| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It was observed that in a multi-threaded application on GNU/Linux,
that if the user has set the SIGSTOP to be pass (using GDB's handle
command) then the inferior would hang upon hitting a breakpoint.
What happens is that when a thread hits the breakpoint GDB tries to
stop all of the other threads by sending them a SIGSTOP and setting
the stop_requested flag in the target_ops structure - this can be seen
in infrun.c:stop_all_threads.
GDB then waits for all of the other threads to stop.
When the SIGSTOP event arrives we eventually end up in
linux-nat.c:linux_nat_filter_event, which has the job of deciding if
the event we're looking at (the SIGSTOP arriving in this case) is
something that should be reported back to the core of GDB.
One of the final actions of this function is to check if we stopped
due to a signal, and if we did, and the signal has been set to 'pass'
by the user then we ignore the event and resume the thread.
This code already has some conditions in place that mean the event is
reported to GDB even if the signal is in the set of signals to be
passed to the inferior.
In this commit I extend this condition such that:
If the signal is a SIGSTOP, and the thread's stop_requested flag is
set (indicating we're waiting for the thread to stop with a SIGSTOP)
then we should report this SIGSTOP to GDB and not pass it to the
inferior.
With this change in place the test now passes. Regression tested on
x86-64 GNU/Linux with no regressions.
gdb/ChangeLog:
* linux-nat.c (linux_nat_filter_event): Don't ignore SIGSTOP if we
have just sent the thread a SIGSTOP and are waiting for it to
arrive.
gdb/testsuite/ChangeLog:
* gdb.threads/stop-with-handle.c: New file.
* gdb.threads/stop-with-handle.exp: New file.
|
|
With gcc 4.8.1, we see this FAIL:
...
(gdb) PASS: gdb.base/list-missing-source.exp: list
info source^M
Current source file is outputs/gdb.base/list-missing-source/main.c^M
Source language is c.^M
Producer is GNU C 4.8.5 -mtune=generic -march=x86-64 -g -fno-stack-protector.^M
Compiled with DWARF 2 debugging format.^M
Does not include preprocessor macro info.^M
(gdb) FAIL: gdb.base/list-missing-source.exp: info source
...
The problem is that a "Compilation directory is <dir>" line is expected, but
this is missing due to the fact the the compilation unit for main.c doesn't
contain a DW_AT_comp_dir in the DW_TAG_compile_unit DIE.
Fix this by allowing the "Compilation directory" line to be missing.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-10-03 Tom de Vries <tdevries@suse.de>
PR testsuite/25059
* gdb.base/list-missing-source.exp: Allowing the "Compilation
directory" line to be missing.
|
|
The gdb.base/info-types.exp test-case FAILs with gcc/g++ 4.8 because the DWARF
record for the 'unsigned int' type is missing in the executables, while it is
present for gcc/g++ 7.4.1.
For a minimal example using gcc 7.4.1:
...
$ echo "enum enum_t { AA, BB, CC }; enum enum_t var;" > enum.c
$ gcc enum.c -c -g
...
we find that the enum type has DW_AT_encoding 'unsigned':
<1><1d>: Abbrev Number: 2 (DW_TAG_enumeration_type)
<1e> DW_AT_name : (indirect string, offset: 0x1f): enum_t
<22> DW_AT_encoding : 7 (unsigned)
<23> DW_AT_byte_size : 4
<24> DW_AT_type : <0x3e>
<28> DW_AT_decl_file : 1
<29> DW_AT_decl_line : 1
<2a> DW_AT_sibling : <0x3e>
...
and a DW_AT_type reference to the type 'unsigned int':
...
<1><3e>: Abbrev Number: 4 (DW_TAG_base_type)
<3f> DW_AT_byte_size : 4
<40> DW_AT_encoding : 7 (unsigned)
<41> DW_AT_name : (indirect string, offset: 0x26): unsigned int
...
With gcc 4.8.5 however, we have no 'unsigned' encoding, and no DW_AT_type:
...
<1><1d>: Abbrev Number: 2 (DW_TAG_enumeration_type)
<1e> DW_AT_name : (indirect string, offset: 0x1f): enum_t
<22> DW_AT_byte_size : 4
<23> DW_AT_decl_file : 1
<24> DW_AT_decl_line : 1
<25> DW_AT_sibling : <0x39>
...
as well as no record for 'unsigned int'.
Make the test-case pass with gcc/g++ 4.8 by making the presence of the
'unsigned int' type optional.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-10-03 Tom de Vries <tdevries@suse.de>
PR testsuite/25059
* gdb.base/info-types.exp: Make the presence of the 'unsigned int'
type optional.
|
|
In the following 3 commits:
commit df07e2c772dab40d268dc44c78bb087c4b75b3c6
Date: Wed Sep 25 16:10:50 2019 +0100
gdb: Remove a use of VEC from dwarf2read.{c,h}
commit 554ac434b02465f1fc925b0ae3393fb841e0d59c
Date: Thu Sep 19 13:17:59 2019 -0400
gdb: Change a VEC to std::vector in btrace.{c,h}
commit 46f29a9a260da1a03176682aff63bad03d8f2e8b
Date: Mon Sep 16 09:12:27 2019 -0400
gdb: Remove a VEC from gdbsupport/btrace-common.h
I incorrectly wrote 'std::vector <...>' instead of 'std::vector<...>',
this commit fixes this mistake. There should be no user visible
changes after this commit.
gdb/ChangeLog:
* btrace.c (btrace_add_pc): Remove whitespace before the template
parameter in 'std::vector <...>'.
(parse_xml_btrace_block): Likewise.
(btrace_maint_decode_pt): Likewise.
(btrace_maint_update_packets): Likewise.
(btrace_maint_print_packets): Likewise.
* btrace.h (struct btrace_maint_info): Likewise.
* dwarf2read.c (struct type_unit_group): Likewise.
(build_type_psymtabs_reader): Likewise.
* gdbsupport/btrace-common.c (btrace_data_append): Likewise.
* gdbsupport/btrace-common.h (struct btrace_data_bts): Likewise.
* nat/linux-btrace.c (perf_event_read_bts): Likewise.
|
|
There's a recent regression:
...
FAIL: gdb.gdb/unittest.exp: maintenance selftest
...
In more detail:
...
Running selftest help_doc_invariants.^M
help doc broken invariant: command 'set style metadata' help doc first line \
is not terminated with a '.' character^M
help doc broken invariant: command 'show style metadata' help doc first line \
is not terminated with a '.' character^M
Self test failed: self-test failed at gdb/unittests/help-doc-selftests.c:95^M
...
Fix this by adding a '.' at the end of the first line of the help text for
set/show style metadata.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-10-03 Tom de Vries <tdevries@suse.de>
* cli/cli-style.c (_initialize_cli_style): Adding a '.' at the end of
the first line of the help text for set/show style metadata.
|
|
Converts the int globals to bool.
gdb/gdbserver/ChangeLog:
2019-10-02 Christian Biesinger <cbiesinger@google.com>
* server.c (server_waiting): Change to bool.
