configure: require libzstd >= 1.4.0

gas uses ZSTD_compressStream2 which is only available with libzstd >=
1.4.0, leading to build errors when an older version is installed.

This patch updates the check libzstd presence to check its version is
>= 1.4.0. However, since gas seems to be the only component requiring
such a recent version this may imply that we disable ZSTD support for
all components although some would still benefit from an older
version.

I ran 'autoreconf -f' in all directories containing a configure.ac
file, using vanilla autoconf-2.69 and automake-1.15.1. I noticed
several errors from autoheader in readline, as well as warnings in
intl, but they are unrelated to this patch.

This should fix some of the buildbots.

OK for trunk?

Thanks,

Christophe

7 files changed, 61 insertions, 61 deletions

diff --git a/bfd/configure b/bfd/configure
index 1c17606..5c6e382 100755
--- a/bfd/configure
+++ b/bfd/configure
@@ -13167,19 +13167,19 @@ fi
 if test "$with_zstd" != no; then :
 
 pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libzstd" >&5
-$as_echo_n "checking for libzstd... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libzstd >= 1.4.0" >&5
+$as_echo_n "checking for libzstd >= 1.4.0... " >&6; }
 
 if test -n "$ZSTD_CFLAGS"; then
     pkg_cv_ZSTD_CFLAGS="$ZSTD_CFLAGS"
  elif test -n "$PKG_CONFIG"; then
     if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd >= 1.4.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libzstd >= 1.4.0") 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-  pkg_cv_ZSTD_CFLAGS=`$PKG_CONFIG --cflags "libzstd" 2>/dev/null`
+  pkg_cv_ZSTD_CFLAGS=`$PKG_CONFIG --cflags "libzstd >= 1.4.0" 2>/dev/null`
 		      test "x$?" != "x0" && pkg_failed=yes
 else
   pkg_failed=yes
@@ -13191,12 +13191,12 @@ if test -n "$ZSTD_LIBS"; then
     pkg_cv_ZSTD_LIBS="$ZSTD_LIBS"
  elif test -n "$PKG_CONFIG"; then
     if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd >= 1.4.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libzstd >= 1.4.0") 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-  pkg_cv_ZSTD_LIBS=`$PKG_CONFIG --libs "libzstd" 2>/dev/null`
+  pkg_cv_ZSTD_LIBS=`$PKG_CONFIG --libs "libzstd >= 1.4.0" 2>/dev/null`
 		      test "x$?" != "x0" && pkg_failed=yes
 else
   pkg_failed=yes
@@ -13241,9 +13241,9 @@ else
         _pkg_short_errors_supported=no
 fi
         if test $_pkg_short_errors_supported = yes; then
-	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libzstd" 2>&1`
+	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libzstd >= 1.4.0" 2>&1`
         else
-	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libzstd" 2>&1`
+	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libzstd >= 1.4.0" 2>&1`
         fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$ZSTD_PKG_ERRORS" >&5
diff --git a/binutils/configure b/binutils/configure
index 2e33584..6176d69 100755
--- a/binutils/configure
+++ b/binutils/configure
@@ -13536,19 +13536,19 @@ fi
 if test "$with_zstd" != no; then :
 
 pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libzstd" >&5
-$as_echo_n "checking for libzstd... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libzstd >= 1.4.0" >&5
+$as_echo_n "checking for libzstd >= 1.4.0... " >&6; }
 
 if test -n "$ZSTD_CFLAGS"; then
     pkg_cv_ZSTD_CFLAGS="$ZSTD_CFLAGS"
  elif test -n "$PKG_CONFIG"; then
     if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd >= 1.4.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libzstd >= 1.4.0") 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-  pkg_cv_ZSTD_CFLAGS=`$PKG_CONFIG --cflags "libzstd" 2>/dev/null`
+  pkg_cv_ZSTD_CFLAGS=`$PKG_CONFIG --cflags "libzstd >= 1.4.0" 2>/dev/null`
 		      test "x$?" != "x0" && pkg_failed=yes
 else
   pkg_failed=yes
@@ -13560,12 +13560,12 @@ if test -n "$ZSTD_LIBS"; then
     pkg_cv_ZSTD_LIBS="$ZSTD_LIBS"
  elif test -n "$PKG_CONFIG"; then
     if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd >= 1.4.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libzstd >= 1.4.0") 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-  pkg_cv_ZSTD_LIBS=`$PKG_CONFIG --libs "libzstd" 2>/dev/null`
+  pkg_cv_ZSTD_LIBS=`$PKG_CONFIG --libs "libzstd >= 1.4.0" 2>/dev/null`
 		      test "x$?" != "x0" && pkg_failed=yes
 else
   pkg_failed=yes
@@ -13610,9 +13610,9 @@ else
         _pkg_short_errors_supported=no
 fi
         if test $_pkg_short_errors_supported = yes; then
-	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libzstd" 2>&1`
+	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libzstd >= 1.4.0" 2>&1`
         else
-	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libzstd" 2>&1`
+	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libzstd >= 1.4.0" 2>&1`
         fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$ZSTD_PKG_ERRORS" >&5
diff --git a/config/zstd.m4 b/config/zstd.m4
index 6da4db6..eb34c0f 100644
--- a/config/zstd.m4
+++ b/config/zstd.m4
@@ -12,7 +12,7 @@ AC_ARG_WITH(zstd,
   [], [with_zstd=auto])
 
