From 33f8fe58b9a55a0075a90cc9080a1716221a3f81 Mon Sep 17 00:00:00 2001 From: Pedro Alves Date: Fri, 22 Nov 2013 11:51:59 +0000 Subject: Don't let two frames with the same id end up in the frame chain. The UNWIND_SAME_ID check is done between THIS_FRAME and the next frame when we go try to unwind the previous frame. But at this point, it's already too late -- we ended up with two frames with the same ID in the frame chain. Each frame having its own ID is an invariant assumed throughout GDB. This patch applies the UNWIND_SAME_ID detection earlier, right after the previous frame is unwound, discarding the dup frame if a cycle is detected. The patch includes a new test that fails before the change. Before the patch, the test causes an infinite loop in GDB, after the patch, the UNWIND_SAME_ID logic kicks in and makes the backtrace stop with: Backtrace stopped: previous frame identical to this frame (corrupt stack?) The test uses dwarf CFI to emulate a corrupted stack with a cycle. It has a function with registers marked DW_CFA_same_value (most importantly RSP/RIP), so that GDB computes the same ID for that frame and its caller. IOW, something like this: #0 - frame_id_1 #1 - frame_id_2 #2 - frame_id_3 #3 - frame_id_4 #4 - frame_id_4 <<<< outermost (UNWIND_SAME_ID). (The test's code is just a copy of dw2-reg-undefined.S / dw2-reg-undefined.c, adjusted to use DW_CFA_same_value instead of DW_CFA_undefined, and to mark a different set of registers.) The infinite loop is here, in value_fetch_lazy: while (VALUE_LVAL (new_val) == lval_register && value_lazy (new_val)) { frame = frame_find_by_id (VALUE_FRAME_ID (new_val)); ... new_val = get_frame_register_value (frame, regnum); } get_frame_register_value can return a lazy register value pointing to the next frame. This means that the register wasn't clobbered by FRAME; the debugger should therefore retrieve its value from the next frame. To be clear, get_frame_register_value unwinds the value in question from the next frame: struct value * get_frame_register_value (struct frame_info *frame, int regnum) { return frame_unwind_register_value (frame->next, regnum); ^^^^^^^^^^^ } In other words, if we get a lazy lval_register, it should have the frame ID of the _next_ frame, never of FRAME. At this point in value_fetch_lazy, the whole relevant chunk of the stack up to frame #4 has already been unwound. The loop always "unlazies" lval_registers in the "next/innermost" direction, not in the "prev/unwind further/outermost" direction. So say we're looking at frame #4. get_frame_register_value in frame #4 can return a lazy register value of frame #3. So the next iteration, frame_find_by_id tries to read the register from frame #3. But, since frame #4 happens to have same id as frame #3, frame_find_by_id returns frame #4 instead. Rinse, repeat, and we have an infinite loop. This is an old latent problem, exposed by the recent addition of the frame stash. Before we had a stash, frame_find_by_id(frame_id_4) would walk over all frames starting at the current frame, and would always find #3 first. The stash happens to return #4 instead: struct frame_info * frame_find_by_id (struct frame_id id) { struct frame_info *frame, *prev_frame; ... /* Try using the frame stash first. Finding it there removes the need to perform the search by looping over all frames, which can be very CPU-intensive if the number of frames is very high (the loop is O(n) and get_prev_frame performs a series of checks that are relatively expensive). This optimization is particularly useful when this function is called from another function (such as value_fetch_lazy, case VALUE_LVAL (val) == lval_register) which already loops over all frames, making the overall behavior O(n^2). */ frame = frame_stash_find (id); if (frame) return frame; for (frame = get_current_frame (); ; frame = prev_frame) { gdb/ 2013-11-22 Pedro Alves PR 16155 * frame.c (get_prev_frame_1): Do the UNWIND_SAME_ID check between this frame and the new previous frame, not between this frame and the next frame. gdb/testsuite/ 2013-11-22 Pedro Alves PR 16155 * gdb.dwarf2/dw2-dup-frame.S: New file. * gdb.dwarf2/dw2-dup-frame.c: New file. * gdb.dwarf2/dw2-dup-frame.exp: New file. --- gdb/testsuite/ChangeLog | 7 + gdb/testsuite/gdb.dwarf2/dw2-dup-frame.S | 540 +++++++++++++++++++++++++++++ gdb/testsuite/gdb.dwarf2/dw2-dup-frame.c | 36 ++ gdb/testsuite/gdb.dwarf2/dw2-dup-frame.exp | 44 +++ 4 files changed, 627 insertions(+) create mode 100644 gdb/testsuite/gdb.dwarf2/dw2-dup-frame.S create mode 100644 gdb/testsuite/gdb.dwarf2/dw2-dup-frame.c create mode 100644 gdb/testsuite/gdb.dwarf2/dw2-dup-frame.exp (limited to 'gdb/testsuite') diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 58d2bc7..0135ece 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,10 @@ +2013-11-22 Pedro Alves + + PR 16155 + * gdb.dwarf2/dw2-dup-frame.S: New file. + * gdb.dwarf2/dw2-dup-frame.c: New file. + * gdb.dwarf2/dw2-dup-frame.exp: New file. + 2013-11-22 Yao Qi * lib/mi-support.exp (mi_create_dynamic_varobj): Update diff --git a/gdb/testsuite/gdb.dwarf2/dw2-dup-frame.S b/gdb/testsuite/gdb.dwarf2/dw2-dup-frame.S new file mode 100644 index 0000000..4c3bd76 --- /dev/null +++ b/gdb/testsuite/gdb.dwarf2/dw2-dup-frame.S @@ -0,0 +1,540 @@ +/* + Copyright 2013 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + + /* The FDE entry for "stop_frame" in the .debug_frame section has + been hand modified to mark a set of registers as DW_CFA_same_value. + Otherwise this file is as generated by gcc 4.7.2 for x86_64. */ + .file "dw2-dup-frame.c" + .text +.Ltext0: + .globl stop_frame + .type stop_frame, @function +stop_frame: +.LFB0: + .file 1 "dw2-dup-frame.c" + .loc 1 19 0 + pushq %rbp +.LCFI0: + movq %rsp, %rbp +.LCFI1: + .loc 1 22 0 + popq %rbp +.LCFI2: + ret +.LFE0: + .size stop_frame, .-stop_frame + .globl first_frame + .type first_frame, @function +first_frame: +.LFB1: + .loc 1 26 0 + pushq %rbp +.LCFI3: + movq %rsp, %rbp +.LCFI4: + .loc 1 27 0 + movl $0, %eax + call stop_frame + .loc 1 28 0 + popq %rbp +.LCFI5: + ret +.LFE1: + .size first_frame, .-first_frame + .globl main + .type main, @function +main: +.LFB2: + .loc 1 32 0 + pushq %rbp +.LCFI6: + movq %rsp, %rbp +.LCFI7: + .loc 1 33 0 + movl $0, %eax + call first_frame + .loc 1 35 0 + movl $0, %eax + .loc 1 36 0 + popq %rbp +.LCFI8: + ret +.LFE2: + .size main, .