(extended_protocol): Likewise.
(response_needed): Likewise.
(exit_requested): Likewise.
(run_once): Likewise.
(report_no_resumed): Likewise.
(non_stop): Likewise.
(disable_packet_vCont): Likewise.
(disable_packet_Tthread): Likewise.
(disable_packet_qC): Likewise.
(disable_packet_qfThreadInfo): Likewise.
(handle_general_set): Update.
(handle_detach): Update.
(handle_monitor_command): Update.
(handle_query): Update.
(captured_main): Update.
(process_serial_event): Update.
* server.h (server_waiting): Change to bool.
(disable_packet_vCont): Likewise.
(disable_packet_Tthread): Likewise.
(disable_packet_qC): Likewise.
(disable_packet_qfThreadInfo): Likewise.
(run_once): Likewise.
(non_stop): Likewise.
* target.c (target_stop_and_wait): Update.
|
|
startup_with_shell was changed to be of "bool" type, but I noticed
that the definition in gdbserver disagreed. This disagreement caused
some regressions on a big-endian machine.
This patch removes the redundant declaration and definition of
startup_with_shell and ensures that such clashes will be diagnosed.
This moves the declaration to common-inferior.h, and introduces a new
common-inferior.c, as suggested by Pedro.
gdb/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* Makefile.in (COMMON_SFILES): Add common-inferior.c.
* gdbsupport/common-inferior.c: New file.
* infcmd.c (startup_with_shell): Don't define.
* nat/fork-inferior.h (startup_with_shell): Don't declare.
* gdbsupport/common-inferior.h (startup_with_shell): Declare.
* inferior.h (startup_with_shell): Don't declare.
gdb/gdbserver/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* Makefile.in (SFILES): Add common-inferior.c.
(OBS): Add common-inferior.o.
* server.c (startup_with_shell): Don't define.
|
|
gdb::string_view uses gdb_assert, so it should include that header.
And gdb_assert uses internal_error, so it should include errors.h.
gdb/ChangeLog:
2019-10-02 Christian Biesinger <cbiesinger@google.com>
* gdbsupport/gdb_assert.h: Include errors.h.
* gdbsupport/gdb_string_view.h: Include gdb_assert.h.
|
|
GDB's py-format-string test case depends on endianness. In particular it
relies on the first byte of the machine representation of 42 (as an int)
to be 42 as well. While this is indeed the case for little-endian
machines, big-endian machines store a zero in the first byte instead. The
wrong assumption leads to lots of FAILs on such architectures.
Fix this by filling the affected union with bytes of the same value, such
that endianness does not matter. Use the value 42, to keep the character
in the first byte unchanged.
gdb/testsuite/ChangeLog:
* gdb.python/py-format-string.c (string.h): New include.
(main): Fill a_struct_with_union.the_union.an_int with bytes of
the same value, for endianness-independence.
* gdb.python/py-format-string.exp (default_regexp_dict)
(test_pretty_structs, test_format): Adjust expected output to the
changed initialization.
|
|
This adds the $_ada_exception convenience variable. It is set by the
Ada exception catchpoints, and holds the address of the exception
currently being thrown. This is useful because it allows more
fine-grained filtering of exceptions than is possible using the
existing "catch" syntax.
This also simplifies Ada catchpoints somewhat; because the catchpoint
must now carry the "kind", it's possible to remove many helper
functions.
gdb/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* NEWS: Add $_ada_exception entry.
* ada-lang.c (struct ada_catchpoint): Add constructor.
<m_kind>: New member.
(allocate_location_exception, re_set_exception): Remove
"ex" parameter.
(should_stop_exception): Compute $_ada_exception.
(check_status_exception, print_it_exception)
(print_one_exception, print_mention_exception): Remove
"ex" parameter.
(allocate_location_catch_exception, re_set_catch_exception)
(check_status_exception, print_it_catch_exception)
(print_one_catch_exception, print_mention_catch_exception)
(print_recreate_catch_exception)
(allocate_location_catch_exception_unhandled)
(re_set_catch_exception_unhandled)
(check_status_exception, print_it_catch_exception_unhandled)
(print_one_catch_exception_unhandled)
(print_mention_catch_exception_unhandled)
(print_recreate_catch_exception_unhandled)
(allocate_location_catch_assert, re_set_catch_assert)
(check_status_assert, print_it_catch_assert)
(print_one_catch_assert, print_mention_catch_assert)
(print_recreate_catch_assert)
(allocate_location_catch_handlers, re_set_catch_handlers)
(check_status_handlers, print_it_catch_handlers)
(print_one_catch_handlers, print_mention_catch_handlers)
(print_recreate_catch_handlers): Remove.
(create_ada_exception_catchpoint): Update.
(initialize_ada_catchpoint_ops): Update.
gdb/doc/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* gdb.texinfo (Set Catchpoints, Convenience Vars): Document
$_ada_exception.
gdb/testsuite/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* gdb.ada/catch_ex_std.exp: Add $_ada_exception test.
|
|
commit 2ff0a9473 (Fix "catch exception" with dynamic linking) changed
how ada-lang.c creates expressions to determine if an exception
catchpoint should stop.
That patch is no longer needed now that copy relocations are handled
more directly.
gdb/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* ada-lang.c (ada_lookup_simple_minsyms): Remove.
(create_excep_cond_exprs): Simplify exception string computation.
(ada_exception_catchpoint_cond_string): Likewise.
|
|
symbol
Make gdb.base/print-file-var.exp test all combinations of:
- attribute hidden in the this_version_id symbols or not
- dlopen or not
- this_version_id symbol in main file or not
- C++
gdb/testsuite/ChangeLog
2019-10-02 Pedro Alves <palves@redhat.com>
Andrew Burgess <andrew.burgess@embecosm.com>
* gdb.base/print-file-var-lib1.c: Include <stdio.h> and
"print-file-var.h".
(this_version_id) Use ATTRIBUTE_VISIBILITY.
(get_version_1): Print this_version_id and its address.
Add extern "C" wrappers around interface functions.
* gdb.base/print-file-var-lib2.c: Include <stdio.h> and
"print-file-var.h".
(this_version_id) Use ATTRIBUTE_VISIBILITY.
(get_version_2): Print this_version_id and its address.
Add extern "C" wrappers around interface functions.
* gdb.base/print-file-var-main.c: Include <dlfcn.h>, <assert.h>,
<stddef.h> and "print-file-var.h".
Add extern "C" wrappers around interface functions.
[VERSION_ID_MAIN] (this_version_id): Define.
(main): Define v0. Use dlopen if SHLIB_NAME is defined.
* gdb.base/print-file-var.h: Add some #defines to simplify setting
up extern "C" blocks.
* gdb.base/print-file-var.exp (test): New, factored out from top
level.
(top level): Test all combinations of attribute hidden or not,
dlopen or not, and this_version_id symbol in main file or not.
Compile tests as both C++ and C, make test names unique.
|
|
In ELF, if a data symbol is defined in a shared library and used by
the main program, it will be subject to a "copy relocation". In this
scenario, the main program has a copy of the symbol in question, and a
relocation that tells ld.so to copy the data from the shared library.