 AS_IF([test "$with_zstd" != no],
-  [PKG_CHECK_MODULES(ZSTD, [libzstd], [
+  [PKG_CHECK_MODULES(ZSTD, [libzstd >= 1.4.0], [
     AC_DEFINE(HAVE_ZSTD, 1, [Define to 1 if zstd is enabled.])
   ], [
     if test "$with_zstd" = yes; then
diff --git a/gas/configure b/gas/configure
index cae14c0..d9800f8 100755
--- a/gas/configure
+++ b/gas/configure
@@ -14135,19 +14135,19 @@ fi
 if test "$with_zstd" != no; then :
 
 pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libzstd" >&5
-$as_echo_n "checking for libzstd... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libzstd >= 1.4.0" >&5
+$as_echo_n "checking for libzstd >= 1.4.0... " >&6; }
 
 if test -n "$ZSTD_CFLAGS"; then
     pkg_cv_ZSTD_CFLAGS="$ZSTD_CFLAGS"
  elif test -n "$PKG_CONFIG"; then
     if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd >= 1.4.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libzstd >= 1.4.0") 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-  pkg_cv_ZSTD_CFLAGS=`$PKG_CONFIG --cflags "libzstd" 2>/dev/null`
+  pkg_cv_ZSTD_CFLAGS=`$PKG_CONFIG --cflags "libzstd >= 1.4.0" 2>/dev/null`
 		      test "x$?" != "x0" && pkg_failed=yes
 else
   pkg_failed=yes
@@ -14159,12 +14159,12 @@ if test -n "$ZSTD_LIBS"; then
     pkg_cv_ZSTD_LIBS="$ZSTD_LIBS"
  elif test -n "$PKG_CONFIG"; then
     if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd >= 1.4.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libzstd >= 1.4.0") 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-  pkg_cv_ZSTD_LIBS=`$PKG_CONFIG --libs "libzstd" 2>/dev/null`
+  pkg_cv_ZSTD_LIBS=`$PKG_CONFIG --libs "libzstd >= 1.4.0" 2>/dev/null`
 		      test "x$?" != "x0" && pkg_failed=yes
 else
   pkg_failed=yes
@@ -14209,9 +14209,9 @@ else
         _pkg_short_errors_supported=no
 fi
         if test $_pkg_short_errors_supported = yes; then
-	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libzstd" 2>&1`
+	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libzstd >= 1.4.0" 2>&1`
         else
-	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libzstd" 2>&1`
+	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libzstd >= 1.4.0" 2>&1`
         fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$ZSTD_PKG_ERRORS" >&5
diff --git a/gdb/configure b/gdb/configure
index 3367726..811a598 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -8283,19 +8283,19 @@ fi
 if test "$with_zstd" != no; then :
 
 pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libzstd" >&5
-$as_echo_n "checking for libzstd... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libzstd >= 1.4.0" >&5
+$as_echo_n "checking for libzstd >= 1.4.0... " >&6; }
 
 if test -n "$ZSTD_CFLAGS"; then
     pkg_cv_ZSTD_CFLAGS="$ZSTD_CFLAGS"
  elif test -n "$PKG_CONFIG"; then
     if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd >= 1.4.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libzstd >= 1.4.0") 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-  pkg_cv_ZSTD_CFLAGS=`$PKG_CONFIG --cflags "libzstd" 2>/dev/null`
+  pkg_cv_ZSTD_CFLAGS=`$PKG_CONFIG --cflags "libzstd >= 1.4.0" 2>/dev/null`
 		      test "x$?" != "x0" && pkg_failed=yes
 else
   pkg_failed=yes
@@ -8307,12 +8307,12 @@ if test -n "$ZSTD_LIBS"; then
     pkg_cv_ZSTD_LIBS="$ZSTD_LIBS"
  elif test -n "$PKG_CONFIG"; then
     if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd >= 1.4.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libzstd >= 1.4.0") 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-  pkg_cv_ZSTD_LIBS=`$PKG_CONFIG --libs "libzstd" 2>/dev/null`
+  pkg_cv_ZSTD_LIBS=`$PKG_CONFIG --libs "libzstd >= 1.4.0" 2>/dev/null`
 		      test "x$?" != "x0" && pkg_failed=yes
 else
   pkg_failed=yes
@@ -8357,9 +8357,9 @@ else
         _pkg_short_errors_supported=no
 fi
         if test $_pkg_short_errors_supported = yes; then
-	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libzstd" 2>&1`
+	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libzstd >= 1.4.0" 2>&1`
         else
-	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libzstd" 2>&1`
+	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libzstd >= 1.4.0" 2>&1`
         fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$ZSTD_PKG_ERRORS" >&5
diff --git a/ld/configure b/ld/configure
index 7906f52..7900045 100755
--- a/ld/configure
+++ b/ld/configure
@@ -17095,19 +17095,19 @@ fi
 if test "$with_zstd" != no; then :
 
 pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libzstd" >&5
-$as_echo_n "checking for libzstd... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libzstd >= 1.4.0" >&5
+$as_echo_n "checking for libzstd >= 1.4.0... " >&6; }
 
 if test -n "$ZSTD_CFLAGS"; then
     pkg_cv_ZSTD_CFLAGS="$ZSTD_CFLAGS"
  elif test -n "$PKG_CONFIG"; then
     if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd >= 1.4.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libzstd >= 1.4.0") 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-  pkg_cv_ZSTD_CFLAGS=`$PKG_CONFIG --cflags "libzstd" 2>/dev/null`
+  pkg_cv_ZSTD_CFLAGS=`$PKG_CONFIG --cflags "libzstd >= 1.4.0" 2>/dev/null`
 		      test "x$?" != "x0" && pkg_failed=yes
 else
   pkg_failed=yes
@@ -17119,12 +17119,12 @@ if test -n "$ZSTD_LIBS"; then
     pkg_cv_ZSTD_LIBS="$ZSTD_LIBS"
  elif test -n "$PKG_CONFIG"; then
     if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd >= 1.4.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libzstd >= 1.4.0") 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-  pkg_cv_ZSTD_LIBS=`$PKG_CONFIG --libs "libzstd" 2>/dev/null`
+  pkg_cv_ZSTD_LIBS=`$PKG_CONFIG --libs "libzstd >= 1.4.0" 2>/dev/null`
 		      test "x$?" != "x0" && pkg_failed=yes
 else
   pkg_failed=yes
@@ -17169,9 +17169,9 @@ else
         _pkg_short_errors_supported=no
 fi
         if test $_pkg_short_errors_supported = yes; then
-	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libzstd" 2>&1`
+	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libzstd >= 1.4.0" 2>&1`
         else
-	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libzstd" 2>&1`
+	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libzstd >= 1.4.0" 2>&1`
         fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$ZSTD_PKG_ERRORS" >&5
diff --git a/libctf/configure b/libctf/configure
index 176b3d6..a5c5817 100755
--- a/libctf/configure
+++ b/libctf/configure
@@ -13073,19 +13073,19 @@ fi
 if test "$with_zstd" != no; then :
 
 pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libzstd" >&5
-$as_echo_n "checking for libzstd... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for libzstd >= 1.4.0" >&5
+$as_echo_n "checking for libzstd >= 1.4.0... " >&6; }
 
 if test -n "$ZSTD_CFLAGS"; then
     pkg_cv_ZSTD_CFLAGS="$ZSTD_CFLAGS"
  elif test -n "$PKG_CONFIG"; then
     if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd >= 1.4.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libzstd >= 1.4.0") 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-  pkg_cv_ZSTD_CFLAGS=`$PKG_CONFIG --cflags "libzstd" 2>/dev/null`
+  pkg_cv_ZSTD_CFLAGS=`$PKG_CONFIG --cflags "libzstd >= 1.4.0" 2>/dev/null`
 		      test "x$?" != "x0" && pkg_failed=yes
 else
   pkg_failed=yes
@@ -13097,12 +13097,12 @@ if test -n "$ZSTD_LIBS"; then
     pkg_cv_ZSTD_LIBS="$ZSTD_LIBS"
  elif test -n "$PKG_CONFIG"; then
     if test -n "$PKG_CONFIG" && \
-    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd\""; } >&5
-  ($PKG_CONFIG --exists --print-errors "libzstd") 2>&5
+    { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libzstd >= 1.4.0\""; } >&5
+  ($PKG_CONFIG --exists --print-errors "libzstd >= 1.4.0") 2>&5
   ac_status=$?
   $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
   test $ac_status = 0; }; then
-  pkg_cv_ZSTD_LIBS=`$PKG_CONFIG --libs "libzstd" 2>/dev/null`
+  pkg_cv_ZSTD_LIBS=`$PKG_CONFIG --libs "libzstd >= 1.4.0" 2>/dev/null`
 		      test "x$?" != "x0" && pkg_failed=yes
 else
   pkg_failed=yes
@@ -13147,9 +13147,9 @@ else
         _pkg_short_errors_supported=no
 fi
         if test $_pkg_short_errors_supported = yes; then
-	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libzstd" 2>&1`
+	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libzstd >= 1.4.0" 2>&1`
         else
-	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libzstd" 2>&1`
+	        ZSTD_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libzstd >= 1.4.0" 2>&1`
         fi
 	# Put the nasty error message in config.log where it belongs
 	echo "$ZSTD_PKG_ERRORS" >&5