# Makefile.in generated by automake 1.14.1 from Makefile.am. # @configure_input@ # Copyright (C) 1994-2013 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # Copyright (C) 1992-2019, 2020 Free Software Foundation, Inc. # # This file is part of DejaGnu. # # DejaGnu is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 3 of the License, or # (at your option) any later version. # # DejaGnu is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with DejaGnu; if not, write to the Free Software Foundation, # Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. # Process this file with automake to generate Makefile.in VPATH = @srcdir@ am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : check_PROGRAMS = unit$(EXEEXT) subdir = . DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \ $(srcdir)/Makefile.in $(srcdir)/Makefile.am \ $(top_srcdir)/configure $(am__configure_deps) depcomp \ $(doc_dejagnu_TEXINFOS) mdate-sh $(srcdir)/doc/version.texi \ $(srcdir)/doc/stamp-vti $(dist_man_MANS) $(include_HEADERS) \ COPYING TODO compile config.guess config.sub install-sh \ missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = CONFIG_CLEAN_VPATH_FILES = am__dirstamp = $(am__leading_dot)dirstamp am_unit_OBJECTS = testsuite/libdejagnu/unit.$(OBJEXT) unit_OBJECTS = $(am_unit_OBJECTS) unit_LDADD = $(LDADD) am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; am__install_max = 40 am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done | \ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' am__uninstall_files_from_dir = { \ test -z "$$files" \ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(djlibexecdir)" \ "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \ "$(DESTDIR)$(baseboarddir)" "$(DESTDIR)$(commandsdir)" \ "$(DESTDIR)$(configdir)" "$(DESTDIR)$(pkgdatadir)" \ "$(DESTDIR)$(includedir)" SCRIPTS = $(bin_SCRIPTS) $(djlibexec_SCRIPTS) AM_V_P = $(am__v_P_@AM_V@) am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_@AM_V@) am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_@AM_V@) am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) am__v_at_0 = @ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) AM_V_CXX = $(am__v_CXX_@AM_V@) am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@) am__v_CXX_0 = @echo " CXX " $@; am__v_CXX_1 = CXXLD = $(CXX) CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \ -o $@ AM_V_CXXLD = $(am__v_CXXLD_@AM_V@) am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@) am__v_CXXLD_0 = @echo " CXXLD " $@; am__v_CXXLD_1 = SOURCES = $(unit_SOURCES) DIST_SOURCES = $(unit_SOURCES) AM_V_DVIPS = $(am__v_DVIPS_@AM_V@) am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@) am__v_DVIPS_0 = @echo " DVIPS " $@; am__v_DVIPS_1 = AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@) am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@) am__v_MAKEINFO_0 = @echo " MAKEINFO" $@; am__v_MAKEINFO_1 = AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@) am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@) am__v_INFOHTML_0 = @echo " INFOHTML" $@; am__v_INFOHTML_1 = AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@) am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@) am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@; am__v_TEXI2DVI_1 = AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@) am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@) am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@; am__v_TEXI2PDF_1 = AM_V_texinfo = $(am__v_texinfo_@AM_V@) am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@) am__v_texinfo_0 = -q am__v_texinfo_1 = AM_V_texidevnull = $(am__v_texidevnull_@AM_V@) am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@) am__v_texidevnull_0 = > /dev/null am__v_texidevnull_1 = INFO_DEPS = $(srcdir)/doc/dejagnu.info am__TEXINFO_TEX_DIR = $(srcdir)/doc DVIS = doc/dejagnu.dvi