Then the symbol in the main program is used to satisfy all references.
This patch changes gdb to handle this scenario. Data symbols coming
from ELF shared libraries get a special flag that indicates that the
symbol's address may be subject to copy relocation.
I looked briefly into handling copy relocations by looking at the
actual relocations in the main program, but this seemed difficult to
do with BFD.
Note that no caching is done here. Perhaps this could be changed if
need be; I wanted to avoid possible problems with either objfile
lifetimes and changes, or conflicts with the long-term (vapor-ware)
objfile splitting project.
gdb/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* symmisc.c (dump_msymbols): Don't use MSYMBOL_VALUE_ADDRESS.
* ada-lang.c (lesseq_defined_than): Handle
LOC_STATIC.
* dwarf2read.c (dwarf2_per_objfile): Add can_copy
parameter.
(dwarf2_has_info): Likewise.
(new_symbol): Set maybe_copied on symbol when
appropriate.
* dwarf2read.h (dwarf2_per_objfile): Add can_copy
parameter.
<can_copy>: New member.
* elfread.c (record_minimal_symbol): Set maybe_copied
on symbol when appropriate.
(elf_symfile_read): Update call to dwarf2_has_info.
* minsyms.c (lookup_minimal_symbol_linkage): New
function.
* minsyms.h (lookup_minimal_symbol_linkage): Declare.
* symtab.c (get_symbol_address, get_msymbol_address):
New functions.
* symtab.h (get_symbol_address, get_msymbol_address):
Declare.
(SYMBOL_VALUE_ADDRESS, MSYMBOL_VALUE_ADDRESS): Handle
maybe_copied.
(struct symbol, struct minimal_symbol) <maybe_copied>:
New member.
|
|
This changes current_source_symtab and current_source_line to be
per-program-space. This ensures that switching inferiors will
preserve the current "list" location for that inferior, and also
ensures that the default expression evaluation context always comes
with the current inferior.
No test case, because the latter problem crops up with an existing
gdb.multi test case once this entire series has been applied.
gdb/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* source.c (struct current_source_location): New.
(current_source_key): New global.
(current_source_symtab, current_source_line)
(current_source_pspace): Remove.
(get_source_location): New function.
(get_current_source_symtab_and_line)
(set_default_source_symtab_and_line)
(set_current_source_symtab_and_line)
(clear_current_source_symtab_and_line, select_source_symtab)
(info_source_command, print_source_lines_base)
(info_line_command, search_command_helper, _initialize_source):
Update.
|
|
select_source_symtab currently calls decode_line_with_current_source.
However, this function iterates over all program spaces, and so it is
possible that it will return a "main" from some other program space.
This patch changes select_source_symtab to simply use the symbol it
already found in the current program space.
gdb/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* source.c (select_source_symtab): Don't call
decode_line_with_current_source.
|
|
This changes lookup_global_symbol to look in the global block
of the passed-in block. If no block was passed in, it reverts to the
previous behavior.
This change is needed to ensure that 'FILENAME'::NAME lookups work
properly. As debugging Pedro's test case showed, this was not working
properly in the case where multiple identical names could be found
(the one situation where this feature is truly needed :-).
This also removes some old comments from basic_lookup_symbol_nonlocal
that no longer apply.
Note that the new test cases for this change will appear in a later
patch. They are in gdb.base/print-file-var.exp.
gdb/ChangeLog
2019-10-02 Andrew Burgess <andrew.burgess@embecosm.com>
* symtab.c (lookup_global_symbol): Search global block.
|
|
This changes SYMBOL_VALUE_ADDRESS to be an rvalue. The symbol readers
generally assign using this, so this also introduces
SET_SYMBOL_VALUE_ADDRESS and updates the readers. Making this change
is useful in a subsequent patch, which redefined SYMBOL_VALUE_ADDRESS.
gdb/ChangeLog
2019-10-02 Tom Tromey <tromey@adacore.com>
* coffread.c (process_coff_symbol): Update.
* dwarf2read.c (var_decode_location, new_symbol): Update.
* mdebugread.c (parse_symbol): Update.
* objfiles.c (relocate_one_symbol): Update.
* stabsread.c (define_symbol, fix_common_block)
(scan_file_globals): Update.
* symtab.h (SYMBOL_VALUE_ADDRESS): Expand to an rvalue.
(SET_SYMBOL_VALUE_ADDRESS): New macro.
* xcoffread.c (process_xcoff_symbol): Update.
|
|
My email address at IBM has changed from arnez@linux.vnet.ibm.com to
arnez@linux.ibm.com. Reflect that in the MAINTAINERS file.
gdb/ChangeLog:
* MAINTAINERS: Update my email address.
|
|
Removes a use of VEC from dwarf2read.{c,h} and replaces it with
std::vector. As far as possible this is a like for like replacement
with minimal refactoring.
There should be no user visible changes after this commit.
gdb/ChangeLog:
* dwarf2read.c (struct type_unit_group) <tus>: Convert to
std::vector.
(build_type_psymtabs_reader): Update for std::vector.
(build_type_psymtab_dependencies): Likewise.
* dwarf2read.h: Remove use of DEF_VEC_P.
(typedef sig_type_ptr): Delete.
|
|
Replace a VEC with a std::vector in btrace.h, and update btrace.c to
match. It is worth noting that this code appears to be currently
untested by the GDB testsuite. I've tried to do a like for like
replacement when moving to std::vector, with minimal refactoring to
try and avoid introducing any bugs.
As the new vector is inside a union I've currently used a pointer to
vector, which makes the code slightly uglier than it might otherwise
be, but again, due to lack of testing I'm reluctant to start
refactoring the code in a big way.
gdb/ChangeLog:
* btrace.c (btrace_maint_clear): Update to handle change from VEC
to std::vector.
(btrace_maint_decode_pt): Likewise, and move allocation of the
vector outside of the loop.
(btrace_maint_update_packets): Update to handle change from VEC to
std::vector.
(btrace_maint_print_packets): Likewise.
(maint_info_btrace_cmd): Likewise.
* btrace.h: Remove use of DEF_VEC_O.
(typedef btrace_pt_packet_s): Delete.
(struct btrace_maint_info) <packets>: Change fromm VEC to
std::vector.
* gdbsupport/btrace-common.h: Remove 'vec.h' include.
|
|
Converts a VEC into a std::vector in gdbsupport/btrace-common.h. This
commit just performs a mechanical conversion and doesn't do any
refactoring. One consequence of this is that the std::vector must
actually be a pointer to std::vector as it is placed within a union.
It might be possible in future to refactor to a class hierarchy and
remove the need for a union, but I'd rather have that be a separate
change to make it easier to see the evolution of the code.
gdb/ChangeLog:
* btrace.c (btrace_compute_ftrace_bts): Update for std::vector,
make accesses into the vector constant references.
(btrace_add_pc): Update for std::vector.
(btrace_stitch_bts): Likewise.
(parse_xml_btrace_block): Likewise.
(btrace_maint_update_packets): Likewise.
