From f4d2ff34bef1789eef9bed93572993ee023270e2 Mon Sep 17 00:00:00 2001 From: Rob Savoye Date: Mon, 20 May 1996 02:46:07 +0000 Subject: New sparc simulator from the ESA. --- sim/erc32/README.erc32 | 130 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 130 insertions(+) create mode 100644 sim/erc32/README.erc32 (limited to 'sim/erc32/README.erc32') diff --git a/sim/erc32/README.erc32 b/sim/erc32/README.erc32 new file mode 100644 index 0000000..f413599 --- /dev/null +++ b/sim/erc32/README.erc32 @@ -0,0 +1,130 @@ + +1. MEC and ERC32 emulation + +The file 'erc32.c' contains a model of the MEC, 512 K rom and 4 M ram. + +The following paragraphs outline the implemented MEC functions. + +1.1 UARTs + +The UARTs are connected to two pseudo-devices, /dev/ttypc and /dev/ttypd. +The following registers are implemeted: + +- UART A RX and TX register (0x01f800e0) +- UART B RX and TX register (0x01f800e4) +- UART status register (0x01f800e8) + +To speed up simulation, the UARTs operate at approximately 115200 baud. +The UARTs generate interrupt 4 and 5 after each received or transmitted +character. The error interrupt is generated if overflow occurs - other +errors cannot occure. + +1.2 Real-time clock and general pupose timer A + +The following registers are implemeted: + +- Real-time clock timer (0x01f80080, read-only) +- Real-time clock scaler program register (0x01f80084, write-only) +- Real-time clock counter program register (0x01f80080, write-only) + +- Genearl pupose timer (0x01f80088, read-only) +- Real-time clock scaler program register (0x01f8008c, write-only) +- General purpose timer counter prog. register (0x01f80088, write-only) + +- Timer control register (0x01f80098, write-only) + +1.3 Interrupt controller + +The interrupt controller is implemented as in the MEC specification with +the exception of the interrupt shape register. Since external interrupts +are not possible, the interrupt shape register is not implemented. The +only internal interrupts that are generated are the real-time clock, +the general purpose timer and UARTs. However, all 15 interrupts +can be tested via the interrupt force register. + +The following registers are implemeted: + +- Interrupt pending register (0x01f80048, read-only) +- Interrupt mask register (0x01f8004c, read-write) +- Interrupt clear register (0x01f80050, write-only) +- Interrupt force register (0x01f80054, read-write) + +1.4 Breakpoint and watchpoint register + +The breakpoint and watchpoint functions are implemented as in the MEC +specification. Traps are correctly generated, and the system fault status +register is updated accordingly. Implemeted registers are: + +- Debug control register (0x01f800c0, read-write) +- Breakpoint register (0x01f800c4, write-only) +- Watchpoint register (0x01f800c8, write-only) +- System fault status register (0x01f800a0, read-write) +- Firts failing address register (0x01f800a4, read-write) + + +1.5 Memory interface + +The following memory areas are valid for the ERC32 simulator: + +0x00000000 - 0x00080000 ROM (512 Kbyte, loaded at start-up) +0x02000000 - 0x02400000 RAM (4 Mbyte, initialised to 0x0) +0x01f80000 - 0x01f800ff MEC registers + +Access to unimplemented MEC registers or non-existing memory will result +in a memory exception trap. However, access to unimplemented MEC registers +in the area 0x01f80000 - 0x01f80100 will not cause a memory exception trap. +The written value will be stored in a register and can be read back. It +does however not affect the function in any way. + +The memory configuartion register is used to define available memory +in the system. The fields RSIZ and PSIZ are used to set RAM and ROM +size, the remaining fields are not used. NOTE: after reset, the MEC +is set to decode 4 Kbyte of ROM and 256 Kbyte of RAM. The memory +configuration register has to be updated to reflect the available memory. + +The waitstate configuration register is used to generate waitstates. +This register must also be updated with the correct configuration after +reset. + +The memory protection scheme is implemented - it is enabled through bit 3 +in the MEC control register. + +The following registers are implemeted: + +- MEC control register (bit 3 only) (0x01f80000, read-write) +- Memory control register (0x01f80010, read-write) +- Waitstate configuration register (0x01f80018, read-write) +- Memory access register 0 (0x01f80020, read-write) +- Memory access register 1 (0x01f80024, read-write) + +1.6 Watchdog + +The watchdog is implemented as in the specification. The input clock is +always the system clock regardsless of WDCS bit in mec configuration +register. + +The following registers are implemeted: + +- Watchdog program and acknowledge register (0x01f80060, write-only) +- Watchdog trap door set register (0x01f80064, write-only) + +1.7 Software reset register + +Implemented as in the specification (0x01f800004, write-only). + +1.8 Power-down mode + +The power-down register (0x01f800008) is implemented as in the specification. +However, if the simulator event queue is empty, power-down mode is not +entered since no interrupt would be generated to exit from the mode. A +Ctrl-C in the simulator window will exit the power-down mode. + +1.9 MEC control register + +The following bits are implemented in the MEC control register: + +Bit Name Function +0 PRD Power-down mode enable +1 SWR Soft reset enable +3 APR Access protection enable + -- cgit v1.1