PDFS = doc/dejagnu.pdf PSS = doc/dejagnu.ps HTMLS = doc/dejagnu.html TEXINFOS = doc/dejagnu.texi TEXI2DVI = texi2dvi TEXI2PDF = $(TEXI2DVI) --pdf --batch MAKEINFOHTML = $(MAKEINFO) --html AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) DVIPS = dvips am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac man1dir = $(mandir)/man1 NROFF = nroff MANS = $(dist_man_MANS) DATA = $(baseboard_DATA) $(commands_DATA) $(config_DATA) \ $(pkgdata_DATA) HEADERS = $(include_HEADERS) am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # *not* preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | $(am__uniquify_input)` ETAGS = etags CTAGS = ctags CSCOPE = cscope AM_RECURSIVE_TARGETS = cscope RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir EXPECT = expect DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ || { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) DIST_ARCHIVES = $(distdir).tar.gz GZIP_ENV = --best DIST_TARGETS = dist-gzip distuninstallcheck_listfiles = find . -type f -print am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' distcleancheck_listfiles = find . -type f -print ACLOCAL = @ACLOCAL@ AMTAR = @AMTAR@ AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DEFS = @DEFS@ DEJAGNU = @DEJAGNU@ DEPDIR = @DEPDIR@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EXEEXT = @EXEEXT@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAKEINFO = @MAKEINFO@ MKDIR_P = @MKDIR_P@ OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_URL = @PACKAGE_URL@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ STRIP = @STRIP@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ abs_top_builddir = @abs_top_builddir@ abs_top_srcdir = @abs_top_srcdir@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build_alias = @build_alias@ builddir = @builddir@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host_alias = @host_alias@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ srcdir = @srcdir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ AUTOMAKE_OPTIONS = dejagnu EXTRA_DIST = ChangeLog-1992 MAINTAINERS dejagnu runtest \ $(pkgdata_DATA) $(config_DATA) $(baseboard_DATA) \ $(commands_DATA) $(TESTSUITE_FILES) $(TEXINFO_TEX)\ $(CONTRIB) CLEANFILES = dbg.log nested-init.exp bin_SCRIPTS = dejagnu runtest include_HEADERS = dejagnu.h pkgdata_DATA = \ stub-loader.c \ testglue.c \ runtest.exp \ lib/debugger.exp \ lib/dejagnu.exp \ lib/dg.exp \ lib/dmucs.exp \ lib/framework.exp \ lib/ftp.exp \ lib/kermit.exp \ lib/libgloss.exp \ lib/remote.exp \ lib/rlogin.exp \ lib/rsh.exp \ lib/ssh.exp \ lib/standard.exp \ lib/target.exp \ lib/targetdb.exp \ lib/telnet.exp \ lib/tip.exp \ lib/utils.exp commandsdir = $(pkgdatadir)/commands commands_DATA = \ commands/help.sh \ commands/report-card.awk configdir = $(pkgdatadir)/config config_DATA = \ config/README \ config/adb.exp \ config/aarch64-fv8.exp \ config/default.exp \ config/gdb-comm.exp \ config/gdb_stub.exp \ config/sid.exp \ config/sim.exp \ config/unix.exp \ config/vxworks.exp baseboarddir = $(pkgdatadir)/baseboards baseboard_DATA = \ baseboards/README \ baseboards/aarch64-sim.exp \ baseboards/am33_2.0-libremote.exp \ baseboards/androideabi.exp \ baseboards/arm-ice.exp \ baseboards/arm-sid.exp \ baseboards/arm-sim.exp \ baseboards/basic-sid.exp \ baseboards/basic-sim.exp \ baseboards/cris-sim.exp \ baseboards/d30v-sim.exp \ baseboards/fr30-sim.exp \ baseboards/frv-sim.exp \ baseboards/gdbserver-sample.exp \ baseboards/generic-sim.exp \ baseboards/i386-sid.exp \ baseboards/iq2000-sim.exp \ baseboards/jmr3904-sim.exp \ baseboards/linux-gdbserver.exp \ baseboards/linux-libremote.exp \ baseboards/m68k-sid.exp \ baseboards/mcore-moto-sim.exp \ baseboards/mcore-sim.exp \ baseboards/mips-lnews-sim.exp \ baseboards/mips-lsi-sim.exp \ baseboards/mips-sim-idt32.exp \ baseboards/mips-sim-idt64.exp \ baseboards/mips-sim-mti32.exp \ baseboards/mips-sim-mti64.exp \ baseboards/mips-sim-mti64_64.exp \ baseboards/mips-sim-mti64_n32.exp \ baseboards/mips-sim-sde32.exp \ baseboards/mips-sim-sde64.exp \ baseboards/mips-sim.exp \ baseboards/mmixware-sim.exp \ baseboards/mn10200-sim.exp \ baseboards/mn10300-sim.exp \ baseboards/moxie-sim.exp \ baseboards/msp430-sim.exp \ baseboards/mt-sid.exp \ baseboards/multi-sim.exp \ baseboards/pi.exp \ baseboards/powerpc-sim.exp \ baseboards/powerpcle-sim.exp \ baseboards/pru-sim.exp \ baseboards/qemu.exp \ baseboards/riscv-sim.exp \ baseboards/rx-sim.exp \ baseboards/sh-sid.exp \ baseboards/sh-sim.exp \ baseboards/sparc-sim.exp \ baseboards/sparc64-sim.exp \ baseboards/sparclite-sim-le.exp \ baseboards/sparclite-sim.exp \ baseboards/tx39-sim.exp \ baseboards/unix.exp \ baseboards/v850-sim.exp \ baseboards/visium-sim.exp \ baseboards/vr4100-sim.exp \ baseboards/vr4111-sim.exp \ baseboards/vr4300-sim.exp \ baseboards/xtensa-sim.exp djlibexecdir = $(pkgdatadir)/libexec djlibexec_SCRIPTS = config.guess # Contributed scripts, etc. CONTRIB = contrib/sum2junit.sh \ contrib/mysql/create-db.sql contrib/mysql/importxml.sh \ contrib/mysql/make-datafile.sh contrib/mysql/plot.sh \ contrib/mysql/README contrib/mysql/sum2xml.sh \ contrib/dejagnu.py # Testsuite. TESTSUITE_FILES = \ testsuite/launcher.all/command.exp \ testsuite/launcher.all/command/commands/bar-baz.awk \ testsuite/launcher.all/command/commands/bar.awk \ testsuite/launcher.all/command/commands/bar.sh \ testsuite/launcher.all/command/commands/baz-quux.gawk \ testsuite/launcher.all/command/commands/foo.sh \ testsuite/launcher.all/command/commands/foo.tcl \ testsuite/launcher.all/help.exp \ testsuite/launcher.all/interp.exp \ testsuite/launcher.all/verbose.exp \ testsuite/report-card.all/onetest.exp \ testsuite/report-card.all/passes.exp \ testsuite/runtest.libs/topdir/subdir1/subsubdir1/subsubfile1 \ testsuite/runtest.libs/topdir/subdir1/subfile1 \ testsuite/runtest.libs/topdir/subdir1/subfile2 \ testsuite/runtest.libs/topdir/subdir2/subfile2 \ testsuite/runtest.libs/libs.exp \ testsuite/runtest.libs/default_procs.tcl \ testsuite/runtest.libs/mockutil.tcl \ testsuite/runtest.libs/clone_output.test \ testsuite/runtest.libs/config.test \ testsuite/runtest.libs/remote.test \ testsuite/runtest.libs/target.test \ testsuite/runtest.libs/testcase_group.test \ testsuite/runtest.libs/testsuite_can.test \ testsuite/runtest.libs/testsuite_file.test \ testsuite/runtest.libs/utils.test \ testsuite/runtest.main/error.exp \ testsuite/runtest.main/nested/testsuite/error.test/error-al-dbz.exp \ testsuite/runtest.main/nested/testsuite/error.test/error-dbz.exp \ testsuite/runtest.main/nested/testsuite/error.test/error-undef.exp \ testsuite/runtest.main/nested/testsuite/error.test/simple.exp \ testsuite/runtest.main/options.exp \ testsuite/runtest.main/nested/testsuite/null.test/null.exp \ testsuite/runtest.main/stats.exp \ testsuite/runtest.main/nested/testsuite/stat.test/stats-sub.exp \ testsuite/runtest.main/nested/testsuite/stat.test/unit-sub.awk \ testsuite/runtest.main/nested/testsuite/stat.test/unit-sub.exp \ testsuite/runtest.main/pr42399.exp \ testsuite/runtest.main/nested/testsuite/bug.test/pr42399.awk \ testsuite/runtest.main/nested/testsuite/bug.test/pr42399-sub.exp \ testsuite/lib/bohman_ssd.exp \ testsuite/lib/launcher.exp \ testsuite/lib/libdejagnu.exp \ testsuite/lib/libsup.exp \ testsuite/lib/report-card.exp \ testsuite/lib/runtest.exp \ testsuite/lib/util-defs.exp \ testsuite/libdejagnu/tunit.exp DEJATOOL = launcher libdejagnu report-card runtest # We override runtest so that the testsuite is run with this version # of DejaGnu instead of an installed version. RUNTEST = ${top_srcdir}/runtest AM_CXXFLAGS = -I$(top_srcdir) -g unit_SOURCES = testsuite/libdejagnu/unit.cc # Documentation. TEXINFO_TEX = doc/texinfo.tex