(btrace_maint_print_packets): Likewise.
(maint_info_btrace_cmd): Likewise.
* gdbsupport/btrace-common.c (btrace_data::fini): Update for
std::vector.
(btrace_data::empty): Likewise.
(btrace_data_append): Likewise.
* gdbsupport/btrace-common.h: Remove use of DEF_VEC_O.
(typedef btrace_block_s): Delete.
(struct btrace_block): Add constructor.
(struct btrace_data_bts) <blocks>: Change to std::vector.
* nat/linux-btrace.c (perf_event_read_bts): Update for
std::vector.
(linux_read_bts): Likewise.
gdb/gdbserver/ChangeLog:
* linux-low.c (linux_low_read_btrace): Update for change to
std::vector.
|
|
This changes "show logging filename" to style its output.
gdb/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* cli/cli-logging.c (show_logging_filename): Use styled_string.
gdb/testsuite/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Test "show logging filename".
|
|
This adds more uses of styled_string, changing gdb to style some
output that was previously left unstyled.
gdb/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* stack.c (print_frame, info_frame_command_core): Use
styled_string.
* linux-thread-db.c (try_thread_db_load_1)
(try_thread_db_load_from_pdir_1): Use styled_string.
* auto-load.c (file_is_auto_load_safe, execute_script_contents)
(auto_load_section_scripts, info_auto_load_local_gdbinit)
(maybe_print_unsupported_script_warning)
(maybe_print_script_not_found_warning): Use styled_string.
* ada-lang.c (user_select_syms): Use styled_string.
|
|
This introduces a new "metadata" style and changes many places in gdb
to use it. The idea here is to let the user distinguish gdb output
from output that (conceptually at least) comes directly from the
inferior. The newly-styled category includes text that gdb
traditionally surrounds in "<...>", like "<unavailable>".
I only added a single test for this. In many cases this output is
difficult to test. Also, while developing this errors in the
implementation of the new printf formats showed up as regressions.
gdb/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* p-lang.c (pascal_printstr): Use metadata style.
* value.c (show_convenience): Use metadata style.
* valprint.c (valprint_check_validity, val_print_optimized_out)
(val_print_not_saved, val_print_unavailable)
(val_print_invalid_address, generic_val_print, val_print)
(value_check_printable, val_print_array_elements): Use metadata
style.
* ui-out.h (class ui_out) <field_fmt>: New overload.
<do_field_fmt>: Add style parameter.
* ui-out.c (ui_out::field_fmt): New overload.
* typeprint.c (type_print_unknown_return_type)
(val_print_not_allocated, val_print_not_associated): Use metadata
style.
* tui/tui-out.h (class tui_ui_out) <do_field_fmt>: Add style
parameter.
* tui/tui-out.c (tui_ui_out::do_field_fmt): Update.
* tracepoint.c (tvariables_info_1): Use metadata style.
* stack.c (print_frame_arg, print_frame_info, print_frame)
(info_frame_command_core): Use metadata style.
* skip.c (info_skip_command): Use metadata style.
* rust-lang.c (rust_print_enum): Use metadata style.
* python/py-prettyprint.c (print_stack_unless_memory_error): Use
metadata style.
* python/py-framefilter.c (py_print_single_arg): Use metadata
style.
* printcmd.c (do_one_display, print_variable_and_value): Use
metadata style.
* p-valprint.c (pascal_val_print)
(pascal_object_print_value_fields): Use metadata style.
* p-typeprint.c (pascal_type_print_base): Use metadata style.
* mi/mi-out.h (class mi_ui_out) <do_field_fmt>: Add style
parameter.
* mi/mi-out.c (mi_ui_out::do_field_fmt): Update.
* m2-valprint.c (m2_print_long_set): Use metadata style.
* m2-typeprint.c (m2_print_type): Use metadata style.
* infcmd.c (print_return_value_1): Use metadata style.
* gnu-v3-abi.c (print_one_vtable): Use metadata style.
* f-valprint.c (info_common_command_for_block): Use metadata
style.
* f-typeprint.c (f_type_print_base): Use metadata style.
* expprint.c (print_subexp_standard): Use metadata style.
* cp-valprint.c (cp_print_value_fields): Use metadata style.
* cli/cli-style.h (class cli_style_option): Add constructor.
(metadata_style): Declare.
* cli/cli-style.c (metadata_style): New global.
(_initialize_cli_style): Register metadata style.
* cli-out.h (class cli_ui_out) <do_field_fmt>: Add style
parameter.
* cli-out.c (cli_ui_out::do_field_fmt): Update.
* c-typeprint.c (c_type_print_base_struct_union)
(c_type_print_base_1): Use metadata style.
* breakpoint.c (watchpoint_value_print)
(print_one_breakpoint_location): Use metadata style.
* break-catch-syscall.c (print_one_catch_syscall): Use metadata
style.
* break-catch-sig.c (signal_catchpoint_print_one): Use metadata
style.
* ada-valprint.c (val_print_packed_array_elements, printstr)
(print_field_values, ada_val_print_ref, ada_val_print): Use
metadata style.
* ada-typeprint.c (print_array_type, ada_print_type): Use metadata
style.
* ada-tasks.c (print_ada_task_info, info_task): Use metadata
style.
* ada-lang.c (user_select_syms): Use metadata style.
gdb/testsuite/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* lib/gdb-utils.exp (style): Handle "metadata" argument.
* gdb.base/style.exp: Add metadata style test.
|
|
This changes the "pwd" command to style its output.
gdb/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* cli/cli-cmds.c (pwd_command): Style output.
gdb/testsuite/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Test "pwd".
|
|
This changes various spots in gdb to use the new %p format suffixes.
gdb/ChangeLog
2019-10-01 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* symtab.c (print_symbol_info): Use %ps.
(print_msymbol_info): Use %ps.
* symfile.c (symbol_file_add_with_addrs): Use %ps.
* printcmd.c (print_variable_and_value): Use %ps.
* macrocmd.c (show_pp_source_pos): Use %ps.
* infrun.c (print_exited_reason): Use ui_out::message.
* breakpoint.c (watchpoint_check, print_one_breakpoint_location)
(describe_other_breakpoints): Use ui_out::message and new
formats.
(say_where): Use new formats.
(bkpt_print_it, tracepoint_print_one_detail): Use ui_out::message
and new formats.
|
|
This introduces a few gdb-specific %p format suffixes. This is useful
for emitting gdb-specific output in an ergonomic way. It also yields
code that is more i18n-friendly.
The comment before ui_out::message explains the details.
Note that the tests had to change a little. When using one of the gdb
printf functions with styling, there can be spurious style changes
emitted to the output. This did not seem worthwhile to fix, as the
low-level output functions are rather spaghetti-ish already, and I
didn't want to make them even worse.
This change also necessitated adding support for "*" as precision and
width in format_pieces. These are used in various spots in gdb, and
it seemed better to me to implement them than to remove the uses.
gdb/ChangeLog
2019-10-01 Pedro Alves <palves@redhat.com>
Tom Tromey <tom@tromey.com>
* unittests/format_pieces-selftests.c: Add gdb_format parameter.
