* Makefile.am (ALL_MACHINES): Add cpu-tilegx.lo and cpu-tilepro.lo.

    (ALL_MACHINE_CFILES): Add cpu-tilegx.c and cpu-tilepro.c.
    (BFD32_BACKENDS): Add elf32-tilegx.lo, elf32-tilepro.lo,
    and elfxx-tilegx.lo.
    (BFD32_BACKENDS_CFILES): Add elf32-tilegx.c elf32-tilepro.c, and
    elfxx-tilegx.c.
    (BFD64_BACKENDS): Add elf64-tilegx.lo.
    (BFD64_BACKENDS_CFILES): Add elf64-tilegx.c.
    * Makefile.in: Regenerate.
    * arctures.c (bfd_architecture): Define bfd_arch_tilepro,
    bfd_arch_tilegx, bfd_mach_tilepro, bfd_mach_tilegx.
    (bfd_arch_info): Add bfd_tilegx_arch, bfd_tilepro_arch.
    (bfd_archures_list): Add bfd_tilegx_arch, bfd_tilepro_arch.
    bfd-in2.h: Regenerate.
    * config.bfd: Handle tilegx-*-* and tilepro-*-*.
    * configure.in: Handle bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec,
    and bfd_elf64_tilegx_vec.
    * configure: Regenerate.
    * elf-bfd.h (enum elf_target_id): Define TILEGX_ELF_DATA and
    TILEPRO_ELF_DATA.
    * libbfd.h: Regenerate.
    * reloc.c: Add BFD_RELOC_TILEPRO_{COPY, GLOB_DAT, JMP_SLOT,
    RELATIVE, BROFF_X1, JOFFLONG_X1, JOFFLONG_X1_PLT, IMM8_X0,
    IMM8_Y0, IMM8_X1, IMM8_Y1, DEST_IMM8_X1, MT_IMM15_X1, MF_IMM15_X1,
    IMM16_X0, IMM16_X1, IMM16_X0_LO, IMM16_X1_LO, IMM16_X0_HI,
    IMM16_X1_HI, IMM16_X0_HA, IMM16_X1_HA, IMM16_X0_PCREL,
    IMM16_X1_PCREL, IMM16_X0_LO_PCREL, IMM16_X1_LO_PCREL,
    IMM16_X0_HI_PCREL, IMM16_X1_HI_PCREL, IMM16_X0_HA_PCREL,
    IMM16_X1_HA_PCREL, IMM16_X0_GOT, IMM16_X1_GOT, IMM16_X0_GOT_LO,
    IMM16_X1_GOT_LO, IMM16_X0_GOT_HI, IMM16_X1_GOT_HI,
    IMM16_X0_GOT_HA, IMM16_X1_GOT_HA, MMSTART_X0, MMEND_X0,
    MMSTART_X1, MMEND_X1, SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1,
    IMM16_X0_TLS_GD, IMM16_X1_TLS_GD, IMM16_X0_TLS_GD_LO,
    IMM16_X1_TLS_GD_LO, IMM16_X0_TLS_GD_HI, IMM16_X1_TLS_GD_HI,
    IMM16_X0_TLS_GD_HA, IMM16_X1_TLS_GD_HA, IMM16_X0_TLS_IE,
    IMM16_X1_TLS_IE, IMM16_X0_TLS_IE_LO, IMM16_X1_TLS_IE_LO,
    IMM16_X0_TLS_IE_HI, IMM16_X1_TLS_IE_HI, IMM16_X0_TLS_IE_HA,
    IMM16_X1_TLS_IE_HA, TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32}
    Add BFD_RELOC_TILEGX_{HW0, HW1, HW2, HW3, HW0_LAST, HW1_LAST,
    HW2_LAST, COPY, GLOB_DAT, JMP_SLOT, RELATIVE, BROFF_X1,
    JUMPOFF_X1, JUMPOFF_X1_PLT, IMM8_X0, IMM8_Y0, IMM8_X1, IMM8_Y1,