dist_man_MANS = doc/dejagnu.1 \ doc/dejagnu-help.1 \ doc/dejagnu-report-card.1 \ doc/runtest.1 info_TEXINFOS = doc/dejagnu.texi doc_dejagnu_TEXINFOS = doc/fdl.texi all: all-am .SUFFIXES: .SUFFIXES: .cc .dvi .o .obj .ps am--refresh: Makefile @: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) $(am__cd) $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) $(am__aclocal_m4_deps): clean-checkPROGRAMS: -test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS) testsuite/libdejagnu/$(am__dirstamp): @$(MKDIR_P) testsuite/libdejagnu @: > testsuite/libdejagnu/$(am__dirstamp) testsuite/libdejagnu/$(DEPDIR)/$(am__dirstamp): @$(MKDIR_P) testsuite/libdejagnu/$(DEPDIR) @: > testsuite/libdejagnu/$(DEPDIR)/$(am__dirstamp) testsuite/libdejagnu/unit.$(OBJEXT): \ testsuite/libdejagnu/$(am__dirstamp) \ testsuite/libdejagnu/$(DEPDIR)/$(am__dirstamp) unit$(EXEEXT): $(unit_OBJECTS) $(unit_DEPENDENCIES) $(EXTRA_unit_DEPENDENCIES) @rm -f unit$(EXEEXT) $(AM_V_CXXLD)$(CXXLINK) $(unit_OBJECTS) $(unit_LDADD) $(LIBS) install-binSCRIPTS: $(bin_SCRIPTS) @$(NORMAL_INSTALL) @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n' \ -e 'h;s|.*|.|' \ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ if (++n[d] == $(am__install_max)) { \ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ else { print "f", d "/" $$4, $$1 } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ } \ ; done uninstall-binSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 's,.*/,,;$(transform)'`; \ dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir) install-djlibexecSCRIPTS: $(djlibexec_SCRIPTS) @$(NORMAL_INSTALL) @list='$(djlibexec_SCRIPTS)'; test -n "$(djlibexecdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(djlibexecdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(djlibexecdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ done | \ sed -e 'p;s,.*/,,;n' \ -e 'h;s|.*|.|' \ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ if (++n[d] == $(am__install_max)) { \ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ else { print "f", d "/" $$4, $$1 } } \ END { for (d in files) print "f", d, files[d] }' | \ while read type dir files; do \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" || { \ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(djlibexecdir)$$dir'"; \ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(djlibexecdir)$$dir" || exit $$?; \ } \ ; done uninstall-djlibexecSCRIPTS: @$(NORMAL_UNINSTALL) @list='$(djlibexec_SCRIPTS)'; test -n "$(djlibexecdir)" || exit 0; \ files=`for p in $$list; do echo "$$p"; done | \ sed -e 's,.*/,,;$(transform)'`; \ dir='$(DESTDIR)$(djlibexecdir)'; $(am__uninstall_files_from_dir) mostlyclean-compile: -rm -f *.$(OBJEXT) -rm -f testsuite/libdejagnu/*.$(OBJEXT) distclean-compile: -rm -f *.tab.c @AMDEP_TRUE@@am__include@ @am__quote@testsuite/libdejagnu/$(DEPDIR)/unit.Po@am__quote@ .cc.o: @am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\ @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\ @am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $< .cc.obj: @am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\ @am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\ @am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po @AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ @am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` doc/$(am__dirstamp): @$(MKDIR_P) doc @: > doc/$(am__dirstamp) $(srcdir)/doc/dejagnu.info: doc/dejagnu.texi $(srcdir)/doc/version.texi $(doc_dejagnu_TEXINFOS) $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \ am__cwd=`pwd` && $(am__cd) $(srcdir) && \ rm -rf $$backupdir && mkdir $$backupdir && \ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ cd "$$am__cwd"; \ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \ -o $@ $(srcdir)/doc/dejagnu.texi; \ then \ rc=0; \ $(am__cd) $(srcdir); \ else \ rc=$$?; \ $(am__cd) $(srcdir) && \ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \ fi; \ rm -rf $$backupdir; exit $$rc doc/dejagnu.dvi: doc/dejagnu.texi $(srcdir)/doc/version.texi $(doc_dejagnu_TEXINFOS) doc/$(am__dirstamp) $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \ $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \ `test -f 'doc/dejagnu.texi' || echo '$(srcdir)/'`doc/dejagnu.texi doc/dejagnu.pdf: doc/dejagnu.texi $(srcdir)/doc/version.texi $(doc_dejagnu_TEXINFOS) doc/$(am__dirstamp) $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \ $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \ `test -f 'doc/dejagnu.texi' || echo '$(srcdir)/'`doc/dejagnu.texi doc/dejagnu.html: doc/dejagnu.texi $(srcdir)/doc/version.texi $(doc_dejagnu_TEXINFOS) doc/$(am__dirstamp) $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp) $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \ -o $(@:.html=.htp) `test -f 'doc/dejagnu.texi' || echo '$(srcdir)/'`doc/dejagnu.texi; \ then \ rm -rf $@ && mv $(@:.html=.htp) $@; \ else \ rm -rf $(@:.html=.htp); exit 1; \ fi $(srcdir)/doc/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/doc/stamp-vti $(srcdir)/doc/stamp-vti: doc/dejagnu.texi $(top_srcdir)/configure @test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp) @(dir=.; test -f ./doc/dejagnu.texi || dir=$(srcdir); \ set `$(SHELL) $(srcdir)/mdate-sh $$dir/doc/dejagnu.texi`; \ echo "@set UPDATED $$1 $$2 $$3"; \ echo "@set UPDATED-MONTH $$2 $$3"; \ echo "@set EDITION $(VERSION)"; \ echo "@set VERSION $(VERSION)") > vti.tmp @cmp -s vti.tmp $(srcdir)/doc/version.texi \ || (echo "Updating $(srcdir)/doc/version.texi"; \ cp vti.tmp $(srcdir)/doc/version.texi) -@rm -f vti.tmp @cp $(srcdir)/doc/version.texi $@ mostlyclean-vti: -rm -f vti.tmp maintainer-clean-vti: @MAINTAINER_MODE_TRUE@ -rm -f $(srcdir)/doc/stamp-vti $(srcdir)/doc/version.texi .dvi.ps: $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ $(DVIPS) $(AM_V_texinfo) -o $@ $< uninstall-dvi-am: @$(NORMAL_UNINSTALL) @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \ rm -f "$(DESTDIR)$(dvidir)/$$f"; \ done uninstall-html-am: @$(NORMAL_UNINSTALL) @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \ rm -rf "$(DESTDIR)$(htmldir)/$$f"; \ done uninstall-info-am: @$(PRE_UNINSTALL) @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \ done; \ else :; fi @$(NORMAL_UNINSTALL) @list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \ (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ else :; fi); \ done uninstall-pdf-am: @$(NORMAL_UNINSTALL) @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \ rm -f "$(DESTDIR)$(pdfdir)/$$f"; \ done uninstall-ps-am: @$(NORMAL_UNINSTALL) @list='$(PSS)'; test -n "$(psdir)" || list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \ rm -f "$(DESTDIR)$(psdir)/$$f"; \ done dist-info: $(INFO_DEPS) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; \ for base in $$list; do \ case $$base in \ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$base; then d=.; else d=$(srcdir); fi; \ base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \ for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \ if test -f $$file; then \ relfile=`expr "$$file" : "$$d/\(.*\)"`; \ test -f "$(distdir)/$$relfile" || \ cp -p $$file "$(distdir)/$$relfile"; \ else :; fi; \ done; \ done mostlyclean-aminfo: -rm -rf doc/dejagnu.t2d doc/dejagnu.t2p clean-aminfo: -test -z "doc/dejagnu.dvi doc/dejagnu.pdf doc/dejagnu.ps doc/dejagnu.html" \ || rm -rf doc/dejagnu.dvi doc/dejagnu.pdf doc/dejagnu.ps doc/dejagnu.html maintainer-clean-aminfo: @list='$(INFO_DEPS)'; for i in $$list; do \ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ done install-man1: $(dist_man_MANS) @$(NORMAL_INSTALL) @list1=''; \ list2='$(dist_man_MANS)'; \ test -n "$(man1dir)" \ && test -n "`echo $$list1$$list2`" \ || exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ { for i in $$list1; do echo "$$i"; done; \ if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ | sed -n '/\.1[a-z]*$$/p'; \ fi; \ } | while read p; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done | \ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ sed 'N;N;s,\n, ,g' | { \ list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done | $(am__base_list) | \ while read files; do \ test -z "$$files" || { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ done; } uninstall-man1: @$(NORMAL_UNINSTALL) @list=''; test -n "$(man1dir)" || exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \ sed -n '/\.1[a-z]*$$/p'; \ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) install-baseboardDATA: $(baseboard_DATA) @$(NORMAL_INSTALL) @list='$(baseboard_DATA)'; test -n "$(baseboarddir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(baseboarddir)'"; \ $(MKDIR_P) "$(DESTDIR)$(baseboarddir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(baseboarddir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(baseboarddir)" || exit $$?; \ done uninstall-baseboardDATA: @$(NORMAL_UNINSTALL) @list='$(baseboard_DATA)'; test -n "$(baseboarddir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(baseboarddir)'; $(am__uninstall_files_from_dir) install-commandsDATA: $(commands_DATA) @$(NORMAL_INSTALL) @list='$(commands_DATA)'; test -n "$(commandsdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(commandsdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(commandsdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(commandsdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(commandsdir)" || exit $$?; \ done uninstall-commandsDATA: @$(NORMAL_UNINSTALL) @list='$(commands_DATA)'; test -n "$(commandsdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(commandsdir)'; $(am__uninstall_files_from_dir) install-configDATA: $(config_DATA) @$(NORMAL_INSTALL) @list='$(config_DATA)'; test -n "$(configdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(configdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(configdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(configdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(configdir)" || exit $$?; \ done uninstall-configDATA: @$(NORMAL_UNINSTALL) @list='$(config_DATA)'; test -n "$(configdir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(configdir)'; $(am__uninstall_files_from_dir) install-pkgdataDATA: $(pkgdata_DATA) @$(NORMAL_INSTALL) @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \ done uninstall-pkgdataDATA: @$(NORMAL_UNINSTALL) @list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir) install-includeHEADERS: $(include_HEADERS) @$(NORMAL_INSTALL) @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ done uninstall-includeHEADERS: @$(NORMAL_UNINSTALL) @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique tags: tags-am TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) set x; \ here=`pwd`; \ $(am__define_uniq_tagged_files); \ shift; \ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ctags: ctags-am CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ test -z "$(CTAGS_ARGS)$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" cscope: cscope.files test ! -s cscope.files \ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist cscopelist: cscopelist-am cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ *) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files check-DEJAGNU: site.exp srcdir='$(srcdir)'; export srcdir; \ EXPECT=$(EXPECT); export EXPECT; \ if $(SHELL) -c "$(RUNTEST) --version" > /dev/null 2>&1; then \ exit_status=0; l='$(DEJATOOL)'; for tool in $$l; do \ if $(RUNTEST) $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \ then :; else exit_status=1; fi; \ done; \ else echo "WARNING: could not find '$(RUNTEST)'" 