(test_gdb_formats): New function.
(run_tests): Call it.
(test_format_specifier): Update.
* utils.h (fputs_filtered): Update comment.
(vfprintf_styled, vfprintf_styled_no_gdbfmt)
(fputs_styled_unfiltered): Declare.
* utils.c (fputs_styled_unfiltered): New function.
(vfprintf_maybe_filtered): Add gdbfmt parameter.
(vfprintf_filtered): Update.
(vfprintf_unfiltered, vprintf_filtered): Update.
(vfprintf_styled, vfprintf_styled_no_gdbfmt): New functions.
* ui-out.h (enum ui_out_flag) <unfiltered_output,
disallow_ui_out_field>: New constants.
(enum class field_kind): New.
(struct base_field_s, struct signed_field_s): New.
(signed_field): New function.
(struct string_field_s): New.
(string_field): New function.
(struct styled_string_s): New.
(styled_string): New function.
(class ui_out) <message>: Add comment.
<vmessage, call_do_message>: New methods.
<do_message>: Add style parameter.
* ui-out.c (ui_out::call_do_message, ui_out::vmessage): New
methods.
(ui_out::message): Rewrite.
* mi/mi-out.h (class mi_ui_out) <do_message>: Add style
parameter.
* mi/mi-out.c (mi_ui_out::do_message): Add style parameter.
* gdbsupport/format.h (class format_pieces) <format_pieces>: Add
gdb_extensions parameter.
(class format_piece): Add parameter to constructor.
(n_int_args): New field.
* gdbsupport/format.c (format_pieces::format_pieces): Add
gdb_extensions parameter. Handle '*'.
* cli-out.h (class cli_ui_out) <do_message>: Add style parameter.
* cli-out.c (cli_ui_out::do_message): Add style parameter. Call
vfprintf_styled_no_gdbfmt.
(cli_ui_out::do_field_string, cli_ui_out::do_spaces)
(cli_ui_out::do_text, cli_ui_out::field_separator): Allow
unfiltered output.
* ui-style.h (struct ui_file_style) <ptr>: New method.
gdb/testsuite/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* gdb.base/style.exp: Update tests.
|
|
I noticed that format_pieces can create an empty literal piece.
However, there's never a need for one, so this patch removes the
possibility.
gdb/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* unittests/format_pieces-selftests.c: Update. Add final format.
* gdbsupport/format.c (format_pieces::format_pieces): Don't add
empty literal pieces.
|
|
This removes the ui_out_style_kind enum, in favor of simply using
ui_file_style references. This simplifies the code somewhat.
gdb/ChangeLog
2019-10-01 Tom Tromey <tom@tromey.com>
* ui-out.h (enum class ui_out_style_kind): Remove.
(class ui_out) <field_string, field_stsream, do_field_string>:
Change type of "style".
* ui-out.c (ui_out::field_core_addr, ui_out::field_stream)
(ui_out::field_string): Update.
* tui/tui-out.h (class tui_ui_out) <do_field_string>: Change type
of "style".
* tui/tui-out.c (tui_ui_out::do_field_string): Update.
* tracepoint.c (print_one_static_tracepoint_marker): Update.
* stack.c (print_frame_arg, print_frame_info, print_frame):
Update.
* source.c (print_source_lines_base): Update.
* solib.c (info_sharedlibrary_command): Update.
* skip.c (info_skip_command): Update.
* record-btrace.c (btrace_call_history_src_line)
(btrace_call_history): Update.
* python/py-framefilter.c (py_print_frame): Update.
* mi/mi-out.h (class mi_ui_out) <do_field_string>: Change type of
"style".
* mi/mi-out.c (mi_ui_out::do_table_header)
(mi_ui_out::do_field_signed, mi_ui_out::do_field_unsigned)
(mi_ui_out::do_field_string): Update.
* disasm.c (gdb_pretty_print_disassembler::pretty_print_insn):
Update.
* cli-out.h (class cli_ui_out) <do_field_string>: Change type of
"style".
* cli-out.c (cli_ui_out::do_table_header)
(cli_ui_out::do_field_signed, cli_ui_out::do_field_unsigned)
(cli_ui_out::do_field_skip, cli_ui_out::do_field_string)
(cli_ui_out::do_field_fmt): Update.
* breakpoint.c (print_breakpoint_location): Update.
(update_static_tracepoint): Update.
|
|
The pretty-print test case fails on s390/s390x because it relies on a
little-endian representation of bit fields. Little-endian architectures
typically allocate bit fields from least to most significant bit, but
big-endian architectures typically use the reverse order, allocating the
most significant bit first. Thus the two bit fields in each of the test
case's unions overlap either in their lower or in their higher bits,
depending on the target's endianness:
union {
int three : 3;
int four : 4;
};
Now, when initializing 'three' with 3, 'four' will become 3 on little
endian targets, but 6 on big-endian targets, making it FAIL there.
Fix this by initializing the longer bit field instead and using an
all-ones bit pattern. In this way the result does not depend on
endianness. Use 'unsigned' instead of int for one of the bit fields in
each of the unions, to increase the variety of resulting values.
gdb/testsuite/ChangeLog:
* gdb.base/pretty-print.c (struct s1_t): Change fields 'three' and
'six' to unsigned.
(s1): Initialize fields 'four' and 'six' instead of 'three' and
'five'. Use an all-ones bit pattern for each.
* gdb.base/pretty-print.exp: Adjust expected output of "print s1"
to its changed values.
|
|
Valgrind reports the following leak:
==32623== 56 bytes in 1 blocks are definitely lost in loss record 1,099 of 6,654
==32623== at 0x4835753: malloc (vg_replace_malloc.c:307)
==32623== by 0x25CF67: xmalloc (alloc.c:60)
==32623== by 0x65FBD9: xstrdup (xstrdup.c:34)
==32623== by 0x413D9E: captured_main_1(captured_main_args*) (main.c:553)
==32623== by 0x414FFA: captured_main (main.c:1172)
==32623== by 0x414FFA: gdb_main(captured_main_args*) (main.c:1197)
==32623== by 0x22531A: main (gdb.c:32)
Commit f2aec7f6d14 changed gdb_datadir to std::string.
So, xstrdup-ing the result of relocate_gdb_directory (returning a std::string)
is not needed and creates a leak.
Fix the leak by removing the xstrdup and the not needed c_str ().
Also removes a useless conversion of gdb_datadir to std::string.
gdb/ChangeLog
2019-10-01 Philippe Waroquiers <philippe.waroquiers@skynet.be>
* main.c (relocate_gdbinit_path_maybe_in_datadir): Remove std::string
conversion of gdb_datadir.
(captured_main_1): Remove xstrdup when assigning to gdb_datadir,
remove not needed c_str ().
|
|
* Handle DW_FORM_strx forms everywhere.
Tested with CC=/usr/bin/gcc (version 8.3.0) against master branch (also with
-gsplit-dwarf and -gdwarf-4 flags) and there was no increase in the set of
tests that fails.
This is part of an effort to support DWARF 5 in gdb.
gdb/ChangeLog:
* dwarf2read.c (skip_one_die): Handle DW_FORM_strx forms.
(dwarf2_string_attr): Likewise.
|
|
gdb/ChangeLog:
* dwarf2read.c (process_full_comp_unit): Remove whitespace at the EOL.
(process_full_type_unit): Likewise.
(dump_die_shallow): Likewise.
(cu_debug_loc_section): Likewise.
|
|
This has better typesafety and is also marginally faster (either
due to inlining or because it avoids indirection through a
function pointer).
Note that in this change:
- return 1; /* fn1 has no name, so it is "less". */
+ return true; /* fn1 has no name, so it is "less". */
else if (name1) /* fn2 has no name, so it is "less". */
- return -1;
+ return false;
I am fairly sure the old code was wrong (ie. code didn't match the
comment and the comment seemed correct), so I fixed it.
gdb/ChangeLog:
2019-09-28 Christian Biesinger <cbiesinger@google.com>
* minsyms.c (compare_minimal_symbols): Rename to...
(minimal_symbol_is_less_than): ...this, and adjust to STL
conventions (return bool, take arguments as references)
(minimal_symbol_reader::install): Call std::sort instead
of qsort.
|
|
With rustc 1.37, I started seeing compiler warnings from the traits.rs
test case:
warning: trait objects without an explicit `dyn` are deprecated
It seems to me that we generally do not want warnings in these test
cases. At some point, we'll probably have to patch traits.rs to use
the "dyn" keyword; by that time I expect that all the Rust compilers
in common use will support it. In the meantime it seemed simplest to
simply disable all warnings in this file.
gdb/testsuite/ChangeLog
2019-09-30 Tom Tromey <tromey@adacore.com>
* gdb.rust/traits.rs: Disable all warnings.
|
|
This just clarifies some comments about the hashtables involved
in msymbols.
gdb/ChangeLog:
2019-09-29 Christian Biesinger <cbiesinger@google.com>
* minsyms.h (msymbol_hash): Document that this is a case-insensitive
hash and why.
* objfiles.h (struct objfile_per_bfd_storage) <demangled_names_hash,
msymbol_hash, msymbol_demangled_hash>: Improve comments.
|
|
The comment above the add_psymbol_to_list function seems outdated and
misleading, here's an attempt at improving it.
gdb/ChangeLog:
* psymtab.c (add_psymbol_to_list): Move comment to psympriv.h.
* psympriv.h (add_psymbol_to_list): Move comment here and update
it.
|
|
When running a test-case gdb.base/foo.exp with cc-with-dwz-m, a file
build/gdb/testsuite/outputs/gdb.base/foo/foo.dwz will be created, alongside
executable build/gdb/testsuite/outputs/gdb.base/foo/foo.
This can cause problems in f.i. test-cases that test file name completion.
Make these problems less likely by moving foo.dwz to a .tmp subdir:
build/gdb/testsuite/outputs/gdb.base/foo/.tmp/foo.dwz.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-09-29 Tom de Vries <tdevries@suse.de>
* contrib/cc-with-tweaks.sh (get_tmpdir): New function.
Use $tmpdir/$(basename "$output_file").dwz instead of
"${output_file}.dwz".
gdb/testsuite/ChangeLog:
2019-09-29 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/gdb-index.exp: Handle new location of .dwz file.
|
|
With cc-with-dwz-m, we get:
...
PASS: gdb.dwarf2/gdb-index.exp: objcopy
PASS: gdb.dwarf2/gdb-index.exp: objcopy
...
Make the pass message unique by using with_test_prefix:
...
PASS: gdb.dwarf2/gdb-index.exp: objcopy
PASS: gdb.dwarf2/gdb-index.exp: modify dwz file: objcopy
...
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-09-29 Tom de Vries <tdevries@suse.de>
* gdb.dwarf2/gdb-index.exp: Use with_test_prefix for second objcopy.
|
|
hppa-linux-nat.c fails to build due to the gdbarch stuff not being
declared, for example:
hppa-linux-nat.c: In function ‘void fetch_register(regcache*, int)’:
hppa-linux-nat.c:230:7: error: ‘gdbarch_cannot_fetch_register’ was not declared in this scope
if (gdbarch_cannot_fetch_register (gdbarch, regno))
Include gdbarch.h to fix it.
gdb/ChangeLog:
PR gdb/25045
* hppa-linux-nat.c: Include gdbarch.h.
|
|
The commit 68f7d34dd50 "[gdb/testsuite] Add KFAIL for missing support of
reverse-debugging of vmovd" rewrites a gdb_test into a gdb_test_multiple but
forgets to add the $gdb_prompt part in the regexp.
Add the missing parts of the regexps.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-09-27 Tom de Vries <tdevries@suse.de>
* gdb.reverse/step-precsave.exp: Add missing $gdb_prompt in regexps.
|
|
On my openSUSE Leap 15.1 system I run into:
...
(gdb) PASS: gdb.reverse/step-precsave.exp: turn on process record
break 76^M
Breakpoint 2 at 0x400654: file step-reverse.c, line 76.^M
(gdb) PASS: gdb.reverse/step-precsave.exp: breakpoint at end of main
continue^M
Continuing.^M
Process record does not support instruction 0xc5 at address 0x7ffff783fc70.^M
Process record: failed to record execution log.^M
^M
Program stopped.^M
0x00007ffff783fc70 in __memset_avx2_unaligned_erms () from /lib64/libc.so.6^M
(gdb) FAIL: gdb.reverse/step-precsave.exp: run to end of main
...
The problem is that the vmovd instruction is not supported in
reverse-debugging (PR record/23188).
Add a KFAIL for this PR.
Tested on x86_64-linux.
gdb/testsuite/ChangeLog:
2019-09-27 Tom de Vries <tdevries@suse.de>
PR record/23188
* gdb.reverse/step-precsave.exp: Add kfail for PR record/23188.
|
|
This reverts commit 381beca6146ac68b57edf47d28cdb335fbd11635.
The patch hasn't been fully reviewed yet, and Pedro would like to see
more fixes.
|
|
In Fedora GDB, we carry the following patch:
https://src.fedoraproject.org/rpms/gdb/blob/8ac06474ff1e2aa4920d14e0666b083eeaca8952/f/gdb-attach-fail-reasons-5of5.patch
Its purpose is to try to detect a specific scenario where SELinux's
'deny_ptrace' option is enabled, which prevents GDB from ptrace'ing in
order to debug the inferior (PTRACE_ATTACH and PTRACE_TRACEME will
fail with EACCES in this case).
I like the idea of improving error detection and providing more
information to the user (a simple "Permission denied" can be really
frustrating), but I don't fully agree with the way the patch was
implemented: it makes GDB link against libselinux only for the sake of
consulting the 'deny_ptrace' setting, and then prints a warning if
ptrace failed and this setting is on.
My first thought (and attempt) was to make GDB print a generic warning
when a ptrace error happened; this message would just point the user
to our documentation, where she could find more information about
possible causes for the error (and try to diagnose/fix the problem).
This proved to be too simple, and I was convinced that it is actually
a good idea to go the extra kilometre and try to pinpoint the specific
problem (or problems) preventing ptrace from working, as well as
provide useful suggestions on how the user can fix things.
Here is the patch I came up with. It implements a new function,
'linux_ptrace_restricted_fail_reason', which does a few things to
check what's wrong with ptrace:
- It dlopen's "libselinux.so.1" and checks if the "deny_ptrace"
option is enabled.
- It reads the contents of "/proc/sys/kernel/yama/ptrace_scope" and
checks if it's different than 0.
For each of these checks, if it succeeds, the user will see a message
informing about the restriction in place, and how it can be disabled.
For example, if "deny_ptrace" is enabled, the user will see:
# gdb /usr/bin/true
...
Starting program: /usr/bin/true
warning: Could not trace the inferior process.
warning: ptrace: Permission denied
The SELinux 'deny_ptrace' option is enabled and preventing GDB
from using 'ptrace'. You can disable it by executing (as root):
setsebool deny_ptrace off
If you are debugging the inferior remotely, the ptrace restriction(s) need
to be disabled in the target system (e.g., where GDBserver is running).
During startup program exited with code 127.
(gdb)
In case "/proc/sys/kernel/yama/ptrace_scope" is > 0:
# gdb /usr/bin/true
...
Starting program: /usr/bin/true
warning: Could not trace the inferior process.
warning: ptrace: Operation not permitted
The Linux kernel's Yama ptrace scope is in effect, which can prevent
GDB from using 'ptrace'. You can disable it by executing (as root):
echo 0 > /proc/sys/kernel/yama/ptrace_scope
If you are debugging the inferior remotely, the ptrace restriction(s) need
to be disabled in the target system (e.g., where GDBserver is running).
During startup program exited with code 127.
(gdb)
If both restrictions are enabled, both messages will show up.
This works for gdbserver as well, and actually fixes a latent bug I
found: when ptrace is restricted, gdbserver would hang due to an
unchecked ptrace call:
# gdbserver :9988 /usr/bin/true
gdbserver: linux_ptrace_test_ret_to_nx: Cannot PTRACE_TRACEME: Operation not permitted
gdbserver: linux_ptrace_test_ret_to_nx: status 256 is not WIFSTOPPED!
gdbserver: linux_ptrace_test_ret_to_nx: failed to kill child pid 2668100 No such process
[ Here you would have to issue a C-c ]
Now, you will see:
# gdbserver :9988 /usr/bin/true
gdbserver: linux_ptrace_test_ret_to_nx: Cannot PTRACE_TRACEME: Permission denied
gdbserver: linux_ptrace_test_ret_to_nx: status 256 is not WIFSTOPPED!
gdbserver: linux_ptrace_test_ret_to_nx: failed to kill child pid 2766868 No such process
gdbserver: Could not trace the inferior process.
gdbserver: ptrace: Permission denied
The SELinux 'deny_ptrace' option is enabled and preventing GDB
from using 'ptrace'. You can disable it by executing (as root):
setsebool deny_ptrace off
If you are debugging the inferior remotely, the ptrace restriction(s) need
to be disabled in the target system (e.g., where GDBserver is running).
#
(I decided to keep all the other messages, even though I find them a
bit distracting).
If GDB can't determine the cause for the failure, it will still print
the generic error message which tells the user to check our
documentation:
There might be restrictions preventing ptrace from working. Please see
the appendix "Linux kernel ptrace restrictions" in the GDB documentation
for more details.
If you are debugging the inferior remotely, the ptrace restriction(s) need
to be disabled in the target system (e.g., where GDBserver is running).
This means that the patch expands our documentation and creates a new
appendix section named "Linux kernel ptrace restrictions", with
sub-sections for each possible restriction that might be in place.
Notice how, on every message, we instruct the user to "do the right
thing" if gdbserver is being used. This is because if the user
started gdbserver *before* any ptrace restriction was in place, and
then, for some reason, one or more restrictions get enabled, then the
error message will be displayed both on gdbserver *and* on the
connected GDB. Since the user will be piloting GDB, it's important to
explicitly say that the ptrace restrictions are enabled in the target,
where gdbserver is running.
The current list of possible restrictions is:
- SELinux's 'deny_ptrace' option (detected).
- YAMA's /proc/sys/kernel/yama/ptrace_scope setting (detected).
- seccomp on Docker containers (I couldn't find how to detect).
It's important to mention that all of this is Linux-specific; as far
as I know, SELinux, YAMA and seccomp are Linux-only features.
I tested this patch locally, on my Fedora 30 machine (actually, a
Fedora Rawhide VM), but I'm not proposing a testcase for it because of
the difficulty of writing one.
WDYT?
gdb/doc/ChangeLog:
2019-09-26 Sergio Durigan Junior <sergiodj@redhat.com>
* gdb.texinfo (Linux kernel ptrace restrictions): New appendix
section.
gdb/ChangeLog:
2019-09-26 Sergio Durigan Junior <sergiodj@redhat.com>
Jan Kratochvil <jan.kratochvil@redhat.com>
Pedro Alves <palves@redhat.com>
* gdbsupport/gdb-dlfcn.h (gdb_dlopen): Update comment and
mention that the function throws an error.
* inf-ptrace.c (default_inf_ptrace_me_fail_reason): New
function.
(inf_ptrace_me_fail_reason): New variable.
(inf_ptrace_me): Update call to 'trace_start_error_with_name'.
* inf-ptrace.h (inf_ptrace_me_fail_reason): New variable.
* linux-nat.c (attach_proc_task_lwp_callback): Call
'linux_ptrace_attach_fail_reason_lwp'.
(linux_nat_target::attach): Update call to
'linux_ptrace_attach_fail_reason'.
(_initialize_linux_nat): Set 'inf_ptrace_me_fail_reason'.
* nat/fork-inferior.c (trace_start_error_with_name): Add
optional 'append' argument.
* nat/fork-inferior.h (trace_start_error_with_name): Update
prototype.
* nat/linux-ptrace.c: Include "gdbsupport/gdb-dlfcn.h",
"gdbsupport/filestuff.h" and "nat/fork-inferior.h".
(selinux_ftype): New typedef.
(linux_ptrace_restricted_fail_reason): New function.
(linux_ptrace_attach_fail_reason_1): New function.
(linux_ptrace_attach_fail_reason): Change first argument type
from 'ptid_t' to 'pid_t'. Call
'linux_ptrace_attach_fail_reason_1' and
'linux_ptrace_restricted_fail_reason'.
(linux_ptrace_attach_fail_reason_lwp): New function.
(linux_ptrace_me_fail_reason): New function.
(errno_pipe): New variable.
(linux_fork_to_function): Initialize pipe before forking.
(linux_child_function): Deal with errno-passing from child.
Handle ptrace error.
(linux_check_child_ptrace_errno): New function.
(linux_check_child_ptrace_errno): Call
'linux_check_child_ptrace_errno'.
