,6 @@ subject, see the hardware manufacturer's manual.
 @ifset HPPA
 * HPPA-Dependent::              HPPA Dependent Features
 @end ifset
-@ifset I370
-* ESA/390-Dependent::           IBM ESA/390 Dependent Features
-@end ifset
 @ifset I80386
 * i386-Dependent::              Intel 80386 and AMD x86-64 Dependent Features
 @end ifset
@@ -7739,10 +7736,6 @@ family.
 @include c-hppa.texi
 @end ifset
 
-@ifset I370
-@include c-i370.texi
-@end ifset
-
 @ifset I80386
 @include c-i386.texi
 @end ifset
diff --git a/gas/doc/c-i370.texi b/gas/doc/c-i370.texi
deleted file mode 100644
index 1d2d518..0000000
--- a/gas/doc/c-i370.texi
+++ /dev/null
@@ -1,200 +0,0 @@
-@c Copyright (C) 2000-2018 Free Software Foundation, Inc.
-@c This is part of the GAS manual.
-@c For copying conditions, see the file as.texinfo.
-@ifset GENERIC
-@page
-@node ESA/390-Dependent
-@chapter ESA/390 Dependent Features
-@end ifset
-@ifclear GENERIC
-@node Machine Dependencies
-@chapter ESA/390 Dependent Features
-@end ifclear
-
-@cindex i370 support
-@cindex ESA/390 support
-
-@menu
-* ESA/390 Notes::                Notes
-* ESA/390 Options::              Options
-* ESA/390 Syntax::               Syntax
-* ESA/390 Floating Point::       Floating Point
-* ESA/390 Directives::           ESA/390 Machine Directives
-* ESA/390 Opcodes::              Opcodes
-@end menu
-
-@node ESA/390 Notes
-@section Notes
-The ESA/390 @code{@value{AS}} port is currently intended to be a back-end
-for the @sc{gnu} @sc{cc} compiler.  It is not HLASM compatible, although
-it does support a subset of some of the HLASM directives.  The only
-supported binary file format is ELF; none of the usual MVS/VM/OE/USS
-object file formats, such as ESD or XSD, are supported.
-
-When used with the @sc{gnu} @sc{cc} compiler, the ESA/390 @code{@value{AS}}
-will produce correct, fully relocated, functional binaries, and has been
-used to compile and execute large projects.  However, many aspects should
-still be considered experimental; these include shared library support,
-dynamically loadable objects, and any relocation other than the 31-bit
-relocation.
-
-@node ESA/390 Options
-@section Options
-@code{@value{AS}} has no machine-dependent command-line options for the ESA/390.
-
-@cindex ESA/390 Syntax
-@node ESA/390 Syntax
-@section Syntax
-The opcode/operand syntax follows the ESA/390 Principles of Operation
-manual; assembler directives and general syntax are loosely based on the
-prevailing AT&T/SVR4/ELF/Solaris style notation.  HLASM-style directives
-are @emph{not} supported for the most part, with the exception of those
-described herein.
-
-A leading dot in front of directives is optional, and the case of
-directives is ignored; thus for example, .using and USING have the same
-effect.
-
-A colon may immediately follow a label definition.  This is
-simply for compatibility with how most assembly language programmers
-write code.
-
-@samp{#} is the line comment character.
-
-@samp{;} can be used instead of a newline to separate statements.
-
-Since @samp{$} has no special meaning, you may use it in symbol names.
-
-Registers can be given the symbolic names r0..r15, fp0, fp2, fp4, fp6.
-By using these symbolic names, @code{@value{AS}} can detect simple
-syntax errors. The name rarg or r.arg is a synonym for r11, rtca or r.tca
-for r12, sp, r.sp, dsa r.dsa for r13, lr or r.lr for r14, rbase or r.base
-for r3 and rpgt or r.pgt for r4.
-
-@samp{*} is the current location counter.  Unlike @samp{.} it is always
-relative to the last USING directive.  Note that this means that
-expressions cannot use multiplication, as any occurrence of @samp{*}
-will be interpreted as a location counter.
-
-All labels are relative to the last USING.  Thus, branches to a label
-always imply the use of base+displacement.