1>&2; :;\ fi; \ exit $$exit_status site.exp: Makefile $(EXTRA_DEJAGNU_SITE_CONFIG) @echo 'Making a new site.exp file ...' @echo '## these variables are automatically generated by make ##' >site.tmp @echo '# Do not edit here. If you wish to override these values' >>site.tmp @echo '# edit the last section' >>site.tmp @echo 'set srcdir "$(srcdir)"' >>site.tmp @echo "set objdir `pwd`" >>site.tmp @list='$(EXTRA_DEJAGNU_SITE_CONFIG)'; for f in $$list; do \ echo "## Begin content included from file $$f. Do not modify. ##" \ && cat `test -f "$$f" || echo '$(srcdir)/'`$$f \ && echo "## End content included from file $$f. ##" \ || exit 1; \ done >> site.tmp @echo "## End of auto-generated content; you can edit from here. ##" >> site.tmp @if test -f site.exp; then \ sed -e '1,/^## End of auto-generated content.*##/d' site.exp >> site.tmp; \ fi @-rm -f site.bak @test ! -f site.exp || mv site.exp site.bak @mv site.tmp site.exp distclean-DEJAGNU: -rm -f site.exp site.bak -l='$(DEJATOOL)'; for tool in $$l; do \ rm -f $$tool.sum $$tool.log; \ done distdir: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-info -test -n "$(am__skip_mode_fix)" \ || find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) dist-lzip: distdir tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) dist-xz: distdir tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) dist-tarZ: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__post_remove_distdir) dist-shar: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ *.tar.xz*) \ xz -dc $(distdir).tar.xz | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_inst chmod a-w $(distdir) test -d $(distdir)/_build || exit 0; \ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && am__cwd=`pwd` \ && $(am__cd) $(distdir)/_build \ && ../configure \ $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ --srcdir=.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ && cd "$$am__cwd" \ || exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' || { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' || { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU check: check-am all-am: Makefile $(INFO_DEPS) $(SCRIPTS) $(MANS) $(DATA) $(HEADERS) \ all-local installdirs: for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(djlibexecdir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(baseboarddir)" "$(DESTDIR)$(commandsdir)" "$(DESTDIR)$(configdir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(includedir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -rm -f doc/$(am__dirstamp) -rm -f testsuite/libdejagnu/$(DEPDIR)/$(am__dirstamp) -rm -f testsuite/libdejagnu/$(am__dirstamp) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-aminfo clean-checkPROGRAMS clean-generic clean-local \ mostlyclean-am distclean: distclean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf testsuite/libdejagnu/$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-DEJAGNU distclean-compile \ distclean-generic distclean-tags dvi: dvi-am dvi-am: $(DVIS) html: html-am html-am: $(HTMLS) info: info-am info-am: $(INFO_DEPS) install-data-am: install-baseboardDATA install-commandsDATA \ install-configDATA install-includeHEADERS install-info-am \ install-man install-pkgdataDATA install-dvi: install-dvi-am install-dvi-am: $(DVIS) @$(NORMAL_INSTALL) @list='$(DVIS)'; test -n "$(dvidir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \ $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \ done install-exec-am: install-binSCRIPTS install-djlibexecSCRIPTS install-html: install-html-am install-html-am: $(HTMLS) @$(NORMAL_INSTALL) @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \ $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \ $(am__strip_dir) \ d2=$$d$$p; \ if test -d "$$d2"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \ echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \ $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \ else \ list2="$$list2 $$d2"; \ fi; \ done; \ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \ done; } install-info: install-info-am install-info-am: $(INFO_DEPS) @$(NORMAL_INSTALL) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \ $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \ fi; \ for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ esac; \ if test -f $$file; then d=.; else d=$(srcdir); fi; \ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ if test -f $$ifile; then \ echo "$$ifile"; \ else : ; fi; \ done; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done @$(POST_INSTALL) @if $(am__can_run_installinfo); then \ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \ for file in $$list; do \ relfile=`echo "$$file" | sed 's|^.*/||'`; \ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\ done; \ else : ; fi install-man: install-man1 install-pdf: install-pdf-am install-pdf-am: $(PDFS) @$(NORMAL_INSTALL) @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done install-ps: install-ps-am install-ps-am: $(PSS) @$(NORMAL_INSTALL) @list='$(PSS)'; test -n "$(psdir)" || list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done | $(am__base_list) | \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done installcheck-am: maintainer-clean: maintainer-clean-am -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -rf testsuite/libdejagnu/$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-aminfo \ maintainer-clean-generic maintainer-clean-vti mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \ mostlyclean-generic mostlyclean-vti pdf: pdf-am pdf-am: $(PDFS) ps: ps-am ps-am: $(PSS) uninstall-am: uninstall-baseboardDATA uninstall-binSCRIPTS \ uninstall-commandsDATA uninstall-configDATA \ uninstall-djlibexecSCRIPTS uninstall-dvi-am uninstall-html-am \ uninstall-includeHEADERS uninstall-info-am uninstall-man \ uninstall-pdf-am uninstall-pkgdataDATA uninstall-ps-am uninstall-man: uninstall-man1 .MAKE: check-am install-am install-strip .PHONY: CTAGS GTAGS TAGS all all-am all-local am--refresh check \ check-DEJAGNU check-am clean clean-aminfo clean-checkPROGRAMS \ clean-cscope clean-generic clean-local cscope cscopelist-am \ ctags ctags-am dist dist-all dist-bzip2 dist-gzip dist-info \ dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \ distclean distclean-DEJAGNU distclean-compile \ distclean-generic distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-baseboardDATA install-binSCRIPTS \ install-commandsDATA install-configDATA install-data \ install-data-am install-djlibexecSCRIPTS install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-includeHEADERS install-info \ install-info-am install-man install-man1 install-pdf \ install-pdf-am install-pkgdataDATA install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-aminfo \ maintainer-clean-generic maintainer-clean-vti mostlyclean \ mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \ mostlyclean-vti pdf pdf-am ps ps-am tags tags-am uninstall \ uninstall-am uninstall-baseboardDATA uninstall-binSCRIPTS \ uninstall-commandsDATA uninstall-configDATA \ uninstall-djlibexecSCRIPTS uninstall-dvi-am uninstall-html-am \ uninstall-includeHEADERS uninstall-info-am uninstall-man \ uninstall-man1 uninstall-pdf-am uninstall-pkgdataDATA \ uninstall-ps-am export DEJAGNU clean-local: clean-local-check .PHONY: clean-local-check clean-local-check: -rm -rf testsuite/launcher.all/command/bin -rm -rf testsuite/launcher.all/command/share -rm -rf testsuite/report-card.all/onetest -rm -rf testsuite/report-card.all/passes # Give a reassuring message so that users know the "build" worked. all-local: @echo "Done. Now run 'make install'." pip-install: pip3 install --upgrade -e $(top_srcdir) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: