diff options
Diffstat (limited to 'linux-headers/include/linux/mii.h')
| -rw-r--r-- | linux-headers/include/linux/mii.h | 21 |
1 files changed, 21 insertions, 0 deletions
diff --git a/linux-headers/include/linux/mii.h b/linux-headers/include/linux/mii.h index 3a9e4b7..2c7119d 100644 --- a/linux-headers/include/linux/mii.h +++ b/linux-headers/include/linux/mii.h @@ -121,6 +121,8 @@ #define EXPANSION_MFAULTS 0x0010 /* Multiple faults detected */ #define EXPANSION_RESV 0xffe0 /* Unused... */ +#define ESTATUS_1000_XFULL 0x8000 /* Can do 1000BaseX Full */ +#define ESTATUS_1000_XHALF 0x4000 /* Can do 1000BaseX Half */ #define ESTATUS_1000_TFULL 0x2000 /* Can do 1000BT Full */ #define ESTATUS_1000_THALF 0x1000 /* Can do 1000BT Half */ @@ -129,14 +131,33 @@ #define NWAYTEST_LOOPBACK 0x0100 /* Enable loopback for N-way */ #define NWAYTEST_RESV2 0xfe00 /* Unused... */ +/* MAC and PHY tx_config_Reg[15:0] for SGMII in-band auto-negotiation.*/ +#define ADVERTISE_SGMII 0x0001 /* MAC can do SGMII */ +#define LPA_SGMII 0x0001 /* PHY can do SGMII */ +#define LPA_SGMII_SPD_MASK 0x0c00 /* SGMII speed mask */ +#define LPA_SGMII_FULL_DUPLEX 0x1000 /* SGMII full duplex */ +#define LPA_SGMII_DPX_SPD_MASK 0x1C00 /* SGMII duplex and speed bits */ +#define LPA_SGMII_10 0x0000 /* 10Mbps */ +#define LPA_SGMII_10HALF 0x0000 /* Can do 10mbps half-duplex */ +#define LPA_SGMII_10FULL 0x1000 /* Can do 10mbps full-duplex */ +#define LPA_SGMII_100 0x0400 /* 100Mbps */ +#define LPA_SGMII_100HALF 0x0400 /* Can do 100mbps half-duplex */ +#define LPA_SGMII_100FULL 0x1400 /* Can do 100mbps full-duplex */ +#define LPA_SGMII_1000 0x0800 /* 1000Mbps */ +#define LPA_SGMII_1000HALF 0x0800 /* Can do 1000mbps half-duplex */ +#define LPA_SGMII_1000FULL 0x1800 /* Can do 1000mbps full-duplex */ +#define LPA_SGMII_LINK 0x8000 /* PHY link with copper-side partner */ + /* 1000BASE-T Control register */ #define ADVERTISE_1000FULL 0x0200 /* Advertise 1000BASE-T full duplex */ #define ADVERTISE_1000HALF 0x0100 /* Advertise 1000BASE-T half duplex */ +#define CTL1000_PREFER_MASTER 0x0400 /* prefer to operate as master */ #define CTL1000_AS_MASTER 0x0800 #define CTL1000_ENABLE_MASTER 0x1000 /* 1000BASE-T Status register */ #define LPA_1000MSFAIL 0x8000 /* Master/Slave resolution failure */ +#define LPA_1000MSRES 0x4000 /* Master/Slave resolution status */ #define LPA_1000LOCALRXOK 0x2000 /* Link partner local receiver status */ #define LPA_1000REMRXOK 0x1000 /* Link partner remote receiver status */ #define LPA_1000FULL 0x0800 /* Link partner 1000BASE-T full duplex */ |