    DEST_IMM8_X1, MT_IMM14_X1, MF_IMM14_X1, MMSTART_X0, MMEND_X0,
    SHAMT_X0, SHAMT_X1, SHAMT_Y0, SHAMT_Y1, IMM16_X0_HW0,
    IMM16_X1_HW0, IMM16_X0_HW1, IMM16_X1_HW1, IMM16_X0_HW2,
    IMM16_X1_HW2, IMM16_X0_HW3, IMM16_X1_HW3, IMM16_X0_HW0_LAST,
    IMM16_X1_HW0_LAST, IMM16_X0_HW1_LAST, IMM16_X1_HW1_LAST,
    IMM16_X0_HW2_LAST, IMM16_X1_HW2_LAST, IMM16_X0_HW0_PCREL,
    IMM16_X1_HW0_PCREL, IMM16_X0_HW1_PCREL, IMM16_X1_HW1_PCREL,
    IMM16_X0_HW2_PCREL, IMM16_X1_HW2_PCREL, IMM16_X0_HW3_PCREL,
    IMM16_X1_HW3_PCREL, IMM16_X0_HW0_LAST_PCREL,
    IMM16_X1_HW0_LAST_PCREL, IMM16_X0_HW1_LAST_PCREL,
    IMM16_X1_HW1_LAST_PCREL, IMM16_X0_HW2_LAST_PCREL,
    IMM16_X1_HW2_LAST_PCREL, IMM16_X0_HW0_GOT, IMM16_X1_HW0_GOT,
    IMM16_X0_HW1_GOT, IMM16_X1_HW1_GOT, IMM16_X0_HW2_GOT,
    IMM16_X1_HW2_GOT, IMM16_X0_HW3_GOT, IMM16_X1_HW3_GOT,
    IMM16_X0_HW0_LAST_GOT, IMM16_X1_HW0_LAST_GOT,
    IMM16_X0_HW1_LAST_GOT, IMM16_X1_HW1_LAST_GOT,
    IMM16_X0_HW2_LAST_GOT, IMM16_X1_HW2_LAST_GOT, IMM16_X0_HW0_TLS_GD,
    IMM16_X1_HW0_TLS_GD, IMM16_X0_HW1_TLS_GD, IMM16_X1_HW1_TLS_GD,
    IMM16_X0_HW2_TLS_GD, IMM16_X1_HW2_TLS_GD, IMM16_X0_HW3_TLS_GD,
    IMM16_X1_HW3_TLS_GD, IMM16_X0_HW0_LAST_TLS_GD,
    IMM16_X1_HW0_LAST_TLS_GD, IMM16_X0_HW1_LAST_TLS_GD,
    IMM16_X1_HW1_LAST_TLS_GD, IMM16_X0_HW2_LAST_TLS_GD,
    IMM16_X1_HW2_LAST_TLS_GD, IMM16_X0_HW0_TLS_IE,
    IMM16_X1_HW0_TLS_IE, IMM16_X0_HW1_TLS_IE, IMM16_X1_HW1_TLS_IE,
    IMM16_X0_HW2_TLS_IE, IMM16_X1_HW2_TLS_IE, IMM16_X0_HW3_TLS_IE,
    IMM16_X1_HW3_TLS_IE, IMM16_X0_HW0_LAST_TLS_IE,
    IMM16_X1_HW0_LAST_TLS_IE, IMM16_X0_HW1_LAST_TLS_IE,
    IMM16_X1_HW1_LAST_TLS_IE, IMM16_X0_HW2_LAST_TLS_IE,
    IMM16_X1_HW2_LAST_TLS_IE, TLS_DTPMOD64, TLS_DTPOFF64, TLS_TPOFF64,
    TLS_DTPMOD32, TLS_DTPOFF32, TLS_TPOFF32}
    * targets.c (bfd_elf32_tilegx_vec): Declare.
    (bfd_elf32_tilepro_vec): Declare.
    (bfd_elf64_tilegx_vec): Declare.
    (bfd_target_vector): Add bfd_elf32_tilegx_vec, bfd_elf32_tilepro_vec,
    and bfd_elf64_tilegx_vec.
    * cpu-tilegx.c: New file.
    * cpu-tilepro.c: New file.
    * elf32-tilepro.h: New file.
    * elf32-tilepro.c: New file.
    * elf32-tilegx.c: New file.
    * elf32-tilegx.h: New file.
    * elf64-tilegx.c: New file.
    * elf64-tilegx.h: New file.
    * elfxx-tilegx.c: New file.
    * elfxx-tilegx.h: New file.