* nat/linux-ptrace.h (linux_ptrace_attach_fail_reason): Update
prototype.
(linux_ptrace_attach_fail_reason_lwp): New prototype.
(linux_ptrace_me_fail_reason): New prototype.
* remote.c (extended_remote_target::attach): Handle error
message passed by the server when attach fails.
gdb/gdbserver/ChangeLog:
2019-09-26 Sergio Durigan Junior <sergiodj@redhat.com>
Pedro Alves <palves@redhat.com>
* linux-low.c (linux_ptrace_fun): Call
'linux_ptrace_me_fail_reason'.
(attach_proc_task_lwp_callback): Call
'linux_ptrace_attach_fail_reason_lwp'.
(linux_attach): Call 'linux_ptrace_attach_fail_reason'.
* server.c (handle_v_attach): Use try..catch when calling
'attach_inferior', and send an error message to the client
when needed.
* thread-db.c (attach_thread): Call
'linux_ptrace_attach_fail_reason_lwp'.
|
|
gdb/ChangeLog:
2019-09-26 Christian Biesinger <cbiesinger@google.com>
* blockframe.c (find_pc_partial_function): Change return type to bool.
* elfread.c (elf_gnu_ifunc_resolve_name): Likewise.
* minsyms.c (in_gnu_ifunc_stub): Likewise.
(stub_gnu_ifunc_resolve_name): Likewise.
* symtab.c (compare_filenames_for_search): Likewise.
(compare_glob_filenames_for_search): Likewise.
(matching_obj_sections): Likewise.
(symbol_matches_domain): Likewise.
(find_line_symtab): Change out param EXACT_MATCH to bool *.
(find_line_pc): Change return type to bool.
(find_line_pc_range): Likewise.
(producer_is_realview): Likewise.
* symtab.h (symbol_matches_domain): Likewise.
(find_pc_partial_function): Likewise.
(find_pc_line_pc_range): Likewise.
(in_gnu_ifunc_stub): Likewise.
(struct gnu_ifunc_fns) <gnu_ifunc_resolve_name>: Likewise.
(find_line_pc): Likewise.
(find_line_pc_range): Likewise.
(matching_obj_sections): Likewise.
(find_line_symtab): Change out parameter to bool.
(producer_is_realview): Change return type to bool.
(compare_filenames_for_search): Likewise.
(compare_glob_filenames_for_search): Likewise.
|
|
I noticed that gdb_usleep is unused, so this patch removes it.
gdb/ChangeLog
2019-09-26 Tom Tromey <tom@tromey.com>
* Makefile.in (COMMON_SFILES): Remove gdb_usleep.c.
(HFILES_NO_SRCDIR): Remove gdb_usleep.h.
* gdb_usleep.h: Remove.
* gdb_usleep.c: Remove.
* utils.c: Don't include gdb_usleep.h.
|
|
dwarf2read.c will create stub types for Ada "Taft Amendment" types.
These stub types can currently be exposed to Python code, where they
show up as TYPE_CODE_VOID types (but that, mysteriously, can sometimes
be used in other ways).
While it's possible to work with such types by using strip_typedefs,
this seemed unpleasant to me. This patch takes another approach
instead, which is to try not to expose stub types to Python users.
gdb/ChangeLog
2019-09-26 Tom Tromey <tromey@adacore.com>
* python/py-type.c (type_to_type_object): Call check_typedef
for stub types.
gdb/testsuite/ChangeLog
2019-09-26 Tom Tromey <tromey@adacore.com>
* gdb.ada/py_taft.exp: New file.
* gdb.ada/py_taft/main.adb: New file.
* gdb.ada/py_taft/pkg.adb: New file.
* gdb.ada/py_taft/pkg.ads: New file.
|
|
initialize_utils only registers some commands, so it isn't necessary
to run it at any particular time during startup. This patch removes
it and merges its contents into _initialize_utils.
Tested by the buildbot.
gdb/ChangeLog
2019-09-26 Tom Tromey <tom@tromey.com>
* utils.h (initialize_utils): Don't declare.
* top.c (gdb_init): Don't call initialize_utils.
* utils.c (initialize_utils): Remove. Move contents...
(_initialize_utils): ... here.
|
|
I noticed that make_hex_string does essentially the same thing as
bin2hex, and furthermore is only called in a single spot. This patch
removes make_hex_string.
Tested by the builtbot.
gdb/ChangeLog
2019-09-25 Tom Tromey <tom@tromey.com>
* python/py-objfile.c (objfpy_get_build_id): Use bin2hex.
* utils.h (make_hex_string): Don't declare.
* utils.c (make_hex_string): Remove.
|
|
On my openSUSE Leap 15.1 x86_64 Skylake system with the default (4.12) kernel,
I run into:
...
FAIL: gdb.base/gcore.exp: corefile restored all registers
...
The problem is that there's a difference in the mxcsr register value before
and after the gcore command:
...
- mxcsr 0x0 [ ]
+ mxcsr 0x400440 [ DAZ OM ]
...
This can be traced back to amd64_linux_nat_target::fetch_registers, where
xstateregs is partially initialized by the ptrace call:
...
char xstateregs[X86_XSTATE_MAX_SIZE];
struct iovec iov;
amd64_collect_xsave (regcache, -1, xstateregs, 0);
iov.iov_base = xstateregs;
iov.iov_len = sizeof (xstateregs);
if (ptrace (PTRACE_GETREGSET, tid,
(unsigned int) NT_X86_XSTATE, (long) &iov) < 0)
perror_with_name (_("Couldn't get extended state status"));
amd64_supply_xsave (regcache, -1, xstateregs);
...
after which amd64_supply_xsave is called.
The amd64_supply_xsave call is supposed to only use initialized parts of
xstateregs, but due to a kernel bug on intel skylake (fixed from 4.14 onwards
by commit 0852b374173b "x86/fpu: Add FPU state copying quirk to handle XRSTOR
failure on Intel Skylake CPUs") it can happen that the mxcsr part of
xstateregs is not initialized, while amd64_supply_xsave expects it to be
initialized, which explains the FAIL mentioned above.
Fix the undetermined behaviour by initializing xstateregs before calling
ptrace, which makes sure we get a 0x0 for mxcsr when this kernel bug occurs,
and which also happens to fix the FAIL.
Furthermore, add an xfail for this FAIL which triggers the same kernel bug:
...
FAIL: gdb.arch/amd64-init-x87-values.exp: check_setting_mxcsr_before_enable: \
check new value of MXCSR is still in place
...
Both FAILs pass when using a 5.3 kernel instead on the system mentioned above.
Tested on x86_64-linux.
gdb/ChangeLog:
2019-09-24 Tom de Vries <tdevries@suse.de>
PR gdb/23815
* amd64-linux-nat.c (amd64_linux_nat_target::fetch_registers):
Initialize xstateregs before ptrace PTRACE_GETREGSET call.
gdb/testsuite/ChangeLog:
2019-09-24 Tom de Vries <tdevries@suse.de>
PR gdb/24598
* gdb.arch/amd64-init-x87-values.exp: Add xfail.
|