-
-Many of the usual forms of address constants / address literals
-are supported.  Thus,
-@example
-	.using	*,r3
-	L	r15,=A(some_routine)
-	LM	r6,r7,=V(some_longlong_extern)
-	A	r1,=F'12'
-	AH	r0,=H'42'
-	ME	r6,=E'3.1416'
-	MD	r6,=D'3.14159265358979'
-	O	r6,=XL4'cacad0d0'
-	.ltorg
-@end example
-should all behave as expected: that is, an entry in the literal
-pool will be created (or reused if it already exists), and the
-instruction operands will be the displacement into the literal pool
-using the current base register (as last declared with the @code{.using}
-directive).
-
-@node ESA/390 Floating Point
-@section Floating Point
-@cindex floating point, ESA/390 (@sc{ieee})
-@cindex ESA/390 floating point (@sc{ieee})
-The assembler generates only @sc{ieee} floating-point numbers.  The older
-floating point formats are not supported.
-
-
-@node ESA/390 Directives
-@section ESA/390 Assembler Directives
-
-@code{@value{AS}} for the ESA/390 supports all of the standard ELF/SVR4
-assembler directives that are documented in the main part of this
-documentation.  Several additional directives are supported in order
-to implement the ESA/390 addressing model.  The most important of these
-are @code{.using} and @code{.ltorg}
-
-@cindex ESA/390-only directives
-These are the additional directives in @code{@value{AS}} for the ESA/390:
-
-@table @code
-@item .dc
-A small subset of the usual DC directive is supported.
-
-@item .drop @var{regno}
-Stop using @var{regno} as the base register.  The @var{regno} must
-have been previously declared with a @code{.using} directive in the
-same section as the current section.
-
-@item .ebcdic @var{string}
-Emit the EBCDIC equivalent of the indicated string.  The emitted string
-will be null terminated.  Note that the directives @code{.string} etc. emit
-ascii strings by default.
-
-@item EQU
-The standard HLASM-style EQU directive is not supported; however, the
-standard @code{@value{AS}} directive .equ can be used to the same effect.
-
-@item .ltorg
-Dump the literal pool accumulated so far; begin a new literal pool.
-The literal pool will be written in the current section; in order to
-generate correct assembly, a @code{.using} must have been previously
-specified in the same section.
-
-@item .using @var{expr},@var{regno}
-Use @var{regno} as the base register for all subsequent RX, RS, and SS form
-instructions. The @var{expr} will be evaluated to obtain the base address;
-usually, @var{expr} will merely be @samp{*}.
-
-This assembler allows two @code{.using} directives to be simultaneously
-outstanding, one in the @code{.text} section, and one in another section
-(typically, the @code{.data} section).  This feature allows
-dynamically loaded objects to be implemented in a relatively
-straightforward way.  A @code{.using} directive must always be specified
-in the @code{.text} section; this will specify the base register that
-will be used for branches in the @code{.text} section.  A second
-@code{.using} may be specified in another section; this will specify
-the base register that is used for non-label address literals.
-When a second @code{.using} is specified, then the subsequent
-@code{.ltorg} must be put in the same section; otherwise an error will
-result.
-
-Thus, for example, the following code uses @code{r3} to address branch
-targets and @code{r4} to address the literal pool, which has been written
-to the @code{.data} section.  The is, the constants @code{=A(some_routine)},
-@code{=H'42'} and @code{=E'3.1416'} will all appear in the @code{.data}
-section.
-
-@example
-.data
-	.using  LITPOOL,r4
-.text
-	BASR	r3,0
-	.using	*,r3
-        B       START
-	.long	LITPOOL
-START:
-	L	r4,4(,r3)
-	L	r15,=A(some_routine)
-	LTR	r15,r15
-	BNE	LABEL
-	AH	r0,=H'42'
-LABEL:
-	ME	r6,=E'3.1416'
-.data
-LITPOOL:
-	.ltorg
-@end example
-
-
-Note that this dual-@code{.using} directive semantics extends
-and is not compatible with HLASM semantics.  Note that this assembler
-directive does not support the full range of HLASM semantics.
-
-@end table
-
-@node ESA/390 Opcodes
-@section Opcodes
-For detailed information on the ESA/390 machine instruction set, see
-@cite{ESA/390 Principles of Operation} (IBM Publication Number DZ9AR004).