	* Makefile.am (TARGET_CPU_CFILES): Add config/tc-tilegx.c and
	config/tc-tilepro.c.
	(TARGET_CPU_HFILES): Add config/tc-tilegx.h and
	config/tc-tilepro.h.
	* Makefile.in: Regenerate.
	* configure.tgt (tilepro-*-*): New.
	(tilegx-*-*): Likewise.
	* config/tc-tilegx.c: New file.
	* config/tc-tilegx.h: Likewise.
	* config/tc-tilepro.h: Likewise.
	* config/tc-tilepro.c: Likewise.
	* doc/Makefile.am (CPU_DOCS): Add c-tilegx.texi and
	c-tilepro.texi.
	* doc/Makefile.in: Regenerate.
	* doc/all.texi (TILEGX): Define.
	(TILEPRO): Define.
	* doc/as.texinfo: Add Tile-Gx and TILEPro documentation.  Include
	c-tilegx.texi and c-tilepro.texi.
	* doc/c-tilegx.texi: New.
	* doc/c-tilepro.texi: New.

        * gas/tilepro/t_constants.s: New file.
	* gas/tilepro/t_constants.d: Likewise.
	* gas/tilepro/t_insns.s: Likewise.
	* gas/tilepro/tilepro.exp: Likewise.
	* gas/tilepro/t_insns.d: Likewise.
	* gas/tilegx/tilegx.exp: Likewise.
	* gas/tilegx/t_insns.d: Likewise.
	* gas/tilegx/t_insns.s: Likewise.

	* dis-asm.h (print_insn_tilegx): Declare.
	(print_insn_tilepro): Likewise.

	* tilegx.h: New file.
	* tilepro.h: New file.

	* common.h: Add EM_TILEGX.
	* tilegx.h: New file.
	* tilepro.h: New file.

	* Makefile.am (ALL_EMULATION_SOURCES): Add eelf32tilegx.c and
	eelf32tilepro.c.
	(ALL_64_EMULATION_SOURCES): Add eelf64tilegx.c.
	(eelf32tilegx.c): New target.
	(eelf32tilepro.c): Likewise.
	(eelf64tilegx.c): Likewise.
	* Makefile.in: Regenerate.
	* configure.tgt: Handle tilegx-*-* and tilepro-*-*.
	* emulparams/elf32tilegx.sh: New file.
	* emulparams/elf64tilegx.sh: New file.
	* emulparams/elf32tilepro.sh: New file.

	* ld-elf/eh5.d: Don't run on tile*.
	* ld-srec/srec.exp: xfail on tile*.
	* ld-tilegx/external.s: New file.
	* ld-tilegx/reloc.d: New file.
	* ld-tilegx/reloc.s: New file.
	* ld-tilegx/tilegx.exp: New file.
	* ld-tilepro/external.s: New file.
	* ld-tilepro/reloc.d: New file.
	* ld-tilepro/reloc.s: New file.
	* ld-tilepro/tilepro.exp: New file.

	* Makefile.am (TARGET_LIBOPCODES_CFILES): Add tilegx-dis.c,
	tilegx-opc.c, tilepro-dis.c, and tilepro-opc.c.
	* Makefile.in: Regenerate.
	* configure.in: Handle bfd_tilegx_arch and bfd_tilepro_arch.
	* configure: Regenerate.
	* disassemble.c (disassembler): Add ARCH_tilegx and ARCH_tilepro.
	* po/POTFILES.in: Regenerate.
	* tilegx-dis.c: New file.
	* tilegx-opc.c: New file.
	* tilepro-dis.c: New file.
	* tilepro-opc.c: New file.

1 files changed, 297 insertions, 0 deletions

diff --git a/gas/doc/c-tilepro.texi b/gas/doc/c-tilepro.texi
new file mode 100644
index 0000000..bbccdfb
--- /dev/null
+++ b/gas/doc/c-tilepro.texi
@@ -0,0 +1,297 @@
+@c Copyright 2011
+@c Free Software Foundation, Inc.
+@c This is part of the GAS manual.
+@c For copying conditions, see the file as.texinfo.
+@ifset GENERIC
+@page
+@node TILEPro-Dependent
+@chapter TILEPro Dependent Features
+@end ifset
+@ifclear GENERIC
+@node Machine Dependencies
+@chapter TILEPro Dependent Features
+@end ifclear
+
+@cindex TILEPro support
+@menu
+* TILEPro Options::		TILEPro Options
+* TILEPro Syntax::		TILEPro Syntax
+* TILEPro Directives::		TILEPro Directives
+@end menu
+
+@node TILEPro Options
+@section Options
+
+@code{@value{AS}} has no machine-dependent command-line options for
+TILEPro.
+
+@node TILEPro Syntax
+@section Syntax
+@cindex TILEPro syntax
+@cindex syntax, TILEPro
+
+Block comments are delimited by @samp{/*} and @samp{*/}.  End of line
+comments may be introduced by @samp{#}.
+
+Instructions consist of a leading opcode or macro name followed by
+whitespace and an optional comma-separated list of operands:
+
+@smallexample
+@var{opcode} [@var{operand}, @dots{}]
+@end smallexample
+
+Instructions must be separated by a newline or semicolon.
+
+There are two ways to write code: either write naked instructions,
+which the assembler is free to combine into VLIW bundles, or specify
+the VLIW bundles explicitly.
+
+Bundles are specified using curly braces:
+
+@smallexample
+@{ @var{add} r3,r4,r5 ; @var{add} r7,r8,r9 ; @var{lw} r10,r11 @}
+@end smallexample
+
+A bundle can span multiple lines. If you want to put multiple
+instructions on a line, whether in a bundle or not, you need to
+separate them with semicolons as in this example.
+
+A bundle may contain one or more instructions, up to the limit
+specified by the ISA (currently three). If fewer instructions are
+specified than the hardware supports in a bundle, the assembler
+inserts @code{fnop} instructions automatically.
+
+The assembler will prefer to preserve the ordering of instructions
+within the bundle, putting the first instruction in a lower-numbered
+pipeline than the next one, etc.  This fact, combined with the
+optional use of explicit @code{fnop} or @code{nop} instructions,
+allows precise control over which pipeline executes each instruction.
+
+If the instructions cannot be bundled in the listed order, the
+assembler will automatically try to find a valid pipeline
+assignment. If there is no way to bundle the instructions together,
+the assembler reports an error.
+
+The assembler does not yet auto-bundle (automatically combine multiple
+instructions into one bundle), but it reserves the right to do so in
+the future.  If you want to force an instruction to run by itself, put
+it in a bundle explicitly with curly braces and use @code{nop}
+instructions (not @code{fnop}) to fill the remaining pipeline slots in
+that bundle.
+
+@menu
+* TILEPro Opcodes::              Opcode Naming Conventions.
+* TILEPro Registers::            Register Naming.
+* TILEPro Modifiers::            Symbolic Operand Modifiers.
+@end menu
+
+@node TILEPro Opcodes
+@subsection Opcode Names
+@cindex TILEPro opcode names
+@cindex opcode names, TILEPro
+
+For a complete list of opcodes and descriptions of their semantics,
+see @cite{TILE Processor User Architecture Manual}, available upon
+request at www.tilera.com.
+
+@node TILEPro Registers
+@subsection Register Names
+@cindex TILEPro register names
+@cindex register names, TILEPro
+
+General-purpose registers are represented by predefined symbols of the
+form @samp{r@var{N}}, where @var{N} represents a number between
+@code{0} and @code{63}.  However, the following registers have
+canonical names that must be used instead:
+
+@table @code
+@item r54
+sp
+
+@item r55
+lr
+
+@item r56
+sn
+
+@item r57
+idn0
+
+@item r58
+idn1
+
+@item r59
+udn0
+
+@item r60
+udn1
+
+@item r61
+udn2
+
+@item r62
+udn3
+
+@item r63
+zero
+
+@end table
+
+The assembler will emit a warning if a numeric name is used instead of
+the canonical name.  The @code{.no_require_canonical_reg_names}
+assembler pseudo-op turns off this
+warning. @code{.require_canonical_reg_names} turns it back on.
+
+@node TILEPro Modifiers
+@subsection Symbolic Operand Modifiers
+@cindex TILEPro modifiers
+@cindex symbol modifiers, TILEPro
+
+The assembler supports several modifiers when using symbol addresses
+in TILEPro instruction operands.  The general syntax is the following:
+