-main + .section .debug_frame,"",@progbits +.Lframe0: + .long .LECIE0-.LSCIE0 +.LSCIE0: + .long 0xffffffff + .byte 0x1 + .string "" + .uleb128 0x1 + .sleb128 -8 + .byte 0x10 + .byte 0xc + .uleb128 0x7 + .uleb128 0x8 + .byte 0x90 + .uleb128 0x1 + .align 8 +.LECIE0: + /* This FDE entry, for stop_frame was modified to mark + registers 0 -> 16 (rax..ra/rip) as being DW_CFA_same_value. */ +.LSFDE0: + .long .LEFDE0-.LASFDE0 +.LASFDE0: + .long .Lframe0 + .quad .LFB0 + .quad .LFE0-.LFB0 + + /* START OF NEW CONTENT. */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0x0 /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0x1 /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0x2 /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0x3 /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0x4 /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0x5 /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0x6 /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0x7 /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0x8 /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0x9 /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0xa /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0xb /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0xc /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0xd /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0xe /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0xf /* ULEB128 register */ + .byte 0x8 /* DW_CFA_same_value */ + .uleb128 0x10 /* ULEB128 register */ + /* END OF NEW CONTENT. */ + + .byte 0x4 + .long .LCFI0-.LFB0 + .byte 0xe + .uleb128 0x10 + .byte 0x86 + .uleb128 0x2 + .byte 0x4 + .long .LCFI1-.LCFI0 + .byte 0xd + .uleb128 0x6 + .byte 0x4 + .long .LCFI2-.LCFI1 + .byte 0xc + .uleb128 0x7 + .uleb128 0x8 + .align 8 +.LEFDE0: +.LSFDE2: + .long .LEFDE2-.LASFDE2 +.LASFDE2: + .long .Lframe0 + .quad .LFB1 + .quad .LFE1-.LFB1 + .byte 0x4 + .long .LCFI3-.LFB1 + .byte 0xe + .uleb128 0x10 + .byte 0x86 + .uleb128 0x2 + .byte 0x4 + .long .LCFI4-.LCFI3 + .byte 0xd + .uleb128 0x6 + .byte 0x4 + .long .LCFI5-.LCFI4 + .byte 0xc + .uleb128 0x7 + .uleb128 0x8 + .align 8 +.LEFDE2: +.LSFDE4: + .long .LEFDE4-.LASFDE4 +.LASFDE4: + .long .Lframe0 + .quad .LFB2 + .quad .LFE2-.LFB2 + .byte 0x4 + .long .LCFI6-.LFB2 + .byte 0xe + .uleb128 0x10 + .byte 0x86 + .uleb128 0x2 + .byte 0x4 + .long .LCFI7-.LCFI6 + .byte 0xd + .uleb128 0x6 + .byte 0x4 + .long .LCFI8-.LCFI7 + .byte 0xc + .uleb128 0x7 + .uleb128 0x8 + .align 8 +.LEFDE4: + .section .eh_frame,"a",@progbits +.Lframe1: + .long .LECIE1-.LSCIE1 +.LSCIE1: + .long 0 + .byte 0x1 + .string "zR" + .uleb128 0x1 + .sleb128 -8 + .byte 0x10 + .uleb128 0x1 + .byte 0x3 + .byte 0xc + .uleb128 0x7 + .uleb128 0x8 + .byte 0x90 + .uleb128 0x1 + .align 8 +.LECIE1: +.LSFDE7: + .long .LEFDE7-.LASFDE7 +.LASFDE7: + .long .LASFDE7-.Lframe1 + .long .LFB0 + .long .LFE0-.LFB0 + .uleb128 0 + .byte 0x4 + .long .LCFI0-.LFB0 + .byte 0xe + .uleb128 0x10 + .byte 0x86 + .uleb128 0x2 + .byte 0x4 + .long .LCFI1-.LCFI0 + .byte 0xd + .uleb128 0x6 + .byte 0x4 + .long .LCFI2-.LCFI1 + .byte 0xc + .uleb128 0x7 + .uleb128 0x8 + .align 8 +.LEFDE7: +.LSFDE9: + .long .LEFDE9-.LASFDE9 +.LASFDE9: + .long .LASFDE9-.Lframe1 + .long .LFB1 + .long .LFE1-.LFB1 + .uleb128 0 + .byte 0x4 + .long .LCFI3-.LFB1 + .byte 0xe + .uleb128 0x10 + .byte 0x86 + .uleb128 0x2 + .byte 0x4 + .long .LCFI4-.LCFI3 + .byte 0xd + .uleb128 0x6 + .byte 0x4 + .long .LCFI5-.LCFI4 + .byte 0xc + .uleb128 0x7 + .uleb128 0x8 + .align 8 +.LEFDE9: +.LSFDE11: + .long .LEFDE11-.LASFDE11 +.LASFDE11: + .long .LASFDE11-.Lframe1 + .long .LFB2 + .long .LFE2-.LFB2 + .uleb128 0 + .byte 0x4 + .long .LCFI6-.LFB2 + .byte 0xe + .uleb128 0x10 + .byte 0x86 + .uleb128 0x2 + .byte 0x4 + .long .LCFI7-.LCFI6 + .byte 0xd + .uleb128 0x6 + .byte 0x4 + .long .LCFI8-.LCFI7 + .byte 0xc + .uleb128 0x7 + .uleb128 0x8 + .align 8 +.LEFDE11: + .text +.Letext0: + .section .debug_info,"",@progbits +.Ldebug_info0: + .long 0x8c + .value 0x2 + .long .Ldebug_abbrev0 + .byte 0x8 + .uleb128 0x1 + .long .LASF2 + .byte 0x1 + .long .LASF3 + .long .LASF4 + .quad .Ltext0 + .quad .Letext0 + .long .Ldebug_line0 + .uleb128 0x2 + .byte 0x1 + .long .LASF0 + .byte 0x1 + .byte 0x12 + .quad .LFB0 + .quad .LFE0 + .long .LLST0 + .byte 0x1 + .uleb128 0x3 + .byte 0x1 + .long .LASF1 + .byte 0x1 + .byte 0x19 + .quad .LFB1 + .quad .LFE1 + .long .LLST1 + .byte 0x1 + .uleb128 0x4 + .byte 0x1 + .long .LASF5 + .byte 0x1 + .byte 0x1f + .long 0x88 + .quad .LFB2 + .quad .LFE2 + .long .LLST2 + .byte 0x1 + .uleb128 0x5 + .byte 0x4 + .byte 0x5 + .string "int" + .byte 0 + .section .debug_abbrev,"",@progbits +.Ldebug_abbrev0: + .uleb128 0x1 + .uleb128 0x11 + .byte 0x1 + .uleb128 0x25 + .uleb128 0xe + .uleb128 0x13 + .uleb128 0xb + .uleb128 0x3 + .uleb128 0xe + .uleb128 0x1b + .uleb128 0xe + .uleb128 0x11 + .uleb128 0x1 + .uleb128 0x12 + .uleb128 0x1 + .uleb128 0x10 + .uleb128 0x6 + .byte 0 + .byte 0 + .uleb128 0x2 + .uleb128 0x2e + .byte 0 + .uleb128 0x3f + .uleb128 0xc + .uleb128 0x3 + .uleb128 0xe + .uleb128 0x3a + .uleb128 0xb + .uleb128 0x3b + .uleb128 0xb + .uleb128 0x11 + .uleb128 0x1 + .uleb128 0x12 + .uleb128 0x1 + .uleb128 0x40 + .uleb128 0x6 + .uleb128 0x2117 + .uleb128 0xc + .byte 0 + .byte 0 + .uleb128 0x3 + .uleb128 0x2e + .byte 0 + .uleb128 0x3f + .uleb128 0xc + .uleb128 0x3 + .uleb128 0xe + .uleb128 0x3a + .uleb128 0xb + .uleb128 0x3b + .uleb128 0xb + .uleb128 0x11 + .uleb128 0x1 + .uleb128 0x12 + .uleb128 0x1 + .uleb128 0x40 + .uleb128 0x6 + .uleb128 0x2116 + .uleb128 0xc + .byte 0 + .byte 0 + .uleb128 0x4 + .uleb128 0x2e + .byte 0 + .uleb128 0x3f + .uleb128 0xc + .uleb128 0x3 + .uleb128 0xe + .uleb128 0x3a + .uleb128 0xb + .uleb128 0x3b + .uleb128 0xb + .uleb128 0x49 + .uleb128 0x13 + .uleb128 0x11 + .uleb128 0x1 + .uleb128 0x12 + .uleb128 0x1 + .uleb128 0x40 + .uleb128 0x6 + .uleb128 0x2116 + .uleb128 0xc + .byte 0 + .byte 0 + .uleb128 0x5 + .uleb128 0x24 + .byte 0 + .uleb128 0xb + .uleb128 0xb + .uleb128 0x3e + .uleb128 0xb + .uleb128 0x3 + .uleb128 0x8 + .byte 0 + .byte 0 + .byte 0 + .section .debug_loc,"",@progbits +.Ldebug_loc0: +.LLST0: + .quad .LFB0-.Ltext0 + .quad .LCFI0-.Ltext0 + .value 0x2 + .byte 0x77 + .sleb128 8 + .quad .LCFI0-.Ltext0 + .quad .LCFI1-.Ltext0 + .value 0x2 + .byte 0x77 + .sleb128 16 + .quad .LCFI1-.Ltext0 + .quad .LCFI2-.Ltext0 + .value 0x2 + .byte 0x76 + .sleb128 16 + .quad .LCFI2-.Ltext0 + .quad .LFE0-.Ltext0 + .value 0x2 + .byte 0x77 + .sleb128 8 + .quad 0 + .quad 0 +.LLST1: + .quad .LFB1-.Ltext0 + .quad .LCFI3-.Ltext0 + .value 0x2 + .byte 0x77 + .sleb128 8 + .quad .LCFI3-.Ltext0 + .quad .LCFI4-.Ltext0 + .value 0x2 + .byte 0x77 + .sleb128 16 + .quad .LCFI4-.Ltext0 + .quad .LCFI5-.Ltext0 + .value 0x2 + .byte 0x76 + .sleb128 16 + .quad .LCFI5-.Ltext0 + .quad .LFE1-.Ltext0 + .value 0x2 + .byte 0x77 + .sleb128 8 + .quad 0 + .quad 0 +.LLST2: + .quad .LFB2-.Ltext0 + .quad .LCFI6-.Ltext0 + .value 0x2 + .byte 0x77 + .sleb128 8 + .quad .LCFI6-.Ltext0 + .quad .LCFI7-.Ltext0 + .value 0x2 + .byte 0x77 + .sleb128 16 + .quad .LCFI7-.Ltext0 + .quad .LCFI8-.Ltext0 + .value 0x2 + .byte 0x76 + .sleb128 16 + .quad .LCFI8-.Ltext0 + .quad .LFE2-.Ltext0 + .value 0x2 + .byte 0x77 + .sleb128 8 + .quad 0 + .quad 0 + .section .debug_aranges,"",@progbits + .long 0x2c + .value 0x2 + .long .Ldebug_info0 + .byte 0x8 + .byte 0 + .value 0 + .value 0 + .quad .Ltext0 + .quad .Letext0-.Ltext0 + .quad 0 + .quad 0 + .section .debug_line,"",@progbits +.Ldebug_line0: + .section .debug_str,"MS",@progbits,1 +.LASF0: + .string "stop_frame" +.LASF3: + .string "dw2-reg-undefined.c" +.LASF2: + .string "GNU C 4.7.2" +.LASF1: + .string "first_frame" +.LASF5: + .string "main" +.LASF4: + .string "/home/username/src/gdb/testsuite/gdb.dwarf2" + .ident "GCC: (GNU) 4.7.2" + .section .note.GNU-stack,"",@progbits diff --git a/gdb/testsuite/gdb.dwarf2/dw2-dup-frame.c b/gdb/testsuite/gdb.dwarf2/dw2-dup-frame.c new file mode 100644 index 0000000..4868d05 --- /dev/null +++ b/gdb/testsuite/gdb.dwarf2/dw2-dup-frame.c @@ -0,0 +1,36 @@ +/* + Copyright 2013 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +void +stop_frame () +{ + /* The debug information for this frame is modified in the accompanying + .S file, to mark a set of registers as being DW_CFA_same_value. */ +} + +void +first_frame () +{ + stop_frame (); +} + +int +main () +{ + first_frame (); + + return 0; +} diff --git a/gdb/testsuite/gdb.dwarf2/dw2-dup-frame.exp b/gdb/testsuite/gdb.dwarf2/dw2-dup-frame.exp new file mode 100644 index 0000000..a57ab8a --- /dev/null +++ b/gdb/testsuite/gdb.dwarf2/dw2-dup-frame.exp @@ -0,0 +1,44 @@ +# Copyright 2013 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +load_lib dwarf.exp + +# This test can only be run on targets which support DWARF-2 and use gas. +if {![dwarf2_support]} { + return 0 +} + +# This test can only be run on x86_64 targets. +if {![istarget "x86_64-*-*"] || ![is_lp64_target]} { + return 0 +} + +standard_testfile .S + +if { [prepare_for_testing $testfile.exp $testfile $srcfile {nodebug}] } { + return -1 +} + +if ![runto stop_frame] { + perror "Failed to stop in stop_frame" + return -1 +} + +gdb_test "bt" \ + "#0 stop_frame \[^\r\n\]*\r\nBacktrace stopped: previous frame identical to this frame \\(corrupt stack\\?\\)" \ + "backtrace from stop_frame" + +gdb_test "up" \ + "Initial frame selected; you cannot go up\\\." \ + "up from stop_frame" -- cgit v1.1