+@smallexample
+modifier(symbol)
+@end smallexample
+
+The following modifiers are supported:
+
+@table @code
+
+@item lo16
+
+This modifier is used to load the low 16 bits of the symbol's address,
+sign-extended to a 32-bit value (sign-extension allows it to be
+range-checked against signed 16 bit immediate operands without
+complaint).
+
+@item hi16
+
+This modifier is used to load the high 16 bits of the symbol's
+address, also sign-extended to a 32-bit value.
+
+@item ha16
+
+@code{ha16(N)} is identical to @code{hi16(N)}, except if
+@code{lo16(N)} is negative it adds one to the @code{hi16(N)}
+value. This way @code{lo16} and @code{ha16} can be added to create any
+32-bit value using @code{auli}.  For example, here is how you move an
+arbitrary 32-bit address into r3:
+
+@smallexample
+moveli r3, lo16(sym)
+auli r3, r3, ha16(sym)
+@end smallexample
+
+@item got
+
+This modifier is used to load the offset of the GOT entry
+corresponding to the symbol.
+
+@item got_lo16
+
+This modifier is used to load the sign-extended low 16 bits of the
+offset of the GOT entry corresponding to the symbol.
+
+@item got_hi16
+
+This modifier is used to load the sign-extended high 16 bits of the
+offset of the GOT entry corresponding to the symbol.
+
+@item got_ha16
+
+This modifier is like @code{got_hi16}, but it adds one if
+@code{got_lo16} of the input value is negative.
+
+@item plt
+
+This modifier is used for function symbols.  It causes a
+@emph{procedure linkage table}, an array of code stubs, to be created
+at the time the shared object is created or linked against, together
+with a global offset table entry.  The value is a pc-relative offset
+to the corresponding stub code in the procedure linkage table.  This
+arrangement causes the run-time symbol resolver to be called to look
+up and set the value of the symbol the first time the function is
+called (at latest; depending environment variables).  It is only safe
+to leave the symbol unresolved this way if all references are function
+calls.
+
+@item tls_gd
+
+This modifier is used to load the offset of the GOT entry of the
+symbol's TLS descriptor, to be used for general-dynamic TLS accesses.
+
+@item tls_gd_lo16
+
+This modifier is used to load the sign-extended low 16 bits of the
+offset of the GOT entry of the symbol's TLS descriptor, to be used for
+general dynamic TLS accesses.
+
+@item tls_gd_hi16
+
+This modifier is used to load the sign-extended high 16 bits of the
+offset of the GOT entry of the symbol's TLS descriptor, to be used for
+general dynamic TLS accesses.
+
+@item tls_gd_ha16
+
+This modifier is like @code{tls_gd_hi16}, but it adds one to the value
+if @code{tls_gd_lo16} of the input value is negative.
+
+@item tls_ie
+
+This modifier is used to load the offset of the GOT entry containing
+the offset of the symbol's address from the TCB, to be used for
+initial-exec TLS accesses.
+
+@item tls_ie_lo16
+
+This modifier is used to load the low 16 bits of the offset of the GOT
+entry containing the offset of the symbol's address from the TCB, to
+be used for initial-exec TLS accesses.
+
+@item tls_ie_hi16
+
+This modifier is used to load the high 16 bits of the offset of the
+GOT entry containing the offset of the symbol's address from the TCB,
+to be used for initial-exec TLS accesses.
+
+@item tls_ie_ha16
+
+This modifier is like @code{tls_ie_hi16}, but it adds one to the value
+if @code{tls_ie_lo16} of the input value is negative.
+
+@end table
+
+@node TILEPro Directives
+@section TILEPro Directives
+@cindex machine directives, TILEPro
+@cindex TILEPro machine directives
+
+@table @code
+
+@cindex @code{.align} directive, TILEPro
+@item .align @var{expression} [, @var{expression}]
+This is the generic @var{.align} directive.  The first argument is the
+requested alignment in bytes.
+
+@cindex @code{.allow_suspicious_bundles} directive, TILEPro
+@item .allow_suspicious_bundles
+Turns on error checking for combinations of instructions in a bundle
+that probably indicate a programming error.  This is on by default.
+
+@item .no_allow_suspicious_bundles
+Turns off error checking for combinations of instructions in a bundle
+that probably indicate a programming error.
+
+@cindex @code{.require_canonical_reg_names} directive, TILEPro
+@item .require_canonical_reg_names
+Require that canonical register names be used, and emit a warning if
+the numeric names are used.  This is on by default.
+
+@item .no_require_canonical_reg_names
+Permit the use of numeric names for registers that have canonical
+names.
+
+@end table
+